HARTMAN Lightweight High Performance DC Contactors
|
|
|
- Stephen Walsh
- 5 years ago
- Views:
Transcription
1 K Series Connectors Product Facts n Light weight n Small package size n Small footprint n Easy to package in panel assemblies n Buss bar mount or chassis mount n Designed to meet the applicable portions of MIL-PRF-6106 n 10X rupture current TE HARTMAN brand of K Series contactors offer outstanding performance and reliability in a highly efficient package. The HARTMAN brand K-Series are among the smallest and lightest ampere DC contactors available in the aerospace industry. These highly flexible buss bar mounted or chassis mounted units are designed for either continuous or start duty applications in the DC power distribution systems of military and commercial aircraft and ground vehicles Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit
2 K Series, Rated up to 200 Amps, 28 Vdc Product Facts n SPST NO, Double break n Buss bar or chassis mount available n Gasket sealed n Auxiliary contacts available n Meets many requirements of MIL-PRF-6106 Coil Type Circuit Configurations (Consult factory for other available circuit configurations) A Electronic Economized with Suppression Performance Data Electrical Characteristics Contact Arrangement SPST NO, Double Break Rated Operating Voltage 28 Vdc Resistive Rating 200 Amps Rupture Rating 2,000 Amps General Characteristics Temperature Range -40 C to +85 C Operating Cycles (Life) at Rated Resistive Load, Min. 50,000 cycles Operating Cycles (Life) Mechanical, Min. 100,000 cycles Dielectric Strength All Circuits to Ground 1,500 Vrms Circuit to Circuit 1,500 Vrms Coil to Ground and Aux. Contacts 1,000 Vrms Insulation Resistance, Initial 100 megohm min. Altitude Max. 50,000 ft. Weight, Max lbs Coil Characteristics Duty Cycle AC (Type A, See diagram below), Economized (Type B, See diagram below), Economized with suppression (Type C, See diagram below), Continuous or Intermittent (Type D & F, See diagram below), Continuous or Intermittent with suppression (Type E & G, See diagram below) Operating Voltage, Nom. 28 Vdc Pickup 20 C, Max. 18 Vdc Circuit Configuration 1 Circuit Configuration 2 HARTMAN Construction Mounting Coil Circuit TE Part Number Type Style Type Config. Part Number K200A1C Gasket B A K200B3C02 Gasket A A K200B1C Gasket C A K200A3C Gasket E A Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit HARTMAN Lightweight HP DC Contactors
3 K Series, Rated up to 200 Amps, 28 Vdc (Continued) Mounting Style A 6 56 Mounting Style B Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit
4 K Series, Rated up to 200 Amps, 28 Vdc (Continued) Mounting Style C 6 HARTMAN Lightweight HP DC Contactors Mounting Style E Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit 6 57
5 K Series, Rated up to 400 Amps, 28 Vdc Product Facts n SPST NO, Double break n Buss bar or chassis mount design n Gasket sealed n Auxiliary contacts available n Meets many requirements of MIL-PRF-6106 Performance Data Electrical Characteristics Contact Arrangement SPST NO, Double Break Rated Operating Voltage 28 Vdc Resistive Rating 400 Amps Overload Rating 3,200 Amps Rupture Rating 4,000 Amps General Characteristics Temperature Range -40 C to +85 C Operating Cycles (Life) at Rated Resistive Load, Min. 50,000 cycles Operating Cycles (Life) Mechanical, Min. 100,000 cycles Dielectric Strength All Circuits to Ground 1,250 Vrms Circuit to Circuit 1,250 Vrms Coil to Ground and Aux. Contacts 1,000 Vrms Altitude, Max. 50,000 ft. Weight, Max lbs Coil Characteristics Duty Cycle Economized with suppression (Type A, See diagram below), Continuous (Type B, See diagram below), Intermittent (Type C, See diagram below) Operating Voltage, Nom. 28 Vdc Pickup 250 C, Max. 18 Vdc - Economized and continuous duty coil 12 Vdc - Intermittent duty coil Dropout Voltage, Max. 7 Vdc - Economized and continuous duty 5 Vdc - Intermittent duty coil Coil Type A Economized with Suppression B Continuous C Intermittent 6 58 HARTMAN Construction Mounting Coil Circuit TE Part Number Type Style Type Config. Part Number K4001A3C Gasket Sealed F A K4001B3C Gasket Sealed A A K400A1D Gasket Sealed B C 1 K400A1F Gasket Sealed B B K400A4C1 Gasket Sealed K A K400B1D Gasket Sealed E C K400B1F Gasket Sealed E B K400B3C05 Gasket Sealed C A K400B712C Gasket Sealed D A K4001B7C Gasket Sealed A A K4001A7C Gasket Sealed F A K4001B2C Gasket Sealed A A K4001A2C Gasket Sealed F A K400A1F1 Gasket Sealed G B Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit
6 K Series, Rated up to 400 Amps, 28 Vdc (Continued) Mounting Style A Mounting Style B 6 HARTMAN Lightweight HP DC Contactors Mounting Style C Mounting Style D Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit 6 59
7 K Series, Rated up to 400 Amps, 28 Vdc (Continued) Mounting Style E Mounting Style F 6 60 Mounting Style G Mounting Style K Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit
8 K Series, Rated up to 400 Amps, 28 Vdc (Continued) Circuit Configurations (Consult factory for other available circuit configurations) Circuit Configuration 1 Circuit Configuration 2 Circuit Configuration 3 Circuit Configuration 4 Circuit Configuration 5 Circuit Configuration 6 Circuit Configuration 7 6 HARTMAN Lightweight HP DC Contactors Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit 6 61
9 K Series, Rated up to 500 Amps, 28 Vdc Product Facts n SPST NO, Double break n Buss bar or chassis mount designs n Gasket sealed n Multiple auxiliary contact choices n Meets many requirements of MIL-PRF-6106 Performance Data Electrical Characteristics Main Contacts Contact Arrangement SPST NO, Double Break Rated Operating Voltage 28 Vdc Resistive Rating 500 Amps Rupture Rating 5,000 Amps Auxiliary Contacts Aux. Contact Arrangement 3 SPDT Rated Operating Voltage 28 Vdc Resistive Rating 5 Amps Lamp Rating 1 Amps Low Level 1 28 Vdc General Characteristics Temperature Range -55 C to +85 C Operating Cycles (Life) at Rated Resistive Load 50,000 cycles Operating Cycles (Life) Mechanical 100,000 cycles Altitude 50,000 ft. Weight, Max..88 lbs Operate 18 Vdc & 85 C, Max. 45 msec Dropout 32 Vdc, Max. 25 msec Coil Characteristics Duty Cycle Continuous, economizing Operating Voltage, Nom. 28 Vdc Pickup Voltage, Max. 18 Vdc Dropout Voltage 1 to 7 Vdc Inrush 5 Amps 32 Vdc & -55 C ma max. Coil Type A Economized with Suppression 6 62 Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit
10 K Series, Rated up to 500 Amps, 28 Vdc (Continued) Mounting Style A 6 HARTMAN Lightweight HP DC Contactors Mounting Style B Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit 6 63
11 K Series, Rated up to 500 Amps, 28 Vdc (Continued) Circuit Configurations (Consult factory for other available circuit configurations) Circuit Configuration 1 Circuit Configuration 2 Circuit Configuration 3 HARTMAN Construction Mounting Coil Circuit TE Part Number Type Style Type Config. Part Number K500B2C Gasket Sealed A A K500A2C Gasket Sealed B A K500B3C Gasket Sealed A A K500A3C Gasket Sealed B A K500B7C01 Gasket Sealed A A K500A7C01 Gasket Sealed B A PageHead_12_HelvCdBd K Series, Rated up to 500 (Continued) Amps, 28 Vdc Time Delay Product Facts n SPST NO, Double break n Delay on operator or release n Chassis Mount (bus bar mount available) n Gasket sealed n Meets many requirements of MIL-PRF-6106 Performance Data Electrical Characteristics Contact Arrangement SPST NO, Double Break Rated Operating Voltage 28 VDC Resistive Rating 500A Rupture Rating 5000A Delay on operate or release See note 1 General Characteristics Temperature Range -55 C to +85 C Minimum Electrical Cycles 50,000 Minimum Mechanical Cycles 125A Dielectric Strength 1000 Vrms Altitude 50,000 ft Weight, Max. 1.0 lbs Duty Cycle Intermittent or Continuous (See note 2) Operating Voltage Range Vdc Drop Out Voltage 1 to 7 Vdc 6 64 NOTES 1. Delay can be tailored to meet customer need. Consult Factory. 2. Intermittent duty coil is recommended for starting applications where significant control voltage sags are possible. Consult factory to specify correct coil duty for your application. Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit
12 K-1000 Series, Rated up to 1,000 Amps, 28 Vdc Product Facts n SPST NO, Double break n Gasket sealed n Meets many requirements of MIL-PRF-6106 Performance Data Electrical Characteristics Contact Arrangement SPST NO, Double Break Rated Operating Voltage 28 Vdc Resistive Rating 1,000 Amps General Characteristics Temperature Range -55 C to +71 C Operating Cycles (Life) at Rated Resistive Load 50,000 cycles Operating Cycles (Life) Mechanical 100,000 cycles Weight, Max lbs Coil Characteristics Duty Cycle Continuous, economizing Operating Voltage, Nom. 28 Vdc Pickup Voltage, C 18 Vdc Dropout Voltage 1 to 8 Vdc Current, Inrush, 30 Vdc 7.0 Amps Current, Hold, 30 Vdc 1.0 Amps Mounting Style A Circuit Configurations (Consult factory for other available circuit configurations) Circuit Configuration 1 HARTMAN Construction Mounting Coil Circuit TE Part Number Type Style Type Config. Part Number K-1000A1F03 Gasket Sealed A Continuous HARTMAN Lightweight HP DC Contactors Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: please visit 6 65
D7, DH7, DHR7, DR7 Series, Rated up to 50 Amps, 115/200 VAC, 400 Hz
Product Facts n 3PDT and 3PST NO n Gasket sealed or Hermetically sealed n Auxiliary contacts available n Meets many requirements of MIL-PRF-6106 115/200 VAC, 400 Hz See Part Number Table on Last Page Performance
SERIES KC RELAY NONLATCH 3PDT, 25 AMP
All welded construction Contact arrangement 3 PDT configuration in one inch cube Qualified to MIL-PRF-83536 PRINCIPLE TECHNICAL CHARACTERISTICS Applicable sockets: SO-1057-8912 Contacts rated at 28 Vdc;
KILOVAC EV200 Series Contactor With 1 Form X (SPST-NO) Contacts Rated 500+ Amps, Vdc
Product Facts Designed to be the smallest, lightest weight, lowest cost sealed contactor in the industry with its current rating (500+A carry, 2000A interrupt at 320VDC) Built-in coil economizer only 1.7W
YL SERIES RELAY LATCH DC COIL 4PDT, LOW LEVEL TO 5 AMP
Magnetic latch operation All weld construction Contact arrangement 4 PDT Qualified to MIL-PRF-6106 PRINCIPLE TECHNICAL CHARACTERISTICS Applicable sockets: SO-1066-001 SM-1002-003 Contacts rated at Low
Introducing. CII FCA-150 Series Relay 50 Amps, 1PST/NO (DM) CII FCAC-150 Series Relay 50 Amps, 1PST/NO (DM) with 1PDT Auxiliary Contacts
Introducing CII Series Relay 50 Amps, 1PST/NO (DM) CII Series Relay 50 Amps, 1PST/NO (DM) with 1PDT Auxiliary Contacts Key Features Non-latching relay Balanced force design Corrosion protected metal enclosure
Table of Contents. Kilovac Time Delay Relays
Table of Contents 1600/1700 Series, Delay on Operate, Fixed & Adjustable......................8-2, 8-3 2400 Series, Subminiature, Delay on Operate, Fixed.............................8-4 5600/5700 Series,
PRODUCT DESCRIPTION PAG ES. E110 Series 1PDT, 10 AMP RELAY 2-6. E310 Series 3PDT, 10 AMP RELAY E210 / E215 Series 2PDT, 10/15 AMP RELAY 13-19
Index PRODUCT DESCRIPTION PAG ES E110 Series 1PDT, 10 AMP RELAY 2-6 E310 Series 3PDT, 10 AMP RELAY 7-12 E210 / E215 Series 2PDT, 10/15 AMP RELAY 13-19 E410 / E415 Series 4PDT, 10/15 AMP RELAY 20-24 E610
PERFORMANCE SPECIFICATION SHEET RELAY, ELECTROMAGNETIC PERMANENT MAGNET DRIVE, 25 AMPERES, SPDT, HERMETICALLY SEALED
INCH-POUND MIL-PRF-6106/19G 18 November 2011 SUPERSEDING MIL-PRF-6106/19F 10 November 2000 PERFORMANCE SPECIFICATION SHEET RELAY, ELECTROMAGNETIC PERMANENT MAGNET DRIVE, 25 AMPERES, SPDT, HERMETICALLY
AEROSPACE, DEFENSE & MARINE /// KCS03 CURRENT SENSING CONTACTOR
Current-Sensing High-Voltage Contactor 600 A/28 VDC 600 VDC Bi-Directional Power Switching in a Rugged, Compact Package with Integrated Current Sensor and Current Trip Function Current-Sensing High-Voltage
AEROSPACE, DEFENSE & MARINE /// KILOVAC KCS03 CURRENT SENSING CONTACTOR
Current-Sensing High-Voltage Contactor 600 A/28 VDC 600 VDC Bi-Directional Power Switching in a Rugged, Compact Package with Integrated Current Sensor and Current Trip Function Current-Sensing High-Voltage
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-83536/32D 03 October 2017 SUPERSEDING MIL-PRF-83536/32C 21 April 2015 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 3PDT, 25 AMPERES (RESISTIVE),
Table of Contents. CII Mid-Range Relays
Table of Contents TD2 Series Time Delay Relays, per MIL-PRF-83726/28, /29, /30, & /31..........5-2 5-5 Double-pole, Electrically Held, 5 mps and Less FC-205 Series.................................................5-6
Hybrid & Electric Mobility Solutions Electric Vehicle Contactors
EVC Contactor continuous carry Hermetically Sealed Form X 2 4 Performance Data Parameter Units Values Contact rrangement, power contacts Rated Operating Voltage Continuous (Carry) Current, Typical Limiting
MIL-PRF-83536/5C 08 June 2010 SUPERSEDING MIL-PRF-83536/5B 04 December 2008 PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-83536/5C 08 June 2010 SUPERSEDING MIL-PRF-83536/5B 04 December 2008 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 5 AMPERES, PERMANENT
AEROSPACE, DEFENSE & MARINE /// KCS01 CURRENT SENSING CONTACTOR
Current-Sensing High-Voltage Contactor 100 V / 600 VDC Bi-Directional Power Switching in a Rugged, Compact Package with Integrated Current Sensor and Current Trip Function Current-Sensing High-Voltage
DPC F - P3-24. Part Number Scheme. Dimensions
Description Definite Purpose Contactor Definite Purpose contactors are electrically operated switching devices specifically designed for the heating, ventilation, air conditioning, heat pump and refrigeration
DETAIL SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, 10 AMPERES, 2 PDT TYPE I, MAGNETIC LATCH, STUD MOUNTED, SOLDER HOOKS, HERMETICALLY SEALED
INCH-POUND DETAIL SPECIFICATION SHEET MS25466F 27 November 2003 SUPERSEDING MS25466E 20 Jan 1989 RELAYS, ELECTROMAGNETIC, 10 AMPERES, 2 PDT TYPE I, MAGNETIC LATCH, STUD MOUNTED, SOLDER HOOKS, HERMETICALLY
MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS DPDT RELAY TYPE. DPDT relay with internal diode for coil transient suppression
ESTABLISHED RELIABILITY SERIES DESIGNATION MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS DPDT 420/422 DPDT basic relay 420D/422D 420DD/422DD RELAY TYPE DPDT relay with internal diode for coil transient
FIGURE 1. Design, dimensions, and circuit diagram.
INCH-POUND DETAIL SPECIFICATION SHEET MS25463J 27 November 2003 SUPERSEDING MS25463H 7 December 1993 RELAYS, ELECTROMAGNETIC, 6 PDT, 5 AMPERES, TYPE I, MAGNETIC LATCH, SOCKET MOUNTED, HERMETICALLY SEALED
PEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
CENTIGRID ESTABLISHED RELIABILITY RELAYS
SERIES DESIGNATION CENTIGRID ESTABLISHED RELIABILITY RELAYS SENSITIVE DPDT 134 DPDT basic relay 134D 134DD RELAY TYPE DPDT relay with internal diode for coil transient suppression DPDT relay with internal
Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
Subminiature Automotive Relays Type CV20 Monostable
Subminiature Automotive Relays Type CV20 Subminiature relay Switching capacity 20 A DC coils 6 to 24 VDC 1 change over contact/1 double make contact High resistance to vibration and shock Low power consumption
MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS
MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS SPDT SERIES 421 SERIES DESIGNATION RELAY TYPE 421 SPDT basic relay 421D 421DD SPDT relay with internal diode for coil transient suppression SPDT relay
KRPA, KRP, KA, KR series
Catalog 1084 Issued -0 KRPA, KRP, KA, KR series to 10 Amp General Purpose Relay File E944, E, E818 (KR Hermetic) File LR14 KRPA KRP KA Users should thoroughly review the technical data before selecting
2 LABINAL POWER SYSTEMS TF300-9E
RELAY CATALOG LAINAL POWER SYSTEMS TF300-9E SENSING & CONTROLS RELAY CATALOG Table of Contents 3 4 4-8 9-0 -30 3-37 38-4 Table of Contents Fast Information Finder Part Number to Page Index Capabilities
DEFENSE LOGISTICS AGENCY DLA Land and Maritime POST OFFICE BOX 3990 COLUMBUS, OH
DEFENSE LOGISTICS AGENCY DLA Land and Maritime POST OFFICE BOX 3990 COLUMBUS, OH 43218-3990 23 August 2018 MEMORANDUM FOR MILITARY/INDUSTRY DISTRIBUTION SUBJECT: Initial Draft of MIL-PRF-39016/54E. Project
TO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT
TO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT SERIES RELAY TYPE DPDT basic relay D DPDT relay with internal diode for coil transient suppression DD DPDT relay with polarity reversal protection and
TO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT
TO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT SERIES RELAY TYPE DPDT basic relay D DPDT relay with internal diode for coil transient suppression DD DPDT relay with polarity reversal protection and
AGASTAT E7000 Series, Nuclear Qualified Time Delay Relays
AGASTAT E7000 Series, Nuclear Qualified Time Delay Relays Seismic and Radiation Tested In order to satisfy the growing need for electrical control components suitable for class 1E service in nuclear power
POWER RELAYS CONTINUOUS DUTY, TYPE II, UNSEALED INTERMITTENT DUTY, TYPE III, UNSEALED
POWR RLYS INUOUS DUTY, TYP II, UNSLD INTRMITTNT DUTY, TYP III, UNSLD General Specifications Designed to MIL-R- - Type II Unsealed ontinuous Duty - Type III Unsealed Intermittent Duty - overed/gasketed
SAFRAN ELECTRICAL & POWER
RELAY CATALOG SAFRAN ELECTRICAL & POWER SMARTER ELECTRICAL SOLUTIONS FOR A ETTER FLIGHT At Power we innovate to provide greener, reliable and cost-effective electrical solutions. We are one division "Powering-On"
Auxiliary Contact (10 600V) Auxiliary Contact (10 5V DC)
Bulletin C,, C Accessories Accessories Auxiliary Contacts Contactors are supplied with one normally open and one normally closed auxiliary contact (A rating) as standard. Additional auxiliary contacts,
Polarized, latching hermetically sealed relay Contact arrangement. 3 PDT Coil supply
ENGINEERING DATA SHEET M502 RELAY - LATCH 3 PDT, 25 AMP Polarized, latching hermetically sealed relay Contact arrangement 3 PDT Coil supply Direct current Meets the requirements of MA 27742 PRINCIPLE TECHNICAL
Precision and High Reliability Thermostats Issue 3. Datasheet. Table of Contents
Precision and High Reliability Thermostats DESCRIPTION Thermostats can provide either temperature control or overtemperature protection by breaking electrical contact when a specified temperature is reached.
mto Series Page 1 of 6 MTO Rev C models +5 & ±12 +5 & ±15
28 Volt Input NOT RECOMMENDED FOR NEW DESIGNS mto Series Features 55 C to +85 C operation 16 to 36 VDC input 50 V for 50 ms transient protection Fully isolated Fixed frequency switching Inhibit function
Hexa Multi Module 366HMM. Introduction. Design Specifications. Key Features
Hexa Multi Module Introduction The E-Plex 366HMM is a six channel DC power distribution module capable of handling loads of up to 15A per channel or 50A total. The six channels can be utilized as either
Making the Best Better
Relay Catalog Making the est etter Traditional aerospace component suppliers are being asked to assume even greater levels of responsibility. One trend is that component manufacturers are being asked to
FT201 PRODUCT MANUAL PART NUMBER: SG REVISION: A
FT201 PRODUCT MANUAL PART NUMBER: SG072310005 REVISION: A FT201 PRODUCT MANUAL General The FT201 is designed to be both a tester and demo unit for spreader controls. Using the proper interface cable the
TOSHIBA International Corp
TOSHIBA International Corp GUIDE SPECIFICATIONS THREE PHASE UNINTERRUPTIBLE POWER SYSTEM TOSHIBA 4200FA 30 kva CT Internal Battery UPS GUIDE SPECIFICATIONS 1 (30 kva CT) 1.0 SCOPE 1.1 System This specification
Aegis Power Systems, Inc., P.O. Box 429, 805 Greenlawn Road, Murphy, NC Tel: (828) Table 1: Maximum Ratings
Aegis Power Systems, Inc., P.O. Box 429, 805 Greenlawn Road, Murphy, NC 28906 Tel: (828) 837-4029 www.aegispower.com 600F DC-DC Power Converter (Document Rev A01, 10/8/18) High Voltage Balanced 600Vdc
Type 3RW RW40 7. Control electronics Rated values. Terminal. external DC supply (to DIN 19240) through terminals and IN Relay outputs
Function have all the same advantages as the 3RW30/31 soft starters. At the same they come with additional functions and a two-phase control method (Polarity Balancing) that is unique in the rating range
Asia-Pacific North America Europe, Middle East Bel Power Solutions, Inc. BCD.
The MPU200/MDU200 Series is based upon the proven architecture of the MPU150/MDU150 product line. The MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet
CX-Series. Circuit Breaker
CX-Series Circuit Breaker Carling Technologies is proud to introduce the CX-Series circuit breaker, which features a unique and innovative patent pending arc quenching configuration that allows the breaker
NOT RECOMMENDED FOR NEW DESIGNS
28 Volt Input NOT RECOMMENDED FOR NEW DESIGNS Series Features -40 C to +85 C operation 18 to 36 VDC input Transient protection 50 V for 50 ms for 28 Vin models Fully isolated Fixed frequency switching
Contactors. Series C137, C163, C164, C165 Single pole contactors for battery voltages Catalogue B60.en
Contactors Series C7, C6, C6, C65 Single pole contactors for battery voltages Catalogue B.en Contactors for battery voltages C7, C6, C6, C65 Series With its proven line of C7 through C65 Series contactors
G8HN-J. Specifications. Contact Data. Automotive PCB Relay based on Micro ISO. Features
Automotive PCB Relay based on Micro ISO Features DC 24V specification. High capacity specification (35A). Covered MINI ISO by high capacity type. Achieve low heat generation and improve connection confidence
This convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.
RoHS Lead-Solder-Exemption Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included
C-Series. Circuit Breaker.
-Series ircuit Breaker The -Series hydraulic/magnetic circuit breakers are ideal for applications that require higher amperage and voltage handling capability in a smaller package. They are available in
The MDU150 Series provides the same benefits as the MPU150 Series, with nominal 48 volt DC input.
The innovative MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints. The MPU150-4530G and MPU150-4350G provide high current +3.3 V and
Top wiring permanent magnet latching For non-motor loads, lighting, heating NEMA sizes to 300 A 2-, 3-, and 4-pole configurations
Bulletin LP NEMA AC Permanent Magnet-Latching Lighting Contactors Product Overview/Product Selection/Wiring Diagram A, -Pole Open Type without Enclosure Bulletin LP Top wiring permanent magnet latching
Ledex Low Profile Linear Solenoids
Ledex Low Profile Linear Solenoids 8. (55.9) 6. (66.9). (77.9). (89.) % Duty Cycle W 5% Duty Cycle 8W 5% Duty Cycle 6W % Duty Cycle W Ledex Low Profile Solenoids Linear actuation Space-saving, low-profile
67TD Series - Miniature Time Delay Relays DPDT, 4PDT, 5 Amp
TD Series - Miniature Time Delay Relays DPDT, PDT, mp E When small size is a requirement series relays fit where others won t. The miniature ice cube timers are capable of handling up to amps. Typical
www. ElectricalPartManuals. com Westinghouse HRU Instantaneous Overcurrent Relay with Harmonic Restraint Descriptive Bulletin Page 1
Westinghouse Appl ication The H R U harmonic restraint relay is a high speed relay used for the supervision of differential, overcurrent. or pilot relays. It is applied in various transformer protection
RT series Miniature Printed Circuit Board Relays, Sockets and Accessories
RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets VDE 0mm Spacing, KV Dielectric File
Open Type Without Enclosure
Bulletin L NEMA AC Electrically Held Lighting Contactors Product Selection Top Wiring for Non-Motor and Lighting Loads Tungsten Lamp Loads (Max. V Line, V Load) Maximum Continuous Ampere Ratings [A] General
G6C. Miniature High Capacity Relays with SPST-NO 10A and SPST-NO + SPST-NC 8A. Model Number Legend. Application Examples.
Miniature High Capacity Relays with SPST-NO 0A and SPST-NO + SPST-NC A SPST-NO 0A and SPST-NO + SPST-NC A for power switching and output that satisfy the needs for space-saving. Small High-capacity Relays
(FOR AUTOMOTIVE APPLICATIONS)
COMPACT POWER RELAY POLE 2 A (FOR AUTOMOTIVE APPLICATIONS) FBR, 2 SERIES FEATURES Compact and lightweight structure (42% of the volume of the FBR relay) High current contact capacity (carrying current:
Very high efficiency up to 96.5% Up to 15 kw power. CAN bus serial interface. Adjustable output voltage. Protection degree IP67
\The Bel Power Solutions 700DNC150-56-x (700BDC150-56-x) is a 15000 Watts DC-DC converter that creates DC voltages in hybrid and electric vehicles necessary to power low voltage accessories. Attractive
Power PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6).
Power PCB Relay Subminiature 20 L x 9.90 W x 9.90 H mm (0.79 L x 0.39 W x 0.39 H in) Low power consumption (200 mw) Sealed construction permits automatic soldering and cleaning of the PC board High-capacity
MAGNETIC-LATCHING DPDT HALF-SIZE CRYSTAL CAN HIGH POWER RF RELAY DC-3 GHZ
MAGNETIC-LATCHING DPDT HALF-SIZE CRYSTAL CAN HIGH POWER RF RELAY DC-3 GHZ SERIES RELAY TYPE Commercial, DPDT, High Power, Half-Size Crystal Can Relay Commercial, DPDT, High Power, Half-Size Crystal Can
RT series Miniature Printed Circuit Board Relays, Sockets and Accessories
s 查询 RT40 供应商 捷多邦, 专业 PC 打样工厂,4 小时加急出货 RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets
(FOR AUTOMOTIVE APPLICATIONS)
COMPACT POWER RELAY POLE 2 A (FOR AUTOMOTIVE APPLICATIONS) FBR, 2 SERIES FEATURES Compact and lightweight structure (42% of the volume of the FBR relay) High current contact capacity (carrying current:
Distribution/Substation Transformer
Distribution/Substation Transformer Type VFI, Vacuum Fault Interrupter Transformer Option Functional Specification Guide Functional specification for 15 kv, 25 kv, or 35 kv vacuum fault interrupter distribution/substation
Switches Unlimited Contact: Phone: Fax:
Phone: 8--87 Fax: 78-67-67 - C Coil Three Pole - Series C7 C7 Non-Reversing, Three Pole With C Coil, Series C7 (Open type only) [] Ratings for Switching C Motors (C / C / C) kw (5 Hz) UL/CS HP (6 Hz) uxiliary
TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N
![TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N](/thumbs/84/91187989.jpg "TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N")
TEL:-3349 FAX:-332E-MAIL: szss@3.com FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FBR2 SERIES FEATURES (FOR SIGNAL APPLICATIONS)
VSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) VSB SERIES FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
Mini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks
Mini Contactors Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks Interface Contactor Relays Mini Contactors 10 Auxiliary Contact Blocks Mini Contactors With Fast On Tab Connectors 12 Mini Contactors
Champion Ignition Exciter Model CH92133 Competitive Analysis
The Champion Aerospace Ignition Exciter Assembly, Model CH92133 is eligible by FAA-PMA for use on the Rolls-Royce Model 250 Series I, II, III & IV turbine engines as approved for replacement of the following
Vacuum interrupters Introduction
54 JENNINGS TECHNOLOGY Vacuum interrupters Introduction Design Jennings vacuum interrupters feature an evacuated ceramic insulating envelope surrounding two contacts, one fixed and one movable. The movable
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.
MAGNETIC-LATCHING DC-8 GHz TO-5 RELAYS 4PST
MagneticLatching Electromechanical Relay MAGNETICLATCHING DC8 GHz TO5 RELAYS PST SERIES SGRF SGRFD RELAY TYPE PST RF Relay PST RF Relay with internal diodes for coil transient suppression DESCRIPTION The
3.0 CHARACTERISTICS. Type CKO Overcurrent Relay. switch, which allows the operation indicator target to drop.
41-101.3A Type CKO Overcurrent Relay switch, which allows the operation indicator target to drop. The front spring, in addition to holding the target, provides restraint for the armature and thus controls
2 PDT Coil supply. Contacts rated at. Contact rating per pole and load type. Load Current in 100,000 cycles 100,000 cycles
ENGINEERING DATA SHEET GP250 RELAY - LATCH 2 PDT, 2 AMP Polarized, latching hermetically sealed relay Contact arrangement 2 PDT Coil supply Direct current Qualified to SCC3602/010 PRINCIPLE TECHNICAL CHARACTERISTICS
Elgar SmartWave Series VA V A. High Performance AC/DC Power Source. and Boeing standards
Elgar SmartWave Series High Performance AC/DC Power Source and Boeing standards 1750 22200 VA 156 312 V 6.5 192 A 208 230 400 230 The Elgar SmartWave (SW) Series of AC power sources offers powerful waveform
Digital Interface Card DEC005000
Engineering & Manufacturing Solutions Digital Interface Card DEC005000 APPLICATION: The DEC005000 conveniently interfaces industry standard signals 4-20mA, 0-5V or 0-10V with a proportional solenoid valve
Aegis Power Systems, Inc., P.O. Box 429, 805 Greenlawn Road, Murphy, NC Tel: (828) Table 1: Maximum Ratings
Aegis Power Systems, Inc., P.O. Box 429, 805 Greenlawn Road, Murphy, NC 28906 Tel: (828) 837-4029 www.aegispower.com 300E DC-DC Power Converter (Document Rev A03, 09/01/2015) High Voltage 300Vdc Input
Series HR422/ HRS422 DC up to 1 GHz Magnetic Latching Space Grade DPDT Relay
PART NUMBER HR422 DESCRIPTION Magnetic-Latching, DPDT, TO-5 Space Grade Relay (HIREL) HRS422 Magnetic-Latching, DPDT, TO-5 Space Grade Relay (HIREL), Surface Mount J-Leads Teledyne Relays HR/HRS422 Series
VISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective Approved By A 11/11/13 Specification Release S. Sadot A1 14/01/14 Update ope
Electrical Specification for: Compact PCI - 6U - AC - 700W Telkoor Part Number: 900-7802-0000 SCALE RELEASE DATE 11/11/13 SHEET 1 OF 7 VISION HISTORY Rev Level Rev Date Change Made Reason for Change Effective
Industrial PSU with universal input voltage range ( VAC line to line) and configurable output voltage. North America
World-Wide 3-phase Input Voltage Range (nom. 200 Vrms to 480 Vrms), PF > 0.94 High Power Density 16 W/in 3 94% Typical Efficiency Parallel Operation up to 16 Units (50.4 kw) Cold-Plate Cooling System -25
Series HR255/HR257 DC up to 3 GHz Magnetic Latching Space Grade DPDT Relay
PART NUMBER HR255, HR257 DESCRIPTION Magnetic-Latching, DPDT, Half-Size Crystal Can, Space Grade Relay (HIREL) Teledyne Relays HR255/257 Series relay is a High Reliability Off-The Shelf (COTS) relay suitable
CX-Series. Circuit Breaker
CX-Series Circuit Breaker The CX-Series circuit breaker features a unique and innovative arc-quenching configuration that allows the breaker to safely handle high amperage and high DC voltage applications
Technical Information General Purpose Relays
Glossary CONTACTS Contact Form The contact mechanism of the Relay. Number of Contact Poles The number of contact circuits. Rated Load The rated load of the contact of the Relay, which determines the characteristic
High Reliability, DC Solid State Relay
High Reliability, DC Solid State Relay esigned for the highest levels of reliability, the Cole R-series D Solid State Relay has no moving parts, making it immune to all contact related problems such as
GPS-TMG-50N, 50 db Internal Amplifier
GPS/Aviation Special Purpose s GPS Timing Reference s GPS-TMG-50N, 50 db Internal Amplifier The GPS-TMG-50N timing reference antennas are specifically designed for long-lasting, trouble-free deployments
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. POWER RELAY 1 POLE 3,, 1 A FBR16 SERIES FEATURES Compact with high power (3
Micro Contactors. Micro Contactor Relays 10. Micro Contactors 11. Micro Contactors With Solder Pins 12. Coil voltages 12. Micro Reversing Contactor 13
Micro Contactor Relays 10 Micro Contactors 11 Micro Contactors With Solder Pins 12 Coil voltages 12 Micro Reversing Contactor 13 Technical Data 14 Dimensions 18 D946E 9 Micro Contactor Relays 4-pole AC
FBR211 SERIES 1 POLE MINIATURE RELAY. 1 to 2 A (FOR SIGNAL SWITCHING) 1 to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS)
MINIATURE RELAY POLE FBR2 SERIES to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS) 2 A maximum carrying current Capable of 2 A maximum continuous carrying
Series HR412K/ HRS412K DC up to 1 GHz, High Shock Non-Latching Space Grade DPDT Relay
Series HR412K/ HRS412K PART NUMBER HR412K HRS412K DESCRIPTION Non-Latching, DPDT, TO-5 Space Grade Relay (HIREL), High Shock Non-Latching, DPDT, TO-5 Space Grade Relay (HIREL), High Shock, Surface Mount
Dual Reversing Module
Dual Reversing Module Introduction The E-Plex 425DRM has been designed to simplify wiring in electronic systems by providing the reversing function local to the motor devices thus eliminating long cable
J Series. Rectifier Module. Overview. Features
J Series Rectifier Module Overview Eltek rectifier modules provide industry-leading power density and efficiency in 1 or 2 RU footprints. With a wide range of power ratings and form factors, there is an
These power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
Nuclear Qualified Control Relays Series EGP/EML/ETR
4/24/2002 dition Nuclear Qualified Control Relays Series GP/ML/TR SISMIC AND RADIATION TSTD In order to satisfy the growing need for electrical control components suitable for class 1 service in nuclear
SURFACE MOUNT HIGH REPEATABILITY SPDT, BROADBAND 16 GHZ 40GBPS MAGNETIC-LATCHING RF RELAY
SURFACE MOUNT HIGH REPEATABILITY SPDT, BROADBAND 16 GHZ 40GBPS MAGNETIC-LATCHING RF RELAY Series GRF121 SERIES GRF121 RELAY TYPE RF Magnetic-Latching, SPDT, Surface Mount Relay DESCRIPTION The ultraminiature
Potentiometer Control EC20200
Engineering & Manufacturing Solutions Potentiometer Control EC20200 APPLICATION: Proportionally control the speed of hydraulic motors and cylinders. ISO 9001:2008 WITH DESIGN Certificate #02.002.1 Features
Kinetix 300 Drive (single-phase and three-phase) Power Specifications
Chapter 4 Kinetix 3 EtherNet/IP Indexing Servo Drives Kinetix 3 Drive (single-phase and three-phase) Power Specifications Attribute 297-V33PR1 297-V33PR3 297-V33PR5 297-V33PR6 AC input voltage AC input
Catalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009
Catalog 00 Contactors up to 5 A Motor Starters up to 55 kw 03/009 Kraus & Naimer The development of the Blue Line rotary switch, contactor and motor starter product ranges is based on more than hundred
GFM DC-DC Converter. Preliminary 8 to 50 Volt Input 30 Watt High Efficiency. MIL-STD Pedigree. Exceptional Value. PRELIMINARY
Features High reliability Typical efficiency 90% or greater Up to 30 watts -55 C to +105 C operation Wide 8 to 50 volt input Inhibit and sync functions Assembled in a MIL-PRF-38534 certified facility GFM
PMT/UMT(275) Power Gap Description and Use Application Note
Application Note Introduction The PMT(275)/UMT(275) Series has been designed for use in applications where a rugged miniature sized surge arrester is needed capable of high speed of response. This Power
19-56 Volt input 35 Watt Space qualified
Features Radiation tolerant space DC-DC converter -- Single event effects (SEE) LET performance to 86 MeV cm 2 /mg -- Total ionizing dose (TID) guaranteed per MIL-STD-883 method 1019, radiation hardness