Depth - Driller COMPANY ANADARKO PETROLEUM WELL BIRD 21-1 FIELD COUNTY. , 0.0 ft above perm. Datum. Elev.: K.B ft ft.

Size: px

Start display at page:

Download "Depth - Driller COMPANY ANADARKO PETROLEUM WELL BIRD 21-1 FIELD COUNTY. , 0.0 ft above perm. Datum. Elev.: K.B ft ft."

Lindsay Armstrong
5 years ago
Views:

1 Witnessed By Recorded By Equipment Location Max. Rec. Temperature Time on Bottom Time Since Circulation BHT Source Rmf Rmc Meas. Temperature Meas. Temperature Meas. Temperature Source of Sample PH Fluid Loss Density Viscosity Type Fluid in Hole Bit Size Casing - Logger Casing - Driller Top - Logged Interval Bottom - Logged Interval Depth - Logger Depth - Driller Run No. Date Drilling measured from Log measured from Permanent Datum COMPANY ANADARKO PETROLEUM WELL BIRD 21-1 FIELD ARROYO COUNTY STANTON STATE KANSAS ARRAY COMPENSATED INDUCTION LOG COMPANY ANADARKO PETROLEUM WELL BIRD 21-1 FIELD ARROYO COUNTY STANTON STATE KANSAS API No Location 2180' FNL & 330' FWL Other Services: IDT/ICT WSST SDLT/DSNT/ML Sect. 21 Twp. 29S Rge. 41W GL GL GL Elev ft, 0.0 ft above perm. Datum Elev.: K.B. D.F. G.L. 04-Mar ft ft ft in WATER 8.9 ppg s/qt 8.50 ph FLOWLINE 6.8 cptm degf hr 05-Mar-11 00: ft T. HARRIS A. ALAMANZA ft ft ft Fold here Service Ticket No.: API Serial No.: PGM Version: WL INSITE R3.2.1 (Build 7) CHANGE IN MUD TYPE OR ADDITIONAL SAMPLE RESISTIVITY SCALE CHANGES Date Sample No. Type Log Depth Scale Up Hole Scale Down Hole Depth-Driller Type Fluid in Hole Density Viscosity Ph Fluid Loss Source of Sample RESISTIVITY EQUIPMENT DATA Run No. Tool Type & No. Pad Type Tool Pos. Other ONE ACRT NA 1.5" S.O. NA ONE MICROLOG SLIM ADJ. NA Source Rmf Rmc BHT @ BHT EQUIPMENT DATA GAMMA ACOUSTIC DENSITY NEUTRON Run No. ONE Run No. ONE Run No. ONE Run No. ONE Serial No Serial No Serial No. I15M94P17 Serial No Model No. GTET Model No. WSST Model No. SDLT Model No. DSNT Diameter 3.625" No. of Cent. 2 Diameter 4.75" Diameter 3.625" Detector Model No. 102-A Spacing 1' Log Type GAM-GAM Log Type NEU-NEU Type SCINT. Source Type Cs137 Source Type Am241Be Length 8" LSA [Y/N] Y Serial No B Serial No. 382 Distance to Source 9.4' FWDA [Y/N ] Y Strength 1.5Ci Strength 15Ci LOGGING DATA

2 GENERAL GAMMA ACOUSTIC DENSITY NEUTRON Run Depth Speed Scale Scale Scale Scale Matrix Matrix Matrix No. From To ft/min L R L R L R L R ONE TD CSG REC % -10% % -10% LIME DIRECTIONAL INFORMATION Maximum Remarks: ACRt, WSST,IDT,ICT,SDLT/DSNT/ML AND GAMMA ALL RAN IN COMBINATION; THIS IS THE FIRST RUN IN WELL. ANNULAR HOLE VOLUME CALCULATED FOR 5.5" CASING. CHLORIDES: 1500 ppm LCM: 16 lbs/bbl TOOLS ZEROED AT GROUND LEVEL PER CLIENT REQUEST. CREW: PRINCE, WOOD THANK YOU FOR USING HALLIBURTON ENERGY SERVICES HALLIBURTON DOES NOT GUARANTEE THE ACCURACY OF ANY INTERPRETATION OF THE LOG DATA, CONVERSION OF LOG DATA TO PHYSICAL ROCK PARAMETERS OR RECOMMENDATIONS WHICH MAY BE GIVEN BY HALLIBURTON PERSONNEL OR WHICH APPEAR ON THE LOG OR IN ANY OTHER FORM. ANY USER OF SUCH DATA, INTERPRETATIONS, CONVERSIONS, OR RECOMMENDATIONS AGREES THAT HALLIBURTON IS NOT RESPONSIBLE EXCEPT WHERE DUE TO GROSS NEGLIGENCE OR WILLFUL MISCONDUCT, FOR ANY LOSS, DAMAGES, OR EXPENSES RESULTING FROM THE USE THEREOF. HALLIBURTON Plot Time: 05-Mar-11 06:18:55 Plot Range: 1495 ft to ft Data: {ActiveWell}\Well Based\DAQ Current\ Plot File: \\-LOCAL-\BIRD_21_1\0001 MIXED_QUAD_WSST_ICT_IDT\ACRT\1_ACRT_2inx 2 INCH MAIN LOG 1K 90in Conductivity 2ft Res 0 mmho per metre SP -] 20mV [+ 0 20in Resistivity 2ft Res 50 ohm-metre 0 Gamma API : in Resistivity 2ft Res 50 api ft ohm-metre

3 1700 SP

4 SP

5 SP

6 SP

7 SP

8 SP

9 SP

10 FRSP Gamma API : in Resistivity 2ft Res 50 api ft ohm-metre SP -] 20mV [+ 0 20in Resistivity 2ft Res 50 ohm-metre 1K 90in Conductivity 2ft Res 0 mmho per metre Plot Time: 05-Mar-11 06:19:11 Plot Range: 1495 ft to ft Data: {ActiveWell}\Well Based\DAQ Current\ Plot File: \\-LOCAL-\BIRD_21_1\0001 MIXED_QUAD_WSST_ICT_IDT\ACRT\1_ACRT_2inx 2 INCH MAIN LOG

11 Plot Time: 05-Mar-11 06:19:11 Plot Range: 1598 ft to ft Data: {ActiveWell}\Well Based\DAQ Current\ Plot File: \\-LOCAL-\BIRD_21_1\0001 MIXED_QUAD_WSST_ICT_IDT\ACRT\1_ACRT_5_mainx 5 INCH MAIN LOG in Resistivity 2ft Res 2000 ohmm in Resistivity 2ft Res 2000 ohmm SP -] 20 mv [+ Tension Pull in Resistivity 2ft Res 2000 ohm-metre 0 Gamma API : K Tension 0 api ft pounds

30 Gamma API : K Tension 0 api ft pounds SP Tension Pull in Resistivity 2ft Res 2000

31 -] 20 mv [+ ohm-metre in Resistivity 2ft Res 2000 ohmm in Resistivity 2ft Res 2000 ohmm Plot Time: 05-Mar-11 06:19:26 Plot Range: 1598 ft to ft Data: {ActiveWell}\Well Based\DAQ Current\ Plot File: \\-LOCAL-\BIRD_21_1\0001 MIXED_QUAD_WSST_ICT_IDT\ACRT\1_ACRT_5_mainx 5 INCH MAIN LOG Plot Time: 05-Mar-11 06:19:27 Plot Range: 5198 ft to ft Data: BIRD_21_1\Well Based\DAQ \ Plot File: \\-LOCAL-\BIRD_21_1\0001 MIXED_QUAD_WSST_ICT_IDT\ACRT\1_ACRT_5_rptx REPEAT SECTION in Resistivity 2ft Res 2000 ohmm in Resistivity 2ft Res 2000 ohmm SP -] 20mV [+ Tension Pull in Resistivity 2ft Res 2000 ohm-metre 0 Gamma API : K Tension 0 api ft pounds 5200

34 Gamma API : K Tension 0 api ft pounds SP -] 20mV [+ Tension Pull in Resistivity 2ft Res 2000 ohm-metre in Resistivity 2ft Res 2000 ohmm in Resistivity 2ft Res 2000 Plot Time: 05-Mar-11 06:19:34 Plot Range: 5198 ft to ft Data: BIRD_21_1\Well Based\DAQ \ ohmm

35 Plot File: \\-LOCAL-\BIRD_21_1\0001 MIXED_QUAD_WSST_ICT_IDT\ACRT\1_ACRT_5_rptx REPEAT SECTION PARAMETERS REPORT Depth (ft) TOP Tool Name Mnemonic Description Value Units SHARED BS Bit Size in SHARED UBS Use Bit Size instead of Caliper for all applications. No SHARED MDBS Mud Base Water SHARED MDWT Borehole Fluid Weight ppg SHARED WAGT Weighting Agent Barite SHARED BSAL Borehole salinity 0.00 ppm SHARED FSAL Formation Salinity NaCl ppm SHARED KPCT Percent K in Mud by Weight? 0.00 % SHARED RMUD Mud Resistivity ohmm SHARED TRM Temperature of Mud 75.0 degf SHARED CSD Logging Interval is Cased? No SHARED ICOD AHV Casing OD in SHARED ST Surface Temperature 45.0 degf SHARED TD Total Well Depth ft SHARED BHT Bottom Hole Temperature degf SHARED SVTM Navigation and Survey Master Tool IDT SHARED AZTM High Res Z Accelerometer Master Tool IDT SHARED TEMM Temperature Master Tool NONE SHARED BHSM Borehole Size Master Tool NONE Rwa / CrossPlot Rwa / CrossPlot Rwa / CrossPlot Rwa / CrossPlot Rwa / CrossPlot Rwa / CrossPlot Rwa / CrossPlot Rwa / CrossPlot XPOK Process Crossplot? Yes FCHO Select Source of F Automatic AFAC Archie A factor MFAC Archie M factor RMFR Rmf Reference 0.10 ohmm TMFR Rmf Ref Temp degf RWA Resistivity of Formation Water 0.05 ohmm ADP Use Air Porosity to calculate CrossplotPhi No GTET GROK Process Gamma Ray? Yes GTET GRSO Gamma Tool Standoff in GTET GEOK Process Gamma Ray EVR? No GTET TPOS Tool Position Centered DSNT DNOK Process DSN? Yes DSNT DEOK Process DSN EVR? No DSNT NLIT Neutron Lithology Limestone DSNT DNSO DSN Standoff in (6.35 mm) Recommended in DSNT DNTP Temperature Correction Type None DSNT DPRS DSN Pressure Correction Type None DSNT SHCO View More Correction Options No DSNT UTVD Use TVD for Gradient Corrections? No

36 DSNT LHWT Logging Horizontal Water Tank? No SDLT DNOK Process Density? Yes SDLT DNOK Process Density EVR? No SDLT CB Logging Calibration Blocks? No SDLT SPVT SDLT Pad Temperature Valid? Yes SDLT DTWN Disable temperature warning No SDLT DMA Formation Density Matrix g/cc SDLT DFL Formation Density Fluid g/cc SDLT CLOK Process Caliper Outputs? Yes SDLT MLOK Process MicroLog Outputs? Yes IDT WRTI Survey Writing Interval 30 ft IDT SOPT Smoothing Option None ICT CLOK Process Caliper Outputs? Yes ICT NAVS Navigation Source Tool IDT Wavesonic-I WSOK Process WSTT? Yes Wavesonic-I MSWN Monopole Sliding Window Length us Wavesonic-I DSWN Dipole Sliding Window Length us Wavesonic-I PINT Process 1 Sample and Skip 0 Wavesonic-I PROM Process Mode: M=1,MX=2,MY=3,MXY=4 4 Wavesonic-I SMTH Semblance Smoothing Wavesonic-I DTSH Delta -T Shale uspf Wavesonic-I DTMT Delta -T Matrix Type Limestone 47.5 Wavesonic-I DTFL Delta -T Fluid uspf Wavesonic-I RHOM Matrix Density g/cc Wavesonic-I RHOF Fluid Density g/cc Wavesonic-I STOL Slow Tolerance Wavesonic-I SMTL Semblance Tolerance 0.25 Wavesonic-I SMTL Semblance Threshold 0.25 Wavesonic-I VPVS VPVS Ratio for Porosity 1.40 Wavesonic-I APEQ Acoustic Porosity Equation Wylie Wavesonic-I SHAO Show Advanced Options? Yes Wavesonic-I WRNM Wavesonic Receiver Normalization Method None Wavesonic-I DTRM Transmitter to First Receiver Distance - Monopole ft Wavesonic-I DTRX Transmitter to First Receiver Distance Dipole X 9.24 ft Wavesonic-I DTRY Transmitter to First Receiver Distance Dipole Y 9.24 ft Wavesonic-I DIRM Receiver Spacing 0.50 ft Wavesonic-I NRAM Number of Receivers in Array 8 Wavesonic-I DWCM Digitizer Word Count Monopole 400 Wavesonic-I DSIM Digital Sample Interval - Monopole us Wavesonic-I WDDM Waveform Digitization Delay Monopole us Wavesonic-I DWCX Digitizer Word Count Dipole X 400 Wavesonic-I DSIX Digital Sample Interval Dipole X us Wavesonic-I WDDX Waveform Digitization Delay Dipole X us Wavesonic-I DWCY Digitizer Word Count Dipole Y 400 Wavesonic-I DSIY Digital Sample Interval Dipole Y us Wavesonic-I WDDY Waveform Digitization Delay Dipole Y us Wavesonic-I NAVS Navigation Source Tool IDT ACRt RTOK Process ACRt? Yes ACRt MNSO Minimum Tool Standoff 1.50 in ACRt TCS1 Temperature Correction Source FP Lwr & FP Upr ACRt TPOS Tool Position Free Hanging ACRt RMOP Rmud Source Mud Cell ACRt RMIN Minimum Resistivity for MAP 0.20 ohmm ACRt RMIN Maximum Resistivity for MAP ohmm ACRt THQY Threshold Quality 0.50 BOTTOM

37 Data: BIRD_21_1\0001 MIXED_QUAD_WSST_ICT_IDT\ Mar-11 01:08 Date: 05-Mar-11 04:26:02 Event Type Time & Date Depth (ft) CUSTOMER EVENT LOG 04-Mar-11 23:43: Logging Mar-11 23:43 04-Mar-11 23:50: Halting Mar-11 23:43 04-Mar-11 23:50: Logging Mar-11 23:50 05-Mar-11 00:17: Halting Mar-11 23:50 05-Mar-11 00:18: Logging Mar-11 00:18 05-Mar-11 00:57: Halting Mar-11 00:18 05-Mar-11 01:08: Logging Mar-11 01:08 Event Description Data: BIRD_21_1\0001 MIXED_QUAD_WSST_ICT_IDT\HWI0739 Date: 05-Mar-11 02:09:22 CALIBRATION REPORT NATURAL GAMMA RAY TOOL SHOP CALIBRATION Tool Name: GTET Reference Calibration Date: 17-Feb-11 15:57:49 Engineer: T. HARRIS Calibration Date: 22-Feb-11 07:53:38 Software Version: WL INSITE R3.2.1 (Build 7) Calibration Version: 1 Calibrator Source S/N: 150 Calibrator API Reference: api Equivalent Calibrator API Reference:228.9 api Measurement Measured Calibrated Units Background api Background + Calibrator api Calibrator api NATURAL GAMMA RAY TOOL FIELD CALIBRATION Tool Name: GTET Reference Calibration Date: 22-Feb-11 07:53:38 Engineer: T. HARRIS Calibration Date: 04-Mar-11 22:25:32 Software Version: WL INSITE R3.2.1 (Build 7) Calibration Version: 1 Calibrator Source S/N: 150 Calibrator API Reference: api Equivalent Calibrator API Reference:228.9 api Field Verification Shop Field Units Background api Background + Calibrator api Calibrator api Shop Field Difference Tolerance / DUAL SPACED NEUTRON SHOP CALIBRATION Tool Name: DSNT Reference Calibration Date: 15-Feb-11 14:38:23 Engineer: J.COTHREN Calibration Date: 15-Feb-11 14:55:02

38 Software Version: WL INSITE R3.2.1 (Build 7) Calibration Version: 1 Logging Source S/N: DSN-382 Tank Serial Number: PVOK Reference value assigned to Tank: Snow Block S/N: 592_PV Calibration Tank Water Temperature: 40 degf Min. Tool Housing Outside Diameter: in CALIBRATION CONSTANTS Control Limit On New Measurement Prev. Value New Value Value Gain: Measurement WATER TANK SUMMARY (Horizontal Water Tank) Current Reading (Previous Coef.) Calibrated (New Coef.) Change Control Limit On Change Porosity (decp): / Calibrated Ratio: / VERIFIER Measurement Value Control Limit Snow-Block Porosity (decp): PASS/FAIL SUMMARY Background Check: Gain-Range Check: Snow-Block Check: Passed Passed Passed DUAL SPACED NEUTRON FIELD CALIBRATION Tool Name: DSNT Reference Calibration Date: 15-Feb-11 14:55:02 Engineer: T. HARRIS Calibration Date: 04-Mar-11 22:41:31 Software Version: WL INSITE R3.2.1 (Build 7) Calibration Version: 1 Logging Source S/N: DSN-382 Snow Block S/N: 592_PV NEUTRON FIELD-CHECK SUMMARY Shop Field Difference Control Limit On Change Snow-Block Porosity (decp): / PASS/FAIL SUMMARY Block Change Check: Snow Block Stat Check: Temperature Check: Passed Passed Passed SPECTRAL DENSITY SHOP CALIBRATION Tool Name: SDLT - I15M94P73 Reference Calibration Date: 30-Dec-10 12:00:01 Engineer: T. HARRIS Calibration Date: 15-Feb-11 11:40:43 Software Version: WL INSITE R3.2.1 (Build 7) Calibration Version: 1 Logging Source S/N: 20791B Aluminum Block S/N: Density: 2.589g/cc Pe: Magnesium Block S/N: Density: 1.683g/cc Pe: 2.594

39 DENSITY CALIBRATION SUMMARY Measurement Previous Value New Value Control Limit Near Bar Gain Near Dens Gain Near Peak Gain Near Lith Gain Far Bar Gain Far Dens Gain Far Peak Gain Far Lith Gain Near Bar Offset NONE Near Dens Offset NONE Near Peak Offset NONE Near Lith Offset NONE Far Bar Offset NONE Far Dens Offset NONE Far Peak Offset NONE Far Lith Offset NONE Near Bar Background Near Dens Background Near Peak Background Near Lith Background Far Bar Background Far Dens Background Far Peak Background Far Lith Background Measurement MAGNESIUM CALIBRATION BLOCK SUMMARY Current Reading (Previous Coef) Calibrated (New Coef) Change Control Limit On Change Density (g/cc) / Pe / ALUMINUM Density (g/cc) / Pe / TOOL SUMMARY Measurement Near Detector Far Detector Value Control Limits Value Control Limits QUALITY Background / / Magnesium Block / / Aluminum Block / / Resolution Internal Verifier(B+D+P+L) PASS/FAIL SUMMARY Background Quality Check: Background Range Check: Background Resolution Check: Passed Passed Passed

40 Background Verification Check: Magnesium Quality Check: Aluminum Quality Check: Gains Check: Changes in Calibration Blocks: Passed Passed Passed Passed Passed SPECTRAL DENSITY FIELD CHECK Tool Name: SDLT - I15M94P73 Reference Calibration Date: 15-Feb-11 11:40:43 Engineer: T. HARRIS Calibration Date: 04-Mar-11 22:47:56 Software Version: WL INSITE R3.2.1 (Build 7) Calibration Version: 1 Pad Temperature: 82.3 degf DENSITY FIELD CALIBRATION SUMMARY Measurement Shop Field Change Control Limit +/- Near (B+D+P+L) cps Far (B+D+P+L) cps Near Resolution Far Resolution PASS/FAIL SUMMARY Bkg Quality Check: Bkg Resolution Check: Bkg Verification Check: Passed Passed Passed MICRO LOG SHOP CALIBRATION Tool Name: SDLT - I15M94P73 Reference Calibration Date: 10-Jan-11 11:29:54 Engineer: T. HARRIS Calibration Date: 10-Jan-11 11:31:43 Software Version: WL INSITE R3.2.1 (Build 7) Calibration Version: 1 CALIBRATION COEFFICIENT SUMMARY Measurement Micro Log Normal Micro Log Lateral Measured Calibrated Measured Calibrated Units Tool Zero ohmm Calibration Point # ohmm Calibration Point # ohmm Internal Reference ohmm Measurement Micro Log Normal Tool Value Micro Log Lateral Tool Value Units Tool Zero V Calibration Point # V Calibration Point # V Internal Reference V MICRO LOG FIELD CHECK Tool Name: SDLT - I15M94P73 Reference Calibration Date: 10-Jan-11 11:31:43 Engineer: T. HARRIS Calibration Date: 04-Mar-11 22:37:00 Software Version: WL INSITE R3.2.1 (Build 7) Calibration Version: 1 Measurement Micro Log Normal Micro Log Lateral Shop Field Shop Field Units Tool Zero ohmm Internal Reference ohmm

41 Summary Signal Shop Field Difference Tolerence Microlog Normal / Microlog Lateral / DENSITY CALIPER SHOP CALIBRATION Tool Name: SDLT - I15M94P73 Reference Calibration Date: 06-Jan-11 18:37:17 Engineer: T. HARRIS Calibration Date: 06-Jan-11 18:41:26 Software Version: WL INSITE R3.2.1 (Build 7) Calibration Version: 1 CALIBRATION COEFFICIENTS Measurement Previous Value New Value Control Limit On New Value Pad Offset Pad Gain Arm Offset Arm Gain Arm Power The ring diameter is computed from: DIAMETER = PAD EXTENSION + ARM EXTENSION + TOOL DIAMETER Tool Diameter: 4.50 in Measurement PAD EXTENSION: CALIBRATION RINGS Current Reading (Previous Coeff.) Calibrated (New Coeff.) Change Control Limit On New Value Small Ring (in) / Medium Ring (in) / RING DIAMETER: Small Ring (in) / Medium Ring (in) / Large Ring (in) / PASS/FAIL SUMMARY Calibration-Coefficients Range Check: Ring-Measurement Check: Passed Passed PASS/FAIL SUMMARY Calibration-Coefficients Range Check: Passed SDLT CALIPER FIELD CALIBRATION Tool Name: SDLT - I15M94P73 Reference Calibration Date: 06-Jan-11 18:41:26 Engineer: T. HARRIS Calibration Date: 04-Mar-11 22:39:10 Software Version: WL INSITE R3.2.1 (Build 7) Calibration Version: 1 MEASURED CALIPER VALUES Control Limit On Measurement Shop Field Change New Value Pad Extension / Ring Diameter / PASS/FAIL SUMMARY Pad Extension Check: Diameter Check: Passed Passed ACCELEROMETER AND MAGNETOMETER SHOP CALIBRATION Tool Name: IDT Reference Calibration Date: 13-Jan-10 13:43:20 Engineer: S.JUNG Calibration Date: 23-Aug-10 12:23:01

42 Software Version: WL INSITE R3.0.7 (Build 3) Calibration Version: 1 Reference Gravity Field: g Reference Magnetic Field: nt * QF : value of 0 is shown for bad quality if data - reference > (2 * standard deviation) and > (0.5% of reference value) ACCELEROMETER CALIBRATION RAW DATA VALUE Raw Acc X Raw Acc Y Raw Acc Z Quality(Gravity) Quality Error(%) QF ACCELEROMETER QUALITY SUMMARY Average Calculated Gravity Field g Standard Deviation Calculated Gravity Field g ACCELEROMETER GAIN AND OFFSET GAIN OFFSET ACC X ACC Y ACC Z * QF : value of 0 is shown for bad quality if data - reference > (3 * standard deviation) and > (1% of reference value) MAGNETOMETER CALIBRATION RAW DATA VALUE Raw Mag X Raw Mag Y Raw Mag Z Quality(Magnetic) Quality Error(%) QF MAGNETOMETER QUALITY SUMMARY Average Calculated Magnetic Field nt Standard Deviation Calculated Magnetic Field nt MAGNETOMETER GAIN AND OFFSET GAIN OFFSET MAG X

43 Noise Level Value: cnts Noise Level Cal Value: g MAG Y MAG Z ARRAY COMPENSATED TRUE RESISTIVITY SHOP CALIBRATION Tool Name: ACRt e910-s Reference Calibration Date: 21-Dec-10 10:33:29 Engineer: J.COTHREN Calibration Date: 15-Feb-11 15:24:31 Software Version: WL INSITE R3.2.1 (Build 7) Calibration Version: 1 TYPICAL GAIN RANGE Subarray R12KHz R36KHz R72KHz Lower (mmho/m) Upper Lower (mmho/m) Upper Lower (mmho/m) Upper A1 (80") A2 (50") A3 (29") A4 (17") A5 (10") N/A N/A N/A A6 (6") N/A N/A N/A TYPICAL SONDE OFFSET RANGE Subarray R12KHz R36KHz R72KHz Lower (mmho/m) Upper Lower (mmho/m) Upper Lower (mmho/m) Upper A1 (80") A2 (50") A3 (29") A4 (17") A5 (10") N/A N/A N/A A6 (6") N/A N/A N/A TRANSMITTER CURRENT GAIN Signal Lower R Upper Signal R-MUD VERIFICATION Lower (ohm-m) Measured (ohm-m) Upper (ohm-m) 12K Mud Cell K K CALIBRATION SUMMARY Sensor Shop Field Post Difference Tolerance Units GTET Gamma Ray Calibrator / api DSNT Snow-Block Porosity / decp SDLT-I15M94P73 Near(B+D+P+L) / cps Far(B+D+P+L) / cps MicroLog Normal /-0.80 ohmm MicroLog Lateral /-0.80 ohmm Pad Extension /-0.10 in Ring Diameter /-0.15 in ACRt e910-s Mud Cell ohm-m

44 Data: BIRD_21_1\0001 MIXED_QUAD_WSST_ICT_IDT\ Mar-11 01:08 Date: 05-Mar-11 02:10:11 TOOL STRING DIAGRAM REPORT Description Overbody Description O.D. Diagram Delays Length Accumulated Length ft CH_HOS-590_BLK lbs Ø in ft 3.03 ft ft GTET lbs Ø in 8.52 ft ft ft DSNT lbs DSN Decentralizer lbs Ø in* Ø in 9.69 ft DSN ft DSN ft ft SDLT-I15M94P lbs Ø in ft Ø in SDL ft SDL ft ft ft IQ Flex-592_Blk lbs Ø in 5.67 ft ft IDT lbs Ø in 7.58 ft ft

45 ICT lbs Ø in ft ICT ft ft Centralizer lbs Ø in* Wavesonic-I lbs Ø in ft Wavesonic ft Centralizer lbs Ø in* ft Mud ft

46 1600 ACRt e910-s lbs Ø in 9.46 ft ft SP Ring lbs Ø in* 1.86 ft Cabbage Head lbs Ø in Ø in 0.58 ft 0.58 ft 0.00 ft Mnemonic Tool Name Serial Number Weight (lbs) Length (ft) Accumulated Length (ft) CH_HOS Hostile Cable Head with Load Cell 590_BLK GTET Gamma Telemetry Tool DSNT Dual Spaced Neutron DCNT DSN Decentralizer * SDLT Spectral Density Tool I15M94P IQF IQ Flex tool 592_Blk IDT Insite Directional Tool ICT Six Independent Arm Caliper WSTT WaveSonic Insite OBCEN Centralizer - 25 in. Overbody * OBCEN Centralizer - 25 in. Overbody * ACRt Array Compensated True Resistivity e910-s SP SP Ring * CBHD Cabbage Head Max.Log. Speed (fpm) Total 2, * Not included in Total Length and Length Accumulation. Data: BIRD_21_1\0001 MIXED_QUAD_WSST_ICT_IDT\ Mar-11 01:08 Date: 05-Mar-11 02:08:41 Plot Time: 05-Mar-11 06:19:35 Plot Range: 1460 ft to ft {ActiveWell}\Well Based\...\... Plot File: \\...\...\1_ACRT_1inx 1 INCH MAIN LOG 1K 90in Conductivity 2ft Res 0 mmho per metre SP -] 20mV [+ 0 Gamma API 150 api 90in Resistivity 2ft Res 0 50 ohm-metre 1 : in Resistivity 2ft Res 0 50 ft ohm-metre 1500

47 SP

48 SP

49 SP

50 FRSP 5900

53 Gamma API 150 api SP -] 20mV [+ 1 : in Resistivity 2ft Res 0 50 ft ohm-metre 90in Resistivity 2ft Res 0 50 ohm-metre 1K 90in Conductivity 2ft Res 0 mmho per metre Plot Time: 05-Mar-11 06:19:37 Plot Range: 1460 ft to ft {ActiveWell}\Well Based\...\... Plot File: \\...\...\1_ACRT_1inx 1 INCH MAIN LOG COMPANY ANADARKO PETROLEUM WELL BIRD 21-1 FIELD ARROYO COUNTY STANTON STATE KANSAS 9 ARRAY COMPENSATED INDUCTION LOG

Depth - Driller COMPANY WELL FIELD COUNTY. , 9.0 ft above perm. Datum. Elev.: K.B ft ft. Fold here

Depth - Driller COMPANY WELL FIELD COUNTY. , 9.0 ft above perm. Datum. Elev.: K.B ft ft. Fold here Witnessed By Recorded By Equipment Location Max. Rec. Temperature Time on Bottom Time Since Circulation Rm BHT Source Rmf Rmc Rmc Meas. Temperature Rmf Meas. Temperature Rm Meas. Temperature Source of