CURRICULUM VITAE (CV)

Transcription

1 بسم رلاهللا CURRICULUM VITAE (CV) Personal Details: Name: Ahmed Abdelkarim Yassin Abdelkarim Mobile: , Date and Place of Birth: September, , Saudi Arabia AlmadinaAlmonawara Marital Status: Single Male Nationality: Sudanese Address: Alarda south, Omdurman, Khartoum, Sudan Education : August 2015: Master degree (MSc.), University of Khartoum, Faculty of Engineering, Electrical and Electronic Engineering Department,Communication and Information System Master Program. August 2011: University certificate (B.Sc HON), University of Khartoum, Faculty of Engineering, Electrical and Electronic Engineering Department,Telecommunication Engineering. Work Experience: April Present:Lecturerat University of Khartoum, Faculty of engineering, Electrical and Electronic Engineering department, and Research Engineer at University of Khartoum Space research Center. January Present: Transmission Network Planning and Optimization Engineer at MTN Sudan (Full time) January April 2016: Research Engineer andnano-satellite System Engineer at University of Khartoum Space Project (Part time)

2 August 2011 January 2015: Research Engineer andnano-satellite System Engineerat University of KhartoumSpace Project (Full time). During the same period I worked as Ground Station Engineer at University of Khartoum Ground Station. January2012 January 2015: Part Time Teacher Assistant at University of Khartoum. Work Experiences Details: Transmission Network Planning and Optimization Engineer at MTN Sudan. ( MTN Group, formerly M-Cell is a South Africa-based multinational mobile telecommunication company, operating in many African, European and Asian countries ).My duties and responsibilities include the following: o Designing and planning of the transmission network across multiple transport platforms including Fiber optics, Microwave, VSAT, IP and Ethernet to fulfill business requirements. o Assist in microwave, fiber optics and VSAT site survey and validate the outputs. o Provide transmission network planning such as link design, microwave frequency planning, synchronization plan, technology and equipment assessment and selection. o Calculate microwave, fiber optics and VSAT link budget and ensure transmission quality standards. o Design transmission routes and upgrade microwave, fiber optics VSAT link capacity. o Monitor and evaluate transmission links performance and utilization and capacity upgrade. o Calculate and design GSM, WCDMA and LTE nodes transmission needs and optimize the network. o Leased line managing and control. o Transport and access network elements dimension based on requirements, business forecasts and operational trends includes theoretical studies, case studies for transmission network and perform urgent plans to meet the changes in network design. o Performing retuning & reconfiguration of microwave radio frequencies.

3 o Leading the transmission network developments &managing projects for new products & produce detailed reports & business case analysis. o Plan DCN for the network along with IP plan for each network element. o Conduct reports and handle transmission database (network design drawing, network information, Scope of works, Bill of quantities etc.) o Perform Ad-Hoc duties as assigned by management. o Design IP RAN network. Research Engineer andnano-satellite System Engineerin the Space project at University of Khartoum, Faculty of engineering, Electrical and Electronic Engineering department. (University of Khartoum is the largest and oldest university in Sudan. It has been recognized as a top university and a high-ranked academic university in Sudan ) My duties and responsibilities included the following: o Nano-satellite Communication Subsystem specialist and team leader. o Manage the team activities and provide the relevant reports. o Plan the technical activities and oversea the implementation as required. o Conduct research in the area of space and satellites. o Design, implement and test major subsystems of the Nano-satellite. o Integrate communication components with other subsystems. o Assign and plan the Nano-Satellite transmitter and receiver frequencies following the Nano-Satellite standards. o Setup and operate all devices related to Nano-Satellite communication subsystem in the Lab such as spectrum analyzer, frequency generator, frequency counter. Etc. o Conduct validation and verification tests against agreed requirements. o Preparation of training materials and the provision of training sessions at different levels. Ground Station Engineer, responsible for tracking and commanding of satellites and nano-satellites. In addition to that I was responsible for installation and maintenance of the University of Khartoum Ground Station and related antennas.

4 Part time Teacher Assistant in University of Khartoum, Faculty of Engineering,Electrical and Electronic Engineering Department. My responsibilities included supervision of tutorial and laboratory sessions for the following B. Sc subjects: o Satellite Communications Systems (5th Level). o Antennas and Wave Propagation (5th Level) o Digital Communication Systems (5th Level) o Fiber Optics Communications Systems (5th Level) o Digital Signal Processing (4th Level) o Digital System Design (3rd Level) o Mathematical Methods (2nd Level) o Electrical Circuits(2nd Level) Assistant supervisor for the final year graduation projects related to the Nano-satellite and space project in the department of Electrical and Electronic Engineeringat the University of Khartoum. Organizer and instructor for several workshops performed within the Nano-Satellite project in CubeSats, Nano-Satellite, Satellite s ground stations, communications and electronics design. Publications: - Nano-Satellite Communication Subsystem Design and Implementation: International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering 2015 (ICCNEEE2015), IEEE Sudan subsection,khartoum, Sudan, 7-9 September 2015.This paper published in IEEE Explore. - The Unscented Kalman Filter Applied to Satellite Orbit Determination: International Conference in Computing, Electronics and Electrical Engineering 2013 (ICCEEE2013), IEEE Sudan subsection, Khartoum, Sudan, August 2013.This paper published in IEEE Explore. - VHF Transmitter for Cubesats:2 nd IAA Conference on University Satellite Mission and Cubesat Workshop in Rome, Italy. In 3-9 February 2013.

5 - Satellite Tracking Software: 2nd IAA Conference on University Satellite Mission and Cubesat Workshop in Rome, Italy. In 3-9 February Courses: 1. idirect Operations & Maintenance (IOM)3.x of idirect VSAT Products, Dubai, UAE, 3/3/ VSAT training course, Sudatel Telecommunications Academy, Sudan, 26/11/ GSM / GPRS training course at Jelecom Training Centre (Technical Training Centre), Sudan, Courses at International Islamic University, Kuala Lumpur, Malaysia 2010 in: CDMA Networks and Satellite. PLC & SCADA Systems. PIC Microcontroller and Robotics. Power Distribution System. 5. Introduction to CCNA, University of Khartoum,two weeks, Fundamentals of Linux/ Unix Operating System, University of Khartoum, two weeks, Conferences and Workshops: University of Khartoum Space (Nano-satellite) project representative in: o ITU Center of Excellence Workshop on VSAT and Satellite Systems for Arab Countries, November 2013, Khartoum, Sudan. o University of Khartoum Engineering week, 2013, Khartoum, Sudan. o Forth African Telecommunication Minister Conference, 2-6 September 2012, Friendship Hall, Khartoum Sudan.

6 o University of Khartoum Annual Conference of Postgraduate Studies and Scientific Research, February 2012, Friendship Hall, Khartoum Sudan. Activities &Memberships: - Member ofnano-satelliteproject team, which aims to launch the first Sudanese satellite, University of Khartoum. - Member of a team which installs and operates the first educational ground-station in Sudan, University of Khartoum. - Member of a team that design, implement and test a fully functional nano-satellite prototype following the Cubesat standards. - Member of the engineer Sudanese council with number Participated as supervisor in Electrical & Electronic Engineering Student Exhibition (EEESE) Member of Team of Linux that participated at engineering week 2006, university of Khartoum. Training: 1. Training in National Electricity Corporation, about two weeks training, Training in Rosairis Dam Generation Unit, Rosairis, Sudan, Petrodar Petrol Company, Al-Elafone pumping station The 1 day visit involved: a. Communication. b. SCADA system. Technical Skills: Programs: AutoCAD, WorkBench, PSpice,Multisim circuit simulators,e-draw Max, Protues 7 ISIS circuit simulator and ARES PCB layout generator, Eagle (Printed Circuit Boards Design), Cvavr (Code Vision), Satellites Tracking softwares, Mixw (Signal reception

7 from satellites, decoding and analysis), Ericsson DCN, Huawei DCN, ZTE DCN, Pathloss. Programming languages: PASCAL,C/C++, Microsoft Visual C++, MATLAB. Computer: Excellent knowledge of Computer Applications (MS office, Windows). Personal skills: - Fast learning and good self-taught abilities. - Ability to work under any situations. - Good time management and strategicplanning. - Team and individual work spirit. - Supervisory skills. - Analytical Thinking. - Excellent presentation and reporting skills. Languages: Arabic Language (mother tongue). English (excellent:writing, reading, speaking and listening). Interests and Hobbies: - Reading, drawing. - Football, swimming. - Chess and solving puzzles. All supporting documents will be provided when required.