ELECTRONICS HOBBY CLUB

Transcription

1

2 ELECTRONICS HOBBY CLUB Innovate to implement EVENT 1: Repository inspection [DAY 1] (HARDWARE MODELLING) Theme: SMART MUSEUM All the participants have to design the electronic circuits along with the prototype for the following statements mentioned in the modules. Senior category (open for all) Problem Statement 1: To guide the visitor inside the museum we require a robot which display the place name at each checkpoints of the museum. Task Design and construct a line follower robot without using Microcontroller and to display the value of each checkpoint in the seven segment display. Description In the below arena diagram the black line is drawn whose thickness is 3cm. Initially the robot is at START position as mentioned. Also it has three grey circles which are cylindrical poles covered with black paper. When the bot crosses the cylindrical pole the seven segment display counts one at Point-1 till it has not cross the second pole at Point-2.When it crosses Point-2 it displays two until it has not crossed the Point-3.And finally it displays three till it has not reached the FINISH line.

3 Rules The bot should be design without using Microcontroller. If any participant use microcontroller then he/she will be disqualified. The dimension of the bot should be 20 cm X 20cm X 10cm (max). The bot should be based on only combinational circuit and basic components of electronics The Battery or Power Adapter capacity should not exceed 12 V Arena Problem Statement 2: Museums preserves many antiques, historical archives and biological specimen therefore it is important to monitor the room temperature, air quality measures and restricting the visitors from entering the prohibited areas. Task

4 Different physical and chemical factors, such as light, temperature, relative humidity, pollutants and so on, can affect works of art on display. Each factor does not act individually, but its effect can be enhanced or accelerated by the presence of other factors. So the task is to design a prototype of the room where the parameter light intensity, motion pressure, temperature and air quality is maintained using microcontroller and develop the alarming system if the value sensed is more than the tolerance value. Bonus: If the data get from sensor is logged in the text file or Excel file Rules The parameters shown by the device should include temperature, light intensity, air quality and harmful gases. Any additional features will fetch you extra marks. It should have a display system which can show the tolerance value and the current value of the parameters in the room. Problem Statement 3: Innovation is the demand of today This problem statement is a self-generated idea solution to an existing problem. The participants have to be innovative and should make a hardware model so that it could give a satisfactory solution to their idea. Rules There is no restrictions on the use of electronic component Microcontrollers can be used Idea should be innovative and new Hardware model of the same is required Junior category: (For 1 st Year Students only)

5 In this part the participants have to show up their innovative skills to provide solution to any real time problem of the society. A working model of the same should be brought on the day. They can support their ideas by necessary diagram, simulation, hardware or PPT. Rules: The members in a team should not exceed more than 2 Only first year students can participate in this category Any innovative circuit or funny circuits will be welcomed Registration Process: Students can participate in individual or in group with maximum three member in each group. To register student have to visit the SANKALP 2K18 website or through OIS and fill the details under EHC event section. EVENT COORDINATORS: CHANDRA SHEKHAR SAHOO: ARBIND MAHTO: