RF Signal Management. RF Signal Management. Active & Passive Products* Passives: Actives:
|
|
- Gervais Austin
- 6 years ago
- Views:
Transcription
1 RF ignal Management RF ignal Management ctive & Passive Products* Passives: High density with standard F & BN connectors Patented make-before-break attenuator pad design for hitless signal balancing hassis supports both passive & active modules lear chassis door provides protection & clear view of modules lear attenuator pad covers & patented pad guides for simplified maintenance High quality, precision F or BN connectors Designed to exceed NEB requirements for grounding/bonding Independent EMI near & far-field testing One year warranty on all passive modules vailable in 1RU, 2RU, & 5RU chassis NEB Level 3 compliant Modules: RF splitting/combining Diplex filters L-Band splitters Directional couplers onditioning & monitoring ccessories 5RU hassis ctives: Operation from 50 MHz to 1 GHz Gas technology with near-100% surface mount design for high performance Meets MIL-202 specs for quality & reliability Mounts in same ignalon chassis as passive modules for maximum design flexibility Digitally variable gain & slope control for non-service-affecting signal level adjustments 20 db monitor points on both input & output signals for testing & troubleshooting Blind-mate power bus connector with gold-on-gold contacts; requires no cabling hassis-mounted -D & D-D power supply options Redundant powering with dual load shared power supplies for increased availability External +24 VD powering option One year warranty on all active modules NEB Level 3 compliant Modules: Forward amplifiers Power supplies RF switches Reverse amplifiers Passive Module with Make-Before-Break ttenuation 2RU hassis 1RU hassis 8-Position, 2 RU Powered hassis mplifier 8-Position, 2 RU Powered hassis (rear view) *Products or features contained herein may be covered by one or more U.. or foreign patents. Page 1 of 14
2 Typical Downstream onfiguration Broadband TV RF pectrum db freq L-Band atellite plitters QM modulators Receivers processors modulators RFM mplifiers plitter RFM Fiber outside plant to subscribers MT for HD, VoIP Redundant mplifiers with RF witch = ombiner = plitter = mplifier VOD servers Typical Upstream onfiguration Broadband TV RF pectrum db freq Network diagnostics/test gear QPK set-top control network Fiber plant from subscribers MT for HD, VoIP VOD servers = ombiner = plitter = mplifier Page 2 of 14
3 hassis 20-Postion, 5RU hassis 8-Postion, 2RU hassis 4-Postion, 1RU hassis Page 3 of 14
4 Passives The ignalon eries, combined with the innovative cable management of the chassis, provides engineers with a variety of products to simplify the RF signal management challenge. RF plitter/ombiner Modules - 5 MHz to 1 GHz Features: High density with standard F & BN connectors Patented make-before-break attenuator pad design for hitless signal balancing hassis supports both passive & active modules lear chassis door provides protection & clear view of modules lear attenuator pad covers & patented pad guides for simplified maintenance High quality, precision F or BN connectors Designed to exceed NEB requirements for grounding/bonding Independent EMI near & far-field testing One year warranty on all passive modules vailable in 1RU, 2RU, & 5RU chassis NEB Level 3 compliant Plain plitter/ombiner Pad and Monitor Module with Make-Before-Break ttenuation Page 4 of 14
5 Passives RF plitter/ombiner Modules - 5 MHz to 1 GHz (cont d) Page 5 of 14
6 Passives RF plitter/ombiner Modules - 5 MHz to 1 GHz (cont d) Page 6 of 14
7 Passives Directional oupler Modules - 5 MHz to 1 GHz Directional oupler Diplex Filter Modules Features: Diplex filter modules conveniently separate or combine the forward & reverse path frequency bands so that the respective signals can then be routed to the appropriate downstream, or upstream transmission equipment Two frequency options to choose from 5-65/ MHz (Int l), or 5-42/ MHz (Domestic) Three circuits housed a single module -100 db EMI Isolation -70 db ircuit to ircuit Isolation Diplex Filter Page 7 of 14
8 Passives onditioning & Monitor Modules Features: Typically placed at the input to the forward path optical transmitter, this module allows for conditioning & grooming of the RF signal gain & slope. It is designed as 1:1 input to output with two MBB circuits in series for pad & EQ placement. -20 db front facing monitor port NEB Level 3 compliant Triple & M with F-onnectors Functional chematic Page 8 of 14
