NEW COMPATIBLE ISO Validate the compliance of your samples with a single gesture. The test tube temperature tracker

Transcription

1 The test tube temperature tracker Validate the compliance of your samples with a single gesture NEW COMPATIBLE ISO Calibrate yourself your Nanotrack!

2 Ensure the temperature traceability of your samples in a very simple way! Nanotrack is the first test tube able to record the temperature of biological samples during the pre-analytical phase, e.g. when your steed team transport samples from collecting points to your laboratory or technical platform for analysis. This temperature tracker is made specifically for biomedical laboratories who have to ensure the traceability of biological samples in accordance with the NF-EN-ISO norm. Extremely simple of use, it allows to check the compliance of biological samples with only a pressure on its cap. Its system of LED alerts the user when the temperature of the samples has gone through critical thresholds.

3 The advantages of the control tube Fast Only one finger push on the Nanotrack cap is needed to check the compliance of your samples. A continuous push (5 seconds) on the cap resets the Nanotrack Practical The Nanotrack control tube fits in most of traditional biological samples transport boxes. Nanotrack sizes are equal to a 7mL test tube (14 mm x 120 mm). Simple The colored LED display validates the samples compliance. Green LED means that the samples have been maintained in an acceptable temperature range during their transportation. Calibratable Calibrate your Nanotrack yourself in accordance with the ISO norm. With our free tablet application, calibrate your Nanotrack straight in the laboratory. Representative The Nanotrack tube features a thermal inertia that avoids unjustified detection of thresholds. The integrated temperature sensor measures the temperature perceived by the sample. It does not record the ambient temperature.

4 9 configurations to perfectly fit your needs Several combinations available: 3 temperature ranges 3 type of activation delay (15 min, 30 min or 60 min) Nanotrack Ambient 15 / 25 C Range 30 C 25 C 15 / 25 C 15 C 10 C OK Delay 15 min Delay 30 min Delay 60 min Nanotrack Refrigerated 2 / 8 C Range 10 C 8 C 2 / 8 C 2 C 0 C OK Delay 15 min Delay 30 min Delay 60 min Nanotrack Frozen -30 / -10 C 0 C -10 C Range -30 / -10 C -30 C -40 C OK Delay 15 min Delay 30 min Delay 60 min Choose your activation delay (15, 30 or 60 minutes). When the Nanotrack measures a temperature above a threshold, the corresponding LED is not immediatly activated. The temperature should go over the threshold longer than the minimum delay for the Nanotrack to register the non-compliance.

5 Easy analysis of your temperature records thanks to our online application By entering online the results given by the Nanotrack, you can quickly get an analysis of the compliance of your samples. After putting in place corrective actions, results become better and gaps keep reducing. Step 1 Connect to website Online software, no install, Mac, Windows, Linux compatible Accessible from any place. More Nanolike offers online trainings to help its clients to optimize their use of Nanotrack. Step 2 Enter the temperature record given by the Nanotrack A simple interface allows to save online the temperature records in a few clics. Step 3 Analyze the results of the temperature records Either thanks to the statistical reports automatically generated Either by downloading all the data in a unique Excel format file

6 Testimonies Julie. 27 y/o. Nurse. Every morning, I go to my patient s home to get blood samples. When done, I put the samples in my case with my Nanotrack. I am now sure that during the transport the temperature will be correctly measured thanks to this test tube. I just have to press the cap for 5 seconds to reset the measure and I'm ready to leave. Than I can very easily insert the Nanotrack in the collecting box as it has a shape of tube! Once arrived, pressing shortly the button allows the biologist to check directly yhe compliance of my samples. Stéphane. 38 y/o. Quality specialist. Following our last ISO audit, we had to find a way to monitor the temperature of biological samples we transport between our different labs. We decided to order Nanotrack because they are very simple tu use and by using them we save a lot of time (and money) in our quality processes. The Nanotrack records the temperature of transported samples and give us directly the results with thresholds and colors. A green, orange or red light shines and I just have to go to to enter in a few clics the results in the online software and save the history of my temperature records. Graphical creation: Nanotrack is a product designed and made by: More information on: + info: Phone : +33 (0) sales@nanolike.com