NUMERIK JENA LIK 21 LIK 22 LIK 23. Exposed Linear Encoders compact model range
|
|
|
- Pierce Morton
- 5 years ago
- Views:
Transcription
1 NUMERIK JENA LIK 21 LIK 22 LIK 2 Exposed Linear Encoders compact model range
2 Exposed Linear Encoders- compact model range LIK 21 LIK 22 LIK 2 Extremly small dimensions of scanning head for crowded installation conditions High insensitivity to contamination of s due to two optical sensors in the scanning head High resolution and accuracy High interpolation accuracy due to electronic offsetcompensation Signal processing in the D-Sub-connector Integrated signal interpolation up to 100x in the connector Optional with installation LED Wide mounting tolerances Defined thermal behavior of the DOUBLEFLEX Mechanical decoupled DOUBLEFLEX Simple mounting of the s because of double-side adhesive tapes Technical data LIK 21 LIK 22 LIK 2 M echanical data Scanning head dimensions [mm] 0 x 11 x 6 40 x 11 x 7 2 x 11 x 9, Weight of scanning head (without cable).2 g. g.0 g Recommended resolution Travel speed - without interpolation (maximum) 600 m/min resp. 10 m/ s - with 0x interpolation (maximum) 96 m/min resp. 1.6 m/ s Measuring length Scale tape 0.0 µm; 0.1 µm; 0.2 µm; 0, µm; 1.0 µm;.0 µ m up to 0 m - Material steel - Grating period (GP) 20 µm standar d - Reference marks - periodically every 0 mm, starting from the middle of the - distance coded at 1000 x GP - at the center of the measuring lenght - others on request Linear expansion coefficient - DOUBLEFLEX x 10 deg - SINGELFLEX- as function of material of the mounting surface Accuracy classes - DOUBLEFLEX- ±1 µm; ±2 µm; ± µm; ± µ m - SINGELFLEX- ± µm; other on request Electrical data Ambient conditions Scanning frequenc y Output interfaces and connectors Voltage output Square wave output (RS 422) max. 00 khz S upply voltage V DC ±10% Power consumption Voltage output Square wave output Cable lengths Cable permanently connected to the scanning head Permissible total cable length (with extension cable) Cables`permissible bending radius Operating temperature range Storage temperature range Vibration (0Hz Shock (11ms) Hz) 1V pp / 1 pin D-Sub-connecto r RS 422 with interpolation up to 0x / 1pin D-Sub-connecto r 1 2) ; 100mA 1 2) ; 220 ma 1 )...without installation-led ; 2)...with installation-le D ) 80 ma ) 200 ma up to m (standard lengths: 0. m; 0. m; 1 m; 1, m; 2 m; m) max. 100 m with extension cable bent once: 8 mm moving constantly: 40 mm 0 C... C -20 C C ms ms - 1 -
3 Dimensions and installation conditions LIK F Connecting cable Mounting surface 6± ± /8 DOUBLEFLEX Scanning side scanning head Bonding surface Bonding pad ±0.1 H± F M 1.±0.1 Specification of H ± 0.1 SINGLEFLEX 1.1 DOUBLEFLEX 1. Ø ±0.1 0 F... Machine guideway The mounting surface must be vertically adjustable to ensure the distance paramater and the parallelism. Allocation of scanning head, and LIK 21 (14,) (8,2) (14) Positive counting direction Measuring length ML End of Start of Maximum overtravel on both sides each 1 mm Reference mark in the middle of the ML/2 2 ML/2+16 start of the Length of = +0mm MV0-x1 / MV1-x0 ML/2+12 Length of = +0mm ML/2+10 Length of = +22mm 2 4 end of the MV0-x Minimal measuring length MV-x0 Only for SINGLEFLEX! - 2 -
4 Dimensions and installation conditions LIK 22 Connecting cable 40 M/ 0.0 F 26± ±0.1 Mounting surface 0.07/8 11±0.1.8 Alternative mounting surface 7 0.6±0.1 H±0.1 DOUBLEFLEX Scanning side scanning head Bonding surface Bonding pad 6 8 Adhesive tape A Ø.7 1.±0.1 Specification of H ± 0.1 SINGLEFLEX 1.1 DOUBLEFLEX /40 A 0.1 F F... Machine guideway Allocation of scanning head, and LIK 22 (14,) (8,2) (1) Positive counting direction Measuring length ML End of Start of Reference mark in the middle of the ML/2+16 Length of = +0mm ML/2 1 ML/2+12 Maximum overtravel on both sides each 1 mm start of the legth MV0-x1 / MV1-x0 Length of = +0mm ML/2+10 Length of = +22mm end of the MV0-x Minimal measuring lenght length MV-x0 Only for SINGLEFLEX! - -
5 Dimensions and installation conditions LIK F Connecting cable 2 M/ 26± ±0.1 Mounting surface 0.07/8 11± Alternative mounting surface 0.6±0.1 H±0.1 6 DOUBLEFLEX Scanning side scanning head Bonding surface Bonding pad 8 Adhesive tape A 1.±0.1 Specification of H ± 0.1 SINGLEFLEX 1.1 Ø.7 DOUBLEFLEX /0 A 0.1 F F... Machine guideway Allocation of scanning head, and LIK 2 (14,) (8,2) (1) Positive counting direction Measuring length ML End of Start of Reference mark in the middle of the ML/2+16 Length of sacle tape = +0mm ML/2 1 Maximum overtravel on both sides each 1 mm start of the MV0-x1 / MV1-x0 ML/2+12 Length of = +0mm ML/2+10 Length of = +22mm end of the MV0-x Minimal measuring length MV-x0 Only for SINGLEFLEX! - 4 -
6 Design of DOUBLEFLEX - invariably with bonding pad Carrier tape Scale tape Douple-side adhesive tape Adhesive surface bonding pad Measuring track Reference track SINGLEFLEX - invariably without bonding pad Scale tape Douple-side adhesive tape Measuring track Reference track Connector, pin assignment 1pin D-Sub-connector Position of set-up-led Pi n Housin g 1V U p p 0- U 2- U 1- V V 0V - - U 0+ U 2+ U 1+ - shield RS NA S Z - 0 Z 2- Z V * 1 - V * 0V - A S Z + 0 Z 2+ Z + - shield 1 Colour - - vt pk rd bn bu bu wh - - gy bk gn - *... bridged in the connector - -
7 Ordering key for scanning head Designation example Sensor 2 Two field sensor Dimension (mm) 1 0 x 11 x 6 mm³ 2 40 x 11 x 7 mm³ 2 x 11 x 9. mm³ Grating period - 20 µm Output signals C sinusoidal signal 1 V pp L square wave signal RS 422 with x interpolator M square wave signal RS 422 with 10x interpolator I square wave signal RS 422 with 2x interpolator N square wave signal RS 422 with 0x interpolator P square wave signal RS 422 with 100x interpolator 1... supplied with surcharge 2... only for LIK 22 and LIK 2 LIK L T Z Z X Connectors on cable 1pin D Sub; electronics in the connector Cable fixed to the scanning head (.7 mm) R 0. m S 0. m T 1 m P 1, m V 2 m W m U 1 other length on request (length max. m) Version - standard 1 non- magnetic scanning head K set-up- LED in the connector N 1 non- magnetic scanning head; set- up- LED in the connector Installation conditions 2 thread M in the scanning head 1 2 bore in the scanning head Frequency/ Edge separation distinguishing mark for clock frequency of counter on request (only valid for versions with interpolation) Ordering key for s Designation example MV B P Material steel tape/ double array sensor (ML) [mm] Design type 0 DOUBLEFLEX, standard 1 SINGLEFLEX, standard minimal with reference mark 1,4 Accuracy class 1 ± 1 µm 2 ± 2 µm ± µm 4 ± µm Grating period P 20 µm Position of reference mark (RM) O none B RM in the center of the F RM distance coded at 1000 * GP N RM at 0 mm spacings, starting at the center of E** customized version 6 Position of bonding pad/ construction 0 none 1 1 bonding pad at the start of 2 without adhesive tape ** bonding pad at the end of only for SINGLEFLEX 2... only for DOUBLEFLEX... minimal of DOUBLEFLEX = 100 mm maximal of DOUBLEFLEX = 700 mm mm... maximal = 8000mm 6... specified in XXX mm from start of **... no standard, supplied with surcharge - 6 -
