BristleBots. YOUR CHALLENGE: Use the materials provided to design your own bristlebot Rio Olympics mascot bot.
|
|
|
- Osborne Butler
- 5 years ago
- Views:
Transcription
1 BristleBots WHAT: Bristlebots are made of a vibration motor, battery, toothbrush, and foam tape. The robot is brought to life by completing a simple circuit between the battery and motor. YOUR CHALLENGE: Use the materials provided to design your own bristlebot Rio Olympics mascot bot. Can you make a switch? Can you redesign your bot to move faster, slower, straight, or in circles? Design a bot using pipe cleaners for legs?
2 BristleBot Hints... Notice one side of the battery is positive and one side is negative.
3 Paper Circuits WHAT: Paper circuits are self-designed simple or complex circuits made of cardstock, copper tape, a 3V battery, and LEDs. ELEMENTARY CHALLENGE (FOR TODAY): Design a paper circuit using one (1) LEDs to help bring a poem or illustration to life. CAN YOU BUILD: A circuit that can be used in more than one poem or illustration? A circuit that can be turned on and off using a different switch than the battery clip? FUTURE IDEAS FOR MIDDLE/HIGH SCHOOL EXTENSION: Design a paper circuit using more than one LED to help bring a poem or illustration to life. CAN YOU BUILD: A parallel circuit with more than one LED? A series circuit with more than one LED? A parallel circuit by swapping out your 3v coin cell for 2 AA 1.5v batteries? What changes do you notice? (Teacher Note: Ohms Law & a resistor are needed to solve this challenge.)
4 littlebits Mystery Boxes WHAT: littlebits are small electronic components that snap together with magnets to create a circuit. littlebits kits include components such as power, sensors (inputs), sound/lights/numbers (outputs) and a whole bunch more. ELEMENTARY CHALLENGE (TODAY): Open your mystery box to reveal the challenge. Use a combination of littlebits and recyclables to design a solution to your challenge. CAN YOU: Creatively integrate a switch (on/off) function? Change the speed of your motion or the volume/frequency of your sound? Design a unique and compelling housing that creatively represents your challenge? FUTURE IDEAS FOR MIDDLE/HIGH SCHOOL EXTENSION: CAN YOU DESIGN A BOT THAT: Solves a real world problem? Uses a laser (not natural light) to turn on/off remotely? Uses the Wireless Transmitter Bit to moderate speed and volume?
5 LED Clouds CHALLENGE: Make an LED cloud complete with flashing lights and sound effects. CAN YOU: Make your cloud light up? Record a sound effect for thunder? Use multiple LEDs to give your cloud a unique lightning effect? Lesley STEAM MIT LLK 2016
6 Party Machine Challenges: 1. Can you build a party sound machine that includes: a drum, a microphone, and some kind of spinning component? 2. What kind of designs or characters can you create for your party machine? 3. What extra bits and beats can you add to your design? littlebits Mystery Box These flyers are designed to be cut at perforation, rolled up, and placed in a box.
7 Pull A Prank Challenges: 1. Can you design a prank to annoy your teacher or friend sitting at least 2 feet away? 2. How can you camouflage your design so that your victim does not suspect anything. 3. What bits can you add to make your prank even more surprising, scary? littlebits Mystery Box These flyers are designed to be cut at perforation, rolled up, and placed in a box.
8 Spy Box Challenges: 1. Can you design a spy box to keep your valuables safe against snooping family members? 2. How can you camouflage the outside your box so that people leave it alone? 3. What bits can you add to make your box to add to the scare factor? littlebits Mystery Box These flyers are designed to be cut at perforation, rolled up, and placed in a box.
9 Box Monster Challenges: 1. Can you design an interactive monster out of recyclables? 2. What sensors can you add to trigger your monsters actions? 3. What bits can you add to your monster s scare factor? littlebits Mystery Box These flyers are designed to be cut at perforation, rolled up, and placed in a box.
10 Interactive Mobile Challenges: 1. Can you design a mobile that is triggered by a sensor? 2. Can you design an arm or structure so that it spins freely? 3. What other bits can you add to your design to make it more engaging? littlebits Mystery Box These flyers are designed to be cut at perforation, rolled up, and placed in a box.
Catapults. WHAT: Catapults were devices created in Ancient Greece that used a wooden arm (lever mechanism) to hurl large objects through the air.
TEKS - Math: Data Collection (1.8B) and Measurement (1.7A) & Data Collection (3.8A) and Measurement (2.9D) Catapults WHAT: Catapults were devices created in Ancient Greece that used a wooden arm (lever
Experimental Procedure
1 of 17 9/11/2018, 1:24 PM https://www.sciencebuddies.org/science-fair-projects/project-ideas/robotics_p012/robotics/build-a-light-tracking-bristlebot (http://www.sciencebuddies.org/science-fairprojects/project-ideas/robotics_p012/robotics/build-a-light-tracking-bristlebot)
Two Hour Robot. Lets build a Robot.
Lets build a Robot. Our robot will use an ultrasonic sensor and servos to navigate it s way around a maze. We will be making 2 voltage circuits : A 5 Volt for our ultrasonic sensor, sound and lights powered
ANATOMY OF A BIT TM how you can tell top from bottom. four on the floor!
ARCADE GAME BASICS 1 Learn BITSNAP ANATOMY OF A BIT TM how you can tell top from bottom. TOP BOTTOM BIT FEET 2 which COLOR-CODED BY FUNCTION Bits TM are grouped into four different categories, are color-coded.
INVENTION GUIDE. littlebits Basics. Invent a night light Invent an alarm Invent a spinning sign Invent interactive art. The littlebits Invention Cycle
INVENTION GUIDE INVENTION GUIDE 01 11 01 02 04 BIT INDEX POWER p4 power INPUT i8 proximity sensor i13 light sensor i16 pulse 13 15 17 19 21 23 littlebits Basics Invent a night light Invent an alarm Invent
EDU. The Well-Dressed Bug Bot. Design Challenge. Participant s Guide
Design Challenge The Well-Dressed Bug Bot The Challenge After studying the natural design of insects, create an exoskeleton for your bug bot using the 3Doodler pen and plastic strands. Challenge Background
DC Motors. come in all shapes and sizes. You probably have 3-4 on you right now. the two motors in the kit
DC otors come in all shapes and sizes the two motors in the kit You probably have 3-4 on you right now (cell vibrate, laptop fan, laptop dvd drive) When motors first came out, people thought we d just
Partnership Teacher Night February 2017 littlebits and Electronic Circuits
Partnership Teacher Night February 2017 littlebits and Electronic Circuits What are littlebits? littlebits are easy-to-use, color-coded, magnetic, electronic snap-and-lock circuits that can be linked together
ANATOMY OF A BIT TM how you can tell top from bottom. four on the floor!
CRAWLY CREATURE BASICS 1 Learn BITSNAP ANATOMY OF A BIT TM how you can tell top from bottom. TOP BOTTOM BIT FEET 2 which COLOR-CODED BY FUNCTION Bits TM are grouped into four different categories, are
Dual Fidgety Art Bot. We enjoyed building our Trashy Art Bot just as much as our Fidgety Art Bot.
Dual Fidgety Art Bot Our instructions will take you through the step by step procedure to build a Dual Fidgety Art Bot, an Art Bot built with two fidget spinners stacked together. Since our investigation
How to Pair AbiBird Sensor with App and Account
How to Pair AbiBird Sensor with App and Account By pairing your AbiBird sensor with your AbiBird app and account, you make it posible for signals to pass from the sensor, via the Cloud, to the AbiBird
ActivAting OrigAmi SEt guidebook
Activating Origami SET GUIDEBOOK Welcome to the TEKNIKIO Activating Origami SET CONTENTS 4 YOUR MATERIALS 8 ORIGAMI PATTERNS 14 EXAMPLE ACTIVITIEs This is one in a series of sets. In this set you will
Instructions: BristleBot. Dan Goldbacher Fred Bloss Jake Jacavage Gary Daddario
Instructions: BristleBot Dan Goldbacher Fred Bloss Jake Jacavage Gary Daddario Table of Contents Parts and Supplies Tools Estimated Time 1 1 1 Instructions: Steps 1-6 Steps 7-12 Optional Step Appendix
DC Motor. Controller. User Guide V0210
DC Motor Controller User Guide 59757 V0210 This kit provides a great exercise of intermediate soldering skills and creates a device that enables you to control various Pitsco motors, Tamiya gearboxes,
Snitch. Driveway-Gate Alarm. Anti-Tamper MAGNET CONTROLLER KNOW YOUR GATE S EVERY MOVE INSTRUCTION MANUAL
Snitch Driveway-Gate Alarm Anti-Tamper KNOW YOUR GATE S EVERY MOVE MAGNET CONTROLLER INSTRUCTION MANUAL Specifications Supply voltage Standby current Maximum current Siren output rating 13.8v DC 5mA 50mA
Art Robot Module STEMinistas (Sixth, Seventh, and Eighth Grade)
Art Robot Module STEMinistas (Sixth, Seventh, and Eighth Grade) Module Rationale: Students become electrical engineering artists through the challenge of constructing an artcreating robot from simple circuits.
I like to call this robot a rover, as I tried to pattern it after NASA s designs. Figure 1-1 shows the general outline of the finished rover.
1 The task of building a robot is unlike any other in computer science. It s a strange amalgamation of computer, electrical, and mechanical engineering. Being able to program is great (and necessary),
C - Underground Exploration
C - Underground Exploration You've discovered an underground system of tunnels under the planet surface, but they are too dangerous to explore! Let's get our robot to explore instead. 2017 courses.techcamp.org.uk/
meped v2 Assembly Manual
meped v Assembly Manual The meped is an open source quadruped robot designed by Scott Pierce of Spierce Technologies, LLC. This design is released under the Creative Commons, By Attribution, Share Alike
Sample Pages. Classroom Activities for the Busy Teacher: NXT. 2 nd Edition. Classroom Activities for the Busy Teacher: NXT -
Classroom Activities for the Busy Teacher: NXT 2 nd Edition Table of Contents Chapter 1: Introduction... 1 Chapter 2: What is a robot?... 5 Chapter 3: Flowcharting... 11 Chapter 4: DomaBot Basics... 15
Project 1 Instrumented Beakman s Motor
Project 1 Instrumented Beakman s Motor Work in teams of 4 for the projects. Read ahead and divide the work among the team members. One or two members should start on the report on the very first day, keeping
Easy Engineering Guide
Index: Unleash Your Creativity! Page 1: The Basics Page 2: Sorting Dowels Page 3: Measuring and Cutting Page 4: Dowels and Holes (Reaming Holes) Page 5: Reaming, Screws, Slide-Stop Material Page 6: Hydraulics/Pneumatics
A flashlight. An electric toothbrush. A TV remote control.
What s a circuit? A flashlight. An electric toothbrush. A TV remote control. All of these devices run on electricity. In order to power them, electricity needs to travel from one side of a power source
STEAM STUDENT SET INVENTION GUIDE. DOWNLOAD THE TEACHER'S GUIDE and other classroom resources at littlebits.cc/student-set
STEAM STUDENT SET INVENTION GUIDE DOWNLOAD THE TEACHER'S GUIDE and other classroom resources at littlebits.cc/student-set STEAM STUDENT SET PG INVENTION GUIDE 32 PG 39 PG 46 PG 53 04 06 27 07 09 14 17
A - Debris on the Track
A - Debris on the Track Rocks have fallen onto the line for the robot to follow, blocking its path. We need to make the program clever enough to not get stuck! 2017 https://www.hamiltonbuhl.com/teacher-resources
A - Debris on the Track
A - Debris on the Track Rocks have fallen onto the line for the robot to follow, blocking its path. We need to make the program clever enough to not get stuck! 2018 courses.techcamp.org.uk/ Page 1 of 7
A - Debris on the Track
A - Debris on the Track Rocks have fallen onto the line for the robot to follow, blocking its path. We need to make the program clever enough to not get stuck! Step 1 2017 courses.techcamp.org.uk/ Page
Electronic Instrumentation ENGR-4300 Fall 2006 Section Project 1 Instrumented Beakman s Motor
Project 1 Instrumented Beakman s Motor Work in teams of 4 for the projects. Read ahead and divide the work among the team members. One or two members should start on the report on the very first day, keeping
MRI SIMULATOR PST OPERATOR MANUAL
MRI SIMULATOR PST-100355 OPERATOR MANUAL MRI Simulator Operator Manual PST-100444 Rev 7 Copyright Copyright 2012 Psychology Software Tools, Inc. All rights reserved. The information in this document is
Section 1 WHAT IS HAPPENING IN THE WIRES?
Section 1 WHAT IS HAPPENING IN THE WIRES? INTRODUCTION Electricity is usually invisible. Except for lightning and sparks, you never see it in daily life. However, light bulbs and a magnetic compass can
EE-241. Introductory Electronics Laboratory Project Ideas Fall 2009
EE-241. Introductory Electronics Laboratory Project Ideas Fall 2009 EASY TO MODERATE 1. Musical notes display In this project students would build a display unit that will show high and low frequency sounds
The D70 only controls one external group of flashes. You can use many external flashes, but they will fire at the same power.
Multiple Flash Channels The D70 only controls one external group of flashes. You can use many external flashes, but they will fire at the same power. To control more than one set of external flashes you
The Useless Machine. DIY Soldering Edition. Instruction Guide v0004
The Useless Machine DIY Soldering Edition Instruction Guide v0004 TM For the best outcome, follow each step in order. We recommend reading this guide entirely before you get started. Tools required: Soldering
LED Field Strength Indicator Kit
LED Field Strength Indicator Kit Description The Field Strength Indicator kit from Qrpkits.com provides a visual way to monitor RF fields through the brightness of an LED. It will respond to RF fields
Example KodeKLIX Circuits
Example KodeKLIX Circuits Build these circuits to use with the pre-installed* code * The code is available can be re-downloaded to the SnapCPU at any time. The RGB LED will cycle through 6 colours Pressing
Unit 1 Electronics Name: Form:
Unit 1 Electronics Name: Form: Electronics Electronics is the study of components and techniques used to be able to build circuits controlled by electricity. An electronic system uses discrete components.
Beyond the Basic Camera Settings
Beyond the Basic Camera Settings ISO: the measure of a digital camera s sensitivity to light APERTURE: the size of the opening in the lens when a picture is taken SHUTTER SPEED: the amount of time that
Cardboard Circuit Playground Express Inchworm Robot
Cardboard Circuit Playground Express Inchworm Robot Created by Kathy Ceceri Last updated on 2018-10-25 05:41:17 PM UTC Guide Contents Guide Contents Overview Parts List -- Electronics Materials List --
Welcome to the DIY Thirsty Plant Kit - Manual
Welcome to the DIY Thirsty Plant Kit - Manual This is a step-by-step guide to making your own Thirsty Plant Detector. The equipment you should have at your station are wire strippers, wire cutters, wooden
Instructional Technology Center
Partner Teacher Night March 2017 - Lego WeDo 2.0 What are Lego WeDos? WeDos are lego sets that come with a power source and a motor that allows students to create lego constructions that move like robots.
FOURTH GRADE-SCIENCE (SCIENCE4_5)
Name: Date: FOURTH GRADE-SCIENCE (SCIENCE4_5) 1. Sound can travel fastest through A. air. B. metal. C. water. D. outer space. 2. An electromagnet has just enough strength to pick up five paper clips. Which
Lab 06: Ohm s Law and Servo Motor Control
CS281: Computer Systems Lab 06: Ohm s Law and Servo Motor Control The main purpose of this lab is to build a servo motor control circuit. As with prior labs, there will be some exploratory sections designed
30 in ONE Electronic Projects Lab Operating Instructions
30 in ONE Electronic Projects Lab Operating Instructions (Order Code EPL030) OPERATION CIRCUIT #2: The Electronic Storage Tank In the preceding section of the manual we told you that a capacitor stored
More about the ICs in Snap Circuits
More about the ICs in Snap Circuits Although Snap Circuits includes several parts that are called integrated circuits, they are actually modules containing a number of parts. The modules contain specialized
The Useless Machine. Parts Only - Build Guide v0001
TM The Useless Machine Parts Only - Build Guide v0001 For the best outcome, follow each step in order. We recommend reading this guide entirely before you get started. Tools required: One phillips screwdriver,
A Place Beyond the Heart. Marc S. Buckley.
A Place Beyond the Heart By Marc S. Buckley marc10buckley10@hotmail.com A storm rages outside seen through the large floor to ceiling window on the far side of the room. In the opening in the middle of
The difference between hearing and hearing
Domino Classic The difference between hearing and hearing Domino Classic Introduction Listening situations 1-on-1 conversation EASY Watching TV Small meeting Family gathering In a store Outdoors Conference
A Day in the Life CTE Enrichment Grades 3-5 mblock Robotics - Simple Programs
Activity 1 - Play Music A Day in the Life CTE Enrichment Grades 3-5 mblock Robotics - Simple Programs Computer Science Unit One of the simplest things that we can do, to make something cool with our robot,
Copyright 2014 Edmentum - All rights reserved.
Study Island Copyright 2014 Edmentum - All rights reserved. Generation Date: 12/10/2014 Generated By: Cheryl Shelton Title: Grade 5 Blizzard Bag 2014-2015 Science - Day 5 1. Julia did an experiment using
Maximum Power Point (Student Handout) (The Principles of Optimizing Photovoltaic Cell Power Output)
Name(s): Maximum Power Point (Student Handout) (The Principles of Optimizing Photovoltaic Cell Power Output) Part 1: Investigating How a Photovoltaic (PV) System Works Take a look at the animation of a
We re excited to launch the newest in our line of circuits: Very Useful Circuits
Very Useful Circuits Lectrical engineering for all ages Since launching Lectrify in 2015, we ve enabled thousands of children in classrooms and camps to build their first circuits using LEGO and common
SYRIS Xtive RFID TAG User Manual
SYRIS Xtive RFID TAG User Manual Version 2.5 2014/07/15 Index A SYTAG245-2S/2S-V Tag... 2 B SYTAG245-2K/2K-V Tag... 4 C SYTAG245-2C Card Tag... 6 D SYTAG245-TM-A Wristband Tag... 8 E SYTAG245-TM-B Wristband
Robotic Systems Challenge 2013
Robotic Systems Challenge 2013 An engineering challenge for students in grades 6 12 April 27, 2013 Charles Commons Conference Center JHU Homewood Campus Sponsored by: Johns Hopkins University Laboratory
MICROGRANNY v2.1 - Assembly Guide
last update: 9. 5. 2017 MICROGRANNY v2.1 - Assembly Guide bastl-instruments.com INTRODUCTION Welcome to the assembly guide for the MicroGranny kit. MicroGranny is a monophonic granular sampler by Bastl
Competition Arena Rules Revised March 21, 2017
Competition Arena Rules Revised March 21, 2017 General Rules GR1 Only one robot per team will be allowed in the tournament. Backup robots will NOT be allowed. Teams found in violation will not be allowed
marbles (16mm) marbles (25mm) meter stick 10 1 sorting circle 10 1 tape (only necessary if using string) 10 rolls 1 roll
Grade 5 Teachers Group of 3 Engage marbles (16mm) 90-130 9-13 marbles (25mm) 10-30 1-3 meter stick 10 1 sidewalk chalk (optional) 10 sticks 1 stick sorting circle 10 1 string (optional) 20 meter length
Microsoft Surface Dial Teardown
Microsoft Surface Dial Teardown Teardown of the Microsoft Surface Dial performed on Wednesday November 30, 2016. Written By: Scott Havard ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION Earlier
VCE VET ELECTROTECHNOLOGY
Victorian Certificate of Education 2010 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET ELECTROTECHNOLOGY Written examination Thursday 4 November 2010 Reading time:
Wiring Diagram for Wireless 3-Valve Setup Live Pan
Wiring Diagram for Wireless 3-Valve Setup Live Pan Modify Wires The Live pan has no battery, so some of the wires Need to be modified 1. Locate the red wire form hard wired Controller and from the Wireless
3 Reasons to choose ScanNCut DX SDX1200
SDX1200 Stand-alone no PC required Now cuts up to 3 mm thick materials like foam and felt 600 dpi built-in scanner Fully automatic blade 1,303 built-in designs with 17 fonts Wireless connectivity Precise,
For our first radio, we will need these parts: -A sturdy plastic bottle.
For our first radio, we will need these parts: -A sturdy plastic bottle. I have used the plastic bottle that hydrogen peroxide comes in, or the bottles that used to contain contact lens cleaner. They are
Activity 2 Wave the Flag. Student Guide. Activity Overview. Robotics Jargon. Materials Needed. Building the Robot
Activity Overview In this activity, you will learn about pivot points and integrate a servo motor into your robot to create a pivot point capable of waving a flag. After building the robot, you will conduct
Activity 2 Wave the Flag. Student Guide. Activity Overview. Robotics Jargon. Materials Needed. Building the Robot
Activity Overview In this activity, you will learn about pivot points and integrate a servo motor into your robot to create a pivot point capable of waving a flag. After building the robot, you will conduct
Installation tutorial for Console Customs Xbox 360 MaxFire LITE rapid fire Mod Chip.
Installation tutorial for Console Customs Xbox 360 MaxFire LITE rapid fire Mod Chip. This tutorial is designed to aid you in installation of a console customs MaxFire LITE modchip. This tutorial covers
ELECTRONICS STARTER KIT
ELECTRONICS STARTER KIT (MAP 474 - N02QQ) R These five small self-assembly circuits cover basic principles of electronics and can be adapted for numerous practical application. The five circuits include
e d u c a t i o n Detect Dark Line Objectives Connect Teacher s Notes
e d u c a t i o n Objectives Learn how to make the robot interact with the environment: Detect a line drawn on the floor by means of its luminosity. Hint You will need a flashlight or other light source
The IntoPlay build. This section will show how to fill the components into the case halves, and also the case base, which will look like this:
The IntoPlay build Ok, I presume you have read the sections about cutting the holes in the case front, speaker holes and spray painting, modding components, preparing the case, etc. So far, the guides
Inspira Quilt Frame and Mega Quilter FAQ s
Inspira Quilt Frame and Mega Quilter FAQ s Mega Quilter: What is the Mega Quilter? The Husqvarna Viking Mega Quilter is a semi-industrial sewing machine designed for the home sewer and quilter and the
Where C= circumference, π = 3.14, and D = diameter EV3 Distance. Developed by Joanna M. Skluzacek Wisconsin 4-H 2016 Page 1
Instructor Guide Title: Distance the robot will travel based on wheel size Introduction Calculating the distance the robot will travel for each of the duration variables (rotations, degrees, seconds) can
Fryer's Trebuchet Paper Kits
Fryer's Trebuchet Paper Kits Things you will need 7 sheets of card approx. 0.3 mm or 0.01 inches thick 1 sheet of paper to print out to download. 2 x 6-7 mm dowel or pencils 1 paper clip String 6 cms (2.5
Course Overview. Course Requirements. Key Concepts. Age Restrictions Subject Objective Duration. Prerequisite Skills Hardware equipment
TOKYMAKER Science Course Light Course Overview For children and adults, light is a fascinating and familiar topic, but it can also get quite complicated. This course will explain the concept of light to
fun and adaptable pie shooting catapult!
fun and adaptable pie shooting catapult! (made with 3D printing) a project by Maya & Noah the MyPie Catapult project: The MyPie Catapult is designed by Maya and Noah. Maya is the brains behind the design.
Cost: Pipe Cleaners = $3 for 100 Beads = $6 for 1000
Tools and Manipulatives Math 1. Paper Plate Counting- Cut a paper plate into fourths and write a number on each part. Give students a bag of beans and have them put the correct number of beans on each
Rudimentary Swarm Robotics
Rudimentary Swarm Robotics Josiah Hamid Khani, Thomas Keller, Matthew Sims, & Isaac Swift Episcopal School of Dallas, josiahhk@gmail Project Description Rudimentary Swarm Robotics The concept of swarm
a Motorized Robot Inventor s Guide What will yours look like?
8+ a Motorized Robot Spark!Lab is a real place located in the Smithsonian s National Museum of American History. It s a hands-on invention activity center where visitors learn that invention is a process
Multi-Vehicles Formation Control Exploring a Scalar Field
Multi-Vehicles Formation Control Exploring a Scalar Field Polytechnic University Department of Mechanical, Aerospace, and Manufacturing Engineering Polytechnic University,6 Metrotech,, Brooklyn, NY 11201
REMOVE REAR OF TX-2S TO INSERT THE 9 VOLT BATTERY.
P.O Box 578 Casino, NSW, 2470 Australia Phone: International ++614 2902 9083 Australia (04) 2902 9083 Website: http://rcs-rc.com E mail: Info@rcs-rc.com TX-2s Digital Proportional R/C TABLE OF CONTENTS
How to add a push power button to your XBOX S-Type controller
26.10.2006 Page 1 of 5 http://synapse.wordpress.com How to add a push power button to your XBOX S-Type controller - By Synapse Required Items - XBOX S-Type controller (Wireless ones won t work) Soldering
Monster Table Sign Displays & Table Leg Instructions
Monster Table Sign Displays & Table Leg Instructions Supplies*: Cardboard Hot glue Magenta, blue, green, orange, and yellow furry fabric Cardstock paper Pool noodles (two for each table) Utility knife
Wireless 900 MHz Receiver
Overview and Identification The 900 MHz unit receives a repeated or re-transmitted RF signal from one or more wireless temperature or humidity transmitters. The signal from the transmitter (418 MHz) is
Features & Benefits. Memory Craft
Features & Benefits Memory Craft 15000 www.janome.com ipad Send Designs to your Machine Wirelessly No more USB s or cords required! Now you can send embroidery designs from your computer or your ipad directly
Basic Electricity 30 Hour - Part 1 Student Workbook Issue: US140/30/2a-IQ-0402A. Written by: LJ Technical Dept
Basic Electricity 30 Hour - Part Issue: US40/30/a-IQ-040A Copyright 004,. No part of this Publication may be adapted or reproduced in any material form, without the prior written permission of. Written
Introduction to Electronics and Breadboarding Circuits
Introduction to Electronics and Breadboarding Circuits What we're going to learn today: What is an electronic circuit? What kind of power is needed for these projects? What are the fundamental principles
Star Trek TOS communicator MOTOR upgrade kit Install instructions Hyperdyne Labs 2002
Star Trek TOS communicator MOTOR upgrade kit Install instructions Hyperdyne Labs 2002 Package Your package should include: Moiré motor Button cell battery holder with 357 1.5V battery wires for switch
Viper USER MANUAL. S ta r t e r R / C Ro b o t K i t. F i n g e r T e c h R o b o t i c s. c o m
Viper S ta r t e r R / C Ro b o t K i t USER MANUAL F i n g e r T e c h R o b o t i c s. c o m Viper Star ter Combat Robot Kit TABLE OF CONTENTS Kit Contents 3 Tools Required 4 Safety 5 Before You Begin
Passwords. ScienceVocabulary
Passwords ScienceVocabulary D Table To the of Student Contents Ecosystem. Sedimentary. Magnetic field. Sometimes it seems that scientists speak a language all their own. Passwords: Science Vocabulary will
Deck Mount Installation with Bench
Deck Mount Installation with Bench 1. Mark track with square. 2. Cut tracks with saw. 3. Drill ¼ hole (if needed.) 4. Countersink track. 5. Countersink all track 6. File all track ends. ends. 7. Lay out
Chemistry test Collection edited by: Content authors: Online:
1 Chemistry test Collection edited by: Ryan Stickney Content authors: Ryan Stickney and OpenStax College Online: This selection and arrangement of content
Capacitive Face Cushion for Smartphone-Based Virtual Reality Headsets
Technical Disclosure Commons Defensive Publications Series November 22, 2017 Face Cushion for Smartphone-Based Virtual Reality Headsets Samantha Raja Alejandra Molina Samuel Matson Follow this and additional
Magnetism and Electricity
Magnetism and Electricity Investigation 1-Part 1: Investigating Magnets and Materials Force: a push or a pull Magnet: an object that sticks to iron Magnetism: a specific kind of force Attract: when magnets
ECE 511: FINAL PROJECT REPORT GROUP 7 MSP430 TANK
ECE 511: FINAL PROJECT REPORT GROUP 7 MSP430 TANK Team Members: Andrew Blanford Matthew Drummond Krishnaveni Das Dheeraj Reddy 1 Abstract: The goal of the project was to build an interactive and mobile
6 4 googleplus 0 reddit 1 blogger 4
MICROPHONE TYPES 6 4 googleplus 0 reddit 1 blogger 4 If you want to record audio you'll obviously need a mic. But which type and why? What suits the video producer next door might not be best for your
case styles accessories
87 case styles Audio-Technica offers a wide array of professional windscreens, clamps, shock mounts, adapters and other audio designed to fit A-T microphones. Many are provided as included ; both included
TX-1AA TRANSMITTER. Note:
TX-1AA TRANSMITTER Physical Dimensions: 2.95 x 1.07 Power Requirements: 1 AA Cell Alkaline Typical Duration: 30 Hours Maximum Duration: 70 Hours Free Air Range Test: 20 Feet This transmitter can be programmed
SMART ELEGANT SOPHISTICATED
THE SERIES SMART ELEGANT SOPHISTICATED www.janome.co.uk DESIGNED FOR EVERY TYPE OF SEWING Welcome to... sewing the way you want it to be! These contemporary styled, well illuminated, free arm sewing machines
High/Low Bay Passive Infrared Occupancy Sensor
Models Sensors: HBP-111-L7, with IR remote capability HBP-112-L7, no IR capability High/Low Bay Passive Infrared Occupancy Sensor Mounting Modules: HBP-EM1 extender module HBP-SM1 surface mount module
Design and function. How can technology make our lives easier? 1 d Technology helps us travel far. 2 It helps people keep in touch.
Unit 1 Design and function How can technology make our lives easier? 1 How does technology help us? Match and write. Also think of your own ideas. 1 d Technology helps us travel far. 2 It helps people
How to Build the Robotics++ V2 Robot. Last Edited Nov
How to Build the Robotics++ V2 Robot Last Edited Nov. 15-2014 www.roboticscity.com 1 Completed Robotics++ V2 Robot. More views of completed robot can be found at the end of this instructions manual The
D W. (Total 1 mark)
1. One electronvolt is equal to A. 1.6 10 19 C. B. 1.6 10 19 J. C. 1.6 10 19 V. D. 1.6 10 19 W. 2. A battery of internal resistance 2 Ω is connected to an external resistance of 10 Ω. The current is 0.5
An important note about your Charged Up Exploration Kit.
ChargedUp Hands On Exploration Kit First An important note about your. DO NOT ASSUME that you will see something at the tournament because it was in this kit. This supplemental study material IS NOT part