County: Field: Run Number 1A. Schlumberger Depth ft. Depth Driller ft. Logging Date 02-Oct Bottom Log Interval 1492.

Transcription

1 Witnessed By NICK MALKEWICZ / DAN COLLINS Recorded By TIMOTHY ZOTARA Unit Number Location: 377 BRADFORD Logger on Bottom Time 02-Oct :46:48 Circulation Stopped Time Max Recorded Temperatures 60.8 degf BHT BHT Source RMF RMC Calculated Calculated Meas Temp Meas Temp NaN 68 degf Meas Temp degf Source of Sample Active Tank MUD Fluid Loss PH Density Viscosity 0.01 lbm/gal Type Fluid In Hole Air Bit Size 6.25 in Casing Schlumberger 20 ft Casing Driller Depth ft Top Log Interval ft Bottom Log Interval ft Schlumberger Depth ft Depth Driller ft Run Number 1A Logging Date 02-Oct-2013 County: Field: Location: Well: Company: ORANGETOWN NYACK API Serial No. Section: Township: Quadrangle Log Measured From: Ground Level 0.00 ft above Perm.Datum Drilling Measured From: Ground Level ROCKLAND WILDCAT LAT: TW #3 LAMONT DOHERTY EARTH OBSERVATORY Location: Permanent Datum: Ground Level Elev.: ft D.F ft LONG: G.L ft LAT: Elev. K.B. GAMMA RAY ARRAY INDUCTION PLATFORM EXPRESS County: ROCKLAND State: NEW YORK Field: WILDCAT Well: TW #3 Company: LAMONT DOHERTY EARTH OBSERVATORY THE USE OF AND RELIANCE UPON THIS RECORDED-DATA BY THE HEREIN NAMED COMPANY (AND ANY OF ITS AFFILIATES, PARTNERS, REPRESENTATIVES, AGENTS, CONSULTANTS AND EMPLOYEES) IS SUBJECT TO THE TERMS AND CONDITIONS AGREED UPON BETWEEN SCHLUMBERGER AND THE COMPANY, INCLUDING: (a) RESTRICTIONS ON USE OF THE RECORDED- DATA; (b) DISCLAIMERS AND WAIVERS OF WARRANTIES AND REPRESENTATIONS REGARDING COMPANY'S USE AND RELIANCE UPON THE RECORDED-DATA; AND (c) CUSTOMER'S FULL AND SOLE RESPONSIBILITY FOR ANY INFERENCE DRAWN OR DECISION MADE IN CONNECTION WITH THE USE OF THIS RECORDED-DATA. 1. Header 13.2 Software Version 2. Disclaimer 13.3 Composite Summary 3. Contents 13.4 Log ( STANDARD AIT 2IN ) 4. Well Sketch 13.5 Parameter Listing 5. Borehole Size/Casing/Tubing Record 14. 1A REPEAT PASS 5" 6. Operational Run Summary 14.1 Integration Summary 7. Borehole Fluids 14.2 Software Version 8. Remarks and Equipment Summary 14.3 Composite Summary 9. Depth Summary 14.4 Log ( STANDARD AIT 2IN ) 10. Survey Record 14.5 Parameter Listing 11. 1A MAIN PASS 1" 15. Calibration Report 11.1 Integration Summary 16. Tail 11.2 Software Version 11.3 Composite Summary 11.4 Log ( STANDARD AIT 2IN ) 11.5 Parameter Listing 12. 1A MAIN PASS 2"

2 12.1 Integration Summary 12.2 Software Version 12.3 Composite Summary 12.4 Log ( STANDARD AIT 2IN ) 12.5 Parameter Listing 13. 1A MAIN PASS 5" 13.1 Integration Summary

3 Bit Size ( in ) Top Driller ( ft ) 0 23 Top Logger ( ft ) 0 23 Bottom Driller ( ft ) Bottom Logger ( ft ) Size ( in ) 7 Weight ( lbm/ft ) Inner Diameter ( in ) Top Driller ( ft ) 0 Top Logger ( ft ) 0 Bottom Driller ( ft ) 23 Bottom Logger ( ft ) 20 Date Log Started 02-Oct-2013 Time Log Started 11:05:45 Date Log Finished 02-Oct-2013 Time Log Finished 13:04:42 Top Log Interval ( ft ) Bottom Log Interval ( ft ) Total Depth ( ft ) Max Hole Deviation ( deg ) 4.99 Azimuth of Max Deviation ( deg ) Bit Size ( in ) Logging Unit Number 377 Logging Unit Location Recorded By Witnessed By BRADFORD TIMOTHY ZOTARA NICK MALKEWICZ / DAN COLLINS

4 Service Order Number BXW Fluid Type Max Recorded Temperatures ( degf ) Source of Sample Zoned 60.8 Active Tank Salinity ( ppm ) 0 Density ( lbm/gal ) Zoned Funnel Viscosity ( s ) Fluid Loss ( cm3 ) PH Date/Time Circulation Stopped Date Logger on Bottom NaN 02-Oct-2013 Time Logger on Bottom 11:46:48 Source RMF RMC Meas Temp ( ohm.m@degf ) Meas Temp ( ohm.m@degf ) Meas Temp ( ohm.m@degf ) BHT ( ohm.m@degf ) BHT ( ohm.m@degf ) BHT ( ohm.m@degf ) Calculated Calculated N/A N/A N/A N/A N/A N/A Total Solid ( % ) High Gravity Solids ( % ) Fluid Type Fluid Type Density Density Gas - Air Water - Fresh Water Equip name Length MP name Offset LEH-QT LEH-Q T EDTC-B: EDTH-B:8586 EDTG-A EDTC -B:8592 CTEM ACCZ 0.00 HV 0.00 Gamma Ra y T elstatus A H APS-C: A: Remarks THANK YOU FOR CHOOSING SCHLUMBERGER TOOLS RUN AS PER TOOLSKETCH, W/ILE BOWSPRING ALL WELLSITE DATA AS PER SLB CARBON SERVICES REP TOOLS GL NO MUD SAMPLE AVAILABLE, 350', 8.4LBS/GAL FRESH WATER. PARAMETERS 350', WATER BEL NO MUD REPORT AVAILABLE, FRESH WATER WELL FLUID NOT CIRCULATED. HEADER SHOWS AIR HOLE, DUE TO TOP OF WELL, MW HEADER LIMITATION, NO SAMPLE TAKEN OF FLUID

5 APH-AC:66 APS-C:70 M NTR:50081 A H-190[2] Minitron Near Far APS MINTRON RUN TO NEAR SURFACE AIT-COMPUTE BOREHOLE SIZE AIT RUN W/O STANDOFFS MINTRON AUTO 50', SHUTDOWN SET TO 10' FLUID LEVEL 350', TENS / SONIC, PARAMETERS FD & FLUID TYPE ZONED MRT FROM EDTC CTEM MATRIX = SANDSTONE / MDEN = 2.65G/C3, SONIC MD = 55.5US/FT LOGS 1800'/HR APS POROSITY CHANNELS PRESENTED IN FLUID / AIR TOOLS RUN ECCENTERED W/ILE AH ILE-D A H-190[1] AIT-M: A M IS:275 AMRM:275 Induction 7.91 Power Sup 7.91 ply Temperat 7.91 ur e SP 0.08 Mud Resis 0.00 tivity Head Tens ion TO OL_ZERO Lengths are in ft Maximum O uter Diameter = in Line: Sensor Location, V alue: Gating O ffset A ll measurements are relativ e to TO O L_ZERO

6 Conveyance Type Log Sequence Wireline SUBSEQUENT LOG IN WELL Stretch Correction ( ft ) 1.00 Tool Zero Reference Check at Surface ( ft ) Reference Log Date Reference Log Name Aug-2010 USGS MFT Reference Log Run Number 4 Rig Type MAST Depth Remark 1 Depth Remark 2 Depth Remark 3 Depth Remark 4 Depth Remark 5 Depth Remark 6 ALL DEPTH CONTROL POLICIES FOLLOWED IDW USED AS PRIMARY DEPTH CONTROL DRUM COUNTER USED AS SECONDARY DEPTH CONTROL TOOLS GL RUN1A-C REFERENCED TO CLIENT REQUEST CORRELATION TO USGS LAS DATA, NOT LDP Type IDW-B Serial Number 6204 Calibration Date 27-JUN-2013 Calibrator Serial Number 33 Calibration Cable Type 7-39P-LXS Wheel Correction 1 1 Wheel Correction 2 0 Type CMTD-B/A Serial Number 2013 Calibration Date 03-SEP-2013 Calibrator Serial Number Calibration Points 10 Calibration RMS 7 Calibration Peak Error 16 Type 7-39P-LXS Serial Number Logging Cable Length ( ft ) Method : Minimum Radius of Curvature DLS Method : Lubinski North Reference : True North Total Correction Formula : Magnetic Dec Latitude : degrees Longitude : degrees Measured Depth: ft Inclination: 0.00 deg Azimuth: 0.00 deg True Vertical Depth: ft North Displacement: 0.00 ft East Displacement: 0.00 ft 9 : Manual 28 : Tie-In Point

7 0 : No correction 0 : Not Flagged Survey (ft) (deg) (deg) (ft) (ft) (ft) (ft) (ft) (ft) (deg) deg/100ft TIP GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F GPIT-F 9 0 0

8 GPIT-F MaxWell Application Patch SP AMIS Array Induction Sonde - M EDTC-B Enhanced Digital Telemetry Cartridge - B A Log[3]:Up Up ft ft 02-Oct :09:27 PM 02-Oct :00:37 PM ft true All depths are referenced to toolstring zero Description: Triple Combo standard resolution template for Platform Express Format: Log ( STANDARD AIT 2IN ) Index Scale: 1 in per 100 ft Index Unit: ft Index Type: Measured Depth Creation Date: 03-Oct :46:45 Channel Source Sampling AT10 AIT-M:AMIS:AMIS 3in AT20 AIT-M:AMIS:AMIS 3in AT30 AIT-M:AMIS:AMIS 3in AT60 AIT-M:AMIS:AMIS 3in AT90 AIT-M:AMIS:AMIS 3in CTEM EDTC-B:EDTC-B:EDTC-B 6in GR EDTC-B:EDTC-B:EDTC-B 6in SP AIT-M:AMIS:AMIS 6in TENS WLWorkflow 6in TIME_1900 WLWorkflow 0.1in TIME_ Time Marked every (s) GR > 200 GAPI GR > 400 GAPI Spontaneous Potential (SP) AIT-M -100 mv 100 Cable Tension (TENS) 6000 lbf 0 Gamma Ray (GR) EDTC-B 0 gapi 200 Cartridge Temperature (CTEM) EDTC-B 50 degf CD Array Induction Two Foot Resistivity A10 (AT10) AIT-M Array Induction Two Foot Resistivity A20 (AT20) AIT-M Array Induction Two Foot Resistivity A30 (AT30) AIT-M Array Induction Two Foot Resistivity A60 (AT60) AIT-M Array Induction Two Foot Resistivity A90 (AT90) AIT-M

9 FLEV CTEM 1000 AT90 GR 1050 AT60 TENS SP 1100 AT20 AT30

10 1150 AT FR CTEM FR SP FR GR GR > 200 GAPI GR > 400 GAPI FR TENS Spontaneous Potential (SP) AIT-M -100 mv 100 Cable Tension (TENS) 6000 lbf 0 Gamma Ray (GR) EDTC-B 0 gapi 200 Cartridge Temperature (CTEM) EDTC-B 50 degf 150 TIME_ Time Marked every (s) TD 1500 FR AT90 AT30 AT20 AT60 AT10 Array Induction Two Foot Resistivity A10 (AT10) AIT-M Array Induction Two Foot Resistivity A20 (AT20) AIT-M Array Induction Two Foot Resistivity A30 (AT30) AIT-M Array Induction Two Foot Resistivity A60 (AT60) AIT-M Array Induction Two Foot Resistivity A90 (AT90) AIT-M Description: Triple Combo standard resolution template for Platform Express Format: Log ( STANDARD AIT 2IN ) Index Scale: 1 in per 100 ft Index Unit: ft Index Type: Measured Depth Creation Date: 03-Oct :46:45 ABHM Array Induction Borehole Correction Mode AIT-M Compute Electrical Diameter ABLM Array Induction Basic Logs Mode AIT-M Normal ACDE Array Induction Casing Detection Enable AIT-M No ASTA Array Induction Tool Standoff AIT-M 0.12 in BARI Barite Mud Presence Flag Borehole No BHS Borehole Status (Open or Cased Hole) Borehole Open BHT Bottom Hole Temperature Borehole 60.8 degf BS Bit Size WLSESSION Depth Zoned in CBLO Casing Bottom (Logger) WLSESSION 20 ft CDEN Cement Density EDTC-B 2 g/cm3 DC_MODE Depth Correction Mode DepthCorrection Real-time DFD Drilling Fluid Density Borehole Depth Zoned lbm/gal EDF Elevation of Derrick Floor Above Permanent Datum WLSESSION 0 ft EPD Elevation of Permanent Datum (PDAT) above Mean Sea WLSESSION 380 ft Level GCSE_DOWN_PASS Generalized Caliper Selection for WL Log Down Passes Borehole BS GCSE_UP_PASS Generalized Caliper Selection for WL Log Up Passes Borehole BS

11 GGRD Geothermal Gradient Borehole degf/ft GRSE Generalized Mud Resistivity Selection, from Measured or Borehole REMS Computed Mud Resistivity GTSE Generalized Temperature Selection, from Measured or Borehole GTEM_LINEST Computed Temperature MST Mud Sample Temperature Borehole 68 degf PDAT Permanent Datum WLSESSION GL RMS Resistivity of Mud Sample Borehole 500 ohm.m SHT Surface Hole Temperature Borehole 68 degf SP_SHIFT SP Shift AIT-M 100 mv SPDR SP Drift Per Foot AIT-M 0 mv/ft TD Total Measured Depth Borehole 1500 ft Depth Zone Parameters BS 8.75 BS 6.25 DFD 0.01 DFD All depth are actual. MAX_LOG_SPEED Toolstring Maximum Logging Speed WLSESSION 1800 ft/h MaxWell Application Patch SP AMIS Array Induction Sonde - M EDTC-B Enhanced Digital Telemetry Cartridge - B A Log[3]:Up Up ft ft 02-Oct :09:27 PM 02-Oct :00:37 PM ft true All depths are referenced to toolstring zero Description: Triple Combo standard resolution template for Platform Express Format: Log ( STANDARD AIT 2IN ) Index Scale: 2 in per 100 ft Index Unit: ft Index Type: Measured Depth Creation Date: 03-Oct :46:48 Channel Source Sampling AT10 AIT-M:AMIS:AMIS 3in AT20 AIT-M:AMIS:AMIS 3in AT30 AIT-M:AMIS:AMIS 3in AT60 AIT-M:AMIS:AMIS 3in AT90 AIT-M:AMIS:AMIS 3in

12 CTEM EDTC-B:EDTC-B:EDTC-B 6in GR EDTC-B:EDTC-B:EDTC-B 6in SP AIT-M:AMIS:AMIS 6in TENS WLWorkflow 6in TIME_1900 WLWorkflow 0.1in TIME_ Time Marked every (s) GR > 200 GAPI GR > 400 GAPI Spontaneous Potential (SP) AIT-M -100 mv 100 Cable Tension (TENS) 6000 lbf 0 Gamma Ray (GR) EDTC-B 0 gapi 200 Cartridge Temperature (CTEM) EDTC-B 50 degf 150 Array Induction Two Foot Resistivity A10 (AT10) AIT-M Array Induction Two Foot Resistivity A20 (AT20) AIT-M Array Induction Two Foot Resistivity A30 (AT30) AIT-M Array Induction Two Foot Resistivity A60 (AT60) AIT-M Array Induction Two Foot Resistivity A90 (AT90) AIT-M 0 CD

13 FLEV CTEM 500 AT90 GR AT60 TENS 550 AT30 SP AT20 AT

14 CTEM 1100 AT90 GR AT60 TENS 1150 AT30 SP AT20 AT

15 TD Total Measured Depth Borehole 1500 ft FR CTEM FR GR 1450 FR SP FR TENS TD 1500 FR AT90 AT20 AT30 AT60 AT10 GR > 200 GAPI GR > 400 GAPI Spontaneous Potential (SP) AIT-M -100 mv 100 Cable Tension (TENS) 6000 lbf 0 Gamma Ray (GR) EDTC-B 0 gapi 200 Cartridge Temperature (CTEM) EDTC-B 50 degf 150 TIME_ Time Marked every (s) Array Induction Two Foot Resistivity A10 (AT10) AIT-M Array Induction Two Foot Resistivity A20 (AT20) AIT-M Array Induction Two Foot Resistivity A30 (AT30) AIT-M Array Induction Two Foot Resistivity A60 (AT60) AIT-M Array Induction Two Foot Resistivity A90 (AT90) AIT-M Description: Triple Combo standard resolution template for Platform Express Format: Log ( STANDARD AIT 2IN ) Index Scale: 2 in per 100 ft Index Unit: ft Index Type: Measured Depth Creation Date: 03-Oct :46:48 ABHM Array Induction Borehole Correction Mode AIT-M Compute Electrical Diameter ABLM Array Induction Basic Logs Mode AIT-M Normal ACDE Array Induction Casing Detection Enable AIT-M No ASTA Array Induction Tool Standoff AIT-M 0.12 in BARI Barite Mud Presence Flag Borehole No BHS Borehole Status (Open or Cased Hole) Borehole Open BHT Bottom Hole Temperature Borehole 60.8 degf BS Bit Size WLSESSION Depth Zoned in CBLO Casing Bottom (Logger) WLSESSION 20 ft CDEN Cement Density EDTC-B 2 g/cm3 DC_MODE Depth Correction Mode DepthCorrection Real-time DFD Drilling Fluid Density Borehole Depth Zoned lbm/gal EDF Elevation of Derrick Floor Above Permanent Datum WLSESSION 0 ft EPD Elevation of Permanent Datum (PDAT) above Mean Sea WLSESSION 380 ft Level GCSE_DOWN_PASS Generalized Caliper Selection for WL Log Down Passes Borehole BS GCSE_UP_PASS Generalized Caliper Selection for WL Log Up Passes Borehole BS GGRD Geothermal Gradient Borehole degf/ft GRSE Generalized Mud Resistivity Selection, from Measured or Borehole REMS Computed Mud Resistivity GTSE Generalized Temperature Selection, from Measured or Borehole GTEM_LINEST Computed Temperature MST Mud Sample Temperature Borehole 68 degf PDAT Permanent Datum WLSESSION GL RMS Resistivity of Mud Sample Borehole 500 ohm.m SHT Surface Hole Temperature Borehole 68 degf SP_SHIFT SP Shift AIT-M 100 mv SPDR SP Drift Per Foot AIT-M 0 mv/ft

16 Depth Zone Parameters BS 8.75 BS 6.25 DFD 0.01 DFD All depth are actual. MAX_LOG_SPEED Toolstring Maximum Logging Speed WLSESSION 1800 ft/h MaxWell Application Patch SP WAFE-SEC WAFE-FEC WAFE-TMDI Synergy SV451EC version 8.10 Synergy SV451EC version 9.10 Synergy SV451EC version 8.10 Synergy SV451EC version 9.10 Synergy SV451EC version Synergy SV451EC version AMIS Array Induction Sonde - M EDTC-B Enhanced Digital Telemetry Cartridge - B A Log[3]:Up Up ft ft 02-Oct :09:27 PM 02-Oct :00:37 PM ft true All depths are referenced to toolstring zero Description: Triple Combo standard resolution template for Platform Express Format: Log ( STANDARD AIT 2IN ) Index Scale: 5 in per 100 ft Index Unit: ft Index Type: Measured Depth Creation Date: 03-Oct :46:52 Channel Source Sampling AT10 AIT-M:AMIS:AMIS 3in AT20 AIT-M:AMIS:AMIS 3in AT30 AIT-M:AMIS:AMIS 3in AT60 AIT-M:AMIS:AMIS 3in AT90 AIT-M:AMIS:AMIS 3in CTEM EDTC-B:EDTC-B:EDTC-B 6in GR EDTC-B:EDTC-B:EDTC-B 6in SP AIT-M:AMIS:AMIS 6in TENS WLWorkflow 6in TIME_1900 WLWorkflow 0.1in TIME_ Time Marked every (s)

17 GR > 200 GAPI GR > 400 GAPI Spontaneous Potential (SP) AIT-M -100 mv 100 Cable Tension (TENS) 6000 lbf 0 Gamma Ray (GR) EDTC-B 0 gapi 200 Cartridge Temperature (CTEM) EDTC-B 50 degf 150 Array Induction Two Foot Resistivity A10 (AT10) AIT-M Array Induction Two Foot Resistivity A20 (AT20) AIT-M Array Induction Two Foot Resistivity A30 (AT30) AIT-M Array Induction Two Foot Resistivity A60 (AT60) AIT-M Array Induction Two Foot Resistivity A90 (AT90) AIT-M 0 10 CD

18 CTEM 200 AT90 GR 210 AT60 TENS 220 AT30 SP 230 AT20 AT FLEV

19 CTEM 440 AT90 GR 450 AT60 TENS 460 AT30 SP 470 AT20 AT

20 CTEM 680 AT90 GR 690 AT60 TENS 700 AT30 SP 710 AT20 AT

21 CTEM 920 AT90 GR 930 AT60 TENS 940 AT30 SP 950 AT10 AT

22 CTEM 1160 AT90 GR 1170 AT60 TENS 1180 AT30 SP AT20 AT

23 CTEM 1400 AT90 GR 1410 AT60 TENS SP AT30 AT20 AT10 FR CTEM FR GR

24 FR SP FR TENS TD 1500 FR AT90 AT30 AT20 AT60 AT10 GR > 200 GAPI GR > 400 GAPI Spontaneous Potential (SP) AIT-M -100 mv 100 Cable Tension (TENS) 6000 lbf 0 Gamma Ray (GR) EDTC-B 0 gapi 200 Cartridge Temperature (CTEM) EDTC-B 50 degf 150 TIME_ Time Marked every (s) Array Induction Two Foot Resistivity A10 (AT10) AIT-M Array Induction Two Foot Resistivity A20 (AT20) AIT-M Array Induction Two Foot Resistivity A30 (AT30) AIT-M Array Induction Two Foot Resistivity A60 (AT60) AIT-M Array Induction Two Foot Resistivity A90 (AT90) AIT-M Description: Triple Combo standard resolution template for Platform Express Format: Log ( STANDARD AIT 2IN ) Index Scale: 5 in per 100 ft Index Unit: ft Index Type: Measured Depth Creation Date: 03-Oct :46:52 AAPL Array Induction Answer Product Level(Depth Log/View only) AIT-M Radial ABHM Array Induction Borehole Correction Mode AIT-M Compute Electrical Diameter ABLM Array Induction Basic Logs Mode AIT-M Normal ACDE Array Induction Casing Detection Enable AIT-M No ACEN Array Induction Tool Centering Flag (in Borehole) AIT-M Eccentered AMRF Array Induction Mud Resistivity Factor AIT-M 1 ASTA Array Induction Tool Standoff AIT-M 0.12 in ATSE Array Induction Temperature Selection(Sonde Error AIT-M Internal Correction) AZ_ENABLE Z-Axis Acceleration Channel Enabled for Real-Time Depth DepthCorrection No Correction BARI Barite Mud Presence Flag Borehole No BHS Borehole Status (Open or Cased Hole) Borehole Open BHT Bottom Hole Temperature Borehole 60.8 degf BS Bit Size WLSESSION Depth Zoned in CBLO Casing Bottom (Logger) WLSESSION 20 ft CDEN Cement Density EDTC-B 2 g/cm3 DC_MODE Depth Correction Mode DepthCorrection Real-time DC_RT_ENABLE Depth Correction Real-Time Enabled DepthCorrection No DFD Drilling Fluid Density Borehole Depth Zoned lbm/gal EDF Elevation of Derrick Floor Above Permanent Datum WLSESSION 0 ft EPD Elevation of Permanent Datum (PDAT) above Mean Sea WLSESSION 380 ft Level GCSE_DOWN_PASS Generalized Caliper Selection for WL Log Down Passes Borehole BS GCSE_UP_PASS Generalized Caliper Selection for WL Log Up Passes Borehole BS GGRD Geothermal Gradient Borehole degf/ft GR_MULTIPLIER Gamma Ray Multiplier EDTC-B 1

25 Description: Triple Combo standard resolution template for Platform Express Format: Log ( STANDARD AIT 2IN ) Index Scale: 5 in per 100 ft Index Unit: ft Index Type: Measured Depth Creation Date: 03-Oct :46:56 Channel Source Sampling GRSE Generalized Mud Resistivity Selection, from Measured or Borehole REMS Computed Mud Resistivity GTSE Generalized Temperature Selection, from Measured or Borehole GTEM_LINEST Computed Temperature MST Mud Sample Temperature Borehole 68 degf PDAT Permanent Datum WLSESSION GL RMS Resistivity of Mud Sample Borehole 500 ohm.m SHT Surface Hole Temperature Borehole 68 degf SOCN Standoff Distance EDTC-B in SOCO Standoff Correction Option EDTC-B No SP_SHIFT SP Shift AIT-M 100 mv SPDR SP Drift Per Foot AIT-M 0 mv/ft TD Total Measured Depth Borehole 1500 ft TPOS Tool Position: Centered or Eccentered EDTC-B Eccentered Depth Zone Parameters BS 8.75 BS 6.25 DFD 0.01 DFD All depth are actual. MAX_LOG_SPEED Toolstring Maximum Logging Speed WLSESSION 1800 ft/h MaxWell Application Patch SP WAFE-SEC WAFE-FEC WAFE-TMDI Synergy SV451EC version 8.10 Synergy SV451EC version 9.10 Synergy SV451EC version 8.10 Synergy SV451EC version 9.10 Synergy SV451EC version Synergy SV451EC version AMIS Array Induction Sonde - M EDTC-B Enhanced Digital Telemetry Cartridge - B A Log[2]:Up Up ft ft 02-Oct :33:57 AM 02-Oct :58:11 AM ft true All depths are referenced to toolstring zero

26 AT10 AIT-M:AMIS:AMIS 3in AT20 AIT-M:AMIS:AMIS 3in AT30 AIT-M:AMIS:AMIS 3in AT60 AIT-M:AMIS:AMIS 3in AT90 AIT-M:AMIS:AMIS 3in CTEM EDTC-B:EDTC-B:EDTC-B 6in GR EDTC-B:EDTC-B:EDTC-B 6in SP AIT-M:AMIS:AMIS 6in TENS WLWorkflow 6in TIME_1900 WLWorkflow 0.1in TIME_ Time Marked every (s) GR > 200 GAPI GR > 400 GAPI Spontaneous Potential (SP) AIT-M -100 mv 100 Cable Tension (TENS) 6000 lbf 0 Gamma Ray (GR) EDTC-B 0 gapi 200 Cartridge Temperature (CTEM) EDTC-B 50 degf 150 Array Induction Two Foot Resistivity A10 (AT10) AIT-M Array Induction Two Foot Resistivity A20 (AT20) AIT-M Array Induction Two Foot Resistivity A30 (AT30) AIT-M Array Induction Two Foot Resistivity A60 (AT60) AIT-M Array Induction Two Foot Resistivity A90 (AT90) AIT-M

27 CTEM 920 AT90 GR 930 AT60 TENS 940 AT30 SP AT10 AT

28 CTEM 1160 AT90 GR 1170 AT60 TENS 1180 AT30 SP AT20 AT

29 CTEM 1400 AT90 GR 1410 AT60 TENS SP AT30 AT20 AT10 FR CTEM FR GR FR SP FR TENS 1490 TD 1500 FR AT30 AT90 AT60 AT20 AT10 GR > 200 GAPI GR > 400 GAPI Array Induction Two Foot Resistivity A10 (AT10) AIT-M

30 Spontaneous Potential (SP) AIT-M -100 mv 100 Cable Tension (TENS) 6000 lbf 0 Gamma Ray (GR) EDTC-B 0 gapi 200 Cartridge Temperature (CTEM) EDTC-B 50 degf 150 TIME_ Time Marked every (s) Array Induction Two Foot Resistivity A20 (AT20) AIT-M Array Induction Two Foot Resistivity A30 (AT30) AIT-M Array Induction Two Foot Resistivity A60 (AT60) AIT-M Array Induction Two Foot Resistivity A90 (AT90) AIT-M Description: Triple Combo standard resolution template for Platform Express Format: Log ( STANDARD AIT 2IN ) Index Scale: 5 in per 100 ft Index Unit: ft Index Type: Measured Depth Creation Date: 03-Oct :46:56 AAPL Array Induction Answer Product Level(Depth Log/View only) AIT-M Radial ABHM Array Induction Borehole Correction Mode AIT-M Compute Electrical Diameter ABLM Array Induction Basic Logs Mode AIT-M Normal ACDE Array Induction Casing Detection Enable AIT-M No ACEN Array Induction Tool Centering Flag (in Borehole) AIT-M Eccentered AMRF Array Induction Mud Resistivity Factor AIT-M 1 ASTA Array Induction Tool Standoff AIT-M 0.12 in ATSE Array Induction Temperature Selection(Sonde Error AIT-M Internal Correction) AZ_ENABLE Z-Axis Acceleration Channel Enabled for Real-Time Depth DepthCorrection No Correction BARI Barite Mud Presence Flag Borehole No BHS Borehole Status (Open or Cased Hole) Borehole Open BHT Bottom Hole Temperature Borehole 60.8 degf BS Bit Size WLSESSION 6.25 in CBLO Casing Bottom (Logger) WLSESSION 20 ft CDEN Cement Density EDTC-B 2 g/cm3 DC_MODE Depth Correction Mode DepthCorrection Real-time DC_RT_ENABLE Depth Correction Real-Time Enabled DepthCorrection No DFD Drilling Fluid Density Borehole 8.4 lbm/gal EDF Elevation of Derrick Floor Above Permanent Datum WLSESSION 0 ft EPD Elevation of Permanent Datum (PDAT) above Mean Sea WLSESSION 380 ft Level GCSE_DOWN_PASS Generalized Caliper Selection for WL Log Down Passes Borehole BS GCSE_UP_PASS Generalized Caliper Selection for WL Log Up Passes Borehole BS GGRD Geothermal Gradient Borehole degf/ft GR_MULTIPLIER Gamma Ray Multiplier EDTC-B 1 GRSE Generalized Mud Resistivity Selection, from Measured or Borehole REMS Computed Mud Resistivity GTSE Generalized Temperature Selection, from Measured or Borehole GTEM_LINEST Computed Temperature MST Mud Sample Temperature Borehole 68 degf PDAT Permanent Datum WLSESSION GL RMS Resistivity of Mud Sample Borehole 500 ohm.m SHT Surface Hole Temperature Borehole 68 degf SOCN Standoff Distance EDTC-B in SOCO Standoff Correction Option EDTC-B No SP_SHIFT SP Shift AIT-M 100 mv SPDR SP Drift Per Foot AIT-M 0 mv/ft

31 TD Total Measured Depth Borehole 1500 ft TPOS Tool Position: Centered or Eccentered EDTC-B Eccentered MAX_LOG_SPEED Toolstring Maximum Logging Speed WLSESSION 1800 ft/h Array Induction Sonde - M AMIS 275 AITM Rm/SP Bottom Nose AMRM 275 Master (EEPROM): 10:28:41 24-Sep-2013 Test Loop Gain - 0 Master Test Loop Phase - 0 deg Master Test Loop Gain - 1 Master Test Loop Phase - 1 deg Master Test Loop Gain - 2 Master Test Loop Phase - 2 deg Master Test Loop Gain - 3 Master Test Loop Phase - 3 deg Master Test Loop Gain - 4 Master Test Loop Phase - 4 deg Master Test Loop Gain - 5 Master Test Loop Phase - 5 deg Master Test Loop Gain - 6 Master Test Loop Phase - 6 deg Master Test Loop Gain - 7 Master Test Loop Phase - 7 deg Master Master (EEPROM): 10:28:41 24-Sep-2013 Sonde Error Correction Real - 0 ms/m Master Sonde Error Correction Quad - 0 Master Sonde Error Correction Real - 1 ms/m Master Sonde Error Correction Quad - 1 Master Sonde Error Correction Real - 2 ms/m Master Sonde Error Correction Quad - 2 Master Sonde Error Correction Real - 3 ms/m Master Sonde Error Correction Quad - 3 Master Sonde Error Correction Real - 4 ms/m Master Sonde Error Correction Quad - 4 Master Sonde Error Correction Real - 5 ms/m Master Sonde Error Correction Quad - 5 Master Sonde Error Correction Real - 6 ms/m Master Sonde Error Correction Quad - 6 Master Sonde Error Correction Real - 7 ms/m Master Sonde Error Correction Quad - 7 Master Master (EEPROM): 10:28:41 24-Sep-2013 Coarse Gain Master Fine Gain Master Master (EEPROM): 10:28:41 24-Sep-2013 Before (Measured): 11:11:17 02-Oct-2013 After: Thru Cal Mag - 0 V Master Before

32 Before-Master Thru Cal Phase - 0 deg Master Before Before-Master Thru Cal Mag - 1 V Master Before Before-Master Thru Cal Phase - 1 deg Master Before Before-Master Thru Cal Mag - 2 V Master Before Before-Master Thru Cal Phase - 2 deg Master Before Before-Master Thru Cal Mag - 3 V Master Before Before-Master Thru Cal Phase - 3 deg Master Before Before-Master Thru Cal Mag - 4 V Master Before Before-Master Thru Cal Phase - 4 deg Master Before Before-Master Thru Cal Mag - 5 V Master Before Before-Master Thru Cal Phase - 5 deg Master Before Before-Master Thru Cal Mag - 6 V Master Before Before-Master Thru Cal Phase - 6 deg Master Before Before-Master

33 Thru Cal Mag - 7 V Master Before Before-Master Thru Cal Phase - 7 deg Master Before Before-Master SPA Zero mv Master Before Before-Master SPA Plus mv Master Before Before-Master Temperature Zero V Master Before Before-Master Temperature Plus V Master Before Before-Master Accelerator Porosity Sonde element - Version C APS-C 70 Minitron MNTR Master (EEPROM): 16:53:42 23-Aug-2013 Minitron Beam Current Set Point ua Master Master (EEPROM): 16:53:42 23-Aug-2013 Near HV - Plateau Setting V Master Far HV Plateau Setting V Master Array HV - Plateau Setting V Master Master (EEPROM): 16:53:42 23-Aug-2013 Near Far Calibration Ratio - Master Near Array Calibration Ratio - Master Near Far Calibration Ratio Up/Down Ratio - Master Near Array Calibration Ratio Up/Down Ratio - Master Master (EEPROM): 16:53:42 23-Aug-2013 Array 1 Porosity Down Measurement ft3/ft3 Master Array 2 Porosity Down Measurement ft3/ft3 Master Average Slowing Down Time us Master Array 1 Slowing Down Time Up/Down Ratio - Master Array 2 Slowing Down Time Up/Down Ratio - Master

34 Master (EEPROM): 16:53:42 23-Aug-2013 Sigma Down Measurement cu Master Master (EEPROM): 16:53:42 23-Aug-2013 Before (Measured): 20:04:36 30-Sep-2013 After: Near Detector Count Rate 1/s Master Before Before-Master Far Detector Count Rate 1/s Master Before Before-Master Array-1 Detector Count Rate 1/s Master Before Before-Master Array-2 Detector Count Rate 1/s Master Before Before-Master Thermal Detector Count Rate ua Master Before Before-Master Enhanced Digital Telemetry Cartridge - B EDTC-B 8592 Plus Reference (Jig minus background reference) 165 Before (Measured): 11:10:42 02-Oct-2013 AZ Vertical Measurement ft/s2 Before Master (EEPROM): 11:06:26 02-Oct-2013 Initial PMT HV V Master Accelerometer Serial Number Master 660 Accelerometer Coefficients - 0 Master Accelerometer Coefficients - 1 Master Accelerometer Coefficients - 2 Master Accelerometer Coefficients - 3 Master Accelerometer Coefficients - 4 Master Accelerometer Coefficients - 5 Master Accelerometer Coefficients - 6 Master Accelerometer Coefficients - 7 Master Accelerometer Coefficients - 8 Master Accelerometer Coefficients - 9 Master Accelerometer Coefficients - 10 Master Accelerometer Coefficients - 11 Master Gamma-Ray Detector Serial Number Master 7755 Before (Measured): 17:25:33 25-Nov-2013 After:

35 Gamma Ray Gain Before Before (Measured): 17:25:33 25-Nov-2013 After: RGR Zero Measurement gapi Before RGR Plus Measurement gapi Before After Logging Equipment Head - QT, 3-3/8 inch 31 pin HPHT with Tension Sensor LEH-QT Master: HTEN Shop Gain Master HTEN Shop Offset lbf Master Before: RHTE Zero Measurement - 0 lbf Before RHTE Plus Measurement - 0 lbf Before HTEN Gain - 0 Before HTEN Offset - 0 lbf Before Company: LAMONT DOHERTY EARTH OBSERVATORY Well: TW #3 Field: County: State: WILDCAT ROCKLAND NEW YORK PLATFORM EXPRESS ARRAY INDUCTION GAMMA RAY