Operating instruction
|
|
- Joleen Candace Tucker
- 6 years ago
- Views:
Transcription
1 Operating instruction Radio Ref. no.: RAN RAN
2
3 Table of contents 1. Safety notes Device overview Operating elements Function Intended use Product features Operation Information for specialist electricians Installation and electrical connection Commissioning Technical data Guarantee Safety notes The installation and assembly of electrical devices may only be carried out by specialist electricians. If these instructions are not followed, the device may be damaged and fire or other dangers may arise. Before working on the device or disconnecting the load, take into account all the line circuit-breakers which supply hazardous voltage to the device or load. These operating instructions are part of the product and must remain with the end customer. 3
4 2. Device overview 1 2 fig. 1: Exploded diagram (1) Radio (2) Button set (3) Plastic screws (4) Frame (5) Retaining ring with PSU (6) Lever (7) Output for PSU The frame is integrated for the design ranges AS 500,A 500 and CD Operating elements The radio functions are controlled via the buttons. 4
5 Switching the radio on Short actuation switches the radio on/off Long actuation when the radio is switched on changes it to sleep mode Volume Volume control loud / quiet Memory Storing of the four preferred stations 3. Function 3.1. Intended use Installation in two flush-type boxes in accordance with DIN EN (recommendation: deep boxes) Preferred installation: vertical Order a separate button set for horizontal installation FM reception in the frequency range 87.5 MHz to 108 MHz 3.2. Product features Simple operation with additional status response LED blue LED lights up: operating display blue LED flashes: sleep mode active red LED: preferred station High-quality tone and great loudspeaker dynamics Optimised acoustics through the use of a bass reflex enclosure Integrated FM antenna High reception quality Automatic and manual station scan Non-volatile storage of 4 preferred stations (the stored stations are retained after voltage failure) Switch on with the last station and saved volume Sleep mode (switch off after approx. 30 minutes) Switching on/off possible via extension unit e.g. light Switching on/off possible via floating contact A/B e.g. time switch with floating contact 5
6 4. Operation Switching the radio on/off Press button briefly Device switches on/off The blue LED lights up/switches off The last selected station is retrieved at the last set volume. Sleep mode The radio is switched on. Press and hold button (approx. 3 seconds). The blue LED flashes. The radio is switched off after approx. 30 minutes. Automatic station scan Press and hold button (approx. 3 seconds) The long actuation is acknowledged by a tone. The entire frequency range is scanned and the four stations with the strongest signal are stored (automatic assignment of memory space). Memory is overwritten. Manual station scan Search for the station in descending/ascending frequency. Press button briefly The next station is selected. Save/overwrite preferred stations The required transmission frequency is selected. Press and hold down the required memory button - - or (approx. 3 seconds). The save is acknowledged by a tone. The transmission frequency is stored. If the memory location is already occupied, it is overwritten with the new transmission frequency. 6
7 Select preferred stations Press the memory button - - or briefly The associated red LED lights up The stored station is received Volume The button regulates the volume Press the + button louder Press the - button quieter 5. Information for specialist electricians L DANGER! Risk of an electric shock when touching live parts. Electric shock can lead to death. Before working on the device, isolate the connecting cables and cover any active components in the surrounding area Installation and electrical connection Connecting and installing the radio Installation in two flush-type boxes in accordance with DIN EN For LS Design ranges the installation into 2-gang and 3-gang surface caps is possible. The installation is either vertical or horizontal. For A, CD and FD ranges, lever (6) is in position A, while lever is in position B for LS ranges. Connection of the PSU according to wiring diagram (fig 2). Connection of the extension unit is optional. Connection A and B on the radio (fig 3) for connection to a floating contact (e.g. time switch with floating contact). Plug radio with frame onto PSU. Observe contacts of PSU. Connect radio to the supporting frame with enclosed plastic screws. Do not overtight the plastic screws. Clip on covers. The antenna is integrated. 7
