Shri Santoshi Industries.
|
|
- Allen Jennings
- 5 years ago
- Views:
Transcription
1 Shri Santoshi Industries. ALL APPROVES,TEST,CERTIFIED SOLDER WIRE TPES SOLDER WIRE =ROGIN BASE,UREA BASE,ACID BASE,NOCLEAN, SOLID,05% TO 99.99% TIN /LEAD WAVE SOLDERING, AUTO DIP M/C, SMALL POT, SOLDER ING POT,DIP MACHINCE PCB ASSEMBLING MACHINCE **COMPONENT,WIRE,PCB LEG CUTTING MACHICES CUT & BEND WIRESTRIPING WIRE CUTTING PRODUCTION LINE PRODUCTION / LEADCUTTING M/C* LEAD CUTTING CARBRITE BLADE MOUNTING LINE
2 .SOLDERING IRONS 5 WATT TO 500WATT,ROUND, WOOD,BLK SOLDERING BITS / ELEMENT /STANDS /TIP CLEANER MICRO SOLDERING STATIONS Smd Rework Station Lead Free Soldering Stations 60W 75W SAI-936 SAI-942 DX850 DX857 SAI 930 SAI7198
3 SPARES OF ALL TPE SOLDERING BIT, ELEMENT, TIP, HANDAL,IRON, 4WIRE 2WIRE ELEMENT MATERIAL HANDLING EQUPMENT TIPS BIT BITS Palastic bins /storage racks / trolly / bin rail /bins holder / MAGNIFER /USB MIRCO SCOPES /SCREW DRIVERS /TOOL KIT /ULTRACLEANER
4 ESD PRODUCTS WORK TABLES,STOREGE ESD BINS BOXES TESTING EQUPMENTS /grounding,wrist bands etc. FOOT WEAR /GLOVES PACKING / bags / form / posters. tapes BRUSHES CAPS / APRANS / dress PCB HOLDER racks,twister,products
5 S ONI S A LLO I NDUSTRIES. {SANTOSHIPRODUCT@GMAIL.COM} (SOLDERING FLUXE & PCBCHEMICALS ) FLUX NUMBER NC-500 NC-200 N.C-350 NC-200A NC-200B 200A Low VOC 200BVOC free TPE No-Clean No-Clean No-Clean No-Clean No-Clean No-Clean No-Clean FLUX CLASSIFICATION ORL0 J-STD-004 ORL0 ORL0 ORL0 ORL0 ORL0 ORL0 PHSICAL STATE Clear Liquid Clear Liquid Clear Liquid Clear Liquid Clear Liquid Clear Liquid SPECIFIC GRAVIT 0.795@25 C 0.81@25 C 0.794@25 C 0.81@25 C 0.816@25 C 0.940@25 C 2% 2% Clear Liquid 1.005@25 C SOLIDS CONTENT 5% 2% 3.5% 2% 2% COLOUR Straw Water Clear Straw Pale Straw Water Clear Water Clear Water Clear ACID NUMBER FLASH POINT(TCC) 16 C 22 C 25 C 25 C 21.5 C 65 C None SILVER CHROMATE TEST COPPER MIRROR CORROSION TEST RESIDUE Very small amount of residue, usually not noticed. Residue is non-conductive and tack free and does not interfere in accurate pin testing RESIDUE REMOVAL Often no cleaning is required. High degree of ionic cleanliness and high SIR can be achieved if the small amount of flux residue is removed by rinsing in cleaning solvent RECOMMENDED THINNER 811T 811T-LRF 910 Dissolvent 830 T 827T 819T 811T
6 JAI SANTOSHI MAA M/S:SHRI SANTOSHI INDUSTRIES CATLOUGE OF SOLDERING WIRE VOL:2 ( SANTOSHIPRODUCT@GMAIL.COM CONTACT NO: , , LEADFREE SOLDER WIRE, STICKS,PASTE ) 97/3 (TIN/COPPER) - SOLID SOLDER WIRE/ FLAME SPRA WIRE. 96.5/3.5 (TIN/SILVER) - SOLID SOLDER WIRE. (MP- 2210C) 99.3/0.7- (TIN/COPPER) - FLUX CORE / SOLID SOLDER WIRE. (MP C ) 96.5/3.5/0.5 (TIN/SILVER/COPPER) à â â œ FLUX CORE/ SOLID SOLDER WIRE. (MP 2170C to 2180C). SOLDERING PASTE SOLDERING WIRE STICKS
7 S ONI S A LLO I NDUSTRIES. {SANTOSHIPRODUCT@GMAIL.COM} (SOLDER ALLO TEMPERTURE CHART ) Alloy Properties The alloy temperature chart lists the alloys that are available from Soni s Alloy Ind.. This chart includes the alloy's melting temperature and lists the available forms for each alloy. SOLDER WIRE :-SOLID,NO CLEAN,ROSIN,RESIN, UREA, MULTICORE,ACID CORE, MAN MORE ALLO:TIN-LEAD MELTING RANGE F/ C WIRE /STICKS Sn63Pb37 361/183 ES 10GMS TO 500GMS PER PIC Sn60Pb / Sn50Pb / Sn40Pb / Sn30Pb / SN20PB / Sn15Pb / LEAD-FREE MELTING RANGE F/ C WIRE /STICKS 430/221 Sn96Ag / Sn95Ag / / / / / Sn99.3Cu /227 SAF-A-LLO / MELTING RANGE F/ C WIRE /STICKS Sn62Pb36Ag / Sn10Pb88Ag / Sn05Pb93.5Ag / Sn96.5Ag %Sn Sn95Sb05 K100LD Sn96.5Ag3.0Cu0.5 OTHER ALLOS CALL FOR AN , (SANTOSHIPRODUCT@GMAIL.COM)
