|
|
- Edwina Chase
- 5 years ago
- Views:
Transcription
1 Distributed by: The content and copyrights of the attached material are the property of its owner.
2 Features - 3.5V to 20V DC operation voltage - Temperature compensation - Wide operating voltage range - Open-Collector pre-driver - 25mA maximum sinking output current. - Reverse Polarity Protection Applications - VCD/DVD loader, CD/DVD ROM - Cover detector - Speed measurement - Home appliances - Home safety General Description is an switched Hall-Effect IC which is for contactless switching applications. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier that amplifies the Hall voltage, a schmitt trigger to provide switching hysteresis for noise rejection, and an open-collector output. The bandgap regulator allows a wide operating voltage range. is rated for operating temperature range from -20 C to 85 C and voltage range from 3.5V to 20V. Ordering Information X -XX X - X Single Hall-effect Switch Wafer Body Package Lead Packing Magnetic Characteristics Blank or A~Z : if necessary to specify P: SIP3 W: SOT23 L : Lead Free Blank: Normal Blank : Tube or Bulk A : Tape & Reel A or B Typical Circuit 3.5V ~20V R L ATS 137 DO Digital Output Vss This datasheet contains new product information. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. Rev.A5 Jul 14, /7
3 Functional Block Diagrams 1 Regulator Hall plate Amp 3 2 DO Vss Pin Descriptions Top view 1 : 2 : Vss 3 : DO Name P/I/O Pin # Description P 1 Positive Power Supply Vss P 2 Ground DO O 3 Digital Output 2/7
4 Absolute Maximum Ratings ( at Ta=25 o C ) Characteristics Symbol Values Unit Supply voltage V CC 20 V Reverse Polarity Voltage V RCC -20 V Magnetic flux density B Unlimited Output OFF Voltage Vce 30 V Output on current Continuous Ic 25 ma Operating temperature Ta -20~+85 C Storage temperature Ts -65~+150 C Maximum Junction Temp. Tj 175 C Package Power SIP-3L 400 mw Pd Dissipation SOT23-3L 200 mw Electrical Characteristics (Ta=+ 25 C) Characteristic Symbol Test Conditions Min Typ Max Units Supply voltage V Output saturation voltage Vce(sat) =14V, Ic=20mA mv Output leakage current Icex Vce=14V, =14V - < ua Supply current Icc =20V, Output Open ma Output rise time tr =14V, RL=820Ω, CL=20pF us Output falling time tf =14V, RL=820Ω, CL=20pF us Test Circuit 14V DO RL RL=820 Ohm CL=20 pf CL Test Circuit 3/7
5 Magnetic Characteristics (Ta=25 o C) (1mT=10Gauss) A grade Parameter Symbol Min. Typ. Max. Unit Operate Point Bop Gauss Release point Brp Gauss Hysteresis Bhys Gauss B grade Parameter Symbol Min. Typ. Max. Unit Operate Point Bop Gauss Release point Brp Gauss Hysteresis Bhys Gauss Application Information -Operating principle is a three pins Hall Effect switch IC which can turn magnetic flux variety to digital output signal. In other words, it is an interface from magnetic system to electrical one by Hall effect. The illustrations are shown in Fig.1. Vo Turn off B hys Turn on Magnet S Marking side Vce(sat) B rp B op magnetic flux (Gauss) electrical Fig.1 Hall-effect switch Output driver is open-collector topology and maximum sink current (I sink ) is 25mA. The illustrated circuit is shown as Fig V ~20V R L ATS 137S Vss DO I sink Vo Digital Output Fig.2 Application circuit 4/7
6 Application Information (Continued) Vo will turn on(low) if the S magnetic flux larger than operation point (Bop), and turns off whenever the magnetic flux is removed and lower than release point (Brp). The related waveforms are shown in Fig.3. magnetic flux (mt) Bop S Marking side Brp Vo t Hall Effect switch Vce(sat) t Fig.3 Vo and magnetic flux variety The major applications are for contactless switching and shown as follows: - VCD/DVD loader, CD/DVD ROM: Detect if the tray is opened or closed - Cover detector (open/close): Cellular phone cover detector, Refrigerator door detector, Microwave oven door sensor etc - Home safety: instead of reed relay to detect the situation of door/window. - Due to contactless and without mechanical contact point, its reliability and life cycle are much longer than reed relay. In addition, its switching speed is much faster than mechanical devices. 5/7
7 Marking Information (1) SOT23 (2) SIP3 (Top View) XX YM X ID code A~Z: Non-Lead Free a~z: Lead Free JA: Date code Y : Year M : Month (A~L) (Top View) 137 YWW X ID code A~Z: Non-Lead Free a~z : Lead Free Date code Y : Year WW : Nth week Package Information (1)Package Type: SIP-3L 0.51mm NOM 2.10mm 1.55mm BRANDED SURFACE Active Area Depth Sensor Location Package Dimension 45º 0.38mm 0.7mm 1.57mm 1.47mm 0.41mm 0.41mm 4.17mm 4.04mm mm 45º 3.10mm 2.97mm 1.82 mm 15.50mm 13.00mm 6/7
