SENSOR INFORMATION. Downhole Processor Information. Directional Sensor Information. Gamma Ray Sensor Information. Resistivity Sensor Information

Transcription

1 7852

2 Max Tool Temp (degf) / Source Max Tool Temp (degf) Lead MWD Engineer Customer Representative 129 / PWD-M5 129 J. Litwinowicz M. Sepulvado 117 / PWD-M5 117 J. Litwinowicz R. Sepluvado 117 / PWD-M5 117 J. Litwinowicz R. Sepulvado 122 / PWD-M5 122 J. Litwinowicz R. Sepulvado 161 / PWD-M5 161 L. Lee D. Vidrine SENSOR INFORMATION Downhole Processor Information Tool Type Software Version Sub Serial Number Insert Serial Number Date and Time Initialized Date and Time Read ECMB SW Version HCIM Feb-10 10:20 13-Jan-10 01: HCIM Feb-10 22:16 13-Feb-10 20: HCIM Mar-10 07:18 19-Mar-10 22: HCIM Mar-10 16:42 25-Mar-10 00: HCIM Mar-10 10:35 30-Mar-10 12: Directional Sensor Information Tool Type Distance From Bit (ft) Software Version Sub Serial Number Sonde Serial Number Sensor ID Number Toolface Offset (deg) DM CP DM CP DM PCDC DM Gamma Ray Sensor Information Tool Type Distance From Bit (ft) Recorded Sample Period (sec) Software Version Sub Serial Number Insert/Sonde Serial Number AGR AGR AGR AGR AGR Resistivity Sensor Information Tool Type Distance From Bit (ft) Recorded Sample Period (sec) Software Version Sub Serial Number Receiver Insert Serial Number Transmitter Insert Serial Number Receiver Orientation EWR-M Down EWR-M Down EWR-M Down EWR-M Down EWR-M Down MWD Run Number Date run completed Rig Bit Number Bit Size (in) Tool Nominal OD (in) Log Start Depth (MD, ft) Log End Depth (MD, ft) Drill or Wipe Drill/Wipe Start Date and Time Drill/Wipe End Date and Time Min Inc Depth (MD, ft) Apr , , Drilling 02-Apr-10 05:00 04-Apr-10 18:02 17, WELL INFORMATION Apr , , Drilling 09-Apr-10 08:39 09-Apr-10 12:19 18,348.00

3 Max Inc Depth (MD, ft) Bit TFA(in2) / Bit Type Flow Rate (gpm) Max AV (fpm) / CV MWD Fluid Type Density (ppg) / Viscosity (spqt) Filtrate CL (ppm) ph / Fluid Loss (mptm) PV (cp) / YP (lhf2) % Solids / % Sand % Oil / Oil:Water Ratio Measured Temp (degf) Measured Temp (degf) Measured Temp (degf) Max Tool Temp (degf) / Source Max Tool Temp (degf) Lead MWD Engineer Customer Representative 17, / HC408XC / 215 Rheliant 14.3 / ,000 NA / NA 28 / / / 72:28 NA NA NA 187 / PWD-M5 187 L. Lee D. Vidrine 18, / HC408XC / 285 Rheliant 14 / 94 26,000 NA / / / / 73:27 NA NA NA 174 / PWD-M5 174 J. Litwinowicz M. Sepulvado SENSOR INFORMATION Tool Type Software Version Sub Serial Number Insert Serial Number Date and Time Initialized Date and Time Read ECMB SW Version Downhole Processor Information HCIM HCIM Apr-10 05:23 08-Apr-10 04:47 31-Mar-10 05:10 10-Apr-10 22: Tool Type Distance From Bit (ft) Software Version Sub Serial Number Sonde Serial Number Sensor ID Number Toolface Offset (deg) PCDC Directional Sensor Information PCDC Tool Type Distance From Bit (ft) Recorded Sample Period (sec) Software Version Sub Serial Number Insert/Sonde Serial Number Gamma Ray Sensor Information AGR AGR Tool Type Distance From Bit (ft) Recorded Sample Period (sec) Software Version Sub Serial Number Receiver Insert Serial Number Transmitter Insert Serial Number EWR-M Resistivity Sensor Information EWR-M

