MAGTROL. KLB Wedge socket. KLB/KLE/KLU Data Sheet SYSTEM CONFIGURATION
|
|
- Sophia Freeman
- 5 years ago
- Views:
Transcription
1 Data Sheet KLB Wedge socket Features Mechanical system suitable for measuring for measuring forces between 20 and 160 kn Specially designed for lifting applications in fixed point High reliability for strict safety requirements Versions with or without integrated electronic 4-20 ma (KLE) or 0-10V (KLU) IP 66 Protection class Available in 6 standards ranges for cable diameter of 11 to 28 mm description The Magtrol wedge sockets are used on fixed point to measure load and forces and provide overload protection.this electrical signal is proportional to the applied force. Because the transducer is rugged with resistance stainless steel, it is insensitive to external mechanical and chemical effects making them ideal for use in harsh environmental conditions. applications KLB - 20 kn The KLB series is perfectly suited for hoisting and crane security in combination with a Magtrol LMU Load Monitoring Unit or AN Series Load Monitor/Signal Conditioner/Display. SYSTEM CONFIGURATION LMU Load Monitoring Unit Strain Gauge Amplifier KLB ( WEDGE SOCKET ) AN Load Monitor 4-20 ma SPS GAC KLU/KLE ( WEDGE SOCKET ) AN Load Monitor 1
2 Technical Ratings - KLB series Type KLB 281 KLB 282 KLB 283 KLB 284 KLB 285 KLB 286 dimensions (A) P T P 65 B Dimensions (mm) ØD G Size (inch) Nominal Load A B C ØD E F G P T C 1/2 20 kn F CE 5/8 40 kn /4 50 kn /8 80 kn kn /8 160 kn
3 Technical Ratings - KLE series Type KLE 281 KLE 282 KLE 283 KLE 284 KLE 285 KLE 286 CEM According to EN & EN category B Output Signal Rated 4 to 20 ma; max. 3.5 to 25 ma Configuration 2 wires Load Resistance Admissible resistance of the 2-wire circuit at the connection of the Wedge socket 28x 1500 Hatched Operating Domain = Load Resistance Supply Voltage U a R L R L [Ω] ma 4 ma U a [V ] 3
4 Technical Ratings - KLU series Type KLU 281 KLU 282 KLU 283 KLU 284 KLU 285 KLU 286 CEM According to EN & EN category B Output Signal Rated 4 to 20 ma; max. 3.5 to 25 ma Configuration 4 wires 4
5 Ordering Information OPTIONS AND ORDERING INFORMATION MODELES STANDARD KL / 01X Model KLB standard Model KLE (4-20 ma, 2 wires) Model KLU (0-10 V, 4 wires) Size 1/2 20 kn 281 Size 5/8 40 kn 282 Size 3/4 50 kn 283 Size 7/8 80 kn 284 Size kn 285 Size 1 1/8 160 kn 286 AccessorIes Cable Assemblies Axial Connection between Load Measuring Pin and LMU Accessory Ordering Information Straight Connector» 60 mm (» 2.36 in)» 82 mm (» 3.23 in) COUNTER-CONNECTOR Straight Connector P/N Connector P/N Radial Connection between Load Measuring Pin and LMU Pin Configuration 90 Connector» 58 mm (» 2.28 in) CABLE ASSEMBLY Part Number EH 13 / 0 1 Straight Connector 8 90 Connector 9 Supply + Supply - Signal + Signal - : red : blue : white : green A B C D B F A D C E CABLE ASSEMBLY Cable Length: 3 m 1 6 m 2 12 m 3 20 m 4 Shield : black Due to the continual development of our products, we reserve the right to modify specifications without forewarning. Instr strument mentation tion for Science and a Industry try ISI sa-nv Rue du Doyenné Brussels Tel +32 (0) Fax 02/ web : mail : sales@isi-be.com
MAGTROL. KLB Wedge socket. KLB/KLE/KLU Data Sheet SYSTEM CONFIGURATION
Data Sheet KLB Wedge socket Features Mechanical system suitable for measuring for measuring forces between 20 and 160 kn Specially designed for lifting applications in fixed point High reliability for
More informationLOAD MEASURING PINS LE-LU SERIES FEATURES DESCRIPTION APPLICATIONS
LE-LU SERIES LOAD MEASURING PINS Magtrol offers a wide range of Load-Force-Weight Transducers with optional integrated electronics or Load Monitoring Units (LMU) with B.I.T.E. functions creating an ideal
More informationLB-LE-LU SERIES USER GUIDE LOAD MEASURING PINS.
LB-LE-LU SERIES LOAD MEASURING PINS USER GUIDE 01 LB-LE-LU series While every precaution has been exercised in the compilation of this document to ensure the accuracy of its contents, Magtrol assumes no
More informationISENSE DATA SHEET. strument
ISENSE DATA SHEET Instr strument mentation tion for Science and a Industry try ISI sa-nv Rue du Doyenné 3-1180 Brussels Tel +32 (0) 2 343 30 81 Fax 02/ 343 12 05 web : http:// www.isi-be.com mail : sales@isi-be.com
More informationOutdoor microphone kit for SVANTEK SLM Short User Guide
Outdoor microphone kit for SVANTEK SLM Short User Guide Warsaw, September 2008 Instr strument mentation tion for Science and a Industry try ISI sa-nv Rue du Doyenné 3-1180 Brussels Tel +32 (0) 2 343 30
More informationMAGTROL. LMU 112 and LMU 117 Load Monitoring Units. LMU 112 / LMU 117 Data Sheet LMU 112 FEATURES LMU 117 FEATURES DESCRIPTION SYSTEM CONFIGURATION
Data Sheet LMU 112 and LMU 117 Load Monitoring Units LMU 112 FEATURES For Use with Full-bridge Strain Gauge Transducers (Sensitivity 0.5 to 2 mv/v) Voltage Input for Different Charge Summation 2 Level
More informationKraus Messtechnik GmbH
Kraus Messtechnik GmbH MT32 Mini Mini multi channel telemetry system for rotating and point to point application Up to 32 channels 12 bit resolution, simultaneous sampling of all channels Anti aliasing
More informationMAGTROL. LMU 116 Load Monitoring Unit. LMU 116 Data Sheet FEATURES DESCRIPTION SYSTEM CONFIGURATION
Data Sheet Load Monitoring Unit FEATURES For Use with Full-bridge Strain Gauge Transducers (Sensitivity 0.5 to 2 mv/v) Voltage Input for Different Charge Summation Summer with 4 Inputs Taring Facility
More informationMAGTROL. LMU Series Load Monitoring Units. LMU Data Sheet. Description. Features
MAGTROL Data Sheet Series Load Monitoring Units Features For use with full-bridge strain gauge transducers (sensitivity 0.5 to 4 mv/v) Voltage input for load summation or for individual use (without sensor)
More informationForce and weight measuring instruments
JJ Force sensors and load cells JJ Hanging scales JJ Sensors for proof load testing JJ Water filled bags Force and weight measuring instruments DS_Force_and_weight_measuring_instruments 05/2016 97 Force
More informationCable transducer Analog output / redundant Measuring length absolute up to 5 m
Features Magnetic sensing method Resolution: 12 bit Interface analog 0...10 V / 0.. V /...20 ma Measuring length up to m Removable stickers for water outlet Teach inputs Extremely light thanks to housing
More informationSafety Angle Transducer Type Series Potentiometric, active
Special features Potentiometric measuring principle with conductive plastic resistance track and integrated signal amplifier Redundant design for safety relevant applications available Extremely rugged
More informationOperating Instructions
Operating Instructions Torque Transducer Type CD9515 Series Please read instruction carefully. Important Advice: The torque transducers of type CD9515 are suitable for applications in laboratories (for
More informationTension/compression force transducer. With thin film technology up to 100 kn. Models F2301, F23C1, F23S1. Force. Applications.
Force Tension/compression force transducer With thin film technology up to 100 kn Models F2301, F23C1, F23S1 tecsis data sheet FO 51.17 Applications Crane systems and hoists Industrial weighing technology
More informationABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL
Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull Œ Short circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096
More informationMagnetic Inductive Flow Sensors VMI Series
Magnetic Inductive Flow Sensors VMI Series SIKA Dr.Siebert & Kühn GmbH & Co. KG Struthweg 7 9 34260 Kaufungen Germany.: +49 5605 803-0 Fax: +49 5605 803-54 e-mail: info@sika.net www.sika.net Magnetic Inductive
More informationTechnical data Model F1301 F13C1 ATEX/IECEX 2) F13C1 (Option) Nominal load F nom 10 / 20 / 30 / 50 / 100 / 200 kn 10 / 20 / 30 / 50 / 100 / 200 kn 10
Compression force transducer with Thin-film sensor Accuracy: 1 % Output signal: 4...20 ma; 2-wire, 0...10 VDC; 3-wire Optional Optional ATEX/IECEX II 2G Ex ib IIC T4/T3 for SIL3-Applications with 2-channel
More informationAcceleration Sensor AS - 022
1 Application Acceleration Sensor AS - 022 The acceleration sensor AS-022 is used for measurement of vibration acceleration. Fig. 1 Acceleration Sensor AS - 022 2 Measuring Principle 3 Technical Data Acceleration
More informationS9M. Force Transducer. Special features. Data sheet
S9 Force Transducer Special features - Tensile/compressive force transducer - ccuracy class 0.02 - Hermetically encapsulated (IP68) - Rust-resistant materials - vailable in different cable lengths and
More informationHeavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e
Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is
More informationTension/compression force transducer. With thin film technology up to 100 kn. Models F2301, F23C1, F23S1. Force. Applications.
Force Tension/compression force transducer With thin film technology up to 100 kn Models F2301, F23C1, F23S1 WIKA data sheet FO 51.17 Applications Crane systems and hoists Industrial weighing technology
More informationC10. Data sheet. Force transducer. Special features. B de
C10 Force transducer Data sheet Special features Force transducer for static and dynamic applications Made of non-rusting materials Precise (accuracy class from 0.03) Numerous options (double bridge, TEDS,
More informationU9C. Data sheet. Force Transducer. Special features. B en
U9C Force Transducer Data sheet Special features Tensile/compressive force transducer Accuracy class 0.2 Nominal (rated) forces 50 N 50 KN Non-rusting, protection class IP67 Configurable with different
More informationC9C. Force Transducer. Special features. Data sheet
C9C Force Transducer Special features - Compact design compressive force transducer - Accuracy class 0.2 - Nominal (rated) forces 50 N to 50 kn - Configurable with different cable lengths, plug assembly
More informationTemposonics. Magnetostrictive Linear Position Sensors. EH Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EH Analog High pressure resistant sensor rod Position measurement with more than one magnet Small & compact Ideal for standard hydraulic cylinders MEASURING
More informationModel 140 Inline Amplifier
Model 140 Inline Amplifier Low Noise Inline Amplifier Small Rugged Package Includes Auto-Zero Function The Model 140 is a remote in-line DC amplifier designed to be used with bridgetype mv output transducers.
More informationTECHNICAL DATASHEET #TDAX A DC MOTOR CONTROLLER P/N: AX Variable Speed Control, Onboard I/O CAN SAE J1939, Rugged Packaging
TECHNICAL DATASHEET #TDAX102000 35A DC MOTOR CONTROLLER P/N: AX102000 Variable Speed Control, Onboard I/O CAN SAE J1939, Rugged Packaging with Electronic Assistant Features: Unidirectional or bi-directional
More informationMAGTROL. DI Series Displacement Transducers. DI Data Sheet. Features
ata Sheet Series isplacement Transducers Features Large measuring range: Piston displacements from 50 to 1000 mm; 80 to 250 mm for 63X models urrent-based output signal (4 to 20 ma) for displacement uilt-in
More informationENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:
ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog
More informationProtection class IP67/IP69K Magnetic measurement principle
POSITILT PTAS2 Magnetic inclination sensor with analog output Magnetic inclination sensor in a 36 mm housing Protection class IP67/IP69K Magnetic measurement principle Outputs: Voltage 0.5... 4.5 V; 0.5...
More informationIncremental Encoder Model: FOI58
Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85
More informationU10M. Force Transducer. Special features. Data sheet. Mounting dimensions of the connection variants in mm [inch]
U10M Force Transducer Special features - Precise and robust tensile/compressive force transducer for static and dynamic measurement tasks - High lateral force and bending moment stability, the effect of
More informationU15. Force transducer. Special features. Data sheet. Installed dimensions of connection variants
U15 Force transducer Special features - Tensile/compressive force transducer - Nominal (rated) forces 2.5 kn to 2.5 MN - lass 0.5 to ISO 376 in force measurement range between 10% and 100% of the nominal
More informationPOSIROT. PRAS3EX Magnetic Angle Sensor. Magnetic Angle Sensors (Dust-Ex-proof) Datasheet
Magnetic Angle Sensors (Dust-Ex-proof) Magnetic Angle Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of
More informationTSC 401 Torque/Speed Conditioner
TSC 0 Torque/Speed Conditioner.0 Connection Speed Cable Torque Cable (dynamometer loadcell) MAGTROL SA SWITZERLAND TORQUE SPEED CONDITIONER Type : TSC 0 P/N : -0-000-0 S/N : Kit -0-000-x matched with xwbxxx
More informationXPC10 High temperature miniature pressure sensor
Absolute, sealed and gauge ranges 10 to 500 bar [150 to 7 500 psi] High temp. operation from -40 up to 220 ºC [-40 to 428 F] Stainless steel construction Amplified output available For static and dynamic
More informationAero Support Ltd, 70 Weydon Hill Road, Farnham, Surrey, GU9 8NY, U.K.
4-170 Piezoelectric Accelerometer The CEC 4-170 accelerometer is a self-generating, piezoelectric accelerometer designed for medium temperature vibration measurement applications. This instrument provides
More informationT22. Torque transducer. Special features. Data sheet
T22 Torque transducer Special features - Nominal (rated) torques 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, Nm, Nm, 50 Nm, 0 Nm, 0 Nm, 500 Nm and 1 knm - Nominal (rated) rotational speed up to 000 rpm (depending on measuring
More informationMX1615B-R. Ultra-rugged Bridge Amplifier. Special features. Data sheet. Block diagram
MX1615B-R Ultra-rugged Bridge Amplifier Special features - 16 individually configurable inputs - Connection of strain gages in half-, full- or quarter-bridge (120 Ohm or 350 Ohm) - Bridge excitation: DC
More informationLinear Variable Differential Transformers Precision instruments for displacement measurement
Linear Variable Differential Transformers Precision instruments for displacement measurement LVDTs provide simple, cost-effective solutions whenever you need accurate and precise measurement of linear
More informationTemposonics. Magnetostrictive Linear Position Sensors. ER Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors ER Analog Compact sensor model Operating temperature up to +75 C (+167 F) Ideal for flexible mounting MEASURING TECHNOLOGY The absolute, linear position
More informationDigital flow ELEMENT transmitter for continuous flow measurement
Digital flow ELEMENT transmitter for continuous flow measurement Type 8036 can be combined with... DN06 to DN65 fluidic process connection Programmable outputs : one or two transistor output(s) and single
More informationOperating Manual Series Load Pins
Operating Manual 5301 Series Load Pins Safety note Use for intended purpose The force transducers in model series F5301 are intended for the measurement of static and dynamic tensile or compressive force.
More informationTemposonics. Magnetostrictive Linear Position Sensors. EH IO-Link Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EH IO-Link High pressure resistant sensor rod Operating temperature up to +75 C (+167 F) Small & compact Ideal for standard hydraulic cylinders MEASURING
More informationModel LBS Miniature Compression Load Button
Model LBS Miniature Compression Load Button Why the Interface model LBS Miniature Compression Load Button is the best in class: Temperature compensated Integral load button Small diameter From." height
More informationABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
More informationDigital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
More informationTemposonics. Magnetostrictive Linear Position Sensors. EP / EL Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EP / EL Analog For standard applications Position measurement with more than one magnet Ideal for limited installation space MEASURING TECHNOLOGY The
More informationResistance thermometer Model TR31, miniature design
Electrical temperature measurement Resistance thermometer Model TR31, miniature design WIKA data sheet TE 60.31 Applications Machine building, plant and vessel construction Propulsion technology, hydraulics
More informationIncremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
More informationXXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More informationBenefits/Application. Class 00 according to ISO 376 in the range 10 % to 100 % Especially to trace back Force Standard Machines
Data sheet Force transfer standard Series KTN-Z/D (5 N 1000 kn) Benefits/Application Class 00 according to ISO 376 in the range 10 % to 100 % For static tensile and compressive forces Especially to trace
More informationK3D60a ±100N. Description. The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes.
K3D60a ±100N Description The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes. The new 3-axis sensor K3D60a is a further development of the series K3D60 and
More informationTorque Measuring Flange
Force Torque Measuring Flange Digital Telemetry Based, Short-Design, Robust, High Accuracy Type 025DF... Type 025DF... torque measuring flanges operate on the strain gage principle. The integral, digital
More informationOEM pressure sensor For industrial applications Models O-10 (T), O-10 (5)
Pressure OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 for further approvals see page 11 Applications Hydraulics and pneumatics Pumps and compressors
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog
NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors,
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 205-S ULTRASTAB I PN = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature
More informationProtection class IP67/IP69K Magnetic measurement principle
POSITILT PTAS2 Magnetic inclination sensor with analog output Magnetic inclination sensor in a 36 mm housing Protection class IP67/IP69K Magnetic measurement principle Outputs: Voltage 0.5... 4.5 V; 0.5...
More informationMiniature resistance thermometer Model TR33, thread-mounted
Electrical temperature measurement Miniature resistance thermometer Model TR33, thread-mounted WIKA data sheet TE 60.33 Applications Machine building, plant and vessel construction Propulsion technology,
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More informationABSOLUTE ROTARY ENCODER DEVICE NET
Main Features - Compact and heavy-duty industrial model - Interface: CAN according to Device Net - Housing: 8 mm - Shaft: 6 or 0 mm - Resolution: Max. 2 Bit =,,2 steps over,096 revolutions - Code: Binary
More informationIP65 Splash and Dust Proof Stepping Motors
IP5 Splash and Dust Proof Stepping Motors CE/UL Model Features These IP5 rated motors* have superior water and dust resistance, and can be safely utilized in harsh or wet environments such as in food processing
More informationLoad pin With thin-film technology up to 70 kn Models F5301, F53C1, F53S1
Force Load pin With thin-film technology up to 70 kn Models F5301, F53C1, F53S1 tecsis data sheet FO 51.18 Applications Crane systems and hoists Industrial weighing technology Machine building and plant
More informationLVDT. Inductive Position Transducer - Hydraulic Series. SM-HYD-F18 Hydraulic-Series. Key-Features:
LVDT Inductive Position Transducer - Hydraulic Series SM-HYD-F18 Hydraulic-Series Key-Features: Content: - M18x1,5 mm integral thread - Operating pressure 150 bar - Ranges 2...200 mm - Linearity up to
More informationOEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)
Electronic pressure measurement OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 Applications Hydraulics and pneumatics Pumps and compressors
More informationTM 300 Series. In-Line Torque Transducers. User s Manual
TM 300 Series In-Line Torque Transducers User s Manual Purchase Record Please record all model numbers and serial numbers of your Magtrol equipment, along with the general purchase information. The model
More informationEncoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
More informationEMSPA LINEAR MAGNETOSTRICTIVE TRANSDUCER WITH ANALOG OUTPUT. Magnetostrictive transducer. Main characteristics. Ordering code EMSPA 1000 S 10S 10 P A
EMSP LINER MGNETOSTRICTIVE TRNSDUCER WITH NLOG OUTPUT Main characteristics EMSP is an absolute linear magnetostrictive transducer with analog interface.thanks to the absence of electric contact on the
More informationU2B. Force Transducer. Special features. Data sheet
U2B Force Transducer Special features - Tensile/compressive force transducer - Non rusting, degree of protection IP67 - Can be configured with different cable lengths, plug fitting and TEDS on request
More informationTorque Sensor. Torque. with Dual-Range-Option. Type 4503A...
Torque Torque Sensor with Dual-Range-Option Type 4503A... Type 4503A... torque sensors with built-in speed sensor operate on the strain gage principle. An integral, digital measurement conditioning system
More informationIXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.
IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration
More informationIndustrial Applications
Model: Industrial Applications Product Name: Smart Receiver (Mk2) RoHS Compliant Product Code: SR2 The sr-2 is the second generation of the Hanwell Smart Receiver. It is a network enabled receiver, designed
More informationHigh Performance Current Transducer IT 200-S ULTRASTAB = A. ε L
High Performance Current Transducer IT 200-S ULTRASTAB For the electronic measurement of currents: DC, AC, pulsed..., with galvanic isolation between the primary circuit and the secondary circuit. I PM
More informationTorque Sensor. Torque. Dual-Range Sensor with Brushless Transmission. Type 4503A...
Torque Torque Sensor Dual-Range Sensor with Brushless Transmission Type 4503A... Type 4503A... torque sensors with built-in speed sensor operate on the strain gage principle. An integral, digital measurement
More informationDigital conductivity transmitter
Digital conductivity transmitter Compact version with integrated conductivity electrodes Remote version with seperated transmitter for short (15 ft.) or long (1500 ft.) distance Commissioning is easy due
More informationSIGNAL CONVERTER I/V AND I/I CST 113
INSTRUCTION MANUAL SIGNAL CONVERTER I/V AND I/I P/N 623.005 E ( MACST113-01/E ) Copyright Magtrol SA, 1997 All rights reserved Published and printed by Magtrol SA in Fribourg, Switzerland The information
More informationTPFADA FLUSH DIAPHRAGM PRESSURE TRANSMITTER WITH DIGITAL AUTOZERO & SPAN
TECHNICAL DATA TPFADA FLUSH DIAPHRAGM PRESSURE TRANSMITTER WITH DIGITAL AUTOZERO & SPAN Main features Ranges: from 0...10 to 0...1000 bar Output signal 4...0mA -wires / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 200-S ULTRASTAB I PM = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)
More informationn Measuring range ,02 N m to N m n Clockwise and counter-clockwise torque n Low linearity deviation of ± 0.05 % F.S.
Precision Torque Sensor Non-contact transmission for rotating applications Optional measurement of angle and speed Model 8661 Code: Delivery: Warranty: 2-3 weeks 24 months Application The 8661 precision
More informationU2B. Data sheet. Force Transducer. Special features. B en
U2B Force Transducer Special features Data sheet Tensile/compressive force transducer Non-rusting, degree of protection IP67 Can be configured with different cable lengths, plug fitting and TEDS on request
More informationMagnetic Inductive Flow Sensors induq. Series VMI
Magnetic Inductive Flow Sensors induq Series VMI Free Flow! Compact - cost-effective - robust! The induq from SIKA is a trio of extremly compact, low cost, magnetic inductive fl ow sensors. This new product
More informationma output signal with transmitter module. - Adjustable frequency output signal with pulse divider module
/ - ; 0 PSI Advantages / Benefits Wireless easy mounting and dismounting of sensor head by a Turn & Lock technique 3-wire Hall version to interface directly with PLC's (both NPN and PNP) Easy to connect:
More informationSensors for Small Forces
Force Sensors for Small Forces 0,5... 0,5 N to 500... 500 N Type 9203, 9205, 9207, 9215A, 9217A These slim sensors are designed for dynamic and quasistatic tensile and compression forces. Depending on
More informationPV 102. IECEx. Piezoelectric velocity sensor FEATURES. From the Vibro-Meter product line
FEATURES From the Vibro-Meter product line Designed for medium temperature industrial applications: 50 to +120 C ( 58 to +248 F) Frequency response: 6.0 to 2500 Hz: ±10 % to 5000 Hz: ±3 db Ultra low-noise
More informationOperating manual. Force transducer with strain gage measuring system C9B. A en. hvordan man bruger astrologi med tibetanske medicin
Operating manual Force transducer with strain gage measuring system C9B hvordan man bruger astrologi med tibetanske medicin C9B Contents 3 Page Safety instructions..............................................
More informationOEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted
Electrical temperature measurement OEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted WIKA data sheet TE 60.31 Applications Machine building, plant and vessel construction Propulsion
More informationMX1601B-R. Ultra rugged Standard Amplifier. Data sheet. Special features. Block diagram
MX1601B-R Ultra rugged Standard Amplifier Special features - 16 individually configurable inputs (electrically isolated) - Support of 60 V, 10 V, 100 mv, 20 ma or IEPE on all channels - Sample rate: up
More informationElectronic temperature switch with display Model TSD-30
Electrical temperature measurement Electronic temperature switch with display Model TSD-30 WIKA data sheet TE 67.03 Applications Machine tools Hydraulic power packs Coolant and lubrication systems Machine
More informationRG Connector (Molded Mating Extension Cable Required) A H B G. MS Connector (Mating Connector: P/N ; MS3116F-12-10S or Extension Cable)
T E M P O S O N I C S L S E R I E S INSTALLATION A N A L O G O U T P U T 550570 B W I R I N G - A N A L O G O U T P U T S RG Connector: (Voltage or Current Output) 1 Gray 0 to 10 Vdc, 4 to 20 ma, or 0
More informationDATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
More informationLoad pin With thin-film technology up to 70 kn Models F5301, F53C1, F53S1
Force Load pin With thin-film technology up to 70 kn Models F5301, F53C1, F53S1 WIKA data sheet FO 51.18 Applications Crane systems and hoists Industrial weighing technology Machine building and plant
More informationPressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 605-S ULTRASTAB I PN = 600 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature
More informationTemposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors GB-M / GB-T Analog Sensor element and electronics can be changed Flat & compact sensor electronics housing Electrical connection is freely rotatable
More informationIncremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
More informationph or ORP Transmitter
ph or ORP Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlighted display Universal process connection Compatible with 120 mm ph/ ORP probes
More informationTemposonics. E-Series Model ER. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. Analog and Start/Stop Outputs.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors Analog and Start/Stop Outputs SENSORS Document Part Number: 550996 Revision E Data Sheet FEATURES Linear, Absolute Measurement
More informationLoad pin Heavy Duty with thin film technology from 10 kn Models F5308, F53C8, F53S1
Force Load pin Heavy Duty with thin film technology from 10 kn Models F5308, F53C8, F53S1 tecsis data sheet FO 51.43 Applications Crane systems, hoists, offshore Industrial weighing technology Machine
More informationT10FS. Data Sheet. Torque Flange. Special features. Installation example T10FS. B en
T10FS Torque Flange Data Sheet Special features Nominal (rated) torques: 100 NVm, 200 NVm, 500 NVm, 1 knvm, 2 knvm, 3 knvm, 5 knvm, 10 knvm Nominal speed from 12,000 rpm to 24,000 rpm Low rotor weights
More informationLVDT 提夫自控技术 ( 上海 ) 有限公司. Series SL ø 20 mm. Inductive Position Transducer. ranges mm. linearity up to 0,20 % housing ø 20 mm
提夫自控技术 ( 上海 ) 有限公司 LVDT Inductive Position Transducer Series SL ø 20 mm ranges 25...600 mm linearity up to 0,20 % housing ø 20 mm output: AC, 0...10 V, 0...5 V, 4...20 ma, 0...20 ma, ±10 V, ±5 V with external
More information