Obsolete Product(s) - Obsolete Product(s)
|
|
|
- Damon Sutton
- 5 years ago
- Views:
Transcription
1 OCTAL DUAL SUPPLY BUS TRANSCEIER HIGH SPEED: t PD = 8.5 (MAX.) at CCA =5.0 CCB = 3.3 LOW POWER DISSIPATION: I CCA = I CCB =5µA(MAX.) at T A =25 C LOW NOISE: OLP =0.3 (TYP.) at CCA =5.5 CCB =3.3 SYMMETRICAL OUTPUT IMPEDANCE: I OH = I OL = 24mA (MIN) BALANCED PROPAGATION DELAYS: t PLH t PHL OPERATING OLTAGE RANGE: CCA (OPR) = 4.5 to 5.5 (1.2 Data Retention) CCB (OPR) = 2.7 to 3.6 (1.2 Data Retention) PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 4245 IMPROED LATCH-UP IMMUNITY DESCRIPTION The is a dual supply low voltage CMOS OCTAL BUS TRANSCEIER fabricated with sub-micron silicon gate and double-layer metal wiring C 2 MOS technology. Designed for use as an interface between a 5 bus and a 3.3 bus in a mixed 5/3.3 supply systems, it achieves high speed operation while maintaining the CMOS low power dissipation. Figure 1: Pin Connection And IEC Logic Symbols Table 1: Order Codes PACKAGE SOP TSSOP TSSOP T & R MTR TTR This IC is intended for two-way asynchronous communication between data buses and the direction of data tramission is determined by DIR input. The enable input G can be used to disable the device so that the buses are effectively isolated. The A-port interfaces with the 5 bus, the B-port with the 3.3 bus. All inputs are equipped with protection circuits agait static discharge, giving them 2K ESD immunity and traient excess voltage. SOP August 2004 Rev. 6 1/13
2 Figure 2: Input And Output Equivalent Circuit Table 2: Pin Description Table 3: Truth Table X : Don t Care Z : High Impedance Table 4: Absolute Maximum Ratings PIN N SYMBOL NAME QND FUNCTION 2 DIR Directional Control 3, 4, 5, 6, 7, A1 to A8 Data Inputs/Outputs 8, 9, 10 21, 20, 19, B1 to B8 Data Inputs/Outputs 18, 17, 16, 15, G Output Enable Input 11, 12, 13 Ground (0) 23 NC Not Connected 1 CCA Positive Supply oltage 24 CCB Positive Supply oltage INPUTS FUNCTION OUTPUT G DIR A BUS B BUS L L OUTPUT INPUT A = B L H INPUT OUTPUT B = A H X Z Z Z Symbol Parameter alue Unit CCA Supply oltage -0.5 to +7.0 CCB Supply oltage -0.5 to +7.0 I DC Input oltage -0.5 to CCA I/OA DC I/O oltage -0.5 to CCA I/OB DC I/O oltage -0.5 to CCB I IK DC Input Diode Current ± 20 ma I OK DC Output Diode Current ± 50 ma I OA DC Output Current ± 50 ma I OB DC Output Current ± 50 ma I CCA DC CC or Ground Current ± 200 ma I CCB DC CC or Ground Current ± 100 ma P d Power Dissipation 180 mw T stg Storage Temperature -65 to +150 C T L Lead Temperature (10 sec) 300 C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditio is not implied 2/13
3 Table 5: Recommended Operating Conditio Symbol Parameter alue Unit CCA Supply oltage (note 1) 4.5 to 5.5 CCB Supply oltage (note 1) 2.7 to 3.6 I Input oltage 0 to CCA I/OA I/O oltage 0 to CCA I/OB I/O oltage 0 to CCB T op Operating Temperature -55 to 125 C dt/dv Input Rise and Fall Time (note 2) 0 to 10 / 1) IN from 30% to 70% of CC 2) CCA = 4.5 to 5.5; CCB = 2.7 to 3.6; Table 6: DC Specificatio For CCA Symbol IHA ILA OHA OLA I IA I OZA I CCtA I CCtA Parameter High Level Input oltage Low Level Input oltage High Level Output oltage Low Level Output oltage Input Leakage Current High Impedance Output Leakage Current Quiescent Supply Current CCA CCB () () Test Condition alue T A = 25 C -40 to 85 C -55 to 125 C Min. Typ. Max. Min. Max. Min. Max I O =-100 µa I O =-24 ma I O =100 µa I O =24 ma I = CC or ± 0.1 ± 1 ± 1 µa IA = IHA or ILA IB = IHB or ILB I/OA = CCA or IA = CCA or IB = CCB or IA = CCA IB = CCB or Unit ± 0.5 ± 5 ± 5 µa µa Maximum Quiescent Supply Current / Input (An, DIR, G) ma 3/13
4 Table 7: DC Specificatio For CCB Test Condition alue Symbol IHB ILB OHB OLB I IB I OZB I CCtB I CCtB Parameter High Level Input oltage Low Level Input oltage High Level Output oltage Low Level Output oltage Input Leakage Current High Impedance Output Leakage Current Quiescent Supply Current CCA () CCB () Table 8: Dynamic Switching Characteristics Symbol OLPA OLPB IHDA ILDA IHDB ILDB Maximum Quiescent Supply Current / Input Parameter Dynamic Low Level Quiet Output (note 1, 2) Dynamic Low Level Quiet Output (note 1, 2) Dynamic High oltage Input (note 1, 3) Dynamic Low oltage Input (note 1, 3) Dynamic High oltage Input (note 1, 3) Dynamic Low oltage Input (note 1, 3) T A = 25 C -40 to 85 C -55 to 125 C Min. Typ. Max. Min. Max. Min. Max I O =-100 µa I O =-12 ma I O =-8 ma I O =100 µa I O =12 ma I O =8 ma I = CCA or ± 0.1 ± 1 ± 1 µa IA = IHA or ILA I/Ob = CCb or IA = CCA or IB = CCB or IA = CCA or IB = CCB Test Condition CCA CCB () () ) Worst case package 2) Max number of output defined as (n). Data inputs are driven 0 to 3.3, (n-1) outputs switching and one output at 3) Max number of data inputs (n) switching. (n-1) switching 0 to 3.3. Inputs under test switching: 3 to threshold ( ILD ). 0 to threshold ( IHD ) f = 1MHz Unit ± 0.5 ± 5 ± 5 µa µa ma alue T A = 25 C -40 to 85 C -55 to 125 C Min. Typ. Max. Min. Max. Min. Max Unit 4/13
5 Table 9: AC Electrical Characteristics (C L = 50pF, Input t r = t f = 3) Symbol t PLH t PHL t PZL t PZH t PLZ t PHZ t PLH t PHL t PZL t PZH t PLZ t PHZ t OSLH t OSHL Parameter Propagation Delay Time (An to Bn) Propagation Delay Time (An to Bn) Output Enable Time (G to Bn) Output Enable Time (G to Bn) Output Disable Time (G to Bn) Output Disable Time (G to Bn) Propagation Delay Time (Bn to An) Propagation Delay Time (Bn to An) Output Enable Time (G to An) Output Enable Time (G to An) Output Disable Time (G to An) Output Disable Time (G to An) Output To Output Skew Time (note1, 2) CCB () Test Condition alue (3) T A = 25 C -40 to 85 C -55 to 125 C Min. Typ. Max. Min. Max. Min. Max. 3.0 (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (**) ) Skew is defined as the absolute value of the difference between the actual propagation delay for any two outputs of the same device switching in the same direction, either HIGH or LOW (t OSLH = t PLHm - t PLHn, t OSHL = t PHLm - t PHLn 2) Parameter guaranteed by design 3) Typical values at CCA = 5.0, CCB = 3.3 (*) oltage range is 3.0 ± 0.3 Unit 5/13
6 Table 10: Capacitive Characteristics Test Condition alue Symbol C INA C I/O C PD C PD Parameter Input Capacitance Input/Output Capacitance Dynamic Low Level Quiet Output (note 1) A to B Dynamic Low Level Quiet Output (note 1) B to A 1) C PD is defined as the value of the IC s internal equivalent capacitance which is calculated from the operating current coumption without load. (Refer to Test Circuit). Average current can be obtained by the following equation. I CC(opr) = C PD x CC x f IN + I CC /8 (per circuit) Figure 3: Test Circuit t PLH, t PHL t PZLH, t PLZ t PZH, t PHZ CCA () CCB () C L = 50pF or equivalent (includes jig and probe capacitance) R L = R 1 = 500Ω or equivalent R T = Z OUT of pulse generator (typically 50Ω) T A = 25 C -40 to 85 C -55 to 125 C Min. Typ. Max. Min. Max. Min. Max. open open TEST SWITCH Open 2 CC Open Unit 6/13
7 Figure 4: Waveform - Propagation Delays (f=1mhz; 50% duty cycle) Figure 5: Waveform - Output Enable And Disable Time (f=1mhz; 50% duty cycle) 7/13
8 SO-24 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A A B C D E e H h L k ddd C 8/13
9 TSSOP24 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A A A b c D E e 0.65 BSC BSC H K L A A2 A1 b e D c K L H E PIN 1 IDENTIFICATION B 9/13
10 Tape & Reel SO-24 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A C D N T Ao Bo Ko Po P /13
11 Tape & Reel TSSOP24 MECHANICAL DATA DIM. mm. inch MIN. TYP MAX. MIN. TYP. MAX. A C D N T Ao Bo Ko Po P /13
12 Table 11: Revision History Date Revision Description of Changes 27-Aug Ordering Codes Revision - pag /13
13 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no respoibility for the coequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No licee is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specificatio mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners 2004 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 13/13
Obsolete Product(s) - Obsolete Product(s)
16-BIT DUAL SUPPLY BUS TRANSCEIER LEEL TRANSLATOR WITH A SIDE SERIES RESISTOR HIGH SPEED: t PD = 4.4ns (MAX.) at T A =85 C CCA = 3.0 CCB = 2.3 LOW POWER DISSIPATION: I CCA = I CCB = 20µA(MAX.) at T A =85
74LVC373ATTR OCTAL D-TYPE LATCH HIGH PERFORMANCE
OCTAL D-TYPE LATCH HIGH PERFORMANCE 5V TOLERANT INPUTS HIGH SPEED: t PD = 6.8 (MAX.) at V CC = 3V POWER DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL OUTPUT IMPEDANCE: I OH = I OL = 24mA (MIN) at V
74LVX257 LOW VOLTAGE CMOS QUAD 2 CHANNEL MULTIPLEXER (3-STATE) WITH 5V TOLERANT INPUTS
LOW VOLTAGE CMOS QUAD 2 CHANNEL MULTIPLEXER (3-STATE) WITH 5V TOLERANT INPUTS HIGH SPEED: t PD =5.8ns (TYP.) at V CC = 3.3V 5V TOLERANT INPUTS POWER-DOWN PROTECTION ON INPUTS INPUT VOLTAGE LEVEL: V IL
Obsolete Product(s) - Obsolete Product(s)
74CXH162245 LOW OLTAGE CMOS 16-BIT BUS TRANSCEIER (3-STATE) WITH 3.6 TOLERANT INPUTS AND OUTPUTS 3.6 TOLERANT INPUTS AND OUTPUTS HIGH SPEED A OUTPUTS : t PD = 3.4 (MAX.) at CC =3.0to3.6 t PD = 4.3 (MAX.)
Obsolete Product(s) - Obsolete Product(s)
HIGH SPEED: f MAX = 180 MHz (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON INPUTS SYMMETRICAL OUTPUT
74LVQ14 LOW VOLTAGE CMOS HEX SCHMITT INVERTER
LOW VOLTAGE CMOS HEX SCHMITT INVERTER HIGH SPEED: t PD = 6 ns (TYP.) at V CC = 3.3 V HYSTERESIS INPUT VOLTAGE: V H = 650mV (TYP.) at V CC = 3.0 V COMPATIBLE WITH TTL OUTPUTS LOW POWER DISSIPATION: I CC
74LCX257 LOW VOLTAGE CMOS QUAD 2 CHANNEL MULTIPLEXER WITH 5V TOLERANT INPUTS AND OUTPUTS (3-STATE)
LOW VOLTAGE CMOS QUAD 2 CHANNEL MULTIPLEXER WITH 5V TOLERANT INPUTS AND OUTPUTS (3-STATE) 5V TOLERANT INPUTS AND OUTPUTS HIGH SPEED: t PD = 6.0 ns (MAX.) at V CC = 3V POWER DOWN PROTECTION ON INPUTS AND
74LVQ280 9 BIT PARITY GENERATOR
9 BIT PARITY GENERATOR HIGH SPEED: t PD = 8 ns (TYP.) at V CC = 3.3 V COMPATIBLE WITH TTL OUTPUTS LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C LOW NOISE: V OLP = 0.3V (TYP.) at V CC = 3.3V 75Ω
74LCX646TTR LOW VOLT. CMOS OCTAL BUS TRANSCEIVER/REGISTER WITH 5 VOLT TOLERANT INPUTS AND OUTPUTS(3-STATE)
74LCX646 LOW VOLT. CMOS OCTAL BUS TRANSCEIVER/REGISTER WITH 5 VOLT TOLERANT INPUTS AND OUTPUTS(3-STATE) 5V TOLERANT INPUTS AND OUTPUTS HIGH SPEED: t PD = 7.0 ns (MAX.) at V CC = 3V POWER DOWN PROTECTION
74LCX374 OCTAL D-TYPE FLIP FLOP NON-INVERTING (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS
OCTAL D-TYPE FLIP FLOP NON-INVERTING (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS 5V TOLERANT INPUTS AND OUTPUTS HIGH SPEED: f MAX = 150 MHz (MIN.) at V CC = 3V POWER DOWN PROTECTION ON INPUTS AND OUTPUTS
74LCX573TTR OCTAL D-TYPE LATCH NON-INVERTING (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS
OCTAL D-TYPE LATCH NON-INVERTING (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS 5V TOLERANT INPUTS AND OUTPUTS HIGH SPEED : t PD = 8.0 (MAX.) at V CC = 3V POWER DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL
74LVX05 LOW VOLTAGE CMOS HEX INVERTER (OPEN DRAIN) WITH 5V TOLERANT INPUTS
LOW VOLTAGE CMOS HEX INVERTER (OPEN DRAIN) WITH 5V TOLERANT INPUTS HIGH SPEED: t PD = 4.8ns (TYP.) at V CC = 3.3V 5V TOLERANT INPUTS INPUT VOLTAGE LEVEL: V IL =0.8V, V IH =2V at V CC =3V LOW POWER DISSIPATION:
74VHC08 QUAD 2-INPUT AND GATE
QUAD 2-INPUT AND GATE HIGH SPEED: t PD = 4.3 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON
74LCX245TTR LOW VOLTAGE CMOS OCTAL BUS TRANSCEIVER(3-STATE) WITH 5V TOLERAT INPUTS AND OUTPUTS
LOW VOLTAGE CMOS OCTAL BUS TRANSCEIVER(3-STATE) WITH 5V TOLERAT INPUTS AND OUTPUTS 5V TOLERANT INPUTS AND OUTPUTS HIGH SPEED : t PD = 7.0 ns (MAX.) at V CC = 3V POWER DOWN PROTECTION ON INPUTS AND OUTPUTS
Obsolete Product(s) - Obsolete Product(s)
QUAD 2-INPUT AND GATE HIGH SPEED: t PD = 4.7 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN.), V IL = 0.8V (MAX) POWER DOWN PROTECTION
74VHCT00ATTR QUAD 2-INPUT NAND GATE
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 5 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN.), V IL = 0.8V (MAX) POWER DOWN PROTECTION
Obsolete Product(s) - Obsolete Product(s)
16-BIT BUS BUFFER (NON INVERTED) WITH 3-STATE OUTPUTS, 5V TOLERANT INPUT HIGH SPEED: t PD = 5.3 ns (TYP.) at V CC =3V 5V TOLERANT INPUT LOW POWER DISSIPATION: I CC =4µA (MAX.) at T A =25 C INPUT VOLTAGE
74VHC174 HEX D-TYPE FLIP FLOP WITH CLEAR
HEX D-TYPE FLIP FLOP WITH CLEAR HIGH SPEED: f MAX = 175MHz (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION
74VHC20 DUAL 4-INPUT NAND GATE
DUAL 4-INPUT NAND GATE HIGH SPEED: t PD = 3.3 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON
74LVQ11TTR TRIPLE 3-INPUT AND GATE
TRIPLE 3-INPUT AND GATE HIGH SPEED: t PD = 4.7ns (TYP.) at V CC = 3.3 V COMPATIBLE WITH TTL OUTPUTS LOW POWER DISSIPATION: I CC = 2µA (MAX.) at T A =25 C LOW NOISE: V OLP = 0.3V (TYP.) at V CC = 3.3V 75Ω
74VHC132 QUAD 2-INPUT SCHMITT NAND GATE
QUAD 2-INPUT SCHMITT NAND GATE HIGH SPEED: t PD = 3.9 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C TYPICAL HYSTERESIS: V h = 1V at V CC = 4.5V POWER DOWN PROTECTION ON
M74HC245TTR OCTAL BUS TRANSCEIVER WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL BUS TRANSCEIVER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 10 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
74LCX244TTR LOW VOLTAGE CMOS OCTAL BUS BUFFER (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS
LOW VOLTAGE CMOS OCTAL BUS BUFFER (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS 5V TOLERANT INPUTS AND OUTPUTS HIGH SPEED : t PD = 6.5 ns (MAX.) at V CC = 3V POWER DOWN PROTECTION ON INPUTS AND OUTPUTS
Obsolete Product(s) - Obsolete Product(s)
TRIPLE 3-INPUT NOR GATE HIGH SPEED: t PD = 4.1 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON
74VHCT244ATTR OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 5.4 ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4 µa (MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN.),
74LVC244ATTR LOW VOLTAGE CMOS QUAD BUS BUFFERS (3-STATE) HIGH PERFORMANCE
LOW VOLTAGE CMOS QUAD BUS BUFFERS (3-STATE) HIGH PERFORMANCE 5V TOLERANT INPUTS HIGH SPEED: t PD = 5.9ns (MAX.) at V CC = 3V POWER DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL OUTPUT IMPEDANCE: I
74AC574B OCTAL D-TYPE FLIP-FLOP WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL D-TYPE FLIP-FLOP WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: f MAX = 250MHz (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 %
74LVX04TTR LOW VOLTAGE CMOS HEX INVERTER WITH 5V TOLERANT INPUTS
LOW OLTAGE CMOS HEX INERTER WITH 5 TOLERANT INPUTS HIGH SPEED : t PD = 4.1ns (TYP.) at CC = 3.3 5 TOLERANT INPUTS INPUT OLTAGE LEEL : IL =0.8, IH =2 at CC =3 LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at
74VHCT16244ATTR 16-BIT BUS BUFFER WITH 3-STATE OUTPUTS (NON INVERTED)
16-BIT BUS BUFFER WITH 3-STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 5.4 ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =4µA (MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH =2V (MIN.) V IL
Obsolete Product(s) - Obsolete Product(s)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 10 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
74LVX132TTR LOW VOLTAGE CMOS QUAD 2-INPUT SCHMITT NAND GATE WITH 5V TOLERANT INPUTS
LOW VOLTAGE CMOS QUAD 2-INPUT SCHMITT NAND GATE WITH 5V TOLERANT INPUTS HIGH SPEED : t PD = 5.9ns (TYP.) at V CC = 3.3V 5V TOLERANT INPUTS LOW POWER DISSIPATION: I CC = 2 µa (MAX.) at T A =25 C TYPICAL
74LCX00TTR LOW VOLTAGE CMOS QUAD 2-INPUT NAND GATE WITH 5V TOLERANT INPUTS
LOW VOLTAGE CMOS QUAD 2-INPUT NAND GATE WITH 5V TOLERANT INPUTS 5V TOLERANT INPUTS HIGH SPEED : t PD = 4.3ns (MAX.) at V CC = 3V POWER DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL OUTPUT IMPEDANCE:
Obsolete Product(s) - Obsolete Product(s)
HEX BUS BUFFER WITH 3 STATE OUTPUT INVERTING HIGH SPEED: t PD = 9 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
Obsolete Product(s) - Obsolete Product(s)
OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT NON INVERTING HIGH SPEED: t PD = 12 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
Obsolete Product(s) - Obsolete Product(s)
QUAD 2 CHANNEL MULTIPLEXER (3-STATE) HIGH SPEED : t PD = 11 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT
74V1T126CTR SINGLE BUS BUFFER (3-STATE)
SINGLE BUS BUFFER (3-STATE) HIGH SPEED: t PD = 3.6ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN), V IL = 0.8V (MAX) POWER DOWN
Obsolete Product(s) - Obsolete Product(s)
OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT NON INVERTING HIGH SPEED: t PD = 13 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
74ACT240TTR OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (INVERTED)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (INVERTED) HIGH SPEED: t PD = 5ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS V IH = 2V (MIN.), V IL = 0.8V
Obsolete Product(s) - Obsolete Product(s)
Low voltage CMOS octal bus buffer (3-state) with 5V tolerant inputs and outputs Features 5V tolerant inputs and outputs High speed: t PD = 8.0ns (Max) at V CC = 3V Power down protection on inputs and outputs
M74HC563TTR OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT INVERTING
OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT INVERTING HIGH SPEED: t PD = 13 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
M74HC374TTR OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING
OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING HIGH SPEED: f MAX = 90MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC
Obsolete Product(s) - Obsolete Product(s)
SINGLE SCHMITT INERTER HIGH SPEED: t PD = 4.3ns (TYP.) at CC =5 LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C TYPICAL HYSTERESIS: h =1 at CC =4.5 POWER DOWN PROTECTION ON INPUT SYMMETRICAL OUTPUT
74AC244B OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 3.8ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
Obsolete Product(s) - Obsolete Product(s)
OCTAL BUS TRANSCEIVER WITH 3 STATE OUTPUTS (INVERTED) HIGH SPEED: t PD = 13ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V
M74HC273TTR OCTAL D TYPE FLIP FLOP WITH CLEAR
OCTAL D TYPE FLIP FLOP WITH CLEAR HIGH SPEED : f MAX = 66 MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT
M74HC151TTR 8 CHANNEL MULTIPLEXER
8 CHANNEL MULTIPLEXER HIGH SPEED: t PD = 17 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
74AC541B OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 4ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
Obsolete Product(s) - Obsolete Product(s)
SINGLE BUS BUFFER (3-STATE) HIGH SPEED: t PD = 3.8ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA (MAX.)atT A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON INPUTS
74V1G77CTR SINGLE D-TYPE LATCH
SINGLE D-TYPE LATCH HIGH SPEED: t PD = 4.4ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON INPUTS SYMMETRICAL
Obsolete Product(s) - Obsolete Product(s)
OCTAL D TYPE FLIP FLOP HIGH SPEED : f MAX = 66 MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
74AC257B QUAD 2 CHANNEL MULTIPLEXER (3-STATE)
QUAD 2 CHANNEL MULTIPLEXER (3-STATE) HIGH SPEED: t PD = 4.5ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω TRANSMISSION
74ACT541TTR OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 4ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS V IH = 2V (MIN.), V IL =
Obsolete Product(s) - Obsolete Product(s)
7 STAGE BINARY COUNTER HIGH SPEED : f MAX = 79 MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
Obsolete Product(s) - Obsolete Product(s)
1-bit dual supply bus buffer level translator with A-side series resistor Features High speed: t PD = 4.4ns (Max.) at T A = 85 C V CCB = 1.65V; V CCA = 3.0V Low power dissipation: I CCA = I CCB = 5µA(Max.)
Obsolete Product(s) - Obsolete Product(s)
SINGLE 2-INPUT NOR GATE HIGH SPEED: t PD = 3.6ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON INPUTS
74V1T00CTR SINGLE 2-INPUT NAND GATE
SINGLE 2-INPUT NAND GATE HIGH SPEED: t PD = 5.0ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH =2V(MIN),V IL =0.8V(MAX) POWER DOWN PROTECTION
Obsolete Product(s) - Obsolete Product(s)
SINGLE 2-INPUT NAND GATE HIGH SPEED: t PD = 5.0ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH =2V(MIN),V IL =0.8V(MAX) POWER DOWN PROTECTION
Obsolete Product(s) - Obsolete Product(s)
SINGLE POSITIVE EDGE TRIGGERED D-TYPE FLIP-FLOP HIGH SPEED: f MAX = 180MHz (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH =2V(MIN),V IL =0.8V(MAX)
74V1G00CTR SINGLE 2-INPUT NAND GATE
SINGLE 2-INPUT NAND GATE HIGH SPEED: t PD = 3.7ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON INPUTS
74V1G79CTR SINGLE POSITIVE EDGE TRIGGERED D-TYPE FLIP-FLOP
SINGLE POSITIVE EDGE TRIGGERED D-TYPE FLIP-FLOP HIGH SPEED: f MAX = 180MHz (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER
M74HC283TTR 4-BIT BINARY FULL ADDER
4-BIT BINARY FULL ADDER HIGH SPEED : t PD = 17 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
74V1T07CTR SINGLE BUFFER (OPEN DRAIN)
SINGLE BUFFER (OPEN DRAIN) HIGH SPEED: t PD = 4.3ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS: V IH = 2V (MIN), V IL = 0.8V (MAX) POWER DOWN PROTECTION
M74HC299TTR 8 BIT PIPO SHIFT REGISTER WITH ASYNCHRONOUS CLEAR
8 BIT PIPO SHIFT REGISTER WITH ASYNCHRONOUS CLEAR HIGH SPEED : f MAX = 80MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
74LCX139 Low voltage CMOS Dual 2 to 4 decoder / demultiplexer Features Description Order codes
Low voltage CMOS Dual 2 to 4 decoder / demultiplexer Features 5V tolerant inputs High speed: t PD = 6.2ns (Max) at V CC = 3V Power down protection on inputs and outputs Symmetrical output impedance: I
74AC161B SYNCHRONOUS PRESETTABLE 4-BIT COUNTER
SYNCHRONOUS PRESETTABLE 4-BIT COUNTER HIGH SPEED: f MAX = 125MHz (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 8µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω TRANSMISSION
M74HC175TTR QUAD D-TYPE FLIP FLOP WITH CLEAR
QUAD D-TYPE FLIP FLOP WITH CLEAR HIGH SPEED : t PD = 16 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT
M74HCT244TTR OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED)
OCTAL BUS BUFFER WITH 3 STATE OUTPUTS (NON INVERTED) HIGH SPEED: t PD = 15 ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V
Obsolete Product(s) - Obsolete Product(s)
SINGLE INVERTER (OPEN DRAIN) HIGH SPEED: t PD = 3.7ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL = 28% V CC (MIN.) POWER DOWN PROTECTION ON
M74HC107TTR DUAL J-K FLIP FLOP WITH CLEAR
DUAL J-K FLIP FLOP WITH CLEAR HIGH SPEED : f MAX = 80MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT
M74HC164TTR 8 BIT SIPO SHIFT REGISTER
8 BIT SIPO SHIFT REGISTER HIGH SPEED : f MAX = 62MHz (TYP.) at V CC =6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL =28%V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
Description. Order code Temperature range Package Packaging Marking
Low-voltage CMOS quad bus buffer (3-state) with 5 V tolerant inputs and outputs Datasheet production data Features 5 V tolerant inputs and outputs High speed t PD = 5.2 ns (max.) at V CC = 3 V Power-down
M74HC4094TTR 8 BIT SIPO SHIFT LATCH REGISTER (3-STATE)
8 BIT SIPO SHIFT LATCH REGISTER (3-STATE) HIGH SPEED : f MAX =80MHz(TYP.)atV CC =6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH =V NIL =28%V CC (MIN.) SYMMETRICAL OUTPUT
Obsolete Product(s) - Obsolete Product(s)
SINGLE 2-INPUT NAND GATE 5V TOLERANT INPUTS HIGH SPEED: t PD = 4.7ns (MAX.) at V CC =3V LOW POWER DISSIPATION: I CC =1µA (MAX.)atT A =25 C POWER DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL OUTPUT
74AC10B TRIPLE 3-INPUT NAND GATE
TRIPLE 3-INPUT NAND GATE HIGH SPEED: t PD = 4ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω TRANSMISSION LINE DRIVING
74AC00B QUAD 2-INPUT NAND GATE
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 4ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω TRANSMISSION LINE DRIVING
M74HC259TTR 8 BIT ADDRESSABLE LATCH
8 BIT ADDRESSABLE LATCH HIGH SPEED : t PD = 20 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
Obsolete Product(s) - Obsolete Product(s)
HEX INVERTER (SINGLE STATE) HIGH SPEED: t PD = 5ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 10% V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
74ACT00B QUAD 2-INPUT NAND GATE
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 4.5ns (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS V IH = 2V (MIN.), V IL = 0.8V (MAX.) 50Ω TRANSMISSION
M74HC595TTR 8 BIT SHIFT REGISTER WITH OUTPUT LATCHES (3 STATE)
8 BIT SHIFT REGISTER WITH OUTPUT LATCHES (3 STATE) HIGH SPEED: f MAX = 59MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.)
M74HC393TTR DUAL BINARY COUNTER
DUAL BINARY COUNTER HIGH SPEED : f MAX = 79 MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
74LX1G132CTR SINGLE 2-INPUT SCHMITT NAND GATE
SINGLE 2-INPUT SCHMITT NAND GATE 5V TOLERANT INPUTS HIGH SPEED: t PD = 5.5ns (MAX.) at V CC =3V LOW POWER DISSIPATION: I CC =1µA (MAX.)atT A =25 C TYPICAL HYSTERESIS: V h =1V at V CC =4.5V POWER DOWN PROTECTION
M74HCT574TTR OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING
OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING HIGH SPEED: f MAX = 50MHz (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.)
Obsolete Product(s) - Obsolete eproduct(s)
QUAD BUS BUFFER (3-STATE) HIGH SPEED: t PD = 8 (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4μA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
74AC74B DUAL D-TYPE FLIP FLOP WITH PRESET AND CLEAR
DUAL D-TYPE FLIP FLOP WITH PRESET AND CLEAR HIGH SPEED: f MAX = 300MHz (TYP.) at V CC = 5V LOW POWER DISSIPATION: I CC = 2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) 50Ω
M74HC51TTR DUAL 2 WIDE 2 INPUT AND/OR INVERT GATE
DUAL 2 WIDE 2 INPUT AND/OR INVERT GATE HIGH SPEED: t PD = 11ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
M74HC160TTR SYNCHRONOUS PRESETTABLE 4-BIT COUNTER
SYNCHRONOUS PRESETTABLE 4-BIT COUNTER HIGH SPEED : f MAX = 62 MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
Obsolete Product(s) - Obsolete Product(s)
SYNCHRONOUS PRESETTABLE 4-BIT COUNTER HIGH SPEED : f MAX = 62 MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
Obsolete Product(s) - Obsolete Product(s)
8 BINARY COUNTER REGISTER WITH 3 STATE OUTPUT HIGH SPEED: f MAX = 61 MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
74ACT157TTR QUAD 2 CHANNEL MULTIPLEXER
QUAD 2 CHANNEL MULTIPLEXER HIGH SPEED: t PD = 5.5 ns (TYP.) at V CC =5V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS V IH = 2V (MIN.), V IL = 0.8V (MAX.) 50Ω TRANSMISSION
M74HC251TTR 8-CHANNEL MULTIPLEXER (3-STATE)
8-CHANNEL MULTIPLEXER (3-STATE) HIGH SPEED : t PD = 17 ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT
Obsolete Product(s) - Obsolete Product(s)
QUAD 2 CHANNEL MULTIPLEXER HIGH SPEED: t PD = 10ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
M74HC10TTR TRIPLE 3-INPUT NAND GATE
TRIPLE 3-INPUT NAND GATE HIGH SPEED: t PD = 8ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
Obsolete Product(s) - Obsolete Product(s)
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 8ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE:
M74HC74TTR DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR
DUAL D TYPE FLIP FLOP WITH PRESET AND CLEAR HIGH SPEED : f MAX = 67MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =2µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
M74HC690TTR DECADE COUNTER/REGISTER (3-STATE)
DECADE COUNTER/REGISTER (3-STATE) HIGH SPEED: f MAX = 53 MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT
M74HCT02TTR QUAD 2-INPUT NOR GATE
QUAD 2-INPUT NOR GATE HIGH SPEED: t PD = 15 ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) BALANCED PROPAGATION
Obsolete Product(s) - Obsolete Product(s)
QUAD 2-INPUT NAND GATE HIGH SPEED: t PD = 12ns (TYP.) at V CC = 4.5V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C COMPATIBLE WITH TTL OUTPUTS : V IH = 2V (MIN.) V IL = 0.8V (MAX) BALANCED PROPAGATION
M74HC191TTR 4 BIT SYNCHRONOUS UP/DOWN COUNTERS
4 BIT SYNCHRONOUS UP/DOWN COUNTERS HIGH SPEED : f MAX = 61 MHz (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC =4µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL
Obsolete Product(s) - Obsolete Product(s)
HEX INVERTER (OPEN DRAIN) HIGH SPEED: t PD = 10ns (TYP.) at V CC = 6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) WIDE OPERATING VOLTAGE RANGE:
M74HC4049TTR HEX BUFFER/CONVERTER (INVERTER)
HEX BUFFER/CONVERTER (INVERTER) HIGH SPEED: t PD = 8ns (TYP.) at V CC =6V LOW POWER DISSIPATION: I CC = 1µA(MAX.) at T A =25 C HIGH NOISE IMMUNITY: V NIH = V NIL = 28 % V CC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE: