RF/Microwave Coaxial Connectors

Transcription

1 If the list of contents does not appear on the left hand side of your monitor please go to: WINDOW SHOW BOOKMARKS RF/Microwave Coaxial Connectors 40A SPRINGWOOD DRIV, BRAINTR, SSX CM7 2YN, NGLAND TL: +44(0) FAX: +44(0) mail: Website: wwwatlanticmicrowavecouk

2 The range of Coaxial Connectors has been designed for volume, cost effective applications in RF and microwave communications where quality and reliability are of prime consideration ach of the many series meet the stringent internationally recognised interface, mechanical and electrical specifications and production utilises the latest automatic and CNC machining and fabrication technologies Manufacture takes place within ISO9002 approved facilities and rigorous incoming, inprocess and outgoing inspection is employed to ensure conformity and repeatability of product Research and development in the areas of new products, materials and processes is ongoing and we are always pleased to consider custom requirements and to ensure that the connectors are optimised for the applications We welcome your telephone, fax or enquiries for either standard or custom products and our experienced engineering, sales and customer service teams are ready to support your needs mail:

3 Important information Use contents table and the colour tabs on the outside edge of the right hand pages to locate the section you want About the assembly instructions The contents table on page 3 details all necessary information regarding this catalogue Please check with the contents table along with the colour tab of each section on the outside edge of the right hand pages, you will easily find the section you need For those connectors requiring cable attachment, the proper assembly instruction reference is marked as A on each connector's drawing section Detailed assembly instructions for coaxial connectors can be found on page About the mounting hole dimensions For those connectors requiring mounting holes in panel, bulkhead or printed circuit board, reference to mounting hole dimensions is indicated under the remark section of each connector PCB mounting hole plans are located on page giving detailed dimensions of all mounting holes Sales information connectors may be ordered exclusively from: Atlantic Microwave Ltd 40A Springwood Drive Braintree ssex CM7 2YN ngland Tel: 44(0) Fax: 44(0) mail sales@atlanticmicrowavecouk Or from any of our aythorised international sales representatives or distributors Please contact us for details Terms All orders for connectors or other products are subject to acceptance at the sole discretion of Atlantic Microwave Ltd and then only on the standard terms and conditions of sale of Atlantic Microwave Ltd, available on request Payment terms are subject to account approval and will be advised at the time of order placement Please ask about our payment plans for nonapproved accounts Property in the goods will only pass to the purchaser upon payment in full Risk in the goods passes to the purchaser upon despatch Scheduled delivery over a period of up to 12 months can be arranged and buffer stock can be held by special agreement mail: sales@atlanticmicrowavecouk

4 Important Information Specifications Warranty We reserve the right to change standard product specifications without notice but will be pleased to consider control drawings for quotation products are warrented to be free of defects in material and workmanship under normal conditions within a year of shipment We will repair or replace any defective parts under warranty period at our discretion This warranty does not apply to parts which have been abused, modified, disassembled, or subjected to conditions exceeding our specifications Returns No returns will be accepted without written authorization from Atlantic Microwave Ltd Return Material Authority (RMA) Customers are asked to provide the reason for the intended return, invoice number, P/O and part number, date code/shipment date and instruction for the replacement shipment once the return has been processed by us Ownership of the product remains the purchaser's until received by Alantic Microwave Ltd Freight is the responsibility of the purchaser Guide to part number system Please use part number system when placing your orders XAMPL SMA1234 N T 50G 316/U 50 Model no Metal Parts Finish Insulator Center Contact Finish Cable Group Impedance ie N=Nickel S=Silver (special req) S/P=Stainless Steel, Passivated B/N=Brass, Nickel B/3G=Brass, 3µ"Au B/10G=Brass, 10µ"Au B/15G=Brass, 15µ"Au B/30G=Brass, 30µ"Au ie D=Delrin T=Teflon PH=Phenolic PB=PBT Polyester ie 3G=3µ"Au 10G=10µ"Au 30G=30µ"Au 50G=50µ"Au S=100µ"Ag ie ie 8U=RG 8/U 50=50 ohm 58C/U=RG58C/U 75=75 ohm 59/U=RG59/U 174/U=RG174/U 213U=RG213/U 316/U=RG316/U 141=141 SMIRIGID 085=085 SMIRIGID mail: sales@atlanticmicrowavecouk

5 Microwave Components In addition to the coaxial connectors and accessories described within this catalogue, offers a wide range of passive and active RF and microwave components and equipment for the communications, information technology, aerospace and defence industries The products available operate in frequency ranges from dc through to 40GHz and include: Amplifiers Coaxial Attenuators Coaxial Terminations Coaxial Cable Assemblies Coaxial Resonator Oscillators Dielectric Resonator Oscillators Directional Couplers Frequency Converters Hybrid Couplers Mixers Noise Generators PC Programmable Sources Phase Locked Oscillators Power Dividers Voltage Controlled Oscillators Many standard products are available from Stock for same day despatch We are also pleased to consider custom requirements for quotation Please request our Microwave Components & quipment catalogue, or contact us with details of your requirement mail: sales@atlanticmicrowavecouk

6 MMCX Series MMCX MMCX Series is a 6 GHz 50 ohm coaxial interconnect system and aims to meet the expanding needs of surface mount coaxial interconnection system as well as the conventional connector styles for flexible and semirigid cables This series is especially ideal for those applications which use surface mount technique and smaller packaging, for example, PCMCIA cards for wireless LANS (WLANS) and wireless POS (PointofSale), cellular telephones, base stations and Global Positioning Systems (GPS) MMCX Connectors Specification Crimp Attachment for Flexible Cable Direct Solder for SemiRigid Cable Printed Circuit Board Adapter dgecard Mount Solder Pot Terminal mail: sales@atlanticmicrowavecouk

7 MMCX MMCX Series Specification LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 50 ohm 06 GHz 170 VRMS max at sea level 500 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 5 Milliohms Max Outer Contact : 25 Milliohms Max 1000 megohms min MATRIAL Parts Name Body, Metal Parts Center Contacts Insulators Crimp Ferrules Material Brass per QQB626 Male : Brass per QQB626 Female : Beryllium copper per QQC530 PTF Annealed copper Finish Nickel or Gold per requirement Gold Gold None Nickel or Gold per requirement Note : Other Material / Finish is Available on Request MCHANICAL ngagement Force Disengagement Force Contact Retention Durability ( Mating ) 34 lbs max 14 lbs 34 lbs 23 lbs min 500 cycles min NVIRONMNTAL Temperature Range Temperature Shock Humidity Vibration Mechanical Shock 40ºC thru 90ºC MilSTD202, Method 107 MilSTD202, Method 103, Condition B 3 cycles, 3 opposite directions, Hz, 1060 Hz: 075mm/030 in, 60150Hz 10G's MilSTD202, Method 213, Condition B mail: sales@atlanticmicrowavecouk

8 MMCX Series Specification MMCX INTRFAC MATING DIMNSIONS Letter A B C D F G H PLUG Millimeters Minimum Maximum Letter A B C D F G H I J JACK Millimeters Minimum Maximum NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 038/042 MM DIA PIN mail: sales@atlanticmicrowavecouk

9 MMCX MMCX Series Crimp Attachment for Flexible Cable STRAIGHT PLUG MMCX1001 RG174/U, 188/U, 316/U, 196A/U STRAIGHT JACK MMCX1002 RG174/U, 188/U, 316/U, 196A/U RIGHT ANGL PLUG MMCX1003 RG174/U, 188/U, 316/U, 196A/U mail:

10 MMCX Series Direct Solder for SemiRigid 085" MMCX STRAIGHT PLUG S MMCX " Cable A=22 min, B=30 min STRAIGHT JACK S MMCX " Cable A=22 min, B=30 min RIGHT ANGL PLUG T MMCX " Cable A=22 min, B=30 min mail: sales@atlanticmicrowavecouk

11 MMCX MMCX Series Printed Circuit Board Straight R/A Terminal STRAIGHT PLUG FOR PRINTD CIRCUITS MMCX1007 Mounting hole Dia see Type "N" on page 199 STRAIGHT JACK FOR PRINTD CIRCUITS MMCX1008 Mounting hole Dia see Type "N" on page 199 RIGHT ANGL JACK FOR PRINTD CIRCUITS MMCX1009 Mounting hole Dia see Type "N" on page 199 mail:

12 MMCX Series Adapter MMCX JACK TO JACK ADAPTR MMCX1010 dgecard Mount Solder Pot Terminal STRAIGHT DGCARD PLUG MMCX1011 STRAIGHT DGCARD JACK MMCX1012 mail:

13 MCX Series MCX MCX Series connectors are ideal for applications and designs where weight and space savings are critical This series has a 50 ohm impedance structure operates in a frequency range up to 6 GHz Its pushon/pulloff mating design allows a quick connect/disconnect facility 's MCX connectors are popularly used in cellular telephony, information system and communication markets MCX Connectors Specification Crimp Attachment for Flexible Cable Direct Solder for SemiRigid Cable Printed Circuit Board mail: sales@atlanticmicrowavecouk

14 MCX Series Specification MCX LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 50 ohm 06 GHz 335 VRMS max at sea level 1000 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 5 Milliohms Max Outer Contact : 25 Milliohms Max 1000 megohms min MATRIAL Parts Name Body, Metal Parts Outer Contact of male Center Contacts Insulators Crimp Ferrules Material Brass per QQB626 Beryllium copper per QQC530 Male : Brass per QQB626 Female : Beryllium copper per QQC530 PTF Annealed copper Finish Nickel or Gold per requirement Gold plated Gold plated Gold plated None Nickel or Gold per requirement Note : Other Material / Finish is Available on Request MCHANICAL ngagement Force Disengagement Force Contact Retention Durability ( Mating ) 34 lbs max 45 lbs max 4 lbs min 500 cycles min ( for Beryllium copper female contact only ) mail: sales@atlanticmicrowavecouk

15 MCX Series Specification INTRFAC MATING DIMNSIONS MCX Letter A B C D F G PLUG Millimeters Minimum Maximum Letter A B C D F G JACK Millimeters Minimum Maximum NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 048/053 MM DIA PIN mail: sales@atlanticmicrowavecouk

16 MCX Series Crimp Attachment for Flexible Cable STRAIGHT PLUG MCX MCX1001 RG174/U, 188/U, 196A/U, 316/U STRAIGHT JACK MCX1002 RG174/U, 188/U, 196A/U, 316/U RIGHT ANGL PLUG MCX1003 RG58/U, 174/U, 188/U, 196A/U, 316/U mail:

17 MCX Series Direct Solder for SemiRigid 085" or 141" Cable STRAIGHT CABL PLUG S MCX " Cable A=22 min, B=30 min MCX STRAIGHT CABL JACK S MCX " Cable A=22 min, B=30 min RIGHT ANGL CABL PLUG T MCX " Cable A=22 min, B=30 min 141" Cable A=36 min, B=46 min mail: sales@atlanticmicrowavecouk

18 MCX Series Printed Circuit Board Straight Terminal MCX STRAIGHT JACK FOR PC BOARD MCX1007 Mounting hole Dia see Type "B" on page 198 STRAIGHT JACK SURFAC MOUNT MCX1008 Mounting hole Dia see Type "B" on page 198 RIGHT ANGL JACK MCX1009 Mounting hole Dia see Type "B" on page 198 mail:

19 7/16 Series 7 / 16 7/16 series connectors are featured with superior performance for return loss and intermodulation distortion These connectors are ideal for those applications where vibration resistance and environmental protection is important, such as radio base station and broadcast communication applications 7/16 Connectors Specification Crimp Attachment for Flexible Cable Clamp for Foam Dielectric Corrugated Copper Tube Cables Panel Mount Solder Pot Terminal Adapter mail: sales@atlanticmicrowavecouk

20 7/16 Series Specification 7 / 16 LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 50 ohm 075 GHz 2700 VRMS max at sea level 4000 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 04 Milliohms Max Outer Contact : 02 Milliohms Max 5000 megohms min MATRIAL Parts Name Body, Metal Parts Center Contacts Insulators Gasket Crimp Ferrules Material Brass per QQB626 Male : Brass per QQB626 Female : Beryllium copper per QQC530 PTF Silicone rubber Annealed copper Finish Silver Silver Silver None None Silver Note : Other Material / Finish is Available on Request MCHANICAL Coupling Nut Retention Coupling Proof Torque Contact Retention Durability ( Mating ) 225 lbs max 310 in lbs max 45 lbs min 500 cycles min (for Beryllium copper female contact only ) mail: sales@atlanticmicrowavecouk

21 7/16 Series Specification INTRFAC MATING DIMNSIONS 7 / 16 Letter A B C D F G H I J PLUG Millimeters Minimum Maximum Letter A B C D F G H I JACK Millimeters Minimum Maximum NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 496/504 MM DIA PIN mail: sales@atlanticmicrowavecouk

22 7/16 Series Crimp Attachment for Flexible Cable STRAIGHT PLUG RG214/U 7 / 16 STRAIGHT JACK RG214/U STRAIGHT PANL JACK RG214/U mail: sales@atlanticmicrowavecouk

23 7/16 Series Clamp for Foam Dielectric Corrugated Copper Tube Cables STRAIGHT PLUG SOLDRLSS CNTR CONTACT R /2" helical 7 / 16 RIGHT ANGL PLUG SOLDRLSS CNTR CONTACT R /8" helical STRAIGHT JACK SOLDRLSS CNTR CONTACT R /2" helical STRAIGHT PANL JACK SOLDRLSS CNTR CONTACT R /8" helical mail: sales@atlanticmicrowavecouk

24 7/16 Series Panel Mount Solder Pot Terminal STRAIGHT PANL RCPTACL JACK / 16 Adapter PLUG TO PLUG ADAPTR JACK TO JACK ADAPTR mail: sales@atlanticmicrowavecouk

25 10/23 Series 10 / 23 10/23 series connectors feature the slide on/screw on coupling latch to prevent accidental disconnection These connectors, owning to their smaller size, are popularly used in telecommunication systems where space saving is critical 10/23 Connectors Specification Crimp Attachment for Flexible Cable Printed Circuit Board mail: sales@atlanticmicrowavecouk

26 10/23 Series Specification LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 50 ohm 04 GHz 250 VRMS max at sea level 750 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 6 Milliohms Max Outer Contact : 3 Milliohms Max 1000 megohms min 10 / 23 MATRIAL Parts Name Male (Plug) Material Body/Metal Parts : Brass per QQB626 Finish Nickel Outer Contacts : Phosphor Bronze per QQB750 Gold Center Contacts : Brass per QQB626 Gold Female (Jack) Body/Metal Parts : Brass per QQB626 Gold/Nickel Center Contacts : Beryllium Copper per QQC530 Gold Insulators Crimp Ferrules PTF Annealed copper None Nickel or Gold per requirement Note : Other Material / Finish is Available on Request MCHANICAL ngagement Force Disengagement Force Contact Retention Durability ( Mating ) 23 lbs max 23 lbs max 4 lbs min 500 cycles min (for Beryllium copper female contact only ) mail: sales@atlanticmicrowavecouk

27 10/23 Series Specification INTRFAC MATING DIMNSIONS 10 / 23 Letter A B C D PLUG Millimeters Minimum Maximum Letter A B C D F G JACK Millimeters Minimum Maximum NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 048/052 MM DIA PIN mail: sales@atlanticmicrowavecouk

28 10/23 Series Crimp Attachment for Flexible Cable STRAIGHT PLUG RG174/U, 188A/U, 316/U, 196A/U STRAIGHT JACK 10 / RG174/U, 188A/U, 316/U, 196A/U STRAIGHT BULKHAD JACK RG174/U, 188A/U, 316/U, 196A/U mail: sales@atlanticmicrowavecouk

29 10/23 Series Printed Circuit Board R/A Terminal STRAIGHT JACK FOR PRINTD CIRCUITS Mounting hole Dia see Type "L" on page 198 RIGHT ANGL JACK FOR PRINTD CIRCUITS Mounting hole Dia see Type "L" on page / 23 mail: sales@atlanticmicrowavecouk

30 16/56 Series 16/56 series connectors feature a snapon mating face, which allows easy connection and disconnection This 75 ohm miniature connector series is ideal for use in the telecommunication industry 16/56 Connectors Specification Crimp Attachment for Flexible Cable Clamp Attachment Straight R/A Flexible Cable Printed Circuit Board Adapter 16 / 56 mail: sales@atlanticmicrowavecouk

31 16/56 Series Specification LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 75 ohm 01 GHz 335 VRMS max at sea level 1000 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 4 Milliohms Max Outer Contact : 2 Milliohms Max 1000 megohms min MATRIAL Parts Name Male (Plug) Material Body/Metal Parts : Brass per QQB626 Finish Nickel 16 / 56 Outer Contacts : Phosphor Bronze per QQB750 Center Contacts : Brass per QQB626 Gold Gold Female (Jack) Body/Metal Parts : Brass per QQB626 Gold/Nickel Center Contacts : Phosphor Bronze per QQB750 Gold Insulators Crimp Ferrules PTF Annealed copper None Nickel or Gold per requirement Note : Other Material / Finish is Available on Request MCHANICAL Mating Contact Retention Durability ( Mating ) M9 x 05 threaded coupling 6 lbs min 500 cycles min (for Beryllium copper female contact only ) mail: sales@atlanticmicrowavecouk

32 16/56 Series Specification INTRFAC MATING DIMNSIONS 16 / 56 Letter A B C D PLUG Millimeters Maximum Minimum Letter A B C D F G JACK Millimeters Minimum Maximum NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 10/106 MM DIA PIN mail: sales@atlanticmicrowavecouk

33 16/56 Series Crimp Attachment for Flexible Cable STRAIGHT PLUG RG59/U, 179/U STRAIGHT BULKHAD JACK RG59/U, 179/U 16 / 56 RIGHT ANGL PLUG RG59/U, 179/U RIGHT ANGL BULKHAD JACK RG59/U, 179/U mail: sales@atlanticmicrowavecouk

34 16/56 Series Clamp Attachment Straight R/A Flexible Cable STRAIGHT PLUG Q RG59/U, 179/U STRAIGHT BULKHAD JACK Q RG59/U, 179/U 16 / 56 RIGHT ANGL PLUG Q RG59/U, 179/U RIGHT ANGL BULKHAD JACK RG59/U, 179/U Q mail: sales@atlanticmicrowavecouk

35 16/56 Series Printed Circuit Board Straight R/A Terminal STRAIGHT BULKHAD JACK FOR PRINTD CIRCUITS Mounting hole Dia see Type "M" on page 199 RIGHT ANGL BULKHAD JACK FOR PRINTD CIRCUITS Mounting hole Dia see Type "M" on page / 56 mail: sales@atlanticmicrowavecouk

36 16/56 Series Adapter PLUG TO PULG ADAPTR PLUG TO PLUG "U" LINK ADAPTR PLUG TO JACK TO PLUG "Y" LINK ADAPTR 16 / JACK TO JACK BULKHAD ADAPTR mail: sales@atlanticmicrowavecouk

37 16/56 Series Adapter JACK TO JACK TO JACK "Y" LINK ADAPTR / 56 mail: sales@atlanticmicrowavecouk

38 SMA Series SMA series is semiprecision, sub miniature, high frequency coaxial connectors performing DC through 18 GHz with low reflection and constant 50 ohm impedance High mechanical strength, high durability and low VSWR characterize SMA connectors 's innovation combines SMA connectors with stainless steel coupling nut and brass body which effects lower cost than a full stainless steel version, suitable for the applications where stainless steel construction is not required SMA Connectors Specification Crimp Termination for Flexible Cable Direct Solder for SemiRigid Cable Printed Circuit Board Bulkhead Receptacle Solder Pot Terminal Panel Mount Styles Miniature InSeries Adapter SMA mail: sales@atlanticmicrowavecouk

39 SMA Series Specification LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 50 ohm 0124 GHz on Flexible cable, 0 18 GHz on Simirigid cable RG178 : 170 VRMS max at sea level RG316, 085" : 250 VRMS max at sea level RG142, 141" : 335 VRMS max at sea level RG178 : 500 VRMS min at sea level RG316, 085" : 750 VRMS min at sea level RG142, 141" : 1000 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 6 Milliohms Max Outer Contact : 2 Milliohms Max 5000 megohms min SMA MATRIAL Parts Name Body, Metal Parts Center Contacts Insulators Gasket Crimp Ferrules Material Brass per QQB626 or Nonmagnetic stainless steel per QQS764 # 303 Male : Brass per QQB626 Female : Beryllium copper per QQC530 PTF Silicone Rubber Annealed copper Finish Nickel, Gold or passivated per requirement Gold plated Gold plated None None Nickel or Gold per requirement Note : Other Material / Finish is Available on Request MCHANICAL ngagement Force Disengagement Force Coupling Nut Retention Coupling Proof Torque Contact Retention Durability ( Mating ) 2 inlbs max 2 inlbs max 60 lbs min 15 inlbs min 6 lbs min 500 cycles min mail: sales@atlanticmicrowavecouk

40 SMA Series Specification INTRFAC MATING DIMNSIONS Letter A B C D F G H J PLUG Millimeters Minimum Maximum Letter A B C D F G H J K JACK Millimeters Minimum Maximum SMA NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 09/094 MM DIA PIN mail: sales@atlanticmicrowavecouk

41 SMA Series Crimp Termination for Flexible Cable STRAIGHT PLUG CAPTIV CONTACT SMA1001 RG58/U, 141/U, 142/U, 223/U STRAIGHT PLUG CAPTIV CONTACT SMA1002 RG174/U, 188/U, 316/U STRAIGHT JACK SMA SMA1003 RG58/U, 141/U, 142/U, 223/U STRAIGHT JACK SMA1004 RG174/U, 188/U, 316/U mail:

42 SMA Series Crimp Termination for Flexible Cable STRAIGHT BULKHAD JACK SMA1005 RG58/U, 141/U, 142/U, 223/U STRAIGHT BULKHAD JACK SMA1006 RG174/U, 188/U, 316/U RIGHT ANGL PLUG SMA1007 RG58/U, 141/U, 142/U, 223/U SMA RIGHT ANGL PLUG SMA1008 RG174/U, 188/U, 316/U mail:

43 SMA Series Crimp Termination for Flexible Cable PANL MOUNT JACK 4 HOL SQ FLANG SMA1009 RG58/U PANL MOUNT JACK 4 HOL SQ FLANG SMA1010 RG316/U, 174/U, 188/U PANL MOUNT JACK 2 HOL FLANG SMA SMA1011 RG58/U PANL JACK 2 HOL FLANG SMA1012 RG316/U, 174/U, 188/U mail: sales@atlanticmicrowavecouk

44 SMA Series Direct Solder for SemiRigid 085" or 141" Cable STRAIGHT CABL PLUG HIGH VOLTAG A SMA " Cable STRAIGHT CABL PLUG WITH CONTACT B SMA " Cable STRAIGHT CABL PLUG B SMA " Cable SMA STRAIGHT CABL JACK B SMA " Cable mail: sales@atlanticmicrowavecouk

45 SMA Series Direct Solder for SemiRigid 085" or 141" Cable STRAIGHT CABL JACK B SMA " Cable BULKHAD FDTHROUGH CABL JACK B SMA " Cable BULKHAD CABL JACK B SMA SMA " Cable PANL MOUNT CABL JACK 4 HOL SQ FLANG B SMA " Cable mail: sales@atlanticmicrowavecouk

46 SMA Series Direct Solder for SemiRigid 085" or 141" Cable PANL MOUNT JACK 4 HOL SQ FLANG B SMA " Cable PANL MOUNT CABL JACK 2 HOL FLANG B SMA " Cable PANL MOUNT JACK 2 HOL SQ FLANG B SMA " Cable SMA RIGHT ANGL CABL PLUG DC 124 GHZ D SMA " Cable A=22min, B=30min 141" Cable A=36min, B=46min mail: sales@atlanticmicrowavecouk

47 SMA Series Printed Circuit Board Straight Terminal STRAIGHT PLUG FOR PC BOARD SMA1025 Mounting hole Dia See TYP "A" on page 198 STRAIGHT JACK FOR PC BOARD SMA1026 Mounting hole Dia See TYP "A" on page 198 RIGHT ANGL PLUG FOR PC BOARD SMA SMA1027 Mounting hole Dia See TYP "A" on page 198 RIGHT ANGL JACK FOR PC BOARD SMA1028 Mounting hole Dia See TYP "A" on page 198 mail:

48 SMA Series Printed Circuit Board Straight Terminal RIGHT ANGL JACK FOR PC BOARD SMA1029 Mounting hole Dia See TYP "A" on page 198 Diecast Version SMA mail:

49 SMA Series Bulkhead Receptacle Solder Pot Terminal BULKHAD JACK RCPTACL FRONT MOUNT SMA1030 BULKHAD JACK RCPTACL RAR MOUNT SMA1031 Flange OD at 11 HX BULKHAD JACK RCPTACL RAR MOUNT SMA SMA1032 Flange OD at 8 HX mail: sales@atlanticmicrowavecouk

50 SMA Series Panel Mount Solder Pot Terminal PANL MOUNT PLUG RCPTACL 4 HOL SQ FLANG SMA1033 PANL MOUNT PLUG RCPTACL 2 HOL FLANG SMA1034 PANL MOUNT JACK RCPTACL 4 HOL SQ FLANG SMA1035 SMA PANL MOUNT JACK RCPTACL 2 HOL FLANG SMA1036 mail: sales@atlanticmicrowavecouk

51 SMA Series Panel Mount Solder Pot Terminal PANL MOUNT PLUG RCPTACL 4 HOL SQ FLANG XPOSD TF TYP SMA1037 PANL MOUNT PLUG RCPTACL 2 HOL FLANG XPOSD TF TYP SMA1038 PANL MOUNT JACK RCPTACL 4 HOL SQ FLANG XPOSD TF TYP SMA SMA1039 PANL MOUNT JACK RCPTACL 2 HOL FLANG XPOSD TF TYP SMA1040 mail: sales@atlanticmicrowavecouk

52 SMA Series Panel Mount Solder Pot Terminal PANL MOUNT PLUG RCPTACL 4 HOL SQ FLANG BLUNT POST SMA1041 PANL MOUNT PLUG RCPTACL 2 HOL FLANG BLUNT POST SMA1042 PANL MOUNT JACK RCPTACL 4 HOL SQ FLANG BLUNT POST SMA1043 SMA PANL MOUNT JACK RCPTACL 2 HOL FLANG BLUNT POST SMA1044 mail: sales@atlanticmicrowavecouk

53 SMA Series Panel Mount Slot Pot Terminal PANL MOUNT PLUG RCPTACL 4 HOL SQ FLANG SMA1045 Size of slot width: 03, 05 & 07 PANL MOUNT PLUG RCPTACL 2 HOL FLANG SMA1046 Size of slot width: 03, 05 & 07 PANL MOUNT JACK RCPTACL 4 HOL SQ FLANG SMA SMA1047 Size of slot width: 03, 05 & 07 PANL MOUNT JACK RCPTACL 2 HOL FLANG SMA1048 Size of slot width: 03, 05 & 07 mail: sales@atlanticmicrowavecouk

54 SMA Series Panel Mount Half Round Pot Terminal PANL MOUNT PLUG RCPTACL 4 HOL SQ FLANG SMA1049 PANL MOUNT PLUG RCPTACL 2 HOL FLANG SMA1050 PANL MOUNT JACK RCPTACL 4 HOL SQ FLANG SMA1051 SMA PANL MOUNT JACK RCPTACL 2 HOL FLANG SMA1052 mail: sales@atlanticmicrowavecouk

55 SMA Series Panel Mount Terminal Flush to Below Flange PANL MOUNT PLUG RCPTACL 4 HOL SQ FLANG SMA1053 Pin size of d = 015", 018" PANL MOUNT PLUG RCPTACL 2 HOL FLANG SMA1054 Pin size of d = 015", 018" PANL MOUNT JACK RCPTACL 4 HOL SQ FLANG SMA SMA1055 Pin size of d = 015", 018" PANL MOUNT JACK RCPTACL 2 HOL FLANG SMA1056 Pin size of d = 015", 018" mail: sales@atlanticmicrowavecouk

56 SMA Series Panel Mount Tab Terminal PANL MOUNT PLUG RCPTACL 4 HOL SQ FLANG SMA1057 PANL MOUNT PLUG RCPTACL 2 HOL FLANG SMA1058 PANL MOUNT JACK RCPTACL 4 HOL SQ FLANG SMA1059 SMA PANL MOUNT JACK RCPTACL 2 HOL FLANG SMA1060 mail: sales@atlanticmicrowavecouk

57 SMA Series Miniature InSeries Adapter PLUG TO PLUG ADAPTR SMA1061 JACK TO JACK ADAPTR SMA1062 JACK TO JACK ADAPTR SMA SMA1063 JACK TO JACK ADAPTR BULKHAD FDTHROUGH SMA1064 mail:

58 SMA Series Miniature InSeries Adapter PLUG TO JACK ADAPTR SMA1065 PLUG TO JACK ADAPTR RIGHT ANGL SMA1066 JACK TO JACK TO JACK "T" ADAPTR SMA1067 SMA JACK TO PLUG TO JACK "T" ADAPTR SMA1068 mail:

59 SMB/SMC Series SMB/SMC subminiature coaxial connectors with 50 ohm impedance have a performance up to 4 GHz on SMB series and up to 10 GHz on SMC series The SMB series is featured with a quick connect/disconnect snapon mating structure, while the SMC series has #1032UNF threaded coupling in screwon designs SMZ (BT43) connectors are also available on request, constructed with 75 ohm impedance feature performing DC up to 3 GHz SMB/SMC series offer a costeffective alternative for microwave telephone and other nondefence telecommunication application SMB/SMC Connectors Specification Crimp Attachment for Flexible Cable Crimp Termination for Flexible Cable Direct Solder for SemiRigid Cable Printed Circuit Board Bulkhead Mount Solder Pot Terminal SMB / SMC mail: sales@atlanticmicrowavecouk

60 SMB/SMC Series Specification LCTRICAL SMB Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance SMC Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 50 ohm 04 GHz RG178 : 250 VRMS max at sea level RG316, 085" : 335 VRMS max at sea level RG178 :750 VRMS min at sea level RG316, 085" : 1000 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 6 Milliohms Max Outer Contact : 25 Milliohms Max 1000 megohms min 50 ohm 010 GHz RG178 : 250 VRMS max at sea level RG316, 085" : 335 VRMS max at sea level RG178 :750 VRMS min at sea level RG316, 085" : 1000 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 6 Milliohms Max Outer Contact : 25 Milliohms Max 1000 megohms min SMB / SMC MATRIAL Parts Name Body, Metal Parts Center Contacts Insulators Gaskets Crimp Ferrules Material Brass per QQB626 Male : Brass per QQB626 Female : Beryllium copper per QQC530 PTF Silicone rubber Annealed copper Finish Nickel or Gold per requirement Gold plated Gold plated None None Nickel or Gold per requirement Note : Other Material / Finish is Available on Request MCHANICAL ngagement Force Disengagement Force Coupling Nut Retention Coupling Proof Torgue Contact Retention Durability ( Mating ) SMB 14 lbs max 14 lbs max Not applicable Not applicable 4 lbs min 500 cycles min SMC 16 inozs max 16 inozs max 35 lbs min 100 inozs 4 lbs min 500 cycles min mail: sales@atlanticmicrowavecouk