9 Passives L-Band atellite plitter Modules MHz to 2.15 GHz The L-Band series satellite splitter modules are engineered for high performance in the 950 MHz to 2.15 GHz frequency range. These plain splitter/combiner modules feature dual port power-passing capability for powering LNB s. ll L-Band modules are available with precision F or BN connectors, and are NEB Level 3 compliant. L-Band atellite plitter L-Band atellite plitter (rear view) Functional chematics Page 9 of 14
10 ctives Forward Path mplifier Modules Forward Path mplifier pecifications mplifier Page 10 of 14
11 ctives Power upply Modules Power upply pecifications Power upply Page 11 of 14
12 ctives RF witch Modules The ignalon RF witch Module (RFM) is designed for use with the ignalon 8-position, or 20-position powered chassis. ll RF connections to the switch are made through standard 75 Ohm BN, or F connectors on the rear of the module. ll operating controls & indicators are located on the front panel with configuration controls located on the rear of the module. The primary function of the module is to monitor the RF signal gain of the operating primary input, and switch to the backup B input if the gain of the primary path rises, or falls below the pre-set customer selected threshold. hould the input side go above, or fall below the threshold of the unit, the RFM will rapidly switch the input from the failed input to the secondary input. This switch usually is less that 10 milliseconds. witch status, failure LED, & RF level bar graphs are mounted on the front panel of the switch module. witching threshold: +/- 3 db or +/- 6 db, & alarm contact closures are located on the rear of module. Features: ontinuous monitoring of primary & secondary Detects both high & low power failures User-selectable switching threshold: +/- 3 db or +/- 6 db Fail-over switching time < 10 ms utomatic switchback after path is restored Front-panel LED status & dual power level displays larm contact for remote failure monitoring vailable in BN & F-connector configurations ingle or dual modules Easily configured for redundancy or -B switch applications Front panel bar graph display provides indication of RF power & switching threshold Indication of switch status provided by front panel LED & rear terminal block contacts Easily configured switching threshold levels via rear DIP switch One-step calibration uto switch-back feature to primary input Built-in delay to prevent from false switching utomatic or manual modes of operation NEB Level 3 compliant Dual RF witch Page 12 of 14
13 ctives Reverse Path mplifier Modules The Return Path mplifier was designed specifically to solve problems particular to your environment. Providing greater density, unparalleled cable management, greater functionality & redundant powering, the return path amplifier is part of the system approach to integrating all signal management functions in a common format & modular system. To mount modules in ignalon chassis use these amplifiers in conjunction with N--BRKT-R (mounts 1 or 2 amps) see page 14. Features: Fixed 22 db Low distortion characteristics Low noise figure MHz bandwidth Two 20 db monitor ports (input & output) BN or F connectors or D powering Power redundancy (optional) Reverse Path mplifier Page 13 of 14
14 ccessories IO 9001 REGITERED Printed in anada lements Road West, jax, ON L1 7H4 anada Tel (905) Toll Free (800) Fax (905) Toll Free Fax (866) Page 14 of 14 Rev. 02/10 (NW0840)
SignalOn Series. RF Signal Management. Active & Passive Products* Passives: Actives:
RF ignal Management ctive & Passive Products* Passives: High density with standard F & BN connectors Patented make-before-break attenuator pad design for uninterruptible signal balancing hassis supports
More informationD3.1 / CCAP Compliant. 1.2 GHz. Make-Before-Break (MBB) Splitter/Combiner Module Specifications
RF Signal Management Passive Products Features: D. / CCAP Compliant. GHz RU Chassis (front view) Available in -00 MHz (equalized) or - MHz (non-equalized) High passive isolation to support CCAP/D. Plain
More informationSignalOn Series. Passive Modules Splitter/Combiner Modules. Features. Specifications Make-Before-Break (MBB) Splitter/ Combiner Module. 1.
SignalOn Series Passive Modules Splitter/Combiner Modules RU Chassis (front view) Features Available in -00 MHz (equalized) or - MHz (nonequalized) High passive isolation to support CCAP /D. Plain versions
More informationSignalOn Series. RF Passive Modules INSTALLATION & OPERATION MANUAL. 1.2 GHz. D3.
SignalOn Series D./CCAP Compliant. GHz RF Passive Modules INSTALLATION & OPERATION MANUAL www.atxnetworks.com www.atxnetworks.com Although every effort has been taken to ensure the accuracy of this document
More informationQ-SERIES Power. BAQ-UP (QRED) Redundancy Switch with Backup Amplifier INSTALLATION & OPERATION MANUAL.
