TYPICAL APPLICATIONS DRIVERS AMPLIFIERS

Transcription

1 The HVA series of DC-to-DC high voltage power supplies operates a precision filter/divider and linear HV switch to produce a high voltage amplifier (HVA). These modules provide a high-resolution, programmable, high voltage DC to full scale waveform capability greater than khz output. This is optimized for bias applications while providing excellent line regulation, load regulation, dynamic response, and stability. It can both source and sink current. DC, reversible, and amplifier modes Fast slew rate (40 V/μs) and high bandwidth Can both source and sink current Bipolar models available at 0 to 5 kv Unipolar models available at 0 to 0 kv PPM level line and load regulation 50 ppm temperature coefficient (5 ppm optional) Available reduced ripple option Differential precision 0 to 0 VDC control input Precision output voltage and current monitors UL/cUL recognized component; CE Mark (LVD and RoHS) TYPICAL APPLICATIONS DRIVERS PZT ACTUATORS MEMS DEVICES ELECTROACTIVE POLYMERS ELECTRORHEOLOGICAL MATERIALS ELECTROHYDRODYNAMICS ELECTROSTATIC CHUCK POCKELS CELLS LASER & ELECTRO-OPTIC MODULATION ELECTROPHORESIS AMPLIFIERS BEAM DEVICES SUCH AS MASS SPECTROMETERS AND ELECTRON MICROSCOPES AS ELECTROSTATIC DEFLECTION/FOCUSING, FLOCKING, COATING, ELECTROSPINNING, PRECIPITATION, AND ELECTROCOALESCENCE

2 PARAMETER CONDITIONS MODELS UNITS Range Full Power 4 VDC ± 0% VDC Current Standby/Disable < 70 unipolar, < 05 bipolar ma Current Full Load, Max Eout < 40 ma Current No Load, Max Eout < 400 ma Output* kv/± kv kv/± kv 4 kv/±4 kv ±5 kv 6 kv 0 kv Power Nominal, Max Eout W Current Iout Entire Range µa Ripple Full Load, Max Eout %V pp Ripple with -F Option Monitor Current Monitor Line Regulation Load Regulation Programming and Controls Impedance Adjust Full Load, Max Eout %V pp Normal Operating Conditions 0 to 0 ±0.5% VDC Normal Operating Conditions 0 to 0 ±% VDC Vin Min to Vin Max, Max Eout < 0.0 % No Load to Full Load, Max Eout < 0.0 % Normal Operating Conditions 0 MΩ Differential 0 to +0 VDC HV ON/OFF (Enable/Disable) 0 to +0.8 V disable, +.5 to +0 enable (default = disable) VDC Reference Max Source Current Environmental Operating Temperature Coefficient Thermal Shock T = +5 C, Initial Value ±0.05% VDC T = +5 C 5 ma Full Load, Max Eout, Case Temp. Over the Specified Temperature +0 to +45 C 50 PPM or 5 PPM PPM/ C Mil-Std 80, Method to +65 C Storage Non-Operating, Case Temp. -40 to +00 C Humidity Altitude All Conditions, Standard Package Standard Package, All Conditions Shock Mil-Std-80, Method 56, Proc. 4 Vibration Mil-Std-80, Method 54, Fig to 95%, non-condensing - Sea level through 0,000 0 Gs 0 Gs *Units listed without polarity can be ordered as positive (+) or negative (-). Units listed as (±) are bipolar. Contact AE for preset fixed outputs or other requirements. ft

3 SAMPLE HVA SERIES WAVEFORMS CHAN : 0 V PER DIVI Figure A. 5HVA4-BP sine wave input CHAN : 0 V PER DIVI TIME BASE: 00 µsec Figure B. 5HVA4-BP 0 kv step wave input with no load CHAN : 0 V PER DIVI Figure C: 5HVA4-BP triangle wave input CHAN : 0 V PER DIVI Figure D. 5HVA4-BP square wave input HVA4-BP (BIPOLAR) BANDWIDTH (Hz) HVA4-BP (BIPOLAR) 0HVA4-P (UNIPOLAR) BANDWIDTH (Hz) HVA4-P (UNIPOLAR) SIGNAL AMPLITUDE (kv p-p) Figure E. Bandwidth vs. signal amplitude with no load SIGNAL AMPLITUDE (kv p-p) Figure F. Bandwidth vs. signal amplitude with 00 pf load

4 PHYSICAL SPECIFICATIONS Construction Aluminum alloy 505-H3 Anodize MIL-A-865E blue Size Volume cc (8.58 in³) Weight 0.68 kg (.5 lb) Connections Sub-miniature D 5-pin, female HV Connector LGH/L HV Return #6-3 x long threaded post

5 UV-HVA INPUT CONNECTOR PINOUT FUNCTIONS pin DESCRIPTION function Reference V precision reference Programming - 0 to +0 V or 0 to -0 V to program full output voltage, depending on polarity. Programming input is differential between pins and 3. 3 Programming + 4 Monitor 0 to ±0 V represents 0 to ± full output voltage 5 N/C No connection 6 Signal Ground Reference all control signals here. 7 Power +4 V input power 8 Power 9 Power Ground power return 0 Power Ground Enable TTL high to enable, low to disable, default is OFF Current Monitor 0 to ±0 V represents 0 to ± full output current 3 Current Limit Adjust 0 to +0 V sets current limit from 0 to full rated output current 4 N/C No connection 5 Signal Ground Reference all control signals here. ORDERING INFORMATION Type 0 to 000 VDC Output HVA 0 to 000 VDC Output HVA 0 to 4000 VDC Output 4HVA 0 to 5000 VDC Output (Bipolar Only) 5HVA 0 to 6000 VDC Output (Unipolar Only) 6HVA 0 to 0000 VDC Output (Unipolar Only) 0HVA 4 VDC Nominal 4 Polarity Positive Output -P Negative Output -N Bipolar Output Power W Output Option Ripple Stripper Output Filter -F 5 PPM Temperature Coefficient -5PPM Connections LGH Standard 5 kv SHV Type -SHV-5kV 0 kv, BNC Type -BNC-0kV Popular accessories ordered with this product include our full range of high voltage output connectors. (See Accessories and Connectors datasheet.). -BP Non-RoHS compliant units are available. Please contact the factory for more information. Type Example: HVA4-PF Model Option Power Polarity