PR200DAB DAB+/AM/FM RADIO USER MANUAL IMPORTANT! WARRANTY INFORMATION INSIDE. PLEASE READ. Trademark of TEAC Corporation JAPAN

Size: px

Start display at page:

Download "PR200DAB DAB+/AM/FM RADIO USER MANUAL IMPORTANT! WARRANTY INFORMATION INSIDE. PLEASE READ. Trademark of TEAC Corporation JAPAN"

Claud Fox
5 years ago
Views:

1 PR200DAB DAB+/AM/FM RADIO USER MANUAL IMPORTANT! WARRANTY INFORMATION INSIDE. PLEASE READ Trademark of TEAC Corporation JAPAN

2 WARRANTY PROCEDURE v1.7b: July 2016 for 12M Replacement Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures. 1. Please read this warranty card. 2. Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service. 3. If you require Warranty Service, please contact the TEAC Warranty Service Hotline at for assistance. Please ensure that you have the model number, serial number and purchase receipt ready when you call. Please complete the section below and keep this information for your own records. Owner s Name Owner s Address Postcode Model Name/No. Serial No. Dealer s Name Dealer s Address Postcode Thank you for selecting a TEAC product If your TEAC product malfunctions, please call us directly for warranty support between Monday to Friday at 8.30AM 5PM AEST at the TEAC Warranty Service Hotline For other enquiries, please contact us at: When calling to receive warranty service, please have: 1. Your model and serial number 2. Proof of purchase 3. And your product in front of you NOTE: - You are required to provide a copy of your proof of purchase in order to have your claim processed. - Please read the Terms and Conditions for details of your warranty entitlement. 2

3 TERMS AND CONDITIONS v1.7b: July 2016 for 12M Replacement Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 1. TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill. Maintenance and cleaning (i.e. laser head) is not covered by this warranty. The TEAC warranty only applies to TEAC products purchased NEW from a TEAC Authorised Retailer in Australia. This warranty only applies to the original purchaser and cannot be transferred. 2. The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates, being the Australian Consumer Law. 3. Refund or replacement via your TEAC Authorised Retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure. Refund and exchange is not applicable for change of mind. 4. Subject to the terms herein, this warranty effectively covers TEAC products under the 12 Month Replacement Warranty Scheme, 12 months from the date of original purchase. 5. The warranty is void and warranty claims may be refused, subject to the Australian Consumer Law, if: a) The product was not transported, installed, operated or maintained according to manufacturer instruction, or b) The product was abused, damaged, tampered, altered or repaired by any unauthorised persons, or c) Product failure is due to accidents during use, installation or transit, power surges, use of defective or incompatible external devices, exposure to abnormal conditions such as excessive temperatures or humidity, or entry of liquids, objects or creatures into the product, cockroach infestations, or d) The customer is unable to provide proof of purchase of the product for verification, or e) The serial number of the product is missing or has been tampered with. 6. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of any equipment other than as stated in this warranty and outlined above. 7. TEAC and/or its Authorised Service Centres reserve the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers/retailers. 3

4 Safety Instructions Please read these instructions carefully and retain for future reference. WARNINGS To prevent fire or shock hazards, do not expose this appliance to water or high heat. If the unit gets wet, DO NOT turn it on. Keep the unit away from damp or humid conditions. Do not place containers filled with liquid on the unit or near the unit. Keep the unit away from naked flame sources such as candles. Air vents built into the unit are for expelling hot air do not cover or block these vents. Be mindful of the power cable and other connected cables place them so they do not get pinched, walked on or damaged. Do not insert foreign objects into the unit. How To Clean Clean the unit with a clean dry cloth. Do not use liquid or aerosol cleaners. Support and Service Do not attempt to service this unit yourself. Please refer only to qualified service technicians. For help and support with the installation/operation of the product, contact TEAC Australia at What s in the Box 1. Portable DAB+/AM/FM Radio unit 2. Power cable 3. User manual Setting Up and Switching On This radio should be placed away from heat and moisture, on a stable surface with good air ventilation. Connect the power cable to the radio unit, then plug the other end of the power cable to a wall power outlet. To switch the radio on, push the VOLUME dial to the right. You will hear a click. The radio is now turned on. Extend and adjust the antenna to receive radio channels. You may need to move the radio to get the best reception. 4

5 Controls and Outputs FRONT AND BACK No. Part name Function 1 Carry handle For portability 2 Control panel Operate your radio with the buttons and dials on this panel 3 Tuning dial and pointer Turn this dial to tune in to radio stations in FM and AM Radio Modes 4 Headphone socket Connect earphones or headphones for private listening. (3.5mm) This will also turn off the speaker sound. 5 Aux in socket (3.5mm) Connect a media player such as your phone to play audio through this unit 6 Speaker Outputs audio 7 Radio antenna Extend this antenna and swivel it around to find the best radio reception 8 Power socket Connect the power cord to power up the radio unit. 5

6 Controls and Outputs CONTROL PANEL No. Button/Part Function 9 AUTO Press to start scanning for a list of DAB radio stations 10 MENU Press to enter the menu corresponding to the current Mode 11 DISPLAY Press to display information on the current DAB+ station. (Only used in DAB+ Mode) 12 SHIFT (for presets 6 to 10) Press to access presets 6-10 (e.g. for preset 6, press SHIFT and then PRESET 1/6) 13 SELECT Press to confirm settings or station selections 14 / (LEFT/RIGHT) Press to scroll through available stations or menu choices 15 LCD Display Displays station information and menu items. All information here are received from the broadcaster. (Only used in DAB+ Mode) 16 AM Press to select AM radio mode 17 AUX Press to select AUX mode 18 FM Press to select FM radio mode 19 DAB Press the DAB+ Button to select DAB radio mode. 20 Preset 1 & 6 21 Preset 2 & 7 22 Preset 3 & 8 23 Preset 4 & 9 24 Preset 5 & 10 Press to go to the preset stations 1-5. For preset stations 6/10, press SHIFT first. To save a station to a preset, tune in to the desired station first - then press and hold any of the preset buttons 1-10 to save the station to that preset number. 25 TONE Adjust the Treble/Bass balance 26 On/Off & Volume Control When the unit is off, turn this dial to the right to switch the unit on - there will be a click. Turn to the right to increase the volume. Turn to the left to decrease the volume. To turn off the unit, turn the dial all the way to the left until there is a click. 6

7 HOW TO USE: DAB+ Mode Switch to DAB+ Mode by pressing the DAB button. After switching to DAB+ for the first time, the radio will scan for channels automatically. This may take a few minutes. The first station in the list will play after the scan is completed. Changing Stations Press the LEFT/RIGHT / buttons to scroll through the list of channels. Press SELECT to switch to the displayed channel. Auto-Scanning Stations For best results, scan for new DAB+ channels occasionally so that you have an up to date list of channels stored on your radio. To do this, press the AUTO button and the scanning will start. Some station names may have these symbols beside them:? - This will indicate that the station is not active or available/no reception >> - This symbol indicates that the station is a primary station with secondary services << - This symbol indicates that the station is secondary station To tune manually, use the DAB+ Menu in DAB+ Mode. Using and Saving Presets With preset stations, you can switch to your favourite stations with a single button press. This radio unit has 10 presets available. To access presets 1-5, just press the desired preset button once. To access presets 6-10, press SHIFT before pressing the preset number button. Save stations as preset stations with the following steps: 1. Tune in to the desired station 2. Press and hold a preset button. (To save to presets 6-10, first press SHIFT) 3. The station is saved when the display reads Preset (number) saved. If there is a station already set to a preset station, saving a new preset to the same preset station will overwrite the old preset station. DAB+ Menu Press the MENU button to access the menu options and scroll through them with the LEFT/RIGHT / buttons. Press SELECT to choose the menu option on display. You can use the DAB+ Menu as follows: 7

8 CHANGE STATION ORDER 1. Press MENU to access the menu options 2. Press the LEFT/RIGHT / buttons until Station Order is displayed. 3. Press SELECT to enter Station Order. 4. Use the LEFT/RIGHT / buttons to display the desired option. 5. Press SELECT to confirm. MANUAL TUNING 1. Press MENU to access the menu options 2. Press the LEFT/RIGHT / buttons until Manual Tune is displayed. 3. Press SELECT to enter Manual Tune. 4. Use the LEFT/RIGHT / buttons to go to the desired frequency. 5. Press SELECT to confirm and the radio will show a reception strength bar. 6. Press SELECT to confirm and the radio will show a reception strength bar. CHECK SW VERSION 1. Press MENU to access the menu options 2. Press the LEFT/RIGHT / buttons until SW Version is displayed. 3. The software version is now displayed on the LED display. PRUNE LIST OF CHANNELS 1. Press MENU to access the menu options 2. Press the LEFT/RIGHT / buttons until Prune is displayed. 3. Press SELECT to enter Prune. 4. Use the LEFT/RIGHT / buttons to choose between YES/NO. 5. Press SELECT to confirm. ADJUST DRC VALUE 1. Press MENU to access the menu options 2. Press the LEFT/RIGHT / buttons until DRC is displayed. 3. Press SELECT to enter Station Order. 4. Use the LEFT/RIGHT / buttons to display the desired option. 5. Press SELECT to confirm. DRC is dynamic range compression, and it is about increasing the loudness of the quieter parts of the audio signal, and decreasing the loudness of the louder parts. Some broadcasters provide this option to you. DRC 1: Max compression giving a narrower range of loudness, DRC 1/2: medium compression DRC 0: No compression applied (all loud and quiet parts intact) DAB+ Station Information Press the DISPLAY button repeatedly to toggle various information about the DAB+ radio channel to be shown on the LED display. 8

9 Dynamic Label Segment (DLS): the scrolling text information supplied by the station Program Type (PTY): describes the type of program provided by the station Multiplex Name: shows the multiplex that is broadcasting the program Time and Date: displays the time and date, provided by the broadcaster Channel and Frequency: the transmission frequency of the station Signal Information: shows the digital bit rate and the signal mode Signal Strength: shows a signal bar with the strength of the current station. There is a mark on the bar that indicates the minimum acceptable signal strength. HOW TO USE: AM and FM Mode Switch to AM or FM Mode by pressing the AM or FM button. Tuning FM/AM Radio Channels Turn the tuning dial on the front of the radio left or right until the pointer points to the desired frequency shown on the dial. The tuning dial stops when the pointer is horizontal. Do not force the dial to turn beyond the stopping points as you may cause damage to the tuner parts. HOW TO USE: Aux In Switch to Aux Mode by pressing the AUX button. You can play audio from compatible media players such as your smartphone or an MP3 player by connecting them to this radio, using a matching stereo cable. The Aux socket provided on this radio is 3.5mm. HOW TO USE: Volume and Tone Adjusting the volume Use the VOLUME wheel on the top of the radio. Increase volume: turn the wheel to the right Decrease volume: turn the wheel to the left Adjusting the tone Use the TONE wheel on the top of the radio. Enhance treble frequency: turn the wheel to the right 9

10 Enhance bass frequency: turn the wheel to the left Replacing the Batteries This radio uses 6x C size batteries. 10

11 Troubleshooting If a fault occurs, first check the list below before taking the radio for repair. If you cannot solve a problem, please contact TEAC at WARNING: DO NOT try to repair the unit yourself, as this will void the warranty. PROBLEM POSSIBLE CAUSE SOLUTION No Sound Headphones may be connected. Disconnect your Headphones from the The Volume might be set to low. unit. Adjust the volume level of the radio. The power cord may not be Reconnect the power cord firmly connected correctly/firmly The buttons on the unit are not responding Electrostatic discharge or interference Turn the unit off and disconnect the from other electrical equipment Power Cord. Wait for 5-10 seconds, reconnect and turn the unit back on Poor radio reception There is a weak aerial signal or Reposition the aerial and the unit for there may be interference from other the best possible reception. Ensure the electrical equipment aerial is connected. Keep the unit away from other electrical equipment where possible. No DAB signal/reception. You may not have DAB in your area Rotate antenna and rescan channels. DAB reception cuts in and out Move the radio to a position with better reception. Visit to find out if you have DAB in your area Specifications Radio Type Frequency Range Battery Operation Power Supply Max Power Consumption Unit dimensions Unit weight DAB+ / FM / AM Digital Radio DAB Band III, MHz FM MHz AM KHz 6 x 1.5v C Size batteries (not included) AC Power Input: V, 50Hz 11W *Dimensions and weight are approximate *Specifications are subject to change without notice 11

12 In the event of a product failure within the warranty period, please call the TEAC Warranty Service Hotline Between Monday to Friday AM to 5PM AEST *Please have your purchase receipt and the product s serial number ready For other enquiries and support please visit

DAB450. DAB+/FM digital radio USER MANUAL IMPORTANT! WARRANTY INFORMATION INSIDE. PLEASE READ. Trademark of TEAC Corporation JAPAN

DAB450. DAB+/FM digital radio USER MANUAL IMPORTANT! WARRANTY INFORMATION INSIDE. PLEASE READ. Trademark of TEAC Corporation JAPAN DAB450 DAB+/FM digital radio USER MANUAL IMPORTANT! WARRANTY INFORMATION INSIDE. PLEASE READ Trademark of TEAC Corporation JAPAN www.teac.com.au WARRANTY PROCEDURE v1.5.2: DEC 2011 Please read the owner