|
|
- Lawrence Booker
- 6 years ago
- Views:
Transcription
1 M2 Series C Servo System Reliable Easy to use Fast Intelligent Safe Professional Compliant
2 Easy to Use On-line uto Tuning M2 servo system can accomplish real time response to the dynamic feedback of the load and optimize gain tuning parameters on-line automatically. This auto tuning function can greatly save debugging time and simplify the debugging procedure. These all can be done by the PC based software in only a few minutes. Before uto Tuning fter uto Tuning dvanced nti Vibration Function M2 servo system has advanced anti vibration function which include anti resonance and vibration damping. nti resonance uses two notch filters to overcome the resonance from the natural mechanical characteristic of the system. Vibration damping uses an adjustable damping ratio in the controller to improve the damping characteristic of the system, which can reduce the vibration of the system. Move to the right Deactivate vibration suppression feature Vibration Without nti vibration With nti vibration Move to the right ctivate vibration suppression feature No Vibration Intelligent Q programming, Various Industrial Field Bus Supported Pulse&Dir CW/CCW /B Quadrature 3rd Party Controller IDn ID2 ID1 Pulse Control Muti-xis Network 1V Downloading nalog Velocity Position/Torque in Motion Program Stand lone Operation nalog Control -1V Modbus/RTU CNopen Ci31 and Ci42 EtherNet/IP escl 2
3 Flexible Internal Position Table Position Table include Linear motion and Circular motion. Each Position can be triggered by the external digital inputs without the pulse & direction signals send by the motion controllers. Up to 64 points in Linear motion. Velocity, acceleration, deceleration can be set separately for each point. Up to 12 homing methods for Linear motion Up to 24 division ratios. Indexing Plate can be applied by setting the reduction gear ratio and division ratio. Easy to Use Control Panel, Friendly Tuning Software On board Control Panel Basic parameters setting and query Drive status LED display M Servo Suite tuning software Friendly interface Easy set up within just several steps Drive set up and configuration Easy to use on line auto tuning Built in oscilloscope for motion testing and monitoring Write and save SCL scripts On-line help integrated Good Response Frequency and Settling Time M2 has 2.KHz response frequency and -2ms settling time. These come from the high sample rate control algorithm, fast response velocity feed forward and torque feed forward math model and flexible filter function. These greatly shorten the system response time, improve the accuracy and efficiency. Response Frequency1 2. KHZ Gain(dB) M2 1 2 Frequency(Hz) 2.kHz 3 Velocity (rpm) In position signal out Settling time -2ms Various I/Os Two EI-422 standard high speed differential inputs Four high speed inputs, accept -24VDC, input frequency up to 2MHz with digital filters Eight general purpose inputs, -24VDC Two analog inputs Five general purpose outputs, 3VDC 3m max One motor brake control output, 3VDC 1m max Integrated Internal Regeneration bsorbing Resistor, up to 4 Watts 3
4 Servo Drive Numbering Information M2DV - 2 *** M2 Series C Servo Drive Current Code Servo Motor Numbering Information SM 4 1 E2-K CD-N N V ** Servo Motor Continuous Current (RMS) Frame Size 4-4mm 6-6mm 8-8mm Boost Current (RMS) 1D D D Voltage Code Input Voltage 2 Single/Three-Phases24VC±1%, /6Hz Motor Length W 2W 2 1W 4W 3 7W Customized Specification(If pplicable) Connections CD: 3mm (12") Shielded Cables with MP 4 Pin, 6-7 mp Motor Connector. Winding : 32 VDC(24 VC) Shaft K: Standard Keyway Feedback E4: 2 ppr Optical Encoder and SharedCommutation Tracks Communication Configuration Type Description Communication S Basic Type Q Q Type RS-232 R Q Type(Modbus/RTU Type) RS-48 Mini USB C CNopen Type CNBus E escl Type Ethernet IP EtherNet/IP Type Ethernet Customized Specification(If pplicable) Shaft Seal V: Shaft seal shipped with motor, but not placed on shaft Thermal Protector N: No Protector Brake Option N: No Brake B: 24VDC Brake Drive Dimensions(Unit:mm) 6 Ø 6 Ø Ø M2DV-1D M2DV-3D M2DV-4D 4
5 Servo Motor Dimensions(Unit:mm) h6 74 Motor Brake Feedback h6 8 Frame Size 4mm Servo Motor without Brake Motor Feedback Frame Size 4mm Servo Motor with Brake M3 8 3 h Oil seal KEY 3 h h Oil seal KEY 3 h9 -.2 Without Brake With Brake SM41E4-92 SM42E4-19 SM41E4-129 SM42E4-147 Frame Size 6mm Servo Motor without Brake Frame Size 6mm Servo Motor with Brake Motor Feedback Motor Brake Feedback h ± 3 ± M h Key h h ± 3 ± 3 ± M h9 -.3 Key 14 h oil seal ±1 ± oil seal ±1 ±1 口 Without Brake With Brake SM61E4-1 SM62E4-118 SM61E4-14 SM62E4-18 Frame Size 8mm Servo Motor without Brake Frame Size 8mm Servo Motor with Brake Motor Feedback Motor Brake Feedback.4 7 h ± 3 ± M h ± 3 ± 3 ± M h h Oil seal 3 ±.2 4 ±1 9. ± KEY 6 h9 -.3 Oil seal 3 ±.2 4 ±1 9. ± KEY 6 h9 -.3 Without Brake With Brake SM83E4-131 SM83E4-178
6 System Configuration C Power Non Fuse Breaker LED Display The digit,7 segment LED displays the diver status and faults. Operation Panel Function keys are used to perform status display,monitor and diagnostic,function and parameter setting. USB communication Port (CN1) Electromagnetic Contactor Main Power Input Control Power Input PLC Motion Control Card Regeneration bsorbing Resistor Motor Power Cable I/O Interface Used to connect PLC,motion card and other controllers. Motor Feedback Cable CNBus, RS-48, Ethernet Communication Port 6
7 Specification and Ordering Information W 1W 2W 4W 7W 2ppr Increment Encoder Without Brake With Brake SM41E4- SM41E4- SM42E4- SM42E4- SM61E4- SM61E4- SM62E4- SM62E4- SM83E4- SM83E4- Rated Speed (RPM) 3 Maximum Speed (RPM) 6 Maximum Torque (N m) C Servo Motor Maximum Torque (N m) Rated Current () Maximum Current () Rotor Inertia Kg m 2 * * * * * Insulation Class Class B Protection Class Oil Seal IP6(except shaft through hole and cable end connetor) With Oil seal Pulse&Direction Type Basic Type M2DV-1D82S M2DV-1D82S M2DV-1D82S M2DV-3D2S M2DV-4D2S RS-232 Q Type M2DV-1D82Q M2DV-1D82Q M2DV-1D82Q M2DV-3D2Q M2DV-4D2Q RS-48 SCL Modbus RTU M2DV-1D82R M2DV-1D82R M2DV-1D82R M2DV-3D2R M2DV-4D2R Fieldbus Type CN CNopen M2DV-1D82C M2DV-1D82C M2DV-1D82C M2DV-3D2C M2DV-4D2C EtherNet/IP M2DV-1D82IP M2DV-1D82IP M2DV-1D82IP M2DV-3D2IP M2DV-4D2IP EtherNet escl M2DV-1D82E M2DV-1D82E M2DV-1D82E M2DV-3D2E M2DV-4D2E Rated Current () Maximum Current () Input Power C Input Single Phase 24VC ±1% /6Hz Single /Three Phase 24VC ±1% /6Hz Heat Sinking Method Natural cooling (without fan) C Servo Drive Control Signal (Digital I/O) Input Output 8 Configurable Optically isolate digital general inputs, -24VDC, max input current 2m 4 Configurable Optically isolate digital high speed inputs, -24VDC, max input current 2m Configurable optically isolated digital outputs, 3VDC, max input current 3m One motor brake control output, 3VDC 1m max Specifications nalog Signal Input Output 2 nalog inputs, DC-1V~+1V N/ Pulse Signal Input Output 2 optically isolated inputs Khz(Open collector), 2 high speed differential input 2MHz 1counts/rev,/B/Z Line Driver Communication Port USB Online uto-tuning Operation Panel Regenerative Resistor Faults & Warning digit, 7 segment LED display, 4 setting switch Build-in Over-voltage, Under-voltage, Over-current, Encoder feedback loss, Drive over temperature, Position error, Safety Function STO Environment mbient Temperature:~4 C, Humidity 1~8%, ltitude<1m, Vibration.g Certification RoHS, CE IEC 618-3: 24, IEC : 27 7
8 Optional ccessories P/N Catagory Description REG2W Regeneration bsorbing Resistor Ω 2W REG2W1 Regeneration bsorbing Resistor 1Ω 2W REGW2 Regeneration bsorbing Resistor 2Ω W REGW Regeneration bsorbing Resistor Ω W Cable M2 USB mini Cable, 1.M Cable M2 Motor Flexible Cable, 1M Cable M2 Motor Flexible Cable, 3M 162- Cable M2 Motor Flexible Cable, M Cable M2 Motor Flexible Cable, 1M Cable M2 Motor Standard Cable, 1M Cable M2 Motor Standard Cable, 3M Cable M2 Motor Standard Cable, M Cable M2 Motor Standard Cable, 1M Cable M2 Motor Brake Cable, 3M Cable M2 Encoder Flexible Cable, 1M Cable M2 Encoder Flexible Cable, 3M Cable M2 Encoder Flexible Cable, M Cable M2 Encoder Flexible Cable, 1M Cable M2 Encoder Standard Cable, 1M Cable M2 Encoder Standard Cable, 3M Cable M2 Encoder Standard Cable, M Cable M2 Encoder Standard Cable, 1M M2 Driver Kit Connector M2 driver connector set (Power supply Control Connector Encoder Connector) M2-P Connector CN2 Controller Connector M2-26P Connector CN3 Encoder Connector M2 Motor Kit Connector M2 servo motor and drive inter connector (power and encoder) Headquarters No. 168 Mingjia Road Industrial Park North Minhang District Shanghai 2117, P.R. China Tel: +86() Fax: +86() Web: ama-info@moons.com.cn Service Center MOONS' Industries (merica), Inc North Prospect venue,itasca, IL 6143 U.S.. Tel: Fax: MOONS' Industries (Europe) S.r.l. Via Torri Bianche n.1 29 Vimercate(MB) Italy Tel: Fax: MOONS' Industries (South-East sia) Pte Ltd. 33 Ubi venue 3 #8-23 Vertex Singapore Tel: Fax: MOONS Industries Japan Corporation. Room 61, 6F, Shin Yokohama Koushin Building , Shin-Yokohama, Kohoku-ku, Yokohama, Kanagawa Japan Tel: +81-() Fax: +81-() Shenzhen Branch Office Room 229, 22/F, Kerry Center, 28 Renminnan Road, Luohu District, Shenzhen 181, P.R.China Tel: +86 () Fax: +86 () Beijing Branch Office Room 816, Tower B, China Electronics Plaza, 3 Danling Street, Haidian District, Beijing 18, P.R. China Tel: +86 () Fax: +86 () Qingdao Branch Office Room E, 1th Floor, 73 Wangjiao Mansion, Hongkong Middle Road, Shinan District, Qingdao 26671, P.R. China Tel: +86 () Fax: +86 () Wuhan Branch Office Room 31, World Trade Tower, 686 Jiefang venue, Jianghan District, Wuhan 4322, P.R.China Tel: +86 () Fax: +86 () Chengdu Branch Office Room 1917, Western Tower, 19, 4th Section of South People Road, Wuhou District, Chengdu 6141, P.R.China Tel: +86 () Fax: +86 () Xi an Branch Office Room 16, Tower D, Wangzuo International City, 1 Tangyan Road, Xi an 716, P.R. China Tel: +86 () Fax: +86 () Nanjing Branch Office Room 32, Building, Tengfei Creation Center, Jiangjun Road, Jiangning District, Nanjing 2111, P.R. China Tel: +86 () Fax: +86 () Ningbo Branch Office Room 39, Tower B, Taifu Plaza, 6 Jiangjia Road, Jiangdong District, Ningbo, 314, P.R. China Tel: +86 () Fax: +86 () Guangzhou Branch Office Room 46, Tower B, China Shine Plaza, 9 Linhe Xi Road, Tianhe District, Guangzhou 161, P.R. China Tel : Fax: The model names, specifications, appearances and other details of products featured in this brochure are subject to change without notice for purposes of improvement. Please check with our sales office to confirm that the stated information is valid before you examine or order any product featured in the brochure. ISO 91 ISO 141 ISO/TS CHIN / 1ST PRINT / 24TH / PRIL / 21
Easy to Use On-line Auto Tuning. Advanced Anti Vibration Function. Intelligent Q programming, Various Industrial Field Bus Supported
M2 Series C Servo System Reliable Easy to use Fast Intelligent Safe Professional 9 Compliant Easy to Use On-line uto Tuning M2 servo system can accomplish real time response to the dynamic feedback of
More informationM2 Series. AC Servo System. Reliable Easy to use Fast Intelligent Safe Professional. Compliant
M2 Series C Servo System Reliable Easy to use Fast Intelligent Safe Professional Compliant Good Response Frequency and Settling Time 2.kHz Response Frequency1 2.KHZ Gain(dB) M2 has 2.KHz response frequency
More informationSSM. Step-Servo Motor. Integrated. Intelligent Accurate. Efficient Compact Smooth. Closed Loop. Compliant
M Integrated tep-ervo Motor Intelligent Accurate Closed Loop Compliant Efficient Compact Fast mooth Integrated tep-ervo Motor The M line of integrated step-servo motors combines servo technology with an
More informationFeatures. Anti-Resonance. Microstep Emulation. Torque Ripple Smoothing. Command Signal Smoothing. Dynamic Current Control. Self Test & Auto Setup
STM Integrated Steppers Drive Motor Controller The STM is an integrated Drive+Motor+Controller, fusing step motor and drive technologies into a single device, offering savings on space, wiring and cost
More informationNew. Closed Loop. 3rd Generation Step-Servo
RS Closed loop step system with servo control Intelligent built-in controller Efficient, smooth, accurate & fast ow vibration, low noise, low heat Enhanced motor optimized design New rd Generation Step-Servo
More informationTSM11. Integrated Step-Servo Motor. Hardware Manual. AMP & MOONS Automation
TSM11 Integrated Step-Servo Motor Hardware Manual AMP & MOONS Automation Rev: 1. Contents 1 Introduction... 4 1.1 Features...4 1.2 Block Diagram...5 1.3 Safety Instructions...6 2 Getting Started... 7 2.1
More informationSV2Dx Servo Drives SV200 Servo Drives for DC-Powered Applications
24 to 60 VDC input 10 A cont., 20 A peak output current Compact size for multi-axis applications Ideal for OEMs Designed for use with J Series motors Wide range of control options 8 regular digital inputs,
More informationNew. Closed Loop. 3rd Generation Step-Servo
RS New rd Generation Step-Servo Closed loop step system with servo control Intelligent built-in controller Efficient, smooth, accurate & fast ow vibration, low noise, low heat Enhanced motor optimized
More informationM2 Series AC Servo. User Manual SHANGHAI AMP&MOONS AUTOMATION CO.,LTD.
M2 Series AC Servo SHANGHAI AMP&MOONS AUTOMATION CO.,LTD. Content 1 Introduction...8 1.1 About This Manual...8 1.2 Documentation Set for M2 series AC servo...8 1.3 Safety...8 1.4 Safety Symbols...8 1.5
More informationTSM. Step-Servo. Integrated
TSM Integrated New 3 rd Generation Muti-axis field bus control Intelligent built-in controller Compact all-in-one solution Efficient smooth accurate fast Enhanced motor optimized design Closed Loop Compliant
More informationSV200 AC Servo. User Manual
SV200 AC Servo User Manual Table of Contents 1 Introduction... 8 1.1 About This Manual... 8 1.1.1 Documentation Set for SV200 series AC servo... 8 1.1.2 Safety... 8 1.1.2.1 Safety Symbols... 8 1.1.2.2
More informationSV200 AC Servo. User Manual
SV200 AC Servo User Manual Table of Contents 1 Introduction... 9 1.1 About This Manual... 9 1.1.1 Documentation Set for SV200 series AC servo... 9 1.1.2 Safety... 9 1.1.2.1 Safety Symbols... 9 1.1.2.2
More informationBLuAC5 Brushless Universal Servo Amplifier
BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives
More informationBLuAC5 Brushless Universal Servo Amplifier
BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives
More informationSV200 DC Servo System
SV200 DC Servo System Hardware Manual Applied Motion Products, Inc. Table of Contents 1 Introduction... 7 1.1 About This Manual...7 1.2 Documentation Set for the SV200 DC Series Servo Drive...7 1.3 Safety...7
More informationCommitted to Premium Quality. AC Servo System Catalog
Committed to Premium Quality AC Servo System Catalog Company Profile CONTENTS DB100 Series AC Servo System 03 Application fields 04 Servo Driver Product Description 05 Servo Motor Product Description 07
More informationies-2309 Integrated Easy Servo
Datasheet of the integrated easy servo motor ies-09 ies-09 Integrated Easy Servo Motor + Drive + Encoder, 0-0VDC, NEMA, 0.9Nm Features Easy servo control technology to combine advantages of open-loop stepper
More informationDRIVE MOTOR CONTROL SHANGHAI AMP&MOONS' AUTOMATION CO.,LTD.
DRIVE MOTOR CONTROL SHANGHAI AMP&MOONS' AUTOMATION CO.,LTD. The MDX series, integrated servo motors are used to create decentralized motion control solutions in very compact units. They consist of a servo
More information3Specifications CHAPTER THREE IN THIS CHAPTER
CHAPTER THREE 3Specifications IN THIS CHAPTER Drive Specifications SM and NeoMetric Motor Specifications SM and NeoMetric Motor / Curves SM and NeoMetric Motor Dimensions SM and NeoMetric Encoder Specifications
More informationMTS Automation P R O D U C T S P E C I F I C A T I O N. MaxPlus Digital Servo Drive. MP-FLX 230 Series. MP-FLX 230 Series. Single- and Dual-Axis
P R O D U C T S P E C I F I C A T I O N MaxPlus Digital Servo Drive MP-FL 230 Series MP-FL 230 Series Single- and Dual-Axis At two times the standard industry speed for digital current loop update rates,
More informationLXM32MU60N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw
Product data sheet Characteristics LXM32MU60N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 0.4 kw Main Range of product Lexium 32 Product or component type Device short name
More informationIntegrated Servo Motor UCS57
Integrated Servo Motor Introduction is a new generation of high performance digital integrated servo drive motor, which is a series of low voltage AC servo products integrated with AC servo motor and drive
More information3DM phase Digital Stepper Drive
3DM2283 3-phase Digital Stepper Drive 150-220VAC, 0.5-8.2A peak, Auto-configuration, Low Noise Anti-Resonance provides optimal torque and nulls mid-range instability Motor auto-identification and parameter
More informationLXM32MD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw
Product data sheet Characteristics LXM32MD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 1.8 kw Main Range of product Lexium 32 Product or component type Device short name
More informationLXM32CD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw
Product data sheet Characteristics LXM32CD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 1.8 kw Main Range of product Lexium 32 Product or component type Device short name
More informationDesign Characteristics. FlexDrive II. Series
AC AC DC DC FlexDrive II Series Design Characteristics Brushless AC Servo Baldor s FlexDrive II series are designed to provide reliable and durable operation. Options are available to operate either resolver
More informationIntegrated Easy Servo
ies 1706 Integrated Easy Servo Motor + Drive + Encoder, 18 32VDC, NEMA17, 0.6Nm Features Easy servo control technology to combine advantages of open loop stepper systems and brushless servo systems Closed
More informationNew Servo Concept: Junma
New Servo Concept: Junma Junma uses the world s premier servo technology to provide unmatched performance with a quick and efficient setup. This totally new plug and play design concept requires no parameter
More informationSpecifications of ASDA A2-E_220V Series
Specifications of ASDA A2-E_220V Series Power Supply 100W 200W 400W 750W 1kW 1.5kW 2kW 3kW ASDA A2-E Series 01 02 04 07 10 15 20 30 Phase / Voltage Three-phase / Single-phase 220VAC Three-phase 220VAC
More informationEmployee satisfaction
Dawn of MOONS' 3A Era st A Motion Products & Motion Control Products for Manufacturing Automation MOONS' is a leading manufacturer of the key parts, components and system level products used in manufacturing
More informationInverter Drive /Vector Drive Motors & Controls
H2 Inverter/ Encoderless Vector Inverter Drive /Vector Drive & Controls 3/4 thru 50 180-264 VAC 3 Phase - 50/60 Hz 3/4 thru 60 340-528 VAC 3 Phase - 50/60 Hz 3/4 thru 60 515-660 VAC 3 Phase - 60 Hz HVAC
More informationTETRA COMPACT - E AND FLEXI - PRO THE ENHANCED SERVO BUNDLE
TETRA COMPACT - E AND FLEXI - PRO THE ENHANCED SERVO BUNDLE Mo t or P ow e r Com pa n y www.m ot orpow e rc o. c om info@m ot orpow e rc o. i t All r ight s re se rve d. Comple t e or pa rt i a l re produ
More informationTETRA COMPACT - E AND FLEXI - PRO
TETRA COMPACT - E AND FLEXI - PRO THE ENHANCED SERVO BUNDLE Motor Power Company introduces its new brushless servo bundle: TETRA COMPACT- ENHANCED, brushless servomotors, perfectly matched with the FLEXI-PRO
More informationPKS-PRO-AEA-EC-30-GP22
PKS-PRO-AEA-EC-30 - EtherCAT Servo System FEATURES Updates 1000 Inputs/Outputs of Information of 2,025 oz-in Power Ratings up to 3000 Watts Open Network Based on Ethernet 2,500 PPR Incremental Encoder
More informationSVAC3. 400W AC Powered Servo Drive. Accessories C IP IP IP C IP. Control Options* For more information, visit:
Feedback E = Encoder board 3 = 3.5A cont, 7.4A peak, 120VA 1.8A cont, 5.4A peak, 220VA ontrol S = Basic version Q = Q Programming = EtherNet/ BLuA5-Si SVA3-S-E120 SVA3-S-E220 SVA3-Q-E120 SVA3-Q-E220 SVA3--E120
More informationTwo-phase Digital Stepper Motor Driver SD Low Vibration Low Noise Low Power. Characteristics. Performance Index. Product Codes:
Two-phase Digital Stepper Motor Driver SD-20403 Product Codes: 001700 Low Vibration Low Noise Low Power Characteristics 32-bit DSP digital control mode Low vibration. low noise. low power Flexible micro-stepping,
More informationM2 Series AC Servo System
M2 Series AC Servo System Quick Setup Guide Manual SHANGHAI AMP & MOONS AUTOMATION CO.,LTD. Safety Only quali ed persons may perform the installation procedures. The following explanations are for things
More informationPKS-PRO-AEA-EC-20-GP22
PKS-PRO-AEA-EC-20 - EtherCAT Servo System FEATURES Updates 1000 Inputs/Outputs of Information of 1352 oz-in Power Ratings up to 2000 Watts Open Network Based on Ethernet 2,500 PPR Incremental Encoder Maximum
More informationILA2E572PC1A0 integrated drive ILA with servo motor V - EtherCAT - indus connector
Characteristics integrated drive ILA with servo motor - 24..48 V - EtherCAT - indus connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network
More informationATV12H018F1 variable speed drive ATV kW hp V - 1ph
Characteristics variable speed drive ATV12-0.18kW - 0.25hp - 100..120V - 1ph Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly style Component
More informationATV12H037F1 variable speed drive ATV kW hp V - 1ph - with heat sink
Characteristics variable speed drive ATV12-0.37kW - 0.55hp - 100..120V - 1ph - with heat sink Main Range of product Altivar 12 Product or component type Product destination Product specific application
More informationSingle-phase or three phase AC220V (-15% ~ +10%) 50 ~ 60Hz
KT270-H Servo Drive Features: The use of DSP ( digital signal processor ) chip, greatly accelerating the speed of data acquisition and processing, the motor running with good performance. Application of
More informationEasy Installation Small Size Excellent Performance
Easy Installation Small Size Excellent Performance Catalogue 01 MLA20 Series 03 MLA28 Series 05 MLA35 Series 07 MLA42 Series 09 Encoder Options 11 Brake Options 12 Stepper Drives 13 SR Series 13 ST Series
More informationPKS-PRO-AEA-EC-08-JP22
PKS-PRO-AEA-EC-08 - Servo System FEATURES Updates 1000 Inputs/Outputs of Information of 338 oz-in Power Ratings up to 750 Watts Open Network Based on Ethernet 17-bit Absolute Encoder Maximum Speed of 4,500
More informationSoloist. Position Controller and Servo Amplifier PWM. Single axis digital servo controller with integral power supply and amplifier
Soloist Position Controller and Servo Amplifier PWM Single axis digital servo controller with integral power supply and amplifier Advanced software architecture shortens customer development time; use
More informationPKS-PRO-AEA-EC-02-JP22
PKS-PRO-AEA-EC-02 - Servo System FEATURES Updates 1000 Inputs/Outputs of Information of 90 oz-in Power Ratings up to 200 Watts Open Network Based on Ethernet 17-bit Absolute Encoder Maximum Speed of 4,500
More informationBrushless Servo Motor Drives xdrive Series
Brushless Servo Motor Drives xdrive Series All-Digital, AC-Input, Velocity or Torque Control Allied Motion s xdrive servo drives are precision, all-digital DSP-based servo drive amplifiers capable of supplying
More informationAnalog Servo Drive. Peak Current 16 A (11.3 A RMS )
Description The PWM servo drive is designed to drive three phase brushless motors with sine wave current at a high switching frequency. The drive requires two sinusoidal command signals with a 120-degree
More informationAnalog Servo Drive 30A20AC
Description Power Range NOTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
More informationHigh-Performance Servo Drive Family. - E xperi ence - Va l u e. Valu
High Servo Drive Family E xperi ence Va l u e Perform Experience Valu High Servo Drive Family Servotronix introduces CDHD, the nextgeneration high performance servo drive. CDHD features hardware and software
More informationTSM. Step-Servo. Integrated
TSM Integrated sed o l C p Loo Multi-axis field bus control Intelligent built-in controller Compact all-in-one solution Efficient, smooth, accurate & fast Enhanced motor optimized design Compliant Features
More informationNpaq Series Drive Racks
Npaq Series Drive Racks 3U plug-in drives 19 inch rack-mount design Flexible design provides the ability to drive brush, brushless, or stepper motors with the same amplifier 5 A to 30 A peak output current
More informationPeak Current. Continuous Current. See Part Numbering Information on last page of datasheet for additional ordering options.
Description Power Range The PWM servo drive is designed to drive brushless DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected against
More informationThe Gold Duo Highly Compact Dual Axis Networking Servo Drive Up to 1.6 kw (3.2 kw Peak) of Qualitative Power Per Drive
Elmo's Line Our Best Ever Motion Solutions The Duo Highly Compact Dual Axis Networking Servo Drive Up to 1.6 kw (3.2 kw Peak) of Qualitative Power Per Drive Motion Control Solutions Made Small, Smart &
More informationFUJI SERVO SYSTEM. MEH555c
FUJI SERVO SYSTEM MEH555c Servo Amplifier Line of products of ALPHA5 Series Model VV type Pulse/ analog Command interface Di/Do Modbus -RTU SX bus Control mode Positioning Position Speed Torque Power supply
More informationATV12H037F1 variable speed drive ATV kW hp V - 1ph - with heat sink
Characteristics variable speed drive ATV12-0.37kW - 0.55hp - 100..120V - 1ph - with heat sink Product availability : Stock - Normally stocked in distribution facility Price* : 191.76 USD Main Range of
More informationHBS Series Hybrid Servos
Hybrid Servos 46 Hybrid Servos From the stepper and servo, but surpass them in many applications! HBS Series Hybrid Servos Closed-loop, eliminates loss of synchronization The HBS series use an encoder
More informationLexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILA with AC synchronous servo motor Description ILA comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and an AC synchronous
More informationSYSTEM OVERVIEW. Kollmorgen GOLDLINE BH & SERVOSTAR 600 Systems
SYSTEM OVERVIEW Kollmorgen GOLDLINE BH SEE PAGE 32 Kollmorgen GOLDLINE BH servomotors build on the tradition of high performance servomotors from Kollmorgen. Designed around the classic industry-standard
More informationServo Drives SPECIFICATIONS Model DA-XDA DA-XDA DA-XDA Continuous Current 4 A peak / 2.8 A RMS 8 A peak / 5.6 A RMS 16 A peak
Allied Motion s new xdrive servo drives are precision, all-digital DSPbased servo drive amplifiers capable of supplying up to 16 A peak continuous, 32 A peak current at up to 230 VAC. The xdrive is designed
More informationGold Our Best Ever Motion Solutions
Elmo's Line Our Best Ever Motion Solutions The Trombone An Ultra-Compact 400 VDC & 800 VDC "Direct to Mains" Networking Servo Drive Up to 7 kw of Qualitative Power Motion Control Solutions Made Small,
More informationNdrive Series. Digital Servo Amplifiers PWM. Wide output power range from 10 A peak to 200 A peak at 320 VDC. 2- or 3-phase AC line input or DC input
Ndrive PWM Amplifiers/Drives Ndrive Series Digital Servo Amplifiers PWM Wide output power range from 10 A peak to 200 A peak at 320 VDC 2- or 3-phase AC line input or DC input CE approved and NRTL safety
More informationGeneral-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)
General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) D Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment
More informationIC800SSD Hardware Manual Pub 348R5. for models. A publication of
IC800SSD Hardware Manual Pub 348R5 for models IC800SSD104S1A IC800SSD104RS1A IC800SSD107S1A IC800SSD107RS1A IC800SSD407RS1A IC800SSD216S1A IC800SSD216RS1A IC800SSD420RS1A IC800SSD228S1A IC800SSD228RS1A
More informationSEE IT BEFORE IT HAPPENS TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS
SEE IT BEFORE IT HAPPENS TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS SEE IT BEFORE IT HAPPENS Mo t or P ow e r Com pa n y www.m ot orpow e rc o. c om info@m ot orpow e rc o. i t All r ight s re se
More informationGeneral-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)
General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) F Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment
More information6th digit. 5th digit. 4th digit. Code Specifications 3 20-bit absolute (standard) D 20-bit incremental (standard) Design Revision Order
Rotary s Model Designations - 3 D Series st+nd digits 3rd digit th digit th digit th digit 7th digit st+nd digits Rated Output th digit Serial Encoder 7th digit Options Code 3 3 W W 9 8 W 3.3 kw.8 kw 3.9
More informationATV12HU40M3 variable speed drive ATV12-4kW - 5hp V - 3ph - with heat sink
Characteristics variable speed drive ATV12-4kW - 5hp - 200..240V - 3ph - with heat sink Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly
More informationAnalog Servo Drive. Continuous Current. Features
Description Power Range The PWM servo drive is designed to drive three phase brushless motors with sine wave current at a high switching frequency. The drive requires two sinusoidal command signals with
More informationEnsemble HPe/CP/MP. Networked, Panel-Mount Drives PWM. Network drives through a high-speed serial interface to coordinate up to ten axes of motion
Ensemble PWM Motion Controllers Ensemble HPe/CP/MP Networked, Panel-Mount Drives PWM Network drives through a high-speed serial interface to coordinate up to ten axes of motion Coordinate motion using
More informationVariable Frequency Drive / Inverter (0.4 ~ 280kW)
Variable Frequency Drive / Inverter (0.4 ~ 280kW) & Standard Features Configuration Comparison Comparison Table Enclosure IP00 IP20 NEMA 1 Rating Single phase 0.4 2.2kW 0.4 1.5kW Three phase 0.4 4kW Constant
More informationPKG-341-MLA-CBL System Diagram and Specifications
PKG-341-MLA-CBL System Diagram and Specifications 600 34Y112S-LW8, MLA10641, Div by 16, 120VAC, Series 400 Included Components: 540 360 34Y112S-LW8-MS MLA10641 CBL-18AWG-04C-010-MS PWR-10EMC1 LIN-AA4254
More informationMICROFUSION FEATURES OPTIONS CERTIFICATIONS THREE PHASE SCR POWER CONTROLLERS
MICROFUSION THREE PHASE SCR POWER CONTROLLERS FEATURES Auto-Ranging Input Voltage 24-600 VAC, 45-65 Hz AC Output 8, 16, 32, 50, 80 Amps (@ 50 C 6000 ft) Control Features Microprocessor-based controller
More informationAZ Series. Function Edition. Closed Loop Stepping Motor and Driver Package. Operation. I/O signals. Parameter
HM-6262 Closed Loop Stepping Motor and Driver Package Operation I/O signals Parameter AZ Series Function Edition Method of control via Modbus RTU (RS-485 communication) Method of control via industrial
More informationStepping Motor Station
Stepping Motor Station PV-7300 System A single system can measure all seven of the characteristics important in a stepping motor, namely the -T characteristic, holding torque, detent torque, pull-in torque,
More informationIntegrated servo motor
R88E-AECT@, R88S-EAD@ Integrated servo motor Motor and drive integrated for space optimization Wide range of motors from 2.55 Nm to 25 Nm 3000 rpm rated speed Peak torque 300% of rated torque IP65 protection
More informationSEE IT BEFORE IT HAPPENS TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS
SEE IT BEFORE IT HAPPENS TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS SEE IT BEFORE IT HAPPENS Mo t or P ow e r Com pa n y www.m ot orpow e rc o. c om info@m ot orpow e rc o. i t All r ight s re se
More informationTDE MACNO Spa. AC&DC Drives, Servos and Drive System. AFE converters for Renewable Energies Regenerative (active) power supply (Active Front End)
TDE MACNO Spa AC&DC Drives, Servos and Drive System AFE converters for Renewable Energies Regenerative (active) power supply (Active Front End) Automation and Control Systems OPENDRIVE EXP MINI OPENDRIVE
More informationUniversal Radius Mounting Option. Fixed Radius Mounting Option
F e a t u r e s Factory Set for Same Day Dispatch (1 to 65,536 Pulses Per Rev) 100 Degrees Centegrate cabability as standard Opto-ASIC Technology Any bore - up to 15mm bore (Metric) or (Imperial) The 60HA
More informationDS2 series servo drive
DS2 series servo drive Manual WUXI XINJE ELECTRIC CO., LTD. Data No.: SC209 20110412 1.0 2 Safety notes Confirmation Do not use the drivers that are broken, lack of parts or wrong types. Installation Make
More informationDriver Specification for Linear Motor Drive Tables
Driver Specification for Linear Motor Drive Tables 355 35 2 1 3 4 NCR Specification of NCR for NT38V Low-voltage (DC24V) and compact design of 115 x 100 x 33.8 mm. It contributes to miniaturization of
More informationSilverMax Datasheet. QuickSilver Controls, Inc. NEMA 23 Servomotors.
SilverMax Datasheet NEMA 23 Servomotors QuickSilver Controls, Inc. www.quicksilvercontrols.com SilverMax Datasheet - NEMA 23 Servomotors 23 Frame Sizes: 23-3, 23-5, 23H-1, 23H-3, 23H-5 / Series: E, E3,
More informationTETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS
TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS BRUSHLESS TECHNOLOGY FEATURES AND BENEFITS Synchronous brushless servomotor, permanently excited Rated output power from 60W to 800W Maximum servomotor speed
More informationFD423-EA-000 EtherCAT Servo Drive
FEATURES Power Rating of 400-750 Watts 220 VAC Open Network Based on Ethernet RS232 and EtherCAT Supports Modbus 485 and RS232 Communication Protocol Rated Current 4A, Peak Current 15A Supports Pulse +
More informationES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,
More informationINS500 Series Driver ( **CE Approved ) 5 Phase NanoDrive DC Type Driver Units
INS Series Driver ( **CE Approved ) Phase NanoDrive DC Type Driver Units A compact package matching most existing motors Vdc Supply Input High Resolution possible ( selectable up to, steps per revolution
More informationNdrive Series. Digital Servo Amplifiers PWM. Wide output power range from 10 A peak to 200 A peak at 320 VDC. 2- or 3-phase AC line input or DC input
Ndrive PWM Amplifiers/Drives Ndrive Series Digital Servo Amplifiers PWM Wide output power range from 10 A peak to 200 A peak at 320 VDC 2- or 3-phase AC line input or DC input CE approved and NRTL safety
More informationG5 Series Servo System
G5 Series Servo System Extreme mechatronics meets -Stream Automation»» Sub micron precision and ms settling time»» Motion network and safety built-in»» Double registration and full closed loop G5 Series
More information43000 Series: Size 17 Linear Actuator. Haydon Series Size 17 hybrid linear actuators are our best selling compact hybrid motors.
Size 17 Captive Shaft 43000 Series: Size 17 Linear Actuator Haydon 43000 Series Size 17 hybrid linear actuators are our best selling compact hybrid motors. The various patented designs deliver high performance,
More informationMotor Drives & Controllers
Motor Drives & Controllers For the past 20 years, FORMOSA MOTORS is well known for pursuing high technology motors in Taiwan. To make customer s requirements satisfatisory & perfect We supply customers
More informationES86 Series Closed-loop Stepper Drive + Motor System (ES-D808 Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (ES-D808 Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because
More informationAnalog Servo Drive 30A8
Description Power Range The 30A8 PWM servo drive is designed to drive brush type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected
More informationMDrive Plus Stepper motors with integrated electronics. MDrive 17 Plus Speed Control with programmable velocity control
Stepper motors with integrated electronics MDrive 17 Plus Description Presentation The is a 1.8 2-phase stepper motor with on-board control electronics. The velocity control uses voltage, current, or PWM
More informationSoftware Operational Manual
Software Operational Manual for Easy Servo Drives ES-D508/808/1008 www.leadshine.com SM-ES-R20121030 ii Leadshine reserves the right to make changes without further notice to any products herein to improve
More informationAC Linear Motor Servo Driver
AC Linear Motor Servo Driver cpc reserves the right to revise any information(technical details) any time without notice, for printing mistakes or any other incidental mistakes. We take no responsibility.
More informationAnalog Servo Drive 20A20
Description Power Range NOTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
More informationLSM&DSD Brushless Servo Drive Package
LSM&DSD Brushless Servo Drive Package Descriptions LSM&DSD brushless servo drive package consists of one of LSM60 brushless servo motors and DSD806 brushless servo drive, offering high performance with
More informationDatasheet of the Easy Servo Drive ES-D VDC, 8.0A Peak, Closed-loop, No Tuning
Datasheet of the Easy Servo Drive ES-D508 0-45VDC, 8.0A Peak, Closed-loop, No Tuning Version 1. http://www.leadshine.com Features Step and direction control Closed position loop for no loss of movement
More informationServo Motor Driver. 4. Specifications: Digital Driver Model ACS806. Digital Technology, max. 80 V DC / 6.0 A, W. 1. Product Description:
Digital Driver Model ACS806 Digital Technology, max. 80 V DC / 6.0 A, 50 400 W 1. Product Description: Leadshine's fully digital AC servo drive ACS806 is developed with 32-bit DSP based on advanced control
More informationXC4e PWM Digital Drive
PWM Digital Drive HyperWire fiber-optic interface Up to 30 A peak output current Integral power supply Amplifiers/Drives Drive brush, brushless, voice coil, or stepper motors Safe torque off (STO) safety
More information