SETTING THE TIME. Instruction Booklet

Size: px
Start display at page:

Download "SETTING THE TIME. Instruction Booklet"

Transcription

1 SETTING THE TIME K3 Instruction Booklet

2 Welcome! Thank you for choosing your high quality Geckota K3 and welcome to the Geckota family! Your watch was checked, packed and sent with the care and attention to detail that goes into everything we do. Like you, we love receiving watches, so we know you ll want to start enjoying yours immediately Please read this owner s handbook before setting and wearing your K3 for the first time. This is important because it will help ensure that you get years of enjoyable timekeeping from your Geckota watch. Please keep this owner s handbook for reference. If your watch ever goes to a new owner, please give the handbook to them. Jonathan Quinn Founder & Managing Director

3 Hour Hand Minute Hand Date Display* *available depending on model Screw-down Crown 120 Click Bezel Second Hand

4 SCREW-DOWN CROWN When you screw the crown down, the watch case locks with the crown s internal threads and gaskets to form a secure seal. The seal is vital for your watch to resist entry of water and dust. To unscrew the crown: Turn it gently anticlockwise. Because it is spring loaded and under tension, the crown will jump out slightly into its normal position when fully disengaged.

5 SCREW-DOWN CROWN 1/2 To screw the crown down: Push the crown gently towards the case. While holding it down turn it gently ANTI-CLOCKWISE about half a turn. Then, still holding it down, turn the crown CLOCKWISE to engage the thread and continue turning it until it is secure. CAUTION Cross-threading or over-tightening the screwdown crown may damage your watch.

6 SETTING THE TIME 1. First, unscrew the crown. 2. Pull the crown out to the second-click position. 3. Turn the crown to set the hour and minute hand.

7 SETTING THE TIME 4. Push the crown back to the normal position. 5. Screw-down the crown. CAUTION After adjusting your watch, always make sure the crown is fully screwed down before getting the watch wet.

8 SETTING THE DATE* 1. First, unscrew the crown. 2. Pull the crown out to the first-click position. 3. Turn the crown COUNTER CLOCKWISE to set the date *available depending on model

9 SETTING THE DATE* 4. Push the crown back to the normal position. 5. Screw-down the crown. *available depending on model CAUTION After adjusting your watch, always make sure the crown is fully screwed down before getting the watch wet.

10 WINDING THE WATCH 1. First, unscrew the crown until it jumps out slightly into its normal position. 2. Wind the watch by turning the crown CLOCKWISE times.

11 WINDING THE WATCH 3. Screw-down the crown. CAUTION After adjusting your watch, always make sure the crown is fully screwed down before getting the watch wet.

12 TECHNICAL SPECIFICATION Case Diameter Case Thickness Lug Width Glass Luminescence Weight Case 45 mm 16 mm 22 mm Scratch-resistant sapphire crystal with anti-reflective coating SuperLuminova 250g Marine grade solid 316L stainless steel

13 TECHNICAL SPECIFICATION Water Resistance Accuracy Anti-magnetism 500m / 50 ATM (50 bar) 20 ~ ±40 seconds per day (on wrist) 4800 A/m (direct current magnetic field) Operating Temperature Range -5 C to +50 C Power Reserve More than 41 hours when fully wound

14 YOUR GUARANTEE We want you to have full confidence in your new Geckota K3. That s why we guarantee your watch for 12 months from the original purchase date. This guarantee is void if the watch case has been opened, or the product is damaged by accident, negligence or other factors not due to defects in material or workmanship.

15 STAY IN TOUCH If you have any more questions, please contact our customer service team. Remember to visit to tell us about your experience of buying, owning and wearing your Geckota watch. Phone +44 (0) Post Geckota Limited PO BOX 185 Tewkesbury Gloucestershire GL20 9BL United Kingdom

16 Geckota Limited is registered in England and Wales as company number Geckota is a registered trademark. All other trademarks, registered trademarks and product names are the property of their respective owners. All details correct at the time of printing. All rights reserved. All images are copyright or used under licence. Copyright 2017 Geckota Limited

SWOLE CEO ROCKEFELLER MANUAL

SWOLE CEO ROCKEFELLER MANUAL SWOLE CEO ROCKEFELLER MANUAL You have always known you are different. Born for more. In life, there are very few moments when you get a chance to feel this. The feeling of power. The feeling of control.

More information

OPERATING INSTRUCTIONS CERTIFICATE GUARANTEE

OPERATING INSTRUCTIONS CERTIFICATE GUARANTEE OPERATING INSTRUCTIONS CERTIFICATE GUARANTEE OPERATING INSTRUCTIONS The MOLA 923M has a Swiss ETA 2895-2 self-winding movement with a power reserve of 42 hours and 28,800 oscillations per hour. To wind

More information

ABYSS 1000 PROFESSIONAL AUTOMATIC

ABYSS 1000 PROFESSIONAL AUTOMATIC OPERATION MANUAL ABYSS 1000 PROFESSIONAL AUTOMATIC Copyright 2007 CHASE-DURER LTD all rights reserved. Table of Contents Display and Screw Down Crown Winding / Setting Local Time Setting Date Adjusting

More information

THE BENCHMARK OF QUALITY, PRECISION, STYLE AND VALUE OWNERS MANUAL AND WARRANTY INFORMATION

THE BENCHMARK OF QUALITY, PRECISION, STYLE AND VALUE OWNERS MANUAL AND WARRANTY INFORMATION THE BENCHMARK OF QUALITY, PRECISION, STYLE AND VALUE OWNERS MANUAL AND WARRANTY INFORMATION Table of Contents 2. Congratulations 3. Helpful Terms 4.-5. Water Resistance 6.-7.-8.-9 Basic Instructions 10.-11.

More information

Beyond Telling Time USER MANUAL

Beyond Telling Time USER MANUAL Beyond Telling Time USER MANUAL Brand Story General Information Operating Instructions - Quartz 2 Hands and 3 Hands Instructions - Quartz Multifunction Instructions - Quartz Chronograph Instructions -

More information

Elcometer Muller Laboratory Grinder

Elcometer Muller Laboratory Grinder English Elcometer 2000 Muller Laboratory Grinder Operating Instructions English is a registered trademark of Elcometer Limited. All other trademarks acknowledged. Copyright Elcometer Limited. 2009. All

More information

THE BENCHMARK OF QUALITY, PRECISION, STYLE AND VALUE OWNERS MANUAL AND WARRANTY INFORMATION

THE BENCHMARK OF QUALITY, PRECISION, STYLE AND VALUE OWNERS MANUAL AND WARRANTY INFORMATION THE BENCHMARK OF QUALITY, PRECISION, STYLE AND VALUE OWNERS MANUAL AND WARRANTY INFORMATION Table of Contents 2. Congratulations 3. Helpful Terms 4.-5. Water Resistance 6.-7.-8.-9 Basic Instructions 10.-11.

More information

Instruction Manual. MULTIFUNCTION three-eye date

Instruction Manual. MULTIFUNCTION three-eye date Instruction Manual MULTIFUNCTION three-eye date Gc offers a unique fusion of timeless fashion and quality Swiss watchmaking... Smart Luxury. This is the essence of the Gc brand an intelligent way to live

More information

Owners Manual AGBAY Double Blade Levelers

Owners Manual AGBAY Double Blade Levelers Owners Manual AGBAY Double Blade Levelers (20 Agbay & 12 Agbay Jr. ) Made in USA Lower Blade Adjustment Knob Stainless Adjustment Rod Stainless Steel Blades Upper blade frame Lower blade frame Scale for

More information

A Modern Tale Of Classic Luxury USER MANUAL

A Modern Tale Of Classic Luxury USER MANUAL A Modern Tale Of Classic Luxury USER MANUAL Brand Story General Information Movement Instructions - Quartz 2 Hands and 3 Hands Instructions - Quartz Multifunction Instructions - Quartz Chronograph Instructions

More information

User Guide.

User Guide. User Guide www.dymo.com D I K M L H G C F A B E J N A Tape cassette door H Character selection window B Tape rollers I Cutting handle C Tape advance knob J Embossing adjustment screw D Start line K Cable

More information

MODEL T " SPIRAL CUTTERHEAD INSTRUCTIONS

MODEL T  SPIRAL CUTTERHEAD INSTRUCTIONS MODEL T10125 6" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10125 spiral cutterhead is designed to replace the straight knife cutterhead on the Model G0452 6" jointer. The total procedure of changing the

More information

Owners Manual AGBAY Single Blade Levelers (20 Agbay & 12 Agbay Jr.)

Owners Manual AGBAY Single Blade Levelers (20 Agbay & 12 Agbay Jr.) Owners Manual AGBAY Single Blade Levelers (20 Agbay & 12 Agbay Jr.) Made In USA Adjustment Knobs Adjustment Rod Frame Stainless Steel Blade Stainless Steel Scales Feet Blade Guard Jr. Model Shown Agbay

More information

SCREWED-DOWN POSITION

SCREWED-DOWN POSITION CHRONOGRAPH WATCHES SETTINGS A B C D SCREWED-DOWN POSITION [position A] Your TUDOR watch is equipped with a screw-down crown. Once this is fully screwed down against the case, your watch is guaranteed

More information

R-EVO MANUAL. English

R-EVO MANUAL. English R-EVO MANUAL English 1 ENGLISH VERSION Adjusting the holster for your revolver With versatility, refined design, high quality, elegance and resistance - R-EVO, the new GR Holster for revolvers, supplies

More information

AUC Cell Alignment Tool. User Manual

AUC Cell Alignment Tool. User Manual AUC Cell Alignment Tool User Manual WARRANTY Spin Analytical Inc., warrants this product to be defect free in both material and workmanship for 90 days from the date of shipment. Labor services are guaranteed

More information

RUMFORD 1000 / 1000CD / 1000H

RUMFORD 1000 / 1000CD / 1000H RUMFORD 1000 / 1000CD / 1000H TABLE OF CONTENTS Dear Customer, The Renaissance Rumford 1000, 1000CD, 1000H are all members of the Renaissance Fireplaces TM family of ultra high end, low emission fireplaces.

More information

Frequently Asked Questions

Frequently Asked Questions Teknatool International Ltd 65 The Concourse Henderson Auckland New Zealand Ph 0064 9 837 6900 Fax 0064 9 837 6901 Email sales@teknatool.com Website www.teknatool.com Frequently Asked Questions Date Raised:

More information

The Oyster Perpetual LADY-DATEJUST 28

The Oyster Perpetual LADY-DATEJUST 28 The Oyster Perpetual LADY-DATEJUST 28 Oyster, 28 mm, Oystersteel LADY-DATEJUST 28 The elegant design and Cyclops eye magnifying the date have made the Oyster Perpetual Datejust, originally introduced in

More information

Graysen Manager s Chair Model # WC-666

Graysen Manager s Chair Model # WC-666 LOT NUMBER: DATE PURCHASED: / / Graysen Manager s Chair ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED. If you have any questions regarding assembly or

More information

OPERATING INSTRUCTIONS www.bowforcearchery.com MAINTENANCE AND FINE TUNING Routinely grease the following with a premium bearing grease: The Extended Nut Fixture using the supplied grease fitting. The

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63827-1400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

OWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM

OWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM The only table saw fence with Automatic Positioning Control TM OWNER S MANUAL Please read this owner s manual before use and keep it at hand for reference. Note: The INCRA TS III system consists of three

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 200218-2400 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Order Number

Order Number Order Number 200218-5900 FEATURES Application Tooling Specification TYPE 4D A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 200218-1700 A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

REGATTA PATH LIGHT (RGP)

REGATTA PATH LIGHT (RGP) NEEDED FOR INSTALLATION: 5/64 & 5/32 Allen Wrench Waterproof Wire Connectors Warning Low Voltage Hot Surface Wear Gloves By Others Gloves IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE THESE INSTALLATION

More information

OWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM

OWNER S MANUAL CONTENTS. The only table saw fence with Automatic Positioning Control TM The only table saw fence with Automatic Positioning Control TM OWNER S MANUAL Please read this owner s manual before use and keep it at hand for reference. Note: The INCRA TS II system consists of three

More information

Application Tooling Specification

Application Tooling Specification Order No. 63828-1200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly

More information

SPIRIT OF BIG BANG INSTRUCTION MANUAL

SPIRIT OF BIG BANG INSTRUCTION MANUAL SPIRIT OF BIG BANG INSTRUCTION MANUAL SPIRIT OF BIG BANG G A E C B D F H ENGLISH A. Hour hand B. Minute hand C. Chronograph hand D. Screw-in crown E. Second hand F. Chronograph counters G. Pushbutton:

More information

Order Number

Order Number Order Number 200218-5500 FEATURES Application Tooling Specification TYPE 4D A full-cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly

More information

PLANISHING HAMMER STAND OWNER S MANUAL

PLANISHING HAMMER STAND OWNER S MANUAL PLANISHING HAMMER STAND OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious

More information

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extension Sections. Reliable Connections

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extension Sections. Reliable Connections insertion Instructions manual MUELLER Improved, Centurion Series, Modern Improved, and 107 table of contents PAGE Centurion Series Fire Hydrant Adding an Extension 2-3 Improved Fire Hydrant Inserting Extension

More information

Inventory (Figure 2)

Inventory (Figure 2) MODEL T10130/T10126 6" & 8" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10126/T10130 indexable insert spiral cutterheads are designed to replace straightknife cutterheads from the Grizzly jointer Models

More information

Application Tooling Specification

Application Tooling Specification Order No. 63819-0901 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly

More information

INSTRUCTIONS FOR USE MODE D EMPLOI CHRONOGRAPH CALIBRE 2385 SELFWINDING

INSTRUCTIONS FOR USE MODE D EMPLOI CHRONOGRAPH CALIBRE 2385 SELFWINDING INSTRUCTIONS FOR USE MODE D EMPLOI CHRONOGRAPH CALIBRE 2385 SELFWINDING 4 1 2 e 6 5 f 3 7 A B C D Table OF CONTENTS Introduction p. 24 - The Manufacture Audemars Piguet About the watch p. 28 - The 2385

More information

EMO. Service Instruction. created by Frank Weithöner. Table of contents: Special Tools Assembling Mixing Chamber

EMO. Service Instruction. created by Frank Weithöner. Table of contents: Special Tools Assembling Mixing Chamber EMO Service Instruction created by Frank Weithöner Table of contents: - Special Tools Disassembling Mixing Chamber Assembling Mixing Chamber Adjustment Rotor / Level Indicator Unit Temperature Compensating

More information

Installation Operation Care

Installation Operation Care Installation Operation Care Designer Roller and Designer Screen Shades Standard and Cassette Cordless Lifting System CONTENTS Getting Started: Product Views... 1 Tools and Fasteners Needed... 3 Installation

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63825-8100 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

PVCu FOLD & SLIDE DOOR OUTWARD OPENING

PVCu FOLD & SLIDE DOOR OUTWARD OPENING PVCu FOLD & SLIDE DOOR OUTWARD OPENING STEP-BY-STEP FULLY ILLUSTRATED ASSEMBLY INSTRUCTIONS This product is covered by a 10 year manufacturer s guarantee. Should any part of it become defective due to

More information

AUC Cell Assembly Torque Stand. User Manual

AUC Cell Assembly Torque Stand. User Manual AUC Cell Assembly Torque Stand User Manual WARRANTY Spin Analytical Inc., warrants this product to be defect free in both material and workmanship for 90 days from the date of shipment. Labor services

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63811-8700 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Inventory (Figure 2)

Inventory (Figure 2) MODEL T10127 12" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10127 indexable insert spiral cutterhead is designed to replace the straightknife cutterhead from the Grizzly jointer Model G0609. The total procedure

More information

Copyright Next Wave Automation All Rights Reserved. Version SEPTEMBER Updates of this manual are Available at

Copyright Next Wave Automation All Rights Reserved. Version SEPTEMBER Updates of this manual are Available at Copyright Next Wave Automation All Rights Reserved. Version1.0 22 SEPTEMBER 2016 Updates of this manual are Available at www.nextwaveautomation.com FOR THE MOST RECENT MANUALS, DRIVERS, AND OTHER SOFTWARE,

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 4D Order No. 63819-0300 A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extention Sections. Reliable Connections

MUELLER. Improved, Centurion Series, Modern Improved, and 107. Fire Hydrants. Inserting Extention Sections. Reliable Connections insertion Instructions manual MUELLER Improved, Centurion Series, Modern Improved, and 107 table of contents PAGE Centurion Series Fire Hydrant Adding an Extention 2-3 Improved Fire Hydrant Inserting Extention

More information

OWNER S MANUAL. Safety. Please read this owner s manual before use and keep it at hand for reference. Warranty

OWNER S MANUAL. Safety. Please read this owner s manual before use and keep it at hand for reference. Warranty Please read this owner s manual before use and keep it at hand for reference. OWNER S MANUAL Safety Important safety instructions for using the INCRA Miter5000 Before using the INCRA Miter5000, read and

More information

Application Tooling Specification

Application Tooling Specification Order No. 200218-2200 Application Tooling Specification Type 4D FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision, user-friendly

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet Hand Crimp Tool Application Tooling Specification Sheet TYPE 4D Order No. 63819-1300 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

CFC Series Cable Replacement Kit. for CFP Series Carbon Fiber Boom Poles. Owner s Manual

CFC Series Cable Replacement Kit. for CFP Series Carbon Fiber Boom Poles. Owner s Manual CFC Series Cable Replacement Kit for CFP Series Carbon Fiber Boom Poles Owner s Manual TA (mini XLR) connector Right-angle XLR connector Nylon line Coiled XLR cable. mm hex key Tip strain relief Introduction

More information

OPERATING INSTRUCTIONS WARRANTY & SERVICE GUIDE

OPERATING INSTRUCTIONS WARRANTY & SERVICE GUIDE OPERATING INSTRUCTIONS WARRANTY & SERVICE GUIDE 1 TABLE OF CONTENTS ESQ MOVADO WATCHES Page 3 CARE & MAINTENANCE Page 4 OPERATING INSTRUCTIONS STANDARD 2-HAND MODELS, Quartz and Automatic Page 6 Includes

More information

White Industries Front Hub Instructions

White Industries Front Hub Instructions White Industries Front Hub Instructions Tools required: 2mm hex/allen wrench, set of sockets, mallet, bearing puller, bearing press. Disassembly 1. Loosen the set screws, there are three or one depending

More information

SB-WM-ART1-M-BL. Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL

SB-WM-ART1-M-BL. Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL SB-WM-ART1-M-BL Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 90 lbs (41 kg). Use with heavier than the maximum

More information

Southeast Toyota Tacoma 4-Door Roof Rack DEALER INSTALLED

Southeast Toyota Tacoma 4-Door Roof Rack DEALER INSTALLED Parts list 1- Right side rail assembly 1- Left side rail assembly 2- Cross bars 4- Protective gaskets 4- Screws M5 x 13mm long 8- Riv-nuts ¼ -20 8- Screws ¼ -20 x 3/4 Tools needed for installation Safety

More information

864 Double-Door Face. Compatibility: 864 TRV GS 864 HO. Packing List: Installation Details. Used on All Fireplaces

864 Double-Door Face. Compatibility: 864 TRV GS 864 HO. Packing List: Installation Details. Used on All Fireplaces Compatibility: 864 TRV GS 864 HO Packing List: 864 ST Used on All Fireplaces Doors Faceplate Baffle Hinge Pins Magnets (shipped on doors) Faceplate #8 x 3/8 Sheet Metal Screws Upper and Lower Grills Installation

More information

OxFAC-08 Angled Fiber Cleaver. User Manual. Issue 1.5

OxFAC-08 Angled Fiber Cleaver. User Manual. Issue 1.5 OxFAC-08 Angled Fiber Cleaver User Manual Issue 1.5 Contents Issue & Scope... 2 Introduction... 2 Contents of Cleaving Kit & Unpacking... 3 Cleaving Problems... 8 Blade damage:... 9 Cleaver Maintenance...

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63828-0200 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Mounting Instructions for Cisco Aironet 1550 Series Outdoor Access Point Pole-Mount Kits

Mounting Instructions for Cisco Aironet 1550 Series Outdoor Access Point Pole-Mount Kits Mounting Instructions for Cisco Aironet 1550 Series Outdoor Access Point Pole-Mount Kits Date: April 2011 Part number: This document describes how to use the Cisco Aironet 1550 Series Outdoor Access Point

More information

FAR EAST TOOLS CATALOG 5700Z BERGEON MODEL

FAR EAST TOOLS CATALOG 5700Z BERGEON MODEL No: JK01 GLASS & CASE PRESS (LIGHTER) No: JK03 WOOD HOLDER PRESS MACHINE No:JK02 SCREW CASE BACK CLOSING PRESS LIKE 5700Z BERGEON MODEL No: JK04 POCKET SIZE BACK CASE OPENER Page:1 No: JK05 CASE FIXING

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0900 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63827-7500 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Installation Operation Care

Installation Operation Care Installation Operation Care Applause Honeycomb Shades LiteRise Operating System with TrimKit Contents GETTING STARTED Product View... 1 Tools and Fasteners Needed... 2 INSTALLATION Installation Overview...

More information

ELECTRIC TOOL CORPORATION

ELECTRIC TOOL CORPORATION Cat. No. -0 / Hex Demolition Hammer Cat. No. 0-0 Spline Rotary Hammer MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON ROAD BROOKFIELD, WISCONSIN 00-0 -9-00 d 000 -9-00 d SpecialTools Require Forcing discs

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet Hand Crimp Tool Application Tooling Specification Sheet TYPE 4D Order No. 63819-0800 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

CHEMINSTRUMENTS LABORATORY DRAWDOWN COATER LC-100 OPERATING INSTRUCTION

CHEMINSTRUMENTS LABORATORY DRAWDOWN COATER LC-100 OPERATING INSTRUCTION CHEMINSTRUMENTS LABORATORY DRAWDOWN COATER LC-100 OPERATING INSTRUCTION PRODUCT DESCRIPTION...2 UNPACKING...3 ASSEMBLY...4 Key Components...4 Set Up...5 OPERATION...5 MAINTANCE...7 WARRANTY...8 1 PRODUCT

More information

Durst Laborator 138 S

Durst Laborator 138 S Durst Laborator 138 S -I- G139 Durst Laborator 138 S Durst Laborator G 139 Servicing instructions L 1 3 8 S G 139 - Replacing the counterweight spring The special tool required for this purpose is supplied

More information

Ribcage Installation. Part 2 - Assembly. Back-Bone V1.06

Ribcage Installation. Part 2 - Assembly. Back-Bone V1.06 Ribcage Installation Part 2 - Assembly Back-Bone V1.06 Contents Section 1 Before You Get Started... 2 Included With Your Kit:... 2 Figure: A... 3 CAUTION!... 4 Note:... 4 Tools Required... 5 Section 2:

More information

10ft. Square Side Mount Item # 64443

10ft. Square Side Mount Item # 64443 10ft. Square Side Mount Item # 64443 A S S E M B L Y A N D O P E R A T I O N Thank you for your purchase of Frontgate s 10 Square Side Mount umbrella. Please remove all contents from the package, inspect

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0900 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Installation Operation Care. Duette Honeycomb Shades EasyRise Lifting System

Installation Operation Care. Duette Honeycomb Shades EasyRise Lifting System Installation Operation Care Duette Honeycomb Shades EasyRise Lifting System CONTENTS Getting Started: Product View... 1 Tools and Fasteners Needed... 2 Installation: Installation Overview... 3 Mount the

More information

OVERBECK MACHINE TOOLS TWISTER OWNERS MANUAL

OVERBECK MACHINE TOOLS TWISTER OWNERS MANUAL OVERBECK MACHINE TOOLS TWISTER OWNERS MANUAL MODEL: SERIAL NUMBER: BORN ON OVERBECK MACHINE TOOLS 953 TOWER PLACE, UNIT E SANTA CRUZ, CA 95062 (831) 425.5912 FAX (831)423.9363 1INFO@OVERBECKMACHINE.COM

More information

KneeWalkersForRent.com How to Set Up and Adjust Your Knee Walker

KneeWalkersForRent.com How to Set Up and Adjust Your Knee Walker KneeWalkersForRent.com 408.564.7899 How to Set Up and Adjust Your Knee Walker The Knee Walker comes out of the box in two sections the body and handlebar. Insert the Handlebar section into the body. Line

More information

Hand Crimp Tool Specification Sheet Order No

Hand Crimp Tool Specification Sheet Order No Hand Crimp Tool Specification Sheet Order No. 63811-7400 FEATURES ΠA full cycle ratcheting hand tool ensures complete crimps ΠErgonomic soft grip handles for comfortable crimping ΠA precision user-friendly

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet Tool Kit Order No. 63811-5370 FEATURES Application Tooling Specification Sheet TYPE 4C Hand Crimp Tool Order No. 63811-5300 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically designed

More information

HAND CRIMP TOOL SPECIFICATION SHEET Order No (Replaces (HTR1031E) And (HTR1031E1))

HAND CRIMP TOOL SPECIFICATION SHEET Order No (Replaces (HTR1031E) And (HTR1031E1)) HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-3200 (Replaces 11-01-0084 (HTR1031E) And 11-01-0211 (HTR1031E1)) TYPE 2C SCOPE Terminal Wire Size Insulation Diameter Strip Length AWG mm² mm In. mm

More information

ITEM Pipe Thread Kit (10 Piece Set - 7 Dies) Assembly and Operating Instructions

ITEM Pipe Thread Kit (10 Piece Set - 7 Dies) Assembly and Operating Instructions ITEM 94098 Pipe Thread Kit (10 Piece Set - 7 Dies) Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 2006 by Harbor Freight Tools. All rights reserved. No portion

More information

Planishing hammer stand For use with SKU Planishing hammer

Planishing hammer stand For use with SKU Planishing hammer Planishing hammer stand For use with SKU 94847 Planishing hammer Model 96300 Assembly And Operation Instructions Please Note: Planishing Hammer not included with Stand. Due to continuing improvements,

More information

Big Sky Counter Height Table

Big Sky Counter Height Table LOT NUMBER: ATE PURCHASE: / / Big Sky Counter Height Table Model # BSKY-6806 AULT ASSEMBLY REQUIRE If you have any questions regarding assembly or if parts are missing, O NOT return this item to the store

More information

Samford Contemporary Computer Desk Model # JCS AD

Samford Contemporary Computer Desk Model # JCS AD LOT NUMBER: DATE PURCHASED: / / Samford Contemporary Computer Desk ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding

More information

SB-WM-ART2-L-BL SB-WM-ART2-XL-BL

SB-WM-ART2-L-BL SB-WM-ART2-XL-BL SB-WM-ART2-L-BL SB-WM-ART2-XL-BL Weatherproof Universal Dual-Arm Articulating Mount for Large TVs INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 150 lbs (68.04 kg). Use with heavier

More information

ELECRAFT Application Note

ELECRAFT Application Note ELECRAFT Application Note Front Panel Microphone Circuit Modification Revision A, November 12, 2008 Copyright 2008, Elecraft, Inc., All Rights Reserved Background Some K3 owners have noted distorted transmit

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63819-0400 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

HAND CRIMP TOOL SPECIFICATION SHEET Order No

HAND CRIMP TOOL SPECIFICATION SHEET Order No HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-5200 TYPE 2C FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly

More information

10. Do not install within 10 feet of a pool, spa, or fountain. 4. Keep lamp away from materials that may burn.

10. Do not install within 10 feet of a pool, spa, or fountain. 4. Keep lamp away from materials that may burn. 1. Do not touch fixture while lamp is on. Turn off/unplug and allow to cool before replacing lamp. 9. Remove any debris or build-up accumulated on the faceplate or lens periodically. Replace lens if necessary.

More information

( ) CanPRO. Recommended Handle Turns: Can Size Diameter Handle Turns #2 3" 3 Revolutions #5 5" 5 Revolutions #10 6" 6 Revolutions.

( ) CanPRO. Recommended Handle Turns: Can Size Diameter Handle Turns #2 3 3 Revolutions #5 5 5 Revolutions #10 6 6 Revolutions. 56050 - ( ) CanPRO OPERATING INSTRUCTIONS Important 1. To get the best operation and life from your machine, please read and comply with these instructions. 2. Clean machine thoroughly before and after

More information

REPLACING THE CAT SEAL IN THE 90AD EXTRUDER

REPLACING THE CAT SEAL IN THE 90AD EXTRUDER T S B D S D 0 0 0 4 T E C H N I C A L S E R V I C E B U L L E T I N REPLACING THE CAT SEAL IN THE 90AD EXTRUDER 1-8 0 0-2 7 8-3 3 5 3 w w w. j c s t e e l e. c o m 2018 J.C. Steele & Sons, Inc. SAFETY

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet HAND CRIMP TOOL Application Tooling Specification Sheet TYPE 4D Order No. 63827-1500 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping

More information

Electric Guitar Kit DC Style electric guitar kit

Electric Guitar Kit DC Style electric guitar kit Electric Guitar Kit DC Style electric guitar kit user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet:

More information

Steele TV Stand Stock # BH

Steele TV Stand Stock # BH LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store

More information

User guide ProHead Plus

User guide ProHead Plus User guide ProHead Plus For other languages visit: /support ProHead Plus 2 Congratulations on your new Profoto product! Thanks for showing us your confidence by investing in a ProHead unit. For more than

More information

GC-1032 Metal Detector OWNER S MANUAL

GC-1032 Metal Detector OWNER S MANUAL GC-1032 Metal Detector OWNER S MANUAL 1 With your GC-1032 metal detector, you can hunt for coins, relics, jewelry, gold, and silver just about anywhere. The detector comes with high sensitivity and strong

More information

7878 K940. Checkpoint Antenna. Kit Instructions. Issue B

7878 K940. Checkpoint Antenna. Kit Instructions. Issue B 7878 K940 Checkpoint Antenna Kit Instructions Issue B Revision Record Issue Date Remarks A July 7, 2009 First issue B Nov2013 Revised the Checkpoint installation procedures for 7878 and 7874 scanners Added

More information

PortableTM. Indoor Outdoor Clothesline. Owner s Manual. TO SUIT MODELS: PortableTM 170 PortableTM 120

PortableTM. Indoor Outdoor Clothesline. Owner s Manual. TO SUIT MODELS: PortableTM 170 PortableTM 120 PortableTM Indoor Outdoor Clothesline Owner s Manual TO SUIT MODELS: PortableTM 170 PortableTM 120 Introduction Congratulations Congratulations on the purchase of your Portable Clothesline, which will

More information

Application Tooling Specification Sheet

Application Tooling Specification Sheet Tool Kit Order No. 63823-6470 FEATURES Application Tooling Specification Sheet Hand Crimp Tool Order No. 63823-6400 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically designed

More information

Operating Manual Riveting Tool R1. For installing blind rivet nuts

Operating Manual Riveting Tool R1. For installing blind rivet nuts L Operating Manual Riveting Tool R1 For installing blind rivet nuts Table of contents 1. Introduction 1.1 General instructions... 2 1.2 Description of the riveting tool... 3 1.3 Safety instructions...

More information

Johnny Apple Peeler VKP1010 VKP1011

Johnny Apple Peeler VKP1010 VKP1011 Johnny Apple Peeler VKP1010 VKP1011 TM Instruction Manual YOUR APPLE PEELER SHOULD INCLUDE THE FOLLOWING, DEPENDING ON THE MODEL. ii CONGRATULATIONS! You now own the world s finest apple/potato peeler.

More information

9 QUICK RELEASE WOODWORKING VISE

9 QUICK RELEASE WOODWORKING VISE 9 QUICK RELEASE WOODWORKING VISE 94386 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 349 Mission Oaks Blvd., Camarillo, CA

More information

Vanity Cabinets and Mirrors Installation and User Guide

Vanity Cabinets and Mirrors Installation and User Guide Vanity Cabinets and Mirrors Installation and User Guide MODEL NUMBERS 2451, 2452, 2454, 2455, 2457, 2459, 2453, 2456, 2458, 2460, 2470, 2473 Important :- Please quote the above model number(s) when ordering

More information

Dust RIGHT. Shop Vacuum Dust Hose Reel Instructions

Dust RIGHT. Shop Vacuum Dust Hose Reel Instructions Dust RIGHT Shop Vacuum Dust Hose Reel Instructions Review full instruction manual prior to use for important safety information. Always check Rockler.com to confi rm that you are using the most recent manual

More information

HAND CRIMP TOOL Specification Sheet Order No

HAND CRIMP TOOL Specification Sheet Order No HAND CRIMP TOOL Specification Sheet Order No. 63811-8200 FEATURES TYPE 4D A full cycle ratcheting hand tool ensures complete crimps Ergonomic soft grip handles for comfortable crimping A precision user-friendly

More information