Series AM30EW-Z 30 Watt DC-DC Converter

Size: px

Start display at page:

Download "Series AM30EW-Z 30 Watt DC-DC Converter"

Posy Daniel
5 years ago
Views:

short circuit protection RoHS compliant Voltage Current max (A) Maximum Capacitive (uf) Efficiency (%) AM30EW-203SZ 9-3 3.3 7. 20000 8 AM30EW-20SZ 9-3 1000 88 AM30EW-20.1SZ 9-3.

1 FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage Ultra Wide :1 input range Remote on/off control Efficiency up to 91% Input/ Isolation 100VDC Soft start Operating temperature -0ºC to + 7ºC Continuous short circuit protection RoHS compliant Voltage Current max (A) Maximum Capacitive (uf) Efficiency (%) AM30EW-203SZ AM30EW-20SZ AM30EW-20.1SZ AM30EW-212SZ AM30EW-21SZ AM30EW-803SZ AM30EW-80SZ AM30EW-80.1SZ AM30EW-812SZ AM30EW-81SZ Add suffix -K for optional heat sink Models Dual output Model Input Voltage Voltage Current max (A) Maximum Capacitive (uf) Efficiency (%) AM30EW-20DZ 9-3 ± ±3 ± AM30EW-212DZ 9-3 ±12 ±1.2 ± AM30EW-21DZ 9-3 ±1 ±1 ± AM30EW-80DZ 18-7 ± ±3 ± AM30EW-812DZ 18-7 ±12 ±1.2 ± AM30EW-81DZ 18-7 ±1 ±1 ± Add suffix -K for optional heat sink Models Triple output Model Input Voltage Voltage Auxiliary Voltage Current max (A) Maximum Capacitive (uf) Efficiency (%) AM30EW-20312TZ ±12 / ± / ± AM30EW-2031TZ ±1 / ± / ± AM30EW-2012TZ 9-3 ±12 / ± / ± AM30EW-201TZ 9-3 ±1 / ± / ± AM30EW-80312TZ ±12 / ± / ± AM30EW-8031TZ ±1 / ± / ± AM30EW-8012TZ 18-7 ±12 / ± / ± AM30EW-801TZ 18-7 ±1 / ± / ± Add suffix -K for optional heat sink NOTE: All specifications in this datasheet are measured at an ambient temperature of 2 C, humidity<7%, nominal input voltage and at rated output load unless otherwise specified. F 01e R11.K 1 of 7 North America only

2 Input Specifications Parameters Nominal Typical Maximum Units Voltage range VDC Filter π (Pi) Network Start up time 30 ms Absolute Maximum Rating ~ ~ 100 VDC Peak Input Voltage time 100 ms On/Off control ON: 3 ~12VDC or open circuit OFF: 0 ~ 1.2VDC or Short circuit between pin 2 and pin 3 No Input Current Vin 9~3 100 Vin 3~7 0 ma Under voltage lockout 2V ON/OFF 8.8 / 7.9 8V ON/OFF 17.8 / 1 VDC Input reflected current 20 map-p Isolation Specifications Parameters Conditions Typical Rated Units Tested I/O voltage 3 sec 100 VDC Case/Input tested voltage 3 sec 100 VDC Resistance 1000 MOhm Capacitance 100 pf Specifications Parameters Conditions Typical Maximum Units Voltage accuracy (Single and Dual) ±1 % Voltage accuracy (Triple) Main / Auxiliary ±1 / ± Cross Regulation (Dual Models) 2% load on one output - 100% load on ± % second load Cross Regulation (Triple) Main 100%, 2% load on Aux1 and 100% ± on Aux2 Over voltage protection Zener diode clamp Over current protection 120 % Short Circuit protection Continuous Short circuit restart Auto-Recovery Thermal Shutdown Case temp 11 o C Line voltage regulation (Single) HL-LL ±0.2 % Line voltage regulation (Dual) HL-LL ±0.2 % Line voltage regulation (Triple) HL-LL Main / Auxiliary ±1 / ± % voltage regulation (Single) 0-100% load ±0. % voltage regulation (Dual) Balanced load ±1 % voltage regulation (Triple) 10~100% Main / Auxiliary ±1 / ± % Temperature coefficient ±0.02 %/ o C Ripple & Noise (Single and Dual) 20MHz bandwidth, 3.3V/V/.1V/±V MHz bandwidth, 12V/1V/±12V/±1V 10 mv p-p Ripple & Noise (Triple) 20MHz bandwidth Main / Auxiliary 0 / 7 mv p-p Voltage adjustment range (single) ±10 % Minimum Current 10 % of Max F 01e R11.K 2 of 7 North America only

3 General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 330 KHz Operating temperature Derating above 0-0 to +7 o C Storage temperature -0 to +12 o C Maximum case temperature 10 o C Derating 2 %/ o C Cooling Free Air Convection Humidity 9 % RH Case material Nickel coated Copper Weight 30 g Dimensions (L x W x H) 2.00 x 1.00 x 0. inches 0.80 x 2.0 x mm MTBF Single & Dual: >0000 hrs (MIL-HDBK -217F, Ground Benign, t=+2ºc) Triple: > hrs (MIL-HDBK -217F, Ground Benign, t=+2ºc) Maximum soldering temperature 1.mm from case for 10 sec 20 o C Transient recovery time 20 us Transient recovery deviation ±3 % Safety Specifications Parameters Agency Approval Standards CE EN022 Class A, EN02 IE000--2, Perf. Criteria B IE000--3, Perf. Criteria A IE000--, Perf. Criteria B (external 220uF/100V cap required) IE000--, Perf. Criteria B (external 220uF/100V cap required) IE000--, Perf. Criteria A IE000--8, Perf. Criteria A Pin Out Specifications Pin Single Dual Triple 1 + V Input + V Input + V Input 2 - V Input - V Input - V Input 3 On/Off Control On/Off Control On/Off Control + V + V + Vaux -V Common - Vaux Trim - V Common 7 No Pin No Pin + V F 01e R11.K 3 of 7 North America only

Dimensions Single and Dual Models 0.80 (2.00) 1 2.0 (1.00) 2 Bottom View 3 Diameter 1.00 (0.0) Notes: All dimensions are typical in millimeters (inches). Pin Pitch Tolerance ±0.3 (±0.

4 Dimensions Single and Dual Models 0.80 (2.00) (1.00) 2 Bottom View 3 Diameter 1.00 (0.0) Notes: All dimensions are typical in millimeters (inches). Pin Pitch Tolerance ±0.3 (±0.01) Case Tolerance ±0.0 (±0.02) Triple Models 0.80 (2.00) 7. (0.30) 7. (0.30) 2.0 (1.00) 1 2 Bottom View 3 7 Notes: All dimensions are typical in millimeters (inches). Pin Pitch Tolerance ±0.3 (±0.01) Case Tolerance ±0.0 (±0.02) Dimensions with Optional Heat Sink 0.8 (2.0) 2. (1.0) SIDE 1.3 (0.) END Notes: Add -K suffix for ordering, heat sink is affixed with thermally dissipative adhesive tape. See derating graph for temperature performance. Heat sink material is anodized (black) aluminum, adds weight 11.2g to total mass (1.2g). Thermal impedance of converter is: with heat sink 10 /W and 12 /W without heat sink F 01e R11.K of 7 North America only

5 Derating Free Air Convection Power % Safe Operating Area 0 ºC 0 ºC Heatsink Ambient Temperature º C Extended temperature performance can be achieved with optional heat sink. (add suffix K to part number) Trimming On/Off Control On/Off Control 7 Positive logic turns on the module during high logic and off during low logic. Module can be controlled by an external switch between the On/Off CTRL terminal and Vinput terminal. The switch can be either open collector or open drain. F 01e R11.K of 7 North America only

6 Recommended Circuits L C2 100uF, 100V 12uH 120, 70pF, 2KV Conducted/Radiated Emissions Single L +V output -V output C2 Conducted/Radiated Emissions Dual L +V output -V output Common C2 Conducted/Radiated Emissions Triple L +Vaux -Vaux +V output Common C2 F 01e R11.K of 7 North America only

7 Surge/EFT 220uF, 100V Surge/EFT 7 NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only.. All specifications are measured at an ambient temperature of 2 C, humidity<7%, nominal input voltage and at rated output load unless otherwise specified.. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release.. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec s standard Terms of Sale available at F 01e R11.K 7 of 7 North America only

Series AM30EW-Z 30 Watt DC-DC Converter

Series AM30EW-Z 30 Watt DC-DC Converter EATURES: Models Single output Model Input Voltage Ultra Wide 4:1 input range Remote on/off control Efficiency up to 91% Input/ Isolation 1600VDC Soft start Operating temperature -40ºC to + 75ºC Continuous