D INUE T N O S DI Q-SERIES Power BAQ-UP (QRED) Redundancy Switch with Backup Amplifier INSTALLATION & OPERATION MANUAL www.atxnetworks.com www.atxnetworks.com Although every effort has been taken to ensure
More informationD3.1 / CCAP Compliant
Patented U.S.# 7,142,414 Ultra-dense Active Products D3.1 / CCAP Compliant (front view) Combiners: : Active 8-way combiner with 2-way output splitter intended for status monitoring port Up to 20 s will
More informationQ-SERIES. Amplifiers. QPAIR Redundancy Switch Amplifier System. Installation & Operation Manual
Q-SERIES Amplifiers QPAIR Redundancy Switch Amplifier System Installation & Operation Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice,
More informationUltra-Dense RF & Optical Active Modules Combiners
Ultra-Dense & Optical Active Modules Combiners Patented U.S.# 7,142,414 (front view) Active 8-way combiner with 2-way output splitter intended for status monitoring port Up to 20 s will fit into a single
More informationRSS-2R RF-Broadband Automatic Switch The RSS-2R is a Broadband Automatic Switch, designed for the redundancy of CATV feeds in Headend and Hub sites. It monitors the RF Broadband feeds of the main and backup
More informationQ-SERIES. Optical. QFQR 200A-04 Series Return Path Optical Receiver. Installation & Operation Manual
Q-SERIES Optical QFQR 200A-04 Series Return Path Optical Receiver Installation & Operation Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary, without
More informationModel 6942 Four Port Optoelectronic Node 870 MHz with 42/54 MHz Split
Optoelectronics Model 6942 Four ort Optoelectronic Node 870 MHz with 42/54 MHz Split Description The Model 6942 Node is a high performance, four output optoelectronic node. The Model 6942 Node can be configured
More informationModel 6940 Four Port Optoelectronic Node 870 MHz with 42/54 MHz Split
Optoelectronics Model 6940 Four ort Optoelectronic Node 870 MHz with 42/54 MHz Split Description The Model 6940 Node is a high performance, four output optoelectronic node. The Model 6940 Node can be configured
More informationMNRS Redundant RF Detector/Switch Module
Pat. #s U.S. 6,842,348; 7,043,236; Cdn. 2,404,840; 2,404,844 D3.1 / CCAP Compliant MNRS Redundant RF Detector/Switch Module Installation & Operation Manual Although every effort has been taken to ensure
More informationD3.1/CCAP Compliant HFC. Enhance. C-Cor HECE1G 1GHz Line Extender (with AGC) INSTALLATION & OPERATION MANUAL.
HFC Enhance D3.1/CCAP Compliant C-Cor HECE1G 1GHz Line Extender (with AGC) INSTALLATION & OPERATION MANUAL www.atxnetworks.com www.atxnetworks.com Although every effort has been taken to ensure the accuracy
More informationGainMaker High Output Node 5-40/ MHz
Optoelectronics GainMaker High Output Node 5-40/52-1002 MHz Description The GainMaker High Output Node is designed to serve as an integral part of today s network architectures, and combines the superior
More informationModel 6940 Collector/Terminator Three Port Unbalanced Optoelectronic Node 870 MHz with 65/86 MHz Split
Optoelectronics Model 6940 Collector/Terminator Three ort Unbalanced Optoelectronic Node 870 MHz with 65/86 MHz Split Description The Model 6940 Collector/Terminator Node is a three port unbalanced node
More informationSignalOn Series WHITE PAPER. Impact of CCAP on RF Management Isolation. Pat. #s U.S. 6,842,348; 7,043,236; Cdn. 2,404,840; 2,404,844
SignalOn Series Pat. #s U.S. 6,84,48; 7,04,6; Cdn.,404,840;,404,844 D. / CCAP Compliant Impact of CCAP on RF Management Isolation Although every effort has been taken to ensure the accuracy of this document
More informationPrisma II 1310 nm High Density Transmitter and Host Module
Optoelectronics Prisma II 1310 nm High Density Transmitter and Host Module Description The Prisma II optical network is an advanced transmission system designed to optimize network architecture and increase
More informationMODEL BLN GHz FIBER DEEP NODE STARLINE SERIES
MODEL BLN100 1 1 GHz FIBER DEEP NODE STARLINE SERIES The BLN100 optical node is an essential building block in evolving Hybrid Fiber Coaxial (HFC) network architectures enabling amplifier to node conversions.
More informationCompact Model Fiber Deep Node 862 MHz with 42/54 MHz Split
Optoelectronics Compact Model 90090 Fiber Deep Node 862 MHz with 42/54 MHz Split Description The Scientific-Atlanta Compact Model 90090 Fiber Deep Node is a small, low-cost, 110V AC powered node that addresses
More informationPrisma II 1310 nm High Density Transmitter and Host Module
Optoelectronics Prisma II 13 nm High Density Transmitter and Host Module Description The Prisma II optical network is an advanced transmission system designed to optimize network architecture and increase
More informationINSTALLATION MANUAL. CTA-30RK-550 Rack Mount Distribution Amplifier
INSTALLATION MANUAL CTA-30RK-550 Rack Mount Distribution Amplifier 1 PACKAGE CONTENTS This package contains: One CTA-30RK-550 Rack Mount Distribution Amplifier One CTA-30RK-550 instruction manual PRODUCT
More information1550nm external modulated optical transmitter operating manual
1550nm external modulated optical transmitter operating manual Table of Contents Table of Contents...- 1 - Safety Instruction...- 2-1. Overview... - 3-1.1 About This Manual... - 3-1.2 Product Description...
More informationGainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split
Optoelectronics GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split Description The GainMaker Node is designed to serve as the cornerstone of today s emerging fiber deeper network architectures. The
More information70/140 MHz IF Fiber Optic Link
70/140 MHz IF Fiber Optic Link Product Description Features & Benefits IF-Band: 10 200 MHz Up to 10Km distance Powerful management capabilities via a front panel LCD and rack mounted SNMP 1550nm and CWDM
More informationYour one stop source for RF transmission in Cable and IPTV Headends Teleports and Broadcasting Satellite Ground Stations Satellite Operators
RF over Fiber Guide WE HAVE A PASSION......FOR OPTICAL SIGNALS Your one stop source for RF transmission in Cable and IPTV Headends Teleports and Broadcasting Satellite Ground Stations Satellite Operators
More informationCCAP Compliant. Discontinued
CCAP Compliant MPTX8 Optical Transmitter Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to make amendments or correct omissions.
More informationOpti Max Optical Node Series
arris.com Opti Max Optical Node Series OM6000 1.2 GHz 4x4 HFC Segmentable Node FEATURES Supports 1.2 GHz Downstream and 204 MHz Upstream bandpass for DOCSIS 3.1 migration Integrated segmentation switches
More informationCompact Nodes and 90071
Fiber ptics Compact Nodes 90070 and 90071 Dedicated ptimized Nodes The 90070 receiver node is designed for long distance trunk applications to feed architectures of any density. Dual output with enhanced
More informationGainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split
Optoelectronics GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split Description The GainMaker Node is designed to serve as the cornerstone of today s emerging fiber deeper network architectures. The
More informationX-Band Redundant LNA Systems
X-Band Redundant LNA Systems LRX-1000 Series Introduction Redundant LNA systems minimize system downtime due to LNA failure by providing a spare LNA and an automatic means of switching to the spare upon
More informationAC GHZ DISTRIBUTION AMPLIFIER
23.5.2016 1(8) C1500 1.2 GHZ DISTRIBUTION MPLIFIER Technical specifications Parameter Specification Note Downstream signal path (values with diplex filters) Frequency range 85...1218 MHz Return loss 20
More informationCompact Node Optoelectronics
ptoelectronics Compact Node 90075 Description The Compact Model 90075 Node is Scientific-Atlanta s latest addition to its family of Compact nodes. The node offers maximized coverage for network designs
More informationDownstream signal path (values with diplex filters) Upstream signal path (values with diplex filters)
PRODUT SPEIFITION 3210 3.11.2016 1 ( 7 ) Technical specifications Paramete Specification Note Downstream signal path (values with diplex filters) Frequency range 85...1218 MHz Return loss 20 db 1) Maximum
More informationAC9000 INTELLIGENT FIBRE OPTIC PLATFORM
Kari Mäki 20.12.2012 1(7) 9000 INTLLIGNT FIBR PTIC PLATFRM Features The 9000 is an intelligent 4 output optical node of x product family. It is based on fixed platform but flexible modular solution, supporting
More informationPrisma II Multi-Wavelength High Density Transmitter
Prisma II Multi-Wavelength High Density Transmitter Increasing customer demands for advanced services and competitive pressures are causing HFC network operators to consider strategic options. One popular
More informationModel 6944 and 6940 Node bdr Digital Reverse 4:1 Multiplexing System designed for Prisma II Platform
Optoelectronics Model 6944 and 6940 Node bdr Digital Reverse 4:1 Multiplexing System designed for Prisma II Platform Description The bdr Digital Reverse 4:1 Multiplexing System expands the functionality
More informationGainMaker Low Gain Dual System Amplifier 1 GHz with 55/70 MHz Split
RF Electronics GainMaker Low Gain Dual System Amplifier 1 GHz with 55/70 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent
More informationC-Band Redundant LNA Systems
C-Band Redundant LNA Systems LRC-1000 Series Introduction Redundant LNA systems minimize system downtime due to LNA failure by providing a spare LNA and an automatic means of switching to the spare upon
More informationThe New Standard in High Power Redundant Microwave Amplifier Systems Has Arrived
The New Standard in High Power Redundant Microwave Amplifier Systems Has Arrived FEATURES Output Power levels of: 8.0 kw in C-Band 6.6 kw in X-Band.5 kw in Ku-Band No Active Switching-All Passive Power
More informationPrisma II 1 GHz 1550 nm Transmitters
Optoelectronics Prisma II 1 GHz 1550 nm Transmitters Description The Prisma II optical network is an advanced transmission system designed to optimize network architectures and increase reliability, scalability,
More informationAC9000 INTELLIGENT FIBRE OPTIC PLATFORM
Kari Mäki 4.4.2012 1(7) 9000 INTLLIGNT FIBR PTIC PLATFRM Features The 9000 is an intelligent 4 output optical node of x product family. It is based on fixed platform but flexible modular solution, supporting
More informationOptiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links
2 GHz to 4 GHz Amplified Microwave Transport System The Optiva OTS-2 4 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 5 MHz to 4 GHz frequency range
More informationOptiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links
5 MHz to 4 GHz Amplified Microwave Transport System The Optiva OTS-2 4 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 5 MHz to 4 GHz frequency range
More informationMaintenance Manual LBI-38531G MHz, 110 WATT POWER AMPLIFIER 19D902797G1 DESCRIPTION TABLE OF CONTENTS
Maintenance Manual LBI-38531G 136-174 MHz, 110 WATT POWER AMPLIFIER 19D902797G1 TABLE OF CONTENTS Page DESCRIPTION.............................................. Front Cover SPECIFICATIONS.................................................
More informationGainMaker Unbalanced Triple System Amplifier 870 MHz with 40/52 MHz Split
RF Electronics GainMaker Unbalanced Triple System Amplifier 870 MHz with 40/52 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent
More information750 MHz Magnamax series
750 MHz Magnamax series MLE3007RMLE Magnamax Line Extender (Legacy RMLE style) Description: The 750 MHz Magnamax series broadband line extender is essentially a drop-in-upgrade module that allows the customer
More informationAC8000 FIBRE OPTIC PLATFORM
Kari Mäki 5.5.2008 1(7) AC8000 FIBR PTIC PLATFRM The AC8000 is a dual active output node. It is based on fixed platform but flexible modular solution. There is possible to have an optical receiver with
More informationThe New Standard in High Power Redundant Microwave Amplifier Systems Has Arrived
GaN MAX The New Standard in High Redundant Microwave Amplifier Systems Has Arrived FEATURES Gallium Nitride amplifiers, offering better power over frequency Output levels of up to: 10 kw in S-, C- and
More informationCisco GainMaker High Output High Gain Balanced Triple 1 GHz System Amplifier 5-85/ MHz
Data Sheet Cisco GainMaker High Output High Gain Balanced Triple 1 GHz System Amplifier 5-85/102-1002 MHz Consumer bandwidth demand continues to grow at a rapid rate every year. As a result, cable operators
More informationOPTICAL NODE TRUNK & DISTRIBUTION
OPTICAL NODE TRUNK & DISTRIBUTION OPTI 100RX - OPTI 200RX - OPTI 300RX Version 2 Page 1 OPTI INTRODUCTION OPTI is a broadband distribution node designed to be used as a compact, multiport optical node
More informationThe New Standard in High Power Redundant Microwave Amplifier Systems Has Arrived
GaN MAX The New Standard in High Redundant Microwave Amplifier Systems Has Arrived FEATURES Gallium Nitride amplifiers, offering better power over frequency Output levels of up to: 10 kw in S-, C- and
More informationGainMaker High Output Reverse Segmentable Node with 40/52 MHz Split
Data Sheet GainMaker High Output Reverse Segmentable Node with 40/52 MHz Split The GainMaker High Output Reverse Segmentable (RS) Node is designed to serve as an integral part of today s network architectures.
More informationUnderstanding and Troubleshooting Linear Distortions: Micro-reflections, Amplitude Ripple/Tilt and Group Delay
Understanding and Troubleshooting Linear Distortions: Micro-reflections, Amplitude Ripple/Tilt and Group Delay RON HRANAC 1 A Clean Upstream: Or Is It? Graphic courtesy of Sunrise Telecom 2 Transmission
More informationGainMaker Unbalanced Triple System Amplifier 1 GHz with 42/54 MHz Split
Optoelectronics GainMaker Unbalanced Triple System Amplifier 1 GHz with 42/54 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent
More informationModel 6944 Four Port Optoelectronic Node 870 MHz with 42/54 MHz Split
Optoelectronics Model 6944 Four t Optoelectronic Node 870 MHz with 42/54 MHz Split Description The Model 6944 Node is Scientific-Atlanta s latest generation 870 MHz optical node platfm. This platfm allows
More informationGainMaker High Gain Balanced Triple System Amplifier 1 GHz with 40/52 MHz Split
RF Electronics GainMaker High Gain Balanced Triple System Amplifier 1 GHz with 40/52 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the
More information4 channel low power Active DAS tray with power monitoring and attenuation control (+18dBm maximum average
Active DCC Brochure DCC500 Series Products DAS Control Rack (DCR) A broadband active multi-channel device with programmable uplink/downlink variable attenuators and RMS power monitors for remote or local
More informationGS7000 and GainMaker Reverse Segmentable Node bdr Digital Reverse 2:1 Multiplexing System
GS7000 and GainMaker Reverse Segmentable Node bdr Digital Reverse 2:1 Multiplexing System The bdr Digital Reverse 2:1 Multiplexing System expands the functionality of the GS7000 and GainMaker Reverse Segmentable
More informationCXE202 UNIVERSAL AMPLIFIER
Broadband Cable Networks / Kari Mäki November 23, 2006 1(7) CXE202 UNIVERSAL AMPLIFIER The CXE202 is a dual output amplifier. It has two gain modes in one product. Gain can be selected on the field according
More informationGainMaker High Output HGBT System Amplifier 5-40/ MHz
RF Electronics GainMaker High Output HGBT System Amplifier 5-40/52-1002 MHz Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of
More informationRF Components Product Catalogue
RF Components Product Catalogue Government and Defence Broadcast Marine, Oil and Gas SNG and VSAT RF Engineering by Design Contents Splitters / Combiners Active Splitters and Combiners Page 3 Passive Splitters
More informationGainMaker Line Extender 1 GHz with 42/54 MHz Split
RF Electronics GainMaker Line Extender 1 GHz with 42/54 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today s
More informationHFC. Enhance. QFHPN High Power Optical Node with AGC Installation & Operation Guide
HFC Enhance QFHPN High Power Optical Node with AGC Installation & Operation Guide Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to make
More informationFIBER OPTIC INTERFACILITY PLATFORMS
FIBER OPTIC INTERFACILITY PLATFORMS John A. MacDonald and Allen Katz Linear Photonics, LLC Nami Lane, Suite 7C, Hamilton, NJ 869 69-584-5747 macdonald@linphotonics.com LINEAR PHOTONICS, LLC Bringing Performance
More informationMODEL BTN GHz OPTICAL NODE STARLINE SERIES
MODEL BTN100 1 1 GHz OPTICAL NODE STARLINE SERIES The BTN100 optical node complements evolving fiber-deep networks by providing operators with a low cost amplifier to node drop in conversion with flexibility
More informationMT3200A TRAVELING WAVE TUBE MEDIUM POWER AMPLIFIER
ISO 9001 MODEL MT3200A TRAVELING WAVE TUBE MEDIUM POWER AMPLIFIER MT3200A TRAVELING WAVE TUBE MEDIUM POWER AMPLIFIER FOR SATELLITE FOR SATELLITE UPLINK UPLINK APPLICATIONS C-BAND: 400W X-BAND: 400W Ku-BAND:
More informationGainMaker Optoelectronic Node 1 GHz with 40/52 MHz Split and RF Redundancy
Optoelectronics GainMaker Optoelectronic Node 1 GHz with 40/52 MHz Split and RF Redundancy Description The GainMaker Node is designed to serve as the cornerstone of today s emerging fiber deeper network
More informationPrisma II Optical Receivers
Optoelectronics Prisma II Optical s Description The Prisma II optical network is an advanced transmission system designed to optimize network architectures and increase reliability, scalability, and cost
More informationDiamond Line 3 Single Output Amplifiers
Diamond Line 3 Single Output Amplifiers About this Section In this section, you will find the following reference information about the Diamond Line 3 single output amplifiers: Item...Page Equipment Description...9
More informationAC500 AMPLIFIER PLATFORM
Broadband Cable Networks / Kari Mäki March 18, 2004 1(6) AC500 AMPLIFIER PLATFORM The AC500 is a single active output amplifier with 39 of gain. The amplifier can be used as in distribution purposes in
More informationCXE202 UNIVERSAL AMPLIFIER
Broadband Cable Networks / Kari Mäki June 14, 2010 1(7) CXE202 UNIVERSAL AMPLIFIER The CXE202 is a dual output amplifier. It has two gain modes in one product. Gain can be selected on the field according
More informationAC1000 AMPLIFIER & OPTICAL NODE PLATFORM
Broadband Cable Networks / Kari Mäki February 6, 2008 1(11) AC1000 AMPLIFIER & OPTICAL NODE PLATFORM The AC1000 is a single active output amplifier with 29 or 39 of platforms. Both platforms can be used
More informationGainMaker Line Extender 1 GHz with 65/86 MHz Split
RF Electronics GainMaker Line Extender 1 GHz with 65/86 MHz Split Description The GainMaker Broadband Amplifier Platform includes a variety of RF amplifiers that address the divergent needs of today s
More informationOptiva OTS-2 18 GHz Amplified Microwave Band Fiber Optic Links
MHz to 18 GHz Amplified Microwave Transport System The Optiva OTS-2 18 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the MHz to 18 GHz frequency range
More informationALX. 870 MHz Line Extender
ALX 870 MHz Line Extender Overview ALX 870 MHz 15 amp series of broadband RF amplifiers provide high quality RF distribution for fiber to fiber, HFC (hybrid fiber coaxial), or PDN (power domain node) architectures.
More informationPrisma II 1 GHz SuperQAM Full Spectrum Transmitter
Prisma II 1 GHz SuperQAM Full Spectrum Transmitter The Prisma II optical networks allow for best in class architectures with increased reliability, scalability, and cost-effectiveness. The Prisma II 1
More informationACI SDLA. Miniflex Line Extender 1002 MHz
ACI SDLA Miniflex Line Extender 1002 MHz Overview SDLA 1002 MHz 15 amp series of broadband RF amplifiers provide high quality RF distribution for fiber-to fiber, HFC (hybrid fiber coaxial), or PDN (power
More informationCisco 1218 MHz GainMaker High Gain Dual (HGD) System Amplifier
Data Sheet Cisco 1218 MHz GainMaker High Gain Dual System Amplifier Consumer bandwidth demand continues to grow at a rapid rate every year. As a result, cable operators with DOCSIS-based equipment will
More informationD3.1 / CCAP Compliant. 1.2 GHz. SignalOn Series. Forward Path Amplifier Products. Installation & Operation Manual
SignalOn Series D3.1 / CCAP Compliant 1.2 GHz Forward Path Amplifier Products Installation & Operation Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary,
More informationRedundant LNA Systems
< 1:1 LNA Plate Assembly with RCP2-1100 LNA PLATE Compact plate assemblies facilitate convenient antenna hub mounting Standard feed orientations State-of-the-art noise temperatures provided by Paradise
More informationGS7000 & GainMaker Reverse Segmentable Node bdr Digital Reverse 2:1 Multiplexing System
Optoelectronics GS7000 & GainMaker Reverse Segmentable Node bdr Digital Reverse 2:1 Multiplexing System Description The bdr Digital Reverse 2:1 Multiplexing System expands the functionality of the Scientific-Atlanta
More informationGainMaker 1 GHz High Output 4-Port Node with 40/52 MHz Split
Data Sheet GainMaker 1 GHz High Output 4-Port Node with 40/52 MHz Split The Cisco GainMaker High Output 4-Port Node with 40/52 MHz Split is designed to serve as an integral part of today s network architectures.
More informationPrisma II 1 GHz SuperQAM Transmitter
Prisma II 1 GHz SuperQAM Transmitter The Prisma II optical networks allow for best in class architectures with increased reliability, scalability, and cost-effectiveness. The Prisma II 1 GHz SuperQAM Transmitter
More informationACI SDAF MHz Miniflex Configurable Bridger Amplifier
ACI SDAF MHz Miniflex Configurable Bridger Amplifier Overview SDAF MHz 15 amp series of broadband RF amplifiers provide high quality RF distribution for fiber-to fiber, HFC (hybrid fiber coaxial), or PDN
More informationRMS216. 2x16 Rackmount GNSS Splitter Order online today at TECHNICAL PRODUCT DATA SHEET
TECHNICAL PRODUCT DATA SHEET RMS216 2x16 Rackmount GNSS Splitter DESCRIPTION The RMS216 amplifies and splits the GPS/GNSS signal. It includes dual input ports and 16 output ports. The dual input ports
More informationFeatures and Benefits
Features and Benefits E-Option Plug-In Conditioner Conditioning at the Tap Antronix s patented E-Option conditioning multi-taps accommodate a variety of plug-in modules that provide signal conditioning
More informationCXE180 UNIVERSAL AMPLIFIER
Kari Mäki 14.6.2010 1(5) CXE180 UNIVERSAL AMPLIFIER The CXE180 is a compact dual output amplifier. It has two gain modes in one product. Gain can be selected on the field according to wanted operation.
More informationCisco Enhanced Digital Return (EDR) 85 System Compact Segmentable Nodes
Cisco Enhanced Digital Return (EDR) 85 System Compact Segmentable Nodes The Cisco Enhanced Digital Return (EDR) 85 System expands the functionality of Compact Segmentable Nodes by increasing the performance,
More informationUsing 1 GHz GainMaker Amplifiers in an 870 MHz System Application Note
Using 1 GHz GainMaker Amplifiers in an 870 MHz System Application Note Overview Introduction The move to a 1 GHz cable telecommunications system infrastructure is being driven by the increasing need for
More informationENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 48-2 2008 Test Procedure for Measuring Relative Shielding Properties of Active and Passive Coaxial Cable Devices
More informationRF LINK 750 MHz PAL LINE EXTENDER
APPLICATION ARRIS series of 750 MHz PAL Line Extenders are typically deployed in the feeder or tapped portion of the RF network. Configurable as either single or dual output devices, these amplifiers provide
More informationChromadigm CHS/CHQ Transmitter
Patented U.S.# 7,936,997 Chromadigm CHS/CHQ Transmitter QUICK START GUIDE www.atxnetworks.com www.atxnetworks.com Although every effort has been taken to ensure the accuracy of this document it may be
More informationENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 145 2013 Test Method for Second Harmonic Distortion of ives Using a Single Carrier NOTICE The Society of Cable
More information1:1 AND 1:2 REDUNDANT LOW-NOISE AMPLIFIER SYSTEMS
FEATURES Low amplifier noise temperature Fully redundant power supplies Remote control via RS485 matic/manual control from both local and remote mode Remote status Off-line input/output access Amplifier
More information1 GHz SASMAX II series
1 GHz SASMAX II series SASMAX II Line Extender (Legacy LEII style) Description: The 1 GHz SASMAX II series broadband line extender is essentially a drop-in-upgrade module that allows the customer to perform
More informationRF & Microwave Test Solutions from Pickering Interfaces
RF & Microwave Test Solutions from Pickering Interfaces Pickering Interfaces has a wide range of RF & Microwave switch modules that can be used to increase the fl exibility of Test & Measurement systems
More informationNYULMC AMBULATORY CARE CENTER FIT-OUT PHASE 1 Perkins & Will Architects PC 222 E 41st ST, NYC Project: Issued for GMP March 15, 2017
SECTION 27 41 33 PART 1 - GENERAL 1.1 SYSTEM DESCRIPTION A. Furnish and install a complete and fully operational Television Signal Distribution System capable of delivering up to 158 video channels (6
More informationFIBER OPTIC ANTENNA LINK OFW-5800/GPS. Compatible with a Wide Range of GPS Receivers Architectures. Logistically Supported with COTS Hardware
FIBER OPTIC ANTENNA LINK OFW-5800/GPS Compatible with a Wide Range of GPS Receivers Architectures Designed to Operate within the Naval Electromagnetic Environment Designed and Manufactured to Meet Naval
More informationAudio Specialties Group Products Division MAS-101 UHF Receive Antenna Combiner Operators Guide
Audio Specialties Group Products Division MAS-101 UHF Receive Antenna Combiner Operators Guide REV-4 TABLE OF CONTENTS SECTION 1:... 3 1.0 Introduction... 3 SECTION 2:... 3 Features... 3 2.1 Standard Configurations...
More information