Quantities and distribution BR CF BT IHR TOT

Transcription

1 B. TECHNICAL SPECIFICATIONS FOR LOT 02 Code EQUIPMENT Quantities and distribution BR CF BT IHR TOT 2.01 Audiometers Audiometric Booths Incubators, Infant, Mobile Refrigerators, Laboratory, Double doors, Glass Refrigerators, Laboratory, Vaccine Conservation Scanning Systems, Ultrasonic Sterilization Units, Steam, Tabletop, Flash Warming Units, Patient, Radiant, Infant, Mobile The following specifications are composed by a text and a picture, both are describing the item. In case of discordance text prevails on picture. The pictures have to be intended as representations of the technological level and the construction specifications of the items and not referring to specific commercial brands and models. In some case a Reference Producer and Model have been indicated to better define the specifications. Texts and pictures prevail on Reference Model. Any model technically equivalent to the Reference one will be accepted. ITB-HTOC (PPL) Page 1 of 12

2 Item 2.01 Audiometers Instruments designed to measure and characterize hearing loss Functionality and Performance 4. Microprocessor controlled. 5. Manual and automatic operation. 6. White noise, narrow band and speech noise masking. 7. Pulse and continuous tones. 8. Automatic threshold. 9. Built-in system calibration and self-check modules. 10. Automatic default parameters allowing for fast start up and testing. 11. LCD/TFT graphic visualization. 12. Available stimulators: sound field speakers, THD headphones. 13. Communication: Talk back, talk forward monitor. 14. Pure tone frequencies: Hz. 15. Stimulus levels: -10 to 100dB adjustable in 5 db steps. ITB-HTOC (PPL) Page 2 of 12

3 Item 2.02 Audiometric Booths Audiometric room designed to provide a consistent and controlled acoustic environment and keep background noise at an acceptably low level in order to provide a calibrated acoustical test area that meets requirements for clinical audiometric measurement in patients. Assembling, Installing and Distribution Requirements 1. The tenderer will include a detailed works cost in the economic offer to deliver and install the Audiometric Booths within the available space into the designated area as indicated in the attached Floor Plans. The tenderer will include a detailed works cost in the economic offer to install and connect the previous item 3.5 through the audiometric booth. 2. At least 2 120V, 60Hz mono-phase electrical connections NEMA 5-15 type inside the room. 3. Protections against over-voltage and over-current line conditions. 4. Compliance with applicable Haitian standards and regulations. Functionality and Performance 5. Laminated sound-proof panels 6. Noise attenuation better than 40 db at 8 KHz 7. Triple glass window 8. Door guarantees noise isolation by hermetic close of at least 90 cm. 9. Low noise ventilation system 10. Audio communication system operator-patient Exact Dimensions 11. The Cabin will be installed in the room 26 Cabine de Audiometria in Bon Repos-IHR. 12. Exact measures Max 250X295 Min 240X280 cm. ITB-HTOC (PPL) Page 3 of 12

4 Item 2.03 Incubators, Infant, Mobile Mobile neonatal incubator for low weight babies in-hospital support. Operational characteristics 4. Microprocessor controlled equipment. 5. Mobile equipment with at least 4 castor anti-static and rust-free wheels and two brakes. 6. Double wall transparent shield. 7. Completely tip-up frontal access hatch. 8. At least n 4 access doors with covers and at least n 6 separate tubing ports with related covers. 9. Equipment integrated X-ray tray. 10. Facility to mount IV pole device. 11. Patient removable bed/mattress not smaller than 55 cm (length) x 34 cm (wide). 12. Mattress made by a material flame retardant, washable, antibacterial and resistant to: corrosion, water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 13. Monitoring and controlling at least the following parameters: - Air temperature. - Skin temperature (servo-controlled). - Humidification. 14. Auto-calibration of measurement circuits. 15. LCD/TFT Digital easy to read display with indications about all parameters monitored. 16. Skin temperature control range not smaller than from 35 to 37 C with resolution not higher than 0,1 C. 17. Air temperature control range not smaller than from 28 to 37 C with resolution not higher than 0,1 C. 18. Humidification control range not smaller than from 45% to 70%. 19. Internal equipment noise less than 60 db. 20. Audio and visual alarms for at least: - High/low Air temperature. - High/low Skin temperature (not more than ± 1º C in respect of pre-selected temperature). - Fan failure. - Power failure. - Temperature probes failure. 21. Water tank capacity not less than 1 liter. 22. Oxygen bottle holder. 23. Oxygen bottle of approximately 10 liters, 200 bars, portable and provided with at least the following accessories: flux meter, humidifier and oxygen tubes; 24. One high-pressure regulator with flow control valves used to maintain a pressure of 50 psi and provide a variable oxygen flow rate: - Bull nose type. ITB-HTOC (PPL) Page 4 of 12

5 - Compact size, lightweight and durable metal body. - Impervious to chemical solutions normally used in a clinical setting. - Dial type, without flow tube. - Easy to read, with large numbers for easy flow adjustments. - Capacity of at least 0-25 l/min with at least the following increments: 0.5, 1, 2, 3, 4, 5, 6, 8, 10, 15, 25 l/min neonatal face masks and 10 neonatal nasal cannulas. ITB-HTOC (PPL) Page 5 of 12

6 Item 2.04 Refrigerators, Laboratory - Double doors, Glass Refrigerator for clinical laboratory use, used to preserve blood samples and reagents. Functionality and Performance 4. Low electrical consumption: class A or higher. 5. External construction PVC-coated, anticorrosion and nontoxic hot-zinced plate frame or equivalent. 6. Provided with an inner double glass door for an easy inside observation. 7. Temperature reading: alphanumeric display. 8. Settable temperature range between at least: +2 C to +12 C. 9. Forced internal ventilation, fan cooling system. 10. Refrigerant CFC free. 11. At least 4 internal shelves. 12. Automatic defrost. 13. Capacity of at least 1400 l. 14. Lockable Doors. Acoustic and visual alarms 15. High temperature alarm. 16. Open door alarm. Additional consumables and accessories not included in the bid price: quote each separately: Internat Light Bulbs Control Unit. ITB-HTOC (PPL) Page 6 of 12

7 Item 2.05 Refrigerators, Laboratory - Vaccine Conservation Under counter refrigerator for clinical laboratory use, used to preserve vaccine. Functionality and Performance 4. WHO approved refrigerator 5. Low electrical consumption: class A or higher. 6. External construction PVC-coated, anticorrosion and nontoxic hot-zinced plate frame or equivalent. 7. Settable temperature range between at least: +2 C to +12 C. 8. Forced internal ventilation, fan cooling system. 9. Temperature chart recorder. 10. Built in alarm for temperature outside the operating range of 4-8 degrees. 11. At least 3 internal shelves. 12. Double insulation to maintain operating temperature up to 48 hours in case of power cut. 13. Capacity of at least 120 l. Additional consumables and accessories not included in the bid price: quote each separately: Internal Light Bulbs pack of paper. ITB-HTOC (PPL) Page 7 of 12

8 Item 2.06 Scanning Systems, Ultrasonic General purpose ultrasound equipment used for general gynecological and antenatal diagnosis. 4. Compliance with all other applicable standards. Operational characteristics 1. Trolley with at least 4 wheels with brakes and 1 drawer. 2. Connection of at least 3 probes at the same time plus the probe for the Doppler CW. 3. Monitor LCD/TFT of at least Hard disk of at least 200 GB. 5. Illuminated alphanumeric keyboard. 6. At least one USB port. 7. Frequency range of at least 1 15 MHz. 8. Dynamic range of at least 180 db. 9. Penetration depth of at least 30 cm. 10. Frozen image zoom of at least 10X. 11. Dynamic real time zoom of at least 4X. 12. All software in French language. 13. The hardware and software included in the offer will allow the following application: - cardiac; - abdominal; - muscular; - obstetrical and gynecological; - periferical and deep vascular; - Modes, at least: B, M, PW (Pulsed wave Doppler), CW (Continuous wave Doppler). 14. Allowed measurements: - body marks; - length; - angle; - area; - circumference; - cavities; - speed; - flow. 15. Software included functions, at least: - trapezoidal images; - vascular examinations; - fetal weight indexes table; - production and storage of images and videos; - steering pulsed Doppler. 16. Allowed probes: ITB-HTOC (PPL) Page 8 of 12

9 - linear; - convex; - endocavity; - microconvex; - phased array; - pencil. 17. Included probes: - Convex with at least triple frequency, bandwidth of at least 3Mhz, including 3.5Mhz frequency; - Linear with at least triple frequency, bandwidth of at least 2Mhz, including 6.5Mhz frequency; - phased array with at least triple frequency, bandwidth of at least 5 Mhz including 7 Mhz frequency; - Vaginal probe with at least triple frequency, and Field Of View of, at least, 185. Additional consumables and accessories not included in the bid price: quote each separately: 18. B/W printer for medical ultrasound applications liters of ultrasound gel. ITB-HTOC (PPL) Page 9 of 12

10 Item 2.07 Sterilization Units, Steam, Tabletop, Flash Small tabletop autoclave,, used for quick sterilization of instruments in Operating or ICU environment. Functionality and Performance 4. Control system: Microprocessor. 5. Display of sterilization parameters. 6. Manual operation in case of failure of the automatic control. 7. Sterilization temp: 143 C. 8. Analogue pressure gauge. 9. Capacity of at least 10 l. 10. Reservoir capacity of at least 2-3 l. 11. At least: Vacuum test and Bowie Dick Tests. 12. At least the following cycles available: - flash; - surgical materials; - fabric materials; - vacuum test; - Bovie-Dick test. 13. Separated water reservoir from the steam generator. 14. Front loading. 15. Standard stainless steel set of 2 trays and 1 container. 16. Sterilization verification Strips 10 packs of 100. ITB-HTOC (PPL) Page 10 of 12

11 Item 2.08 Warming Units, Patient, Radiant, Infant, Mobile Mobile open-bassinet equipment designed to provide thermal stability to infants while allowing direct observation, for infants undergoing long treatment in a cool environment and to keep warm premature babies, neonates and infants with a body weight of up to around 8 kg. The equipment includes a crash trolley with resuscitation devices. Operational characteristics 4. Microprocessor controlled equipment with automatic self-test. 5. At least one unit integrated monitor shelf which could support up to at least 20Kg. 6. Equipment composed by at least: an open-bassinet, heater unit and control unit. 7. Heater output indicator. 8. Maximum heater power output not less than 200 W. 9. Mobile equipment with at least n 4 castor wheels and at least n 2 brakes. 10. Bassinet with easy access at least from three sides. 11. Removable mattress made by a material flame retardant, washable, antibacterial and resistant to: corrosion, water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 12. Equipment compatibility with heated mattresses. 13. Bassinet size not less than 65 x 40 cm. 14. At least the following temperature control modes available: - automatic (at least baby Skin temperature); - manual; - pre-heating. 15. Temperature range in automatic (Baby skin temperature) mode not smaller than: from 35 C to 37 C with accuracy not higher than +/- 0.5 C. 16. Visual and audible alarms at least for: - skin temperature mode: High/Low skin temperature (not more than 1 C above/below the baby set temperature); - manual mode: patient check at least every 15 minutes; - power failure; - system or technical failure. Resuscitation devices included 17. Crash cart: crash trolley equipped for neonatal resuscitation: - cart/trolley for drugs and devices easy transportation, with at least four castor wheels and at least two brakes; - at least two distinct counters and two drawer; - steel structure and planes made up of washable, disinfectant resistant, anti-corrosion and antistatic material; ITB-HTOC (PPL) Page 11 of 12

12 - oxygen bottle of approximately 10 liters, 200 bars, portable and provided with at least the following accessories: flux meter, humidifier and oxygen tubes; - at least n 1 Guedeloro-pharingeal cannulas complete set with measures at least from 000 to 1; - set of Macintosh at least from n 0to n 1; - at least n 1 neonatal Magill forceps; - at least n 2 Tracheal tube series, each series at least with measures n 00, 0, 1, 2, single use, transparent type and with low pressure balloon; - at least n 5 neonatal oxygen masks Venturi type with connectors and with capabilities of providing FiO2 (Fraction Inspiration Oxygen) approximately of at least 24, 30, 35, 40, 50, 60%; - at least n 5 neonatal Oxygen-mask 100% type with reservoir; - at least n 5 neonatal Oxygen-mask 100% type without reservoir; - at least n 5 neonatal nasogastric tubes of different sizes; - stetho-phonendoscope neonatal size; - Pinard stethoscope. 18. Reusable Resuscitator: integrated handle resuscitator with self-inflating bag, used in pulmonary resuscitation of infants and children. - maximum volume delivered not less than 300 ml; - oxygen reservoir bag capacity not less than 1500 ml. 100 % latex-free; - transparent valve, transparent face mask. ITB-HTOC (PPL) Page 12 of 12