4 Receiver Orientation Down Down REMARKS 1. All depths are measured bit depths, referenced to the Driller's pipe tally unless specified otherwise. 2. Runs logging data was aquired from customer. 3. Runs 600, 800, 900 were not drilling runs. 4. Run 1100 is the beginning of BP in Casing lbpf from 5057' to 5321' in Casing 218lbpf from 5067' to 6217'. 5" log smoothing: Interval Distance:.5 ft Coercion Distance:.6 ft Gap Fill: 7 ft INSITE v MC252_001_ST00BP01_5MD_PHASE_ATTEN.emf MC252_001_ST00BP01_5MD_PHASE_ATTEN.cgm WARRANTY HALLIBURTON WILL USE ITS BEST EFFORTS TO FURNISH CUSTOMERS WITH ACCURATE INFORMATION AND INTERPRETATIONS THAT ARE PART OF, AND INCIDENT TO, THE SERVICES PROVIDED. HOWEVER, HALLIBURTON CANNOT AND DOES NOT WARRANT THE ACCURACY OR CORRECTNESS OF SUCH INFORMATION AND INTERPRETATIONS. UNDER NO CIRCUMSTANCES SHOULD ANY SUCH INFORMATION OR INTERPRETATION BE RELIED UPON AS THE SOLE BASIS FOR ANY DRILLING, COMPLETION, PRODUCTION, OR FINANCIAL DECISION OR ANY PROCEDURE INVOLVING ANY RISK TO THE SAFETY OF ANY DRILLING VENTURE, DRILLING RIG OR ITS CREW OR ANY OTHER THIRD PARTY. THE CUSTOMER HAS FULL RESPONSIBILITY FOR ALL DRILLING, COMPLETION AND PRODUCTION OPERATION. HALLIBURTON MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SERVICES RENDERED. IN NO EVENT WILL HALLIBURTON BE LIABLE FOR FAILURE TO OBTAIN ANY PARTICULAR RESULTS OR FOR ANY DAMAGES, INCLUDING, BUT NOT LIMITED TO, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OF ANY INFORMATION OR INTERPRETATION PROVIDED BY HALLIBURTON. 48 inch 2 MHz PS Res P40H, RH48P 0.2 ohm-m inch 2 MHz PS Res P34H, RH40P 0.2 ohm-m inch 2 MHz PS Res SFXE P28H, RH32P 0 hrs ohm-m 20 Gamma Ray 24 inch 2 MHz PS Res GR_ARC, AGR SFXG P22H, RH24P 0 api hrs ohm-m 20 Rate Of Penetration 16 inch 2 MHz PS Res ROP5, SROP P16H, RH16P 1000 feet per hr 0 MD 0.2 ohm-m inch 2 MHz AT Res A40H, RH48A 0.2 ohm-m inch 2 MHz AT Res A34H, RH40A 0.2 ohm-m inch 2 MHz AT Res A28H, RH32A 0.2 ohm-m inch 2 MHz AT Res A22H, RH24A 0.2 ohm-m inch 2 MHz AT Res A16H, RH16A 0.2 ohm-m

5 Jetting 36" Casing with 9" MWD Tools Drilling Riserless with Seawater GR_ARC ROP 5 SLB Phase Data RUN 100 SLB Atten Data " Casing 5321 MD / 5321' TVD

6

7

8

9 ROP SLB Phase Data SLB Atten Data GR_ARC

10 28" Casing 6217' MD / 6217' TVD Logging Rat Hole 6300 RUN 100 RUN

11

12

13 6900 GR_ARC 7000 SLB Atten Data ROP 5 SLB Phase Data

14

15

16

17 " Casing 7937' MD / 7937' TVD Logging Rat Hole

18 RUN 200 RUN 300 GR_ARC ROP SLB Phase Data SLB Atten Data RUN 300 RUN

19

20

21

22 " Casing 8969' MD / 8969' TVD GR_ARC ROP SLB Phase Data SLB Atten Data

23 RUN 400 RUN 500 RUN 500 RUN 700 EWR-M5 Phase EWR-M5 Atten AGR 9100 Begin Sperry LWD 9.5 " EWR-M5 Logging 20" hole in 11.1ppg mud SROP 9200

24

25

26

27 AGR SROP EWR-M5 Phase EWR-M5 Atten 10100

28

29

30

31 10900 AGR SROP EWR-M5 Phase EWR-M5 Atten

32

33

34 " Casing 11585' MD / 11585' TVD Begin Kick-Off for MD / TVD RUN 700 RUN

35

36 AGR SROP EWR-M5 Phase EWR-M5 Atten 12100

37

38

39

40 12900 AGR SROP EWR-M5 Phase EWR-M5 Atten

41 13100 Logging Inside Casing SFXE SFXG RUN 1100 RUN " Casing 13145' MD / 13134' TVD 13200

42

43

44

45 AGR SROP EWR-M5 Phase EWR-M5 Atten 14100

46

47

48

49 AGR SROP EWR-M5 Phase EWR-M5 Atten

50 Logging Inside Casing SFXE SFXG RUN 1200 RUN " Casing 15103' MD / 15092' TVD 15200

51

52

53

54 15900 AGR SROP EWR-M5 Phase EWR-M5 Atten 16100

55

56

57

58

59 AGR SROP EWR-M5 Phase EWR-M5 Atten SFXE SFXG Logging In Casing RUN 1300 RUN " Casing 17168' MD / 17157' TVD 17200

60

61

62 17700 SFXE SFXG 17800

63 17900 SROP AGR EWR-M5 Phase EWR-M5 Atten

64 RUN 1400 RUN

65 DIRECTIONAL SURVEY REPORT BP Exploration and Production OCS-G ST00BP01 Mississippi Canyon Blk. 252 Louisiana U.S.A/Offshore LA LA-MM Survyes from 5,067' to 8,917' were taken by Schulmberger ' MD is projected to bottom. SFXE EWR-M5 Phase EWR-M5 Atten AGR SFXG RUN 1500 SROP Well 18360' MD / ' TVD Rate Of Penetration ROP5, SROP MD 16 inch 2 MHz PS Res P16H, RH16P 1000 feet per hr ohm-m 20 Gamma Ray 24 inch 2 MHz PS Res GR_ARC, AGR SFXG P22H, RH24P 0 api hrs ohm-m inch 2 MHz PS Res SFXE P28H, RH32P 0 hrs ohm-m inch 2 MHz PS Res P34H, RH40P 0.2 ohm-m inch 2 MHz PS Res P40H, RH48P 0.2 ohm-m inch 2 MHz AT Res A16H, RH16A 0.2 ohm-m inch 2 MHz AT Res A22H, RH24A 0.2 ohm-m inch 2 MHz AT Res A28H, RH32A 0.2 ohm-m inch 2 MHz AT Res A34H, RH40A 0.2 ohm-m inch 2 MHz AT Res A40H, RH48A 0.2 ohm-m 20

66 Measured Vertical Vertical Depth Inclination Direction Depth Latitude Departure Section Dogleg (feet) (degrees) (degrees) (feet) (feet) (feet) (feet) (deg/100ft) N 0.00 E 0.00 TIE-IN S 7.70 E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E N E N E N E N E N E N E N E N E N E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S E S 0.38 W S W S W S W S W S W S W S W S W S W S W

67 S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W S W CALCULATION BASED ON MINIMUM CURVATURE METHOD SURVEY COORDINATES RELATIVE TO WELL SYSTEM REFERENCE POINT TVD VALUES GIVEN RELATIVE TO DRILLING MEASUREMENT POINT VERTICAL SECTION RELATIVE TO WELL HEAD VERTICAL SECTION IS COMPUTED ALONG A DIRECTION OF DEGREES (GRID) A TOTAL CORRECTION OF DEG FROM MAGNETIC NORTH TO GRID NORTH HAS BEEN APPLIED HORIZONTAL DISPLACEMENT IS RELATIVE TO THE WELL HEAD. HORIZONTAL DISPLACEMENT(CLOSURE) AT FEET IS FEET ALONG DEGREES (GRID) Date Printed:24 April 2010