8
NUMERIK JENA LIK 21 LIK 22 LIK 23. Exposed Linear Encoders compact model range
NUMERIK JENA LIK 21 LIK 22 LIK 23 Exposed Linear Encoders compact model range Exposed Linear Encoders- compact model range LIK 21 LIK 22 LIK 23 Extremly small dimensions of scanning head for crowded installation
NUMERIK JENA. LIA Series. Exposed Linear Encoder with Signal Control
NUMERIK JEN LI Series Exposed Linear Encoder with Signal Control 1 Features Encoders that report the position in drive systems, especially in linear drives, are often presented with contradictory demands,
Rotary Encoder System Compact Model Range
we set the standards RIK Rotary Encoder System Compact Model Range 2 Incremental rotary encoder Features Compact design, consisting of scanning head with round cable, 15pin D-sub connector and grating
SIMPLY PRECISE PRELIMINARY. Preliminary product overview - LAK encoder. LAK 1 Absolute linear encoder with signal control
PRELIMINARY Preliminary product overview - LAK encoder LAK 1 Absolute linear encoder with signal control 2 Index 1. Overview 3 2. Applications 3 3. Technical data 4 4. General specifications 5 5. Dimensions
XXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
RGH24 encoder system. Data sheet L C. RGH24 readhead: RGS20 scale:
L-9517-9677-01-C Renishaw s RGH24 series is a non-contact optical encoder system. The compact readhead features a set-up led indicator, unique filtering optics for excellent dirt immunity, and integral
IntelLiCoder (ICODER) - General information. ICODER - Measuring principle
IntelLiCoder (ICODER) - General information Based on the tried and tested ICODER technology of length and angle acquisition where a high precision graduations with structures etched photolithographically
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
Absolute Encoders Multiturn
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just
EVOLUTE absolute optical encoder with Yaskawa serial communications
L-9515-9641-01-C EVOLUTE absolute optical encoder with Yaskawa serial communications True absolute non-contact optical encoder system: no batteries required Wide set-up tolerances for quick and easy installation
XXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
Absolute Encoders - Singleturn
The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional
BML-S1F_-A/Q _-M _-_0-KA Magnetic Linear Encoder System. User's Guide. Magnetic Linear Encoder System BML-S1F_-A/Q _-M _-_0-KA
User's Guide BML-S1F_-A/Q _-M _-_0-KA Balluff GmbH Schurwaldstraße 9 73765 Neuhausen a.d.f. Deutschland Tel. +49 7158 173-0 Fax +49 7158 5010 balluff@balluff.de www.balluff.com 1 Table of Contents 1 Safety
Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
Absolute Encoders Multiturn
Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN
Phone: Fax: Web: -
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
Absolute Encoders - Singleturn
The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos
Rotary Measuring Technology
Our ATEX encoders now also carry approval for Dust Flameproof-enclosure type of construction with approval for Zone 1 and 21 ExII2GEExdIICT6 and ExII2DIP6xT85 C Shaft ø 12 mm One type for every situation:
DIGITAL LENGTH GAUGES
DIGITAL LENGTH GAUGES Series ST 12 / ST 30 Key-Features: Content: Mechanical Data...2 Electrical Data...2 Technical Drawing...3 Gauging Force / Path Diagram...4 Gauging Force / Pressure Diagram...4 Electrical
Exposed Linear Encoders
Exposed Linear Encoders May 2011 Exposed Linear Encoders Linear encoders measure the position of linear axes without additional mechanical transfer elements. This eliminates a number of potential error
Absolute Encoders Singleturn
The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra
Exposed Linear Encoders
Exposed Linear Encoders February 2010 Exposed Linear Encoders Linear encoders measure the position of linear axes without additional mechanical transfer elements. This eliminates a number of potential
RGH34 encoder system. Data sheet L A. RGH34 readhead and RGI34 interface: RGS40 scale:
L-9517-978-01-A The Renishaw RGH34 series is a non-contact optical encoder system, providing highly-reliable positional feedback. This modular miniaturised encoder consists of an RGH34 readhead that reads
Rotary Measuring Technology
SSI or parallel interface Highest shock resistance on the market ( 2500 m/s2, 6 ms acc. to DIN IEC 68-2-27) Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 66 Various options (e.g. LATCH,
QUANTiC series encoder system
L-9517-9778-03-A QUANTiC series encoder system The QUANTiC encoder series provides robust incremental position measurement for linear and rotary systems with excellent metrology and wide installation tolerances.
QUANTiC series encoder system
L-9517-9778-02-C QUANTiC series encoder system The QUANTiC encoder series provides robust incremental position measurement with excellent metrology and wide installation tolerances that reduce or eliminate
Rotary Position Technology Incremental Encoders
-40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
PMIS2 POSIMAG Magnetoresistive Position Sensor with Incremental Output
PMIS2 POSIMAG with Incremental Compact Sensor for Industrial Applications Sensor PMIS2 Non contact Robust Fast Protection class IP67 Incremental encoder output Reference pulse Specifications Incremental
LENORD GEL BAUER
GEL 2440 with square-wave output signals and internal interpolation LENORD +BAUER... automates motion. Technical information Version 2014-08 General The measuring system comprises a scanning unit MiniCODER
Exposed Linear Encoders. June 2003
June 2003 Exposed Linear Encoders Exposed Linear Encoders Linear encoders measure the position of linear axes without additional mechanical transfer elements. This eliminates a number of potential error
RGH22 encoder system. Data sheet L B. RGH22 readhead. RGS20 scale
L-9517-9676-01-B The Renishaw RGH22 series is a non-contact optical encoder system, providing highly-reliable position feedback. The RGH22 readhead features a set-up LED indicator for easy installation,
Encoder WDG 58H.
Encoder WDG H www.wachendorffautomation.com/wdgh Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
Encoder WDGI 58E.
Encoder WDGI E www.wachendorffautomation.com/wdgie Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
Express Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
General technical data Incremental encoders
General technical data Incremental encoders Wachendorff Automation GmbH & Co. KG Industriestraße 7 D-65366 Geisenheim Tel.: +49 (0) 67 22/99 65-25 Fax: +49 (0) 67 22/99 65-70 E-Mail: wdg@wachendorff.de
Encoder WDG 100H.
Encoder WDG 00H www.wachendorffautomation.com/wdg00h Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
MYLES-3 MAGNETIC LINEAR ENCODER SYSTEM
MYLES-3 MAGNETIC LINEAR ENCODER SYSTEM magnetic measuring scale and free floating unguided sensor head Incremental Encoder output A,B Contact-less and vear free system Robust shielded metal enclosure Protection
Absolute encoders multiturn
The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just 6 x 5 mm it offers a blind hollow shaft of
Encoder WDGI 58H.
Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
NOVOTURN Multiturn Sensor non-contacting. Series RSM-2800
NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:
Online data sheet TTK70-HXA0-K02 TTK70 MOTOR FEEDBACK SYSTEMS LINEAR HIPERFACE
Online data sheet TTK70-HXA0-K02 TTK70 TTK70-HXA0-K02 TTK70 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Measuring step Measuring length Ordering information
Rotary Position Technology
Magnetic Rings LM-2 / RMT-2 High rotational speed IP High IP Shock/vibration resistant Reverse polarity protection Robust Increased ability to withstand vibrations and rough installation: Eliminates machine
RTLC20 high accuracy incremental linear scale
L-9517-9417-05-A RTLC20 high accuracy incremental linear scale RTLC20 linear encoder tape scale from Renishaw combines ±5 µm/m accuracy with the ruggedness of stainless steel. Two versions are available;
Temposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet
Temposonics Magnetostrictive Linear Position Sensors GB-M / GB-T SSI Sensor element and electronics can be changed Flat & compact sensor electronics housing Electrical connection is freely rotatable MEASURING
Encoder WDG 50B.
Encoder WDG 0B www.wachendorffautomation.com/wdg0b Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
TONiC DOP (dual output) encoder system
L-9517-9411-03-A TONiC DOP (dual output) encoder system Renishaw s TONiC series encoders are now available with simultaneous dual output interfacing. The robust DOP interface can be situated up to 10 m
ENCODER. SSI Multiturn. Series , Key-Features: Content:
ENCOER SSI Multiturn Series 8.5863, 8.5883 Content: Order Code Shaft... Order Code Hollow Shaft...3 Order Code Blind Hollow Shaft...3 Connection...4 Technical rawing...5 Technical ata...8 Key-Features:
Magnetic Linear Measuring System. MS01 Technical manual
Magnetic Linear Measuring System MS1 Technical manual a The measuring scale is made of a polymerbonded ferritic material. An alternating magnetic field H is produced over the measuring carrier by systematic
RESOLUTE absolute optical encoder with Siemens DRIVE-CLiQ serial communications
L-9517-9524-04-D RESOLUTE absolute optical encoder with Siemens DRIVE-CLiQ serial communications True absolute non-contact optical encoder system: no batteries required Wide set-up tolerances for quick
SPB-TT and SPB-TS Linear Encoder For Pressbrake applications
SPB-TT and SPB-TS Linear Encoder Specification SPB-TS and SPB-TT Accuracy +/- 10µm Resolution 1µm or 5µm Output Type RS422 Differential Quadrature Max.Traverse Speed 60m/min (198ft/min) Max.Acceleration
Distance sensors. System description. Distance measurement using triangulation
Distance sensors System description Distance measurement using triangulation The measurement principle of optical triangulation is suitable for the precise determination of distances at close range. With
Rotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
IBV 100/EXE 100 Interpolation and Digitizing Electronics
Linear Encoders Angle Encoders IBV 1/EXE 1 Interpolation and Digitizing Electronics Rotary Encoders 3-D Touch Probes Position Display Units Numerical Controls HEIDENHAIN linear, rotary and angle encoders
Laser light scanner with background suppression. Dimensioned drawing
Dimensioned drawing We reserve the right to make changes DS_HT10_2M_en_0130293.fm en 01-201/09 0130293 18-30 V DC 0 2000mm The laser light scanner, based on the principle of light propagation time measurement,
MONORAIL AMS. Integrated Linear Distance Measuring System
MONORAIL AMS Integrated Linear Distance Measuring System A complete package consisting of precision, adjustment and service, with significant design advantages Reduction of the complexity and minimization
RGH25F encoder system
L-9517-9762-01-A The Renishaw RGH25F series is a non-contact optical encoder system, providing highly-reliable position feedback. This system consists of an ultra-compact RGH25F readhead that reads a graduated
SPB-TT and SPB-TS Linear Encoder For Pressbrake applications
Specification Encoder Assembly SPB-TS and SPB-TT Accuracy +/- 10µm Resolution 1µm or 5µm Output Type RS422 Differential Quadrature Max. Traverse Speed 60m/min (198ft/min) Max. Acceleration 100m/s2 (10g)
Accurax linear motor axis
ADR R-EA-AF-@ Accurax linear motor axis Advanced linear motor axis High-efficiency iron-core linear motors and magnet tracks in a wide range of over 00 standard linear motor axis. ow moving mass to ensure
POSICHRON position sensor in stick design. Protection class. Voltage: V, 3 wire Current: ma, 3 wire
POSICHRON Position Sensor Stick Design with Analog Specifications POSICHRON position sensor in stick design Protection class IP67 Measurement range 0... 100 up to 0... 5750 mm Absolute position measurement
RESOLUTE FS absolute optical encoder with Siemens DRIVE-CLiQ serial communications
L-9517-9701-01-C RESOLUTE FS absolute optical encoder with Siemens DRIVE-CLiQ serial communications True absolute non-contact optical encoder system: no batteries required ISO 13849: 2015 Pld IEC 61508:
absolute optical encoder for Panasonic serial communications
L-9517-9460-05-B absolute optical encoder for Panasonic serial communications True absolute non-contact optical encoder system: no batteries required Wide set-up tolerances for quick and easy installation
LENORD. +BAUER... automates motion. GEL 2351 with current or voltage interface. Technical information Version General. Features.
