Feed-through terminal block - PT 10-TWIN

Transcription

1 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid ( Feed-through terminal block, Connection method: Push-in connection, Cross section: - 16 mm², AWG: 20-6, Width: 10.2 mm, Height: 49.5 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15 Product Features The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors The compact design and front connection enable wiring in a confined space In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection Tested for railway applications Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 38.4 GRM Custom tariff number Country of origin Poland General Number of levels 1 Number of connections 3 Color gray Insulating material PA Inflammability class according to UL 94 V0 Area of application Railway industry Mechanical engineering Plant engineering Maximum load current 70 A (with 16 mm² conductor cross section) Rated surge voltage 8 kv 11/05/2014 Page 1 / 7

2 General Pollution degree 3 Surge voltage category Insulating material group Connection in acc. with standard IEC Maximum load current (lower level) Nominal current I N (lower level) Nominal voltage U N Maximum load current (upper level) Open side panel III I 70 A (with 16 mm² conductor cross section) 57 A 1000 V 70 A (with 16 mm² conductor cross section) Shock protection test specification DIN EN (VDE ): Back of the hand protection Finger protection Surge voltage test setpoint Result of surge voltage test Power frequency withstand voltage setpoint Result of power-frequency withstand voltage test Checking the mechanical stability of terminal points (5 x conductor connection) Bending test rotation speed Bending test turns 135 Bending test conductor cross section/weight Result of bending test Conductor cross section tensile test Tractive force setpoint Conductor cross section tensile test Tractive force setpoint Conductor cross section tensile test Tractive force setpoint Tensile test result ja guaranteed guaranteed 9.8 kv 2.2 kv 10 rpm / 0.3 kg / 2 kg 16 mm² / 2.9 kg 20 N 90 N 16 mm² 100 N Tight fit on carrier NS 35 Setpoint Result of tight fit test Result of voltage drop test Temperature-rise test Conductor cross section short circuit testing 5 N 11/05/2014 Page 2 / 7

3 Feed-through terminal block - PT 10-TWIN General Short-time current 1.2 ka Conductor cross section short circuit testing 16 mm² Short-time current 1.92 ka Short circuit stability result Ageing test for screwless modular terminal block temperature cycles 192 Result of aging test Proof of thermal characteristics (needle flame) effective duration 30 s Result of thermal test Test specification, oscillation, broadband noise DIN EN (VDE ): Test spectrum Service life test category 1, class B, body mounted Test frequency f 1 = 5 Hz to f 2 = 150 Hz ASD level (m/s 2 ) 2 /Hz Acceleration 0.8g Test duration per axis 5 h Test directions X-, Y- and Z-axis Oscillation, broadband noise test result Test specification, shock test DIN EN (VDE ): Shock form Half-sine Acceleration 5 g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Shock test result Temperature index, insulating material (DIN EN (VDE )) 125 C Static insulating material application in cold -60 C Dimensions Width Length Height Height NS 35/7,5 Height NS 35/ mm 88.9 mm 49.5 mm 50.5 mm 58 mm Connection data Connection in acc. with standard IEC Connection method Push-in connection Conductor cross section solid min. Conductor cross section solid max. 16 mm² 11/05/2014 Page 3 / 7

4 Connection data Conductor cross section AWG/kcmil min. 20 Conductor cross section AWG/kcmil max 6 Conductor cross section stranded min. Conductor cross section stranded max. Min. AWG conductor cross section, stranded 20 Max. AWG conductor cross section, stranded 8 Conductor cross section stranded, with ferrule without plastic sleeve min. Conductor cross section stranded, with ferrule without plastic sleeve max. Conductor cross section stranded, with ferrule with plastic sleeve min. Conductor cross section stranded, with ferrule with plastic sleeve max. 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. Stripping length Internal cylindrical gage 1.5 mm² 4 mm² 18 mm A6 Classifications ecl@ss ecl@ss ecl@ss ecl@ss ecl@ss ecl@ss ecl@ss ecl@ss ETIM ETIM 3.0 ETIM 4.0 ETIM 5.0 EC EC EC UNSPSC UNSPSC UNSPSC UNSPSC UNSPSC /05/2014 Page 4 / 7

5 Classifications UNSPSC UNSPSC GOST / UL Recognized / cul Recognized / GL / CSA / LR / GOST / VDE Zeichengenehmigung / IECEE CB Scheme / NK / BV / culus Recognized Ex IECEx / ATEX submitted Approval details GOST UL Recognized B C mm²/awg/kcmil Nominal current IN 60 A 60 A Nominal voltage UN 600 V 600 V cul Recognized B C mm²/awg/kcmil Nominal current IN 60 A 60 A Nominal voltage UN 600 V 600 V 11/05/2014 Page 5 / 7

6 Feed-through terminal block - PT 10-TWIN GL CSA B C mm²/awg/kcmil Nominal current IN 55 A 55 A Nominal voltage UN 600 V 600 V LR GOST VDE Zeichengenehmigung mm²/awg/kcmil Nominal current IN 57 A Nominal voltage UN 1000 V IECEE CB Scheme Nominal current IN Nominal voltage UN 57 A 1000 V NK BV culus Recognized 11/05/2014 Page 6 / 7

7 Drawings Circuit diagram Phoenix Contact all rights reserved 11/05/2014 Page 7 / 7