Designed by Robert Kaufman Fabrics

Transcription

1 Just STAR Kisses PARTY Designed by Robert Kaufman Fabrics Featuring Finished quilt measures: 56-1/4 x 56-1/4 For questions about this pattern, please Patterns@RobertKaufman.com.

2 Fabric and Supplies Needed Fabric amounts based on yardage that is 42 wide. Color Fabric Name/SKU Yardage Color Fabric Name/SKU Yardage A K WHITE 2-1/4 yards H K POOL FQ , *containing each of the following fabrics one fat bundle I K CORSAGE B AUI PINK J AUI BLUE C AUI BLUE K K SURF D AUI PINK L AUI PINK E AUI BLUE M K AZALEA F K CORNFLOWER Binding* K SURF *Also used for Fabric K 1/2 yard G K GUMDROP You will also need: 3-5/8 yards for backing Copyright 2017, Robert Kaufman For individual use only - Not for resale page 2

3 - Read through all of the instructions before beginning. - All of the seam allowances are 1/4 unless otherwise noted. - Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42 wide. - Right sides together has been abbreviated to RST. - Remember to measure twice and cut once! From Fabric A, cut: six 8-1/4 x WOF strips. Subcut: thirty-six 6 x 8-1/4 rectangles four 3-3/4 x WOF strips. Subcut: thirty-six 3-3/4 squares for the HSTs three 3-1/4 x WOF strips. Subcut: thirty-six 3-1/4 squares From Fabric B, fussy cut: four 5-3/4 squares From Fabric C, fussy cut: fi ve 5-3/4 squares From each of Fabrics D and E, cut: four 3-1/4 x 21 strips. Subcut: eighteen 3-1/4 squares From Fabric F, cut: two 3-3/4 x 21 strips. Subcut: ten 3-3/4 squares for the HSTs four 1-3/4 x 21 strips. Subcut: eight 1-3/4 x 5-3/4 rectangles From Fabric G, cut: two 3-3/4 x 21 strips. Subcut: eight 3-3/4 squares for the HSTs Notes Before You Begin Cutting Instructions page 3

4 From Fabric H, cut: one 3-3/4 x 21 strip. Subcut: four 3-3/4 squares for the HSTs two 3-1/4 x 21 strip. Subcut: eight 3-1/4 squares for the stitch-and-fl ip corners From Fabric I, cut: four 3-1/4 x 21 strips. Subcut: twenty-four 3-1/4 squares for the stitch-and-fl ip corners From Fabric J, cut: one 3-3/4 x 21 strip. Subcut: one 3-3/4 square for the HSTs Trim the remainder of the strip to 3-1/4 wide, then subcut: four 3-1/4 squares for the stitch-and-fl ip corners two 3-1/4 x 21 strips. Subcut: twelve 3-1/4 squares for the stitch-and-fl ip corners, for a total of sixteen eight 1-3/4 squares From Fabric K, cut: one 3-3/4 x 21 strip. Subcut: one 3-3/4 square for the HSTs Trim the remainder of the strip to 3-1/4 wide, then subcut: four 3-1/4 squares for the stitch-and-fl ip corners two 3-1/4 x 21 strips. Subcut: twelve 3-1/4 squares for the stitch-and-fl ip corners, for a total of sixteen From Fabric L, cut: one 3-3/4 x 21 strip. Subcut: four 3-3/4 squares for the HSTs two 3-1/2 x 21 strip. Subcut: eight 3-1/4 squares for the stitch-and-fl ip corners page 4

5 From Fabric M, cut: two 3-3/4 x WOF strips. Subcut: eight 3-3/4 squares for the HSTs one 1-3/4 x WOF strip. Subcut: From the Binding Fabric, cut: six 2-1/2 x WOF strips Prepare for HSTs and Stitch-and-Flip units On the wrong side of all 3-1/4 square stitch-and-fl ip units and all 3-3/4 Fabric A squares, mark a diagonal from corner to corner, in pencil. Set aside for Steps 1 and 4. Assemble the Half-Square Triangles (HSTs) Step 1: Pair a 3-3/4 Fabric A square with a 3-3/4 print or solid color square, RST. Sew 1/4 away from both sides of the marked line. Cut on the marked line, creating two half-square triangles (HSTs). Press toward the darker fabric. Trim to 3-1/4 square. Repeat with all 3-3/4 Fabric A squares to make a total of seventytwo HSTs. Assemble the Blocks Note: Block 1 is shown in the steps here. Construction for the remainder of the blocks uses the same process. Refer to the Quilt Assembly Diagram for the fabric placements and parings for the remaining blocks. Step 2: Gather four 1-3/4 x 5-3/4 Fabric F rectangles. Sew two to opposite edges of a Fabric C square. Press away from the center square. Step 3: Sew a 1-3/4 Fabric H square to opposite edges of the remaining two 1-3/4 x 5-3/4 Fabric F rectangles. Press toward the rectangles. Sew these units to the top and bottom edges of the center square. Press away from the center square. page 5

6 Step 4: Place one 3-1/4 Fabric I square in the top left corner of a 6 x 8-1/4 Fabric A rectangle, with the marked diagonal as shown. Sew on the marked line. Trim to leave a 1/4 seam allowance, then press the triangle toward the corner. Repeat with the top right corner of the Fabric A rectangle. Repeat to make four units like this. Step 5: Gather: completed Step 3 center unit four completed Step 4 units four 3-1/4 Fabric A squares four F/A HSTs two G/A HSTs two M/A HSTs two Fabric D squares two Fabric E squares Arrange to form Block 1, noting the orientation of the Fabric D and E squares and the placement of the HST colors. page 6

7 Step 6: Beginning in the top left corner, sew a four-patch unit, pressing the row seams away from the HSTs. Press the fi nal seam open. Repeat to create a total of four four-patch units. Step 7: Sew the block together in three rows of three, pressing the seams toward the 6 x 8-1/4 units. Sew the rows together, pressing the seams open or to one side. The resulting block will measure 19-1/4 square. Repeat Steps 2-7 to create Blocks 2-9. Note the fabric placement in each block, using the Quilt Assembly Diagram. page 7

8 Assemble the Quilt Step 8: Arrange the blocks into three rows of three blocks. Note the fabric placement and block orientation in the Quilt Assembly Diagram. Step 9: Sew the blocks together to form rows. Press the rows to the left in the odd numbered rows and to the right in the even numbered row. Step 10: Sew the rows together to form the quilt center. Press the row seams open. Your quilt top is complete! Baste, quilt, bind and enjoy! page 8