8 A B 6 fig. 2: Connection power supply L,N Connection AC 230 V~ 1 Connection of extension unit A/B Floating contact L CAUTION! Do not connect any voltage to the floating contact A/B. BA fig. 3: Connection A and B for floating contact 8
9 6. Commissioning After the initial commissioning, an automatic station scan is carried out. The entire frequency range is scanned and stores the four stations with the strongest signal at memory locations 1 to 4. Appendix 7. Technical data Nominal voltage: AC 230 V ~ Frequency: 50/60 Hz Ambient temperature: approx C Humidity: approx. 15 % 90 % no moisture condensation Frequency range: MHz MHz Type of protection: IP 20 Connection: Screw terminals 2.5 mm² or 2 x 1.5 mm² 9
10 8. Guarantee Guarantee is provided within the framework of legal requirements. Please send the device postage paid with a description of the error to our central Customer Service department: ALBRECHT JUNG GMBH & CO. KG Service Center Kupferstr D Lünen Service line: Fax: mail.vki@jung.de Technical (general) Service line: Fax: mail.vkm@jung.de Technical (KNX) Service line: Fax: mail.vkm@jung.de The CE mark is a free trade sign addressed exclusively to the authorities and does not include any warranty of any properties. 10
11
12 Albrecht Jung GmbH & Co. KG Volmestraße 1 D Schalksmühle Service line: Fax mail.vki@jung.de Internet:
1 Safety instructions. 2 Device components. 3 Function. Radio Management Repeater. Operationsmanual
Art.-No.: 100 FR Operationsmanual 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage to the
More informationOperating Instructions. EnOcean radio wall transmitter
Operating Instructions 1. Safety instructions Electrical devices may only be installed and fitted by electrically skilled persons. Non-compliance with the instructions could cause damage to the device,
More informationOperating instructions Flat-Type Wall-Mounted Radio Control
Operating instructions Flat-Type Wall-Mounted Radio Control Insert 1. Function The wall-mounted radio control insert permits remote control of all receivers of the Funk-Management system. This wall-mounted
More informationElectrical devices may only be mounted and connected by electrically skilled persons.
enet Server Order No. : 5301 00 Power adapter enet Server 12 V DC Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious
More informationElectrical devices may only be mounted and connected by electrically skilled persons.
Order No. : 2126 00 Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible.
More informationRadio Touch Order no.: 2880 xx. Operation and installation instructions. 1 Safety instructions. 2 Structure of the device (Figure 1) Radio Touch
Radio Touch Order no.: 2880 xx Operation and installation instructions 1 Safety instructions Electrical equipment must only be installed and assembled by a qualified electrician in accordance with the
More information1 Safety instructions. 2 Device components. Radio bus system. Radio socket outlet adapter for dimming Order No. : Operating instructions
Order No. : 1185.. Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Serious injuries, fire or property damage possible.
More informationOperating Instructions. Combination sensor
Operating Instructions 1. Safety warnings Attention: Electrical equipment must be installed and fitted by qualified electricians only and in strict observance of the relevant accident prevention regulations.
More informationElectrical devices may only be mounted and connected by electrically skilled persons.
Art. No. : FM..1561.07.. Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible.
More information1 Safety instructions. 2 Device components. 3 Function. Radio bus system. Radio socket-outlet adapter for switching Order No. :
Order No. : 0401.. Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Serious injuries, fire or property damage possible.
More informationOperating Instructions Wind Sensor with Heating Heating Transformer Rain Sensor
Operating Instructions Wind Sensor with Heating Heating Transformer Rain Sensor 2 1. Safety instructions Attention: Electrical equipment must be installed and fitted by qualified electricians only. 2.
More informationRadio bus system Radio-universal dimming actuator, 1-gang. 1 Safety instructions. 2 Device components. Order-No. : Operating instructions
Order-No. : 1135 00 Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage
More informationWireless wall transmitter, 1-gang with inscription space, Wireless wall transmitter, 3-gang with inscription space
Wireless wall transmitter, 1-gang with inscription space Order No. : 5331.. Wireless wall Order No. : 5333.. Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected
More informationElectrical devices may only be mounted and connected by electrically skilled persons.
Order No. : 5490.. Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible.
More information1 Safety instructions. 2 Device components. 3 Function. KNX Heating actuator 6gang RMD 230 V. Order-No. :
Order-No. : 7531 60 03 Operation- and Assembly Instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions
More informationProduct documentation
Product documentation Area/line coupler ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle Telefon: +49.23 55.8 06-0 Telefax: +49.23 55.8 06-2 04 kundencenter@jung.de www.jung.de Service Center
More informationInstabus Radio Control Converter Installation Instructions
Order no.: 0868 00 System rmation This device is a product of the Instabus EIB system and complies with EIBA directives. Detailed technical knowledge obtained in Instabus training courses is a prerequisite
More informationUniversal Radio Cord Dimmer Order No.: Function
Order o.: 0335 0 a) b) Function The permits radio-operated control of lighting fixtures. The device permits switching (short actuation) or dimming (long actuation) of the lighting. The dimmer is operated
More informationOperating Instructions. Instabus Audio Actuator, 4-gang
Operating Instructions Instabus Audio Actuator, 4-gang 531 System information This device is a product of the Instabus EIB system and complies with the EIBA guidelines. Detailed specialist knowledge gained
More informationSUNNY BEAM REPEATER Transmission Range Increase for Sunny Beam
SUNNY BEAM REPEATER Transmission Range Increase for Sunny Beam User Manual SBeamRep-BEN091911 98-0002611 Version 1.1 EN SMA Solar Technology AG Table of Contents Table of Contents 1 Notes on this Manual..............................
More informationE-400 endstufe. user manual
E-400 endstufe user manual Musikhaus Thomann e.k. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0)9546 9223-66 email: info@thomann.de Internet: www.thomann.de 02.12.2011 Table of contents Table
More informationSIMATIC Ident RFID systems ANT 3 Compact Operating Instructions
SIMATIC Ident RFID systems Compact Operating Instructions Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to
More informationRadio motion detector comfort 1.1 m/2.2 m quicklink Order number
Radio motion detector comfort 1.1 m/2.2 m quicklink Order number 8534 51.. Operating instructions 1. Safety instructions Electrical equipment may only be installed and assembled by a qualified electrician
More informationKNX radio wall-transmitter 1gang/2gang flat quicklink Order no.: 8565 x2 xx
KNX radio wall-transmitter 1gang/2gang flat quicklink KNX radio wall-transmitter 1gang/2gang flat quicklink Order no.: 8565 x2 xx KNX radio wall-transmitter 1gang/2gang flat solar quicklink Order no.:
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LH24A-00 Communicative linear actuator adjusting dampers and slide valves in technical building installations Air damper size up to approx. m² Actuating force 50 N Nominal voltage AC/DC
More informationWireless Room Thermostat Installation and Operation Y6630D1007
Wireless Room Thermostat Installation and Operation Y6630D1007 General safety instructions Contents 1. General safety instructions... 3 1.1. Commissioning the relay module HC60NG... 3 2. Overview... 4
More informationRadio receiver E17 2-channel, 27 MHz, 40MHz, or 433 MHz, 2 relay outputs. Operating voltage: 230 V/AC or 12 V or 24 V AC/DC available.
Fig.: 230 V version Radio receiver E17 2-channel, 27 MHz, 40MHz, or 433 MHz, 2 relay outputs. Operating voltage: 230 V/AC or 12 V or 24 V AC/DC available. Installation, connection and programming instructions
More informationDT1100 xx xx xx PS. Isolators, Isolator / Power Supplies. Operating Instructions
Isolators, Isolator / Power Supplies Operating Instructions EN Contents 1. About this document...4 1.1. Function... 4 1.2. Target group... 4 1.3. Symbolism used... 4 2. For your safety...5 2.1. Authorized
More informationTechnical data. Safety notes. T3-LR24A-SR en v Subject to changes 1 / 2
echnical data sheet LR4A-SR Modulating rotary actuator for and -way control ball valves orque Nm Nominal voltage AC/DC 4 V Control: Modulating DC... V Position feedback: DC... V echnical data Safety notes
More informationPower supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
More informationInstruction manual ADN-W AM. Antenna Module
Instruction manual ADN-W AM Antenna Module For your safety www www.sennheiser.com Manual Contents For your safety... 1 The ADN-W AM antenna module... 1 Package contents... 2 Components required for wireless
More informationPower supply CP-D 12/2.1
2CDC 271 025 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 12 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 2.1 A Rated output power
More informationPower supply CP-D 24/1.3
2CDC 271 027 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 24 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 1.3 A Rated output power
More informationOverview of types. Technical data
echnical data sheet SHA-.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control dampers
More informationDMP40. User Manual.
DMP40 User Manual www.audac.eu ADDITIONAL INFORMATION This manual is put together with much care, and is as complete as could be on the publication date. However, updates on the specifications, functionality
More informationIMPORTANT SAFETY INSTRUCTIONS
WR-2 GB Version 1 IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water.
More information1. Function. Universal dimming actuator REG-K/2x230/ 300 W. Universal dimming actuator REG-K/230/ 500 W. Universal dimming actuator REG-K/230/ 1000 W
L L N N on error RUN 1 2 3 4 KNX EIB 1 1 1 1 Chapter 9: Dimming actuators/control units Chapter 9:Dimming actuators/control unitsart. no.6493xxas of 10/079.2Universal dimming actuators Universal dimming
More informationCircuit Breaker Finder
ECB50-FGIS Circuit Breaker Finder and AC Line Tracer User Manual ECB50-FGIS Circuit Breaker Finder and AC Cable Tracer Contents Safety Information...3 Symbols Used in this Manual...3 Introduction...4 Finding
More informationActive Transmitter Combiner 8:1 AC 3200-II. Instruction manual
Active Transmitter Combiner 8:1 AC 3200-II Instruction manual Contents Contents Important safety instructions... 2 The AC 3200-II active transmitter combiner 8:1... 4 Delivery includes... 4 Connection
More informationPRODUCT MANUAL. ABB i-bus KNX VC/S 4.x.1 Valve Drive Controller
PRODUCT MANUAL ABB i-bus KNX VC/S 4.x.1 Valve Drive Controller Contents Contents Page 1 General... 5 1.1 Using the product manual...5 1.2 Legal disclaimer...5 1.3 Explanation of symbols...5 2 Safety...
More informationAir Quality Sensor KNX AQS
Air Quality Sensor KNX AQS Installation and Adjustment 1 Content 1. Description... 3 1.0.1. Measurement of carbon dioxide in the air... 3 1.1. Technical specifications... 4 2. Installation and commissioning...
More informationKNX TH65-AP. Thermo-Hygrometer. Installation and Adjustment. Item number 70184
EN KNX TH65-AP Thermo-Hygrometer Item number 70184 Installation and Adjustment 1 Content 1. Description... 3 1.1. Technical specifications... 3 2. Installation and commissioning... 4 2.1. Installation
More informationDT1100 E xx xx (PS) Galvanic Isolators. Operating Instructions
DT1100 E xx xx (PS) Galvanic Isolators Operating Instructions Contents 1. About this document...4 1.1. Function... 4 1.2. Target group... 4 1.3. Symbolism used... 4 2. For your safety...5 2.1. Authorized
More informationE-800 power amplifier. user manual
E-800 power amplifier user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 20.05.2016,
More informationLight Management Systems for Indoor Use MULTISENSORS
Light Management Systems for Indoor Use MULTISENSORS MULTISENSORS Daylight and motion sensors both enable greater energy savings to be made and increase the convenience factor. For this reason, we have
More information5.5 SLG 75. Read/Write Devices Read/Write Antennas
5.5 SLG 75 Application area SLG 75 The SLG 75 ANT is a read/write device in the middle of the performance range. It can only be used with ANT 1, ANT 12, ANT 18 and ANT 30. The antennas can be very easily
More informationgesis EIB V Manual Installation system for European Installation Bus Products and Objects description
gesis EIB V Installation system for European Installation Bus Manual Products and Objects description Doc. No. BA000231 Revision D (10/2010) 2010 Wieland Electric GmbH Contents Contents 1 About This Manual...
More informationWireless multizone receiver RDE-MZ6
s 1 428 Wireless multizone receiver RDE-MZ6 for floor heating / zone heating systems Mains-powered RDE-MZ6 multizone wireless receiver (AC 230 V) DIN rail mounting 2-position control with On/Off output
More informationE-400 power amplifier. user manual
E-400 power amplifier user manual Musikhaus Thomann e.k. Treppendorf 30 96138 Burgebrach Germany Telephone: (09546) 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 07.03.2014, ID: 173888 Table
More informationthanos SR Multifunction Room Operating Unit Data Sheet Application Functions
thanos SR Multifunction Room Operating Unit Data Sheet Subject to technical alteration Issue date: 05.06.2014 Application The touch room operating panel thanos is designed for temperature and humidity
More informationOperating instructions. Radio weather station
Operating instructions Radio weather station 0334.. Notes regarding the battery Batteries and button cells do not belong in the hands of children. Contact a doctor immediately if a button cell has been
More informationQUINT-PS-24DC/24DC/10
QUINT-PS-24/24/10 QUINT - converter, primary switched mode, input: 24 V, output: 24 V /10 A INTERFACE Data Sheet PHOENIX CONTACT - 02/2006 Description The QUINT - converter 24 V/10 A converts the voltage
More informationTechnical Information itemp TMT180
TI00088R/09/EN/14.16 71315611 Technical Information itemp TMT180 Temperature head transmitter for resistance thermometers Pt100 Configurable using a PC, for installation in a terminal head, form B Application
More informationRAD-IN/OUT-8D. Digital extension modules for the bidirectional wireless system. INTERFACE Data sheet _en_05. 1 Description
RAD-IN/OUT-D Digital extension modules for the bidirectional wireless system INTERFACE Data sheet 102122_en_0 PHOENIX CONTACT 2010-02-2 1 Description The RAD-ISM-...-SET-BD-BUS-ANT bidirectional wireless
More informationProduct and Applications Description
Product and pplications Description Diagram The transmitter 230V wave UP 110 (Diagram ) is a flushmounted device with radio communication for the wireless operation of room functions. It is possible to
More informationB-Tronic EasyControl EC5401B
B-Tronic EasyControl EC5401B en Assembly and Operating Instructions Wall/hand-held transmitter, 1-channel, bidirectional Important information for: Fitters / Electricians / Users Please forward accordingly!
More informationFor detailed specifications and ordering info go to
For detailed specifications and ordering info go to www.testequipmentdepot.com ECB50A, ECB50A-E, ECB50A-FGIS Circuit Breaker Finder and AC Cable Tracer User Manual For detailed specifications and ordering
More informationAntenna Splitter ASA 1. Instruction manual
Antenna Splitter ASA 1 Instruction manual Contents Contents Important safety instructions... 2 The ASA 1 active antenna splitter... 4 Combination possibilities of ASA 1/ASA 1-1G8... 5 Delivery includes...
More informationE-800 power amplifier. user manual
E-800 power amplifier user manual Musikhaus Thomann e.k. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 03.06.2013 Table of contents
More informationElectrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V. Power consumption In operation At rest For wire sizing
echnical data sheet Rotary actuator LR4A Rotary actuator for and -way (control) ball valves orque 5 Nm Nominal voltage AC/DC 4 V Control: Open/close or -point echnical data Electrical data Nominal voltage
More informationLED Driver Linear / area fixed output
Driver LC 5W 5/3/35mA fixc lp SNC essence series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 5, 3 and35 ma Max. output power 5 W Up to 91 % efficiency
More informationPower consumption In operation At rest For wire sizing. 1.5 W at nominal torque 0.4 W 4 VA Connection Cable 1 m, 3 x 0.75 mm 2
echnical data sheet Rotary actuator LRA Rotary actuator for and -way (control) ball valves orque 5 Nm Nominal voltage AC... 4 V Control: Open/close or -point echnical data Electrical data Nominal voltage
More informationElectronic Circuit Breaker with reset input ESS20-1..
Electronic Circuit Breaker with reset input ESS0-.. Description The special device ESS0-.. is a further extension of the product line electronic circuit breakers. Type ESS0-.. has a width of only. mm and
More informationIndustrial motor controller for brushed DC motors 24 VDC
Industrial motor controller for brushed DC motors 24 VDC Design for output currents up to 5 A Control with the following functions: - reversal of direction of rotation - open-loop speed control (external)
More informationMINI-PS AC/24DC/1.3
Power supply unit INTERFACE Data sheet 102894_en_03 1 Description PHOENIX CONTACT 2015-11-17 Features MINI POWER power supplies for MCR technology In measurement and control technology (MCR), modular electronics
More informationTC ANT MOBILE... Mobile communication antennas and antenna cables. Data sheet _en_00. 1 Description
Mobile communication antennas and antenna cables Data sheet 106760_en_00 PHOENIX CONTACT 2015-08-11 1 Description This data sheet describes the accessories for mobile communication products. All mobile
More informationORIGINAL INSTRUCTIONS
FACTORY AUTOMATION ORIGINAL INSTRUCTIONS Safety light grid SLP series The latest version of the General Terms of Supply for Products and Services in the Electronics Industry issued by the German Electrical
More informationFieldbus Isolating Repeater Series 9185/11
www.stahl.de > For operation of the intrinsically safe Profibus DP (RS-485 IS to PNO standard) > Intrinsically safe fieldbus RS-422, RS-485 [Ex ib] IIC > Galvanic isolation between RS-422 / RS-485, RS-232,
More informationPower consumption In operation At rest For wire sizing. Auxiliary switch NRF24A-SR-S2 NRF24A-SR-S2-O
echnical data sheet NRF24A-SR-S2(-O) Modulating rotary actuator with emergency function for 2- and 3-way ball valves orque or ue 10 Nm Nominal voltage AC/DC 24 V Control: modulating DC 0... 10 V Position
More informationRadio receiver. Instructions for Use. for the reception of a flush actuation via radio signal. en_int
Radio receiver Instructions for Use for the reception of a flush actuation via radio signal Model 8350.35 en_int Year built: from 06/2012 Radio receiver 2 from 10 Table of contents Table of contents 1
More informationThe universal input/output device is a DIN rail mounted device. It is connected to the EIB via a bus connecting terminal.
, GH Q631 0026 R0111 SK 0097 B97 The universal input/output device is a DIN rail mounted device. It is connected to the EIB via a bus connecting terminal. The device has 32 freely programmable inputs/outputs,
More informationPower supply CP-T 48/20.0 Primary switch mode power supply
Data sheet Power supply CP-T 48/20.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationMV110-8AS. Analog input module 8 channel. User guide
MV110-8AS Analog input module 8 channel User guide MV110-8AS_2016.12_0226_EN All rights reserved Subject to technical changes and misprints Contents 1 Description... 2 1.1 Function... 2 1.2 RS485 network...
More informationQUINT-PS AC/24DC/40
Power supply unit INTERFACE Data sheet 102315_en_02 1 Description PHOENIX CONTACT 2010-04-23 Features QUINT POWER power supply units for plant and special engineering reliably start heavy loads with high
More informationPHOENIX CONTACT - 09/2009
Electronic miniature circuit-breaker CLIPLINE Data sheet 03906_en_0 PHOENIX CONTACT - 09/2009 Description The EC-E... electronic miniature circuit-breaker selectively protects all 24 V DC load circuits
More informationADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W
ADC5000 SERIES AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications 60W, 125W and 250 W Input voltage 230/115 VAC voltages 12, 24, 36 or 48 VDC Statistical MTBF >3 000
More informationMounting instruction and operating manual. Access Point (UK) HmIP-HAP-UK
Mounting instruction and operating manual Access Point (UK) HmIP-HAP-UK Package contents Quantity Description 1 Homematic IP Access Point (UK) 1 Plug-in mains adapter 1 Network cable 2 Screws 2 Plugs 1
More informationUSi Product Presentation. Mayser Ultrasonic Industrial Sensor USi
USi Product Presentation Mayser Ultrasonic Industrial Sensor USi Page 1 Contents Ultrasonic Technology - General technology - Mayser Ultrasonic Technology Ultrasonic Industrial Sensor - Intended use -
More informationKNX PY. Global Irradiance Sensor. Installation and Adjustment
EN KNX PY Global Irradiance Sensor Installation and Adjustment 1 Content 1. Description... 3 1.1. Scope of delivery... 3 1.2. Technical specifications... 3 2. Installation and commissioning... 4 2.1. Notes
More informationPower supply CP-T 48/5.0 Primary switch mode power supply
Data sheet Power supply CP-T 48/5.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationDigital electronic module 4DO DC24V/2A HF (6ES7132-4BD30-0AB0) SIMATIC
Digital electronic module 4DO DC24V/2A HF (6ES7132-4BD30-0AB0) SIMATIC Properties 1 Parameters 2 Diagnostics 3 ET 200S distributed I/O Digital electronic module 4DO DC24V/2A HF (6ES7132-4BD30-0AB0) Manual
More informationFISCHER AMPS MANUAL. In Ear Amp 2
FISCHER AMPS MANUAL [Art.No. 001120/2] In Ear Amp 2 Dear customer: You have decided to buy a Fischer Amps product. Thank you. Please read this manual carefully prior to the first use, you will get important
More informationWAGO Application: Plastic Technology Center (SKZ) in Würzburg, Germany
522 WAGO Application: Plastic Technology Center (SKZ) in Würzburg, Germany WAGO Products: WAGO-I/O-SYSTEM with ETHERNET Controllers, DALI and EnOcean Components Wireless Technologie System Overview 524
More informationPower supply CP-T 24/20.0 Primary switch mode power supply
Data sheet Power supply CP-T 24/20.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationThe frequency inverter continues to carry hazardous voltages for up to 5 minutes after it was switched off.
Getriebebau NORD GmbH & Co. KG Getriebebau-Nord-Straße 1 22941 Bargteheide, Germany www.nord.com o SK BRI4-1-200-100 Part number: 275 272 008 Internal braking resistor for connection to a NORDAC FLEX SK
More informationInputs/Outputs dimmer outputs 700W 2 inputs 0-10V or 1-10V for emergency operation or standalone operation
Technical specifications / user manual Universal dimmer General The universal dimmer is suited for usage with high voltage lamps, magnetic transformers, electric transformers, ESL and LED retrofit lamps.
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LR24A-KNX Communicative rotary actuator for ball valves Nominal torque 5 Nm Nominal voltage AC/DC 24 V Control modulating Conversion of sensor signals Communication via KNX (S-Mode)
More informationV00029KX READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID
READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID Net-Verse D-Type Cabinets Tool List 10mm Socket Wrench 122mm (48 ) Level 19mm Wrench 8mm Hex Drive T25 Torx driver Net-Verse D-Type
More informationRAIL MOUNTED NETWORK METER TYPE N27D USER S MANUAL
RAIL MOUNTED NETWORK METER TYPE N27D USER S MANUAL 1 Contents 1. Application... 5 2. meter set... 6 3. BASIC REQUIREMENTS, OPERATIONAL SAFETy... 6 4. installation... 10 4.1. Mounting... 10 4.2. External
More informationmix 502, mix 802, mix 1202FX mixer user manual
mix 502, mix 802, mix 1202FX mixer user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de
More informationPR200DAB DAB+/AM/FM RADIO USER MANUAL IMPORTANT! WARRANTY INFORMATION INSIDE. PLEASE READ. Trademark of TEAC Corporation JAPAN
PR200DAB DAB+/AM/FM RADIO USER MANUAL IMPORTANT! WARRANTY INFORMATION INSIDE. PLEASE READ Trademark of TEAC Corporation JAPAN www.teac.com.au WARRANTY PROCEDURE v1.7b: July 2016 for 12M Replacement Please
More informationUR200SI / UR200WE ENGLISH
ENGLISH Hersteller Wörlein GmbH Tel.: +49 9103/71670 Gewerbestrasse 12 Fax.: +49 9103/716712 D 90556 Cadolzburg Email. info@woerlein.com GERMANY Web: www.woerlein.com UR200SI / UR200WE ENVIRONMENTAL PROTECTION
More informationdata sheet MS-HM.01 AUDIO SYSTEM FOR INTEGRATION INTO MEDIA BOARDS
data sheet Media-series MS-HM.01 AUDIO SYSTEM FOR INTEGRATION INTO MEDIA BOARDS en Media-Series contents introduction 3 the product product description 5 Technical Documentation Tender Specification Technical
More informationD3400 digital power amplifier. user manual
D3400 digital power amplifier user manual Musikhaus Thomann e.k. Treppendorf 30 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 email: info@thomann.de Internet: www.thomann.de 18.11.2011 Table
More informationThyristor power controller B DI1002 V1.0 Manual/Operating instructions
1 B DI1002 V1.0 Manual/Operating instructions 2 1 Introduction Before you put the thyristor controller into operation, please read these operating instructions. Keep them in safe place accessible for all
More informationmobile sound booster and infrared TV listening system Set 900 Instruction manual
mobile sound booster and infrared TV listening system Set 900 Instruction manual I 1 2 6 7 3 4 5 5 8 II E D 9 C B A 0 F G H I Contents Contents Safety instructions... 2 Delivery includes... 4 Product
More informationMU110-16R(K) Digital output module 16 channel. User guide
MU110-16R(K) Digital output module 16 channel User guide MU110-16R(K)_2016.12_0220_EN All rights reserved Subject to technical changes and misprints akytec GmbH Vahrenwalder Str. 269 A 30179 Hannover Germany
More informationABB i-bus EIB / KNX Analogue Input AE/S 4.2
Product Manual ABB i-bus EIB / KNX Analogue Input AE/S 4.2 Intelligent Installation Systems This manual describes the functionality of Analogue Input AE/S 4.2. Subject to changes and errors excepted. Exclusion
More informationRadioStar INTRODUCTION
CONTENTS INTRODUCTION...2 PACK CONTENTS...2 SAFETY INSTRUCTIONS...3 DEFINITION OF SYMBOLS...4 RECOMMENDED TOOLS...4 ASSEMBLY INSTRUCTIONS...5 RADIOSTAR MIRROR FUNCTIONS...7 SIDE INTEGRATED CONTROL PANEL...8
More informationUser Manual March 2008
User Manual March 008 Motor Silent Gliss 900, 90, 90, 903 Motor Silent Gliss 9030, 903, 903, 9033 Usermanual Motors 90x_903x Page Copyright April 007 by Silent Gliss International Ltd., 3073 Gümligen/Berne
More information