Multifunctional inverter. Inverter TIG welding devices

Transcription

1 Multifunctional inverter Inverter TIG welding devices

2 Quality made in Europe Multifunctional inverter KOMBI model range for MIG/MAG, TIG and electrode welding Light and robust multifunctional inverters, ideal for use on the construction site Hot-start function XXIgnition aid for igniting the arc on a stick electrode for electrod welding. An automatic, short-term increase in the welding current ensures immediate stable ignition of the arc Arc force control XXThe welding output in electrode welding is kept as constant as possible at the preset value. The arc is stable (even with difficult electrodes or positions). Benefits: the welding results are more uniform. Anti-stick function XXIf the electrode inadvertently sticks on the workpiece, the welding current is switched off. The electrode does not anneal and can be easily removed from the workpiece. Pulse welding in TIG mode with pulse box XXWeld faults at the start and end of the weld, e.g., in pipe welding, are avoiding by pulsing. wires. This makes MIG welding possible, e.g., on construction sites without a gas cylinder, a major mobility benefit. Lift-arc ignition (KOMBI 7 ED, KOMBI 70, KOMBI 30) XXScratch start ignition in TIG welding with minimal current. The preset welding current is not released until the arc has ignited. The benefit is easy ignition without the tungsten tip sticking on the workpiece, and thus a stable arc. Configurable electronic choke (KOMBI 7, KOMBI 70, KOMBI 30) XXFor optimum adaptation of the arc, from hard to soft, to meet requirements -roll feed (KOMBI 70, KOMBI 30) XXFor precise wire feeding, also perfect for aluminium wires Process XXMIG/MAG XXTIG DC with LIFT-ARC (KOMBI 7/70 /30) XXElectrode welding XXFlux core wire welding without gas (KOMBI 7 ED) Sheet thicknesses XXTIG from approx. 0. mm XXMIG/MAG from approx. mm XXElectrode from approx. mm Base materials XXLow alloy materials XXHigh alloy materials XXConstruction steels XXCoated construction steels XXCrNi steels ferritic/austenitic XXDuplex steels XXNickel-based materials XXCopper XXAluminium XXSpecial materials Typical applications XXPlant, container, machine, steel construction XXMaintenance/repairs XXVehicle manufacturing/construction machinery XXPlant and pipeline construction XXConstruction site and mobile use MIG welding without a cylinder (KOMBI 7 ED) XXThe KOMBI 7 ED extends the field of application through the ability to use flux core Polarity inversion for the use of flux core The open design of the KOMBI 7 ED wires with the KOMBI 7 ED means that kg wire spools can be used. The controls Setting button - Electronic inductivity Adjustment Wire feed Welding method selection switch (electrode - TIG MIG/MAG) Selector switch -/-cycle LED overheating indicator Voltage setting Setting button - Electronic inductivity Welding current socket (+) Welding current socket (-) Voltage setting Welding current setting Adjustment Wire feed Welding method selection switch (electrode - TIG MIG/MAG) Welding current setting LED overheating indicator LED display: "On" - "Off" Selector switch -/-cycle Remote control connection Welding current socket (+) Torch connection Welding current socket (-) The controls on the KOMBI 70 and KOMBI 30 are identical Torch connection

3 Quality made in Europe C kg mm (70 A) (70 A) (70 A) 30 ±0% (0 A) 30 (30 A) A (0 A) 0 (30 A) (0 A) 0 (30 A) x 00 ±0% 7 7 0/0 IP 3S F C x 00 x x 7 x 8 70 x 7 x 8 EN 0 97-;-3;-0 / S mark / EMC - class A KOMBI 7 ED With Lift arc ignition MIG/MAG KOMBI Multifunctional inverter mm A VA % A A kva % A A kva % A V V A Hz A KOMBI KOMBI 70 TIG inverters Technical specifications Weldable electrode Ø Setting range MIG/MAG Power consumption MIG MIG AC duty cycle 0 C MIG AC welding current at DC 00% TIG DC setting range Power consumption TIG DC TIG DC duty cycle TIG DC welding current DC 00% Electrode setting range Electrode power consumption at 00% Electrode electrode Electrode welding current DC 00% Mains voltage Open circuit voltage Maximum current consumption Frequency Fuse Degree of protection Insulation class Operating temperature Weight Dimensions (L x W x H) Standards KOMBI 7 ED Grinding Model KOMBI 30 SPA mm²/ks 0- mm²/ Pratica /ground clamp 00 A SPA mm²/ks 3-0 mm²/ Pratica /ground clamp 00 A SPA 3 mm²/ks 3-0 mm²/ Pratica /ground clamp 00 A Basket spool adapter Basket spool adapter KA, with quick release coupling Basket spool adapter KA 3, two-part Centring adapter for D 00 coils two-part Welding workplace equipment Basket spool adapter KA Basket spool adapter KA 3 Centring adapter Accessories KOMBI Manual remote control with m control cable, accessories for multifunctional inverter SCHWEIßKRAFT KOMBI 7 ED, for remotely controlling the welding current in electrode and TIG welding PULSE BOX with m control cable Supports, e.g., welding of thin sheets and out-of-position welding Remote control foot pedal, with 8 m control cable With the remote control foot pedal, you can switch the arc on and off independently of the torch button. This also gives the welder the ability to adapt the arc to various requirements while welding. G-BOX - Adapter for operation with generator (for KOMBI 7 ED). The G-Box is an adapter for operations with generators. It sits between the generator and the welding equipment and protects the inverter against power peaks, max. 00 V, rated current 7 A 0%, max. output current 0 A Trolley for all portable SK devices and gas cylinder up to max. 0 L Pressure regulator Argon/CO large Gasless filler wire MT-FD.kg, D00, 0.9 mm* Gasless filler wire MT-CS kg, K 300,, mm*. *For more details see MIG/MAG wire/filler wire in the Filler wire section Manual remote control PULS-BOX G-Box Remote control foot pedal Plasma cutting equipment Welding workplace equipment Consisting of: welding cable PVC m with electrode holder and welding cable plug, earth cable PVC 3 m with ground clamp, and welding cable plug, chipping hammer, wire brush -row, manual protection shield polypropylene (CE) welding visor DIN 9, lens 90x0 mm, -finger gloves Electrochemical processing Drive trolley Welding accessories Torch MIG/MAG SMB /3 m with pushbutton Torch MIG/MAG SMB /3 m with pushbutton Torch MIG/MAG SMB 3/3 m with pushbutton Brenner WIG WP 7 V/ m mit Gasregler für KOMBI 7 ED Torch TIG WP V/ m for KOMBI 70 and KOMBI 30 Electrode inverters Torches for the KOMBI model range

4 Inverter TIG welding devices New EASY-Tig 0 DC PULSE portable TIG DC inverter for workshops and mobile use EASY-TIG 0 AC/DC PULSE portable TIG DC inverter for workshops and mobile use XXAll devices implemented with state-of-theart inverter technology XXPerfectly suited for mobile work (on ladders, on scaffolding, etc.) and also generally suitable for outdoor work thanks to IP 3 degree of protection XXTIG DC function = supports easy TIG welding XXPrecise setting of the correct welding parameters via digital display XXUniversally deployable for welding with all popular electrode types XXSuitable for use with generator, e.g., in company workshops, schools, metalworking, on building sites, or for agricultural applications XXTIG pulse supports welding with lower heat input XXHF high-frequency ignition ignites the arc in TIG welding without touching the workpiece XXThe low-noise fans capably dissipate heat from the devices thus ensuring a high duty cycle EASY-TIG 0 AC/DC PULSE The control system: MMA/LIFT/HF TIG selection switch AC/DC selection switch 3 TIG T/T mode selection switch Parameter selection and setting button TIG parameter setting 3 Mode Display / Data Display - Hot start - Welding current - Arc power

5 Model EASY-TIG 0 DC PULSE EASY-TIG 0 AC/DC PULSE Technical specifications Weldable electrode Ø.~.0 mm.~.0 mm Sheet thicknesses.0~8.0 mm.0~8.0 mm TIG DC setting range ~00 A 0~00 A Electrode setting range ~00 A 0~70 A Supply voltage 0/0 Hz Ph / 30 V±0% Ph / 30 V±0% Duty cycle at Imax. 0 C TIG DC 30 % 3% Duty cycle at Imax. 0 C electrode 30 % 0% Current at 00 % duty cycle 0 C TIG DC 0 A 0 A Current at 00 % DC 0 C electrode 0 A 0 A Pulse frequency 0.~00 Hz 0.~00 Hz Power draw.9/. kva 7.0/9. kva Dimensions (L x W x H) 30 x 0 x 80 mm 0 x 0 x 80 mm Net weight 7.8 kg 7 kg EN 097-:00-07/EN 097-0:008-0; all devices degree of protection IP3 Scope of supply EASY-TIG 0DC PULSE Gas hose m incl. quick connector Torch TIG m 3 m earth cable mm² with ground clamp 3 m welding cable mm² with electrode holder Scope of supply EASY-TIG 0 AC/DC PULSE Gas hose m incl. quick connector Torch TIG m 3 m earth cable mm² with ground clamp Set articles Mapping table for material type and material thickness Material Large ceramic gas tip Material thickness mm Tungsten electrode Ø mm Steel/ Stainless steel Aluminium (only with AC/DC) Copper/ Copper alloys EASY-TIG 0 DC PULSE SET 0700SET Consisting of: Gas hose m incl. quick connector, torch TIG m, VarioProtect XXL W welding helmet, 3 m ground cable mm² with ground clamp, 3 m welding cable mm² with electrode holder EASY-TIG 0 AC/DC PULSE SET 070SET Consisting of: Gas hose m incl. quick connector, torch TIG m, VarioProtect XXL W welding helmet, 3 m ground cable mm² with ground clamp Torch for TIG DC and AC/DC TIG with m Accessories for EASY-TIG 0 DC PULSE Wireless manual remote control 700 Up/down torch On request 3 Remote control torch On request Foot pedal, m 7009 Accessories for EASY-TIG 0 AC/DC PULSE On request Up/down torch On request 3 Remote control torch On request Foot pedal, m 7009 Welding current, Ampere Accessories 3 7 Electrode inverters Electrochemical processing MIG/MAG TIG inverters Welding accessories Plasma cutting equipment Multifunctional inverter

6 Inverter TIG welding devices New CRAFT-TIG 0 DC P PULSE portable TIG DC inverter for workshops and mobile use CRAFT-TIG 0 AC/DC P PULSE portable TIG AC/DC inverter for workshops and mobile use XXAll devices implemented with state-of-the-art inverter technology XXPerfectly suited for mobile work (on ladders, on scaffolding, etc.) and also generally suitable for outdoor work thanks to IP 3 degree of protection XXUniversally deployable for welding with all popular electrode types XXTIG pulse supports welding with lower heat input XXHF high-frequency ignition ignites the arc in TIG welding without touching the workpiece XXThe low-noise fans capably dissipate heat from the devices thus ensuring a high duty cycle XXSealed PC ensures protection against moisture, salt spray mist and corrosion Thus also suitable for offshore use XXPrecise setting of the correct welding parameters via digital display with job memory XXDevice equipped with PFC (power factor correction) for best possible use also when connected to cable drums Always the right wave for your task: Alternating current triangle wave welding output XXLower heat input with the same current setting. Particularly useful for welding thin metals Alternating current sinus wave welding output XXTraditional AC TIG welding wave form. Quieter "soft" arc characteristic 3 Alternating current square wave XXFocused arc for maximum penetration fast move speed and best possible directional control With pulse function 3 CRAFT-TIG 0 DC P PULSE CRAFT-TIG 0 AC/DC P PULSE The control system: Parameter selection and setting button Digital display multifunction display 3 Selection switch TIG HF, Lift Arc and MMA Selection switch gas or water-cooled TIG T/T mode selection switch 7 MMA Display 8 TIG parameter setting 3 8 Selection switch AC / DC 7 8

7 Technical specifications Weldable electrode Ø Sheet thicknesses TIG DC setting range Electrode setting range Supply voltage Duty cycle at Imax. 0 C TIG DC Duty cycle at Imax. 0 C electrode Current at 00 % duty cycle 0 C TIG DC Current at 00 % DC 0 C electrode Pulse frequency Power draw Dimensions (L x W x H) Net weight.~.0 mm.0~8.0 mm ~00 A ~00 A Ph / 30 V±0% 0 % 30 % A 3 A 0.~00 Hz 0.0/8.0 kva 30 x 0 x 80 mm 9 kg.~.0 mm.0~8.0 mm ~00 A ~00 A Ph / 90~7 V 0% 3% A 0 A 0.~00 Hz 7.0/.8 kva 80 x 90 x 30 mm kg MIG/MAG CRAFT-TIG 0 DC P PULSE CRAFT-TIG 0 AC/DC P PULSE Multifunctional inverter Model CRAFT-TIG 0 DC P PULSE EN 097-:00-07/EN 097-0:008-0; all devices degree of protection IP3 Gas hose m incl. quick connector Torch TIG m Pressure regulator 3 m earth cable mm² with ground clamp 3 m welding cable mm² with electrode holder Scope of supply CRAFT-TIG 0 AC/DC P PULSE Gas hose m incl. quick connector Torch TIG m Pressure regulator 3 m earth cable mm² with ground clamp TIG inverters Scope of supply CRAFT-TIG 0 DC P PULSE CRAFT-TIG 0 AC/DC P PULSE 070SET CRAFT-TIG 0 AC/DC P PULSE SET Consisting of: Gas hose m incl. quick connector, torch TIG m, pressure regulator VarioProtect XXL W welding helmet, 3 m ground cable mm² with ground clamp 070SET Torch for TIG DC and AC/DC Up/down torch Remote control torch 0 On request On request On request Accessories for CRAFT-TIG 0 AC/DC P Pulse 3 7 Carriage Water cooler 30 V l Wireless foot pedal remote control Wireless manual remote control Foot pedal, m Carriage with water cooler 30 V l Electrochemical processing TIG with m Water-cooled torches Plasma cutting equipment CRAFT-TIG 0 DC P PULSE SET Consisting of: Gas hose m incl. quick connector, torch TIG m, pressure regulator, VarioProtect XXL W welding helmet, 3 m ground cable mm² with electrode holder Electrode inverters Set articles 7 Wireless manual remote control Up/down torch Remote control torch Foot pedal, m On request On request Welding accessories Accessories for CRAFT-TIG 0 DC P Pulse

8 FINANCING THROUGH LEASING Leasing offers companies a number of advantages over purchase or credit financing. The most important aspects are: Tax benefits Leasing instalments are fully tax deductible as operating expenses if the leased object is assigned to the lessor for tax purposes. Balance sheet neutral Leasing objects do not appear in the lessee's balance sheet. Only the leasing instalments are recorded as operating expenses in the profit and loss account. The equity ratio and the debt ratio do not change. The lessor capitalises the leased asset as fixed assets or leased assets. (Off-balance-sheet financing) Calculation basis The leasing rate is not influenced by changes in interest rates or ratings, even in the long term, and thus serves as a reliable basis for calculation. Liquidity Since the leasing company is responsible for financing the object, the lessee has more financial leeway for future decisions. Additionally, dependency on banks is reduced. Pay as you earn considerations As the leasing instalments are due parallel to the use of the object, the leasing object more or less finances itself (effect/cost congruity). Financing costs are spread over the duration of use and thus also over the period in which income is generated from the object. Advance financing is thus avoided. Planning reliability The amount of the leasing instalments and contract term are fixed from the start. Individual contract design The individual contract design with regard to term, amortisation and payment flow, and method of payment makes it possible to adapt to different needs. Please ask us for your personal quotation! Talk to your retailer or request information by free of charge and without obligation at leasing@stma.de. 0

9 Professional inverter TIG welding systems Qualität Made in Germany

10 Inverters TIG welding devices digital Qualität Made in Germany HIGH-TIG / HIGH-TIG PLUS Ultra-compact high performance TIG inverter with state-of-art design and revolutionary control solution. TIG welding has never been so simple or safe! XXHigh-performance primary inverter technology XXState-of-the-art engineering guarantees perfect tacking and welding XXTotally easy to control thanks to unique, graphical, dynamic, high-res display XXBuilt for the daily grind: device survives drops from a height of up to 90 cm XXDust-protected electronics: cooling air ducting in special channel for optimal cooling and protection of the electronics against soiling XXThe lightest TIG welding system in its performance class with a weight of just 7. to 7.9 kg XXHuge feature scope included as standard XXUp to 30 Ampere from 30 Volt All 30 A systems XXprepare for quick connection of a liquidcooling system XXwork with PFC, thus enabling use on any type of power generator and global deployment thanks to multiple voltage XXwork safely with mains voltages of 00 to 0 V PLUS models with additional highlights: XXHyper pulse at 7,00 Hz XXDUAL.WAVE technology XXSpot function as of 0.0 seconds XXConfigurable ignition power XXFinal current adjustable XXStart-up current adjustable XXAC frequency adjustable XXTriangular or square wave form selectable XXWelding voltage display XXUp to 99 program memory slots The lightweight model among TIG systems! Revolutionary simple and safe operating solution! Classic display Fast and easy storing of four current welding tasks XXSelf-explanatory graphics show all settings at a glance. Relationships become transparent and understandable Assist - useful support XXMany years of experience in TIG welding are stored here. They can serve as useful practical tips for the welder, or be immediately applied as settings. This improves work safety and quality Dynamic graphical display Welding tips for everyone XXWelding parameter changes are displayed graphically XXIncorrect settings are immediately detected The display only shows settings that are actually active XXThe HIGH-TIG supports the user with comprehensive facts relating to the welding task the user faces. This improves both safety and quality Concentrated knowledge Fast and easy navigation in the respective application field. Four multifunctional selection switches XXA library ensures that setting up is child's play. This guarantees a fast and easy selection for both simple and complex welding tasks. Setup via selection of the basic material, the weld form and material thickness.

11 Qualität Made in Germany 80 AC/DC TIG setting range Duty cycle (DC) at Imax. (0 min.) at 0 C TIG Power supply/mains frequency Fuse Torch cooling Degree of protection Cos phi power factor Power consumption at Imax. Insulation class Welding cable socket Weight Dimensions (L x W x H) Standards 80 DC PLUS AC/DC 30 DC 30 AC/DC PLUS A 0% 30 DC PLUS AC/DC PLUS A 3% MIG/MAG 80 DC x 30 V 0/0 Hz A Gas/liquid IP 3 S 0.98.k VA kva F 3 mm 7. kg 80 x 0 x 30 mm EN 0 97-;-3;-0 / S mark / EMC - class A Multifunctional inverter Technical data HIGH-TIG Similar to image. Subject to technical changes. Additional equipment on the devices shown is available for a surcharge. Standards: S mark/en 097-; -0/EMC class A TIG inverters Drop tested up to 90 cm XXSafe thanks to floating electronics Electrode inverters Complete set in aluminium transport box Consisting of: Aluminium transport box, HIGH-TIG 80/30, ABITIG 00 9 m UD GRIP, ground cable mm², pressure regulator Argon/CO Plasma cutting equipment 0808SET 0809SET 0808SET 088SET 0803SET 080SET 0830SET 083SET Accessories Coolant RCL / l Remote control foot pedal Aluminium transport box TIG torch with 9-pin plug connector Gas-cooled up to max. 0A DC ABITIG 00 9 m UD GRIP HighFlex leather ABITIG m UD GRIP HighFlex leather Liquid-cooled up to max. 0A DC ABITIG 0W 9 m UD GRIP LITTLE HighFlex leather ABITIG 0W 9 8 m UD GRIP LITTLE HighFlex leather ABITIG 00 9 m UD GRIP HighFlex leather Optional equipment for HIGH-TIG 30 DC and AC/DC Water cooling unit 9990 Water cooling unit 3 Electrochemical processing Wear part set ABITIG 00 Wear part set ABITIG 0W Ground cable mm² m 3 mm with 00 A terminal Electrode cable mm² m 3 mm with 0 A bracket Pressure regulator Argon/CO² Gas hose. m Coolant RCL l Coolant RCL l Remote control foot pedal HIGH-TIG 80/30 Torch Duo cable 9-pole Adapter cable torch HIGH-TIG 70/0 to HIGH-TIG 80/30 liquid-cooled Adapter cable torch HIGH-TIG 70/0 to HIGH-TIG 80/30 gas-cooled Aluminium transport box for HIGH-TIG Welding accessories HIGH-TIG 80 DC Set HIGH-TIG 80 AC/DC HIGH-TIG PLUS 80 DC HIGH-TIG PLUS 80 AC/DC HIGH-TIG 30 DC HIGH-TIG 30 AC/DC HIGH-TIG PLUS 30 DC HIGH-TIG PLUS 30 AC/DC

12 Inverters TIG welding devices digital SSR 7 DD with potentiometer and leather, gas-cooled (for HIGH-TIG 0 DC/HIGH-TIG 70 DC) Qualität Made in Germany R-SR 7-0 DD with continuously variable potentiometer, water-cooled (for HIGH-TIG in connection with RWK 000) SSR 7 DD Potentiometer/ m 007 SSR 7 DD Poti/8 m 0078 No. Scope of supply Ergotig handle shell Leather Gas lens equipment set. mm R-SR 7-0/ m DD, potentiometer, liquid-cooled 700 R-SR 7-0/8 m DD, potentiometer, liquid-cooled 7008 No. Torch body SSR Short torch cap 000 Long torch cap Teflon seal for tip Clamping sleeve.0 mm Clamping sleeve. mm 00 0 Clamping sleeve. mm 00 0 Clamping sleeve 3. mm Clamping sleeve.0 mm Clamping sleeve housing.0 mm Clamping sleeve housing. mm 00 0 Clamping sleeve housing. mm 00 0 Clamping sleeve housing 3. mm Clamping sleeve housing.0 mm Gas tip Ø. mm Gas tip Ø 8.0 mm Gas tip Ø 9.8 mm Gas tip Ø. mm Gas tip Ø.7 mm Gas tip Ø.7 mm Gas tip Ø 9.0 mm Teflon seal for gas lens Gas lens.0 mm 0300 Gas lens. mm 030 Gas lens. mm 030 Gas lens 3. mm 0303 Gas lens.0 mm Gas tip for gas lens size ; Ø. mm Gas tip for gas lens size ; Ø 8.0 mm Gas tip for gas lens size ; Ø 9.8 mm Gas tip for gas lens size 7; Ø. mm Gas tip for gas lens size 8; Ø.7 mm Double pushbutton 000 Potentiometer 0k 00 Handle shell halves potentiometer 003 Wear part set SR Torch body R-SR Long torch cap 70 3 O-ring Teflon seal for gas lens 70 Clamping sleeve 0. mm 70 0 Clamping sleeve.0 mm 70 0 Clamping sleeve. mm 7 0 Clamping sleeve. mm 7 0 Clamping sleeve 3. mm 73 0 Gas lens 0. mm 730 Gas lens.0 mm 730 Gas lens. mm 73 Gas lens. mm 73 Gas lens 3. mm 733 a Clamping sleeve housing 0. mm 70 0 Clamping sleeve housing.0 mm 70 0 Clamping sleeve housing. mm 7 0 Clamping sleeve housing. mm 7 0 Clamping sleeve housing 3. mm a Gas tip size ; Ø.3 mm 30 0 Gas tip size ; Ø 8.0 mm 30 0 Gas tip size ; Ø 9. mm 30 0 Gas tip size 7; Ø.0 mm Gas tip size 8; Ø.8 mm Gas tip size 0; Ø.0 mm Gas tip for gas lens size ; Ø.3 mm 30 0 Gas tip for gas lens size ; Ø 8.0 mm 30 0 Gas tip for gas lens size ; Ø 9. mm 30 0 Gas tip for gas lens size 7; Ø.0 mm Gas tip for gas lens size 8; Ø.8 mm Printed circuit board cpl. with potentiometer 78 9 Handle shell cpl. with potentiometer 0k Ohm 77 0 Hose holder for rubber hose 73 Clamping part for rubber hose (potentiometer) 73 Specifications: SSR 7 DD Potentiometer Specifications: R-SR 7-0 Direct current DC: 0 A (3%) at 00% duty cycle AC: 0 A Alternating current AC: A (3%) at 00 % duty cycle DC 0 A Electrode Ø: mm Electrode Ø: mm Gas flow: - l/min Gas flow: - l/min *PU = Quantity in pieces per packaging unit Purchase only possible in PU

13 SSR 7-7 DD with potentiometer and leather, gas-cooled (for HIGH-TIG 0/70 DC Digital and HIGH-TIG 0/70 AC/DC Digital) SSR 7- DD with potentiometer and leather, gas-cooled (for HIGH-TIG 00/0 AC/DC Digital) 3 7 SSR 7-7 DD Potentiometer/ m 070 SSR 7-7 DD Poti/8 m 0780 No. Torch body SSR Short torch cap 000 Long torch cap Teflon seal for tip Clamping sleeve.0 mm Clamping sleeve. mm 00 0 Clamping sleeve. mm 00 0 Clamping sleeve 3. mm Clamping sleeve.0 mm Clamping sleeve housing.0 mm Clamping sleeve housing. mm 00 0 Clamping sleeve housing. mm 00 0 Clamping sleeve housing 3. mm Clamping sleeve housing.0 mm Gas tip Ø. mm Gas tip Ø 8.0 mm Gas tip Ø 9.8 mm Gas tip Ø. mm Gas tip Ø.7 mm Gas tip Ø.7 mm Gas tip Ø 9.0 mm Teflon seal for gas lens Gas lens.0 mm 0300 Gas lens. mm 030 Gas lens. mm 030 Gas lens 3. mm 0303 Gas lens.0 mm Gas tip for gas lens size ; Ø. mm Gas tip for gas lens size ; Ø 8.0 mm Gas tip for gas lens size ; Ø 9.8 mm Gas tip for gas lens size 7; Ø. mm Gas tip for gas lens size 8; Ø.7 mm Double pushbutton 000 Potentiometer 0k 00 Handle shell halves potentiometer 003 Wear part set SSR Specifications: SSR 7-7 DD Potentiometer Direct current DC: 0 A (3%) Alternating current AC: A (3%) Electrode Ø: mm Gas flow: - l/min *PU = Quantity in pieces per packaging unit Purchase only possible in PU Scope of supply Ergotig handle shell Leather Gas lens equipment set. mm 3 7 SSR 7- DD Potentiometer/ m 00 SSR 7- DD Potentiometer/8 m 080 No. Torch body SSR 000 Short torch cap 000 Long torch cap Teflon seal for tip Clamping sleeve.0 mm Clamping sleeve. mm 00 0 Clamping sleeve. mm 00 0 Clamping sleeve 3. mm Clamping sleeve.0 mm Clamping sleeve housing.0 mm Clamping sleeve housing. mm 00 0 Clamping sleeve housing. mm 00 0 Clamping sleeve housing 3. mm Clamping sleeve housing.0 mm Gas tip Ø. mm Gas tip Ø 8.0 mm Gas tip Ø 9.8 mm Gas tip Ø. mm Gas tip Ø.7 mm Gas tip Ø.7 mm Gas tip Ø 9.0 mm Teflon seal for gas lens Gas lens.0 mm 0300 Gas lens. mm 030 Gas lens. mm 030 Gas lens 3. mm 0303 Gas lens.0 mm Gas tip for gas lens size ; Ø. mm Gas tip for gas lens size ; Ø 8.0 mm Gas tip for gas lens size ; Ø 9.8 mm Gas tip for gas lens size 7; Ø. mm Gas tip for gas lens size 8; Ø.7 mm Double pushbutton 000 Potentiometer 0k 00 Handle shell halves potentiometer 003 Wear part set SSR Specifications: SSR 7- DD Potentiometer Direct current DC: 0 A (3%) Alternating current AC: 00 A (3%) Electrode Ø: mm Gas flow: - l/min Scope of supply Ergotig handle shell Leather Gas lens equipment set. mm Electrode inverters Electrochemical processing MIG/MAG TIG inverters Welding accessories Plasma cutting equipment Multifunctional inverter

14 Inverters TIG welding devices digital Qualität Made in Germany The HIGH-TIG AC/DC control concept: comprehensive functionality fast and easy-to-use Multifunctional head The large and clear-cut control panel is self-explanatory. A multifunctional button arranged at the centre provides fast and reliable access to the important welding parameter areas for the user. Program memory The HIGH-TIG AC/DC lets you save up to 99 programs. This saves time while also speeding up your work and guaranteeing reproducible welding results at any time. QUICK CHOICE buttons The QUICK CHOICE buttons P and P give you the ability to quickly and easily save two current settings for a welding task. You can access these welding programs simply by pressing one of the balance or by pressing the R-TIG Up/Down-button on the torch Digital display shows: 3 Welding method setting XXAmperes (A) XXTIG XXSeconds (S) XXElectrode welding XXFrequency (Hz) XXBalance (%) Electrode welding setting Multifunctional button for setting: XXGas pre-flow time XXIgnition energy Iz XXStart-up current Is XXWelding current XXArc force XXHot start XXCurrent ramp time tu Load/Save programs XXWelding current l XXLoad XXI pulse time t XXSave XXWelding current l XXI pulse time t XXCurrent reduction time td XXEnd crater current le QUICK CHOICE buttons XXP XXGas post-flow time XXP XXAC frequency Hz XXAC balance % 7 Indicator lights XXRemote control active XXOperation XXTemperature Setting -cycle/-cycle XX-cycle XX-cycle Setting high frequency ignition (HF) XXHF On XXHF Off Pulse setting XXPulse Off XXConventional pulse ( sec) XXHigh frequency pulse ( Hz) Polarity setting XXDirect current minus (DC) XXAlternating current AC: XXDirect current plus (DC) XXDUAL WAVE

15 HIGH-TIG 30 AC/DC Industrial design for up 0 l gas cylinders; chassis width extension, steering rollers and generously dimensioned fixed rollers. Features integrated liquid-cooling device. Electrochemical processing New Weld data monitoring - for logging and documenting the welding parameters current, voltage and arc time XXComputation of energy input per unit of length and heat input XXTransfer of the welding parameters and energy input per unit of length evaluation to a PC by means of a USB stick; analysis of the data and parameter characteristics on the device's internal viewer XXSingle user solution for parameter entry XXOption recording of cooling time t8/, pre-heating temperature and interpass temperatures XXOption recording of wire feed speed XXOption recording of gas flow volume XXDirect print-out of energy input per unit of length via optional printer Experience the device's unrivaled ease of handling and performance! In combination with the unbeatable price-performance ratio, there is no documentation system on the market that supports your welding jobs in an equally practice proven, inexpensive and precise way! If you have questions or required further information, please contact us at info@stuermer-maschinen.de 7 Welding accessories HIGH-TIG 80 AC/DC Industrial design for up 0 l gas cylinders; chassis width extension, steering rollers and generously dimensioned fixed rollers. Features integrated liquid-cooling device. Plasma cutting equipment Electrode inverters TIG inverters Integrated 00 W liquid cooling device with temperature monitoring, standby function, and plug and play for optimum communication between the cooling device and the HIGH-TIG AC/DC. Multifunctional inverter MIG/MAG Qualität Made in Germany

16 Inverters TIG welding devices digital HIGH-TIG AC/DC next generation TIG welding system. 30 Amperes at 00% duty cycle liquid-cooling integrated Qualität Made in Germany The HIGH-TIG AC/DC combined premium welding equipment technology with best-in-class userfriendliness. The unique combination of the Dual- Power inverter with the precise, digital welding process control offers perfect welding properties. Includes integrated torch liquid cooling as a factory standard. 00% duty cycle for all devices Maximum user-friendliness thanks to easy and safe handling XXClear-cut self-explanatory handling: easy and fast operation of the HIGH-TIG is no problem, even when wearing gloves! Perfectly stable arc XXFast and precise welding process control: the arc is kept stable in any position. Innovative ignition management guarantees reliable ignition. High frequency pulse up to 3000 Hz XXHigh-frequency pulse operation in a frequency range above 000 Hz ensures a precise, focused arc with a high output density. This ensures reliable and uniform penetration while at the same time reducing the heat impact zone. The higher arc pressure naturally supports faster welding speeds. The virtually unavoidable gap fluctuations between the torch and the weld pool in manual welding thus have virtually no influence on the welding results. Intelligent ignition management XXThanks to advanced processor control, the optimum ignition energy setting is chosen as a function of the selected welding current for both HF and Lift-Arc ignition. This quickly and easily produces a stable arc - independently of the tungsten electrode you are using - and is gentle on both the workpiece and the electrode. TIG AC welding XXThe AC arc remains smooth and stable even with critical and highly oxidised material surfaces. The quiet and appealing arc noise, is well below the legally required limit. Dual Wave Aluminium welding method XXThis custom mode is a combination of AC and DC welding. While welding the processor control automatically switches between 0. seconds of DC and then 0.3 seconds of AC welding current. The selected values for welding current I or I, the frequency and balance are taken into consideration, just like in DC- or AC-only welding. The Dual-Wave method means improved manageability of the weld pool and is used for welding difficult workpieces (out-of-position welding), when welding workpieces of different thicknesses and when processing thin sheet aluminium and aluminium alloys. AC Balance control XXAC Balance control controls the heat in the tungsten electrode. The arc can be focused based on the heat input, e.g., in welding thin sheets or for welded-on edges. Reducing the heat input also reduces the wear on the electrode. Automatic frequency control XXThe frequency is automatically adapted to match the current level in AC welding. The AC arc is focused at low welding currents. This ensures reliable root coverage, e.g., for fillet welds on thin sheets. The wear on the tungsten electrode is reduced at higher currents. The results are a long service life, and best-in-class economic efficiency. Automatic frequency control offers benefits, especially if you work with a remote control foot pedal. Additionally, the AC frequency can be manually configured in the range of Hz. Generator capability XXMore flexibility in mobile applications ELSA.PRO system XXThe proven ELSA (Electronic Stabilized Arc) technology was enhanced for PRO-TIG. This highly dynamic digital welding process, with its unique precision and precise reproducibility, ensures excellent welding properties even for melt pools with large surfaces. Electrode welding XXThe HIGH-TIG is also a full-fledged electrode welding device. In addition to the welding current, hot start and arc force are freely configurable. The electrode polarity is selectable on the device (no need to unplug and plug the welding and workpiece cables). Of course, the HIGH-TIG has the tried and trusted anti-stick function which prevents the stick electrode sticking and burning out. Optimised energy efficiency XXThe Dual-Power inverter has a uniquely effective mode of operation. Thanks to intelligent energy management, in combination with the use of innovative components, almost all of the supplied power is converted into an arc. As energy costs continue to rise, the HIGH-TIG also contributes to your economic success in terms of energy consumption. Process XXTIG XXElectrode welding XXRemotely controllable/programmable Sheet thicknesses XXfrom 0.3 mm Base materials XXNon alloy and low alloy materials XXHigh alloy materials XXStainless steels XXConstruction steels XXCrNi steels ferritic/austenitic XXDuplex steels XXAluminium XXNickel-based materials XXMagnesium materials XXCopper materials XXSpecial materials Typical applications XXPlant, container, machine, steel construction XXChemical plant construction XXAutomobile industry and automotive supplies XXPlant and pipeline construction XXConstruction site and mobile use 00 khz Dual-power inverter Up to 30 A at 00% duty cycle Plug&Play XXHIGH-TIG works with a smart CAN networked multiprocessor architecture. All components are automatically detected and configured by the HIGH-TIG. For the user this means: Plug & Play just plug in and start! Integrated torch liquid-cooling XXTorch cooling with a cooling performance of 00 W it is also activated by plug and play. Percent of fugal pump is requirements-driven (Auto/On/Off). Once the torch's schooling is sufficient, the liquid cooling system switches to standby (torch temperature monitoring). This reduces energy consumption and noise emission. A flow monitor is also integrated. 8 XControl X elements see page

17 Qualität Made in Germany Model HIGH-TIG 80 AC/DC HIGH-TIG 30 AC/DC Specifications: Continuously variable setting range 3-80 A 3-30 A Current at 00% DC 0 C TIG 80 A 30 A Current at 00% DC 0 C electrode 0 A 30 A Duty cycle at I max 0 C TIG 00 % 00 % Duty cycle at I max 0 C electrode 0 % 00 % Open circuit voltage 9 V 9 V Power connector 3 x 00 V 3 x 00 V Fuse A 3 A Degree of protection IP 3 IP 3 Torch cooling Water Water Premium set recommendation R-TIG 0 W/0 R-TIG 0 W/70 Weight 78. kg 8 kg Dimensions (L x W x H) 80 x 00 x 980 mm 80 x 00 x 980 mm Schweißkraft equipment has the S mark and complies with standard EN 0 97-; -0/EMC class A Torch-Sets HIGH-TIG AC/DC Torch set R-TIG 0 W/0 consisting of: R-TIG -0 W/8 m, earth cable m, pressure regulator Torch set R-TIG 0 W/70 consisting of: R-TIG -0 W/8 m, earth cable m, pressure regulator Torch HIGH-TIG AC/DC Wear part set Wear part set R-TIG -0 W consisting of: x sorting box large, x each clamping sleeve housing./3. mm, x clamping sleeve housing. mm, je x gas diffusor././3. mm, x isolator, x each gas nozzle 8.0/0.0/. mm, x short torch cap x medium torch cap, x long torch cap, x each tungsten electrode grey./3. mm, x tungsten electrode grey. mm Wear part set R-TIG -0 W consisting of: x sorting box large, x each clamping sleeve housing./.0 mm, x clamping sleeve housing 3. mm, je x gas diffusor./3./.0 mm, x isolator, x each gas nozzle 0.0/.0 mm, x gas nozzle 3.0 mm, x short torch cap, x long torch cap, x each tungsten electrode grey./.0 mm, x tungsten electrode grey 3. mm Accessories HIGH-TIG AC/DC 70 R-TIG -0 W/ m, Up/Down, Plug & Play R-TIG -0 W/8 m, Up/Down, Plug & Play 8 R-TIG -0 W/ m, Up/Down, Plug & Play R-TIG -0 W/ m, Up/Down, Plug & Play R-TIG -0 W/8 m, Up/Down, Plug & Play 8 R-TIG -0 W/ m, Up/Down, Plug & Play Earth cable 0 mm²/ m, complete with clamp 00 Earth cable 70 mm²/ m, complete with clamp 070 Earth cable 9 mm²/ m, complete with clamp 09 Pressure regulator with content and operation manometer, Argon/CO Remote control foot pedal, Plug & Play 00 Adapter cable 7 to pin. Torch for HIGH-TIG AC/DC, air/water without potentiometer 00 Adapter cable 7 to pin. Torch for HIGH-TIG AC/DC, air-cooled with potentiometer 00 Coolant BTC 0 litre can (pre-mixed) 0300 Coolant BTC 0 0 litre can (pre-mixed) 0300 Torch R-TIG with UP/DOWN function 9 Electrode inverters Electrochemical processing MIG/MAG TIG inverters Welding accessories Plasma cutting equipment Multifunctional inverter

18 Inverters TIG welding devices digital ABITIG 00 liquid-cooled for HIGH-TIG 80/30 R-TIG -0 W for HIGH-TIG 30 AC/DC R-TIG -0 W/ m, Up/Down, Plug & Play R-TIG -0 W/8 m, Up/Down, Plug & Play 8 R-TIG -0 W/ m, Up/Down, Plug & Play No. PQ. Electrode holder. mm 037 Electrode holder. mm 039 Electrode holder 3. mm 00.7 Gas diffusor.0 mm 09 Gas diffusor. mm 00 Gas diffusor. mm 0 Gas diffusor 3. mm 03.3 Insulator Gas tip. mm 0 0 Gas tip 8 mm 0 0 Gas tip 0 mm 03 0 Gas tip. mm 0 0. Short torch cap 03. Medium torch cap Long torch cap 03 Wear part set R-TIG -0 W R-TIG -0 W/ m, Up/Down, Plug & Play R-TIG -0 W/8 m, Up/Down, Plug & Play 8 R-TIG -0 W/ m, Up/Down, Plug & Play No. PQ. Electrode holder. mm 009 Electrode holder. mm 0 Electrode holder 3. mm 0 Electrode holder.0 mm 03 Electrode holder.8 mm 0.7 Gas diffusor. mm 0 Gas diffusor. mm 07 Gas diffusor 3. mm 08 Gas diffusor.0 mm 09 Gas diffusor.8 mm Insulator Gas tip 7. mm 0 0 Gas tip 0 mm 0 0 Gas tip 3 mm 07 0 Gas tip, reinforced 3 mm 08 0 Gas tip mm 09 0 Gas tip, reinforced mm Short torch cap 00. Long torch cap 007 Wear part set R-TIG -0 W Specifications: R-TIG 0 W Load: 80 A (DC) 0 A (DC) 9 A (AC) 8 A (AC) Duty cycle 0 % 00 % Electrode Ø:.0-3. mm Specifications: R-TIG 0 W Load: 0 A (DC) 00 A (DC) 300 A (AC) 80 A (AC) Duty cycle 0 % 00 % Electrode Ø:. -.8 mm *PU = Quantity in pieces per packaging unit Purchase only possible in PU 0