8 Package Information (Continued) (2)Package Type: SOT23-3L D 2 ( Sensing point ) E HE 0.8mm mm e1 SEE VIEW C e c1(4x) 0.10 C 3X A2 A GAUGE PLANE SEATING PLANE b(3x) c2(4x) A1 VIEW C L L1 c Symbol Dimensions In Millimeters Dimensions In Inches Min. Nom. Max. Min. Nom. Max. A A A b C D E HE L L e e θ 0 o 5 o 10 o 0 o 5 o 10 o θ1 3 o 5 o 7 o 3 o 5 o 7 o θ2 6 o 8 o 10 o 6 o 8 o 10 o 7/7
ATS137. General Description. Features. Applications. Typical Application Circuit 3.5V ~20V ATS137 SINGLE HALL EFFECT SWITCH. V cc. Digital Output GND
Features General Description 3.5V to 20V DC Operation Voltage Temperature Compensation Wide Operating Voltage Range Open-Collector Pre-Driver 25mA Maximum Sinking Output Current Reverse Polarity Protection
More informationHall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function
Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function Features: Operate from 2.8V to 36V supply voltage. On-chip Hall sensor. Internal bandgap regulator allows temperature compensated
More informationNOT RECOMMENDED FOR NEW DESIGN USE AH3377. Applications
USE 7 SIGLE PHASE HALL EFFECT SWITCH Description is a unipolar Hall-Effect sensor for contactless switching applications. The device includes an on-chip Hall voltage generator for magnetic sensing, an
More informationPART OBSOLETE USE AH3774. Applications
PART OBSOLETE USE AH3774 HIGH SENSITIVITY HALL EFFECT LATCH Description Pin Assignments The is an integrated Hall effect latched sensor designed for electronic commutation of brush-less DC motor applications.
More informationFTC S220. FS220 2 Phase High Voltage DC Motor Driver IC. Technology. General Description. Features. Typical Application Circuit
General Description The, a 1-chip composed of hall sensor and output coil drivers, applied to a 2-phase DC motor. The high sensitivity of Hall effect sensor is suitable for motors from mini-type CPU coolers
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD HALL EFFECT MICRO SWITCH IC DESCRIPTION The is a low power, pole independent Hall-effect switch with a latched digital output driver. It can work in 2.5V supply. Either a
More informationAH175 HALL EFFECT LATCH FOR HIGH TEMPERATURE. Description. Pin Assignments. Features Applications. Typical Application Circuit.
Description Pin Assignments is a single-digital-output Hall-Effect latch sensor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier
More informationSINGLE PHASE HALL EFFECT LATCH General Description. Features. Applications
General Description The is an integrated Hall sensor with H- bridged output driver designed for brushless DC motor applications. The device includes an on-chip Hall sensor for magnetic sensing, an amplifier
More informationAH X G - X - A. Tube/Bulk 7 Tape and Reel Ammo Box Part Part Number Suffix Suffix
Features General Description Bipolar Hall Effect Latch Sensor 3.5V to 20V DC Operation Voltage Open Collector Pre-Driver 50mA Output Sink Current Chip Power Reverse-Connection Protection Operating Temperature:
More informationSW REVISED DECEMBER 2016
www.senkomicro.com REVISED DECEMBER 2016 Chopper Stabilized, Precision Hall Effect Latches for Consumer and Industrial Applications FEATURES AND BENEFITS Symmetrical Latch switch points Resistant to physical
More informationMT4106-EN Series Uni-polar, Hall-Effect Magnetic Position Sensors
Features and Benefits BCD Technology Magnetic Switch Type: Uni-polar Wide Operating Voltage Range: Supply Voltage 2.8~24V Specified Operating Temperature Range:-40 ~150 High Magnetic Sensitivity B OP =140Gauss,
More informationHALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS
Data Sheet 27621.3A 3161 X This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85 C. The unipolar switching characteristic makes this
More informationAH3373. Description. Pin Assignments NEW PRODUCT. Applications. Features HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT UNIPOLAR SWITCH AH3373
HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT UNIPOLAR SWITCH Description The is a high voltage high sensitivity Hall Effect Unipolar switch IC designed for proximity, position and level sensing in industrial
More information3185 THRU 3189 HALL-EFFECT LATCHES FOR HIGH-TEMPERATURE OPERATION FEATURES. ABSOLUTE MAXIMUM RATINGS at T A = +25 C V CC GROUND OUTPUT SUPPLY
3185 THRU 3189 Data Sheet 2769.2A X V CC These Hall-effect latches are extremely temperature-stable and stressresistant sensors especially suited for operation over extended temperature ranges to +15 C.
More informationAH287. General Description. Features. Typical Application Circuit HIGH VOLTAGE HALL-EFFECT SMART FAN MOTOR CONTROLLER. 24V Brush-Less DC Fan
Features General Description On Chip Hall Sensor Rotor-Locked Shutdown Automatically Restart Built-in Zener Protection for Output Driver Operating Voltage: 3.8V~28V Output Current: I O(AVE) = 400mA Lead
More informationBIPOLAR HALL-EFFECT POSITION SENSORS
General Description The is an integrated Hall-effect latched sensor designed for electronic commutation of brushless DC motor applications. The device includes an on-chip Hall voltage generator for magnetic
More informationTSH253 High Sensitivity Omni-Polar Hall Effect Switch
Pin Definition: 1. V CC 2. GND 3. Output SOT-23 Pin Definition: 1. V CC 2. Output 3. GND Description TSH253 Hall-effect sensor is a temperature stable, stress-resistant switch. Superior high-temperature
More informationAH3368Q. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTGAE LOW SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH AH3368Q
Description The is an AECQ100 qualified high voltage low sensitivity Hall Effect Unipolar switch IC designed for position and proximity sensing in automotive applications such as in seat and seatbelt buckle,
More information3280, 3281, AND 3283 CHOPPER-STABILIZED, PRECISION HALL-EFFECT LATCHES. Suffix ' LT' & ' UA' Pinning (SOT89/TO-243AA & ultra-mini SIP)
28, 281, AND 28 Data Sheet 2769.2b Suffix ' LT' & ' UA' Pinning (SOT89/TO-24AA & ultra-mini SIP) X V CC 1 SUPPLY 2 GROUND PTCT Dwg. PH--2 Pinning is shown viewed from branded side. OUTPUT The A28--, A281--,
More informationFor Reference Only DUAL-OUTPUT HALL-EFFECT SWITCH FEATURES. ABSOLUTE MAXIMUM RATINGS at T A = +25 C
Data Sheet 27633b Type UGN3235K Hall-effect sensor ICs are bipolar integrated circuits designed for commutation of brushless dc motors, and other rotary encoding applications using multi-pole ring magnets.
More information3141 THRU 3144 SENSITIVE HALL-EFFECT SWITCHES FOR HIGH-TEMPERATURE OPERATION. FEATURES and BENEFITS V CC GROUND OUTPUT SUPPLY
3141 THRU 3144 Data Sheet 27621.6B* FOR HIGH-TEMPERATURE OPERATION X These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to operate continuously
More informationAH3574. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH 3 OUTPUT GND 2
HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH Description The is a high voltage high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position and level sensing in consumer
More informationA3121, A3122, and A3133
A3121, A3122, and A3133 Hall Effect Switches for High Temperature Operation Discontinued Product These parts are no longer in production The device should not be purchased for new design applications.
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD HIGH SENSITIVITY HALL EFFECT SENSOR IC WITH FG OUTPUT DESCRIPTION The UTC H1277 is a semiconducting integrated Hall Effect Sensor IC. It is just like all the hall sensitive
More information2.5~5.5V C AH180. Gnd
Features General Description Micropower operation Operation with magnetic field of either north or south pole (omnipolar) 2.5V to 5.5V battery operation Chopper stabilized Superior temperature stability
More informationMT831X. Uni-polar, High Voltage Hall-Effect Switch IC. 1 Product Description. 4 Applications. 2 Feature. 5. Pin Configuration and Functions
MT8X Product Description The MT8X family is produced by BCD technology with both high performance and high reliability. The Hall IC internally includes an on-chip Hall voltage generator, a voltage regulator
More informationDistributed by: www.jameco.com 1-8-81-4242 The content and copyrights of the attached material are the property of its owner. Data Sheet 27621.2d HALL-EF FECT SWITCH Suffix LT & UA Pinning (SOT89/TO-24AA
More informationTSH188 Ultra High Sensitivity Hall Effect Latch
Pin Definition: 1. V CC 2. GND 3. Output SOT-23 Pin Definition: 1. V CC 2. Output 3. GND Description TSH188 Hall-effect sensor is a temperature stable, stress-resistant sensor. Superior high-temperature
More informationMT1401A-T Flat TO-92 package, Radial lead, bulk packaging (1000pcs/bag)
Features and Benefits CMO Technology Magnetic Type: Latch Wide Operating Voltage Range: upply Voltage 2.8~18V pecified Operating Temperature Range: From 40 ~125 High Magnetic ensitivity Bop=20Gauss, Brp=-20Gauss
More informationSUPPLY GROUND NO (INTERNAL) CONNECTION Data Sheet a SUNSTAR 传感与控制 61 AND 62 Suffix Code 'LH' Pinning (SOT2W) X NC 1
A61 and A62 2-Wire Chopper Stabilized Hall Effect Switches Discontinued Product These parts are no longer in production The device should not be purchased for new design applications. Samples are no longer
More informationSmart motor driver with embedded Hall sensor
Smart motor driver with embedded Hall sensor Features Motor driver with integrated Hall sensor Lock-shutdown protection & auto-restart function Precise magnetic switching thresholds Soft-switch phase-switching
More informationCosemitech. Automotive Product Group. FEATURES and FUNCTIONAL DIAGRAM
FEATURES and FUNCTIONAL DIAGRAM AEC-Q100 automotive qualified Digital Omnipolar-Switch Hall Sensor Superior Temperature Stability Multiple Sensitivity Options (BOP / BRP): ±25 / ±15 Gauss; ±70 /±35 Gauss;
More informationTSH282 Sensitivity Unipolar Hall Effect Switch
TO-92S Pin Definition: 1. V CC 2. GND 3. Output SOT-23 Pin Definition: 1. V CC 2. Output 3. GND Description TSH282 is an unipolar Hall effect sensor IC. It incorporates advanced chopper stabilization technology
More informationSS1350 Unipolar Hall Switch-Low Sensitivity
Packages 3 pin SOT23 (suffix SO) 3 pin SIP (suffix UA) Features and Benefits 3.5V to 24V Operation -40 C to 150 C Superior temperature operation CMOS technology Low current consumption Chopper-stabilized
More informationAH3562Q. Description. Pin Assignments. Applications. Features HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH 3 OUTPUT GND 2
HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT OMNIPOLAR SWITCH Description The is an AECQ100-qualified high-voltage, high-sensitivity Hall effect omnipolar switch IC designed for position and proximity
More informationDISCONTINUED PRODUCT FOR REFERENCE ONLY COMPLEMENTARY OUTPUT POWER HALL LATCH 5275 COMPLEMENTARY OUTPUT POWERHALL LATCH FEATURES
5275 POWER HALL LATCH Data Sheet 27632B X V CC 1 SUPPLY ABSOLUTE MAXIMUM RATINGS at T A = +25 C Supply Voltage, V CC............... 14 V Magnetic Flux Density, B...... Unlimited Type UGN5275K latching
More informationAH3363Q. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH AH3363Q
Description The is an AEC100 qualified high voltage high sensitivity Hall Effect Unipolar switch IC designed for position and proximity sensing in automotive applications such as in seat and seatbelt buckle,
More information深圳市钧敏科技有限公司
PT362 General purpose Hall-effect Latch Applications DC brushless motor VCD/DVD loader, CD/DVD-Rom Cover detector Speed Measurement Home appliances Home safety Package Type P/N: PT362-XX-X TO92-3L (UA)
More informationPT3636 Hi-sensitivity Unipolar Hall Switch
PT3636 Hi-sensitivity Unipolar Hall Switch Applications Automotive Brake Pedal Position detection Proximity detection Weak magnets application Solid state switches P/N: PT3636-XX-X TO92-3L (UA) Features
More informationAPX9141. General Description. Pin Description. Applications. Ordering Information. Hall Effect Sensor IC with Reverse Voltage Protection
Hall Effect Sensor IC with Reverse Voltage Protection Features On-chip Reverse Voltage Protection On-chip Hall Sensor Low Operating Supply Voltage : 3 V High Output Sinking Capability up to 4mA Versatile
More informationCosemitech. Automotive Product Group CH913/CH913L. FEATURES and FUNCTIONAL DIAGRAM APPLICATIONS DESCRIPTION
FEATURES and FUNCTIONAL DIAGRAM Micro-power Omnipolar-Switch Hall Sensor Multiple Sensitivity Options (BOP / BRP): ±33 / ±23 Gauss; Open Drain output ability Chopper stabilized design provides: - Superior
More informationSINGLE PHASE HALL EFFECT LATCH SMART FAN MOTOR CONTROLLER
Description Pin Assignments The is a single chip solution for driving single-coil brushless direct current (BLDC) fans and motors. The integrated full-bridge driver output stage uses soft switching to
More informationNot Recommended for New Design
Features - voltage:. and adjustable output version - Adjustable version output voltage range, 1.2 to 18+4% - 150KHz +15% fixed switching frequency - oltage mode non-synchronous PWM control - Thermal-shutdown
More informationAH1815. Description. Pin Assignments. Features. Applications LOW SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH AH1815 SC59 SOT553 SIP-3
LOW SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a low-sensitivity, micro-power Omnipolar Hall effect switch IC, designed for portable and battery powered consumer
More informationAH30 Series Bipolar Latch Hall Effect Sensor
AH30 Series Bipolar Latch Hall Effect Sensor Outline AH30 Series Hall sensor is one of bipolar excitation single-ended digital output Hall IC. The sensor chip has built-in reverse voltage protection, voltage
More informationAH5792 SINGLE PHASE HALL EFFECT LATCH SMART FAN MOTOR CONTROLLER. Description. Pin Assignments. Features. Applications
Description Pin Assignments The is a single chip solution for driving single-coil brush-less DC fans and motors. The employs a bidirectional full bridge driver output stage for single coil fan motor applications.
More informationMT1321 Series CMOS, Omni-polar, Low Power Hall Sensor
MT1321 eries CMO, Omni-polar, Low Power Hall ensor Features and Benefits CMO Technology Magnetic - Type: Omni - polar Operating Voltage Range: upply Voltage 2.2~5V pecified Operating Temperature Range:
More informationMICROPOWER, GENERAL-SENSITIVE HALL EFFECT SWITCH
Description Pin Assignments The micro power Omni-polar Effect switch IC designed for portable and battery powered equipment such as cellular phones, PDA s and portable PC s. Based on two sensitive Effect
More informationAH920. Pin Assignments. Description. Features. Applications. Typical Applications Circuit. A Product Line of Diodes Incorporated
HIGH SENSITIVITY CMOS HALL-EFFECT LATCH Description The is a Hall-effect latch designed in mixed signal CMOS technology. It is quite suitable for use in automotive, industrial and consumer applications.
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD SINGLE PHASE DC MOTOR DRIVE IC DESCRIPTION The UTC UH477 is particularly designed for a single phase DC motor driver circuit. It includes hall sensor and output coil drivers.
More informationAH37 Series CMOS Bipolar Latch Hall Effect Sensor
AH37 Series CMOS Bipolar Latch Hall Effect Sensor Outline AH37 Series Hall sensor is a digital output Hall IC based on CMOS process, bipolar excitation, with latch function in the output signal. The sensor
More informationDiscontinued Product
346, 356, and 358 Hall Effect Gear-Tooth Sensor ICs Zero Speed Discontinued Product This device is no longer in production. The device should not be purchased for new design applications. Samples are no
More informationDistributed by: www.jameco.com 1-8-81-4242 The content and copyrights of the attached material are the property of its owner. 28, 281, AND 28 Data Sheet 2769.2e HALL-EF FECT LATCHES Suffix ' LT' & ' UA'
More informationMH 249 CMOS High Sensitivity Omni-polar Hall Switch
MH 249 Hall-effect sensor is a temperature stable, stress-resistant switch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.
More informationA3290 and A3291 Chopper Stabilized, Precision Hall Effect Latches for Consumer and Industrial Applications
for Consumer and Industrial Applications Features and enefits Symmetrical switchpoints Resistant to physical stress Superior temperature stability Output short-circuit protection Operation from unregulated
More informationA1225, A1227, and A1229. Hall Effect Latch for High Temperature Operation
A, A27, and A29 Features and Benefits Symmetrical switchpoints Superior temperature stability Operation from unregulated supply Open-drain ma output Reverse Battery protection Activate with small, commercially
More informationAH8113. AiT Semiconductor Inc. APPLICATION TYPICAL APPLICATION ORDERING INFORMATION
DESCRIPTION The is an integrated hall-effect sensor designed specifically to meet the requirements of low-power devices. e.g. as an On/Off switch in Cellular Flip-Phones, with battery operating voltages
More informationUNISONIC TECHNOLOGIES CO., LTD 319 LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO., LTD 319 LINEAR INTEGRATED CIRCUIT SINGLE PHASE DC MOTOR DRIVE IC DESCRIPTION The UTC 319 is particularly designed for a single phase DC motor driver circuit. It includes hall
More informationMH 249 CMOS High Sensitivity Omni-polar Hall Switch α version
MH 249 Hall-effect sensor is a temperature stable, stress-resistant switch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.
More informationAP Khz, 3A PWM Buck DC/DC Converter. Features. General Description. Applications. Description. Pin Assignments
Features - Output voltage: 3.3, 5, 12 and adjustable output version - Adjustable version output voltage range, 1.23 to 37+4% - 150Khz +15% fixed switching frequency - oltage mode non-synchronous PWM control
More informationMT6303 Series Omni-polar, Low Power, MR Switch Sensor
Feature AMR+CMOS monolithic structure High sensitivity B OP = 18Gauss, B RP = 13Gauss Low power consumption Average supply current
More informationA3280, A3281, and A3283 Chopper-Stabilized, Precision Hall-Ef fect Latches
, Hall-Ef fect Latches Features and Benefits Symmetrical switch points Resistant to physical stress Superior temperature stability Output short-circuit protection Operation from unregulated supply Reverse
More informationOrdering Code Product Code Temperature Code Package Code Option Code Packing Form Code AAA-000
Features and Benefits purpose CMOS technology Chopper-stabilized amplifier Low current consumption Operating voltage range from 2.2V to 18V High magnetic sensitivity Multistage Open drain output Thin SOT23
More informationA3134. Discontinued Product
3134 Bipolar Hall Effect Switch for High-Temperature Operation Discontinued Product These parts are no longer in production The device should not be purchased for new design applications. Samples are no
More informationCYD8945 High Reliability Hall Effect Switch IC
CYD8945 High Reliability Hall Effect Switch IC The CYD8945 Hall-Effect switch, produced with ultra-high voltage bipolar technology, has been designed specifically for automotive and industrial applications
More informationAH1911/AH1921. Description. Pin Assignments NEW PRODUCT. Features. Applications. Typical Applications Circuit (Note 4) 2 OUTPUT GND 3 1 VDD
ULTRA-LOW POWER DIGITAL OMNIPLOAR HALL-EFFECT SWITCH Description Pin Assignments The is an ultra-low power digital Omnipolar Hall Effect switch IC from Diodes broad Hall Effect switches family. Thanks
More informationHigh-Temperature Chopper-Stabilized Precision Hall-Effect Switch for 5 V Applications
APS112 Hall-Effect Switch for V Applications FEATURES AND BENEFITS Optimized for applications with regulated power rails Operation from 2.8 to. V AEC-Q1 automotive qualified Operation up to 17 C junction
More informationMP72X High Sensitivity Hall Latch
High Sensitivity Hall Latch Revision 0.2 1. Overview Features Wide Operating Voltage Range: -Single supply voltage 3.5-24V Specified Operating Temperature Range: -From 40C up to 125C High Magnetic Sensitivity
More informationMH258 Specification Micropower Hall Effect Switch
MH258 Hall-effect sensor is a temperature stable, stress-resistant, micro-power switch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.
More informationFeatures and Benefits
HAL24 Hall-effect sensor is a temperature stable, stress-resistant, Low Tolerance of Sensitivity micro-power switch. Superior high-temperature performance is made possible through a dynamic offset cancellation
More informationA3132 and A3133. Ultrasensitive Bipolar Hall Effect Switches. Discontinued Product
3132 and 3133 Ultrasensitive Bipolar Hall Effect Switches Discontinued Product These parts are no longer in production The device should not be purchased for new design applications. Samples are no longer
More informationAH1812. Description. Pin Assignments NEW PRODUCT. Applications. Features. Typical Applications Circuit (Note 4) OUTPUT V DD GND 2
HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a high sensitivity micropower Omnipolar Hall effect switch IC with an open drain output. Designed for portable
More informationA1126. Chopper Stabilized Omnipolar Hall-Effect Switch. Description
Features and Benefits Omnipolar operation Low switchpoint drift Superior temperature stability Insensitive to physical stress Reverse battery protection Robust EMC capability Robust ESD protection Packages:
More informationMT6325 Series Omni-polar, Low Power, MR Switch Sensor
Feature MR+CMOS monolithic structure High sensitivity B OP = 17Gauss, B RP = 14Gauss Low power consumption Average supply current
More informationHALL-EFFECT, DIRECTION-DETECTION SENSORS
Data Sheet 2765.1A* 3422 S V CC X SUPPLY LOGIC DIRECTION E1 GROUND E2 X E1 OUTPUT SPEED Dwg. PH-15 Pinning is shown viewed from branded side. ABSOLUTE IMUM RATINGS Supply Voltage, V CC............. 18
More informationThe package type is in a lead (Pb)-free version was verified by third party organization.
MH 281 is a unipolar Hall effect sensor IC. It incorporates advanced chopper stabilization technology to provide accurate and stable magnetic switch points. The design, specifications and performance have
More informationMT1401A-T Flat TO-92 package, Radial lead, bulk packaging (1000pcs/bag)
MT1401 eries CMO, Latch, HallEffect Magnetic Position ensors Features and Benefits CMO Technology Magnetic Type: Latch Wide Operating oltage Range: upply oltage 3.0~18 pecified Operating Temperature Range:
More informationChopper Stabilized Precision Hall Effect Latches
A122, A1221, Features and Benefits Symmetrical latch switchpoints Resistant to physical stress Superior temperature stability Output short-circuit protection Operation from unregulated supply down to 3
More informationMT4412 Series Bipolar Hall-Effect Sensor with Pull-up Resistor
Bipolar HallEffect ensor with Pullup Resistor Features and Benefits Bipolar Technology Magnetic Type: Bipolar Wide Operating Voltage Range: upply Voltage 3.8~30V pecified Operating Temperature Range: From
More informationSE AAA-000 RE SE AAA-000 RE UA AAA-000 BU UA AAA-000 BU UA AAA-000 CA. SE for TSOT, UA for TO-92(Flat) BU for Bulk, CA for Ammopack
Features and Benefits Wide operating voltage range from 3.5V to 24V Medium sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23 3L and flat
More informationAH5794 SINGLE PHASE HALL EFFECT LATCH FAN MOTOR DRIVER. Description. Pin Assignments NEW PRODUCT. Applications. Features. (Top View) O2 3 V SS TSOT26
Description Pin Assignments The is a single chip solution for driving single-coil brushless direct current (BLDC) fans and motors. The integrated full-bridge driver output stage uses soft switching to
More informationAH1893. Pin Assignments. Description NEW PRODUCT. Features. Applications. Typical Applications Circuit
HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description Pin Assignments The is a high sensitivity micropower Omnipolar Hall effect switch IC with internal pull up and pull down capability.
More informationChopper Stabilized Precision Hall Effect Switches
A1, A11, and A11 Features and Benefits Unipolar switchpoints Resistant to physical stress Superior temperature stability Output short-circuit protection Operation from unregulated supply Reverse battery
More informationMT1101 Series CMOS, Uni-polar, Hall-Effect
MT1101 eries CMO, Unipolar, HallEffect Magnetic Position ensors Features and Benefits CMO Technology Magnetic Type: Unipolar Wide Operating oltage Range: upply oltage 2.8~18 pecified Operating Temperature
More informationData Sheet, V 1.1, Oct TLE4906H TLE4906L. High Precision Hall-Effect Switch. Sensors
Data Sheet, V 1.1, Oct. 2005 TLE4906H High Precision Hall-Effect Switch Sensors Edition 2005-10 Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 München, Germany Infineon Technologies
More informationTable of Contents 1 Functional Diagram General Description Glossary of Terms Absolute Maximum Ratings Pin Definitions and
Features and Benefits Wide operating voltage range from 3.5V to 24V Medium sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23 3L RoHS Compliant
More informationFeatures. General Description. Applications. Pin Configuration. Ordering and Marking Information. Hall Effect Micro Switch IC
Hall Effect Micro Switch IC Features General Description Micro Power Operation for Battery Applications Chopper Stabilized Amplifier Independent of North or South Pole Magnet, Easy for Manufacture Small
More informationThe differential Hall Effect sensor SC9625 provides a high sensitivity and a superior stability over
Features Integrated filter capacitor South and North pole pre-induction possible Larger air gap 9625 3.8 to 24V supply operating range Wide operating temperature range Output compatible with both TTL and
More informationATS635LSE and ATS636LSE Programmable Back Biased Hall-Effect Switch with TPOS Functionality
Features and Benefits Chopper Stabilization Extremely low switchpoint drift over temperature On-chip Protection Supply transient protection Output short-circuit protection Reverse-battery protection True
More informationSingle-Phase Full-Wave Motor Driver with Built-in Hall Sensor. General Description
Single-Phase Full-Wave Motor Driver with uilt-in Hall Sensor Features On-chip Hall Sensor High Sensitivity Hall Effect Sensor IC: ±15G(Typ.) uilt-in Lock Protection and Auto Restart Function Speed Controllable
More informationUS2884. Application Examples. Features and Benefits. Ordering Code Package Code Option Code Packing SE AAA-000 RE. 2 General Description
Features and Benefits Wide operating voltage range from 3.5V to 24V Very high magnetic sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23
More informationJanuary 2009 TLE4906K / TLE4906L. High Precision Hall Effect Switch. Data Sheet V 2.0. Sensors
January 2009 TLE4906K / High Precision Hall Effect Switch Data Sheet V 2.0 Sensors Edition 2009-01 Published by Infineon Technologies AG 81726 Munich, Germany 2009 Infineon Technologies AG All Rights Reserved.
More informationSS1636 Unipolar Hall Switch-High sensitivity
Packages 3 pin TSOT23 (suffix ST) 3 pin SIP (suffix UA) Features and Benefits 2.5V to 5.5V Operation -40 C to 150 C Superior temperature operation range CMOS technology Low current consumption Chopper-stabilized
More informationUNISONIC TECHNOLOGIES CO., LTD PN2222A NPN SILICON TRANSISTOR
UNISONIC TECHNOLOGIES CO., LTD PN2222A NPN GENERAL PURPOSE AMPLIFIER FEATURES * This device is for use as a medium power amplifier and switch requiring collector currents up to 5mA. SOT-89 *Pb-free plating
More informationContinuous-Time Bipolar Switch Family
A1, A2, A3, and A1 Features and Benefits Continuous-time operation Fast power-on time Low noise Stable operation over full operating temperature range Reverse battery protection Solid-state reliability
More informationMT910X. Ratiometric Linear Hall-Effect IC, Analog Output. 1 Product Description. 4 Application. 2 Feature. 5. Pin Configuration and Functions
Product Description The device is a linear Hall effect IC that responds proportionally to magnetic flux density. The device can be used for accurate position sensing in a wide range of applications. The
More informationDiscontinued Product
Discontinued Product This device is no longer in production. The device should not be purchased for new design applications. Samples are no longer available. Date of status change: June 2, 214 Recommended
More informationAH3661 Omnipolar Micropower Hall Effect Sensor
AH3661 Omnipolar Micropower Hall Effect Sensor Outline AH3661 is an Omnipolar micro-power high sensitivity Hall effect sensor which designed for battery-powered handheld digital devices. The sensor chip
More informationUS2882. Bipolar Hall Switch Very High Sensitivity. Features and Benefits. Application Examples. 1 Functional Diagram 2 General Description
Features and Benefits Wide operating voltage range from 3.5V to 24V Very high magnetic sensitivity CMOS technology Chopper-stabilized amplifier stage Low current consumption Open drain output Thin SOT23
More informationMLX92212LSE 3-Wire Hall Effect Latch / Switch
Features and Benefits Low voltage supply : from 2.5V to 5.5V Chopper-stabilized amplifier stage Low power switch: 2.1mA Wide temperature range: -40 C to 150 C Automotive qualified: AEC-Q100 Optimized ESD
More information