2017 Advanced Energy Industries, Inc. HITEK POWER MH60 SERIES VERSATILE HIGH-VOLTAGE POWER SUPPLY MODULES
|
|
|
- Janis Perry
- 6 years ago
- Views:
Transcription
1 2017 Advanced Energy Industries, Inc. HITEK POWER MH60 SERIES VERSATILE HIGH-VOLTAGE POWER SUPPLY MODULES
2 Full range control and monitoring of output voltage and current for OEM equipment Page 2
3 The MH60 series is a range of versatile high voltage power supply modules suitable for specification in OEM equipment. Powered from 24 VDC, they supply up to 60 W output and allow full range control and monitoring of output voltage and current. Custom versions can be produced for specific requirements. Features Typical Applications 60 W output power High reliability 24 VDC powered Range of outputs available Positive or negative polarity Short circuit and flashover protection Remotely controllable V and I control V and I monitor LED status indication Low ripple EU RoHS compliant to 2002/95/EC marked for EU LV Directive 73/23/EEC Wide angle, high definition CRTs X-ray equipment Insulation and materials testing Projection Page 3
4 SPECIFICATIONS Output Power Output Voltage Output Current 60 W max 0 to 50 kv depending on model 0 to 2 ma depending on model Input Voltage +24 VDC (±10%) Input Current Polarity Ripple Voltage Regulation Current Regulation Voltage Control Current Control Monitors Temperature Coefficent Stability Operating Temperature Storage Temperature Humidity Altitude Installation Category Pollution Degree Control Cooling Protection EMC Safety RoHS Mechanical Specification Dimensions Weight Casing 4 A max Positive or negative to order < 0.05% +10 V peak to peak Line: < 0.01% for a 10% change in input voltage Load: < 0.01% ±1 V no load to full load Line: < 0.01% for a 10% change in input voltage Load: < 0.01% ±1 μa for a 50% voltage change 0 to 10 V for 0 to 50 kv accuracy 0.25% ±10 V 0 to 10 V for 0 to 1.2 ma accuracy 0.25% ±1 μa Voltage: 0 to 10 V ±0.25% ±5 mv for 0 to 50 kv Current: 0 to 10 V ±0.25% ±5 mv for 0 to 1.2 ma Each monitor has a series output resistor of 1 kω 100 ppm/ C over operating temperature range Applies to voltage control, voltage monitor and current monitor ±0.1% over an 8 h period after 30 min warmup 0 to +45 C -20 C to +60 C 85% max relative humidity non-condensing Sea level to 2000 m (6500') 1 (BS EN ) 2 (BS EN ) The power supply is operated via the 9-way, D-type connector situated on the rear panel. Full control and monitoring functions are available by this method. Free convection (no fan) The units are fully protected against flashover and continuous short circuit (no trip). The MH60 series is intended for installation as a component of a system. Basic EMC filtering is provided. The MH60 series meets the requirements of the Low Voltage Directive (LVD), 2006/95/EC, by complying with BS EN61010 when it is installed as a component part of compliant equipment. It is CE marked accordingly. The MH60 series meets the requirements of EU Directive 2002/95/EC on the Restriction of use of certain Hazardous Substances in electrical and electronic equipment (RoHS). See outline drawing 3 kg (6.6 lb) Aluminium, clear non-chrome passivate finish Page 4
5 INTERFACE CONNECTIONS Input DC Safety Earth HV Output Control interface via a 9-way, female D-type connector: 2 x ¼ space terminals M5 stud 50 kv unit has poke home connector SIGNAL GROUND 0 V 1 6 CURRENT MONITOR HV ON/OFF 2 7 INTERLOCK INPUT VOLTAGE PROGRAM 3 8 INTERLOCK MONITOR VOLTAGE MONITOR V REFERENCE CURRENT PROGRAM 5 OUTPUTS AND ORDERING INFORMATION Model Output Voltage Output Current MH60/303* 30 kv 2 ma MH60/403* 40 kv 1.5 ma MH60/503* 50 kv 1.2 ma Accessories MH60 1M HV Cable MH60 3M HV Cable MH60 3M HV Cable * Add P for a Positive polarity unit or N for a Negative polarity unit. eg: part number for a 50 kv positive unit: MH60/503P For voltages not listed above, please contact our sales team. These component power supplies meet the requirements of EC Directive 73/23/EEC (LVD). Page 5
6 Page 6 Drawing dimensions are in mm (inches).
7 Page 7
8 For international contact information, visit advanced-energy.com. ENG-HV-MH Specifications are subject to change without notice Advanced Energy Industries, Inc. All rights reserved. Advanced Energy, AE, and HiTek Power are U.S. trademarks of Advanced Energy Industries, Inc.
2017 Advanced Energy Industries, Inc. HITEK POWER MV2000 SERIES MEDIUM-VOLTAGE HIGH-CURRENT POWER SUPPLIES
2017 Advanced Energy Industries, Inc. HITEK POWER MV2000 SERIES MEDIUM-VOLTAGE HIGH-CURRENT POWER SUPPLIES Medium-voltage rack-mount power supplies Page 2 The MV2000 series high-performance, medium output
HITEK POWER XR KW X-RAY POWER SUPPLY MODULE
HITEK POWER XR1000 1 KW X-RAY POWER SUPPLY MODULE Component power supply for industrial x-ray systems, elemental analysis equipment, x-ray diffraction spectrometers, and materials process monitoring applications
HITEK POWER XR KW X-RAY POWER SUPPLY MODULE
HITEK POWER XR1000 1 KW X-RAY POWER SUPPLY MODULE The HiTek Power XR1000 series is a component power supply for industrial x-ray systems, elemental analysis equipment, x-ray diffraction spectrometers,
HITEK POWER OL1K SERIES
HIGH VOLTAGE POWER SUPPLY The HiTek Power OL1K Series range of single output high voltage power supplies meets the exacting requirements found in electron and ion beam systems, ion implantation and X-ray
HITEK POWER OLS10K SERIES
10 KW HIGH VOLTAGE POWER SUPPLIES The HiTek Power OLS10K series range of single-output high voltage power supplies meets the exacting requirements found in electron-beam, ion-beam, and x-ray systems, as
HITEK POWER EG353 SERIES HIGH-STABILITY 35 KV HIGH VOLTAGE POWER SUPPLIES FOR PRECISION SEM E-BEAM APPLICATIONS
HITEK POWER EG353 SERIES HIGH-STABILITY 35 KV HIGH VOLTAGE POWER SUPPLIES FOR PRECISION SEM E-BEAM APPLICATIONS High-stability 35 kv high voltage power supplies for precision SEM e-beam applications The
HITEK POWER OL600W SERIES
600 W HIGH VOLTAGE POWER SUPPLIES The HiTek Power OL600W series range of single output high voltage power supplies meets the exacting requirements found in electron beam, ion beam, and x-ray systems, as
HITEK POWER OL3000 SERIES
3KW HIGH VOLTAGE POWER SUPPLY The HiTek Power OL3000 series range of single output high voltage power supplies was designed as a component power supply for use in a wide range of diverse applications;
HITEK POWER PSM10 SERIES
HITEK POWER PSM10 SERIES PRECISION SCIENTIFIC POWER SUPPLY MODULES The HiTek Power PSM10 series is a range of versatile high voltage component power supply modules equally suited to both laboratory and
HITEK POWER OLS10KD SERIES
10KW HIGH VOLTAGE POWER SUPPLY The HiTek Power OLS10KD series range of high voltage power supplies recognises the requirement for high stability and very low ripple over a wide range of output voltages.
HITEK POWER IP100 SERIES
ION PUMP POWER SUPPLY The HiTek Power IP100 Series is a range of high voltage power supplies designed to drive a vacuum chamber ion pump where a vacuum in the region of 1x10E-11 Torr is required. The IP100
HITEK POWER MSP SERIES MASS SPECTROMETRY POWER SUPPLY MODULES
HITEK POWER MSP SERIES MASS SPECTROMETRY POWER SUPPLY MODULES The MSP series consists of high stability, unipolar source modules that perform reliably even under short-circuit or arc conditions. They are
HITEK POWER OLH10K SERIES
10KW HIGH VOLTAGE POWER SUPPLIES The HiTek Power OLH10K Series is a range of high reliability single output high voltage power supplies designed to meet the rigorous requirements of ion and electron beam
HITEK POWER MSRD SERIES MASS SPECTROMETRY POWER SUPPLY MODULES
HITEK POWER MSRD SERIES MASS SPECTROMETRY POWER SUPPLY MODULES MSRD SERIES The MSRD series consists of high-stability, reversible source modules that perform reliably even under short-circuit or arc conditions.
HITEK POWER MSRZ SERIES MASS SPECTROMETRY POWER SUPPLY MODULES
HITEK POWER MSRZ SERIES MASS SPECTROMETRY POWER SUPPLY MODULES MSRZ SERIES MSRZ series reversible source modules provide a fast reversible output voltage with high stability, low ripple, and excellent
Series OLS10KD 10kW HIGH VOLTAGE POWER SUPPLY
DESCRIPTION The Series OLS10KD range of high voltage power supplies recognises the requirement for high stability and very low ripple over a wide range of output voltages. This is achieved by combining
Series OLH10KD 10kW HIGH VOLTAGE POWER SUPPLIES
Series OLH10KD FEATURES 10kW of output power Wide dynamic range with dual supply configuration Output voltages from 60kV to 500kV for high range Output voltages from 6kV to 10kV for low range Robust IGBT
HITEK POWER MPM SERIES MINIATURE HIGH VOLTAGE DC-TO-DC CONVERTERS
HITEK POWER MPM SERIES MINIATURE HIGH VOLTAGE DC-TO-DC CONVERTERS The MPM series offers a unique range of low cost, general purpose high voltage DC-to-DC converters. All units are configured for direct
ULTRAVOLT HIGH-POWER C SERIES HIGH VOLTAGE CAP-CHARGING SUPPLY
ULTRAVOLT HIGH-POWER C SERIES HIGH VOLTAGE CAP-CHARGING SUPPLY High voltage cap-charging supplies The high-power line of high voltage regulated DCto-DC converters is an extension of the C series, directly
ULTRAVOLT HIGH-POWER C SERIES
HIGH VOLTAGE CAP-CHARGING SUPPLY The Ultravolt high-power line of high voltage regulated DC-to-DC converters is an extension of the C series, directly addressing the high power density needs of > 30 W
ULTRAVOLT TF SERIES HIGH VOLTAGE TEST FIXTURES
ULTRAVOLT TF SERIES HIGH VOLTAGE TEST FIXTURES Reduced-size HV test fixture devices The TF series product line supports the need to make accurate measurements of high voltage power supply (HVPS) and HV
ULTRAVOLT AA SERIES HIGH VOLTAGE BIASING SUPPLIES
ULTRAVOLT AA SERIES HIGH VOLTAGE BIASING SUPPLIES DC-DC single-output PCB-mount high voltage modules Page 2 The AA series consists of high voltage, miniature PCBmount, regulated DC-DC converters. Designed
ULTRAVOLT BIPOLAR HIGH POWER C SERIES
DUAL-OUTPUT HIGH VOLTAGE POWER SUPPLIES The UltraVolt bipolar C series line of regulated DC-to-DC high voltage converters is an extension of the high power C series. Bipolar C series units contain a pair
Sorensen HPD Series 300 W 5 20 A. 300 Watt DC Power Supply with Near-Linear Performance V. with automatic crossover and mode indication
Sorensen HPD Series 300 W 300 Watt DC Power Supply with Near-Linear Performance 15 60 V with automatic crossover and mode indication 5 20 A 115 230 The Sorensen High Power Density (HPD) Series provides
TYPICAL APPLICATIONS DRIVERS AMPLIFIERS
The HVA series of DC-to-DC high voltage power supplies operates a precision filter/divider and linear HV switch to produce a high voltage amplifier (HVA). These modules provide a high-resolution, programmable,
AOM Driver 2910 Series
AOM Driver 2910 Series 1 to 4 Watt RF Drivers for Acousto-Optic Modulators The 2910 Series RF driver provides up to 4 Watts output power. Various types cover a frequency range of 80 to 350 MHz. The maximum
ULTRAVOLT 20A AND 25A SERIES
PRECISION HIGH VOLTAGE DC CONVERTERS The UltraVolt 20A and 25A series of regulated DC-to-DC converters provide general-purpose high voltage power for a wide range of applications. PRODUCT HIGHLIGHTS Regulated
PEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
This convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.
RoHS Lead-Solder-Exemption Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included
MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
![MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]](/thumbs/80/80593914.jpg "MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]")
MODEL: MMNV Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels
DXM 300W-1200W X-RAY GENERATOR MODULE REV. AB
PAGE 1 OF 5 Compact & Lightweight Models from 20kV-160kV, 300W, 600W and 1200W Universal Input, Power Factor Corrected Hot Anode or Hot Cathode X-Ray Tube Capable Standard Digital Interfaces:, Ethernet
These medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.
The ABC450 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 450 W of output power and a variety of single and multiple output
AOM Driver A35-Series
AOM Driver A35-Series 5 Watt RF Drivers for Acousto-Optic Modulators The A35xxx RF driver series provides up to 5 Watt output power. Various types cover a frequency range from 40 to 350 MHz. The maximum
Product Specification sheet
INPUT MINIMUM RATED MAXIMUM Input Voltage 90V AC 100 240V AC 264V AC Input Frequency 47 Hz 50 / 60 Hz 63 Hz Input Current * 350mA Inrush Current **
STA3318 Series StellarMini TM 180 W, Ku-Band Antenna Mount TWTA
STA3318 Series StellarMini TM 180 W, Ku-Band Antenna Mount TWTA The STA3318 range of Ku-Band TWT amplifiers from e2v technologies provide over 150 W of output power in a compact, lightweight, rugged, weatherproof,
Electrical Specifications
300 Watt Industrial Features 3 x 5 x 1.5 inches Wide range AC input EMI Class B CE marked to LVD Class 1 & Class 2 options Input Voltage Input Frequency Electrical Specifications 90-264 VAC/120-390 VDC,
LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
These medical power supplies are ideal for, monitoring, home health equipment as well as surgical devices.
The MBC40 Series of open-frame medical power supplies, with its wide universal 90-264 VAC input range, is available at 40 W of output power and a variety of single and multiple output voltages. The MBC
PS16 SERIES. Features. Multiple Primary Windings: Either 120 VAC or 240 VAC, 50/60 Hz Operation 30 VDC, 36 VDC or 40 VDC Secondary Output Winding Taps
Description The PS unregulated power supplies have been designed to complement ADVANCED Motion Controls servo drives. Model PS is mounted on a base plate for multi-axis applications (mounting space provided
IMA 400 Watts Power Supply Series. for medical and industrial applications. Product data sheet
IMA 400 Watts Power Supply Series for medical and industrial applications Product data sheet 400 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
MODEL: 47LV. Digital Panel Meters 47 Series
Digital Panel Meters 7 Series DC INPUT DIGITAL PANEL METER ( ½ digit, LED display type) Functions & Features ½ digit DC input digital panel meter /8 DIN size Moving average function to suppress the display
MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]
![MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]](/thumbs/95/123316479.jpg "MODEL: M2MNV MODEL: M2MNV-[1][2]-[3][4]")
Super-mini Signal Conditioners Mini-M Series ANALOG SWITCHING MODULE Functions & Features Switches between two analog signal channels Switches/Distributes one voltage signal to two channels CE marking
TOS5300 SERIES Hipot Tester/Hipot Tester with Insulation Resistance Test
A new standard for Hipot & Insulation resistance testing Applied to World-Wide input voltage TOS5301 TOS5300 TOS5302 TOS5300(ACW) TOS5301(ACW/DCW) TOS5302(ACW/IR) New low-cost standard model that provides
High Voltage Power Supply EBM30N/XXX SAFETY AND INSTALLATION INSTRUCTIONS
Tel : +44 (0)1798 877000 Fax : +44 (0)1798 872479 e-mail : hvsales@spellmanhv.co.uk Broomers Park, Broomers Hill Lane Pulborough, W. Sussex, RH20 2RY High Voltage Power Supply EBM30N/XXX SAFETY AND INSTALLATION
The MDU150 Series provides the same benefits as the MPU150 Series, with nominal 48 volt DC input.
The innovative MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints. The MPU150-4530G and MPU150-4350G provide high current +3.3 V and
AOM Driver 3307 Series
AOM Driver 3307 Series 1 to 4 Watt RF Drivers for Acousto-Optic Modulators The 3307 Series RF driver provides up to 4 Watts output power. Various types cover a frequency range of 80 to 350 MHz. The maximum
Industrial Serie +600S
D A T A S H E E T Industrial Serie +6S Modular Configurable Reduced fan noise Enhanced Line Derating 6 watts in the palm of your hand The +6S series fetures improved low input line derating delivers 6
PHV 1000-RO. High impedance passive probe. Features: CeramCore TM hybrid probe. Modular construction. Coaxial design
High impedance passive probe Features: CeramCore TM hybrid probe Modular construction Coaxial design Interchangeable spring contact tip Certificate of calibration available on request Read-out BNC connector
Voltage Adjustment. Load Regulation
HIGH DENSITY, CONFIGURABLE AC-DC POWER SUPPLY RCB1200 SERIES DS RCB1200 RE02 NOEMBER 2010 Description The RCB1200 is a modular, user configurable power supply offering unrivalled performances and flexibility.
ULTRAVOLT -F OPTION RIPPLE STRIPPER OUTPUT FILTERS
ULTRAVOLT -F OPTION RIPPLE STRIPPER OUTPUT FILTERS Reduced ripple for HV power supplies The -F option Ripple Stripper output filter adds additional ripple-reduction circuitry internally to DCto-HV DC high
IMA 1000 Watts Power Supply Series. for medical and industrial applications. Product data sheet
IMA 1000 Watts Power Supply Series for medical and industrial applications Product data sheet Features 1000 Watts Power Supply Series for medical and industrial applications Safety rated for Medical, Industrial
ULTRAVOLT C SERIES HIGH VOLTAGE CAP-CHARGING SUPPLIES
ULTRAVOLT C SERIES HIGH VOLTAGE CAP-CHARGING SUPPLIES DC-to-H single-output high voltage capcharging modules The C series of high voltage regulated DC-to-DC converters are designed for fast rise time/charging
AUM FAMILY Programmable DC Power Supplies
AUM FAMILY Programmable DC Power Supplies 500W O/P Power 1U Half-Rack Front Panel Encoder & Tactile Switch Inputs 4-Digit Displays for V & I RS-485 & CAN Interface Standard Models IEEE488.2 or LAN, USB
ULTRAVOLT A SERIES HIGH VOLTAGE BIASING SUPPLY
ULTRAVOLT A SERIES HIGH VOLTAGE BIASING SUPPLY High voltage biasing supplies The A Series consists of miniature, PCBmount, high voltage, regulated DCDC converters. Designed and built utilizing stateoftheart
Model 3102D 0-2 kv H.V. Power Supply
Features Compact single width NIM package Regulated up to ±2000 V dc. 1 ma output Noise and ripple 3 mv peak to peak Overload and short circuit protected Overload, inhibit and polarity status indicators
Asia-Pacific North America Europe, Middle East Bel Power Solutions, Inc. BCD.
The MPU200/MDU200 Series is based upon the proven architecture of the MPU150/MDU150 product line. The MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet
Process displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
IMA 600 Watts Power Supply Series. for medical and industrial applications. Product datasheet
IMA 600 Watts Power Supply Series for medical and industrial applications Product datasheet 600 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
C B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
These power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
Three-Phase Winding Ohmmeter TWA25K
Three-Phase Winding Ohmmeter TWA25K Resistance measurement of all tap positions in all six windings performed in a single test Test currents 5 ma 25 A Extremely quick measurement, single-step cable setup
Metal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
MODEL: M2VF MODEL: M2VF [1][2] [3][4]
![MODEL: M2VF MODEL: M2VF [1][2] [3][4]](/thumbs/79/79182356.jpg "MODEL: M2VF MODEL: M2VF [1][2] [3][4]")
Super-mini Signal Conditioners Mini-M Series SIGNAL TRANSMITTER (high speed response) Functions & Features Converts DC input from a sensor into a standard process signal Isolation between input and output
TORKEL 900-series Battery Load Unit
Batteries can be tested in service Dynamic discharge technology full power at all voltages Safety in all details, e.g. detection of blocked airflow Real time monitoring during test Quick report Easily
R10-FA-01 Ruggedized Edge Filter for Xenus: User Guide
R10-FA-01 Ruggedized Edge Filter for Xenus: User Guide P/N 95-01178-000 Revision 1 January 2009 R10-FA-01 Ruggedized Edge Filter for Xenus This page for notes. TABLE OF CONTENTS About This Guide... 5 Overview
Output Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
MODEL: M2SES SEN TRONIC AG [3] OUTPUT
![MODEL: M2SES SEN TRONIC AG [3] OUTPUT](/thumbs/86/93838653.jpg "MODEL: M2SES SEN TRONIC AG [3] OUTPUT")
Super-mini Signal Conditioners Mini-M Series HIGH/LOW SELECTOR Functions & Features Monitors two DC input signals and transmits an output signal proportional to the higher or lower input CE marking UL
Current ON state current ma minimum, 6 ma typical, 10 ma maximum OFF state current ma maximum
DEVICE SPECIFICATIONS NI 6624 This document lists the specifications for the NI PCI/PXI-6624 device. These specifications are typical at 25 C unless otherwise noted. Refer to the NI 6624 User Manual for
(*) Reference the User Manual or contact the factory for parallel operation between modules plugged into slots 1/2/3/4 and slots 5/6/7/8.
HIGH DENSITY, CONFIGURABLE AC-DC POWER SUPPLY RCB1200 SERIES DS_RCB1200_RE04_OCTOBER 2015 DESCRIPTION The RCB1200 is a modular, configurable power supplies that provide high performance and outstanding
Output Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W
AEL15-80 Series 15-80 Watts Energy Efficiency Level V CEC 2008 and EISA 2007 Compliant Limited Power Source Approval China Compulsory Certification (CCC) Qualified +60 C Operating Temperature Compact Dimensions
Series AMSRL1-78JZ Up to 12 Watt DC-DC Switching Regulator
Click on Series name for product info on aimtec.com FEATURES: Picture Coming Soon Models Single output Model Input Voltage (V) Switching Regulator SMD Package Low Quiescent Current Efficiency Up To 95%
Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial
M9200 SERIES SINGLE OUTPUT HIGH POWER FACTOR 3-PHASE AC / DC CONVERTERS Up to 3.2 kw Applications Military (Airborne, ground-fix, shipboard), Ruggedized, Telecom, Industrial Special Features Very low input
American Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Fully Regulated Outputs to + or - 8000 Vdc 4 0-100% Programable Output 4 High Stability (
OEM s #1 Choice for X-Ray Sources and Generators. Focus on Performance, Reliability, Form Factor, and Versatility.
OEM s #1 Choice for X-Ray Sources and Generators Focus on Performance, Reliability, Form Factor, and Versatility www.vjtxray.com Applications Security, Industrial NDT, Food & Pharmaceutical, Quality &
MODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With
![MODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With](/thumbs/95/125412814.jpg "MODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With")
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator 1/1 high resolution Easy adjustment: electronic limiter at the valve open & closed
Electrical Specifications
450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN60601 3rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals
Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
Agilent N8700 Series System DC Power Supplies
Agilent N8700 Series System DC Power Supplies Models: N8731A-42A (3.3 kw), N8754A-62A (5 kw) Data Sheet 21 Models: 3300 W and 5000 W output power Up to 600 V and up to 400 A Small, high density 2 U package
Power Supplies for every application
Power Supplies for every application SRP SERES SRP-25 25 Watt Multi Output SRP-40A 40 Watt Multi Output SRW-100 100 Watt Multi Output Universal (85-264Vac) nput Low Power (25-100 Watt) Up to 4 Outputs
NI SCXI Specifications
NI SCXI -1127 Specifications 32-Channel Relay Multiplexer/Matrix Input Characteristics This document lists specifications for the NI SCXI-1127 multiplexer/matrix module. All specifications are subject
HP005xAA025 10V to 5kV 2mA <20mV (pk-pk) <25ppm x 98 x HP030xAA V to 30kV 0.25mA <300mV (pk-pk) <20ppm x 120 x 55 1,7
HP Series Data Sheet HP0.5, HP001, HP2.5, HP005, HP010, HP015, HP020, HP030 PRECISION 10W HIGH VOLTGE MODULES pplication: Photomultiplier tubes, Mass spectrometers, Electron microscopes, Nuclear instruments,
An ideal AC Hipot Tester with low cost of ownership realized, built on more than 50 years of experience in market. Hipot (Withstanding Voltage) Tester
M O D E L T O S 5 2 0 0 An ideal AC Hipot Tester with low cost of ownership realized, built on more than 50 years of experience in market NEW Hipot (Withstanding Voltage) Tester AC Hipot Tester TOS5200
USER MANUAL XLB-650 Short Arc Xenon Lamp Ballast
26 Ward Hill Dr., Bradford, MA 01835 Phone: +1-978-241-8260 Fax: +1-978-241-8262 USER MANUAL XLB-650 Short Arc Xenon Lamp Ballast The XLB-650 Xenon lamp ballast is a very compact power supply designed
DECLARATION OF CONFORMITY
DECLARATION OF CONFORMITY Manufacturer's Name: Transmille Ltd. Manufacturer's Address: Unit 4, Select Business Centre Lodge Road Staplehurst TN12 0QW. United Kingdom. Declares, that the product Product
DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3
HPU1K5 Series Low Profile 1.7 (43.2 mm), Industrial Supply Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals Output Power up to 1500 W Load dependant variable speed fans for audible
150 Watt Industrial (WLT)
150 Watt Industrial (WLT) Features 4 x 2 x 1.3 inches form factor 150 W with forced-air cooling Class 1 & Class 2 options 12 V @ 0.5 A fan voltage auxiliary output High efficiency > 86% Low conducted and
NEVO+1200M. 6 x6 x W. 1.2kg DATA SHEET MAIN FEATURES
NEVO+1200M MEDICAL AC/DC MODULAR CONFIGURABLE POWER SUPPLY DATA SHEET 6 x6 x1.61 Small 1200W Powerful 1.2kg Light The NEVO+1200M is the smallest in its class and the ultimate power solution for medical
MDX DC 1 kw & 1.5 kw Series. Tight regulation Superior arc control Low stored output energy
MDX DC 1 kw & 1.5 kw Series Tight regulation Superior arc control Low stored output energy Benefits Tight regulation Improved yield Reduced target burn-in time High reliability Tight regulation, superior
Winding Ohmmeter RMO-TW
Winding Ohmmeter RMO-TW Two resistance measurement channels Accuracy 0,1 % Lightweight On-load tap changer verification Automatic resistance measurement for the Heat Run test Automatic discharge circuit
Watts HCP Series
ACDC 6 Watts HCP Series High Efficiency up to 9% xppower.com High Power Density Programmable Output Voltage (%%) Programmable (%%) Parallel Operation Fully Featured Signals & Controls Year Warranty Specification
MODEL: MRP6. Final Control Elements
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator Electrical positioner incorporated 1/1000 high resolution Easy adjustment: electronic
FC1010 FC10010 FC15030 BFC1010 BFC10010 BFC15030 BFC
Filter Cards for Single Phase Loads: Brushed Motors, Voice Coils, and other Single Phase Loads Filter Cards for Three Phase Loads: Brushless Motors, Linear Motors, and other Three Phase Loads Filter Cards
ULTRAVOLT XS SERIES EXTRA-SMALL HIGH VOLTAGE BIASING SUPPLIES
EXTRA-SMALL HIGH VOLTAGE BIASING SUPPLIES The UltraVolt XS series of extra-small high voltage power supplies is the smallest regulated DC-to-DC high voltage power supply for applications that require a
Power supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
TORKEL 900-series Battery Load Unit
TORKEL 900-series Batteries can be tested in service Dynamic discharge technology full power at all voltages Safety in all details, e.g. detection of blocked airflow Real time monitoring during test Easy
PHV RO. High impedance passive probe. Features: CeramCore TM Hybrid Probe. Modular Construction. Coaxial Design
High impedance passive probe Features: CeramCore TM Hybrid Probe Modular Construction Coaxial Design Interchangeable Spring Contact Tip Certificate of Calibration available on request Read-out BNC Connector
USER MANUAL XLB-2500 Short Arc Xenon Lamp Ballast
USER MANUAL XLB-2500 Short Arc Xenon Lamp Ballast The XLB-2500 Xenon lamp ballast is a very compact power supply designed for OEM applications. The XLB-2500 is ideal for high power applications where economy
CLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
MODEL: M2DYS SEN TRONIC AG
Super-mini Signal Conditioners Mini-M Series CURRENT LOOP SUPPLY Functions & Features Powers a 20 ma DC current loop Short circuit protection Applicable to smart transmitters CE marking UL approval Typical