ARTICOLI NUOVI Pag. 1
|
|
- June Lamb
- 5 years ago
- Views:
Transcription
1 codice descrizione Immagine ANTIFURTO PER CARRELLI Couplings safety lock CHIAVE PER ANTIFURTO Key for coupling safety lock CHIUSURA IN FERRO ZINCATA Board s latch CHIUSURA IN FERRO ZINCATA Board s latch ARTICOLI NUOVI Pag. 1
2 06009 RISCONTRO PER CHIUSURE IN FERRO Bar for board s latches CHIUSURA IN FERRO ZINCATA Board s latch CHIUSURA IN FERRO ZINCATA CON CHIAVE Board s latch with lock CHIUSURA IN FERRO ZINCATA Board s latch ARTICOLI NUOVI Pag. 2
3 06048 CERNIERA IN FERRO ZINCATA Board s hinge CERNIERA IN FERRO ZINCATA Board s hinge CERNIERA IN FERRO ZINCATA Board s hinge PIASTRA IN FERRO ZINCATA Floor holder ARTICOLI NUOVI Pag. 3
4 ARGANELLI ELETTRICI A 12 V CORRENTE CONTINUA Electric winches Direct current ARTICOLO Caratteristiche tecniche Tecnical characteristics Tiro massimo in linea orizzontale Max line pull Tiro nominale orizzontale Rated line pull Velocità Speed Motore Motor Riduzione Gear reduction ratio Dimensioni cavo Cable size Dimensioni tamburo Drum dimensions Dimensioni ingombro Overall dimensions Peso Weight 900 kg 900 kg 1,3 3,2 m/min 12 V 0,7 Kw 0,9 Hp 153:1 diam. 4 mm x 15 m diam. 31,5 x 73 mm 285 x 105 x 105 mm 5kg 2200 kg 1800 kg 1,5 2,1 m/min 12 V 1,3 Kw 1,8 Hp 462:1 diam. 5,4 mm x 16 m diam. 50 mm x 76 mm 341 x 14 x 152 mm RULLO LATERALE CON SEI RULLI E TUBO DA 40 COMPLETO Six rollers with 40-mm tube complete 16 kg 2720 kg 2720 kg 1,3 4,5 m/min 12 V 1,3 Kw 1,8 Hp 294:1 diam. 7,2 x 32 m diam. 63 x 228 mm 520 x 180 x 175 mm 29 kg RULLO LATERALE CON OTTO RULLI E TUBO DA 40 COMPLETO Eight rollers with 40-mm tube complete RULLO CENTRALE PICCOLO DA 60 MM Central roller 60-mm fixing RULLO CENTRALE PICCOLO DA 70 MM Central roller 70-mm fixing ARTICOLI NUOVI Pag. 4
5 03342 FANALE POSTERIORE DESTRO A 4 FUNZIONI CON LUCE TARGA (posizione,stop,direzione,luce targa) Right rear light with 4 functions (position,stop,indicator,numberplate light) FANALE POSTERIORE DESTRO A 5 FUNZIONI CON LUCE TARGA (posizione,stop,direzione,retromarcia,luce targa) Right rear light with 5 functions (position,stop,indicator,reverse light,numberplate light) FANALE POSTERIORE SINISTRO A 5 FUNZIONI CON LUCE TARGA (posizione,stop,direzione,retronebbia,luce targa) Left rear light with 5 functions (position,stop,indicator,rear fog light,numberplate light) GIROFARO ARANCIO CON CALAMITA E VENTOSA 12 V Revolving warning-lamp with bulb,magnetic kit,cable and connection plug 12 volts GIROFARO ARANCIO A GAMBO Revolving warning-lamp with bulb and installed fitting pipe ARTICOLI NUOVI Pag. 5
6 03391 LAMPEGGIATORE MULTITENSIONE A FLASH (10V-100V) Multi-voltage xenon flashing beacon single flash SPINOTTO DA SALDARE Adapter socket to be welded SPINOTTO FILETTATO DADO IN ACCIAIO Threaded adapter socket,steel nut SPINOTTO CON BASE Adapter socket with base AVVISATORE ACUSTICO MULTITENSIONE DI RETROMARCIA V Multi-voltage (12V-24V) back-up alarm ARTICOLI NUOVI Pag. 6
7 03851 PARAFANGO IN LAMIERA Wing for trailers FANALE POSTERIORE DESTRO A 3 FUNZIONI (posizione,stop,direzione) CON TRE LAMPADINE Right rear light with 3 functions (position,stop,indicator) with 3 bulbs FANALE POSTERIORE SINISTRO A 3 FUNZIONI (posizione,stop,direzione) CON TRE LAMPADINE Left rear light with 3 functions (position,stop,indicator) with 3 bulbs IMPIANTO PER RIMORCHIO Lighting kit for trailer Comprende: Fanali:1 fanale posteriore destro a 4 funzioni Art fanale posteriore sinistro a 5 funzioni con retronebbia Art.3340 Cablaggi:cavi centrali separati per ogni fanale mt.11 cavo 4x0,50,mt.11 Cavo 5x0,50 Catadiottri:2 catadiottri triangolari integrati nei fanali Spina:spina a 7 poli in plastica a libro Art.1280 Including: Lamps:1 right rear light with 4 functions Art left rear light with 5 functions with rear fog light Art.3340 Cable: 2 central cables separated for each lamp mt. 11 4x0,50 cable, mt.11 5x0,50 cable Reflectors:2 triangular reflectors included in lamps Plug:7-way plastic plug Art.1280 ARTICOLI NUOVI Pag. 7
8 BARRE IN PLASTICA Plastic bars BARRA IN PLASTICA LARGHEZZA:1 MT Comprende: Fanali:2 fanali posteriori a 4 funzioni con luce targa Art.2022 Cablaggi:5 mt. di cavo centrale 5x0,50, 1,2 mt. cavo 4x0,50 Catadiottri:2 catadiottri triangolari Art. 748 Lampadine:2 lampadine 12V/21W Art lampadine 12V/5-21W Art.729 Spina:spina a 7 poli in plastica a libro Art BARRA IN PLASTICA LARGHEZZA:1,20 MT Comprende: Fanali:2 fanali posteriori a 4 funzioni con luce targa Art.2022 Cablaggi: 5 mt. di cavo centrale 5x0,50, 4 mt. cavo 4x0,50 Catadiottri:2 catadiottri triangolari Art. 748 Lampadine:2 lampadine 12V/21W Art lampadine 12V/5-21W Art.729 Spina:spina a 7 poli in plastica a libro Art STAFFA PER RULLO QUADRUPLO N.B.:La staffa è fornita senza rulli e senza tubo quadro Plastic bar Widht:1 mt Including: Lamps: 2 rear light with 4 functions with numberplate light Art.2022 Cable:5 mt of central cable 5x0,50 1,2 mt 4x0,50 cable Reflectors:2 triangular reflectors Art.748 Bulbs:2 bulbs 12V/21W Art bulbs 12V/5-21W Art.729 Plug:7-way plastic plug Art.1280 Plastic bar Widht:1,20 mt Including: Lamps: 2 rear light with 4 functions with numberplate light Art.2022 Cable:5 mt of central cable 5x0,50 1,2 mt 4x0,50 cable Reflectors:2 triangular reflectors Art.748 Bulbs:2 bulbs 12V/21W Art bulbs 12V/5-21W Art.729 Plug:7-way plastic plug Art.1280 Stirrup for quadruple lateral roller without rollers N.B.:the fork is without rollers and without pipe STAFFA NUOVO TIPO PER RULLO QUADRUPLO N.B.:La staffa è fornita senza rulli e senza tubo quadro Stirrup for quadruple lateral roller without rollers New type N.B.:the fork is without rollers and without pipe PEZZO CENTRALE PER RULLI QUADRUPLI ART Central stirrup of lateral rollers Art ARTICOLI NUOVI Pag. 8
9 02619 STAFFA A FARFALLA TIPO NUOVO PER TUBO DA 30 MM N.B.:La staffa è fornita senza rulli e senza tubo quadro New type fork for rollers for 30-mm pipe N.B.:the fork is without rollers and without pipe STAFFA A FARFALLA TIPO NUOVO PER TUBO DA 40 MM N.B.:La staffa è fornita senza rulli e senza tubo quadro New type fork for rollers for 40-mm pipe N.B.:the fork is without rollers and without pipe STAFFA A FARFALLA NUOVO TIPO CON RULLI PER TUBO QUADRO DA 30 MM New type fork with rollers for 30-mm pipe STAFFA A FARFALLA NUOVO TIPO CON RULLI PER TUBO QUADRO DA 40 MM New type fork with rollers for 40-mm pipe STAFFA A FARFALLA VECCHIO TIPO CON RULLI PER TUBO QUADRO DA 30 MM Old type fork with rollers for 30-mm pipe STAFFA A FARFALLA VECCHIO TIPO CON RULLI PER TUBO QUADRO DA 40 MM Old type fork with rollers for 40-mm pipe STAFFA TIPO NUOVO PER RULLO QUADRUPLO CON RULLI SENZA TUBO Stirrup for quadruple lateral roller with rollers New type STAFFA TIPO VECCHIO PER RULLO QUADRUPLO CON RULLI SENZA TUBO Stirrup for quadruple lateral roller with rollers ARTICOLI NUOVI Pag. 9
10 02238 RULLO LATERALE CON ANIMA IN NYLON RIVESTITO IN GOMMA FORO 15 MM Lateral pvc roller with nylon heart covered with rubber Hole:15 mm RULLO CENTRALE CON ANIMA IN NYLON RIVESTITO IN GOMMA FORO 25 MM Central roller with nylon heart covered with rubber Hole:25 mm PERNO DA 25 MM PER RULLO CENTRALE ART mm pin for central roller art ARTICOLI NUOVI Pag. 10
TRT 135 Swing DISBOSCATORE TRINCIATUTTO PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FORESTRY MOWER FOR SLOPING SURFACES
CATALOGO RICAMBI PARTS CATALOGUE TRT 135 Swing DISBOSCATORE TRINCIATUTTO PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FORESTRY MOWER FOR SLOPING SURFACES MODELLO MODEL 105 Rev. 01 26/08/2014
More informationTRT 110 Swing DISBOSCATORE TRINCIATUTTO PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FORESTRY MOWER FOR SLOPING SURFACES
CATALOGO RICAMBI PARTS CATALOGUE TRT 110 Swing DISBOSCATORE TRINCIATUTTO PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FORESTRY MOWER FOR SLOPING SURFACES MODELLO MODEL 096-097 Rev. 01 26/08/2014
More informationTSR 110 Swing TRINCIASARMENTI PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FLAIL MOWER FOR SLOPING SURFACES
CATALOGO RICAMBI PARTS CATALOGUE TSR 110 Swing TRINCIASARMENTI PROFESSIONALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING FLAIL MOWER FOR SLOPING SURFACES MODELLO MODEL 098-099 Rev. 01 26/08/2014 T8022
More informationMC 110 Swing TRINCIASARMENTI PROFESSIONALE A ROTORE VERTICALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING VERTICAL FLAIL MOWER FOR SLOPING SURFACES
CATALOGO RICAMBI PARTS CATALOGUE MC 110 Swing TRINCIASARMENTI PROFESSIONALE A ROTORE VERTICALE OSCILLANTE PER PENDENZE PROFESSIONAL SWINGING VERTICAL FLAIL MOWER FOR SLOPING SURFACES MODELLO MODEL 108-109
More informationTSR 110 TRINCIASARMENTI PROFESSIONALE PROFESSIONAL SWINGING FLAIL MOWER
CATALOGO RICAMBI PARTS CATALOGUE TSR 110 TRINCIASARMENTI PROFESSIONALE PROFESSIONAL SWINGING FLAIL MOWER MODELLO MODEL 111-112 Rev. 01 27/08/2014 60514 TSR 110 2343 13136 2302 2410/10 2410/10 2408/05
More informationsmooth Design by Ridea
56 57 smooth Design by Ridea L unica vera piastra riscaldante con 10 mm di spessore. Il massimo del design e del minimalismo. The only true heating plate with 10 mm thick. The maximum expression of design
More informationAX1001. Smith/Functional training Combo-free weight ASSEMBLY INSTRUCTIONS
AX1001 Smith/Functional training Combo-free weight ASSEMBLY INSTRUCTIONS EXPLODED DIAGRAM 83 84 84 85/86 87 87 88 89 90 91 62 64 64 64 64 64 64 65 65 65 65 66 66 65 66 66 65 63 63 66 67 68 55 66 66 70
More informationPARTS LIST: Air Control Assembly (1632 Sander)
PARTS LIST: Air Control Assembly (1632 Sander) 1 6293482 Filter... 1 2 6293483 Solenoid Valve... 1 3 6293484 Brake Cylinder... 1 4 6293485 Multi-Hole Connector... 1 5 6293486 Air Valve... 1 6 6293487 Air
More informationTRT 60 Swing DECESPUGLIATORE TRINCIATUTTO OSCILLANTE PER PENDENZE SWINGING BRUSH-CUTTER FORESTRY MOWER FOR SLOPING SURFACES
CATALOGO RICAMBI PARTS CATALOGUE TRT 60 Swing DECESPUGLIATORE TRINCIATUTTO OSCILLANTE PER PENDENZE SWINGING BRUSH-CUTTER FORESTRY MOWER FOR SLOPING SURFACES MODELLO MODEL 014-024-034-044-054 T5016 2382B
More informationMADE IN ITALY SISTEMI DI FISSAGGIO ED ACCESSORI CLAMPING SYSTEMS AND ACCESSORIES
MADE IN ITALY SISTEMI DI FISSAGGIO ED ACCESSORI CLAMPING SYSTEMS AND ACCESSORIES 85 97 Prodotti per il serraggio delle tubazioni in genere. Realizzati su nostre specifiche e distribuiti in collaborazione
More informationMeccanismi per porte pieghevoli. Equipments for folding doors
Serie 3100 Serie 2500 Meccanismi per porte pieghevoli Equipments for folding doors Serie 3100 Serie 2500 serie 2500 SERIE 2500 Meccanismo per porta pieghevole a 2 pannelli, e apertura con maniglia tradizionale.
More informationPIZZA ROLLER DOUGH ROLLER MACHINE MODELS SF SF320 - SF400 - SF500
Spare Parts PIZZA ROLLER DOUGH ROLLER MACHINE MODELS SF 250 - SF320 - SF400 - SF500 1 1. SPARE PARTS 1 1.1 ORDERING SPARE PARTS WHEN ORDERING ANY SPARE PARTS ALWAYS SPECIFY THE FOLLOWING: - NAME OF THE
More informationn e m Apertura professionale verso l'alto per vetri piani lineari Sistema 082 Professional lift up opening for flat linear glasses System 082
Apertura professionale verso l'alto per vetri piani lineari Sistema 082 Professional lift up opening for flat linear glasses System 082 n e m N 0 E A R srls 12.2018 082/01 n e m N 0 E A R srls 800 (Max)
More informationPURO Water Technology
2018/19 CATALOG PURO produces a range of standard systems that has been tested during ten years of actual use. This line of products uses special quartz tubes and low pressure lamps to cover a wide range
More informationSPARE PARTS CATALOGUE CATALOGO PARTI DI RICAMBIO 6-10 GN 1/1 ELECTRIC CONVECTION OVEN METRO FORNO CONVEZIONE ELETTRICO 6-10 GN 1/1 METRO
PNC Model Ref. Group Page Notes SPARE PARTS CATALOGUE CATALOGO PARTI DI RICAMBIO 6-10 GN 1/1 ELECTRIC CONVECTION OVEN METRO FORNO CONVEZIONE ELETTRICO 6-10 GN 1/1 METRO 240001 FCF10EMET a MCF 1-2-3 400V
More informationSISTEMA DI PASSERELLE E CANALI CALPESTABILI CABLE TRAYS AND CABLE TRUNKINGS SYSTEM TRAMPLING
SISTEMA DI PASSEREE E CANAI CAPESTAII CAE TRAYS AND CAE TRUNKINGS SYSTEM TRAMPING Sistema di passerelle e canali calpestabili Cable trays and cable trunkings system trampling Canalina Asolata + Coperchio...pag.
More informationFRONT AND REAR HOOD ASSEMBLY (GRAIN CART) REF PART# DESCRIPTION QTY RETAIL
FRONT AND REAR HOOD ASSEMBLY (GRAIN CART) 1 0001-014311 GRAIN CART STEEL FRONT HOOD 1 1A 0001-014313 GRAIN CART 5" OFFSET STEEL FRONT HOOD 1 2 0001-014312 GRAIN CART STEEL REAR HOOD 1 N/A 0001-014901 GRAIN
More informationset of safety brace steel cable draw-up gate kpl
0324101 7108020 8208100 Order-nr. Description Number 0324101 safety brace steel cable draw-up gate 2 7108020 hexagon-head tap bolt M8x20 galv. 2 8208100 hexagon nut M8 galv. 2 set of safety brace steel
More information1950 Deluxe Parts. Brad Frank Restorations ph: Independence Avenue, Chatsworth, CA USA fax:
1 Top Marquee $100.00 2 Back Mural $100.00 3 Strike Up The Band screen $100.00 4 Hit Tune Of The Week screen $100.00 5 Custom made lower screens CALL 6 Cast CC Stand set of 4 $225.00 7 Cast CC Stand Each
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More information535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
More informationCM-1258Y-SD Concrete Mixer
Form No. 3421-382 Rev A CM-1258Y-SD Concrete Mixer Model No. 68011 Serial No. 402000000 and Up Register at www.toro.com. Original Instructions (EN) *3421-382* A Ordering Replacement Parts To order replacement
More informationSPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
More information25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
More informationTHANK YOU FOR PURCHASING THE M/T METAL SERIES MODULAR JK FRONT BUMPER
THANK YOU FOR PURCHASING THE M/T METAL SERIES MODULAR JK FRONT BUMPER Your safety and the safety of others is very important. Please read and understand all safety precautions before installing this or
More informationGF 12II. Parts Manual MODEL: Aug 2001 P/N Rev B A10605
GF 12II MODEL: 3120 Parts Manual A10605 Aug 2001 P/N 4210159 Rev B TABLE OF CONTENTS GENERAL INFORMATION... 2 FINAL ASSEMBLY... 4 DOOR ASSEMBLY... 6 Coin Insert Assembly... 8 Delivery Assembly... 10 Light
More informationSPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 342186-7 SWITCH PROTECTOR 1 002 911118-1 PAN HEAD SCREW M4X12 6 003 155512-9 SWITCH PLATE 1 004 651757-2 SWITCH ABK266 1 006 685712-2 SPONGE SHEET 60X60 1 007 911118-1 PAN HEAD SCREW M4X12 1
More informationOWNERS MANUAL MODEL F660 HIP SLED
OWNERS MANUAL MODEL F HIP SLED QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts, we will guarantee your complete
More informationTU SERIES. SENSORI ULTRASONICI M30 - SERIE TU TU series - M30 ultrasonic SENSORS TU 1 / C 0-0 E
SENSORI ULTRASONICI M - SERIE TU TU series - M ultrasonic SENSORS Sensori ultrasonici M serie TU M ultrasonic sensors TU series b Caratteristiche principali Main features > Modelli con uscita digitale
More informationNumber Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationSole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training
Sole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training Delivery Requirements Ground delivery Inside delivery to customer-specified location Unpack and assemble machine, and remove packing
More informationN. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Dump Body tarping system. With tarping systems
More informationMODEL 83 Pail Handler
MORSE MFG. CO., INC. 727 West Manlius Street P.O. Box 518 East Syracuse, NY 13057-0518 Phone: 315-437-8475 Fax: 315-437-1029 Email: service@morsemfgco.com Website: www.morsemfgco.com COPYRIGHT 2005 MORSE
More informationRugged Ridge 2 Receiver Hitch Kit (J21068)
Rugged Ridge 2 Receiver Hitch Kit (J21068) Installation Time: 1-2 Hours Tools Required: ¾ Open End Wrench 18 mm Socket ¼ drive Pliers/Needle nose pliers/channel locks, etc. Torque wrench Phillips head
More informationCERNIERE PER STRUTTURE METALLICHE HINGES FOR METAL FRAMES
S E Z I O N E 0 2 0 1 4 COORI/FINITURE STANDARD STANDARD COOURS/FINISHINGS COORE NERO cod. 09004 ACK Colour code 09004 Esempio codifica/code example: art./09004 (110/08/09004) COORE ANTRACITE cod. 0701
More information96000 Hopper and Drive Components
Western Products, PO Box 245038, Milwaukee, WI 524-9538 www.westernplows.com November 1, 2011 Lit. No. 95843, Rev. 07 96000 Hopper and Drive Components Tornado Hopper Spreader Parts List This Parts List
More information第 4 页. 3. Apply instand type AB glue to the holes in the aileron and hinges. Epoxy the aileron to the wing.
TopRCModel-USA.com TopRCModel-USA.com TopRCModel-USA.com Accessory list for the installation of aileron and flap. 3. Apply instand type AB glue to the holes in the aileron and hinges. Epoxy the aileron
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 7646 & 766 For GMC Sierra 500 As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message has a specific purpose.
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationChevy Tahoe Utility Vehicle
Chevy Tahoe Utility Vehicle 1 TOOLS NEEDED 5/8 Step Drill Bit Hand Drill or Cordless Drill Measuring Tape or Ruler Grease Pencil (White or Black) Small Tie Wraps Silicone Adhesive Sealant Phillips Screw
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More information3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit
More informationSistema di connessione LED Chip Array / LED Chip array connection system
Sistema di connessione LED Chip Array / LED Chip array connection system Cod. 034170 CONNETTORE LED BRIDGELUX ES ARRAY 25,8X22,8MM BIANCO Dimensioni chip array Chip array dimension Materiale corpo Body
More informationHardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers
Hardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers Hinge Nuts Spring Bolt Washers Bolts - Hinge Contents Ramp and door accessories: Hinges, spring bolts, antiluce plates, gas
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationInstruction Guide 4A90L
Instruction Guide 4A90L Kargo Master Rancho Cordova, CA 95742 800-343-7486 CustomerService@KargoMaster.com DATE: *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS
More informationINSTALLATION INSTRUCTIONS ATV PLOW Mount Kit: PN Application: HONDA RANCHER
INSTALLATION INSTRUCTIONS ATV PLOW Mount Kit: PN 63290 Application: 2000+ HONDA RANCHER Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have
More informationVITERIA E GIUNZIONI. custom made quality VITERIA E GIUNZIONI. Screws and joints / Vis et joints SCREWS AND JOINTS / VIS ET JOINTS VITERIA
custom made quality E GIUNZIONI Screws and joints / Vis et joints 1 2 art 174 Vite di giunzione diam.5 in metallo completa. (Misure come da schema) Finiture disponibili: nichelata - ottonata - brunita.
More informationRYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in
More informationRYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
More information09/2015. Mod: CFE 102. Production code:
09/2015 Mod: CFE 102 Production code: 697513 PNC Model Ref. Group GN Page Notes SPARE PARTS CATALOGUE CATALOGO PARTI DI RICAMBIO 10 GN ELECTRIC CONVECTION OVEN FORNO CONVEZIONE ELETTRICO 10 GN 240206 FCFE101-0
More informationSection F TEL-E-SCORE
Section F TEL-E-SCORE December 2009 1F Index No. Part No. Description 1. N.A. Support Bracket 2. N.A. Filler 3. N.A. Base Assembly 4. N.A. Wiring Diagram Decal 5. N.A. Lower Unit Cover 6. N.A. Flat Socket
More informationSit Down Table Assembly Instructions
Sit Down Table Assembly Instructions Parts that come with your sit down table A B C D E F G H I J K L M N Extension leaf Table with cutout for machine Two table legs One table leg with long support One
More informationASSEMBLY INSTRUCTIONS JK270
TOOLS REQUIRED: One knife to open packaging Two ½ wrench or socket (metric 13) One 9/16 wrench or socket (metric 14) One #2 Philips (+) screwdriver NOTE: All bolts are 9/16 (metric 14) and nuts are ½ (metric
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 60036 (Black) & 60037 (Chrome) For Chevrolet Silverado 3/4 Ton Trucks (Not suitable for Winches larger than,000 lbs.) As you read these
More informationinstallation guide
JANUS INTERNATIONAL 1 866 562 2580 w w w. j a n u s i n t l. c o m 2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000
More informationINSTALLATION GUIDE TOYOTA 4 RUNNER (2013+) REAR BUMPER
INSTALLATION GUIDE TOYOTA 4 RUNNER (2013+) REAR BUMPER CONTENTS CONTENTS Rear Bumper (base or dual arm) Installation...................................... 2 Dual Swing Installation..........................................................
More informationINSTALLATION INSTRUCTIONS ATV SNOW PLOW WARN KIT PN: KAWASAKI KIT PN: KAF Application: Kawasaki Prairie
INSTALLATION INSTRUCTIONS ATV SNOW PLOW WARN KIT PN: 37838 KAWASAKI KIT PN: KAF90-220 Application: Kawasaki Prairie 1997-2002 Your safety, and the safety of others, is very important. To help you make
More informationMateriale / Material. Davanti / Front side Dietro / Back side
Valvole e innesti DI CarICa NGV2 Valvola di caricainnesto Filling valvereceptacle Inox / Stainless Steel 40 C +120 C Ø 10 mm Ø35 75 71 NGV2 12. F T F ATTACCHI PER TUBO / CONNECTION FOR PIPE 12: Per tubo
More informationCONNETTORI SERIE VCM \ VCM SERIES CONNECTORS
3 CONNTTORI, PRSSACAVI ACCSSORI VALCOM CONNTTORI SRI VCM \ VCM SRIS CONNCTORS I Connettori Valcom VCM sono due serie di connettori progettati per soddisfare le esigenze operative della Direttiva ATX. Sebbene
More informationParts Catalog Admiral 28 Cylindrical Scrubber
Parts Catalog Table of Contents Front bounce protection (97116834)... 4 Wheel suspension (97103725)... 6 Chassis (97115422)... 8 (97114763)... 10 Steering (97073738)... 12 Seat bracket (97118616)... 14
More informationHeacent 3D printer assembly manual. Prusa i3
Heacent 3D printer assembly manual Prusa i3 Y-axis assembly 1. Y axis motor section: Find the belowing parts bag, Y-axis motor Assembled parts are separated as shown below, note that the motor between
More informationCoolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
More informationHD installation guide
JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW
PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135
More informationV Installation instructions, accessories. Auxiliary seat. Volvo Car Corporation Gothenburg, Sweden V70 (00-08) 2002
Installation instructions, accessories Instruction No 8624018 Version 1.3 Part. No. 30749269, 30749270, 30749271, 30749272, 30749273, 30749274 Auxiliary seat M8901699 Volvo Car Corporation Auxiliary seat-
More informationGripper pneumatici B32 Pneumatic grippers B32
Caratteristiche principali: - Corpo in acciaio - Irreversibilità della posizione di bloccaggio - Bracci in acciaio tipo A e B - 4 tipologie di attacchi - Cilindro pneumatico alesaggio 32 mm - 2 fori di
More informationGILDEMEISTER AS16 - AS20 - GS20 - GM20
CAMME STANDARD PER SLITTE RADIALI STANDARD CAMS FOR CROSS SLIDES CAMME STANDARD PER SLITTE ASSIALI STANDARD CAMS FOR AXIAL SLIDES POS. 1 08.29.105 08.29.106 08.29.107 08.29.111 08.29.117 16.29.301 POS.
More informationFord Raptor Venom Front Bumper Installation Instructions
PREPARATION 2010 2014 Ford Raptor Venom Front Bumper Installation Instructions 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency brake. 2. We recommend
More informationMain Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00
More informationThis instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently.
This instruction manual is an in-depth look and explanation of how to assemble and install the Murphy Bed properly and efficiently. Don t be put off by the size of the instruction manual as the large diagrams
More informationS48-L12-SC AND G48-L12-GC STEEL PORTA-DOCK S82 SC 6 X 12 PLATFORM AND G82 GC 6 X 12 PLATFORM
PAGE 1 OF 6 PORTA-DOCK, INC. S48-L12-SC AND G48-L12-GC STEEL PORTA-DOCK S82 SC 6 X 12 PLATFORM AND G82 GC 6 X 12 PLATFORM Thank you for purchasing our product! *Please read these instructions and follow
More informationAUTO STABILIZING AND LEVELLING SYSTEM
Installation Manual Make sure the caravan is parked in a safe place. Make sure the caravan brake is on. Remove all 4 corner steady legs from the caravan. Remove the corner steady legs by removing the 3
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More informationSection D ACCELERATOR
Section D ACCELERATOR 1D Index No. Part No. Description 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm x 21 mm x 2 mm) 4.
More informationINSTALLATION INSTRUCTIONS KK-K9-F14-K K9 KIT FOR FORD EXPEDITION
INSTALLATION INSTRUCTIONS KK-K9-F14-K-32 32 K9 KIT FOR 2003-2016 FORD EXPEDITION TOOLS REQUIRED: Power Drill Drill Bit Set Standard & Metric Socket Sets Phillips Screw Driver Open End Wrench Set Wire Cutters
More informationPD Pedestal Drill - Belt Drive 28mm Drill Capacity 3MT
PD-440 - Pedestal Drill - Belt Drive 28mm Drill Capacity 3MT Ex GST Inc GST $780.00 $858.00 ORDER CODE: MODEL: Type - Bench / Pedestal : Duty Type: Drill Capacity (mm): Spindle Taper (MT): D598 PD-440
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 645 For Chevrolet Silverado 500HD & 3500 This WARN Trans4mer system can be customized to give your Chevy Silverado a wide variety of looks,
More information3. Barrier elements. Barrier posts. Stainles steel
3. Urban Equipment Building Equipment Stainles steel e 3.1 Tubular hoops 216-223 3.2 Access barriers 224-227 3.3 Height restriction barriers 228-231 3.4 Protective railing 232-237 3.5 City fence 238-240
More informationRBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
More informationHITCH MOUNT BICYCLE CARRIER Model BC-102
HITCH MOUNT BICYCLE CARRIER Model BC-102 MAXIMUM LOADING CAPACITY 60 LBS Recommended Tools for Assembly: Open Wrench (2 pc.) Open Wrench (2 pc.) Open Wrench (2 pc.) Size=17mm Size=19mm Size=24mm Assembly
More informationAL Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand
AL-336 - Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: MODEL: L682 AL-336 Swing Over Bed (mm): 300 Distance Between Centres (mm): 900 Spindle
More informationLifeGear G1 /HOME GYM ITEM NO.: 63100
LifeGear G1 /HOME GYM ITEM NO.: 63100 OWNER S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product
More informationJK FRONT DAGGER FRAME CHOP BUMPER INSTALLATION INSTRUCTIONS
JK FRONT DAGGER FRAME CHOP BUMPER INSTALLATION INSTRUCTIONS TOOLS NEEDED 18mm socket or wrench Paint marker 10mm wrench & socket Tape measure Sawzall, or die grinder 15mm socket HARDWARE 4-1/2 X 5.5 Grade
More informationIllustrated Pats List
Illustrated Pats List Automatic Lawn Tractor Models 0 0 0 Model 0 Shown IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine and should
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP20 & SPC20 SP20 0--2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationArc Trainer Main Frame Assembly
Arc Trainer Main Frame Assembly Kit No. 610AK019-4 Kit No. 630AK019-4 NOTE: This instruction sheet describes how to replace the main frame assembly in the Arc Trainer 610A. Tools Required 3/16 Allen wrench
More informationHardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers
Hardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers Hinge 0 Nuts - Spring Bolt 0 Washers Bolts - Hinge 0 Contents Self tapping & wood screws, Spirol and locking pins & rivets
More informationOperating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationEndless rope making machine
PL Endless rope making machine VERSION 3.2 ShipWorkshop.com Read this before getting started. The design of the machine may differ from that shown in this manual. If necessary, remove the protective film
More informationParts Catalog Collector 34 Model Gasoline
Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-10)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering V (97104640)... 10 Travel drive, part 1
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODEL: SP60 & SPC60 SP60 0-2-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More information>> ACCESSORIES 5 2 METALPLAST-SOPRANA
CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE 127013
More informationEEBR312A Brake Lathes Parts Identification
EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference
More informationALDoor DOUBLE DOOR INSTALLATION
Assembly Top Jamb Side Jamb Horizontal Vertical Vertical Jamb Brackets General Layout 15-20 mm Red (LHS) Cable Drum Red Cone Black Cone Black (RHS) Cable Drum 75 mm Minimum Left Hand Side Bearing Plate
More informationParts list Instruction guide Warnings Please read carefully before assembling and using product.
Parts list Instruction guide Warnings Please read carefully before assembling and using product. Jet Rail XL Part Number 27377 Tools required for assembly Hammer 9/16 Wrench 3/4 Wrench Ratchet 9/16 Socket
More informationPARTS LIST GALAXY FLOOR MACHINE
PARTS LIST GALAXY FLOOR MACHINE ITEM PART NO. DESCRIPTION QTY 101 0393051 SAFETY DECAL 1 102 0393691 IDENTIFIER DECAL - GALAXY 1 103 0393351 SWITCH BOX COVER 1 104 0393531 DECAL 1 105 0393441 HANDLE GRIP
More information