61 SMB/SMC Series Specification INTRFAC MATING DIMNSIONS ( SMB ) Letter A B C D F G PLUG Millimeters Minimum Maximum Letter A B C D F G H I J K L JACK Millimeters Minimum Maximum SMB / SMC NOT 1 : NOT 2 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 048/053 MM DIA PIN MUST MT TH FORC TO NGAG AND DISNGAG WHN MATD WITH MATING PART mail: sales@atlanticmicrowavecouk

62 SMB/SMC Series Specification INTRFAC MATING DIMNSIONS ( SMC ) SMB / SMC Letter A B C D F G H J PLUG Millimeters Minimum Maximum Letter A B C D F G H J K JACK Millimeters Minimum Maximum NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 048/053 MM DIA PIN mail: sales@atlanticmicrowavecouk

63 SMB/SMC Series Crimp Attachment for Flexible Cable STRAIGHT PLUG SMB1001 SMC1001 RG174/U, 188/U, 316/U, 196/U STRAIGHT JACK SMB1002 SMC1002 RG174/U, 188/U, 316/U, 196/U BULKHAD FDTHROUGH JACK SMB1003 SMC1003 RG174/U, 188/U, 316/U, 196/U SMB / SMC mail: sales@atlanticmicrowavecouk

64 SMB/SMC Series Crimp Termination for Flexible Cable RIGHT ANGL PLUG SMB1004 SMC1004 RG174/U, 188/U, 316/U RIGHT ANGL PLUG SMB1005 RG174/U, 188/U, 316/U Diecast Version RIGHT ANGL JACK SMB1006 SMC1006 RG174/U, 188/U, 316/U SMB / SMC mail: sales@atlanticmicrowavecouk

65 SMB/SMC Series Direct Solder for SemiRigid Cable STRAIGHT CABL PLUG S SMB1007 SMC " Cable A=22 min, B=30 min RIGHT ANGL CABL PLUG SMB1008 SMC " Cable A=22 min, B=30 min T SMB / SMC mail: sales@atlanticmicrowavecouk

66 SMB/SMC Series Printed Circuit Board Straight Terminal STRAIGHT PLUG FOR PC BOARD SMB1009 SMC1009 Mounting hole Dia See TYP "B" on page 198 STRAIGHT JACK FOR PC BOARD SMB1010 SMC1010 Mounting hole Dia See TYP "B" on page 198 RIGHT ANGL PLUG FOR PC BOARD SMB1011 SMC1011 Mounting hole Dia See TYP "B" on page 198 SMB / SMC RIGHT ANGL JACK FOR PC BOARD SMB1012 SMC1012 Mounting hole Dia See TYP "B" on page 198 mail: sales@atlanticmicrowavecouk

67 SMB/SMC Series Bulkhead Mount Solder Pot Terminal BULKHAD JACK RCPTACL FRONT MOUNT SMB1013 SMC1013 BULKHAD JACK RCPTACL RAR MOUNT SMB1014 SMC1014 SMB / SMC mail: sales@atlanticmicrowavecouk

68 BNC Series BNC coaxial connectors are characterised with quick disconnect bayonet coupling, small size, and low cost features, ideal for the applications where impedance match is critical The 50 ohm impedance BNC connectors perform DC through 4 GHz, while the 75 ohm connectors perform DC up to 1 GHz Cable terminations are available in both crimp and clamp type with soldered inner contact BNC series connectors are widely used in video and telecommunication applications BNC Connectors Specification Crimp Attachment for Flexible Cable TwistOn Attachment for Flexible Cable Clamp Attachment for Flexible Cable Direct Solder for SemiRigid Cable Printed Circuit Board Bulkhead Receptacle Solder Pot Terminal Panel Receptacle Solder Pot Terminal Adapter BNC mail: sales@atlanticmicrowavecouk

69 BNC Series Specification LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 50 ohm 04 GHz 500 VRMS max at sea level 1500 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 3 Milliohms Max Outer Contact : 2 Milliohms Max 5000 megohms min 75 ohm 02 GHz 500 VRMS max at sea level 1500 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 3 Milliohms Max Outer Contact : 2 Milliohms Max 5000 megohms min MATRIAL Parts Name Body, Metal Parts Center Contacts Insulators Crimp Ferrules Clamp Gaskets Material Brass per QQB626 Male : Brass per QQB626 Female : Beryllium copper per QQC530 or Phosphor Bronze per QQB750 Teflon, Delrin, PBT polyester Annealed copper Silicone rubber, Synthetic rubber Finish Nickel plated Gold or Silver per requirement Gold or Silver per requirement None Nickel or Silver per requirement None Note : Other Material / Finish is Available on Request BNC MCHANICAL ngagement Force Disengagement Force Coupling Nut Retention Contact Retention Durability ( Mating ) 25 inlbs max torque 3 lbs max axial force 100 lbs min 6 lbs min 500 cycles min (for Beryllium copper female contact only ) mail: sales@atlanticmicrowavecouk

70 BNC Series Specification INTRFAC MATING DIMNSIONS Letter A B C D F L N P Q R PLUG Millimeters Minimum Maximum 991 Flared To Meet Good lectrical Contact Letter A B C D F G H I J K L M N P R S JACK Millimeters Minimum Maximum BNC NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 132/137 MM DIA PIN mail: sales@atlanticmicrowavecouk

71 BNC Series Crimp Attachment for Flexible Cable STRAIGHT PLUG SINGL CRIMP BNC1001A *Brass Shell BNC1001B *Diecast Shell RG58/U, 59/U PVC Jacket Plenum RG58/U, 59/U, Teflon Jacket *Only for Solid center Conductor Cable STRAIGHT PLUG CAPTIV CONTACT BNC1002A *Brass Shell BNC1002B *Diecast Shell RG58/U, 59/U, 141/U, 140/U PVC Jacket *For RG62A/U should be with a small bushing STRAIGHT PLUG CAPTIV CONTACT BNC1003A *Brass Shell BNC1003B *Diecast Shell Plenum RG58/U, 59/U Teflon Jacket STRAIGHT PLUG NON CAPTIV CONTACT F BNC BNC1004A *Brass Shell BNC1004B *Diecast Shell RG174/U, 179/U, 188/U, 316/U *With Delrin sleeve *Hex crimp size 178" mail: sales@atlanticmicrowavecouk

72 BNC Series Crimp Attachment for Flexible Cable STRAIGHT PLUG PIN IN PIN BNC1005A *Brass Shell BNC1005B *Diecast Shell RG174/U, 179/U, 188/U, 316/U *Hex crimp size 128" 4WAY INDNT CRIMP TOOL FOR CNTR PIN CRIMP TOOL FOR FRRUL HX CRIMP SIZ 128" NO:C / T001 NO:C / T002 STRAIGHT PLUG NON CAPTIV CONTACT G BNC1006A *Brass Shell BNC1006B *Diecast Shell RG179/U, 187/U, 75 ohm Cable TPX Insulator 75 ohm Available Only STRAIGHT PLUG BNC1007 RG11/U, 213/U, 9913 BNC mail: sales@atlanticmicrowavecouk

73 BNC Series Crimp Attachment for Flexible Cable STRAIGHT JACK BNC1008A *Teflon/Captured BNC1008B *Delrin/NonCaptured RG58/U, 59/U, 141/U, 140/U PVC Jacket *For RG62A/U should be with a small bushing STRAIGHT JACK BNC1009A *Teflon/Captured BNC1009B *Delrin/NonCaptured Plenum RG58/U, 59/U Teflon Jacket STRAIGHT JACK NON CAPTIV CONTACT F BNC1010 RG174/U, 179/U, 188/U, 316/U *With Delrin sleeve *Hex crimp size 178" STRAIGHT JACK PIN IN PIN BNC BNC1011 RG174/U, 188/U, 316/U *Hex crimp size 128" mail: sales@atlanticmicrowavecouk

74 BNC Series Crimp Attachment for Flexible Cable RIGHT ANGL PLUG BNC1012A *Brass Shell BNC1012B *Diecast Shell RG58/U, 59/U, 141/U, 140/U PVC Jacket *Cable Center Conductor solder with pin directly RIGHT ANGL PLUG BNC1013A *Brass Shell BNC1013B *Diecast Shell Plenum RG58/U, 59/U, Teflon Jacket *Cable Center Conductor solder with pin directly RIGHT ANGL PLUG BNC1014A *Brass Shell BNC1014B *Diecast Shell RG174/U, 179/U, 188/U, 316/U *Cable Center Conductor solder with pin directly *Hex crimp size 178" RIGHT ANGL PLUG BNC1015A *Brass Shell BNC1015B *Diecast Shell RG58/U, 59/U, 141/U, 140/U PVC Jacket *For RG62A/U should be with a small bushing *Crimp / Crimp Type BNC mail: sales@atlanticmicrowavecouk

75 BNC Series Crimp Attachment for Flexible Cable RIGHT ANGL PLUG BNC1016A *Brass Shell BNC1016B *Diecast Shell Plenum RG58/U, 59/U, Teflon Jacket *Crimp / Crimp Type RIGHT ANGL PLUG F BNC1017A *Brass Shell BNC1017B *Diecast Shell RG174/U, 188/U, 316/U *With Delrin sleeve *Hex crimp size 178" *Crimp / Crimp Type BULKHAD JACK BNC1018A *Teflon/Captured BNC1018B *Delrin/NonCaptured RG58/U, 59/U, 141/U, 140/U, PVC Jacket *For RG62A/U should be with a small bushing *35 m/m Max panel BULKHAD JACK BNC BNC1019A *Teflon/Captured BNC1019B *Delrin/NonCaptured RG58/U, 59/U, 141/U, 140/U, PVC Jacket *For RG62A/U should be with a small bushing *65 m/m Max panel mail: sales@atlanticmicrowavecouk

76 BNC Series Crimp Attachment for Flexible Cable BULKHAD JACK BNC1020A *Teflon/Captured BNC01020B *Delrin/NonCaptured Plenum RG58/U, 59/U, Teflon Jacket *35 m/m Max panel BULKHAD JACK BNC1021A *Teflon/Captured BNC1021B *Delrin/NonCaptured Plenum RG58/U, 59/U, Teflon Jacket *65 m/m Max panel BULKHAD JACK NON CAPTIV F BNC1022 RG174/U, 179/U, 188/U, 316/U *With Delrin sleeve *Hex crimp size 178" *35 m/m Max panel BULKHAD JACK PIN IN PIN BNC1023 RG174/U, 188/U, 316/U *Hex crimp size 128" *50 m/m Max panel BNC mail: sales@atlanticmicrowavecouk

