Better Learning. ECEDHA 2013 Clint Cole, Digilent

Size: px
Start display at page:

Download "Better Learning. ECEDHA 2013 Clint Cole, Digilent"

Transcription

1 Better Learning ECEDHA 2013 Clint Cole, Digilent

2 ECE Department Heads are the most important people in the world.

3 Engineering is Fun

4 We re starting early and building excitement

5 Introductory hands-on engineering classes are popular

6 But then Pack students in labs Make them perform assigned tasks in allotted time (follow the recipe) Equipment stays in lab; must learn its use while performing required tasks Incented to stay on task (work don t play), get done and leave De-incented to find and explore knowledge gaps (peer pressure) Repeat weekly

7 Are we suggesting... Obedience and conformity are valuable engineering skills? Engineering/creative processes are well quantified, with predefined end points? Design skill/success is measurable against an absolute scale? Real engineering tasks will occur in a similar sandbox?

8 And faculty must Schedule labs Ensure PCs work, or try to buy new ones Ensure CAD tools still run Ensure student accounts are up Ensure equipment still works Reorder books/manuals Find adequate TAs Find a way to employ adequate TAs Deal with issues

9 A better way.

10 Makers are Learners It s human nature to build, create, explore Give students design tools and they ll use them whether or not they re required Encourage students to explore, discover and build they will Incent students to make, guide their activities, encourage sound design methods, and build excitement, vitality, relevance, & fun

11 Active Learning Works Have students build lots of real systems Simulations are good, but end-points are models Physical projects invite curiosity & exploration Dwell when/where needed Learn self reliance, self confidence Learn to use modeling and simulation at same time The Key: Design kits students can use any time, any place, and at their own pace

12 Student Owned Kits: A New Standard Student with their own kits Learn more, learn faster, retain more Score higher on tests Complete more assignments Use fewer resources Enjoy their experience Supported by Studies published in proceedings of ASEE

13 Requirements 1. Low-cost, powerful, self-contained design kits 2. High-quality, freely posted, community supported projects, tutorials, examples, reference designs, etc. 3. On-line course/educative materials 4. Effective support

14 Powerful design kits every student can own

15 Analog Design Oscilloscope Voltmeter Waveform Generator Power Supply Logic Analyzer Pattern Generator Spectrum Analyzer Network Analyzer

16 Two Analog Input Channels Fully differential, 5MHz, 100MSPS, 14-bit, ±25V Two Waveform Generators 5MHz, 100MSPS, 14-bit, ±5V Logic Analyzer 16-channel, 100MSPS, 4KSa per pin, up to 5V Digital Pattern Generator 16-channel, 100MSPS, 4KSa per pin Improved! Network Analyzer Bode, Nyquist and Nichols plots New! Spectrum Analyzer FFT or CZT algorithm, many display options Two Power Supplies +5VDC and -5VDC 50mA power supplies Voltmeter Two channel, shows DC, true & AC RMS, ±20V Digital Logic Trainer Virtual Buttons, switches, LEDs, etc. Specifications Self-contained, USB powered Hi-Speed USB2 data transfers Hooks to PC s audio system Waveforms can be played over integral audio jack Data files import/export to Office apps Integral help screens with contextual help Cross-instrument triggering Multiple Discovery s can be linked

17 Oscilloscope Can show both differential channels, plus 16 digital channels, plus math channels Time base: 10ns to 1hr/div Complex math, real-time FFT, and XY functions on all traces Full cursors and measurements Links to PC s audio output Multiple history buffers, reference waveforms, and data output options All data can be exported for later analysis.

18 Waveform Generator Basic mode has easy-toconfigure basic waveshapes Complex waveforms (damped, swept, and user defined), and AM/FM modulation Links to PC s audio system; channel 1 drives headphone port

19 Logic analyzer & Pattern Generator 16-channel analyzer, up to 8K buffer per pin, internal/external clock and trigger Trigger on single signal or bus pattern 16-channel PG (shared with LA), 2K buffer per pin, trigger input & auto-patterns Bus with bus view (selectable radix) and analog views available on both

20 Network Analyzer Stimulates circuit with swept sine (10 decades+) and records response at each frequency Plots magnitude and phase response (Bode plot), as well as Nyquist and Nichols plots

21 New! Spectrum Analyzer FFT and CZT algorithms; center/span and start/stop modes; linear or log scales Peak tracking; multiple windowing options; powerful cursors and measurments

22 $199 List Price $159 Academic $99 Student Price* *must be actively enrolled as an engineering student in a qualified degree-granting engineering school

23 Want One?

24 Analog Parts Kit More than 20 IC s from Analog Devices AD822 Instrumentation Amp Analog Parts Kit ADTL082 JFET Amp AD8541 Op Amp ADP3300 Voltage Regulator AD584 Voltage Reference AD654 Timer AD8561 Comparator OP27 Op Amp AD22151Magnetic Field Sensor ADXL327 Accelerometer ADMP504 Microphone AD22100 Temp Sensor And More

25 Analog Parts Kit Sensors Current Monitor Magnetic Field Sensor Accelerometer Microphone Temperature Vibration Light

26 Analog Parts Kit Discrete Semiconductors Matched PNP Transistors Matched NPN Transistors IR Transistor 2N3904 NPN Transistors 2N3906 PNP Transistors TIP31CFS NPN Transistor TIP32CFS PNP Transistor ZVN2110A N-channel MOSFET ZVP2110A P-channel MOSFET Green, Orange, RED LEDs QED-123 IR LED 7 Diodes

27 Analog Parts Kit Resistors 10W 6.2Ω Power Resistor 100 Resistors - 1.1Ω to 10MΩ 5kΩ Potentiometer 10kΩ Potentiometer 50kΩ Potentiometer Inductors 1 uh and 1mH coils Capacitors 25 Capacitors 39pF to 220uF And More Solderless Breadboard, Screwdriver 70+ high-quality jumper wires, Speaker

28 Analog Parts Kit Contains everything needed for circuits 1, circuits 2 and electronics courses $49 with purchase of Analog Discovery $59 Stand-alone

29 Want One?

30 Microprocessor & Digital Design Low-cost, powerful design kits USB powered Self-contained, ready to use Lots of well designed projects Lots of reference designs and materials Effective support $49

31 Digital Design

32 Nexys-4: Our Best Yet Xilinx Artix XC7A100T State of the art, large FPGA with lots of resources Lots of useful devices 16Mbytes RAM and ROM Ethernet, USB, UART, and VGA Buttons, switches, LEDs Analog Devices accelerometer, digital microphone, temp sensor, speaker amp Outstanding support Free CAD software, free tutorials, reference designs and educational materials

33 Want One?

34 Microcontroller Design

35 Microcontroller Design Microchip 32-bit MIPS 80MHz, 512K ROM, 128K RAM Lots of useful devices Ethernet, USB, UART, CAN 16 A/D channels, I2C, Pmods Outstanding support Works with Arduino/ChipKIT IDE On-board debugger Lots of projects Cerebot MX7 $99

36 Want One?

37 Student Owned Design Kits World-class technology, low cost, free tools Better for students they learn more and like it Better for instructors always current, less hassle, lots of free support materials Better for schools lower cost, less maintenance Proven effectiveness Available now

38 Student Owned Design Kits They work. They make everyone s job easier. You should use them at your school.

The object of this experiment is to become familiar with the instruments used in the low noise laboratory.

The object of this experiment is to become familiar with the instruments used in the low noise laboratory. 0. ORIENTATION 0.1 Object The object of this experiment is to become familiar with the instruments used in the low noise laboratory. 0.2 Parts The following parts are required for this experiment: 1. A

More information

ECE 6416 Low-Noise Electronics Orientation Experiment

ECE 6416 Low-Noise Electronics Orientation Experiment ECE 6416 Low-Noise Electronics Orientation Experiment Object The object of this experiment is to become familiar with the instruments used in the low noise laboratory. Parts The following parts are required

More information

Page 1/10 Digilent Analog Discovery (DAD) Tutorial 6-Aug-15. Figure 2: DAD pin configuration

Page 1/10 Digilent Analog Discovery (DAD) Tutorial 6-Aug-15. Figure 2: DAD pin configuration Page 1/10 Digilent Analog Discovery (DAD) Tutorial 6-Aug-15 INTRODUCTION The Diligent Analog Discovery (DAD) allows you to design and test both analog and digital circuits. It can produce, measure and

More information

Laboratory #4: Solid-State Switches, Operational Amplifiers Electrical and Computer Engineering EE University of Saskatchewan

Laboratory #4: Solid-State Switches, Operational Amplifiers Electrical and Computer Engineering EE University of Saskatchewan Authors: Denard Lynch Date: Oct 24, 2012 Revised: Oct 21, 2013, D. Lynch Description: This laboratory explores the characteristics of operational amplifiers in a simple voltage gain configuration as well

More information

Precalculations Individual Portion Introductory Lab: Basic Operation of Common Laboratory Instruments

Precalculations Individual Portion Introductory Lab: Basic Operation of Common Laboratory Instruments Name: Date of lab: Section number: M E 345. Lab 1 Precalculations Individual Portion Introductory Lab: Basic Operation of Common Laboratory Instruments Precalculations Score (for instructor or TA use only):

More information

University of Utah Electrical & Computer Engineering Department ECE 1250 Lab 4 Pulse Width Modulation Circuit

University of Utah Electrical & Computer Engineering Department ECE 1250 Lab 4 Pulse Width Modulation Circuit University of Utah Electrical & Computer Engineering Department ECE 1250 Lab 4 Pulse Width Modulation Circuit Note: Bring textbook & parts used last time to lab. A. Stolp, 1/8/12 rev, Objective Build a

More information

Analog Effect Pedals. EE333 Project 1. Francisco Alegria and Josh Rolles

Analog Effect Pedals. EE333 Project 1. Francisco Alegria and Josh Rolles Analog Effect Pedals EE333 Project 1 Francisco Alegria and Josh Rolles Introduction For the first project, we ve chosen to design two analog guitar effect pedals. This report will discuss the schematic

More information

Instructional Demos, In-Class Projects, & Hands-On Homework: Active Learning for Electrical Engineering using the Analog Discovery

Instructional Demos, In-Class Projects, & Hands-On Homework: Active Learning for Electrical Engineering using the Analog Discovery Instructional Demos, In-Class Projects, & Hands-On Homework: Active Learning for Electrical Engineering using the Analog Discovery by Dr. Gregory J. Mazzaro Dr. Ronald J. Hayne THE CITADEL, THE MILITARY

More information

ECE 4670 Spring 2014 Lab 1 Linear System Characteristics

ECE 4670 Spring 2014 Lab 1 Linear System Characteristics ECE 4670 Spring 2014 Lab 1 Linear System Characteristics 1 Linear System Characteristics The first part of this experiment will serve as an introduction to the use of the spectrum analyzer in making absolute

More information

Sensors Fundamentals. Renesas Electronics America Inc Renesas Electronics America Inc. All rights reserved.

Sensors Fundamentals. Renesas Electronics America Inc Renesas Electronics America Inc. All rights reserved. Sensors Fundamentals Renesas Electronics America Inc. Renesas Technology & Solution Portfolio 2 Agenda Introduction Sensors fundamentals ADI sensors Sensors data acquisition ADI support for sensors applications

More information

EE 233 Circuit Theory Lab 3: First-Order Filters

EE 233 Circuit Theory Lab 3: First-Order Filters EE 233 Circuit Theory Lab 3: First-Order Filters Table of Contents 1 Introduction... 1 2 Precautions... 1 3 Prelab Exercises... 2 3.1 Inverting Amplifier... 3 3.2 Non-Inverting Amplifier... 4 3.3 Integrating

More information

Quantity available (A) Quantity required (R) Sl. No. Deficiency (R - A) Description of Equipment

Quantity available (A) Quantity required (R) Sl. No. Deficiency (R - A) Description of Equipment . 2. 3. 4. 5. 6. (R 203) Semester II EE62 Electric Circuits Laboratory Regulated Power Supply: 0 5 V D.C Function Generator ( MHz) Single Phase Energy Meter Oscilloscope (20 MHz). Digital Storage Oscilloscope

More information

Multiple Instrument Station Module

Multiple Instrument Station Module Multiple Instrument Station Module Digital Storage Oscilloscope Vertical Channels Sampling rate Bandwidth Coupling Input impedance Vertical sensitivity Vertical resolution Max. input voltage Horizontal

More information

AC : LAB EXPERIENCE FOR CIRCUITS CLASSES IN A SIM- PLIFIED LAB ENVIRONMENT

AC : LAB EXPERIENCE FOR CIRCUITS CLASSES IN A SIM- PLIFIED LAB ENVIRONMENT AC 2011-250: LAB EXPERIENCE FOR CIRCUITS CLASSES IN A SIM- PLIFIED LAB ENVIRONMENT Claudio Talarico, Eastern Washington University Claudio Talarico is an Associate Professor of Electrical Engineering at

More information

ENGN Analogue Electronics Digital PC Oscilloscope

ENGN Analogue Electronics Digital PC Oscilloscope Faculty of Engineering and Information Technology Department of Engineering ENGN3227 - Analogue Electronics Digital PC Oscilloscope David Dries u2543318 Craig Gibbons u2543813 James Moran u4114563 Ranmadhu

More information

PHYSICS 330 LAB Operational Amplifier Frequency Response

PHYSICS 330 LAB Operational Amplifier Frequency Response PHYSICS 330 LAB Operational Amplifier Frequency Response Objectives: To measure and plot the frequency response of an operational amplifier circuit. History: Operational amplifiers are among the most widely

More information

Class #9: Experiment Diodes Part II: LEDs

Class #9: Experiment Diodes Part II: LEDs Class #9: Experiment Diodes Part II: LEDs Purpose: The objective of this experiment is to become familiar with the properties and uses of LEDs, particularly as a communication device. This is a continuation

More information

University of Michigan EECS 311: Electronic Circuits Fall 2009 LAB 2 NON IDEAL OPAMPS

University of Michigan EECS 311: Electronic Circuits Fall 2009 LAB 2 NON IDEAL OPAMPS University of Michigan EECS 311: Electronic Circuits Fall 2009 LAB 2 NON IDEAL OPAMPS Issued 10/5/2008 Pre Lab Completed 10/12/2008 Lab Due in Lecture 10/21/2008 Introduction In this lab you will characterize

More information

Audio Amplifier. November 27, 2017

Audio Amplifier. November 27, 2017 Audio Amplifier November 27, 2017 1 Pre-lab No pre-lab calculations. 2 Introduction In this lab, you will build an audio power amplifier capable of driving a 8 Ω speaker the way it was meant to be driven...

More information

ECE3204 D2015 Lab 1. See suggested breadboard configuration on following page!

ECE3204 D2015 Lab 1. See suggested breadboard configuration on following page! ECE3204 D2015 Lab 1 The Operational Amplifier: Inverting and Non-inverting Gain Configurations Gain-Bandwidth Product Relationship Frequency Response Limitation Transfer Function Measurement DC Errors

More information

R & D Electronics DIGITAL IC TRAINER. Model : DE-150. Feature: Object: Specification:

R & D Electronics DIGITAL IC TRAINER. Model : DE-150. Feature: Object: Specification: DIGITAL IC TRAINER Model : DE-150 Object: To Study the Operation of Digital Logic ICs TTL and CMOS. To Study the All Gates, Flip-Flops, Counters etc. To Study the both the basic and advance digital electronics

More information

EE 110 Introduction to Engineering & Laboratory Experience Saeid Rahimi, Ph.D. Lab 0: Course Introduction

EE 110 Introduction to Engineering & Laboratory Experience Saeid Rahimi, Ph.D. Lab 0: Course Introduction EE 110 Introduction to Engineering & Laboratory Experience Saeid Rahimi, Ph.D. Lab 0: Course Introduction The primary goal of the one-unit EE110 course is to serve as a small window to allow the freshman

More information

Real Analog - Circuits 1 Chapter 11: Lab Projects

Real Analog - Circuits 1 Chapter 11: Lab Projects .3.4: Signal Conditioning Audio Application eal Analog Circuits Chapter : Lab Projects Overview: When making timevarying measurements, the sensor being used often has at least a few undesirable characteristics.

More information

ITT Technical Institute. ET275 Electronic Communications Systems I Onsite Course SYLLABUS

ITT Technical Institute. ET275 Electronic Communications Systems I Onsite Course SYLLABUS ITT Technical Institute ET275 Electronic Communications Systems I Onsite Course SYLLABUS Credit hours: 4 Contact/Instructional hours: 50 (30 Theory Hours, 20 Lab Hours) Prerequisite(s) and/or Corequisite(s):

More information

Fig. 1. NI Elvis System

Fig. 1. NI Elvis System Lab 2: Introduction to I Elvis Environment. Objectives: The purpose of this laboratory is to provide an introduction to the NI Elvis design and prototyping environment. Basic operations provided by Elvis

More information

ET275P Electronic Communications Systems I [Onsite]

ET275P Electronic Communications Systems I [Onsite] ET275P Electronic Communications Systems I [Onsite] Course Description: In this course, several methods of signal transmission and reception are covered, including such techniques as mixing, modulating

More information

LABORATORY EXPERIMENT. Infrared Transmitter/Receiver

LABORATORY EXPERIMENT. Infrared Transmitter/Receiver LABORATORY EXPERIMENT Infrared Transmitter/Receiver (Note to Teaching Assistant: The week before this experiment is performed, place students into groups of two and assign each group a specific frequency

More information

LumiDax Electronics LLC Bakerboard Analog Trainer. Operator's Guide with Example Projects

LumiDax Electronics LLC Bakerboard Analog Trainer. Operator's Guide with Example Projects LumiDax Electronics LLC Bakerboard Analog Trainer Operator's Guide with Example Projects Written by Jonathan Baumgardner Copyright 2014 Introduction The LumiDax Bakerboard Analog Trainer is an all-in-one

More information

EXAMPLE. Use this jack for the red test lead when measuring. current from 0 to 200mA. Figure P-1

EXAMPLE. Use this jack for the red test lead when measuring. current from 0 to 200mA. Figure P-1 Digital Multimeters ON / OFF power switch Continuity / Diode Test Function Resistance Function Ranges from 200Ω to 200MΩ Transistor Test Function DC Current Function Ranges from 2mA to 20A. AC Current

More information

Parts to be supplied by the student: Breadboard and wires IRLZ34N N-channel enhancement-mode power MOSFET transistor

Parts to be supplied by the student: Breadboard and wires IRLZ34N N-channel enhancement-mode power MOSFET transistor University of Utah Electrical & Computer Engineering Department ECE 1250 Lab 3 Electronic Speed Control and Pulse Width Modulation A. Stolp, 12/31/12 Rev. Objectives 1 Introduce the Oscilloscope and learn

More information

Operational Amplifiers 2 Active Filters ReadMeFirst

Operational Amplifiers 2 Active Filters ReadMeFirst Operational Amplifiers 2 Active Filters ReadMeFirst Lab Summary In this lab you will build two active filters on a breadboard, using an op-amp, resistors, and capacitors, and take data for the magnitude

More information

Experiment A8 Electronics III Procedure

Experiment A8 Electronics III Procedure Experiment A8 Electronics III Procedure Deliverables: checked lab notebook, plots Overview Electronics have come a long way in the last century. Using modern fabrication techniques, engineers can now print

More information

6.111 Final Project Proposal HeartAware

6.111 Final Project Proposal HeartAware 6.111 Final Project Proposal HeartAware Michael Holachek and Nalini Singh Massachusetts Institute of Technology 1 Introduction Pulse oximetry is a popular non-invasive method for monitoring a person s

More information

Intro To Engineering II for ECE: Lab 7 The Op Amp Erin Webster and Dr. Jay Weitzen, c 2014 All rights reserved.

Intro To Engineering II for ECE: Lab 7 The Op Amp Erin Webster and Dr. Jay Weitzen, c 2014 All rights reserved. Lab 7: The Op Amp Laboratory Objectives: 1) To introduce the operational amplifier or Op Amp 2) To learn the non-inverting mode 3) To learn the inverting mode 4) To learn the differential mode Before You

More information

2. BAND-PASS NOISE MEASUREMENTS

2. BAND-PASS NOISE MEASUREMENTS 2. BAND-PASS NOISE MEASUREMENTS 2.1 Object The objectives of this experiment are to use the Dynamic Signal Analyzer or DSA to measure the spectral density of a noise signal, to design a second-order band-pass

More information

EE 320 L LABORATORY 9: MOSFET TRANSISTOR CHARACTERIZATIONS. by Ming Zhu UNIVERSITY OF NEVADA, LAS VEGAS 1. OBJECTIVE 2. COMPONENTS & EQUIPMENT

EE 320 L LABORATORY 9: MOSFET TRANSISTOR CHARACTERIZATIONS. by Ming Zhu UNIVERSITY OF NEVADA, LAS VEGAS 1. OBJECTIVE 2. COMPONENTS & EQUIPMENT EE 320 L ELECTRONICS I LABORATORY 9: MOSFET TRANSISTOR CHARACTERIZATIONS by Ming Zhu DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING UNIVERSITY OF NEVADA, LAS VEGAS 1. OBJECTIVE Get familiar with MOSFETs,

More information

Experiment A8 Electronics III Procedure

Experiment A8 Electronics III Procedure Experiment A8 Electronics III Procedure Deliverables: checked lab notebook, plots Overview Electronics have come a long way in the last century. Using modern fabrication techniques, engineers can now print

More information

Field Effect Transistors

Field Effect Transistors Field Effect Transistors Purpose In this experiment we introduce field effect transistors (FETs). We will measure the output characteristics of a FET, and then construct a common-source amplifier stage,

More information

ET 304A Laboratory Tutorial-Circuitmaker For Transient and Frequency Analysis

ET 304A Laboratory Tutorial-Circuitmaker For Transient and Frequency Analysis ET 304A Laboratory Tutorial-Circuitmaker For Transient and Frequency Analysis All circuit simulation packages that use the Pspice engine allow users to do complex analysis that were once impossible to

More information

Class #6: Experiment The 555-Timer & Pulse Width Modulation

Class #6: Experiment The 555-Timer & Pulse Width Modulation Class #6: Experiment The 555-Timer & Pulse Width Modulation Purpose: In this experiment we look at the 555-timer, a device that uses digital devices and other electronic switching elements to generate

More information

University of Jordan School of Engineering Electrical Engineering Department. EE 204 Electrical Engineering Lab

University of Jordan School of Engineering Electrical Engineering Department. EE 204 Electrical Engineering Lab University of Jordan School of Engineering Electrical Engineering Department EE 204 Electrical Engineering Lab EXPERIMENT 1 MEASUREMENT DEVICES Prepared by: Prof. Mohammed Hawa EXPERIMENT 1 MEASUREMENT

More information

ESE 150 Lab 04: The Discrete Fourier Transform (DFT)

ESE 150 Lab 04: The Discrete Fourier Transform (DFT) LAB 04 In this lab we will do the following: 1. Use Matlab to perform the Fourier Transform on sampled data in the time domain, converting it to the frequency domain 2. Add two sinewaves together of differing

More information

Lab 2: Discrete BJT Op-Amps (Part I)

Lab 2: Discrete BJT Op-Amps (Part I) Lab 2: Discrete BJT Op-Amps (Part I) This is a three-week laboratory. You are required to write only one lab report for all parts of this experiment. 1.0. INTRODUCTION In this lab, we will introduce and

More information

IT.MLD900 SENSORS AND TRANSDUCERS TRAINER. Signal Conditioning

IT.MLD900 SENSORS AND TRANSDUCERS TRAINER. Signal Conditioning SENSORS AND TRANSDUCERS TRAINER IT.MLD900 The s and Instrumentation Trainer introduces students to input sensors, output actuators, signal conditioning circuits, and display devices through a wide range

More information

Basic operational amplifier circuits In this lab exercise, we look at a variety of op-amp circuits. Note that this is a two-period lab.

Basic operational amplifier circuits In this lab exercise, we look at a variety of op-amp circuits. Note that this is a two-period lab. Basic operational amplifier circuits In this lab exercise, we look at a variety of op-amp circuits. Note that this is a two-period lab. Prior to Lab 1. If it has been awhile since you last used the lab

More information

LABORATORIES-ECE. Microprocessor & Microcontroller Lab - Srinivasa Ramanujan Lab

LABORATORIES-ECE. Microprocessor & Microcontroller Lab - Srinivasa Ramanujan Lab LABORATORIES-ECE Microprocessor & Microcontroller Lab - Srinivasa Ramanujan Lab Students are given extensive training in 16 bit microprocessors and micro controllers in this laboratory. Individual attention

More information

Lab 12: Timing sequencer (Version 1.3)

Lab 12: Timing sequencer (Version 1.3) Lab 12: Timing sequencer (Version 1.3) WARNING: Use electrical test equipment with care! Always double-check connections before applying power. Look for short circuits, which can quickly destroy expensive

More information

1.0 Introduction to VirtualBench

1.0 Introduction to VirtualBench Table of Contents 1.0 Introduction to VirtualBench... 3 1. 1 VirtualBench in the Laboratory... 3 1.2 VirtualBench Specifications... 4 1.3 Introduction to VirtualBench Getting Started Guide Lab Exercises...

More information

University of Utah Electrical Engineering Department ECE 2100 Experiment No. 2 Linear Operational Amplifier Circuits II

University of Utah Electrical Engineering Department ECE 2100 Experiment No. 2 Linear Operational Amplifier Circuits II University of Utah Electrical Engineering Department ECE 2100 Experiment No. 2 Linear Operational Amplifier Circuits II Minimum required points = 51 Grade base, 100% = 85 points Recommend parts should

More information

ALX-SSB 5 Band Filter Assembly Manual 19 November 2018

ALX-SSB 5 Band Filter Assembly Manual 19 November 2018 ALX-SSB 5 Band Filter Assembly Manual 19 November 2018 Contents Theory of Operation:... 1 Figure 1... 2 Parts Included:... 4 Board Overview:... 5 Figure 2... 5 Figure 3... 5 Board Assembly:... 6 Cable

More information

TV Remote. Discover Engineering. Youth Handouts

TV Remote. Discover Engineering. Youth Handouts Discover Engineering Youth Handouts Electronic Component Guide Component Symbol Notes Amplifier chip 1 8 2 7 3 6 4 5 Capacitor LED The amplifier chip (labeled LM 386) has 8 legs, or pins. Each pin connects

More information

Lab 6: Instrumentation Amplifier

Lab 6: Instrumentation Amplifier Lab 6: Instrumentation Amplifier INTRODUCTION: A fundamental building block for electrical measurements of biological signals is an instrumentation amplifier. In this lab, you will explore the operation

More information

An Introductory Guide to Circuit Simulation using NI Multisim 12

An Introductory Guide to Circuit Simulation using NI Multisim 12 School of Engineering and Technology An Introductory Guide to Circuit Simulation using NI Multisim 12 This booklet belongs to: This document provides a brief overview and introductory tutorial for circuit

More information

OPERATIONAL AMPLIFIERS (OP-AMPS) II

OPERATIONAL AMPLIFIERS (OP-AMPS) II OPERATIONAL AMPLIFIERS (OP-AMPS) II LAB 5 INTRO: INTRODUCTION TO INVERTING AMPLIFIERS AND OTHER OP-AMP CIRCUITS GOALS In this lab, you will characterize the gain and frequency dependence of inverting op-amp

More information

Analog Arts SL987 SL957 SL937 SL917 Product Specifications [1]

Analog Arts SL987 SL957 SL937 SL917 Product Specifications [1] www.analogarts.com Analog Arts SL987 SL957 SL937 SL917 Product Specifications [1] 1. These models include: an oscilloscope, a spectrum analyzer, a data recorder, a frequency & phase meter, an arbitrary

More information

Deficiency (R - A) Sl. No. (A) (R) 7. Pspice / Matlab /other Equivalent software Package) with PC Single Phase Wattmeter

Deficiency (R - A) Sl. No. (A) (R) 7. Pspice / Matlab /other Equivalent software Package) with PC Single Phase Wattmeter (R 03) Semester II EE6 Electric Circuits Laboratory.. 3. 4. 5. 6. Regulated Power Supply: 0 5 V D.C Function Generator ( MHz) Single Phase Energy Meter Oscilloscope (0 MHz). Digital Storage Oscilloscope

More information

CHAPTER 7 HARDWARE IMPLEMENTATION

CHAPTER 7 HARDWARE IMPLEMENTATION 168 CHAPTER 7 HARDWARE IMPLEMENTATION 7.1 OVERVIEW In the previous chapters discussed about the design and simulation of Discrete controller for ZVS Buck, Interleaved Boost, Buck-Boost, Double Frequency

More information

ELEG 205 Analog Circuits Laboratory Manual Fall 2016

ELEG 205 Analog Circuits Laboratory Manual Fall 2016 ELEG 205 Analog Circuits Laboratory Manual Fall 2016 University of Delaware Dr. Mark Mirotznik Kaleb Burd Patrick Nicholson Aric Lu Kaeini Ekong 1 Table of Contents Lab 1: Intro 3 Lab 2: Resistive Circuits

More information

University of Utah Electrical & Computer Engineering Department ECE 2210/2200 Lab 4 Oscilloscope

University of Utah Electrical & Computer Engineering Department ECE 2210/2200 Lab 4 Oscilloscope University of Utah Electrical & Computer Engineering Department ECE 2210/2200 Lab 4 Oscilloscope Objectives 1 Introduce the Oscilloscope and learn some uses. 2 Observe Audio signals. 3 Introduce the Signal

More information

Direct Current Waveforms

Direct Current Waveforms Cornerstone Electronics Technology and Robotics I Week 20 DC and AC Administration: o Prayer o Turn in quiz Direct Current (dc): o Direct current moves in only one direction in a circuit. o Though dc must

More information

PMOS Digital Testing at Rochester Institute of Technology

PMOS Digital Testing at Rochester Institute of Technology 1 PMOS Digital Testing at Rochester Institute of Technology Dr. Lynn Fuller, Adam Wardas webpage: http://www.rit.edu/lffeee Microelectronic Engineering Rochester Institute of Technology 82 Lomb Memorial

More information

A Super trainer with advanced hardware and software features only found in very expensive equipment.

A Super trainer with advanced hardware and software features only found in very expensive equipment. PLC Trainer PTS T100 LAB EXPERIMENTS A Super trainer with advanced hardware and software features only found in very expensive equipment. You won t find any similar equipment among our competitors at such

More information

Laboratory Exercise 6 THE OSCILLOSCOPE

Laboratory Exercise 6 THE OSCILLOSCOPE Introduction Laboratory Exercise 6 THE OSCILLOSCOPE The aim of this exercise is to introduce you to the oscilloscope (often just called a scope), the most versatile and ubiquitous laboratory measuring

More information

EK307 Passive Filters and Steady State Frequency Response

EK307 Passive Filters and Steady State Frequency Response EK307 Passive Filters and Steady State Frequency Response Laboratory Goal: To explore the properties of passive signal-processing filters Learning Objectives: Passive filters, Frequency domain, Bode plots

More information

Analog Arts SF990 SF880 SF830 Product Specifications

Analog Arts SF990 SF880 SF830 Product Specifications 1 www.analogarts.com Analog Arts SF990 SF880 SF830 Product Specifications Analog Arts reserves the right to change, modify, add or delete portions of any one of its specifications at any time, without

More information

Real Analog - Circuits 1 Chapter 1: Lab Projects

Real Analog - Circuits 1 Chapter 1: Lab Projects Real Analog - Circuits 1 Chapter 1: Lab Projects 1.2.2: Dependent Sources and MOSFETs Overview: In this lab assignment, a qualitative discussion of dependent sources is presented in the context of MOSFETs

More information

Department of Electronics & Communication Engineering LAB MANUAL SUBJECT: DIGITAL COMMUNICATION LABORATORY [ECE324] (Branch: ECE)

Department of Electronics & Communication Engineering LAB MANUAL SUBJECT: DIGITAL COMMUNICATION LABORATORY [ECE324] (Branch: ECE) Department of Electronics & Communication Engineering LAB MANUAL SUBJECT: DIGITAL COMMUNICATION LABORATORY [ECE324] B.Tech Year 3 rd, Semester - 5 th (Branch: ECE) Version: 01 st August 2018 The LNM Institute

More information

LABORATORIES-ECE. Sir Srinivasa Ramanujan - Microprocessor & Microcontroller Laboratory

LABORATORIES-ECE. Sir Srinivasa Ramanujan - Microprocessor & Microcontroller Laboratory LABORATORIES-ECE Sir Srinivasa Ramanujan - Microprocessor & Microcontroller Laboratory Students are given extensive training in 16 bit microprocessors and micro controllers in this laboratory. Individual

More information

Figure 1.1 Mechatronic system components (p. 3)

Figure 1.1 Mechatronic system components (p. 3) Figure 1.1 Mechatronic system components (p. 3) Example 1.2 Measurement System Digital Thermometer (p. 5) Figure 2.2 Electric circuit terminology (p. 13) Table 2.2 Resistor color band codes (p. 18) Figure

More information

Conventional transistor overview and special transistors

Conventional transistor overview and special transistors Conventional transistor overview and special transistors This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit

More information

Pre-Lab. Introduction

Pre-Lab. Introduction Pre-Lab Read through this entire lab. Perform all of your calculations (calculated values) prior to making the required circuit measurements. You may need to measure circuit component values to obtain

More information

Miniproject: AM Radio

Miniproject: AM Radio Objective UNIVERSITY OF CALIFORNIA AT BERKELEY College of Engineering Department of Electrical Engineering and Computer Sciences EE05 Lab Experiments Miniproject: AM Radio Until now, the labs have focused

More information

DC->DC Power Converters

DC->DC Power Converters DC->DC Power Converters Parts List: 1 dual DC power supply 1 Function generator 1 Oscilloscope, 1 hand held multi-meter 1 PNP BJT power transistor (TIP32) 1 power diode (HFA15TB60) 1 100F electrolytic

More information

MINUTES OF PRE BID MEETING

MINUTES OF PRE BID MEETING MINUTES OF PRE BID MEETING Tender for Supply, Delivery, Installation & Commissioning of Equipment for Department of Engineering Technology, Faculty of Technological Studies Tender No : UWU/AHEAD/18/TS/ET/02

More information

M328 version ESR inductance capacitance meter multifunctional tester DIY

M328 version ESR inductance capacitance meter multifunctional tester DIY M328 version ESR inductance capacitance meter multifunctional tester DIY About transistor Multifunction Tester: The tester uses 3.7V rechargeable lithium battery (battery model: 14500) powered portable

More information

LBI-38392C IC DATA MAINTENANCE MANUAL LOGIC BOARD U707 OCTAL DATA LATCH 19D902172G1 & G2 TABLE OF CONTENTS

LBI-38392C IC DATA MAINTENANCE MANUAL LOGIC BOARD U707 OCTAL DATA LATCH 19D902172G1 & G2 TABLE OF CONTENTS LBI-38392C MAINTENANCE MANUAL LOGIC BOARD 19D902172G1 & G2 U707 OCTAL DATA LATCH IC DATA TABLE OF CONTENTS Page DESCRIPTION........................................... Front.. Cover CIRCUIT ANALYSIS........................................

More information

Curriculum. Technology Education ELECTRONICS

Curriculum. Technology Education ELECTRONICS Curriculum Technology Education ELECTRONICS Supports Academic Learning Expectation # 3 Students and graduates of Ledyard High School will employ problem-solving skills effectively Approved by Instructional

More information

Common-Source Amplifiers

Common-Source Amplifiers Lab 2: Common-Source Amplifiers Introduction The common-source stage is the most basic amplifier stage encountered in CMOS analog circuits. Because of its very high input impedance, moderate-to-high gain,

More information

Filters And Waveform Shaping

Filters And Waveform Shaping Physics 3330 Experiment #3 Fall 2001 Purpose Filters And Waveform Shaping The aim of this experiment is to study the frequency filtering properties of passive (R, C, and L) circuits for sine waves, and

More information

University of Pittsburgh

University of Pittsburgh University of Pittsburgh Experiment #7 Lab Report Analog-Digital Applications Submission Date: 08/01/2018 Instructors: Dr. Ahmed Dallal Shangqian Gao Submitted By: Nick Haver & Alex Williams Station #2

More information

Physics 120 Lab 6 (2018) - Field Effect Transistors: Ohmic Region

Physics 120 Lab 6 (2018) - Field Effect Transistors: Ohmic Region Physics 120 Lab 6 (2018) - Field Effect Transistors: Ohmic Region The field effect transistor (FET) is a three-terminal device can be used in two extreme ways as an active element in a circuit. One is

More information

Electronics Design Laboratory Lecture #1, Fall 2014

Electronics Design Laboratory Lecture #1, Fall 2014 Electronics Design Laboratory Lecture #1, Fall 2014 Dr. Daniel Seltzer Teaching Assistants: Fenglong Lu & Ali Sepahvand Electronics Design Laboratory 1 Daniel Seltzer seltzer@colorado.edu Fenglong Lu Fenglong.Lu@colorado.edu

More information

Getting started with Mobile Studio.

Getting started with Mobile Studio. Getting started with Mobile Studio. IMPORTANT!!! DO NOT PLUG THE MOBILE STUDIO BOARD INTO THE USB PORT YET. First Lab: For the first lab experiment you will essentially play with the Mobile Studio Board

More information

Magnetic Levitation System

Magnetic Levitation System Magnetic Levitation System Electromagnet Infrared LED Phototransistor Levitated Ball Magnetic Levitation System K. Craig 1 Magnetic Levitation System Electromagnet Emitter Infrared LED i Detector Phototransistor

More information

4.2.2 Metal Oxide Semiconductor Field Effect Transistor (MOSFET)

4.2.2 Metal Oxide Semiconductor Field Effect Transistor (MOSFET) 4.2.2 Metal Oxide Semiconductor Field Effect Transistor (MOSFET) The Metal Oxide Semitonductor Field Effect Transistor (MOSFET) has two modes of operation, the depletion mode, and the enhancement mode.

More information

Operational Amplifiers

Operational Amplifiers Operational Amplifiers November 23, 2017 1 Pre-lab Calculations 1) Calculate the gain for all four circuits in Fig. 3. 2 Introduction Operational Amplifiers? They should call them fun amplifiers. Because,

More information

UNIVERSITY OF UTAH ELECTRICAL AND COMPUTER ENGINEERING DEPARTMENT ELECTROMYOGRAM (EMG) DETECTOR WITH AUDIOVISUAL OUTPUT

UNIVERSITY OF UTAH ELECTRICAL AND COMPUTER ENGINEERING DEPARTMENT ELECTROMYOGRAM (EMG) DETECTOR WITH AUDIOVISUAL OUTPUT UNIVESITY OF UTAH ELECTICAL AND COMPUTE ENGINEEING DEPATMENT ECE 3110 LABOATOY EXPEIMENT NO. 5 ELECTOMYOGAM (EMG) DETECTO WITH AUDIOVISUAL OUTPUT Pre-Lab Assignment: ead and review Sections 2.4, 2.8.2,

More information

GCSE Electronics. Scheme of Work

GCSE Electronics. Scheme of Work GCSE Electronics Scheme of Work Week Topic Detail Notes 1 Practical skills assemble a circuit using a diagram recognize a component from its physical appearance (This is a confidence building/motivating

More information

Op Amp Booster Designs

Op Amp Booster Designs Op Amp Booster Designs Although modern integrated circuit operational amplifiers ease linear circuit design, IC processing limits amplifier output power. Many applications, however, require substantially

More information

Lab 3: AC Low pass filters (version 1.3)

Lab 3: AC Low pass filters (version 1.3) Lab 3: AC Low pass filters (version 1.3) WARNING: Use electrical test equipment with care! Always double-check connections before applying power. Look for short circuits, which can quickly destroy expensive

More information

Computer based experiments for off-campus teaching and learning of AC electricity

Computer based experiments for off-campus teaching and learning of AC electricity Computer based experiments for off-campus teaching and learning of AC electricity Graham Wild, Geoff Swan, and Steven Hinckley Edith Cowan University, Joondalup, Australia G.Wild@ecu.edu.au G.Swan@ecu.edu.au

More information

CRN: MET-487 Instrumentation and Automatic Control June 28, 2010 August 5, 2010 Professor Paul Lin

CRN: MET-487 Instrumentation and Automatic Control June 28, 2010 August 5, 2010 Professor Paul Lin CRN: 32030 MET-487 Instrumentation and Automatic Control June 28, 2010 August 5, 2010 Professor Paul Lin Course Description: Class 2, Lab 2, Cr. 3, Junior class standing and 216 Instrumentation for pressure,

More information

CENG4480 Embedded System Development and Applications The Chinese University of Hong Kong Laboratory 1: Op Amp (I)

CENG4480 Embedded System Development and Applications The Chinese University of Hong Kong Laboratory 1: Op Amp (I) CENG4480 Embedded System Development and Applications The Chinese University of Hong Kong Laboratory 1: Op Amp (I) Student ID: 2018 Fall 1 Introduction This lab session introduces some very basic concepts

More information

USER MANUAL FOR THE LM2901 QUAD VOLTAGE COMPARATOR FUNCTIONAL MODULE

USER MANUAL FOR THE LM2901 QUAD VOLTAGE COMPARATOR FUNCTIONAL MODULE USER MANUAL FOR THE LM2901 QUAD VOLTAGE COMPARATOR FUNCTIONAL MODULE LM2901 Quad Voltage Comparator 1 5/18/04 TABLE OF CONTENTS 1. Index of Figures....3 2. Index of Tables. 3 3. Introduction.. 4-5 4. Theory

More information

EE-4022 Experiment 2 Amplitude Modulation (AM)

EE-4022 Experiment 2 Amplitude Modulation (AM) EE-4022 MILWAUKEE SCHOOL OF ENGINEERING 2015 Page 2-1 Student objectives: EE-4022 Experiment 2 Amplitude Modulation (AM) In this experiment the student will use laboratory modules to implement operations

More information

An Electronic Variable Load by Dave Chute, KG4BZW

An Electronic Variable Load by Dave Chute, KG4BZW EDITOR: GEOFF HAINES, N1GY Published Quarterly N1GY@ARRL.NET Summer Edition FROM THE EDITOR: Once again I am happy to report that we have several great articles in the Summer Edition of The WCF Experimenter.

More information

ECE 310L : LAB 9. Fall 2012 (Hay)

ECE 310L : LAB 9. Fall 2012 (Hay) ECE 310L : LAB 9 PRELAB ASSIGNMENT: Read the lab assignment in its entirety. 1. For the circuit shown in Figure 3, compute a value for R1 that will result in a 1N5230B zener diode current of approximately

More information

On-Line Students Analog Discovery 2: Arbitrary Waveform Generator (AWG). Two channel oscilloscope

On-Line Students Analog Discovery 2: Arbitrary Waveform Generator (AWG). Two channel oscilloscope EET 150 Introduction to EET Lab Activity 5 Oscilloscope Introduction Required Parts, Software and Equipment Parts Figure 1, Figure 2, Figure 3 Component /Value Quantity Resistor 10 kω, ¼ Watt, 5% Tolerance

More information

Curve Tracer Laboratory Assistant Using the Analog Discovery Module as A Curve Tracer

Curve Tracer Laboratory Assistant Using the Analog Discovery Module as A Curve Tracer Curve Tracer Laboratory Assistant Using the Analog Discovery Module as A Curve Tracer The objective of this lab is to become familiar with methods to measure the dc current-voltage (IV) behavior of diodes

More information

University of North Carolina-Charlotte Department of Electrical and Computer Engineering ECGR 3157 Electrical Engineering Design II Fall 2013

University of North Carolina-Charlotte Department of Electrical and Computer Engineering ECGR 3157 Electrical Engineering Design II Fall 2013 Exercise 1: PWM Modulator University of North Carolina-Charlotte Department of Electrical and Computer Engineering ECGR 3157 Electrical Engineering Design II Fall 2013 Lab 3: Power-System Components and

More information