GEL 2351 with current or voltage interface LENORD +BAUER... automates motion. Technical information Version 201-11 General Single turn absolute rotary encoder with a resolution of 16 bits Magneto-resistive
RGH41 encoder system. The Renishaw RGH41 series is a non-contact optical encoder system, providing highly-reliable positional feedback.
L-9517-9713-01-B The Renishaw RGH41 series is a non-contact optical encoder system, providing highly-reliable positional feedback. The readhead offers the benefits of Renishaw s established encoder series,
The ZSH stepper motor convinces with its robust housing with high-strength cable gland. The motor is waterproof up to 10 m with the IP68 option.
/ZSH HRSH ZSH Stepper otor Robust. Powerful. Reliable. Phytron s HRSHEnvironment motors are particularly suitable for challenging applications in mechanical engineering and industry. Challenging conditions
Magnetic sensor MSK320 Incremental, digital interface, resolution 12.5 μm, scaling factor 64 1
Incremental, digital interface, resolution 12.5 μm, scaling factor 64 1 Profile Max. resolution 12.5 μm max. resolution 0.006 with MR320 or MR320 (250 poles) Repeat accuracy ±0.04 mm Repeat accuracy of
Rotary Measurement Technology Absolute Encoders, Multiturn
Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
Veratus Series Encoders
COMPACT MicroE Encoders PRODUCT DATA SHEET Veratus Series Encoders Compact Precision Encoders for the World s Machines and Instruments Built with the new VeraPath optical encoder technology from MicroE,
POSICHRON position sensor in a stainless steel pressure case. Voltage: V, 3 wire Current: ma, 3 wire
Rod Profile with Analog Specifications POSICHRON position sensor in a stainless steel pressure case Protection class IP68 Compression-proof up to 15 bar Measurement range 0... 100 to 0... 5750 mm Absolute
Linear Encoders based on the inductive AMOSIN measuring principle
AMO GmbH Linear Encoders based on the inductive AMOSIN measuring principle Brochure September 2018 2 This document was created very carefully. If there are any technical changes, they will promptly updated
NOVOSTRICTIVE Transducer up to 4250 mm touchless. Series TH1
NOVOSTRICTIVE Transducer up to 4250 mm touchless Series TH1 IMPULSE Special features Touchless magnetostrictive measurement technology Rod style transducer, integratable Non-contacting position detection
! Inductive Encoders comparable to Optical Angle Encoders in both Accuracy and Resolution (Arc Seconds Range) ! High Speeds up to 120,000 RPM
AMO Automatisierung Messtechnik Optik GmbH ANGLE MEASURING SYSTEMS based on the AMOSIN - Inductive Measuring Principle! Inductive Encoders comparable to Optical Angle Encoders in both Accuracy and Resolution
LMA10 absolute magnetic encoder system
LM10D01_04 Issue 4, 5 th July 2016 LM10 absolute magnetic encoder system Track system LM10 is an absolute magnetic linear encoder system which has been designed for motion control applications as a position
Magnetic sensor MSK5000 Incremental, digital interface, resolution 1 μm, scaling factor
Incremental, digital interface, resolution μm, scaling factor 250 Profile Max. resolution μm Repeat accuracy ±0.0 mm Repeat accuracy of ± increment Status L display Works with magnetic tape M500/, MR500,
NOVOHALL Rotary Sensor non-contacting. Series RSC-2800
NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection
ChipEncoder Series. MicroE Encoders. Nano. SMT Encoders for High Performance, High Volume Designs PRODUCT DATA SHEET. Accelerate Your Innovation.
MicroE Encoders PRODUCT DATA SHEET Nano ChipEncoder Series SMT Encoders for High Performance, High Volume Designs ChipEncoder models feature built-in interpolation and mount directly on your printed circuit
Inductive Standard Displacement Transducers
WA Inductive Standard Displacement Transducers Special features - Available as displacement probe or with detachable plunger - Good thermal stability in the event of temperature gradients - Space saving,
QL55 Series Luminescence Sensor
Self-contained, microprocessor-based luminescence sensor Features Self-contained design in a robust, compact metal housing High sensitivity Microprocessor-controlled Senses luminescent marks, even on luminescent
Motor Encoders. With Motor encoders Series M - Optimal control of motor feedback -
Motor Encoders With Motor encoders Series M - Optimal control of motor feedback - Hengstler supplies the new high-performance motor encoder series M for use with brushless servo motors and stepper motors.
Online data sheet VT12T-2P410 V12-2 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTT-P0 V- A B C D E F Illustration may differ Ordering information Type Part no. VTT-P0 606 Other models and accessories www.sick.com/v- H I J K L M N O P Q R S T Detailed technical data
PRODUCT INFORMATION UNITRONIC SENSOR SH M12. Info Other types are available at or on request
UNITRONIC SENSOR M12 M12 plug/socket on free conductor end, shielded Sensor/actuator cordset, M12, PUR halogenfree, 3-, 4-, 5-pin. versions, straight and angled M12 plugs and sockets, shielded, A- coded,
PMIS3 POSIMAG Magnetic Scale Position Sensor
PMIS3 POSIMAG Magnetic Scale Position Sensor Very compact sensor for industrial applications Sensor head PMIS3 Non-contact, no wear High velocity Robust shielded metal enclosure Protection class IP67 Incremental
Product Information. ECA 4000 V Absolute Modular Angle Encoder for Application in High Vacuum
Product Information ECA 4000 V Absolute Modular Angle Encoder for Application in High Vacuum December 2016 ECA 4412 V, ECA 4492 V Absolute angle encoder with high accuracy for use in high vacuum Steel
Online data sheet VL18-4N3112 V18 PRODUCT PORTFOLIO
Online data sheet VL8-4N V8 VL8-4N V8 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Sensor/ detection principle Housing design (light emission) Housing
Product Information. ERN 1085 Incremental Rotary Encoder with Z1 Track
Product Information ERN 1085 Incremental Rotary Encoder with Z1 Track 02/2018 ERN 1085 Rotary encoder with mounted stator coupling Compact dimensions Blind hollow shaft 6 mm Z1 track for sine commutation
Technical data. General specifications V DC No-load supply current I 0. typ. 50 ma Power consumption P 0
Model Number SYNCHRON SERIELLES INTERFACE Cable pull rotary encoder with SSI interface Features Solid yet lightweight plastic construction Compact, slim design (the shaft of the mounted rotary encoder
LENORD. +BAUER... automates motion. GEL 2037 with heavy duty flange or tooth wheel adapter. Technical information Version General.
GEL 2037 with heavy duty flange or tooth wheel adapter LENORD +BAUER... automates motion. Technical information Version 2014-07 General Multiturn absolute rotary encoders with a resolution of up to 25
DMP 343. Industrial Pressure Transmitter. Without Media Isolation. appmeas.co.uk +44 (0)
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
PHOTOELECTRIC SENSORS. Online data sheet
Online data sheet A B C D E F Illustration may differ Ordering information Type Part no. WTB4SL-3P6V 0585 Other models and accessories www.sick.com/w4sl-3v H I J K L M N O P R S T Detailed technical data
U10M. Force Transducer. Special features. Data sheet. Mounting dimensions of the connection variants in mm [inch]
![U10M. Force Transducer. Special features. Data sheet. Mounting dimensions of the connection variants in mm [inch]](/thumbs/76/73031865.jpg "U10M. Force Transducer. Special features. Data sheet. Mounting dimensions of the connection variants in mm [inch]")
U10M Force Transducer Special features - Precise and robust tensile/compressive force transducer for static and dynamic measurement tasks - High lateral force and bending moment stability, the effect of
* _1116* Drive Technology \ Drive Automation \ System Integration \ Services. Revision. Explosion-Proof Servomotors CMP40 63, CMP.
Drive Technology \ Drive Automation \ System Integration \ Services *23069317_1116* Revision Explosion-Proof Servomotors CMP40 63, CMP.71 100 Edition 11/2016 23069317/EN SEW-EURODRIVE Driving the world
Digital Readout. Type: BC-01-HS
Digital Readout Type: BC-01-HS Forgalmazó: Klavio Kft 1046 Budapest Kiss Ernő utca 3. 313/b. Tel.: (1) 390-1023 e-mail: klavio@klavio.hu Weboldal: www.klavio.hu Page 1 Content PAGE 1. Basic features of
300 ma max. 2 mm ,8 mm. ±1 mm. ±1 Digit. A, A, B, B / signal Z, Z (optional) / status signal ERR (optional) Zinc die casting IP67
Variant e: PMIS4, PMIR 7, PM IR7N POSIROT Magnetic incremental encoder Magnetic wheels for rotative applications All metal housing Protection class IP67 Excellent protection of the active measurement area
LENORD. +BAUER... automates motion. GEL 295x Customer-specific precision encoder. Technical Information Version General information.
GEL 95x Customer-specific precision encoder LENORD +BAUER... automates motion. Technical Information Version 04- General information Extremly robust rotary encoder with stainless steel housing for measuring
LENORD. +BAUER... automates motion. Magnetic absolute rotary encoder GEL 2037 with heavy duty flange or tooth wheel adapter
Magnetic absolute rotary encoder GEL 2037 with heavy duty flange or tooth wheel adapter LENORD +BAUER... automates motion. Technical information Version 01.12 General Multiturn absolute rotary encoders
Product Information. ECA 4000 V Absolute Modular Angle Encoder for Application in High Vacuum
Product Information ECA 4000 V Absolute Modular Angle Encoder for Application in High Vacuum 10/2017 ECA 4412 V, ECA 4492 V Absolute angle encoder with high accuracy for use in high vacuum Steel scale
Encoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
Absolute encoders multiturn
Sendix M / M8 (shaft / hollow shaft) The Sendix M with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just x mm it
Absolute linear encoders based on the inductive AMOSIN Measuring Principle
Absolute linear encoders based on the inductive AMOSIN Measuring Principle Mai 2016 Product information August 2016 LMKA - 2010 series Composed of Encoder LMKA-2010 and measuring scale Grating period 1000µm
Online data sheet VT12T-2N112 V12-2 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTT-N V- A B D E F Illustration may differ Ordering information Type Part no. VTT-N 60609 Other models and accessories www.sick.com/v- H I J K L M N O P R S T Detailed technical data
Float switch For industrial applications, plastic version Model RLS-2000
Level measurement Float switch For industrial applications, plastic version Model RLS-2000 WIKA data sheet LM 50.04 Applications Level measurement of liquids in machine building Control and monitoring