77 BNC Series Crimp Attachment for Flexible Cable BULKHAD ISOLATD JACK BNC1024A *Teflon/Captured BNC1024B *Delrin/NonCaptured RG58/U, 59/U, 141/U, 140/U, PVC Jacket *For RG62A/U should be with a small bushing *60 m/m Max panel BULKHAD ISOLATD JACK BNC1025A *Teflon/Captured BNC1025B *Delrin/NonCaptured Plenum RG58/U, 59/U, Teflon Jacket *60 m/m Max panel BULKHAD ISOLATD JACK NON CAPTIV F BNC1026 RG174/U, 179/U, 188/U, 316/U *With Delrin sleeve *Hex crimp size 178" *60 m/m Max panel BNC mail: sales@atlanticmicrowavecouk

78 BNC Series TwistOn Attachment for Flexible Cable TWISTON PLUG K BNC1027A *Brass Shell BNC1027B *Diecast Shell RG58/U, 59/U, PVC Jacket Plenum RG58/U, 59/U, Teflon Jacket *Only for solid center conductor cable TWISTON JACK K BNC1028 RG58/U, 59/U, PVC Jacket Plenum RG58/U, 59/U, Teflon Jacket *Only for solid center conductor cable BNC mail: sales@atlanticmicrowavecouk

79 BNC Series Clamp Attachment for Flexible Cable STRAIGHT SOLDR PLUG CAPTIV CONTACT I BNC1029A *Brass Shell BNC1029B *Diecast Shell RG58/U, 59/U, PVC Jacket Plenum RG58/U, 59/U, Teflon Jacket *Barrel OD: fl125 m/m STRAIGHT SOLDR PLUG NON CAPTIV CONTACT H BNC1030A *Brass Shell BNC1030B *Diecast Shell RG58/U, 59/U, PVC Jacket *UG88/U, UG260/U STRAIGHT SOLDR JACK CAPTIV CONTACT I BNC1031 RG58/U, 59/U, PVC Jacket Plenum RG58/U, 59/U, Teflon Jacket BNC mail: sales@atlanticmicrowavecouk

80 BNC Series Direct Solder for SemiRigid 085" or 141" Cable STRAIGHT CABL PLUG S BNC " Cable A=22min, B=30min 141" Cable A=36min, B=46min BULKHAD CABL JACK S BNC " Cable A=22min, B=30min 141" Cable A=36min, B=46min PANL MOUNT CABL JACK S BNC " Cable A=22min, B=30min 141" Cable A=36min, B=46min BNC mail: sales@atlanticmicrowavecouk

81 BNC Series Printed Circuit Board Straight R/A Terminal STRAIGHT PCB MOUNT JACK BNC1035 Mounting hole Dia See TYP "C" on page 198 STRAIGHT PCB MOUNT JACK BNC1036 Mounting hole Dia See TYP "" on page 198 STRAIGHT PCB MOUNT JACK BNC1037 Mounting hole Dia See TYP "F" on page 198 STRAIGHT PCB MOUNT JACK BNC BNC1038A *White Housing BNC1038B *Black Housing Mounting hole Dia See TYP "G" on page 198 mail:

82 BNC Series Printed Circuit Board Straight R/A Terminal STRAIGHT PCB MOUNT JACK BNC1039 *Metal Housing *Mounting hole Dia See TYP "G" on page 198 RIGHT ANGL PCB MOUNT JACK BNC1040A 1 Highprofile/White BNC1040B 1 Highprofile/Black BNC1040C ➁ Lowprofile/White BNC1040D ➁ Lowprofile/Black m/m ➁ 131m/m *Mounting hole Dia See TYP "H" on page 198 RIGHT ANGL PCB MOUNT JACK BNC1041A B6252HA 1 1 BNC1041B B6252HB ➁ 1 1 Highprofile 1588m/m ➁ Lowprofile 131m/m *Metal Housing *Mounting hole Dia See TYP "H" on page 198 BNC mail: sales@atlanticmicrowavecouk

83 BNC Series Bulkhead Receptacle Solder Pot Terminal BULKHAD RCPTACL JACK BNC1042A 1 BNC1042B ➁ BNC1042C ➂ 1 L1=32 Max panel, L =267 m/m ➁ L1=65 Max panel, L =300 m/m ➂ L1=95 Max panel, L =33 m/m BULKHAD RCPTACL JACK BNC1043 *Diecast Body *Stamping Contact *Low cost BULKHAD RCPTACL ISOLATD JACK BNC1044 *Isolated from ground *32 m/m Max panel BNC mail: sales@atlanticmicrowavecouk

84 BNC Series Panel Receptacle Solder Pot Terminal PANL RCPTACL JACK BNC1045 Bulkhead Feedthrough Adapter JACK TO JACK BULKHAD ADAPTR BNC1046 *8m/m Max panel *M55339/ JACK TO JACK BULKHAD ADAPTR BNC1047 *Without gasket *55m/m Max panel BNC mail:

85 BNC Series Bulkhead Isolated Ground Adapter JACK TO JACK BULKHAD ISOLATD ADAPTR BNC1048 *With Isolated Bushing *45m/m Max panel JACK TO JACK BULKHAD ISOLATD ADAPTR BNC1049 *With Isolated Washers *32m/m Max panel JACK TO JACK BULKHAD ISOLATD ADAPTR BNC1050 *Isolated from ground *55 m/m Max panel BNC mail:

86 BNC Series Adapter JACK TO JACK ADAPTR BNC1051 JACK TO JACK ADAPTR BNC1052 PLUG TO PLUG ADAPTR BNC1053A *Brass Shell BNC1053B *Diecast Shell RIGHT ANGL ADAPTR PLUG TO JACK BNC1054A *Brass Shell BNC1054B *Diecast Shell BNC mail:

87 BNC Series Tee Adapter T ADAPTR JACK TO JACK TO JACK BNC1055 T ADAPTR JACK TO PLUG TO JACK BNC1056A *Brass Shell BNC1056B *Diecast Shell T ADAPTR JACK TO PLUG TO JACK BNC1057 *Diecast Version *Stamping contact *T contact pin isolated completely *PATNT NO:79778 BNC mail: sales@atlanticmicrowavecouk

88 TNC Series TNC series connectors are similar to the BNC connector with a miniature size, but feature a threaded coupling nut This series is perfect for the applications where vibration resistance is required Both 50 ohm and 75 ohm are available, which perform DC up to 11 GHz and 1 GHz respectively TNC connectors are widely used in the applications of antenna, satellite, ATM machines, data communication TNC Connectors Specification Crimp Attachment for Flexible Cable Twiston Attachment for Flexible Cable Clamp Attachment for Flexible Cable Direct Solder for SemiRigid Cable Printed Circuit Board Panel Receptacle Solder Pot Terminal Bulkhead Receptacle Solder Pot Terminal Adapter TNC mail: sales@atlanticmicrowavecouk

89 TNC Series Specification LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 50 ohm 011 GHz 500 VRMS max at sea level 1500 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 3 Milliohms Max Outer Contact : 2 Milliohms Max 5000 megohms min 75 ohm 02 GHz 500 VRMS max at sea level 1500 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 3 Milliohms Max Outer Contact : 2 Milliohms Max 5000 megohms min MATRIAL Parts Name Body, Metal Parts Center Contacts Insulators Crimp Ferrules Clamp gaskets Material Brass per QQB626 Male : Brass per QQB626 Female : Beryllium copper per QQC530 or Phosphor Bronze per QQB750 Teflon, Delrin, PBT polyester Annealed copper Silicone rubber, Synthetic rubber Finish Nickel plated Gold or Silver per requirement Gold or Silver per requirement None Nickel or Silver per requirement None Note : Other Material / Finish is Available on Request MCHANICAL ngagement Force Disengagement Force Coupling Nut Retention Coupling Proof Torque Contact Retention Durability ( Mating ) 2 inlbs max 2 inlbs max 100 lbs min 15 inlbs min 6 lbs min 500 cycles min ( for Beryllium copper female contact only ) TNC mail: sales@atlanticmicrowavecouk

90 TNC Series Specification INTRFAC MATING DIMNSIONS Letter A B C D F G H J K M N P Q PLUG Millimeters Minimum Maximum Flared To Meet Good lectrical Contact Letter A B C D F G H J K L M N P R S JACK Millimeters Minimum Maximum NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 132/137 MM DIA PIN TNC mail: sales@atlanticmicrowavecouk

91 TNC Series Crimp Attachment for Flexible Cable STRAIGHT PLUG CAPTIV CONTACT TNC1001 RG58/U, 59/U, 141/U, 140/U PVC Jacket *For RG62A/U should be with a small bushing STRAIGHT PLUG CAPTIV CONTACT TNC1002 Plenum RG58/U, 59/U Teflon Jacket STRAIGHT PLUG NON CAPTIV CONTACT F TNC1003 RG174/U, 179/U, 188/U, 316/U *With delrin sleeve *Hex crimp size 178" STRAIGHT PLUG PIN IN PIN TNC1004 RG174/U, 179/U, 188/U, 316/U *Hex crimp size 128" TNC mail: sales@atlanticmicrowavecouk

92 TNC Series Crimp Attachment for Flexible Cable 4WAY INDNT CRIMP TOOL FOR CNTR PIN CRIMP TOOL FOR FRRUL HX CRIMP SIZ 128" NO:C / T001 NO:C / T002 STRAIGHT PLUG NON CAPTIV CONTACT G TNC1005 RG179/U, 187/U, 75 ohm Cable TPX Insulator 75 ohm Available Only STRAIGHT JACK TNC1006A *Teflon/Captured TNC1006B *Delrin/nonCaptured RG58/U, 59/U, 141/U, 140/U PVC Jacket *For RG62A/U should be with a small bushing STRAIGHT JACK TNC1007A*Teflon/Captured TNC1007B*Delrin/NonCaptured Plenum RG58/U, 59/U Teflon Jacket TNC mail: sales@atlanticmicrowavecouk

93 TNC Series Crimp Attachment for Flexible Cable STRAIGHT JACK NON CAPTIV CONTACT F TNC1008 RG174/U, 179/U, 188/U, 316/U *With Delrin sleeve *Hex crimp size 178" STRAIGHT JACK PIN IN PIN TNC1009 RG174/U, 188/U, 316/U *Hex crimp size 128" RIGHT ANGL PLUG TNC1010 RG58/U, 59/U, 141/U, 140/U PVC Jacket *Cable center conductor solder with pin directly RIGHT ANGL PLUG TNC1011 Plenum RG58/U, 59/U Teflon Jacket *Cable center conductor solder with pin directly TNC mail: sales@atlanticmicrowavecouk

94 TNC Series Crimp Attachment for Flexible Cable RIGHT ANGL PLUG TNC1012 RG174/U, 179/U, 188/U, 316/U *Cable center conductor solder with pin directly *Hex crimp size 178" RIGHT ANGL PLUG TNC1013 RG58/U, 59/U, 141/U, 140/U PVC Jacket *For RG62A/U should be with a small bushing *Crimp / Crimp Type RIGHT ANGL PLUG TNC1014 Plenum RG58/U, 59/U Teflon Jacket *Crimp / Crimp Type RIGHT ANGL PLUG F TNC1015 RG174/U, 179/U, 188/U, 316/U *With Delrin sleeve *Hex crimp size 178" *Crimp / Crimp Type TNC mail: sales@atlanticmicrowavecouk

95 TNC Series Crimp Attachment for Flexible Cable BULKHAD JACK TNC1016A *Teflon/Captured TNC1016B *Delrin/NonCaptured RG58/U, 59/U, 141/U, 140/U PVC Jacket *For RG62A/U should be with a small bushing *35m/m Max panel BULKHAD JACK TNC1017A *Teflon/Captured TNC1017B *Delrin/NonCaptured RG58/U, 59/U, 141/U, 140/U PVC Jacket *For RG62A/U should be with a small bushing *65m/m Max panel BULKHAD JACK TNC1018A *Teflon/Captured TNC1018B *Delrin/NonCaptured Plenum RG58/U, 59/U Teflon Jacket *35m/m Max panel BULKHAD JACK TNC1019A *Teflon/Captured TNC1019B *Delrin/NonCaptured Plenum RG58/U, 59/U Teflon Jacket *65m/m Max panel TNC mail: sales@atlanticmicrowavecouk

96 TNC Series Crimp Attachment for Flexible Cable BULKHAD JACK NON CAPTIV F TNC1020 RG174/U, 179/U, 188/U, 316/U *With Delrin sleeve *Hex crimp size 178" *35m/m Max panel BULKHAD JACK PIN IN PIN TNC1021 RG174/U, 188/U, 316/U *Hex crimp size 128" *50m/m Max panel BULKHAD ISOLATD JACK TNC1022A *Teflon/Captured TNC1022B *Delrin/NonCaptured RG58/U, 59/U, 141/U, 140/U PVC Jacket *For RG62A/U should be with a small bushing *60m/m Max panel BULKHAD ISOLATD JACK TNC1023A *Teflon/Captured TNC1023B *Delrin/NonCaptured Plenum RG58/U, 59/U Teflon Jacket *60m/m Max panel TNC mail: sales@atlanticmicrowavecouk

97 TNC Series Crimp Attachment for Flexible Cable BULKHAD ISOLATD JACK NON CAPTIV F TNC1024 RG174/U, 179/U, 188/U, 316/U *With Delrin sleeve *Hex crimp size 178" *60m/m Max panel Twiston Attachment for Flexible Cable TWISTON PLUG K TNC1025 RG58/U, 59/U, PVC Jacket Plenum RG58/U, 59/U Teflon Jacket *Only for solid center conductor cable TWISTON JACK K TNC1026 RG58/U, 59/U, PVC Jacket Plenum RG58/U, 59/U Teflon Jacket *Only for solid center conductor cable TNC mail: sales@atlanticmicrowavecouk

98 TNC Series Clamp Attachment for Flexible Cable STRAIGHT SOLDR PLUG CAPTIV CONTACT I TNC1027 RG58/U, 59/U, PVC Jacket Plenum RG58/U, 59/U Teflon Jacket Barrel OD: 125 m/m STRAIGHT SOLDR PLUG H TNC1028 RG58/U, 59/U, PVC Jacket STRAIGHT SOLDR JACK CAPTIV CONTACT I TNC1029 RG58/U, 59/U, PVC Jacket Plenum RG58/U, 59/U Teflon Jacket TNC mail: sales@atlanticmicrowavecouk

99 TNC Series Direct Solder for Semi Rigid 085" or 141" Cable STRAIGHT CABL PLUG S TNC " cable A=22 min, B=30 min 141" cable A=36 min, B=46 min BULKHAD CABL JACK S TNC " cable A=22 min, B=30 min 141" cable A=36 min, B=46 min PANL MOUNT CABL JACK S TNC " cable A=22 min, B=30 min 141" cable A=36 min, B=46 min TNC mail: sales@atlanticmicrowavecouk

100 TNC Series Printed Circuit Board Straight R/A Terminal STRAIGHT PCB MOUNT JACK TNC1033A *White Housing TNC1033B *Black Housing Mounting hole Dia see TYP "G" on page 198 STRAIGHT PCB MOUNT JACK TNC1034 *Metal housing *Mounting hole Dia see TYP "G" on page 198 RIGHT ANGL PCB MOUNT JACK TNC1035A 1 Highprofile White TNC1035B 1 Highprofile Black TNC1035C ➁ Lowprofile White TNC1035D ➁ Lowprofile Black m/m, ➁ 131 m/m *Mounting hole Dia see TYP "H" on page 198 RIGHT ANGL PCB MOUNT JACK TNC1036A 1 Highprofile TNC1036B ➁ Lowprofile m/m, ➁ 131 m/m *Metal Housing *Mounting hole Dia see TYP "H" on page 198 TNC mail: sales@atlanticmicrowavecouk

101 TNC Series Panel Receptacle Solder Pot Terminal PANL RCPTACL JACK TNC1037 Bulkhead Receptacle Solder Pot Terminal BULKHAD RCPTACL JACK TNC1038A 1 TNC1038B ➁ TNC1038C ➂ 1 L1=32 Max panel L=267m/m ➁ L1=65 Max panel L=30m/m ➂ L1=95 Max panel L=33m/m BULKHAD RCPTACL ISOLATD JACK TNC1039 *Isolated from ground *32 m/m Max panel TNC mail: sales@atlanticmicrowavecouk

102 TNC Series Bulkhead Feedthrough Adapter JACK TO JACK BULKHAD ADAPTR TNC1040 *8 m/m Max panel JACK TO JACK BULKHAD ADAPTR TNC1041 *Without gasket *55 m/m Max panel JACK TO JACK BULKHAD ISOLATD ADAPTR TNC1042 *With isolated bushing *45 m/m Max panel TNC mail:

103 TNC Series Adapter JACK TO JACK ADAPTR TNC1043 JACK TO JACK ADAPTR TNC1044 PLUG TO PLUG ADAPTR TNC1045 RIGHT ANGL ADAPTR PLUG TO JACK TNC1046 TNC mail:

104 TNC Series T Adapter T ADAPTR JACK TO JACK TO JACK TNC1047 T ADAPTR JACK TO PLUG TO JACK TNC1048 TNC mail: sales@atlanticmicrowavecouk

105 N Series N N coaxial connectors are medium sized precision connectors with 50 ohm impedance structure performing DC up to 11 GHz A 75 ohm N specification performing DC through 15 GHz is now offered to customers for wider usage Cable entry includes clamp terminations and crimp terminations Applications for this series include base station equipment, broadcast and satellite communication systems, as well as test and instrument industries N Connectors Specification Crimp Attachment for Flexible Cable Direct Solder for SemiRigid Cable Panel Mount Solder Feedthrough Adapter mail: sales@atlanticmicrowavecouk

106 N Series N Specification LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 50 ohm 011 GHz 1000 VRMS max at sea level 2500 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 3 Milliohms Max Outer Contact : 2 Milliohms Max 5000 megohms min MATRIAL Parts Name Body, Metal Parts Center Contacts Insulators Crimp Ferrules Clamp gaskets Material Brass per QQB626 Male : Brass per QQB626 Female : Beryllium copper per QQC530 or Phosphor Bronze per QQB750 PTF Annealed copper Silicone rubber, Synthetic rubber Finish Nickel or Silver per requirement Gold or Silver per requirement Gold or Silver per requirement None Nickel or Silver per requirement None Note : Other Material / Finish is Available on Request MCHANICAL ngagement Force Disengagement Force Coupling Nut Retention Coupling Proof Torque Contact Retention Durability ( Mating ) 6 inlbs max 6 inlbs max 100 lbs min 30 inlbs min 6 lbs min 500 cycles min ( for Beryllium copper female contact only ) mail: sales@atlanticmicrowavecouk

107 N Series Specification N INTRFAC MATING DIMNSIONS Letter A B C D F G H I J K PLUG Millimeters Minimum Maximum Letter A B C D F G H I J JACK Millimeters Minimum Maximum NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 16/168 MM DIA PIN mail: sales@atlanticmicrowavecouk

108 N Series N Crimp Attachment for Flexible Cable STRAIGHT PLUG CAPTIV CONTACT N1001 RG58/U, 59/U, 8/U, 213/U PVC Jacket STRAIGHT PLUG PIN IN PIN C N1002 RG174/U, 188/U, 316/U *Hex crimp size 128" STRAIGHT JACK CAPTIV CONTACT N1003 RG58/U, 59/U, 8/U, 213/U PVC Jacket BULKHAD JACK PIN IN PIN C N1004 RG174/U, 188/U, 316/U *Hex crimp size 128" mail: sales@atlanticmicrowavecouk

109 N Series Crimp Attachment for Flexible Cable N BULKHAD JACK CAPTIV CONTACT N1005 RG58/U, 59/U, 8/U, 213/U PVC Jacket *Rear Mount RIGHT ANGL PLUG N1006 RG58/U, 59/U, 214/U, 223/U, 8/U PANL MOUNT CABL JACK N1007 RG58/U mail: sales@atlanticmicrowavecouk

110 N Series N Clamp Attachment for Flexible Cable STRAIGHT SOLDR PLUG CAPTIV CONTACT H N1008 RG58/U, 59/U, 141/U, 140/U PVC Jacket STRAIGHT SOLDR PLUG CAPTIV CONTACT H N1009 RG8/U, 213/U, 214/U, PVC Jacket STRAIGHT SOLDR JACK CAPTIV CONTACT H N1010 RG58/U, 59/U, 141/U, 140/U PVC Jacket STRAIGHT SOLDR JACK CAPTIV CONTACT H N1011 RG8/U, 213/U, 214/U, PVC Jacket mail: sales@atlanticmicrowavecouk

