Amber PLCC4 Surface Mount LED with Domed Lens

Transcription

1 Amber PLCC4 Surface Mount LED with Domed Lens High intensity with low power consumption White PLCC4 package with clear domed lens Wide viewing angle Packaged in 8 mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Amber (591 nm) Product Photo Here The is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications Traffic lights Signal and symbol luminaire Mono-color indicators Backlighting (LCD, switches, displays, illuminated advertising) Interior automotive lighting (instrumentation clusters) Safety marker lights (steps, eit ways) Part Number Material Emitted Color Intensity Typ. mcd AlInGaP Amber 1800 Lens Color Water Clear 2.7 RoHS Moisture 1, 2, 3 CATHODE 4 ANODE DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK Technology Inc Wallace Drive, Carrollton, Teas Issue A.1 04/06 Page 1 of 4

2 Absolute Maimum Ratings T A = 25 o C unless otherwise noted Storage Temperature Range Operating Temperature Range Soldering Temperature 1 Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, PW VHF Power Dissipation -40 ~ +100 C -40 ~ +100 C 260 C 5 V mw Note: 1. Solder time less than 5 seconds at temperature etreme. Electrical Characteristics T A = 25 o C unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS I V Luminous Intensity mcd I F = 50 V F Forward Voltage V I F = 50 I R Reverse Current µa V R = 5 V D Dominant Wavelength nm I F = 50 P Peak Wavelength nm I F = 50 2 ½ 50% Power Angle deg I F = 50 Standard Bins (I F = 50 ) Lamps are sorted to luminous intensity (I V ) and dominant wavelength ( D ) bins shown. Orders for may be filled with any or all bins contained as below. Luminous Intensity (mcd) X XQ 1400 W W Dominant Wavelength ( D ) Luminous intensity is at W1 bin or above. Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. Issue A Page 2 of 4 OPTEK Technology Inc Wallace Drive, Carrollton, Teas 75006

3 Typical Electro-Optical Characteristics Curves V µa V Forward Current vs Forward Voltage Reverse Current vs Reverse Voltage Half Power WL = 20 nm Domi WL = 591 nm % % Relative Luminous Intensity vs Forward Current nm Relative Luminous Flu vs Wavelength 50% Power Angle: 120 C Maimum Forward DC Current vs Ambient Temperature Spatial Distribution OPTEK Technology Inc Wallace Drive, Carrollton, Teas Issue A.1 04/06 Page 3 of 4

4 Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded quantity 700 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label Issue A Page 4 of 4 OPTEK Technology Inc Wallace Drive, Carrollton, Teas 75006

5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Optek: