GF 12II. Parts Manual MODEL: Aug 2001 P/N Rev B A10605

Transcription

1 GF 12II MODEL: 3120 Parts Manual A10605 Aug 2001 P/N Rev B

2 TABLE OF CONTENTS GENERAL INFORMATION... 2 FINAL ASSEMBLY... 4 DOOR ASSEMBLY... 6 Coin Insert Assembly... 8 Delivery Assembly Light Assembly POWER PANEL ASSEMBLY TRAY ASSEMBLY CABINET ASSEMBLY GENERAL INFORMATION You may order parts from your distributor or from VendNet. If you have any questions when placing your order, please call and we ll be happy to assist you. Please provide the following information when placing your order: Quantity Required Part Number Description of part NOTE When Right and Left are used with a part name, it is taken to mean that the person is facing the front of the machine with the door closed. Vendor Model Number Vendor Serial Number Shipping and Billing Address Preferred Method of Shipment Customer Account Number MINIMUM ORDER: You may wish to inquire on prices of parts and minimum order amount at the time of your order. If you order less than the minimum, please check our catalog for other parts you may require to bring your order up to the minimum amount. PAYMENT: VendNet reserves the right to change these requirements without notice. OPEN ACCOUNT with approved credit. MASTER CARD VISA DISCOVER C.O.D. TO ORDER BY MAIL: You may mail your order for replacement parts by providing the necessary information as requested above to: VendNet 165 North 10th Street Waukee, Iowa USA Order forms are available upon request or you may use your own purchase order form. 2

3 TO ORDER BY FAX You may Fax your order for replacement parts by providing the necessary information as requested above to: VendNet TO ORDER BY PHONE You may call in your order for replacement parts by providing the necessary information as requested above to VendNet Parts Department. USA Canada Other locations RETURNS RESTOCKING CHARGE 20%. A restocking charge of 20% will apply to merchandise accepted by VendNet for return, except items processed as warranty. A Return Form clearly stating the reason for return must accompany all items returned. Returns are to be shipped freight prepaid to VendNet, 165 North 10 th Street, Waukee, Iowa (Return Forms are available upon request from VendNet.) LIMITATION OF LIABILITY VendNet shall not be liable for any injury, loss or damage, whether direct, incidental or consequential arising out of the use of or the inability to use any part, parts or products sold by VendNet. The remedies of the buyer set forth herein are exclusive, and the liability of VendNet. With respect to any contract or sale or anything done in connection herewith, whether in contract, in tort, under any warranty, or otherwise, shall not, except as expressly provided herein, exceed the price of the part, parts or products on which such liability is based. Any statements or representations about the parts or product, other than those contained herein, do not constitute warranties and shall not be relied on by the buyer and shall have no force of effect unless contained in a written agreement signed by officers of VendNet. If you have any questions, check out our Website or please call VendNet. Ask for the Parts Department. We will be happy to assist you. vendnet@vendnetusa.com 3

4 FINAL ASSEMBLY A

5 Final Assembly ITEM PART NO. QTY DESCRIPTION Door Assembly Page Door Decal Validator MDB GX 1 Coin Mechanism MDB Lock Cylinder w/2 Keys (Specify Key Series) Cabinet Assembly Page /16-18x3/4 Carriage Bolt Hinge Stake Top /16-18 Flange Lock Nut /16-18 x 3/4 Hex Washer Head Type D Hinge Stake Bottom /8 Nylon Flat Washer Leg Leveler Power Cord Power Cord Tag (Warning-Proper Ground) Service Package Service Manual GF12II, GF19II, GF35II Safety Manual Bulletin Scroll Locks Items placed in bottom of machine (See Tray Assembly Page 14) Spacer Spacer Support Spring Clip inch Leg Kit (Option) Leg Assembly /16 x 18 x 1 Bolt (Thread Roller) Leg Spacer Leg Leveler 5

6 DOOR ASSEMBLY A

7 ITEM PART NO. QTY DESCRIPTION Door Assembly Door /4 x 1/2-in. Foam Tape A/R Gasket 1/4 x 3/4-in. W/Adhesive ft Trim-Lok (Black) Glass Gasket Display Window Window Retainer Door Partition Left Door Partition Right Bottom Door Deflector Delivery Assembly - See Page Light Assembly - See Page /4 Turn Handle, Black x 1/2 in. Flat Head Machine Screw, Philips Nut, Two Way Lock 16 1 Coin Insert Assembly See Page Push Button Keypad Assembly Keypad Keypad Mounting Plate Locking Clamp 3/4-in Readout Window (Red) Control Board Mount Control Board Standoff-3/8-in A/R 8-32 Hex Nut W/External Tooth Washer F80 Control Board Control Board Cover Service Mode Label Door Harness A/R 8-18 x 3/8-in. Hex Washer Head Screw, Philips Plastic Wire Clamp 1/2 x 1-in #8 External Tooth Lockwasher Used with ground wire 7

8 DOOR ASSEMBLY (continued) Coin Insert Assembly A

9 ITEM PART NO. QTY DESCRIPTION Coin Insert Assembly Coin Insert (Black) (1 1/8-in. Slot) Coin Return Button Coin Cup Bezel Coin Cup Door Coin Cup /4-in. Stamped Hex Nut Mechanism Mount Latch /8 x 1/4-in. Aluminum Pop Rivet Coin Box - Plastic Nut-Two Way Lock Bushing-Spacer x 3/8 Pan Head Machine Screw - Philips Coin Return Lever Coin Chute Mount Spring 9/32 x 1 3/32-in Coin Chute Coin Insert Mount x 3/16-in. Pan Head Screw, Type-B - Philips Hex Nut W/External Tooth Washer A/R 8-18 x 3/8-in. Pan Head Screw, Type-AB - Philips Coin Box Lock (Optional) 9

10 DOOR ASSEMBLY (continued) Delivery Assembly A

11 Delivery Assembly ITEM PART NO. QTY DESCRIPTION Complete Delivery Assembly Delivery Box Rear Delivery Deflector Side Delivery Mount x 3/8-in. Pan Head Screw, Type-AB, Philips Type 7 Nyliner-Snap in Plastic Bushing Cam/Rod Delivery Anti-Cheat #8 Flat Washer x 3/8-in. Pan Head Screw, Type-T, Philips Follower Follower Bushing E-Ring 5/16-in Delivery Door Delivery False Box 11

12 DOOR ASSEMBLY (continued) Light Assembly A10567 ITEM PART NO. QTY DESCRIPTION Light Assembly Light Reflector Starter Socket Starter FS Lamp Socket Lamp - F14T8/Cw Lamp Harness Press Clip-1/4-in. 12

13 POWER PANEL ASSEMBLY A10186 ITEM PART NO. QTY DESCRIPTION Power Panel Assembly Volt Power Panel Harness Power Panel Switch Rocker Amp Circuit Breaker x 3/8-in. Pan Head Machine Screw, Philips #8 External Tooth Lockwasher Hex Nut W/External Tooth Washer Transformer 110 Volt Ballast - SP Closed End Splice Cap Plastic Cable Tie 7 3/8-in. 13

14 TRAY ASSEMBLY A10564 Tray Configurations 14 PART NO. QTY DESCRIPTION Tray Configuration Tray Assembly 2-10 Select Auger (Candy) Tray Assembly 1-15 Select Auger (Candy), 1-10 Select Auger (Snack) Tray Assembly 1-15 Select Auger (Candy), 1-12 Select Auger (Snack) Tray Assembly 1-18 Select Auger (Candy), 1-12 Select Auger (Snack)

15 ITEM PART NO. QTY DESCRIPTION Tray Assembly Product Tray Motor Mount, Black Clamp 3/8 x 7/16-in A/R 8-18 x 1/2in. Pan Head Type-B, Philips Tray Harness A/R 24 VDC Motor Degree A/R Auger Coupling A/R Auger - 10 Select - Candy A/R Auger - 15 Select - Candy A/R Auger - 12 Select - Snack A/R Auger - 18 Select - Candy A/R Auger - 10 Select - Snack A/R Product Pusher/Ejector A/R Product Divider A/R Price Scroll by Label Holder Selection Identification Label Arrow Clip Tray Rail - Left Side Tray Rail - Right Side A/R Helix Retainer Tray Deflector (Used on bottom tray only) A/R 8-18 x 1/4-in. Hex Washer Head Type B, Philips (Attaching Part for item 18) A/R Spring Clip A/R Spacer Support A/R Spacer A/R Snack to Split Auger 40 Kit (Optional) A/R 24 VDC Motor Degree - Gum & Mint A/R #8-32 x 1-1/4-in. Shoulder Screw A/R Gum & Mint Helix Tube A/R End Cap A/R Auger - 40 Select - Gum & Mint A/R Gum & Mint Spacer Strip A/R 1/32 x 3/8-in. Foam Tape, (Attaching Part for item 29) 15

16 CABINET ASSEMBLY 16 A10565

17 Cabinet Assembly ITEM PART NO. QTY DESCRIPTION Cabinet Assembly Cabinet Hole Plug 2-1/4-in Hole Plug 1/2-in Right Side Panel Rolled Split Spacer x 3/4-in. Pan Head Screw, Type-AB, Philips Back Rail Support x 1/2-in. Pan Head Screw, Type-B, Philips Screw Cover Left Side Panel Nut Mount Assembly Split Nut Assy x 3/8-in. Pan Head Screw, Type-B, Philips A/R 8-18 x 3/8-in. Pan Head Screw, Type-B, Philips Anti-Cheat Long Anti-Cheat Short Control Panel ft Edge Guard Cabinet Harness Power Panel Assembly See Page Plastic Cable Tie, 5-in #8 External Tooth Lock Washer (Used on Grounding Wire) Edge Guard 17

18

19

20 The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicabillity. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. VendNet 165 North 10th Street Waukee, Iowa United States of America B.DOC USA & Canada International Service (800) (515) Parts (888) Web Site