CAX DATA CONVERSION COM/FOX T-SYSTEMS PLM APPLICATIONS
|
|
- Sheena Atkins
- 5 years ago
- Views:
Transcription
1 CAX DATA CONVERSION COM/FOX T-SYSTEMS PLM APPLICATIONS
2 What if DIFFERENT CAX FORMATS COULD BE ORChEStRatED EaSiLY
3 CAx Data Conversion Content Overview Product characteristics Product modules Our expertise Our partners Our references Your benefit 8 Summary PLM Applications, CAx Data Conversion with COM/FOX September
4 CAD data Data exchange Visualization Virtual Reality Digital Factory COM/FOX Overview Architecture of multi format optimized exchange Geometry conversion Data Optimizer COM/FOX Kernel Solution: Modular and flexible software architecture. Ability for CATIA V5 and CGR format integration. Functionality: Handling of product structures. Support geometrical, topological and logistic information Conversion of Production planning information. Electrics Harness - Integration. Data optimization: Core removal capability, justification of normal vectors. Data reduction und optimization. 4
5 COM/FOX Overview Architecture and supported converting formats Reader Module Software kernel Writer Module CATIA V5 CGR CATIA V6 VDAFS STEP AP214 STEP AP203 STEP AP242 JT CATIA V4 MicroStation SAT IGES STL, VRML COM/FOX processor kernel STEP compliant kernel: Geometry Assembly Structures Tolerances (FT&A) Manufacturing Infos Wire Harness Electrics Information Kinematics etc Geometric Conversion Approximation/ Tessellation Seam Split DataOptimizer Data Reduction Normal Justification CATIA V5 CGR CATIA V6 VDAFS STEP AP214 KBL/AP212 STEP AP242 JT SAT IGES STL VRML 5
6 COM/FOX Product characteristics Robust and easy to use Large functionality for the conversions: Geometry, assembly structure, tolerances, manufacturing information, electrical information, etc. Available user interfaces are in CATIA V5 integrated and also external to the CATIA Session (Batch mode) Available on all CATIA V5 platforms Data exchange with EDM/PDM systems (Assemblies) Data conversion between CATIA V5 and standard data formats (e.g. VDAFS, STEP, JT,...) Interface for the digital factory for exchange of plant layout data (MicroStation from Bentley) 6
7 COM/FOX Modules Conversion from CATIA V5 to JT Conversion and optimization for Geometry Assembly structures Tolerances Manufacturing data 7
8 COM/FOX Modules Conversion from JT to CATIA V5 / CGR Conversion and optimization for Tessellated and exact geometry Visualization attributes Assembly structures (CATProduct) 8
9 COM/FOX Modules CATIA - JT Processor (1/2) Functional highlights Conversion of the complete CATIA V5 3D geometry Support of all geometric presentation attributes Conversion of hierarchical assembly structures to JT or (optionally) to PLMXML Geometric tolerances (CATIA FT&A) in CATParts and CATProducts with colors and preparation for filtering Associativity of tolerances (FT&A data) with model geometry and datums, highlighting like in CATIA V5 3D texts and dimensions Model views with clipping planes (Captures) Fasteners (welding points, welding seams) Conversion of surface models with material thickness 9
10 COM/FOX Modules CATIA - JT Processor (2/2) Functional highlights Support of Power Features Conversion of volume and area to JT Conversion of CATIA annotation planes JT Reader for tessellated and exact B-Rep data for JT CATIA V5, CGR support (e.g. for design in context ) CGR support read and write (for tessellated data in CATIA V5) 10
11 COM/FOX Modules CATIA - STEP Processor Functional highlights Support of various STEP Application Protocols: AP214 (import and export), AP203 (import) and VEC-KBL/AP212 (export) for ECAD/MCAD integration of wire harness information AP242 XML (import and export) for Product Structure and Kinematics with file references to JT Conversion of the complete CATIA V5 3D geometry Support of all geometric presentation attributes Conversion of hierarchical assembly structures 11
12 COM/FOX Modules Conversion of CATIA V5 Electrical Harness to VEC or KBL Conversion of wire harnesses with geometry, topology, parts references bundle segments and nodes modules and configuration 12
13 COM/FOX Modules CATIA to VEC or KBL Processor Functional Highlights Support of geometrical, topological and logical information Harness data (KBL subset of the Electric Vehicle Container VEC) Modules and configurations Parts (Single Insert Connectors, BackShells, Supports, Coverings) Bundle Segments Nodes (Connectivity) Support of KBL Version 2.2 and 2.3 and VEC V
14 COM/FOX Modules Conversion from MicroStation to CATIA V5 Conversion and optimization for Geometry Layout structures with integrated data reduction 14
15 COM/FOX Modules DatA optimization DataOptimizer functions work on COM/FOX Kernel Data reduction (by core removal) Justification of normal vectors All functions can run automatically and integrated into the data conversion. Realized in cooperation with infotec 15
16 COM/FOX T-Systems Expertise Standardization of VDAFS, VDAIS and STEP AP214 by our know-how and more than 12 years of experience. Implementation of system-neutral standards by our specialists in projects of the VDA and the ProSTEP-iViP Association. Membership in ProSTEP CAX and JT Implementor Forum Membership in JT Open Technical Review Board Qualified product support by the direct link to our development team. 16
17 COM/FOX T-Systems partners Partner of Dassault Systèmes: For COM/VDAFS CAA V5 based COM/FOX V5/V6 MultiCAx-JT Plug-in CATIA V5/V6 < > JT JT Open consortium membership (for interfaces to the JT Format) Partnership with Infotec GmbH: For modules for data reduction and optimization 17
18 COM/FOX T-Systems references COM/FOX offers the most powerful and flexible converter for creation of JT from CATIA V5 for our MultiCAD and Downstream use cases. Dr. Kai G. Schwebke, CoC EDM/Data Management, Daimler AG, Sindelfingen "Thanks to COM/FOX we can reduce development lead time, improve product quality and achieve global standardization. Akiyoshi Nagai, Honda Automotive R&D Center "COM/FOX is an optimal tool for the data conversion CATIA V5-JT and other important formats. The tool is fast and easy to install, easy to use and the support is excellent. Roland Traub, EADS-Astrium GmbH, Friedrichshafen 18
19 COM/FOX your benefit One data conversion solution for Digital Engineering Visualization (e.g. for drawing-less product development ) Virtual Reality ECAD/MCAD integration efactory (Digital Plant). Seamless data exchange by Support of various formats Data optimization (e.g. data reduction) Modular architecture and modular pricing model You pay only once for each input or output format Additional combinations of licensed input and output formats are available without additional costs Special conditions for DC suppliers with Tandem package 19
20 COM/FOX your benefit Improvement of your competitiveness by Closed process chains Unique approach within the design processes Low system costs by Smooth exchange of even complex assembly structures with CATIA V5 Support of various formats with an attractive pricing model Improvement of the collaboration with your partners 20
21 COM/FOX summary T-Systems COM/FOX offerings Leading data conversion solution by using all popular standards like STEP, VDAFS and different visualization formats like JT, CGR, VRML, STL, IV. Full integration into the CATIA V5 capability. Stable and established data conversion engine for the seamless data exchange. User friendly interfaces on all supported CATIA V5 platforms Special offers for Daimler suppliers through the CATIA V5 supplier package. 21
22 COM/FOX The best you can get for data conversion.
CMI CATIA TEAMCENTER INTEGRATION. CATIA V4/ V5 Teamcenter Enterprise Integration
CMI CATIA TEAMCENTER INTEGRATION CATIA V4/ V5 Teamcenter Enterprise Integration 1 T-SYSTEMS TEAMCENTER CATIA INTEGRATION CATIA TEAMCENTER INTEGRATION OVERVIEW Product since 1995 Teamcenter as global PDM
More informationCATIA Teamcenter Integration
CATIA Teamcenter Integration CMI Releases Functional Overview Copyright 2000, 2001, 2002, 2003, 2004, 2005 T-Systems International GmbH. All rights reserved. Printed in Germany. Contact T-Systems International
More informationMulti-CAD CATIA V5 Installation Guide. CATIA V5 Multi-CAD Products. Document Revision: 2.0 Issued: 05/12/2017
Multi-CAD CATIA V5 Installation Guide CATIA V5 Multi-CAD Products Document Revision: 2.0 Issued: 05/12/2017 THEOREM SOLUTIONS 2017 Contents Installation Instructions for CATIA V5 Multi-CAD Products...
More informationJT Format (ISO 14306) and AP 242 (ISO 10303): The Step to the Next Generation Collaborative Product Creation
JT Format (ISO 14306) and AP 242 (ISO 10303): The Step to the Next Generation Collaborative Product Creation Alfred Katzenbach 1, Sebastian Handschuh 2, and Steven Vettermann 3 1 Executive Consultant alfred.katzenbach@daimler.com
More informationCMI User Day - Product Strategy
CMI User Day - Product Strategy CMI User Day 2003 New Orleans, USA CMI User Day 2003 New Orleans, USA Tino Schlitt T-Systems PLM Solutions CATIA Metaphase Interface - Overview Integration of CATIA V4 /
More informationReference number of working document: ISO/IEC JTC 1/SC 24 N 000
Reference number of working document: ISO/IEC JTC 1/SC 24 N 000 Date: 2014-08-00 Reference number of document: Committee identification: ISO/IEC JTC 1/SC 24/WG 6 Secretariat: Information technology Computer
More informationLeverage 3D Master. Improve Cost and Quality throughout the Product Development Process
Leverage 3D Master Improve Cost and Quality throughout the Product Development Process Introduction With today s ongoing global pressures, organizations need to drive innovation and be first to market
More informationNew Trends in. Digital Reality. The Democratization of. Presenter: Trevor Leeson
New Trends in Digital Reality The Democratization of Digital Reality Presenter: Trevor Leeson GPDIS_2017.ppt 1 Presenter Biography Trevor Leeson Starting his engineering career working for an automotive
More informationCATIA V5R18 - FACT SHEET Strengthen Collaborative Solutions to Streamline Innovations
CATIA V5R18 - FACT SHEET Strengthen Collaborative Solutions to Streamline Innovations Introduction What s New at a Glance Overview Detailed Description INTRODUCTION CATIA V5 is the leading solution for
More informationCADValidator: A Critical Aid for the Model-Based Enterprise
CADValidator: A Critical Aid for the Model-Based Enterprise Abstract Learn the importance of validation for deployment of model-based engineering practices. In addition, understand what functionality is
More informationThe Importance of a Technical Data Package to Support 3D MBE. Glen Voglesong Faurecia Rahim Alsaffar Johnson Controls
The Importance of a Technical Data Package to Support 3D MBE Glen Voglesong Faurecia Rahim Alsaffar Johnson Controls Johnson Controls Automotive Agenda Introduction Information & Technology What s a TDP?
More informationMechanical Design. CATIA - Weld Design 1 (WD1) CATIA V5R18
Mechanical Design CATIA - Weld Design 1 (WD1) CATIA V5R18 Mechanical Design CATIA - Weld Design Design advanced welded products based on process definition and rules. Product overview CATIA - Weld Design
More informationMinimum Model-Based Definition (MBD) and Bill of Material (BOM) Definition
Minimum Model-Based Definition (MBD) and Bill of Material (BOM) Definition with STEP AP242 Problem Statement, Direction and Preliminary Requirements A&D PAG Position Paper (AD PAG PP01.1) December 2017
More informationServices Overview. Rand 3D offers training and software solutions for users of Dassault Systèmes products.
Services Overview Rand 3D offers training and software solutions for users of Dassault Systèmes products. Our Training Investment Backed by a team of subject-matter experts, technical training engineers,
More informationAutodesk Inventor LT. Easy as 1, 2, 3D.
Autodesk Inventor LT Easy as 1, 2, 3D. Model Your Part Designs in 3D With parametric 3D solid part modeling in Autodesk Inventor LT software, you can model your part designs in 3D instead of simply drawing
More informationPRODUCT RELEASE ANNOUNCEMENT
Product Category CADverter Product Group CATIA V5 for NX Release Version 18.2 Document Type Product Release Announcement Status Released Revision 2.0 Author Mark Stowe Issued 09/07/2015 THEOREM SOLUTIONS
More informationTest Suite for the CAx Implementor Forum Round 23J October 2008 March 2009
Passion for Results Test Suite for the CAx Implementor Forum Round 23J October 2008 March 2009 Release 1.1 February 9, 2009 Contacts: Jochen Boy PROSTEP AG Taunusstraße 42 80807 Munich, Germany jochen.boy@prostep.com
More informationProduct content. Common for both Research and Commercial Editions. Solidworks DCAD Matrix. Coimbatore Cad Solutions Pvt Ltd.
Product content Common for both Research and Commercial Editions Solidworks 2018 3DCAD Matrix Coimbatore Cad Solutions Pvt Ltd Page 1 of 7 3D CAD MATRIX SOLIDWORK PREMIUM PROFESSIONAL STANDARD Ease of
More informationSOLIDWORDS 3D CAD MATRIX
SOLIDWORDS 3D CAD MATRIX SOLIDWORKS PROFESSIONA L SOLIDWORKS PREMIUM Ease of Use Learn Fast: InContext and Toolbar Menus, Command Search, BuiltIn Tutorials, Searchable Help Documentation SOLIDWORK S STANDARD
More informationDrivetrain for Vehicles 2018
Drivetrain for Vehicles 2018 presentation of an innovation RoBoC = Roll Bond Core ADVANTAGES OFFER RoBoC - Keep the stator housing battery housing power unit housing junction box and other similar applications
More informatione!cmi - web based CATIA Metaphase Interface
e!cmi - web based CATIA Metaphase Interface e!cmi Release 2.0 for CF2.0 User s Manual Copyright 1999, 2000, 2001, 2002, 2003 T-Systems International GmbH. All rights reserved. Printed in Germany. Contact
More informationDassault Systèmes at Hannover Messe 2018: Storyline
Dassault Systèmes at Hannover Messe 2018: Storyline "IF partnerships are the heart of the industry renaissance WE need new ways of working together" While Industry 4.0 describes the digital transformation
More informationMulti-CAD for CATIA V5 CREO Product Range MC5CRE. Product Release Version 19.3 USER GUIDE
Multi-CAD for CATIA V5 CREO Product Range MC5CRE Product Release Version 19.3 USER GUIDE Revision: 1.0 Issued: 23/09/2016 Contents Overview of Multi-CAD... 3 About Theorem...3 What is Multi-CAD?...3 The
More informationMore Light and Speed in Production Control CORE
More Light and Speed in Production Control CORE CORE The Centre for Production Metrology Developed to speed production, CORE provides the ultimate in flexible 3D inspection solutions for advanced part
More informationLockheed Martin Aeronautics CMI Implementation on JSF Glenn Hayhurst 05/2004
Lockheed Martin Aeronautics CMI Implementation on JSF Glenn Hayhurst 05/2004 About Lockheed Martin Aeronautics Company builds the finest military aircraft in the world. C-130J C-27J T-50 F-2 F-16 F-117
More informationStandards-Based Interoperability for Design to Manufacturing and Quality in the Supply Chain Part 2
Standards-Based Interoperability for Design to Manufacturing and Quality in the Supply Chain Part 2 Asa Trainer GPDIS2017 Phoenix, AZ Sep 2017 GPDIS_2017.ppt 1 Introduction International TechneGroup Incorporated
More informationUsing open CAD formats to bridge the gap between today s and tomorrow s standards CAPVIDIA Tomasz Luniewski
Using open CAD formats to bridge the gap between today s and tomorrow s standards CAPVIDIA Tomasz Luniewski GPDIS_2012.ppt 1 CAPVIDIA Founded in 1994 (Belgium, Russia, USA, China, Japan) Development of
More informationRecommended Practices for Geometric Dimensions & Tolerances (GD&T)
Recommended Practices for Geometric Dimensions & Tolerances (GD&T) Polyline Presentation Release 1.0 Contacts: June 16, 2008 Jochen Boy PROSTEP AG Taunusstraße 42 80807 Munich / Germany jochen.boy@prostep.com
More informationMechanical Design CATIA - Sheetmetal Design 2 (SMD) CATIA V5R20
Mechanical Design CATIA - Sheetmetal Design 2 (SMD) CATIA V5R20 Mechanical Design CATIA - Sheetmetal Design Designs sheet metal parts in a very intuitive and productive environment Product overview CATIA
More informationCharting the transition between Engineering Specifications, the 3D Model and Inspection through Quality Reporting. Glen Voglesong
Charting the transition between Engineering Specifications, the 3D Model and Inspection through Quality Reporting Glen Voglesong 2017 10 5 The power computer modeling: connecting tools and their functional
More informationMechanical Design. CATIA - 3D Functional Tolerancing and Annotations 2 (FTA) CATIA V5R20
Mechanical Design CATIA - 3D Functional Tolerancing and Annotations 2 (FTA) CATIA V5R20 Mechanical Design CATIA - 3D Functional Tolerancing and Annotations Define and manage tolerance specifications and
More informationModel-Based Definition using Creo Parametric and GD&T Advisor
Model-Based Definition using Creo Parametric and GD&T Advisor Ted Anderson Product Line Manager Sigmetrix, LLC Model-Based Definition What is it? Why Model-Based Definition? What tools are required to
More informationGenerative Drafting Overview What's New Getting Started User Tasks
Generative Drafting Overview Conventions What's New Getting Started Defining the Drawing Sheet Part Drawing Opening a Part Creating a Front View Creating a Projection View Creating a Section View Creating
More informationFARO Technical Seminar Spar 2006, Houston
FARO Technical Seminar Spar 2006, Houston Martin Cooper O.I.L. Engineering Houston, Tx. Dr. Bernd Becker FARO Technologies Stuttgart Germany Content Application of the FARO Laser Scanner in Petrochemical
More informationArch Bridge in Nijmegen - new 3D Approach to Workshop Plans
Available online at www.sciencedirect.com Procedia Engineering 40 (2012 ) 114 118 Steel Structures and Bridges 2012 Arch Bridge in Nijmegen - new 3D Approach to Workshop Plans D. Franc a and A. Pechal
More informationThe value of VR for professionals. Sébastien Cb MiddleVR.com
The value of VR for professionals Sébastien Cb Kuntz CEO @SebKuntz @MiddleVR MiddleVR.com Virtual reality for professionals Team of VR experts Founded in 2012 VR Content creation professional services
More informationGETTING YOUR DIGITAL HOUSE IN ORDER
GETTING YOUR DIGITAL HOUSE IN ORDER STREAMLINING THE MBD AND DETAILING PROCESS WITH CREO Martin Neumüller Creo Product Management PTC Eindhoven, 2017 AGENDA 1. MBD opportunities and challenges 2. Creo
More informationCADverter for CATIA V5 - NX. Product Release Version USER GUIDE Revision: 1.0 Issued: 02/03/2016
CADverter for CATIA V5 - NX Product Release Version 19.4 USER GUIDE Revision: 1.0 Issued: 02/03/2016 THEOREM SOLUTIONS 2017 Contents Overview of CADverter... 3 About Theorem...3 What is CADverter?...3
More informationCATIA V5.18 strengthens collaborative solutions to streamline innovation
IBM Europe Announcement ZP07-0360, dated September 25, 2007 CATIA V5.18 strengthens collaborative solutions to streamline innovation Description...3 Product positioning... 7 Reference information... 8
More informationMechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20
Mechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20 Mechanical Design CATIA - Interactive Drafting Address 2D design and drawing production requirements. Product overview Interactive Drafting
More informationCOMPANY PRESENTATION. engine for life
COMPANY PRESENTATION engine for life The MATADOR Group History Establishment of MATADOR Automotive Czech Republic Beginning of tire production in Púchov Acquisition of MATADOR Automotive Vráble Rubber
More informationFACADE: Future-proofing Architectural Computer-Aided DEsign
FACADE: Future-proofing Architectural Computer-Aided DEsign MacKenzie Smith Associate Director for Technology, MIT Libraries Principal Investigator, MIT FACADE Project MIT FACADE Project Develop Long-Term
More informationPress Release 19 December 2017
3 rd Symposium on Driving Simulation Experts discuss the technical progress of driving simulation en route to autonomous driving Fellbach/Stuttgart, - Around 75 participants gathered in Braunschweig on
More informationCOMPANY PRESENTATION. engine for life
COMPANY PRESENTATION engine for life The MATADOR Group History Establishment of MATADOR Automotive Czech Republic Beginning of tire production in Púchov Acquisition of MATADOR Automotive Vráble Rubber
More informationModel Based Definition The future mode of product TPD
Model Based Definition The future mode of product TPD 11-10- 2018 Leo Broers Project Manager ASML QC DE CSI ASML organization Slide 2 Lithography is the critical tool for producing chips All of the world
More informationVirtual Foundry Modeling and Its Applications
Virtual Foundry Modeling and Its Applications R.G. Chougule 1, M. M. Akarte 2, Dr. B. Ravi 3, 1 Research Scholar, Mechanical Engineering Department, Indian Institute of Technology, Bombay. 2 Department
More informationComputer Aided Design and Engineering (CAD)
Oakland Community College 2017-2018 Catalog 1 Computer Aided Design and Engineering (CAD) CAD 1050 Geometric Dimensioning and Tolerancing (GD&T) This course is designed to cover the fundamentals as well
More informationProposal for the Conceptual Design of Aeronautical Final Assembly Lines Based on the Industrial Digital Mock-Up Concept
Proposal for the Conceptual Design of Aeronautical Final Assembly Lines Based on the Industrial Digital Mock-Up Concept Fernando Mas 1, Alejandro Gómez 2, José Luis Menéndez 1, and José Ríos 2 1 AIRBUS,
More informationCATIA V5.17 boosts innovation for product excellence
Software Announcement September 5, 2006 CATIA V5.17 boosts innovation for product excellence Overview Integrated portfolio supports seamless industry processes CATIA V5.17 strengthens the integration between
More informationCOMOS Walkinside 10.2
COMOS Walkinside 10.2 Why Immersive Training? Knowledge retention through learning Leverage the power of: Human graphic memory from 3D contextual simulations Repetition of scenario-driven work tasks Time-scale
More informationCourse Summary. CLASSROOM: On-site Instructor-led Education WEBINAR: Instructor-led On-line Training ON-DEMAND: Virtual Self-Paced Learning
Course Summary CLASSROOM: On-site Instructor-led Education WEBINAR: Instructor-led On-line Training ON-DEMAND: Virtual Self-Paced Learning NO. COURSE NAME CLASSROOM* WEBINAR ON-DEMAND MBD/MBE EDUCATION
More information4. GAMBIT MENU COMMANDS
GAMBIT MENU COMMANDS 4. GAMBIT MENU COMMANDS The GAMBIT main menu bar includes the following menu commands. Menu Item File Edit Solver Help Purposes Create, open and save sessions Print graphics Edit and/or
More informationSolar Tower Technology Made in Germany Joint Saudi-German CSP Workshop
Solar Tower Technology Made in Germany Joint Saudi-German CSP Workshop Solar Tower Technology Made in Germany 2 Companies not present at the Workshop Leoni AG is one of the leading suppliers of cabeling
More informationEratz VeraCAD 4.0. New features and improvements in VeraCAD 4.0
New features and improvements in VeraCAD 4.0 In VeraCAD 4.0 the user interface has been completely redeveloped and raised to a state of the art standard. So far VeraCAD was operated by pop-up windows mostly,
More informationNX, M-CAD BSH NX Method - Core Architecture User Guide
BSH NX Method - Core Architecture User Guide BSH Engineering Design Process / BSH NX M-CAD / NX10 / Method / Responsible Party - BSH GST Product Master Data Preface Siemens PLM NX is the corporate key
More informationSmart Products and Digital Industry Prof. Dr.-Ing. Dietmar Goehlich
Smart Products and Digital Industry Prof. Dr.-Ing. Dietmar Goehlich Technische Universität Berlin Faculty of Mechanical Engineering and Transport Systems Methods for Product Development and Mechatronics
More informationCOURSE CONTENTS FOR THE AVTS COURSES
Revision: 00 LEARNING CONTENT Page 1 of 14 COURSE CONTENTS FOR THE AVTS COURSES AT CAD- CAM LAB, ATI, VIDYANAGAR, HYDERABAD Revision: 00 LEARNING CONTENT Page 2 of 14 III COURSE CODE CAD-01 IV COURSE TITLE
More informationAutodesk Inventor 6 Essentials Level II Course Outline
Autodesk Inventor 6 Essentials Level II Course Outline Overview This course outline is designed for a recommended three-day course for providing instruction on how to use the more advanced functionalities
More informationTHINK IN NEW DIMENSIONS. Software & Services for Industrialised Construction
THINK IN NEW DIMENSIONS Software & Services for Industrialised Construction O P E N B I M Integrated planning The objective of an integrated planning is the consistency of data and information throughout
More informationSTEP for E-Manufacturing: Concepts and Applications
STEP for E-Manufacturing: Concepts and Applications Azwan Iskandar Azmi, Abd. Nasir Zulkifli, Ezanee M. Elias and Ruslizam Daud Management of Technology Department, Faculty Management of Technology Universiti
More informationThree Steps to Dynamic View for BIM Applications
Three Steps to Dynamic View for BIM Applications The process of creating and using dynamic views can seem daunting to even the most experienced user. The Bentley BIM applications provide tools to somewhat
More informationfiltertechnik.europe Better Function in Metal Mesh
filtertechnik.europe Better Function in Metal Mesh News Update I/2017 Digital is coming Through our platform News Update we keep you - our partners - updated on current activities and developments around
More informationSharing Data Between CAD and GIS Systems. Lien Alpert Phil Sanchez
Sharing Data Between CAD and GIS Systems Lien Alpert Phil Sanchez Session Overview Discuss current CAD strategies Outline ESRI s CAD support Demonstrate techniques for working with CAD data CAD Strategies
More informationsheet metal forming Simufact.forming The simulation solution for bulk sheet metal forming
Simufact.forming The simulation solution for bulk Simulating Manufacturing Optimized forming processes Extended tool life time Efficient utilization of machine capacity Minimal material scrap and waste
More information» Facing the Smart Future «
Industrie 4.0 Internet of Things» Facing the Smart Future «Smart Products, Production and Services Internet of Services Industrial Internet Digital Manufacturing Call for Partners: Consortium Study Our
More informationLeading in drainage. Made in Germany
Made in Germany Leading in drainage 2 Overview SmartServices KESSEL AG KESSEL SmartServices Operation Design Installation Our digital services offer With KESSEL SmartServices the future has already arrived
More informationMore Efficient and Intuitive PLM by Integrated AR/VR. Round Table Session Georg Fiechtner
More Efficient and Intuitive PLM by Integrated AR/VR Round Table Session Georg Fiechtner Service Portfolio PLM Consulting PLM Software Development Human- System Interaction AMS Processes Systems Technologies
More informationMoving Manufacturing to the Left With Immersion Technology ESI IC.IDO
Product Lifecycle Manufacturing With Immersion Technology ESI IC.IDO A presentation of IC.IDO, leading decision-making platform based on virtual reality Tony Davenport Manager, Aerospace & Defense ESI
More informationDrawing Module, Import-Export
Drawing Module, Import-Export construction modelling systems www.comosys.com Save Time & Money In the engineering & design business one of the biggest issues is man-hours. How to get work done quickly
More informationSensitivity analysis of several body-in-white single part and assembly parameters using tolerance analysis
assembly parameters using tolerance analysis Litwa, Frank 1, Gottwald Martin 1, Vicent Gascó 1, Vielhaber Michael 2 1 Daimler AG, Sindelfingen, Germany 2 Institute of Engineering Design Saarland University,
More informationAN APPROACH FOR THE IMPLEMENTATION OF THE DIGITAL TWIN IN THE AUTOMOTIVE WIRING HARNESS FIELD
INTERNATIONAL DESIGN CONFERENCE - DESIGN 2018 https://doi.org/10.21278/idc.2018.0188 AN APPROACH FOR THE IMPLEMENTATION OF THE DIGITAL TWIN IN THE AUTOMOTIVE WIRING HARNESS FIELD R. Tharma, R. Winter and
More informationComputer Aided Drawing: An Overview
Computer Aided Drawing: An Overview Dr. H. Hirani Department of Mechanical Engineering INDIAN INSTITUTE OF TECHNOLOGY BOMBAY Powai, Mumbai-76 hirani@me.iitb.ac.in Drawing: Machine/ Engineering/ Technical
More informationASME B18 Digital Fastener Library The first ASME standard represented digitally
ASME B18 Digital Fastener Library The first ASME standard represented digitally, LLC Content Who is PARTsolutions? Introduction of the ASME new PIN system Capabilities and Benefits of the Digital Library
More informationCREO 4.0: MODEL BASED DEFINITION (MBD)
CREO 4.0: MODEL BASED DEFINITION (MBD) Raphael Nascimento Product Manager PTC Creo 17 November, 2016 PTC Forum Europe Stuttgart, Germany Model Based Definition (MBD) AGENDA GD&T Advisor Questions? 2 Model
More informationNIST MBE PMI Validation & Conformance Testing CTC Model Verification Results February 2015
YOUR CENTRAL SOURCE FOR DATA EXCHANGE NIST MBE PMI Validation & Conformance Testing CTC Model Verification Results February 2015 Doug Cheney CAD Validation Specialist ITI TranscenData Doug.Cheney@TranscenData.com
More informationResearch on aircraft components assembly tolerance design and simulation technology
3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015) Research on aircraft components assembly tolerance design and simulation technology Wei Wang 1,a HongJun
More informationCOMPUTER AIDED TRADITION JIGS AND FIXTURES DESIGN
8 Military Technical College Kobry El-Kobbah, Cairo, Egypt. 17 th International Conference on Applied Mechanics and Mechanical Engineering. COMPUTER AIDED TRADITION JIGS AND FIXTURES DESIGN H.M.A Hussein
More informationWE Kunststoff-Technik GmbH WE System GmbH KHL Interior GmbH
We shape your ideas. WE Kunststoff-Technik GmbH WE System GmbH KHL Interior GmbH TOOL MANUFACTURING INJECTION MOLDING assembly CABLE ASSEMBLY LAMINATIONS EXPERTISE We offer: Individually manufactured plastic
More informationHARTING Coaxial and Metric Connectors
HARTING Coaxial and Metric Connectors HARTING Worldwide Transforming customer wishes into concrete solutions The HARTING Technology Group is skilled in the fields of electrical, electronic and optical
More information» Facing the Smart Future «Big Data
» Facing the Smart Future «Big Data Smart Products, Production Processes and Services Call for Partners: Consortium Project Our Expert Network: Smart Products, Production Processes and Services Motivation
More informationFinite Element & Boundary Element Technology in Acoustics & Structural Dynamics : Current Status & Key Trends for the Future
Industry Sector RTD Thematic Area Date Deliverable Nr Land Transport & Aerospace Multi-Physics 13-Nov-01 Finite Element & Boundary Element Technology in Acoustics & Structural Dynamics : Current Status
More informationATHENA2014. Drawing, planning, designing be even more productive with the new upgrade! Really fast! Really good!
ATHENA2014 Drawing, planning, designing be even more productive with the new upgrade! Really fast! Really good! With the development of the ATHENA 2014 Upgrade the emphasis this time is on increasing productivity.
More information3DS Learning Solutions Course Catalog
Course Catalog V5 2007-2015 Dassault Systèmes - All rights reserved No part of this publication may be reproduced, translated, stored in retrieval system or transmitted, in any form or by any means, including
More informationComputer-aided analysis of ultrasound data to speed-up the release of aerospace CFRP components
Computer-aided analysis of ultrasound data to speed-up the release of aerospace CFRP components Silvère BARUT (1), Vincent BISSAUGE (2), Wayne CLAASSENS (3), Guillaume ITHURRALDE (1,2) & Sébastien Rolet
More informationVirtual Prototyping State of the Art in Product Design
Virtual Prototyping State of the Art in Product Design Hans-Jörg Bullinger, Ph.D Professor, head of the Fraunhofer IAO Ralf Breining, Competence Center Virtual Reality Fraunhofer IAO Wilhelm Bauer, Ph.D,
More informationDesigning in Context. In this lesson, you will learn how to create contextual parts driven by the skeleton method.
Designing in Context In this lesson, you will learn how to create contextual parts driven by the skeleton method. Lesson Contents: Case Study: Designing in context Design Intent Stages in the Process Clarify
More informationI++ Simulator. Online simulation in the virtual laboratory
ProduCT BROCHURE I++ Simulator Online simulation in the virtual laboratory I++ Simulator Realistic planning, effective programming, dynamic documentation and cost-effective analysis The I++ Simulator is
More informationWeb3D Standards. X3D: Open royalty-free interoperable standard for enterprise 3D
Web3D Standards X3D: Open royalty-free interoperable standard for enterprise 3D ISO/TC 184/SC 4 - WG 16 Meeting - Visualization of CAD data November 8, 2018 Chicago IL Anita Havele, Executive Director
More informationMechanical Engineering in Baden-Württemberg High-quality machines, first-class technologies and smart solutions for Industry 4.0 Baden-Württemberg is
Mechanical Engineering in Baden-Württemberg High-quality machines, first-class technologies and smart solutions for Industry 4.0 Baden-Württemberg is the centre of German mechanical engineering Facts and
More informationTHE CUSTOM TOOLING PROCESS AT LOWELL, INC.
WHITE PAPER THE CUSTOM TOOLING PROCESS AT LOWELL, INC. www.lowellinc.com LOWELL S CUSTOM TOOLING PROCESS AND PRECISION GD&T Lowell Inc. of Minneapolis, MN uses CNC machines to make hundreds of different
More informationPrecast Concrete Industry Extensions for Autodesk Revit Structure 2014
Precast Concrete Industry Extensions for Autodesk Revit Structure 2014 Reinhard Lackner Managing Director - IDAT Join us on Twitter: #AU2013 Class summary This class shows how extensions to Autodesk Revit
More informationTechniCom, Inc. 970 Clifton Avenue Clifton, NJ USA (973)
970 Clifton Avenue Clifton, NJ 07013 USA (973) 470 9110 http://www.technicom.com staff@technicom.com Version 19: Version 19 focuses on global innovation, adding complete functionality for employing JT
More informationVolkswagen Group: Leveraging VIRES VTD to Design a Cooperative Driver Assistance System
Volkswagen Group: Leveraging VIRES VTD to Design a Cooperative Driver Assistance System By Dr. Kai Franke, Development Online Driver Assistance Systems, Volkswagen AG 10 Engineering Reality Magazine A
More informationPolyWorks Inspector Standard. 3 Day Course
PolyWorks Inspector Standard INTRODUCTION TO POLYWORKS Workspace Manager Basic Options File and Project Structures PolyWorks License Manager INTRODUCTION TO POLYWORKS INSPECTOR User Interface Basic Options
More informationContents
2015 Mechanical@CATIA 30D, Jalan PJS 1/46, Petaling Utama, Petaling Jaya, 46000 Selangor Darul Ehsan Tel: +603-7783 3459 Fax: +603-7781 6818 Email : training@mawea.com.my Website : Course Subject Code
More informationNAVAIR Non Contact In-Process Inspection. Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015
NAVAIR Non Contact In-Process Inspection Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015 Overview Background on Navy 3D Model Status (3MS / MBD) Proposed System Examples Definition of Digital Product
More informationAbout EOS. Step 01. Step 02. Step 03
EOS EOS in Brief About EOS Founded in 1989 and headquartered in Germany, EOS is the technology and market leader for design-driven integrated e-manufacturing solutions for Additive Manufacturing (AM).
More informationPress release. In series: ColorForm technology from KraussMaffei
In series: ColorForm technology from KraussMaffei Together with customer Weidplas, KraussMaffei is establishing the world's first series application of the ColorForm process One-shot process for injection
More informationMoving from R&D to Manufacture
Moving from R&D to Manufacture Webinar to SBIR awardees May 9, 2013 Clara Asmail Senior Technical Advisor NIST MEP 1 Agenda Overview of NIST MEP program Technology Acceleration and MEP s role Sampling
More informationPRODUCT LIFE CYCLE IN DIGITAL FACTORY SVOČ FST 2011
PRODUCT LIFE CYCLE IN DIGITAL FACTORY SVOČ FST 2011 Ondřej Kurkin, West Bohemia University, Univerzitni 8, 306 14 Pilsen Czech Republic ABSTRACT This paper is focused to the usage of digital factory concept
More information