SignalOn Series. RF Signal Management. Active & Passive Products* Passives: Actives:
|
|
- Kathleen Hill
- 5 years ago
- Views:
Transcription
1 RF ignal Management ctive & Passive Products* Passives: High density with standard F & BN connectors Patented make-before-break attenuator pad design for uninterruptible signal balancing hassis supports both passive & active modules lear chassis door provides protection & clear view of modules lear attenuator pad covers & patented pad guides for simplified maintenance High quality, precision F or BN connectors Designed to exceed NEB requirements for grounding/bonding Independent EMI near & far-field testing One year warranty on all passive modules vailable in 1RU, 2RU, & 5RU chassis NEB Level 3 compliant Modules: RF splitting/combining Diplex filters L-Band splitters Directional couplers onditioning & monitoring ccessories 5RU hassis 5RU hassis ctives: Operation from 50 MHz to 1 GHz Gas technology with near-100% surface mount design for high performance Meets MIL-202 specs for quality & reliability Mounts in same ignalon chassis as passive modules for maximum design flexibility Digitally variable gain & slope control for non-service-affecting signal level adjustments 20 db monitor points on both input & output signals for testing & troubleshooting Blind-mate power bus connector with gold-on-gold contacts; requires no cabling hassis-mounted -D & D-D power supply options Redundant powering with dual load shared power supplies for increased availability External +24 VD powering option One year warranty on all active modules NEB Level 3 compliant Modules: Forward amplifiers Reverse amplifiers Power supplies RF switches Passive Module with Make-Before-Break ttenuation 2RU hassis 1RU hassis 8-Position, 2RU Powered hassis mplifier 8-Position, 2RU Powered hassis (rear view) *Products or features contained herein may be covered by one or more U.. or foreign patents. Page 1 of 13
2 Typical Downstream onfiguration Broadband TV RF pectrum db freq L-Band atellite plitters QM modulators Receivers processors modulators RFM mplifiers plitter RFM Fiber outside plant to subscribers MT for HD, VoIP Redundant mplifiers with RF witch = ombiner = plitter = mplifier VOD servers Typical Upstream onfiguration Broadband TV RF pectrum db freq Network diagnostics/test gear QPK set-top control network Fiber plant from subscribers MT for HD, VoIP VOD servers = ombiner = plitter = mplifier Page 2 of 13
3 hassis 20-Position, 5RU hassis 20-Position, 5RU Powered hassis, NEB Bracket Extensions 8-Position, 2RU hassis 4-Position, 1RU hassis Example Part Number: N-20V N B : Type: 20V = 20-position, Vertical 08H = 8-position, Horizontal 04H = 4-position, Horizontal 2: Power Kit: N = No Y = Yes* 3: olor: B = Black Passive hassis N-20VNB N-20VN-NEB N-08HNB N-08HNB-R N-04HNB ctive hassis 20-position hassis, 5RU, Black 20-position hassis, 5RU, NEB (includes EB-87N) 8-position hassis, 2RU, Black 8-position Reversible hassis, 2RU, Black 4-position hassis, 1RU, Black N-20VYB 20-position Powered hassis, 5RU, Black N-20VY-NEB 20-position Powered hassis, 5RU, NEB (includes EB-87N) N-08HYB 8-position Powered hassis, 2RU, Black hassis ccessories EB-87N NOTE: *20 and 8-position only. Bracket Extensions for 23" (5RU) Rack Page 3 of 13
4 Passives The ignalon eries, combined with the innovative cable management of the chassis, provides engineers with a variety of products to simplify the RF signal management challenge. RF plitter/ombiner Modules - 5 MHz to 1 GHz Features: High density with standard F & BN connectors Patented make-before-break attenuator pad design for hitless signal balancing hassis supports both passive & active modules lear chassis door provides protection & clear view of modules lear attenuator pad covers & patented pad guides for simplified maintenance High quality, precision F or BN connectors Designed to exceed NEB requirements for grounding/bonding Independent EMI near & far-field testing One year warranty on all passive modules vailable in 1RU, 2RU, & 5RU chassis NEB Level 3 compliant Plain plitter/ombiner Pad and Monitor Module with Make-Before-Break ttenuation Page 4 of 13
5 Passives RF plitter/ombiner Modules - 5 MHz to 1 GHz (cont d) Example Part Number: N-M B 24 M : Module Type: P = Plain plitter/ombiner 2: onnector Type: F = F 3: onfiguration: 12 = 2:1 14 = 4:1 Part Number N-MPF12 N-MPF14 N-MPF18 N-MPF24 N-MPF32 N-MB24M0 N-MB24M0 N-MB32M0 N-MB18M0 N-MB18M0 NOTE: *3x2:1 and 2x4:1 housed in a single module. **Leave last two digits blank for plain modules. Plain plitter/ombiner Modules N-MPB12 Plain, BN onnector, 2:1 N-MPB14 Plain, BN onnector, 4:1 N-MPB18 Plain, BN onnector, 8:1 N-MPB24 Plain, BN onnector, 2x4:1 N-MPB32 Plain, BN onnector, 3x2:1 N-MXB24M0 N-MB32M0 = ombiner with Pad/Monitor = plitter with Pad/Monitor X = plitter and ombiner with Pad/Monitor - 2x4:1 Module only B = BN 18 = 8:1 24 = 2x4:1* 32 = 3x2:1* 4: Make-Before-Break ttenuation** : Description Plain, F onnector, 2:1 Plain, F onnector, 4:1 Plain, F onnector, 8:1 M0 = 0 db Default Plain, F onnector, 2x4:1 Plain, F onnector, 3x2:1 ombiner with Monitor, BN onnector, 2x4:1, 0 db Default plitter with Monitor, BN onnector, 2x4:1, 0 db Default plitter/ombiner with Monitor, BN onnector, 2x4:1, 0 db Default ombiner with Monitor, BN onnector, 3x2:1, 0 db Default plitter with Monitor, BN onnector, 3x2:1, 0 db Default ombiner with Monitor, BN onnector, 8:1, 0 db Default plitter with Monitor, BN onnector, 8:1, 0 db Default Page 5 of 13
6 Passives RF plitter/ombiner Modules - 5 MHz to 1 GHz (cont d) Example Part Number: N-M F 24 M : Module Type: = ombiner with Pad/Monitor 2: onnector Type: F = F 3: onfiguration: 18 = 8:1 4: Make-Before-Break ttenuation : M0 = 0 db Default Part Number plitter/ombiner with Pad & Monitor Modules N-MF24M0 N-MF24M0 N-MXF24M0 N-MF32M0 N-MF32M0 N-MF18M0 N-MF18M0 = plitter with Pad/Monitor X = plitter and ombiner with Pad/Monitor - 2x4:1 Module only 24 = 2x4:1* 32 = 3x2:1* Description ombiner with Monitor, F onnector, 2x4:1, 0 db Default plitter with Monitor, F onnector, 2x4:1, 0 db Default plitter/ombiner with Monitor, F onnector, 2x4:1, 0 db Default ombiner with Monitor, F onnector, 3x2:1, 0 db Default plitter with Monitor, F onnector, 3x2:1, 0 db Default ombiner with Monitor, F onnector, 8:1, 0 db Default plitter with Monitor, F onnector, 8:1, 0 db Default NOTE: *3x2:1 and 2x4:1 housed in a single module. Dual 4-port B/N ombiner N-MF24BN 1x Broadcast, 3x Narrowcast ombiner, Dual, F onnector, 0 db Default N-MB24BN 1x Broadcast, 3x Narrowcast ombiner, Dual, BN onnector, 0 db Default B/N ombiner Directional oupler Modules - 5 MHz to 1 GHz Example Part Number: N-MDB 3 09 R : onnector Type: F = F B = BN 2: ircuit Quantity: 1 = ingle ircuit (discontinued) 3 = Triple ircuit 3: D Value: 09 = 9 db 12 = 12 db 20 = 20 db 4: pplication Type: R = Rear Narrowcast ignal Port Directional oupler Modules N-MDB309R BN onnector, Triple ircuit, 9 db N-MDB312R BN onnector, Triple ircuit, 12 db N-MDB320R BN onnector, Triple ircuit, 20 db N-MDF309R F onnector, Triple ircuit, 9 db N-MDF312R F onnector, Triple ircuit, 12 db N-MDF320R F onnector, Triple ircuit, 20 db Directional oupler Page 6 of 13
7 Passives Diplex Filter Modules Features: Diplex filter modules conveniently separate or combine the forward & reverse path frequency bands so that the respective signals can then be routed to the appropriate downstream, or upstream transmission equipment Two frequency options to choose from 5-65/ MHz (Int l), or 5-42/ MHz (Domestic) Three circuits housed a single module -100 db EMI Isolation -70 db ircuit to ircuit Isolation Domestic Diplex Filter Module N-MDPXB3L BN onnector, Low 5-42 MHz, High MHz N-MDPXF3L F onnector, Low 5-42 MHz, High MHz International Diplex Filter Module N-MDPXB3H N-MDPXF3H onditioning & Monitor Modules Features: BN onnector, Low 5-65 MHz, High MHz F onnector, Low 5-65 MHz, High MHz Diplex Filter Typically placed at the input to the forward path optical transmitter, this module allows for conditioning & grooming of the RF signal gain & slope. It is designed as 1:1 input to output with two MBB circuits in series for pad & EQ placement. -20 db front facing monitor port NEB Level 3 compliant onditioning and Monitor Modules N-MMB320FM0 BN onnector, Triple ircuit, 20 db, 0 db Default N-MMF320FM0 F onnector, Triple ircuit, 20 db, 0 db Default Functional chematic TTENUTION PD EQULIZTION (EQ) PD IN OUT -20 db (MONITOR) Triple & M with F-onnectors onditioning & Monitor Module Page 7 of 13
8 Passives L-Band atellite plitter Modules MHz to 2.15 GHz The L-Band series satellite splitter modules are engineered for high performance in the 950 MHz to 2.15 GHz frequency range. These plain splitter/combiner modules feature dual port power-passing capability for powering LNB s. ll L-Band modules are available with precision F or BN connectors, and are NEB Level 3 compliant. Example Part Number: N-MLB : onnector Type: F = F B = BN 2: onfiguration: 12 = 2:1 14 = 4:1 18 = 8:1 24 = 2x4:1* 32 = 3x2:1* L-Band atellite plitter Modules N-MLB12 BN onnector, 2:1 plitter N-MLB14 BN onnector, 4:1 plitter N-MLB18 BN onnector, 8:1 plitter N-MLB24 BN onnector, 2x4:1 plitter N-MLB32 BN onnector, 3x2:1 plitter N-MLF12 F onnector, 2:1 plitter N-MLF14 F onnector, 4:1 plitter N-MLF18 F onnector, 8:1 plitter N-MLF24 F onnector, 2x4:1 plitter N-MLF32 F onnector, 3x2:1 plitter NOTE: *Housed in a single module. ll L-Band modules feature dual port power passing capability. L-Band atellite plitter L-Band atellite plitter (rear view) Functional chematics P 1 P P 2 P 4 2-Way plitter 4-Way plitter 8-Way plitter P P Page 8 of 13
9 ctives Forward Path mplifier Modules Forward Path mplifier pecifications Forward Path mplifier Modules N-MB20F BN onnector, 20 db N-MB30F BN onnector, 30 db N-MF20F F onnector, 20 db N-MF30F F onnector, 30 db NOTE: Dimensions: 8.5"H x 1.63"W x 7.52"D (21.6H x 4.13W x 19.1D cm) mplifier Page 9 of 13
10 ctives Reverse Path mplifier Modules The Return Path mplifier was designed specifically to solve problems particular to your environment. Providing greater density, unparalleled cable management, greater functionality & redundant powering, the return path amplifier is part of the system approach to integrating all signal management functions in a common format & modular system. Features: Fixed 22 db Low distortion characteristics Low noise figure MHz bandwidth Two 20 db monitor ports (input & output) BN or F connectors or D powering Power redundancy (optional) Reverse Path mplifier Reverse Path mplifier Modules N-MB22R 22 db Fixed Gain, BN onnectors N-MF22R 22 db Fixed Gain, F onnectors NOTE: Dimensions: 8.5"H x 1.63"W x 7.52"D (21.6H x 4.13W x 19.1D cm) Page 10 of 13
11 ctives Power upply Modules Power upply pecifications Power upply Modules N-MVUV-N to D (Universal 100/110/240) N-MV48D D to D (-48 VD) N--BL-D-D Replacement Power ord for N-MV48D Power upply Replacement Power ord Page 11 of 13
12 ctives RF witch Modules The ignalon RF witch Module (RFM) is designed for use with the ignalon 8-position, or 20-position powered chassis. ll RF connections to the switch are made through standard 75 Ohm BN, or F connectors on the rear of the module. ll operating controls & indicators are located on the front panel with configuration controls located on the rear of the module. The primary function of the module is to monitor the RF signal gain of the operating primary input, and switch to the backup B input if the gain of the primary path rises, or falls below the pre-set customer selected threshold. hould the input side go above, or fall below the threshold of the unit, the RFM will rapidly switch the input from the failed input to the secondary input. This switch usually is less that 10 milliseconds. witch status, failure LED, & RF level bar graphs are mounted on the front panel of the switch module. witching threshold: +/- 3 db or +/- 6 db, & alarm contact closures are located on the rear of module. Features: ontinuous monitoring of primary & secondary Detects both high & low power failures User-selectable switching threshold: +/- 3 db or +/- 6 db Fail-over switching time < 10 ms utomatic switchback after path is restored Front-panel LED status & dual power level displays larm contact for remote failure monitoring vailable in BN & F-connector configurations ingle or dual modules Low power consumption (0.65 W single, 1.3 W dual) Easily configured for redundancy or -B switch applications Front panel bar graph display provides indication of RF power & switching threshold Indication of switch status provided by front panel LED & rear terminal block contacts Easily configured switching threshold levels via rear DIP switch One-step calibration uto switch-back feature to primary input Built-in delay to prevent from false switching utomatic or manual modes of operation NEB Level 3 compliant Redundant RF witch Modules N-MRFM1-B ingle ircuit, BN onnector N-MRFM2-B Dual ircuit, BN onnector N-MRFM1-F ingle ircuit, F onnector N-MRFM2-F Dual ircuit, F onnector Dual RF witch Page 12 of 13
13 ccessories Part Number ttenuator Pads Description N--P-XX XX db Pads, Qty 25 (replace XX with 00 through 26) N--P db Pads, 5 of each Pad Value, Total Qty 25 N--P db Pads, 5 of each Pad Value, Total Qty 25 N--P db Pads, 5 of each Pad Value, Total Qty 25 N--P db Pads, 5 of each Pad Value, Total Qty 25 N--P db Pads, 5 of each Pad Value, Total Qty 25 N--P-M0 3,6,9,12,15 db Pads, 5 of each Pad Value, Total Qty 25 N--TP Ohm Termination Pads, Qty 25 Equalizer Pads N--LE-XX XX db Plug-in EQ (replace XX with 02 through 13) D Power Upgrade Kits N--PWRKIT-08B 2RU hassis, Black used to power 8-position N--PWRKIT-20B 5RU hassis, Black used to power 20-position Power upply ccessories N--BL-D-D N--FN N--FN-01 Blank Module overs Power ord for Power upply Fan Replacement Kit for Power upply Fan with Filter Replacement Kit for Power upply N--BLNK-01 ingle Blank Panel over Bulkhead Testpoint Panels N-MTPF2 N-MTPF6 ingle Panel with 2 F-81 Bulkhead onnectors ingle Panel with 6 F-81 Bulkhead onnectors ee web site for specifications & ordering information - Printed in anada lements Road West, jax, ON L1 7H4 anada Tel (905) Toll Free (800) Fax (905) Toll Free Fax (866) support@atxnetworks.com Page 13 of 13 IO 9001 REGITERED Rev. 09/13 (NW0840)
RF Signal Management. RF Signal Management. Active & Passive Products* Passives: Actives:
RF ignal Management RF ignal Management ctive & Passive Products* Passives: High density with standard F & BN connectors Patented make-before-break attenuator pad design for hitless signal balancing hassis
More informationD3.1 / CCAP Compliant. 1.2 GHz. Make-Before-Break (MBB) Splitter/Combiner Module Specifications
RF Signal Management Passive Products Features: D. / CCAP Compliant. GHz RU Chassis (front view) Available in -00 MHz (equalized) or - MHz (non-equalized) High passive isolation to support CCAP/D. Plain
More informationSignalOn Series. Passive Modules Splitter/Combiner Modules. Features. Specifications Make-Before-Break (MBB) Splitter/ Combiner Module. 1.
SignalOn Series Passive Modules Splitter/Combiner Modules RU Chassis (front view) Features Available in -00 MHz (equalized) or - MHz (nonequalized) High passive isolation to support CCAP /D. Plain versions
More informationSignalOn Series. RF Passive Modules INSTALLATION & OPERATION MANUAL. 1.2 GHz. D3.
SignalOn Series D./CCAP Compliant. GHz RF Passive Modules INSTALLATION & OPERATION MANUAL www.atxnetworks.com www.atxnetworks.com Although every effort has been taken to ensure the accuracy of this document
More informationD3.1 / CCAP Compliant
Patented U.S.# 7,142,414 Ultra-dense Active Products D3.1 / CCAP Compliant (front view) Combiners: : Active 8-way combiner with 2-way output splitter intended for status monitoring port Up to 20 s will
More informationUltra-Dense RF & Optical Active Modules Combiners
Ultra-Dense & Optical Active Modules Combiners Patented U.S.# 7,142,414 (front view) Active 8-way combiner with 2-way output splitter intended for status monitoring port Up to 20 s will fit into a single
More informationQ-SERIES. Amplifiers. QPAIR Redundancy Switch Amplifier System. Installation & Operation Manual
Q-SERIES Amplifiers QPAIR Redundancy Switch Amplifier System Installation & Operation Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice,
More informationModel 6942 Four Port Optoelectronic Node 870 MHz with 42/54 MHz Split
Optoelectronics Model 6942 Four ort Optoelectronic Node 870 MHz with 42/54 MHz Split Description The Model 6942 Node is a high performance, four output optoelectronic node. The Model 6942 Node can be configured
More informationRSS-2R RF-Broadband Automatic Switch The RSS-2R is a Broadband Automatic Switch, designed for the redundancy of CATV feeds in Headend and Hub sites. It monitors the RF Broadband feeds of the main and backup
More informationQ-SERIES Power. BAQ-UP (QRED) Redundancy Switch with Backup Amplifier INSTALLATION & OPERATION MANUAL.
D INUE T N O S DI Q-SERIES Power BAQ-UP (QRED) Redundancy Switch with Backup Amplifier INSTALLATION & OPERATION MANUAL www.atxnetworks.com www.atxnetworks.com Although every effort has been taken to ensure
More informationPrisma II 1310 nm High Density Transmitter and Host Module
Optoelectronics Prisma II 13 nm High Density Transmitter and Host Module Description The Prisma II optical network is an advanced transmission system designed to optimize network architecture and increase
More informationPrisma II 1310 nm High Density Transmitter and Host Module
Optoelectronics Prisma II 1310 nm High Density Transmitter and Host Module Description The Prisma II optical network is an advanced transmission system designed to optimize network architecture and increase
More informationQ-SERIES. Optical. QFQR 200A-04 Series Return Path Optical Receiver. Installation & Operation Manual
Q-SERIES Optical QFQR 200A-04 Series Return Path Optical Receiver Installation & Operation Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary, without
More informationSignalOn Series WHITE PAPER. Impact of CCAP on RF Management Isolation. Pat. #s U.S. 6,842,348; 7,043,236; Cdn. 2,404,840; 2,404,844
SignalOn Series Pat. #s U.S. 6,84,48; 7,04,6; Cdn.,404,840;,404,844 D. / CCAP Compliant Impact of CCAP on RF Management Isolation Although every effort has been taken to ensure the accuracy of this document
More informationPrisma II Multi-Wavelength High Density Transmitter
Prisma II Multi-Wavelength High Density Transmitter Increasing customer demands for advanced services and competitive pressures are causing HFC network operators to consider strategic options. One popular
More informationCCAP Compliant. Discontinued
CCAP Compliant MPTX8 Optical Transmitter Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to make amendments or correct omissions.
More informationModel 6940 Four Port Optoelectronic Node 870 MHz with 42/54 MHz Split
Optoelectronics Model 6940 Four ort Optoelectronic Node 870 MHz with 42/54 MHz Split Description The Model 6940 Node is a high performance, four output optoelectronic node. The Model 6940 Node can be configured
More informationCompact Model Fiber Deep Node 862 MHz with 42/54 MHz Split
Optoelectronics Compact Model 90090 Fiber Deep Node 862 MHz with 42/54 MHz Split Description The Scientific-Atlanta Compact Model 90090 Fiber Deep Node is a small, low-cost, 110V AC powered node that addresses
More informationGainMaker High Output Node 5-40/ MHz
Optoelectronics GainMaker High Output Node 5-40/52-1002 MHz Description The GainMaker High Output Node is designed to serve as an integral part of today s network architectures, and combines the superior
More informationCompact Node Optoelectronics
ptoelectronics Compact Node 90075 Description The Compact Model 90075 Node is Scientific-Atlanta s latest addition to its family of Compact nodes. The node offers maximized coverage for network designs
More informationModel 6940 Collector/Terminator Three Port Unbalanced Optoelectronic Node 870 MHz with 65/86 MHz Split
Optoelectronics Model 6940 Collector/Terminator Three ort Unbalanced Optoelectronic Node 870 MHz with 65/86 MHz Split Description The Model 6940 Collector/Terminator Node is a three port unbalanced node
More informationAC9000 INTELLIGENT FIBRE OPTIC PLATFORM
Kari Mäki 20.12.2012 1(7) 9000 INTLLIGNT FIBR PTIC PLATFRM Features The 9000 is an intelligent 4 output optical node of x product family. It is based on fixed platform but flexible modular solution, supporting
More informationAC GHZ DISTRIBUTION AMPLIFIER
23.5.2016 1(8) C1500 1.2 GHZ DISTRIBUTION MPLIFIER Technical specifications Parameter Specification Note Downstream signal path (values with diplex filters) Frequency range 85...1218 MHz Return loss 20
More informationMNRS Redundant RF Detector/Switch Module
Pat. #s U.S. 6,842,348; 7,043,236; Cdn. 2,404,840; 2,404,844 D3.1 / CCAP Compliant MNRS Redundant RF Detector/Switch Module Installation & Operation Manual Although every effort has been taken to ensure
More informationAC9000 INTELLIGENT FIBRE OPTIC PLATFORM
Kari Mäki 4.4.2012 1(7) 9000 INTLLIGNT FIBR PTIC PLATFRM Features The 9000 is an intelligent 4 output optical node of x product family. It is based on fixed platform but flexible modular solution, supporting
More informationGainMaker Line Extender 1 GHz with 42/54 MHz Split
RF Electronics GainMaker Line Extender 1 GHz with 42/54 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today s
More informationChromadigm CHS/CHQ Transmitter
Patented U.S.# 7,936,997 Chromadigm CHS/CHQ Transmitter QUICK START GUIDE www.atxnetworks.com www.atxnetworks.com Although every effort has been taken to ensure the accuracy of this document it may be
More informationThe New Standard in High Power Redundant Microwave Amplifier Systems Has Arrived
The New Standard in High Power Redundant Microwave Amplifier Systems Has Arrived FEATURES Output Power levels of: 8.0 kw in C-Band 6.6 kw in X-Band.5 kw in Ku-Band No Active Switching-All Passive Power
More informationPrisma II 1 GHz 1550 nm Transmitters
Optoelectronics Prisma II 1 GHz 1550 nm Transmitters Description The Prisma II optical network is an advanced transmission system designed to optimize network architectures and increase reliability, scalability,
More informationACI SDLA. Miniflex Line Extender 1002 MHz
ACI SDLA Miniflex Line Extender 1002 MHz Overview SDLA 1002 MHz 15 amp series of broadband RF amplifiers provide high quality RF distribution for fiber-to fiber, HFC (hybrid fiber coaxial), or PDN (power
More informationModel 6944 Four Port Optoelectronic Node 870 MHz with 42/54 MHz Split
Optoelectronics Model 6944 Four t Optoelectronic Node 870 MHz with 42/54 MHz Split Description The Model 6944 Node is Scientific-Atlanta s latest generation 870 MHz optical node platfm. This platfm allows
More informationGainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split
Optoelectronics GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split Description The GainMaker Node is designed to serve as the cornerstone of today s emerging fiber deeper network architectures. The
More informationCompact Nodes and 90071
Fiber ptics Compact Nodes 90070 and 90071 Dedicated ptimized Nodes The 90070 receiver node is designed for long distance trunk applications to feed architectures of any density. Dual output with enhanced
More informationGainMaker Line Extender 1 GHz with 65/86 MHz Split
RF Electronics GainMaker Line Extender 1 GHz with 65/86 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today s
More informationDownstream signal path (values with diplex filters) Upstream signal path (values with diplex filters)
PRODUT SPEIFITION 3210 3.11.2016 1 ( 7 ) Technical specifications Paramete Specification Note Downstream signal path (values with diplex filters) Frequency range 85...1218 MHz Return loss 20 db 1) Maximum
More informationThe New Standard in High Power Redundant Microwave Amplifier Systems Has Arrived
GaN MAX The New Standard in High Redundant Microwave Amplifier Systems Has Arrived FEATURES Gallium Nitride amplifiers, offering better power over frequency Output levels of up to: 10 kw in S-, C- and
More informationOptical Passives and Accessories
Optical Passives and ccessories Full line of optical passives and accessories High stability High reliability C-COR offers a complete line of DWDMs, CWDMs, WDMs, Couplers, and an Optical Shelf. Optical
More informationACI SDAF MHz Miniflex Configurable Bridger Amplifier
ACI SDAF MHz Miniflex Configurable Bridger Amplifier Overview SDAF MHz 15 amp series of broadband RF amplifiers provide high quality RF distribution for fiber-to fiber, HFC (hybrid fiber coaxial), or PDN
More informationYour one stop source for RF transmission in Cable and IPTV Headends Teleports and Broadcasting Satellite Ground Stations Satellite Operators
RF over Fiber Guide WE HAVE A PASSION......FOR OPTICAL SIGNALS Your one stop source for RF transmission in Cable and IPTV Headends Teleports and Broadcasting Satellite Ground Stations Satellite Operators
More informationMODEL BLN GHz FIBER DEEP NODE STARLINE SERIES
MODEL BLN100 1 1 GHz FIBER DEEP NODE STARLINE SERIES The BLN100 optical node is an essential building block in evolving Hybrid Fiber Coaxial (HFC) network architectures enabling amplifier to node conversions.
More informationHeadend Optics Platform (CH3000)
arris.com Headend Optics Platform (CH3000) HT3580H Series Quad-Density Full Spectrum DWDM Transmitter System FEATURES DWDM transmitter: up to 16 wavelengths on ITU grid Hot plug-in/out, individually replaceable
More informationALX. 870 MHz Line Extender
ALX 870 MHz Line Extender Overview ALX 870 MHz 15 amp series of broadband RF amplifiers provide high quality RF distribution for fiber to fiber, HFC (hybrid fiber coaxial), or PDN (power domain node) architectures.
More informationTRANSMITTER COMBINERS
1 TRANSMITTER COMBINERS 30-88 MHz LOWBAND COMBINERS Telewave Lowband and Midband Combiners offer high performance with industry-standard Telewave reliability. Telewave is one of the few remaining manufacturers
More informationThe New Standard in High Power Redundant Microwave Amplifier Systems Has Arrived
GaN MAX The New Standard in High Redundant Microwave Amplifier Systems Has Arrived FEATURES Gallium Nitride amplifiers, offering better power over frequency Output levels of up to: 10 kw in S-, C- and
More informationOpti Max Optical Node Series
arris.com Opti Max Optical Node Series OM6000 1.2 GHz 4x4 HFC Segmentable Node FEATURES Supports 1.2 GHz Downstream and 204 MHz Upstream bandpass for DOCSIS 3.1 migration Integrated segmentation switches
More information1550nm external modulated optical transmitter operating manual
1550nm external modulated optical transmitter operating manual Table of Contents Table of Contents...- 1 - Safety Instruction...- 2-1. Overview... - 3-1.1 About This Manual... - 3-1.2 Product Description...
More information750 MHz Magnamax series
750 MHz Magnamax series MLE3007RMLE Magnamax Line Extender (Legacy RMLE style) Description: The 750 MHz Magnamax series broadband line extender is essentially a drop-in-upgrade module that allows the customer
More informationD3.1/CCAP Compliant HFC. Enhance. C-Cor HECE1G 1GHz Line Extender (with AGC) INSTALLATION & OPERATION MANUAL.
HFC Enhance D3.1/CCAP Compliant C-Cor HECE1G 1GHz Line Extender (with AGC) INSTALLATION & OPERATION MANUAL www.atxnetworks.com www.atxnetworks.com Although every effort has been taken to ensure the accuracy
More informationRF LINK 750 MHz PAL LINE EXTENDER
APPLICATION ARRIS series of 750 MHz PAL Line Extenders are typically deployed in the feeder or tapped portion of the RF network. Configurable as either single or dual output devices, these amplifiers provide
More information1 GHz SASMAX II series
1 GHz SASMAX II series SASMAX II Line Extender (Legacy LEII style) Description: The 1 GHz SASMAX II series broadband line extender is essentially a drop-in-upgrade module that allows the customer to perform
More informationGainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split
Optoelectronics GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split Description The GainMaker Node is designed to serve as the cornerstone of today s emerging fiber deeper network architectures. The
More informationGainMaker Low Gain Dual System Amplifier 1 GHz with 55/70 MHz Split
RF Electronics GainMaker Low Gain Dual System Amplifier 1 GHz with 55/70 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent
More informationPrisma II 1 GHz SuperQAM Transmitter
Prisma II 1 GHz SuperQAM Transmitter The Prisma II optical networks allow for best in class architectures with increased reliability, scalability, and cost-effectiveness. The Prisma II 1 GHz SuperQAM Transmitter
More informationGainMaker Unbalanced Triple System Amplifier 870 MHz with 40/52 MHz Split
RF Electronics GainMaker Unbalanced Triple System Amplifier 870 MHz with 40/52 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent
More information70/140 MHz IF Fiber Optic Link
70/140 MHz IF Fiber Optic Link Product Description Features & Benefits IF-Band: 10 200 MHz Up to 10Km distance Powerful management capabilities via a front panel LCD and rack mounted SNMP 1550nm and CWDM
More informationEnd of Life. Optical Node Series (HL2) HLN3142C. HL2 Series PWRBlazer II Optical Nodes FEATURES PRODUCT OVERVIEW. arris.com
arris.com Optical Node Series (HL2) HLN3142C HL2 Series PWRBlazer II Optical Nodes FEATURES Compact, rugged, die cast aluminum housing allows outdoor strand, wall or pedestal mounting Up to four high level
More informationOPTICAL NODE TRUNK & DISTRIBUTION
OPTICAL NODE TRUNK & DISTRIBUTION OPTI 100RX - OPTI 200RX - OPTI 300RX Version 2 Page 1 OPTI INTRODUCTION OPTI is a broadband distribution node designed to be used as a compact, multiport optical node
More informationCisco GainMaker High Output High Gain Balanced Triple 1 GHz System Amplifier 5-85/ MHz
Data Sheet Cisco GainMaker High Output High Gain Balanced Triple 1 GHz System Amplifier 5-85/102-1002 MHz Consumer bandwidth demand continues to grow at a rapid rate every year. As a result, cable operators
More informationDiamond Line 3 Single Output Amplifiers
Diamond Line 3 Single Output Amplifiers About this Section In this section, you will find the following reference information about the Diamond Line 3 single output amplifiers: Item...Page Equipment Description...9
More informationOptiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links
2 GHz to 4 GHz Amplified Microwave Transport System The Optiva OTS-2 4 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 5 MHz to 4 GHz frequency range
More informationCXE202 UNIVERSAL AMPLIFIER
Broadband Cable Networks / Kari Mäki November 23, 2006 1(7) CXE202 UNIVERSAL AMPLIFIER The CXE202 is a dual output amplifier. It has two gain modes in one product. Gain can be selected on the field according
More informationGainMaker Unbalanced Triple System Amplifier 1 GHz with 42/54 MHz Split
Optoelectronics GainMaker Unbalanced Triple System Amplifier 1 GHz with 42/54 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent
More informationOptiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links
5 MHz to 4 GHz Amplified Microwave Transport System The Optiva OTS-2 4 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 5 MHz to 4 GHz frequency range
More informationX-Band Redundant LNA Systems
X-Band Redundant LNA Systems LRX-1000 Series Introduction Redundant LNA systems minimize system downtime due to LNA failure by providing a spare LNA and an automatic means of switching to the spare upon
More informationGainMaker High Gain Balanced Triple System Amplifier 1 GHz with 40/52 MHz Split
RF Electronics GainMaker High Gain Balanced Triple System Amplifier 1 GHz with 40/52 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the
More informationINSTALLATION MANUAL. CTA-30RK-550 Rack Mount Distribution Amplifier
INSTALLATION MANUAL CTA-30RK-550 Rack Mount Distribution Amplifier 1 PACKAGE CONTENTS This package contains: One CTA-30RK-550 Rack Mount Distribution Amplifier One CTA-30RK-550 instruction manual PRODUCT
More informationThe BT87 also offers high gain. This allows the operator to hold existing amplifier locations during system upgrades thereby reducing system costs.
BT87 870 MHz Amplifier STARLINE Series Motorola s STARLINE series amplifier, model BT87*/*, leads the industry in features and performance and is designed to meet the needs of today's expanding broadband
More informationRMS216. 2x16 Rackmount GNSS Splitter Order online today at TECHNICAL PRODUCT DATA SHEET
TECHNICAL PRODUCT DATA SHEET RMS216 2x16 Rackmount GNSS Splitter DESCRIPTION The RMS216 amplifies and splits the GPS/GNSS signal. It includes dual input ports and 16 output ports. The dual input ports
More informationGainMaker High Output HGBT System Amplifier 5-40/ MHz
RF Electronics GainMaker High Output HGBT System Amplifier 5-40/52-1002 MHz Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of
More informationGS7000 and GainMaker Reverse Segmentable Node bdr Digital Reverse 2:1 Multiplexing System
GS7000 and GainMaker Reverse Segmentable Node bdr Digital Reverse 2:1 Multiplexing System The bdr Digital Reverse 2:1 Multiplexing System expands the functionality of the GS7000 and GainMaker Reverse Segmentable
More informationRF LINK 750 MHz FLAMETHROWER MINI-BRIDGER
APPLICATION The Flamethrower Mini-Bridger (FTMB) station provides a multi-port 5-1000 MHz platform to support a family of plug-in amplifier modules and associated accessories. Used in bridger applications,
More informationAC1000 AMPLIFIER & OPTICAL NODE PLATFORM
Broadband Cable Networks / Kari Mäki February 6, 2008 1(11) AC1000 AMPLIFIER & OPTICAL NODE PLATFORM The AC1000 is a single active output amplifier with 29 or 39 of platforms. Both platforms can be used
More informationAC8000 FIBRE OPTIC PLATFORM
Kari Mäki 5.5.2008 1(7) AC8000 FIBR PTIC PLATFRM The AC8000 is a dual active output node. It is based on fixed platform but flexible modular solution. There is possible to have an optical receiver with
More informationSubminiature, Low power DACs Address High Channel Density Transmitter Systems
Subminiature, Low power DACs Address High Channel Density Transmitter Systems By: Analog Devices, Inc. (ADI) Daniel E. Fague, Applications Engineering Manager, High Speed Digital to Analog Converters Group
More informationCXE202 UNIVERSAL AMPLIFIER
Broadband Cable Networks / Kari Mäki June 14, 2010 1(7) CXE202 UNIVERSAL AMPLIFIER The CXE202 is a dual output amplifier. It has two gain modes in one product. Gain can be selected on the field according
More informationEnd of Life. Headend Optics Platform (HLP) SPL7210S/A. HL2 Series SUPRALink High Density DWDM Transmitter FEATURES PRODUCT OVERVIEW. arris.
arris.com Headend Optics Platform (HLP) SPL7210S/A HL2 Series SUPRALink High Density DWDM Transmitter FEATURES Compact size enables 20 DFB modules to fit in a 3RU platform DWDM technology optimizes HFC
More informationADVANCED SYSTEM DESIGN PRODUCT SPECIFICATIONS BT*/* STARLINE Broadband Telecommunications Amplifier
BT*/* STARLINE Broadband Telecommunications Amplifier FEATURES OF THE BT*/*: 750 MHz or 870 MHz power doubling technology in enhanced GaAs (E-GaAs) or silicon High gain (40 db operational) Five diplex
More informationC-Band Redundant LNA Systems
C-Band Redundant LNA Systems LRC-1000 Series Introduction Redundant LNA systems minimize system downtime due to LNA failure by providing a spare LNA and an automatic means of switching to the spare upon
More informationPrisma II Optical Receivers
Optoelectronics Prisma II Optical s Description The Prisma II optical network is an advanced transmission system designed to optimize network architectures and increase reliability, scalability, and cost
More informationGainMaker Optoelectronic Node 1 GHz with 40/52 MHz Split and RF Redundancy
Optoelectronics GainMaker Optoelectronic Node 1 GHz with 40/52 MHz Split and RF Redundancy Description The GainMaker Node is designed to serve as the cornerstone of today s emerging fiber deeper network
More informationWaveReady Multi-Degree Reconfigurable Optical Add/Drop Multiplexer WRS-05AD1C00B
WaveReady Multi-Degree Reconfigurable Optical Add/Drop Multiplexer WRS-05AD1C00B www.lumentum.com Data Sheet The flexible, powerful WaveReady Reconfigurable Optical Add/Drop Multiplexer (ROADM) node wavelength
More informationCXE180 UNIVERSAL AMPLIFIER
Kari Mäki 14.6.2010 1(5) CXE180 UNIVERSAL AMPLIFIER The CXE180 is a compact dual output amplifier. It has two gain modes in one product. Gain can be selected on the field according to wanted operation.
More informationAC500 AMPLIFIER PLATFORM
Broadband Cable Networks / Kari Mäki March 18, 2004 1(6) AC500 AMPLIFIER PLATFORM The AC500 is a single active output amplifier with 39 of gain. The amplifier can be used as in distribution purposes in
More informationCisco 1218 MHz GainMaker High Gain Dual (HGD) System Amplifier
Data Sheet Cisco 1218 MHz GainMaker High Gain Dual System Amplifier Consumer bandwidth demand continues to grow at a rapid rate every year. As a result, cable operators with DOCSIS-based equipment will
More informationRedundant LNA Systems
< 1:1 LNA Plate Assembly with RCP2-1100 LNA PLATE Compact plate assemblies facilitate convenient antenna hub mounting Standard feed orientations State-of-the-art noise temperatures provided by Paradise
More informationModel 6944 and 6940 Node bdr Digital Reverse 4:1 Multiplexing System designed for Prisma II Platform
Optoelectronics Model 6944 and 6940 Node bdr Digital Reverse 4:1 Multiplexing System designed for Prisma II Platform Description The bdr Digital Reverse 4:1 Multiplexing System expands the functionality
More informationAC2000 AMPLIFIER PLATFORM
Broadband Cable Networks / Kari Mäki June 26, 2008 1(6) 2000 AMPLIFIER PLATFORM The 2000 is a dual active output amplifier with 2 x 39 of gain. The input and output amplifier stages are both based on high
More informationD3.1 / CCAP Compliant. 1.2 GHz. SignalOn Series. Forward Path Amplifier Products. Installation & Operation Manual
SignalOn Series D3.1 / CCAP Compliant 1.2 GHz Forward Path Amplifier Products Installation & Operation Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary,
More informationGainMaker High Output Reverse Segmentable Node with 40/52 MHz Split
Data Sheet GainMaker High Output Reverse Segmentable Node with 40/52 MHz Split The GainMaker High Output Reverse Segmentable (RS) Node is designed to serve as an integral part of today s network architectures.
More informationOptiva OTS-2 18 GHz Amplified Microwave Band Fiber Optic Links
MHz to 18 GHz Amplified Microwave Transport System The Optiva OTS-2 18 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the MHz to 18 GHz frequency range
More informationKeysight Technologies PNA Family Microwave Network Analyzers
Keysight Technologies PN Family Microwave Network nalyzers (N522x/3x/4x) Configuration Guide The -models of the PN family (N522x/3x/4x) will be discontinued June 2019. Their -model replacements are available
More informationAir Band Multicoupling Products MHz MHz
Air Band Multicoupling Products 118-137 MHz 225-400 MHz AFL Proposal Page: 1 of 12 Air Band Cavity Filters Key Features Low Insertion Loss Easy to install 19 Rack Mount High isolation TX-TX MTBF > 500,000
More information4 channel low power Active DAS tray with power monitoring and attenuation control (+18dBm maximum average
Active DCC Brochure DCC500 Series Products DAS Control Rack (DCR) A broadband active multi-channel device with programmable uplink/downlink variable attenuators and RMS power monitors for remote or local
More informationFlex Max. RF Amplifiers FM601e T/B. 1 GHz Trunk and Bridger Amplifiers FEATURES PRODUCT OVERVIEW. arris.com
arris.com Flex Max RF Amplifiers FM601e T/B 1 GHz Trunk and Bridger Amplifiers FEATURES Simplify plant upgrades with modular RF design Improve amplifier reach with optional GaN technology and increased
More informationHFC. Enhance. QFHPN High Power Optical Node with AGC Installation & Operation Guide
HFC Enhance QFHPN High Power Optical Node with AGC Installation & Operation Guide Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to make
More informationMODEL BTN GHz OPTICAL NODE STARLINE SERIES
MODEL BTN100 1 1 GHz OPTICAL NODE STARLINE SERIES The BTN100 optical node complements evolving fiber-deep networks by providing operators with a low cost amplifier to node drop in conversion with flexibility
More informationHDO907 CATV FIBRE TRANSMITTER
Timo Rantanen 18.2.2015 1(6) HDO907 CATV FIBRE TRANSMITTER HDO907 is a high performance, linear and directly modulated DFB laser transmitter for forward path fibre optic links in CATV and FTTx networks.
More informationHDO905 CATV FIBRE TRANSMITTER
Timo Rantanen 23.8.2011 1(6) HDO905 CATV FIBRE TRANSMITTER HDO905 is a high performance, linear directly modulated DFB laser transmitter for forward path fibre optic links in CATV and FTTx networks. The
More informationDante. Dante Network Class D Professional Audio Amplifier D-3000
Dante TM Dante Network Class D Professional Audio Amplifier D-3000 SUMMARY The D-3000 is a high power professional amplifier specially designed for the sound re-enforcement market also referred to as SR,
More informationCytec Model # 7903 Wolverine Switch Matrix CXM/256 Mainframe CYTEC PROJECT #367903
ytec Model # Wolverine Switch Matrix XM/ Mainframe YTE PROJET # ytec Model # Wolverine Switch Matrix XM/ Mainframe YTE PROJET # SET.# DESRIPTION PAGE#. General Information..............................................................
More information