111 N Series Direct Solder for SemiRigid 085" or 141" Cable N STRAIGHT SOLDR PLUG U N " cable A=22min, B=30min 141" cable A=36min, B=46min BULKHAD SOLDR JACK U N " cable A=22min, B=30min 141" cable A=36min, B=46min PANL SOLDR JACK U N " cable A=22min, B=30min 141" cable A=36min, B=46min mail: sales@atlanticmicrowavecouk

112 N Series N Panel Mount Solder Terminal PANL RCPTACL JACK XPOSD TF TYP N1015 *With gasket mail: sales@atlanticmicrowavecouk

113 N Series Panel Mount Solder Slot Terminal N PANL RCPTACL PLUG SOLDR POT TRMINAL N1016 PANL RCPTACL JACK SOLDR POT TRMINAL N1017 PANL RCPTACL PLUG SLOT TRMINAL N1018 Slot width: 03m/m, 05m/m, 07m/m, 09m/m PANL RCPTACL JACK SLOT TRMINAL N1019 Slot width: 03m/m, 05m/m, 07m/m, 09m/m mail: sales@atlanticmicrowavecouk

114 N Series N Feedthrough Adapter PLUG TO PLUG ADAPTR N1020 RIGHT ANGL ADAPTR PLUG TO JACK N1021 JACK TO JACK ADAPTR N1022 JACK TO JACK BULKHAD ADAPTR N1023 mail: sales@atlanticmicrowavecouk

115 N Series Feedthrough Adapter N JACK TO JACK TO JACK "T" ADAPTR N1024 JACK TO PLUG TO JACK "T" ADAPTR N1025 mail: sales@atlanticmicrowavecouk

116 TWIN Series TWIN TWIN series is designed with keyway polarization to insure system integrity and prevent signals from being mixed The TWIN coaxial connectors are designed for use on IBM systems 34 and 38 installations or related network applications where minimum crosstalk and balanced circuits are necessary in interconnecting work stations TWIN Connectors Specification Twin Contacts Keyed 90 mail:

117 TWIN Series Specification TWIN LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance Used with 78 ohm and 95 ohm twin conductor cables Keyway polarization and nonpolarized : 0200 MHz, 0500 MHz with caution Contact polarization : 0100 MHz Keyway polarization and nonpolarized : 500 VRMS max at sea level Contact polarization : 100 VRMS max at sea level 1500 VRMS min at sea level Not defined Center Contact : 4 Milliohms Max Outer Contact : 2 Milliohms Max 1000 megohms min MATRIAL Parts Name Body, Metal Parts Center Contacts Insulators Clamp gaskets Material Brass per QQB626 Male : Brass per QQB626 Female : Beryllium copper per QQC530 or Phosphor Bronze per QQC750 PBT polyester or Noryl Silicone rubber, Synthetic rubber Finish Nickel plated Gold or Silver per requirement Gold or Silver per requirement None None Note : Other Material / Finish is Available on Request MCHANICAL Mating Cable affixment Contact polarization, 2 stud bayonet Keyway polarization : 3/420 threaded Coupling keyed 90 Braid clamp, "V" groove gasket and Clamp nut mechanism mail: sales@atlanticmicrowavecouk

118 TWIN Series Twin Contacts Keyed 90 STRAIGHT PLUG TWX1001 Belden PVC Jacket *IBM *I gold I silver contact are available L TWIN STRAIGHT PLUG L TWX1002 Belden PVC Jacket *UROPAN Type *With delrin bushing *93m/m x 8m/m x 45m/m *I gold I silver contact are available STRAIGHT JACK L TWX1003 Belden IBM BULKHAD RCPTACL JACK TWX1004 IBM mail: sales@atlanticmicrowavecouk

119 TWIN Series Twin Contacts Keyed 90 TWIN JACK TO JACK FDTHROUGH ADAPTR TWX1005 IBM BULKHAD JACK TO JACK ADAPTR TWX1006 T ADAPTR JACK JACK JACK TWX1007 IBM T ADAPTR JACK PLUG JACK TWX1008 IBM mail: sales@atlanticmicrowavecouk

120 UHF & MINIUHF Series UHF / MINIUHF UHF/MiniUHF series are popular and economical and used in the applications where impedance mating is not critical while cost is a prime consideration The UHF connectors are widely used in band radio receivers, public address systems or other related industries The mini UHF connectors are a miniature version of the UHF connectors and can be used in cellular telephone systems UHF/MiniUHF Connectors Specification UHF Series MINIUHF Series mail: sales@atlanticmicrowavecouk

121 UHF & MINIUHF Series Specification UHF / MINIUHF LCTRICAL UHF Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance MINIUHF Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance Nonconstant 0200 MHz 500 VRMS max at sea level 1500 VRMS min at sea level Not defined Center Contact : 3 Milliohms Max Outer Contact : 2 Milliohms Max 5000 megohms min 50 ohmt 02 GHz 335 VRMS max at sea level 1000 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 5 Milliohms Max Outer Contact : 3 Milliohms Max 5000 megohms min MATRIAL UHF Parts Name Body, Metal Parts Center Contacts Insulators Crimp Ferrules Material Brass per QQB626 Male : Brass per QQB626 Female : Brass per QQB626 PTF, PBT polyester, Phenolic Annealed copper Finish Nickel Gold or Silver per requirement Gold or Silver per requirement None Nickel or Silver per requirement MINIUHF Parts Name Body, Metal Parts Center Contacts Insulators Crimp Ferrules Material Brass per QQB626 or Zinc diecast Male : Brass per QQB626 Female : Beryllium Copper QQC530 Phosphor Bronze per QQB750 PTF Annealed copper Finish Nickel Gold or Silver per requirement Gold or Silver per requirement None Nickel or Silver per requirement Note : Other Material / Finish is Available on Request MCHANICAL UHF Matings Cable affixment MINIUHF ngagement Force Disengagement Force Coupling Nut Retention Coupling Proof Torque Contact Retention Durability ( Mating ) 5/824 threaded coupling Braid solder, set screw, clamp and crimp 2 inlbs max 2 inlbs max 80 lbs min 15 inlbs min 6 lbs min 500 cycles min ( for Beryllium copper female contact only ) mail: sales@atlanticmicrowavecouk

122 UHF & MINIUHF Series Specification INTRFAC MATING DIMNSIONS UHF / MINIUHF Letter A B C D F G PLUG Millimeters Minimum Maximum Letter A B C D F G H K JACK Millimeters Minimum Maximum NOT 1 : NOT 2 : FORM OF INNR CONDUCTOR OPTIONAL ID TO MT GOOD LCTRICAL CONTACT WHN MATD WITH 391/401 MM DIA PIN mail: sales@atlanticmicrowavecouk

123 UHF & MINIUHF Series UHF Series STRAIGHT CRIMP PLUG UHF1001 RG58/U, 59/U, 8/U, PVC Jacket UHF / MINIUHF STRAIGHT FCP PLUG O UHF1002 RG58/U, PVC Jacket JACK TO JACK ADAPTR UHF1003 STRAIGHT SOLDR PLUG UG STANDARD N UHF1004 PL259 mail: sales@atlanticmicrowavecouk

124 UHF & MINIUHF Series UHF Series RDUCING ADAPTR UHF1005A 1 UHF1005B ➁ 1 UG175 for RG58/U ➁ UG176 for RG59/U For U1181C1 d= 53mm (U0181A1) d= 65mm (U0181A2) UHF / MINIUHF mail: sales@atlanticmicrowavecouk

125 UHF & MINIUHF Series MINIUHF Series STRAIGHT CRIMP PLUG CAPTIV CONTACT P UHF / MINIUHF MUHF1001 RG58/U, 59/U, 141/U, 140/U PVC Jacket STRAIGHT CRIMP PLUG P MUHF1002 RG58/U, 59/U, 141/U, 140/U PVC Jacket Pin is preassembled STRAIGHT PLUG P MUHF1003 RG58C/U Diecast body STRAIGHT PLUG P MUHF1004 RG174/U, 188/U, 316/U mail: sales@atlanticmicrowavecouk

126 UHF & MINIUHF Series MINIUHF Series STRAIGHT CRIMP JACK NON CAPTIV CONTACT MUHF1005 RG58/U, 59/U, 141/U, 140/U PVC Jacket UHF / MINIUHF STRAIGHT CRIMP JACK MUHF1006 RG58/U PVC Jacket Diecast Version STRAIGHT CRIMP JACK MUHF1007 RG174/U, 188/U, 316/U Diecast Version BULKHAD RCPTACL JACK RAR MOUNT MUHF1008 mail: sales@atlanticmicrowavecouk

127 F Series F F Connectors Crimp Attachment for Flexible Cable Printed Circuit Board TwistOn Attachment for Flexible Cable Adapter Bulkhead Receptacle Solder Pot Terminal mail: sales@atlanticmicrowavecouk

128 F Series Crimp Attachment for Flexible Cable STRAIGHT PLUG V F1001 RG59/U, 6/U WATRPROOF! STRAIGHT PLUG F F1002 RG59/U, 6/U BULKHAD JACK F1003 RG59/U, 6/U mail: sales@atlanticmicrowavecouk

129 F Series Printed Circuit Board Straight R/A Terminal RIGHT ANGL PCB MOUNT JACK F1004 STRAIGHT PCB MOUNT JACK F1005 F TwistOn Attachment for Flexible Cable TWISTON PLUG K F1006 RG59/U, 6/U mail: sales@atlanticmicrowavecouk

130 F Series Adapter RIGHT ANGL ADAPTR PLUG TO JACK F1007 JACK TO JACK BULKHAD ADAPTR F F1008 mail: sales@atlanticmicrowavecouk

131 F Series Bulkhead Receptacle Solder Pot Terminal BULKHAD RCPTACL JACK F1009 RCPTACL JACK F1010 F RCPTACL JACK F1011 mail: sales@atlanticmicrowavecouk

132 Reverse Polarity Series Reverse Polarity connectors are designed for use in spread spectrum wireless applications where a nonstandard interface is needed Reverse Polarity Connectors SMA Reverse Polarity Specification Crimp Attachment Printed Circuit Board BNC & TNC Reverse Polarity Specification BNC Reverse Polarity Crimp Attachment TNC Reverse Polarity Crimp Attachment Panel Mount Solder Pot Terminal Reverse Polarity mail: sales@atlanticmicrowavecouk

133 SMA Reverse Polarity Series Specification LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 50 ohm 0124 GHz on Flexible cable, 0 18 GHz on Simirigid cable RG178 : 170 VRMS max at sea level RG316, 085" : 250 VRMS max at sea level RG142, 141" : 335 VRMS max at sea level RG178 : 500 VRMS min at sea level RG316, 085" : 750 VRMS min at sea level RG142, 141" : 1000 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 6 Milliohms Max Outer Contact : 2 Milliohms Max 5000 megohms min Reverse Polarity MATRIAL Parts Name Body, Metal Parts Center Contacts Insulators Gasket Crimp Ferrules Material Brass per QQB626 or Nonmagnetic stainless steel per QQS764 # 303 Male : Brass per QQB626 Female : Beryllium copper per QQC530 PTF Silicone Rubber Annealed copper Finish Nickel, Gold or passivated per requirement Gold Gold None None Nickel or Gold per requirement Note : Other Material / Finish is Available on Request MCHANICAL ngagement Force Disengagement Force Coupling Nut Retention Coupling Proof Torque Contact Retention Durability ( Mating ) 2 inlbs max 2 inlbs max 60 lbs min 15 inlbs min 6 lbs min 500 cycles min mail: sales@atlanticmicrowavecouk

134 SMA Reverse Polarity Series Specification INTRFAC MATING DIMNSIONS ( SMA Reverse Polarity ) Reverse Polarity Letter A B C D F G PLUG Millimeters Minimum Maximum Letter A B C D F G H J K L JACK Millimeters Minimum Maximum NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 09/094 MM DIA PIN mail: sales@atlanticmicrowavecouk

135 SMA Reverse Polarity Series Crimp Attachment for Flexible Cable STRAIGHT PLUG RSMA1001 RG223/U, 58/U STRAIGHT BULKHAD JACK RSMA1002 RG58/U Reverse Polarity STRAIGHT BULKHAD JACK RSMA1003 RG174/U, 188/U, 316/U RIGHT ANGL PLUG RSMA1004 RG174/U, 188/U, 316/U mail:

136 SMA Reverse Polarity Series Printed Circuit Board R/A Terminal RIGHT ANGL JACK FOR PRINTD CIRCUITS RSMA1005 Mounting hole Dia see Type "A" on page 198 Reverse Polarity mail:

137 BNC & TNC Reverse Polarity Series Specification LCTRICAL Impedance Frequency Range Working Voltage Dielectric Withstanding Voltage VSWR Contact Resistance Insulator Resistance 50 ohm 04 GHz 500 VRMS max at sea level 1500 VRMS min at sea level Straight : 13 max Right Angle : 15 max Center Contact : 3 Milliohms Max Outer Contact : 2 Milliohms Max 5000 megohms min Reverse Polarity MATRIAL Parts Name Body, Metal Parts Center Contacts Insulators Crimp Ferrules Clamp gaskets Material Brass per QQB626 Male : Brass per QQB626 Female : Phosphor Bronze per QQB750 Teflon, Delrin, PBT polyester Annealed copper Silicone rubber, Synthetic rubber Note : Other Material / Finish is Available on Request Finish Nickel or Silver per requirement Gold or Silver per requirement Gold or Silver per requirement None Nickel or Silver per requirement None MCHANICAL ngagement Force Disengagement Force Coupling Nut Retention Contact Retention Durability ( Mating ) 25 inlbs max torque 3 lbs max axial force 100 lbs min 6 lbs min 500 cycles min (for Beryllium copper female contact only ) mail: sales@atlanticmicrowavecouk

138 BNC & TNC Reverse Polarity Series Specification INTRFAC MATING DIMNSIONS ( BNC Reverse Polarity ) Letter A B C D F G H J PLUG Millimeters Minimum Maximum 991 Flared To Meet Good lectrical Contact Letter A B C D F G H J K L M N P Q R S T U V W JACK Millimeters Minimum Maximum Reverse Polarity NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 132/137 MM DIA PIN mail: sales@atlanticmicrowavecouk

139 BNC & TNC Reverse Polarity Series Specification INTRFAC MATING DIMNSIONS ( TNC Reverse Polarity ) Reverse Polarity Letter A B C D F G H J K L PLUG Millimeters Minimum Maximum Flared To Meet Good lectrical Contact Letter A B C D F G H J K L M N P Q R S T U V JACK Millimeters Minimum Maximum NOT 1 : ID TO MT VSWR AND CONTACT RSISTANC WHN MATD WITH 132/137 MM DIA PIN mail: sales@atlanticmicrowavecouk

140 BNC Reverse Polarity Series Crimp Attachment for Flexible Cable STRAIGHT PLUG RBNC1001 RG58/U, 59/U STRAIGHT PLUG RBNC1002 RG213/U, 9913 STRAIGHT JACK Reverse Polarity RBNC1003 RG58/U, 59/U STRAIGHT BULKHAD JACK RBNC1004 RG58/U, 59/U mail:

141 TNC Reverse Polarity Series Crimp Attachment for Flexible Cable STRAIGHT PLUG RTNC1001 RG58/U, 59/U STRAIGHT PLUG RTNC1002 RG213/U, 9913 Reverse Polarity STRAIGHT JACK RTNC1003 RG58/U, 59/U STRAIGHT JACK RTNC1004 RG213/U, 9913 mail:

142 TNC Reverse Polarity Series Crimp Attachment for Flexible Cable STRAIGHT BULKHAD JACK RTNC1005 RG58C/U Reverse Polarity Panel Mount Solder Pot Terminal STRAIGHT PANL RCPTACL JACK RTNC1006 mail:

143 Between Series Adapters Between Series Adapter Type N To 7/16 Type N To SMA Type N To TNC Type N To BNC Type N To FM Type BNC To FM Type FM To MiniUHF Type FM To SMB Type FM To UHF Type BNC To TNC Type TNC To FM Type SMA To TNC Type SMA To BNC Type SMA To UHF Type SMA To MiniUHF Adapters mail: sales@atlanticmicrowavecouk

144 Between Series Adapters Type N To 7/16 N PLUG TO 7/16 PLUG ADAPTR ADT1001 N PLUG TO 7/16 JACK ADAPTR ADT1002 N JACK TO 7/16 PLUG ADAPTR Adapters ADT1003 N JACK TO 7/16 JACK ADAPTR ADT1004 mail: sales@atlanticmicrowavecouk

145 Between Series Adapters Type N To SMA N PLUG TO SMA JACK ADAPTR ADT1005 N PLUG TO SMA PLUG ADAPTR ADT1006 N JACK TO SMA PLUG ADAPTR ADT1007 Adapters N JACK TO SMA JACK ADAPTR ADT1008 mail: sales@atlanticmicrowavecouk

146 Between Series Adapters Type N To TNC N JACK TO TNC PLUG ADAPTR ADT1009 Type N To BNC N JACK TO BNC JACK ADAPTR Adapters ADT1010 N JACK TO BNC PLUG ADAPTR ADT1011 mail: sales@atlanticmicrowavecouk

147 Between Series Adapters Type N To FM N PLUG TO FM PLUG ADAPTR NM1012 Type BNC To FM BNC PLUG TO FM PLUG ADAPTR BM1013 Adapters BNC PLUG TO FM PLUG RIGHT ANGL ADAPTR BM1014 mail: sales@atlanticmicrowavecouk

148 Between Series Adapters Type FM To MiniUHF FM PLUG TO MINIUHF PLUG ADAPTR ADT1015 Adapters Type FM To SMB FM PLUG TO SMB PLUG ADAPTR ADT1016 mail:

149 Between Series Adapters Type FM To UHF FM PLUG TO UHF PLUG ADAPTR ADT1017 Adapters Type BNC To TNC BNC JACK TO TNC PLUG ADAPTR ADT1018 mail:

150 Between Series Adapters Type TNC To FM TNC PLUG TO FM PLUG ADAPTR TM1019 TNC PLUG TO FM PLUG RIGHT ANGL ADAPTR TM1020 Adapters mail:

151 Between Series Adapters Type SMA TO TNC SMA PLUG TO TNC JACK ADAPTR ADT1021 SMA PLUG TO TNC PLUG ADAPTR ADT1022 SMA JACK TO TNC PLUG ADAPTR ADT1023 Adapters mail:

152 Between Series Adapters Type SMA TO BNC SMA JACK T0 BNC PLUG ADAPTR ADT1024 SMA PLUG TO BNC JACK ADAPTR ADT1025 Adapters mail:

153 Between Series Adapters Type SMA TO UHF SMA JACK TO UHF JACK ADAPTR ADT1026 SMA JACK TO UHF PLUG ADAPTR ADT1027 SMA PLUG TO UHF JACK ADAPTR ADT1028 Adapters SMA PLUG TO UHF PLUG ADAPTR ADT1029 mail:

154 Between Series Adapters Type SMA TO MiniUHF SMA JACK T0 MINIUHF JACK ADAPTR ADT1030 SMA PLUG TO MINIUHF JACK ADAPTR ADT1031 Adapters mail:

155 Terminations and Accessories Terminations and Accessories Cap & Chain Terminations Terminations Accessories mail:

156 Terminations and Accessories Cap & Chain BNC MAL CAP & CHAIN B5001N Chain length: 100 m/m TNC MAL CAP & CHAIN T5001N Chain length: 100 m/m UHF MAL CAP & CHAIN U5001N *Chain length: 100 m/m *Suitable for N type Terminations Accessories F MAL CAP & CHAIN F5001N Chain length: 100 m/m mail: sales@atlanticmicrowavecouk

157 Terminations and Accessories Terminations BNC TRMINATION PLUG RSISTOR SPC B4001ND3G50 1 B4001ND3G75 ➁ B4001ND3G93 ➂ 1 1/2 watt, 5%, 50 ohm ➁ 1/2 watt, 5%, 75 ohm ➂ 1/2 watt, 5%, 93 ohm Teflon Insulator is available N TRMINATION PLUG RSISTOR N4001NT3G50 1 watt, 1%, 499 ohm SPC N TRMINATION PLUG RSISTOR N4001NT3G50 1 watt, 1%, 50 ohm SPC N TRMINATION JACK Terminations Accessories RSISTOR N4001NT3G50 1 watt, 1%, 499 ohm SPC mail: sales@atlanticmicrowavecouk

158 Terminations and Accessories Terminations F TRMINATION PLUG RSISTOR F4001NT3G75 1/4 watt, 1%, 75 ohm SPC Terminations Accessories mail: sales@atlanticmicrowavecouk

159 Other Connectors Other Connectors FM Series Crimp Attachment for Flexible Cable Rotating Nipple Adapter DSUB Series Crimp Attachment for Flexible Cable PCB Mount Others mail: