VARIOCON. Modular Contact Inserts
|
|
|
- Griffin Pope
- 5 years ago
- Views:
Transcription
1 Modular Contact Inserts 1. Short The modular contact inserts are based on the triedand-tested COMBICON technology. They are available with the screw connection system and on the equipment side also as a solder in version. The sleeve or mounting contact inserts are snapped into the correct frames and are then simple to assemble and mount. The modules are easy to unsnap with a screwdriver. All contact inserts can be equipped with coding profiles. This rules out the possibility of mixing up several plug connectors. The modules can be individually labeled using the corresponding marker cards SK... Load current [A] Load current[a] Derating curve VC-TFS / VC-AML / VC-AMS Derating curve VC-TFS HC / VC-AML / VC-AMS Load current [A] Derating curve VC-TFS HC / VC-AML / VC-AMS Phoenix Contact GmbH & Co. KG 33 Blomberg, Germany Phone Fax
2 ,,, Sleeve Contact Insert with Screw Terminal Blocks Contact insert, for sleeve frames VC-TFS VC-TFS VC-TFS connector and header, Coding section, for VC-.../, is inserted into the groove on the header, CP-HCC 1 CP-MSTB Design VC-TFS VC-TFS VC-TFS Rated current [A] Rated voltage [V] 1 Rated surge voltage / insulation material group [kv] / / I / I. / I Connection capacity Solid / Stranded [mm ] / [mm ]. -. / / /.1-1. AWG / AWG - 1 / / / - 1 Multiple connection ( conductors with same cross section) Solid / Stranded [mm ] / [mm ]. -. / / /.1 -. AWG / AWG - 1 / / / - 1 Stranded with ferrule without plastic sleeve [mm ] / [mm ] AWG / AWG Stranded with TWIN ferrule with plastic sleeve [mm ] / [mm ] AWG / AWG - 1 Nom. voltage / nom. current / conduc. cross sec. UL: [V] / [A] / AWG / / 3-3 / / / / 3-1 CUL: [V] / [A] / AWG / / 3-3 / / / / 3-1 Torque [Nm] , 1, 1, 1,,3,3 VC-TFS VC-TFS VC-TFS Phoenix Contact page of
3 ,,, Mounting Contact Insert with Screw Terminal Blocks Contact insert, for panel mounting frames VC-AMS VC-AMS VC-AMS connector and header, Coding section, for VC-.../, is inserted into the groove on the header, CP-HCC 1 CP-MSTB Design VC-AMS VC-AMS VC-AMS Rated current [A] Rated voltage [V] 1 Rated surge voltage / insulation material group [kv] / / I / I. / I Connection capacity Solid / Stranded [mm ] / [mm ]. -. / / /.1-1. AWG / AWG - 1 / / / - 1 Multiple connection ( conductors with same cross section) Solid / Stranded [mm ] / [mm ]. -. / / /.1 -. AWG / AWG - 1 / / / - 1 Stranded with ferrule without plastic sleeve [mm ] / [mm ] AWG / AWG Stranded with TWIN ferrule with plastic sleeve [mm ] / [mm ] AWG / AWG - 1 Nom. voltage / nom. current / conduc. cross sec. UL: [V] / [A] / AWG / / 3-3 / / / / 3-1 CUL: [V] / [A] / AWG / / 3-3 / / / / 3-1 Torque [Nm] , 3, 3, 3, 3,,,,,, VC-AMS VC-AMS VC-AMS Phoenix Contact page 3 of
4 3, 3, 3, Mounting Contact Insert with 9 Angled Solder-In Pins Contact insert, for mounting panel frames VC-AML VC-AML VC-AML connector and header, Coding section, for VC-.../, is inserted into the groove on the header, CP-HCC 1 CP-MSTB Design VC-AML VC-AML VC-AML Dimensions solder-in pins [mm] x [mm] x.. x.. x. Hole diameter [mm] Rated current [A] Rated voltage [V] 1 Rated surge voltage / insulation material group [kv] / / I / I. / I Nom. voltage / nom. current / conduc. cross sec. UL: [V] / [A] / AWG / / 3 / / 3 / / CUL: [V] / [A] / AWG / / 3 / / 3 / /,,,,9,9 VC-AML VC-AML,9 VC-AML, Drilling diagram VC-AML Drilling diagram VC-AML Phoenix Contact page of Drilling diagram VC-AML
5 ,,,, 1, 11, 11, 3, 3,3 3,3,,, Mounting Contact Insert with Straight Solder-In Pins Contact insert, for panel mounting frames VC-AMLV VC-AMLV VC-AMLV connector and header, Coding section, for VC-.../, is inserted into the groove on the header, CP-HCC 1 CP-MSTB Design VC-AMLV VC-AMLV VC-AMLV Dimensions solder-in pins [mm] x [mm] x.. x.. x. Hole diameter [mm] Rated current [A] Rated voltage [V] 1 Surge voltage category / contamination class 1 ) III / 3 III / 3 III / 3 Rated surge voltage / insulation material group [kv] / / I / I. / I Nom. voltage / nom. current / conduc. cross sec. UL: [V] / [A] / AWG / / 3 / / 3 / / CUL: [V] / [A] / AWG / / 3 / / 3 / / 1 ) In the and -pos. constellation, as well as in the and -pos. versions, there is a reduction in the air and creepage distances. The contamination class is thus reduced to and the surge voltage category to II.,, 3, 3, VC-AMLV Drilling diagram VC-AMLV, 11, VC-AMLV,, Phoenix Contact page of Drilling diagram VC-AMLV, 11, 3, VC-AMLV,,, Drilling diagram VC-AMLV Phoenix Contact TNR:
SMKDSP 1,5/ 8. Extract from the online catalog. Order No.:
Extract from the online catalog SMKDSP 1,5/ 8 Order No.: 1733473 The figure shows a 10-position version of the product PC terminal block, Nominal current: 17.5 A, Nom. voltage: 250 V, Pitch: 5 mm, Number
MKKDSH 3/ 2. Extract from the online catalog. Order No.:
Extract from the online catalog MKKDSH 3/ 2 Order No.: 1721045 The illustration shows a 2-position version PC terminal block, Nominal current: 24 A, Nom. voltage: 250 V, Pitch: 5 mm, Number of positions:
SMKDS 2,5/ 2-5,08. Extract from the online catalog. Order No.:
Extract from the online catalog SMKDS 2,5/ 2-5,08 Order No.: 1705469 The illustration shows the 3-position version. PC terminal block, Nominal current: 20 A, Nom. voltage: 250 V, Pitch: 5.08 mm, Number
MSTB 2,5/ 4-ST. Extract from the online catalog. Order No.:
Extract from the online catalog MSTB 2,5/ 4-ST Order No.: 1754481 The figure shows a 10-position version of the product Plug component, Nominal current: 12 A, Nom. voltage: 250 V, Pitch: 5 mm, Number of
MVSTBW 2,5/ 5-ST. Extract from the online catalog. Order No.:
Extract from the online catalog MVSTBW 2,5/ 5-ST Order No.: 1792553 The figure shows a 10-position version of the product Plug component, Nominal current: 12 A, Nom. voltage: 250 V, Pitch: 5 mm, Number
MSTB 2,5/ 3-ST. Extract from the online catalog. Order No.:
Extract from the online catalog MSTB 2,5/ 3-ST Order No.: 1754465 The figure shows a 10-position version of the product Plug component, Nominal current: 12 A, Nom. voltage: 250 V, Pitch: 5 mm, Number of
MKDSN 1,5/ 4-5,08. Extract from the online catalog. Order No.:
Extract from the online catalog MKDSN 1,5/ 4-5,08 Order No.: 1729144 The figure shows a 10-position version of the product PC terminal block, Nominal current: 13.5 A, Nom. voltage: 250 V, Pitch: 5.08 mm,
KDSP 4. Extract from the online catalog. Order No.:
Extract from the online catalog KDSP 4 Order No.: 1780536 The figure shows a 1-pos. version of the product PC terminal block, Nominal current: 41 A, Nom. voltage: 320 V, Pitch: 7.5 mm, Number of positions:
KDS10/SO. Extract from the online catalog. Order No.:
Extract from the online catalog KDS10/SO Order No.: 1704059 The figure shows a 5-pos. version of the product PC terminal block, Nominal current: 76 A, Nom. voltage: 630 V, Pitch: 10 mm, Number of positions:
MC 1,5/ 4-ST-3,5. Extract from the online catalog. Order No.:
Extract from the online catalog MC 1,5/ 4-ST-3,5 Order No.: 1840382 The figure shows a 10-position version of the product Plug component, Nominal current:, Nom. voltage: 160 V, Pitch: 3.5 mm, Number of
FRONT 2,5-H/SA 5. Extract from the online catalog. Order No.:
Extract from the online catalog FRONT 2,5-H/SA 5 Order No.: 1700008 PC terminal block, Nominal current: 24 A, Nom. voltage: 250 V, Pitch: 5 mm, Number of positions: 1, Type of connection: Screw connection,
MVSTBR 2,5/ 2-ST. Extract from the online catalog. Order No.:
Extract from the online catalog MVSTBR 2,5/ 2-ST Order No.: 1792016 The figure shows a 10-position version of the product Plug component, Nominal current: 12 A, Nom. voltage: 250 V, Pitch: 5 mm, Number
MKDS 3/ 4. Extract from the online catalog. Order No.:
Extract from the online catalog MKDS 3/ 4 Order No.: 1711042 PC terminal block, Nominal current: 24 A, Nom. voltage: 400 V, Pitch: 5 mm, Number of positions: 4, Connection method: Screw connection, Mounting:
MCR-SL-CUC Universal current transducer. Data sheet _en_05. 1 Description
Universal current transducer Data sheet 104059_en_05 PHOENIX CONTACT 2011-03-09 1 Description MCR-SL-CUC-...-I and MCR-SL-CUC-...-U active current transducers convert DC, AC, and distorted currents into
UTTB 4. Extract from the online catalog. Order No.:
Extract from the online catalog UTTB 4 Order No.: 3044814 Feed-through modular terminal block, Cross section: - 6 mm², AWG: 26-10, Connection type: Screw connection, Width: 6.2 mm, Color: gray, Mounting
UTTB 2,5. Extract from the online catalog. Order No.:
Extract from the online catalog UTTB 2,5 Order No.: 3044636 Feed-through modular terminal block, Cross section: - 4 mm², AWG: 26-12, Connection type: Screw connection, Width: 5.2 mm, Color: gray, Mounting
DIK 1,5 General data Technical data General
General data Order number 2715966 Type DIK 1,5 Barcode number 4017918061715 Unit pack 50 Pcs. Customs tariff 85369010000 Technical data General Number of levels 3 Number of connections 4 Color gray Insulating
SLKK 5. Extract from the online catalog. Order No.:
Extract from the online catalog SLKK 5 Order No.: 0461018 Double-level terminal block with protective conductor foot, cross section: 0.2-4 mm², width: 6.2 mm, color: Gray Commercial data EAN 4017918002381
General data. Technical data DIKD 1,5. General. Dimensions
General data Order number 2715979 Type DIKD 1,5 Barcode number 4017918061722 Unit pack 50 Pcs. Customs tariff 85369010000 Technical data General Number of levels 3 Number of connections 6 Color gray Insulating
High-current terminal block - UKH
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
MULTI CONNECTION SYSTEM. Product Overview
MULTI CONNECTION SYSTEM Product Overview THE ENTIRE RANGE OF MCS CONNECTORS MICRO Pin spacing: 2. mm Conductor sizes: 0.08 0. mm 2 (28 20 AWG) The Most Compact MCS MICRO Connector System with CAGE CLAMP
AKG 4 GNYE. Extract from the online catalog. Order No.:
Extract from the online catalog AKG 4 GNYE Order No.: 0421029 The illustration shows a combination of versions AKG 4 BK, AKG 4 BU and AKG 4 GNYE Power terminal block, Load current : 41 A, Cross section:
Reflow Technology Product Overview
Reflow Technology Product Overview THR COMPONENT REQUIREMENTS THR Components Components for THR (Through-Hole Reflow) soldering must withstand higher temperatures than those found in standard wave soldering.
REFLOW TECHNOLOGY. Product Overview
REFLOW TECHNOLOGY Product Overview THR COMPONENT REQUIREMENTS THR Components Components for THR (Through-Hole Reflow) soldering must withstand higher temperatures than those found in standard wave soldering.
Subject to changes 11/2003 Page 1/7
Main Characteristics: Zero switching. LED display. Various connection systems. Plug-in control terminal. Degree of protection IP 2. Double-insulated design. General Data: Standards / Approvals DIN EN 697--3
EMD-FL-C-10. Current Monitoring Relay. Data Sheet. Functions. Structure 08/2004
Current Monitoring Relay Data Sheet 08/2004 Functions Structure Current monitoring of direct and alternating current in 1-phase networks with settable threshold values, starting override and response delay
Incandescent Lampholders: Edison Screw and Bayonet Cap
: Edison Screw and Bayonet Cap Table of Contents E14 22.223 22.230 E12 22.228 22.231 [08]..10 E17 E27 22.317 [08] 12 22.318 [08] 12, 13 2010-2012 This page is only valid in connection with the general
Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header
Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple
Specifications Approval Type M12 A-coded HARAX M12-L HARAX M12 L 5 poles shielded M12 Crimp General data Electrical characteristics Materials 03 21
M12 A-coding Specifications IEC 60 352-4 Approval A-coding acc. to IEC 61 076-2-101 Circular Connectors Technical characteristics M12 A-coding Type M12 A-coded HARAX M12-L 5 poles HARAX M12 L shielded
Feed-through terminal block - PT 10-TWIN
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
both pin and sleeve contacts.
The different modules are inserted into the appropriate retaining frames (which vary according to the different housing sizes). There they snap in easily and safely. A special removal tool ensures quick
QUINT-PS-24DC/24DC/10
QUINT-PS-24/24/10 QUINT - converter, primary switched mode, input: 24 V, output: 24 V /10 A INTERFACE Data Sheet PHOENIX CONTACT - 02/2006 Description The QUINT - converter 24 V/10 A converts the voltage
Data sheet. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Data sheet... W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Data sheet. W-Series WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Electronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet
CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication
Switching power supplies CP range, Linear power supplies CP-L range. Content
CP range, Linear power supplies CP-L range Content Switching power supplies, primary switch mode, CP range Benefits and advantages... 136 Approvals... 137 Ordering details... 138 Technical data... 11 Dimensional
Electronic timer CT-MXS.22 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MXS.22 Multifunctional with 2 c/o (SPDT) contacts The CT-MXS.22 is a multifunctional electronic timer from the CT-S range. It provides 5 timing functions, 2 times 10 time
Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
MINI-PS AC/24DC/1.3
Power supply unit INTERFACE Data sheet 102894_en_03 1 Description PHOENIX CONTACT 2015-11-17 Features MINI POWER power supplies for MCR technology In measurement and control technology (MCR), modular electronics
PHOENIX CONTACT - 09/2009
Electronic miniature circuit-breaker CLIPLINE Data sheet 03906_en_0 PHOENIX CONTACT - 09/2009 Description The EC-E... electronic miniature circuit-breaker selectively protects all 24 V DC load circuits
Three-phase monitoring relay CM-PFS
Data sheet Three-phase monitoring relay CM-PFS The CM-PFS is a three-phase monitoring relay that is used to monitor three phase mains for incorrect phase sequence and phase failure. All devices are available
Power supply CP-D 12/2.1
2CDC 271 025 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 12 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 2.1 A Rated output power
Electronic timer CT-SDS.22
CDC 0 F0t07 Features Rated control supply voltage 8 V DC, 0 V AC Single function timer with star delta change over One device includes 7 time ranges (0.0 s 0 min) n/o contacts LEDs for status indication
HARTING Han-Power T Solutions
HARTING Han-Power T Solutions Fields of Application HARTING industrial connectors are suitable in a wide variety of electronic and electrical applications. Power utilities Robotics Machine tool controls
Three-phase monitoring relay CM-PVE
Data sheet Three-phase monitoring relay CM-PVE The three-phase monitoring relay CM-PVE monitors the phase parameter phase failure as well as over- and undervoltage in three-phase mains. 2CDC 251 006 S0012
Current monitoring relays CM-SRS.1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 For single-phase AC/DC currents The CM-SRS.1 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
Data sheet. W-Series WDU 4 BL
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Contents. Han Hv ES / Han Hv E Technical characteristics Han Hv ES Technical characteristics Han Hv E Han 3 Hv ES
Contents S / Page Technical characteristics S............................. 04.10 Technical characteristics.............................. 04.11 3 S.............................................. 04.12 3...............................................
Datenblatt. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Data sheet. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Current monitoring relays CM-SRS.2 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 For single-phase AC/DC currents The CM-SRS.2 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
Three-phase monitoring relays CM-PFE and CM-PFE.2
Data sheet Three-phase monitoring relays CM-PFE and CM-PFE.2 The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251
No-wear isolation of potentials in terminal block design
TERMOPTO Overview No-wear isolation of potentials in terminal block design Space saving solid-state relay with PUSH IN connection technology The TERMOPTO opto modules are characterised by a particularly
Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with OFF-delay and 10 time ranges. All electronic timers from the CT-S
Han High Temp. Description. Design overview. Han High Temp connectors remain robust and reliable for their entire lifespan!
Han High Temp Description Han High Temp is a new product series that is based on our well-established Han B and Han E series. We used high-quality materials with wide temperature ranges to produce connectors
PHOENIX CONTACT
Selective circuit breaker CLIPLINE Data sheet 100464_en_05 PHOENIX CONTACT 2009-11-17 1 Description The electronic circuit breaker, which has a design width of just 12.5 mm, selectively protects all 24
Medium-base Lampholders
Medium-base Lampholders For HID Lamps Medium-base lampholders Material: porcelain, white Nominal rating: 4A/250V/5kV pulse rated Terminals: bushings with set screws 18 14AWG solid Screw shell insert: zinc-plated
PLC INTERFACE With Leakage Current and Interference Voltage Suppression
PLC INTERFACE With Leakage Current and Interference Voltage Suppression PLC- SO46 1. PLC INTERFACE, the super thin, plug-in, and flexible modular interface system with a user-friendly jumper system, now
PSD-S CE-TM SPRING. Connection element with spring-cage terminal blocks for tube mounting. Data sheet. 1 Description
Connection element with spring-cage terminal blocks for tube mounting Data sheet 7958_en_02 PHOENIX CONTACT 2015-05-04 1 Description This connection element is provided as a component of a modular signal
Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41
Data sheet Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41 The three-phase monitoring relays CM-PSS.x1 monitor the phase parameters phase sequence, phase failure as well as over- and undervoltage.
Power supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
HQ series the powerful little connectors
HQ series the powerful little connectors HQ series the powerful little connectors A small size ut quite ig. The electrical values speak for themselves. The HQs use the proven HE and HD crimp contacts as
Three-phase monitoring relays CM-PVS.81
Data sheet Three-phase monitoring relays CM-PVS.81 The three-phase monitoring relay CM-PVS.81 monitors the phase parameters phase sequence, phase failure as well as over- and undervoltage. The device is
Measuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC
2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from
Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
Tools for crimp contacts
Tools for crimp termination D-Sub-S, D-Sub-HD, DIN 41 612 Identification Service crimp tool standard contacts high density contacts Part No. 09 99 000 0175 09 99 000 0596 HARTING- Crimp tool for 500 bandoliered
Power supply CP-D 24/1.3
2CDC 271 027 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 24 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 1.3 A Rated output power
Electronic timer CT-MBS.22 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MBS.22 Multifunctional with 2 c/o (SPDT) contacts The CT-MBS.22 is a multifunctional electronic timer from the CT-S range. It provides 10 timing functions and 10 time ranges.
Electronic timer CT-WBS.22 Impulse generating and flashing with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-WBS.22 Impulse generating and flashing with 2 c/o (SPDT) contacts The CT-WBS.22 is a multifunctional electronic timer from the CT-S range. It provides 10 timing functions
ABB 1. Multifunctional three-phase monitoring relays. CM-MPS.11, CM-MPS-21, CM-MPS.31 and CM-MPS.41 Data sheet. Features. Approvals. Marks.
2CDC 251 048 F0t08 CM-MPS.11 2CDC 251 049 F0t08 CM-MPS.21 2CDC 251 050 F0t08 CM-MPS.31 2CDC 251 051 F0t08 CM-MPS.41 R/T: yellow LED - relay status, timing F1: red LED - fault message F2: red LED - fault
MINI MCR-SL-UI-I-LP-NC
2-way isolation amplifier Data sheet 105263_en_02 PHOENIX CONTACT 2013-12-13 1 Description The configurable 2-way isolation amplifiers are used to electrically isolate, convert and filter standard signals.
Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
Three-phase monitoring relays CM-PVS CM-PVS.31, CM-PVS.41 and CM-PVS.81
Data sheet Three-phase monitoring relays CM-PVS CM-PVS.31, CM-PVS.41 and CM-PVS.81 The three-phase monitoring relays CM-PVS.x1 monitor the phase parameters phase sequence, phase failure as well as over-
Current monitoring relays CM-SRS.2 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
CP-E range Benefits and advantages
Benefits and advantages Characteristics Output voltages 5 V, 12 V, 2 V, 8 V DC Adjustable output voltages Benefits Signalling output/contact Output currents 0.625 A / 0.75 A / 1.25 A / 2.5 A / A / 5 A
HARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02
Contents Page Technical characteristics circular connector with rapid termination 50.02 Circular connector M8/M12 with rapid termination... 50.05 Han M12 panel feed-through... 50.08 Han M12 pcb adapter...
Data Sheet GTD21148L SERIES 40W. (201) Switching Power Supplies
2. ELECTRICAL SPECIFICATIONS: INPUT VOLTAGE: INPUT CURRENT: OUTPUT VOLTAGE / CURRENT: MODEL: GTD21148L(M,H)-1703 GTD21148L(M,H)-2505 GTD21148L(M,H)-2506-X.X GTD21148L(M,H)-3009-X.X GTD21148L(M,H)-3512-X.X
Current monitoring relays CM-SRS.M1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.M1 For single-phase AC/DC currents The CM-SRS.M1 is an electronic current monitoring relay that monitors single-phase mains (DC or AC) for over- and undercurrent
Datenblatt. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
Electronic timer CT-MFS.21 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MFS.21 Multifunctional with 2 c/o (SPDT) contacts The CT-MFS.21 is a multifunctional electronic timer from the CT-S range. It provides 10 timing functions, 10 time ranges
Safety relays - PSR-SCP- 24DC/ESD/4X1/
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
SINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
Multifunctional three-phase monitoring relays CM-MPS CM-MPS.23
Data sheet Multifunctional three-phase monitoring relays CM-MPS CM-MPS.23 The three-phase monitoring relay CM-MPS.23 monitors the phase parameters phase sequence, phase failure, over- and undervoltage
Aluminium hinges DORMA LM. October 1999
Aluminium hinges DORMA LM October 1999 DORMA LM Engineered down to the smallest detail adaptable to any profile system The DORMA LM series of aluminium hinges has been developed to give fast, safe and
Electronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact The CT-TGD.12 is an electronic time relay with the function pulse generator. It is from the CT-D range. With their MDRC profile
CM-MPS.11, CM-MPS-21, CM-MPS.31 and CM-MPS.41 Data sheet. UL 508, CAN/CSA C22.2 No.14 GL GOST CB scheme CCC
2CDC 251 048 F0t08 CM-MPS.11 2CDC 251 049 F0t08 CM-MPS.21 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage as well as phase unbalance
Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with true OFF-delay and 10 time ranges. All electronic timers from
Three-phase monitoring relays
2CDC 251 046 F0t08 Features Monitoring of three-phase mains for phase sequence, phase failure, phase unbalance Threshold value for phase unbalance adjustable as absolute value Tripping delay can be adjusted
48 Series - Relay interface modules A. Features
Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive
PHOENIX CONTACT
Electronic circuit breaker CLIPLINE Data sheet 102898_en_03 PHOENIX CONTACT 2010-12-17 1 Description The electronic circuit breaker can be used in applications that cover all aspects of the switched-mode
Type CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
Electronic timer CT-MFS.21
2CDC 251 053 F0t07 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c Rotary switch for the preselection of the
Power supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
EMD-FL-3V-400. Electronic monitoring relay for voltage monitoring in three-phase networks. INTERFACE Data sheet _en_03. 1 Description.
Electronic monitoring relay for voltage monitoring in three-phase networks INTERFACE Data sheet 102110_en_03 1 Description PHOENIX CONTACT - 09/2009 Features Increasingly higher demands are being placed
Current monitoring relays CM-SRS.1 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
Electronic timer CT-SDE Star-delta change-over with 1 n/c + 1 n/o contact
Data sheet Electronic timer CT-SDE Star-delta change-over with n/c + n/o contact The CT-SDE is an electronic time relay with star-delta change-over. It is from the CT-E range. The CT-E range is the economic
Control module CP-A CM
2CDC 271 002 F0t05 Features Pluggable onto redundancy unit CP A RU Threshold values adjustable (14 28 V) One relay output per monitored input / channel Approvals H UL 508, CAN/CSA C22.2 No.14 H UL 60950,