For reliable and continuous measurement of water quality insist on Aqua SMARTPro Transmitters

Transcription

1 For reliable and continuous measurement of water quality insist on Aqua SMARTPro Transmitters

2 For over six decades, Forbes Marshall has been building steam engineering and control instrumentation solutions that work for process industry. Today we have evolved into a leader in process efficiency and energy conservation through technology tie-ups and focused investments in manufacturing and research. Our joint ventures with the world's leading names enable us to deliver quality solutions in 14 countries. Forbes Marshall is unique in having extensive expertise in both steam and control instrumentation. The dual expertise has allowed us to engineer industry specific systems that focus on energy efficiency and utilities management for sectors as diverse as textiles, food processing, paper, power and chemicals. Our teams are peopled by some of the finest engineers in the land. These highly trained professionals have developed innovative solutions and saved millions of rupees in process costs for our clients. Our business practices and processes have combined into a singular philosophy of being trusted partners who provide innovative solutions. It's a philosophy we are proud to live up to. We have long standing partnerships with some of the best names in the control instrumentation industry such as Arca, Codel, Krohne and Shinkawa, to develop, design and supply innovative solutions for measurement and monitoring of process parameters. With a combination of specialist knowledge and the latest technology, we provide products and solutions to achieve optimum efficiency. Our products are a unique combination of hardware and software that make them reliable and accurate. Forbes Marshall, your trusted partner in providing Water Quality analyzers in India, introduces the microcontroller based 2-WIRE Transmitter, Field Mount Aqua SMARTPro series which assures reliable and continuous measurement of parameters like ph, Redox, Dissolved Oxygen, Conductivity, Resistivity and Total Dissolved Solids (TDS) which are of vital importance across the entire spectrum of applications. Aqua SMARTPro Series is feature packed with - User Friendly, Password Protected Menu-driven program with a simple set-up and easy to use. Built-in non-volatile memory to ensure that calibration and other information is not erased if power supply fails. Calibration and sensor offset adjustment from the keypad, additional magnetic key for programming. Large dual line Display. Automatic temperature compensation (ATC). Manual temperature compensation setting without ATC probe, with independent setting for calibration and process temperature. One galvanically isolated Current output 4 20mA with communication Protocol. Protection against electromagnetic interference Three galvanic isolated open collector output for Over-, Under- and Error Detection in non-ex version. Applications Dimension Drawing DM water RO water Water treatment Chemical / Petrochemical Bio Pharma Sugar/ Textile / Paper/ Food Power Plants And many more

3 General Specifications Display Local Display Display Function Two line dot matrix with 10 characters per line LCD display Programmable for continuous or sequential display of measured value, temperature, units and error messages. Keypad Keypad Three button keypad and magnetic pin programming with user friendly menu interface. Communication Protocol Current Open Collector s (For Safe Area version only) 7.0 Compatible 4-20 ma DC, galvanically isolated output with accuracy better than 0.3% of full scale Three open collector outputs with max load of 24VDC, galvanically isolated from the sensor and the output current for: 1. Error Detection 2. Over Detection 3. Under Detection NOTE: External relay option available for potential free contact requirment. Power Requirements Input Power consumption VDC with maximum load 600Ù at 24 VDC Less than 53mW at 24V DC Mechanical Specifications Housing Material Connections Glands Weight Mounting Type Intrinsically Safe Die-cast Aluminium (LM6) with epoxy paint (Non-corrosive). 1 x Ω NPT Sensor 2 x M20 Supply and Open Collector s 4000 Gms. Wall / 2 Pipe type (Vertical and Horizontal) Ex[ia] Group IIA, IIB, IIC T6 Protection Class IP 67 Electromagnetic Compliance as per EMC Directive (2004/108/EEC) Emitted Interference Generic Emission & Immunity Standards IEC & IEC Immunity to Interference Radiated Immunity as per IEC Electrical fast Transient or Burst Immunity As per level 2 - IEC Surge Immunity As per Level 2 IEC RF Conducted Susceptibility As per Level 3 IEC Immunity to Electrostatic Discharge As per Level 3 - IEC Environmental Conditions Ambient Temperature Operating Maximum Relative Humidity -20 to +70º C 90% Non-condensating

4 Technical Specifications ph Span mv (ORP) Span Temperature 0 14 ph 0.01 ph +/ ph Minimum 2pH to Maximum 14pH (Programable) +/ mv +/- 1 mv +/- 1 mv Minimum 200mV to maximum 4000 mv (Programmable) -20º C to +200º C Sensor PT 100 (Default) / PT 1000 Calibration Automatic or Manual ph Sensor Slope 70% to 110% ph sensor zero Method Calibration Mode Current ph/mv FOR ph Aquamon SMARTPro 8966 ± 2pH Single / Double Point Temperature Sensor Short Slope Error Zero Error Calibration Error Proportional to measured ph/mv. Galvanically isolated from the sensor with accuracy better than 0.3% of full scale Conductivity (with auto range facility) Measuring Cell Constant K Span Calibration Conductivity Resistivity 0 to 10 µs/cm to 100 µs/cm to 1000 µs/cm to 10 ms/cm to 100 ms/cm ± 0.5% of FS of Minimum 5% to Maximum 100% of measurement range (Programmable) Single point (with auto range facility) Measuring Cell Constant K FOR CONDUCTIVITY Aquacon SMARTPro MÙ.cm to 10 KÙ.cm MÙ.cm to 1 KÙ.cm MÙ.cm to 0.1 KÙ.cm MÙ.cm to 0.01KÙ.cm ± 0.5% of FS of

5 Temperature -20º C to +200º C Sensor PT 100 (Default) / PT 1000 Calibration Mode Current Conductivity Automatic or Manual or Uncompensated (Programmable) Sensor Open Sensor Short Temperature Sensor Short Cell Constant error Galvanically isolated output proportional to the measured conductivity value with accuracy better than 0.3% of full scale. DO (with auto range facility) Measuring Unit Temperature Sensor Process parameter Pressure Salinity Humidity Calibration DO Current FOR DO AquaDO SMARTPro to 500 % to 9999 µg/l or PPB to 20 mg/l or PPM to 50 mg/l or PPM 0.1 ± 0.5% of FS to Deg C NTC 22 K Ohm Automatic or Manual 0 to 5 bar (Programmable) 0 to 50 PPT (Programmable) 0 to 100% (Programmable) Single/Dual point calibration Sensor Short Temperature Sensor Short Calibration Mode Unstable Current Error Error Proportional to measured DO value. Galvanically isolated from the sensor with accuracy better than 0.3% of full scale

6 TDS FOR TDS AquaTDS SMARTPro 8969 (with auto range facility) Measuring * Cell Constant K 0 to 10 ppm ppm 0 to 100 ppm ppm 0 to 1000 ppm ppm 0 to 10 ppt ppt 0 to 100 ppt ppt *TDS ranges calculated considering TDS factor 1. Doc#CIG/0111/64/V1.R0 TDS Factor Temperature 0.1 to 1.00 (programable) -20º C to +200º C Sensor PT 100 (Default) / PT 1000 Temperature Coefficient Calibration Mode 0.0 to 5.0 % (Programmable) Automatic or Manual or Uncompensated (Programmable) Sensor Open Sensor Short Temperature Sensor Short Cell Constant error Proportional to measured TDS value. Galvanically isolated from the sensor with accuracy better than 0.3% of full scale. Ordering Information MODEL DESCRIPTION ITEM CODE Aquamon SMARTPRO 8966 ph Transmitter SMARTPRO PH 8966 Aquacon SMARTPRO 8967 Conductivity Transmitter SMARTPRO COND 8967 AquaDO SMARTPRO 8968 DO Transmitter SMARTPRO DO 8968 AquaTDS SMARTPRO 8969 TDS Transmitter SMARTPRO TDS 8969 NOTE: Add a suffix as Ex to the model or item code for Intrinsically safe requirement. (e.g. SMARTPRO PH 8966-Ex)