8
9
10
11
12
13 SOLDERING STATIONS *weller * goots * hakko * ct brand * autotek *OKI Shri Santoshi IndustriesMobile / Cell Phone: +(91) / Website:
14 PLASTIC BINS,MATERIAL HANDLING BINS,SHELEVING SSTEMS
15
16 TWISTERS ESD BRUSH ELECTRIC SCREW ACCESSORIES TOOLS
17 HacksawS Hammer Pliers
18 Wrech Vices Sockets Screw drivers
19 Tool kit IMPORT TOOL KITS Mobile / Cell Phone: +(91) / Website:
20 Cutting and Stripping Machine Cutting and Stripping Machine We are manufacturing computerised cutting machine and stripping machine for processing the wire. The data for the wire gauge, stripping lengths on both the sides, the total length to be cut and lot size are programmed in the machine. Two wires are fed from one side. The machine cuts and Machine strips the wires automatically at the speed of approx. 150 pieces per minute. The range of wire covered is 12 to 30 AWG. We are the leading producer of cutting machine and stripping machine. Rs /- Automatic Wire Cutting, Stripping & Crimping Machines We offer automatic wire & cable cutting & stripping machine - kappa 310 FE, fully automatic wire cutting, stripping & crimping machine - gamma 252 SE, fully automatic wire cutting, stripping & crimping machine - gamma 333 PC and wire cutting machine. Apart from above machines we have range of automatic stripping machines, fully automatic crimping machine and wire cutting machines. Rs Kappa 310 The Kappa 310 is an ultra-compact and reasonably priced high-speed machine. It is designed for the reliable controlled processing of the finest wire sizes from 0.02mm2 to 6mm2. All process parameters can be saved along with applied pressure values. Power, performance and a new type of sensors are the three key features of the fully automatic Kappa cutting and stripping machines. Simple, intuitive controls allow these machines to be used efficiently in daily operation. Mobile / Cell Phone: +(91) / Website:
Welding 12 & Soldering
12 Welding & Soldering Electric Soldering Soldering Iron 2 Watt K&W Burn Proof Silicone Lead P733 $20.0 $18.0 Replacement Tip to Suit K&W 2 Watt Soldering Iron P7 $.13 $3.72 Weller WES1D Soldering Station
More informationPSU V2 for LawMate 500mW Transmitters. Assembly and Operation Manual
PSU V2 for LawMate 500mW Transmitters Assembly and Operation Manual Introduction Thank you for purchasing the V2 LawMate 500mW Power Supply. This power supply was specifically designed for the 500mW LawMate
More informationBuilding Tip TIP 1: Painting Metal You may want to superdetail your loco before painting. We suggest that you do not paint your loco until it is thoroughly track tested as disassembly and handling generally
More informationPSU for LawMate 500mW Transmitters. Assembly and Operation Manual
PSU for LawMate 500mW Transmitters Assembly and Operation Manual Introduction Thank you for purchasing LawMate 500mW Power Supply. This power supply was specifically designed for the 500mW LawMate transmitter
More informationHighest Value-For-Money Digital oldering Station Model DSSLF04HESD. Versatile production horse for different soldering applications, low running cost
Highest Value-For-Money Digital oldering Station Model DSSLF04HESD Versatile production horse for different soldering applications, low running cost Salient Features Power/Control unit has in-built following
More informationPractical Solutions for Successful Pb-Free Soldering. Brian Allder Qualitek-Europe
Practical Solutions for Successful Pb-Free Soldering Brian Allder Qualitek-Europe Challenges/Barriers to Lead Free Cost Material Availability Process Modifications Material Compatibility Standards Inspection
More informationWelding & Soldering. Hakko FA-400 Soldering Fume Absorber Ultimate in Bench-Top Extraction Kit includes 2 Filters (Replacement Filters Available)
12 Section 12 Welding & Soldering Electric Soldering Part No Soldering Iron 20 Watt Micron Burn Proof Rubber Lead 1.6mm Replacement tip to suit Micron 20 Watt Soldering Iron Soldering Iron Stand Heavy
More informationChallenges of Evolving Technology in the Workplace. Tips. Bubba Powers. Board Density. Best Rework Soldering Practices. Power. Substrates.
Real Estate Finishes Power Component Technology Board Density Tips Challenges of Evolving Technology in the Workplace Substrates Component Size Bubba Powers Manager of Technical Services Weller North America
More informationOperation Manual K
Operation Manual K104-0009 Please read these instructions completely before using this tool. By reading all the instructions you will get the maximum benefit and the best solder/welded joints. The K104-0009
More informationSelf Feeder. Soldering-Related Equipment and Materials. V-Groove Maker. Features. Packing List. Specifications. Option
Self Feeder V-Groove Maker Features Minimize solder and flux splash Cutting a V-groove on the solder surface enables the release of gas pressure generated by the flux, thereby suppressing splash. HAKKO
More informationThermal Wire Stripper
Thermal Wire Stripper Thermal Wire Stripper Blade not included Thermal wire stripper that ensures clean-cut removal of wire insulation High stripping perfmance ensures clean cut through highly heat-resistant
More informationELECTRICAL CONNECTIONS
ELECTRICAL CONNECTIONS Lesson 13 EET 150 Electrical Connections Learning Objectives In this lesson you will: see different methods of making electrical connections. learn a procedure for making soldered
More informationTable 1: Pb-free solder alloys of the SnAgCu family
Reflow Soldering 1. Introduction The following application note is intended to describe the best methods for soldering sensors manufactured by Merit Sensor using automated equipment. All profiles should
More informationLead-free Hand Soldering Ending the Nightmares
Lead-free Hand Soldering Ending the Nightmares Most issues during the transition seem to be with Hand Soldering Written By: Peter Biocca As companies transition over to lead-free assembly a certain amount
More informationAn Investigation into Lead-Free Low Silver Cored Solder Wire for Electronics Manufacturing Applications
An Investigation into Lead-Free Low Silver Cored Solder Wire for Electronics Manufacturing Applications Shantanu Joshi 1, Jasbir Bath 1, Kimiaki Mori 2, Kazuhiro Yukikata 2, Roberto Garcia 1, Takeshi Shirai
More informationunit 3: GENErAL ElectriCAL SySTEM DiAGNOSiS
Electrical/Electronic Systems unit 3: GENErAL ElectriCAL SySTEM DiAGNOSiS lesson 4: wire and connector repairs I. Connector repairs A. Connector repairs involve fixing damaged wires. Wires are marred due
More informationInduction Heater Coil Kit Compact low voltage, high current induction coil
Induction Heater Coil Kit Compact low voltage, high current induction coil Model: CT-400-KIT Features and Specifications High power water cool-able copper coil PCB Layout designed to reduce eddy losses
More informationRAY S REWORK SECRETS TRAINING CERTIFICATION TEST (DVD-13C) v.3
This test consists of twenty multiple-choice questions. All questions are from the video: Ray s Rework Secrets (DVD-13C). Each question has only one most correct answer. Circle the letter corresponding
More informationDIODE / TRANSISTOR TESTER KIT
DIODE / TRANSISTOR TESTER KIT MODEL DT-100K 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Assembly and Instruction Manual Elenco
More informationRepairing your Porsche 928 Central Warning System (CWS) controller
Repairing your Porsche 928 Central Warning System (CWS) controller Disclaimer: This procedure is for a 1984 Porsche 928 S controller. Overview: Under the left foot pedal (dead pedal) of the Porsche 928
More informationTerminating D /-0289 Subminiature SolderTact Contacts to Twisted-Pair Cable
Print 12-Jun-03 1 of 11 Terminating D-602-0288/-0289 Subminiature SolderTact Contacts to Twisted-Pair Cable 1. Purpose and Scope This engineering standard contains the termination procedures, inspection
More informationInstallation tutorial for Console Customs Xbox Mode Dual Button (RFX-5B) Rapid fire Microchip for all Wired and Wireless controllers
Installation tutorial for Console Customs Xbox 360 5-Mode Dual Button (RFX-5B) Rapid fire Microchip for all Wired and Wireless controllers This tutorial is designed to aid you in installation of a console
More informationALPHA EF-6103 Low-Solids, High-Reliability, Pin-Testable, Lead-Free/SnPb Wave Flux
DESCRIPTION ALPHA EF-6103 is an alcohol based flux designed to optimize solderability and reliability. It is formulated for both standard and thicker, high-density PCBs in both Lead-free (standard SAC
More informationCornerstone Electronics Technology and Robotics I Week 19 Soldering Tutorial
Cornerstone Electronics Technology and Robotics I Week 19 Soldering Tutorial Administration: o Prayer o Turn in quiz o Using fixed resistors design and build a voltage divider divides 5 volts in half.
More informationV349 (CLF5043) Halide Free No Clean Core Wire Fine Wire Applications
Pb V349 (CLF5043) Halide Free No Clean Core Wire Fine Wire Applications INTRODUCTION Viromet* 349, with a composition of Sn/Ag/Cu/In + X, is one of the high-performance lead free solder available in the
More informationCATALOG CLASSIC Series 15.0
www.tekserve.com.tw CATALOG CLASSIC Series 15.0 ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 The power of experience More than 80 years of experience have placed
More informationCapacitor Terminations. and Soldering Recommendations
I. TERMINATION TYPES Our capacitors are delivered with one of the following terminations (for technical reasons, only a limited number of termination types are available in certain cases). All our terminations
More informationUnit 12 Soldering. INTC 1307 Instrumentation Test Equipment Teaching Unit 12 Soldering
RICHLAND COLLEGE School of Engineering Business & Technology Rev. 0 W. Slonecker Rev. 1 (8/26/2012) J. Bradbury INTC 1307 Instrumentation Test Equipment Teaching Unit 12 Soldering Unit 12 Soldering 2002
More informationDIODE / TRANSISTOR TESTER KIT
DIODE / TRANSISTOR TESTER KIT MODEL DT-100K Assembly and Instruction Manual Elenco Electronics, Inc. Copyright 1988 Elenco Electronics, Inc. Revised 2002 REV-K 753110 DT-100 PARTS LIST If you are a student,
More informationExcellence. it s our passion. is more than a word
Excellence is more than a word it s our passion With roots in the world of metal stretching back over 75 years, AIM has evolved from humble beginnings into an international leader in the development, manufacture
More information100 TECH 01 BEAD BLASTER In 1992 I constructed a bead blasting cabinet and thought this might be of interest to club members.
In 1992 I constructed a bead blasting cabinet and thought this might be of interest to club members. After looking at bead blasting cabinets in several catalogues and Eric Rudd's in the flesh (or should
More informationProf. Steven S. Saliterman Introductory Medical Device Prototyping
Introductory Medical Device Prototyping Department of Biomedical Engineering, University of Minnesota http://saliterman.umn.edu/ You must complete safety instruction before using tools and equipment in
More informationPRODUCT PROFILE ELECTROLOY NO CLEAN LEAD FREE PASTE
PRODUCT PROFILE ELECTROLOY NO CLEAN LEAD FREE PASTE Product Name Product Code #515 LEAD FREE PASTE Sn99.0/Ag0.3/Cu0.7 EMCO#515-315P DOC CATEGORY: 3 PF EMCO#515-315P 14062010 REV.B Page 1 of 5 PRODUCT DESCRIPTION
More informationFor board-to-fpc. Narrow pitch connectors (0.4mm pitch)
Automation Controls Catalog For board-to-fpc Narrow pitch connectors (0.4mm pitch) F4 Series 5.0mm 4.1mm RoHS compliant FEATURES 1. 0.9 mm mated height low profile two-piece type connectors 2. Strong resistance
More informationETF2017. Handsoldering and IPC Standards ETF CM
ETF2017 Handsoldering and IPC Standards Handsoldering using suitable materials, methods and defined acceptance criteria What do You use Solder Alloy Flux Melting temperature Methods Soldertip temperature
More informationInstallation tutorial for Console Customs Xbox 360 Dual Rapid fire Microchip for wired and wireless controllers (all versions)
Installation tutorial for Console Customs Xbox 360 Dual Rapid fire Microchip for wired and wireless controllers (all versions) This tutorial is designed to aid you in installation of a console customs
More informationAssembly Instructions for SCA6x0 and SCA10x0 series
Technical Note 71 Assembly Instructions for SCA6x0 and SCA10x0 series TABLE OF CONTENTS Table of Contents...1 1 Objective...2 2 VTI'S DIL-8 and DIL-12 packages...2 3 Package Outline and Dimensions...2
More informationStained Glass Mission-Style Frame A stained glass project
Stained Glass Mission-Style Frame A stained glass project Stained Glass Mission-Style Frame A Stained Glass Project PROJECT TITLE: Stained Glass Mission-Style Frame SKILL LEVEL: (Adult 1-5: 1 being the
More informationSMT Assembly Considerations for LGA Package
SMT Assembly Considerations for LGA Package 1 Solder paste The screen printing quantity of solder paste is an key factor in producing high yield assemblies. Solder Paste Alloys: 63Sn/37Pb or 62Sn/36Pb/2Ag
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationSAFETY, SAFETY, SAFETY
Key Points Safety considerations. Cost considerations. Basic Tools used in everyday model railroading. Advanced Tools used in model railroading. Optional Homemade Tools SAFETY, SAFETY, SAFETY This hobby
More informationSmartlamp SINGLE LED Kit - Construction Manual
Smartlamp SINGLE LED Kit - Construction Manual With this construction manual and a Smartlamp Single LED Kit you can assemble your own solar lamp. It is recommended to first read the instructions before
More informationaccessories The perfect complement for soldering and desoldering jobs
accessories The perfect complement for soldering and desoldering jobs 44 KN- Nitrogen kit This is the ideal solution for improving the quality of any solder joint by using nitrogen because it provides
More informationTECHNICAL INFORMATION. S03X7Ca-56M
Lead free SOLUTIONS you can TRUST TECHNICAL INFORMATION Lead Free No-clean Flux Cored Solder Wire The normal alloy composition of the lead free rosin flux cored solder wires, is now dominated by SnAg3.0Cu0.5
More informationAssembly instructions of Dual Flat Lead Package (DFL)
1 (19) TECHNICAL NOTE Assembly instructions of Dual Flat Lead Package (DFL) TABLE OF CONTENTS 1 Objective...3 2 Dual Flat Lead Package (DFL)...3 3 DFL Package Outline and Dimensions...4 4 Tape and reel
More informationBetter Soldering (A COOPER Tools Reprint) Overview Solder and Flux Base Material
Better Soldering (A COOPER Tools Reprint) Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment. Overview Soldering is accomplished
More informationOverview of Soldering Assessment Programs
Overview of Soldering Assessment Programs 1 Objectives Provide a mechanism or program to evaluate the soldering and assembly skills of operators or applicants 2 Goals Provide Customer with the: Ability
More informationSBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
More informationHeavy Duty Station Ref. HD-B
www.jbctools.com Heavy Duty Station Ref. HD-B Safety It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - Do not use the units for any purpose other than
More informationSoldering Basics. Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment.
Soldering Basics Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment. Overview Soldering is accomplished by quickly heating
More informationAN114. Scope. Safety. Materials H AND SOLDERING TUTORIAL FOR FINE PITCH QFP DEVICES. Optional. Required. 5. Solder flux - liquid type in dispenser
H AND SOLDERING TUTORIAL FOR FINE PITCH QFP DEVICES Scope This document is intended to help designers create their initial prototype systems using Silicon Lab's TQFP and LQFP devices where surface mount
More informationAssembly instructions for the CS-1 ChemShield
Page 1 Of 6 Assembly instructions for the CS-1 ChemShield What is S.M.D SMD=Surface mount devices, like all the components does not have leads, but gets soldered onto flat solder pads. The CS-1 assembly
More informationAssembly and User Guide
Assembly and User Guide AtariPunkr is an adjustable stepped tone generator. AtariPunkr provides hours of fun everyone! Powered by: 9V Battery Outputs: Mylar Speaker (Included) Stereo Output (3.5mm Jack)
More informationww w.jbctools.com CATALOGUE CLASSIC Series 12.0 THE POWER OF EXPERIENCE
ww w.jbctools.com CATALOGUE CLASSIC Series 12.0 THE POWER OF EXPERIENCE ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 the power of experience More than 80 years of
More informationOpenROV. Guide 3 - Electronics. We will now move to the assembly of the electronics that will control the ROV. Written By: OpenROV
OpenROV Guide 3 - Electronics We will now move to the assembly of the electronics that will control the ROV. Written By: OpenROV 2017 openrov.dozuki.com Page 1 of 33 INTRODUCTION We will introduce soldering
More informationAssembly Instructions for SCC1XX0 series
Technical Note 82 Assembly Instructions for SCC1XX0 series TABLE OF CONTENTS Table of Contents...1 1 Objective...2 2 VTI's 32-lead Dual In-line Package (DIL-32)...2 3 DIL-32 Package Outline and Dimensions...2
More informationApplication Note 5334
Soldering and Handling of High Brightness, Through Hole LED Lamps Application Note 5334 Introduction LEDs are well known for their long useful life compared to conventional incandescent bulb. If an LED
More informationElectronics Merit Badge Class 4. 12/30/2010 Electronics Merit Badge Class 4 1
Electronics Merit Badge Class 4 12/30/2010 Electronics Merit Badge Class 4 1 Soldering Safety Note: A Soldering Iron gets hotter than 374 F. Do not touch the soldering iron s metal parts or you will receive
More informationIntroduction to Soldering
Introduction to Soldering The Soldering Iron American Standard Wire Gage (AWG) Solder The Soldering Process Stripping & Tinning Wire Connecting/Soldering Wire Component Soldering De-Soldering Lab Exercise
More informationFor board-to-fpc. Narrow pitch connectors (0.4mm pitch)
Automation Controls Catalog For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4F Series 3.0mm 2.4mm RoHS compliant FEATURES 1. 0.6 mm mated height low profile two-piece type connector 2. Space-saving
More informationEET 150 Introduction to EET Lab Activity 6 Introduction to Wire Splicing and Soldering
Required Parts, Software and Equipment Parts None for this activity EET 150 Equipment Required Hookup wire (22 AWG) Wire cutter/stripper Soldering Iron* Soldering Iron Stand* Solder (Use standard lead/tin
More informationmcube WLCSP Application Note
AN-002 Rev.02 mcube WLCSP Application Note AN-002 Rev.02 mcube, Inc. 1 / 20 AN-002 Rev.02 Guidelines for Printed Circuit Board (PCB) Design and Assembly with mcube Wafer Level Chip Scale Package (WLCSP)
More informationOperating tools. with partially insulated shaft Type 1, 2 and 3 in set
Accessories 40 Accessories 41 Operating Tools 42 45 Operating Tools WINSTA 46 47 Disconnection Tools 48 Cable Strippers 500 Wire Strippers 501 Cable Cutters 502 Crimping Tools 502 503 Test and Measurement
More informationSAW-PIERCING. 79. Fig. 29. Placing new blade in saw-frame.
SAW-PIERCING. 79 First make a full-size drawing of the hinge, then by means of transfer paper transfer the design of the butt end to the copper or brass. Then lay out the knuckles as shown in Fig. 28,
More informationMETAL DETECTOR KIT MODEL K-26. Assembly and Instruction Manual ELENCO
METAL DETECTOR KIT MODEL K-26 Assembly and Instruction Manual ELENCO Copyright 2012, 1989 by Elenco Electronics, Inc. All rights reserved. Revised 2012 REV-F 753226 No part of this book shall be reproduced
More informationBrewsBySmith.com STC DIY Kit
BrewsBySmith.com STC-1000 + DIY Kit Contact Information: Greg Smith www.brewsbysmith.com greg@boostbysmith.com I. Hardware Included: STC-1000 flashed with latest software (v1.06 currently) (if purchased)
More informationThe Multicore line of solder pastes is designed to meet the rigorous demands of a variety of electronic manufacturing soldering processes. Whether your process requires long abandon times, wide process
More informationAdvanced Automation. by the soldering experts. Highest precision. Superior reliability. Increased productivity. All from one source.
Advanced Automation by the soldering experts Highest precision. Superior reliability. Increased productivity. All from one source. WTBR 1000 BENCHTOP ROBOT More than half a century of experience in soldering
More informationSoldering Methods and Procedures for Vicor Power Modules
APPLICATION NOTE AN:208 Soldering Methods and Procedures for Vicor Power Modules Lead-Free Pins (RoHS); TIN / LEAD PINS (see page 7) Contents Page Overview 1 Analysis of a Good Solder Joint 1 Soldering
More informationAdvanced Automation. by the soldering experts. Highest precision. Superior reliability. Increased productivity. All from one source.
Advanced Automation by the soldering experts Highest precision. Superior reliability. Increased productivity. All from one source. WTBR 1000 BENCHTOP ROBOT More than half a century of experience in soldering
More informationPS4. Ragnarok Flex Modchip Installation Instructions.
PS4 Ragnarok Flex Modchip Installation Instructions Revised 11/25/2013 Tools needed PS4 Controller Viking PS4 Ragnarok Flex modchip DIY Kit (includes mod chip, LED board, and LED lense) Two diodes (included
More informationPremium Soldering station
www.jbctools.com English Premium Soldering station Ref. DIT-D 2 www.jbctools.com Packing List The following items should be included: DI Control Unit... 1 unit Stand... 1 unit Sponge... 1 unit Cartridge...
More information6043 DESIGN AND TECHNOLOGY
www.onlineexamhelp.com www.onlineexamhelp.com CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level MARK SCHEME for the October/November 2013 series 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1, maximum
More informationHow to solder SMD component on Awesome PCB or any other kind of PCB.
How to solder SMD component on Awesome PCB or any other kind of PCB. Step by step tutorial, with no steps to skip. Step 1 - What do we need? Step 2 - Fixing PCB Step 3 - Preparing for soldering Step 4
More informationCATALOGUE CLASSIC Series THE POWER OF EXPERIENCE
CATALOGUE CLASSIC Series THE POWER OF EXPERIENCE ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 More than 80 years of experience have placed JBC at the technological
More informationKASTLE v1.5 - Assembly Guide
last update: 14. 12. 2017 KASTLE v1.5 - Assembly Guide bastl-instruments.com INTRODUCTION Welcome to the assembly guide for the Kastle kit - mini modular synthesizer. It is suitable for beginners. It is
More informationWIRE PREPARATION TRAINING CERTIFICATION TEST (DVD-59C) v.1
This test consists of twenty-five multiple-choice / true-false questions. All questions are from the video: Wire Preparation (DVD-59C). Each multiple-choice question has only one most correct answer. Circle
More informationCreate cable assemblies to fit your style
2015 Feeney (11/15) Quick-Connect Brochure #2015-975B Create cable assemblies to fit your style Quick-Connect Solutions Guide The fast and easy way to create your own CableRail assemblies! Our CableRail
More informationSBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
More informationTool Kits. Discover more at rspro.com
Tool Kits 42 Piece Technicians Tool Kit RS ITEM # 136-3400 02 03 04 05 12 15 14 06 07 08 09 10 11 13 16 17 18 19 20 21 1 Double Open End Wrench - 5x5.5 / 6x7 / 8x10 mm 2 6 Piece Needle File Set 3 Gas Soldering
More informationLED Field Strength Indicator Kit
LED Field Strength Indicator Kit Description The Field Strength Indicator kit from Qrpkits.com provides a visual way to monitor RF fields through the brightness of an LED. It will respond to RF fields
More informationPI & T Attenuators. Version This document is for printed circuit board version 0.0a for both the PI and T attenuators.
PI & T Attenuators Version This document is for printed circuit board version 0.0a for both the PI and T attenuators. Overview & Features: The PI and T attenuators use 0805 resistors and for most values
More informationStationary Panel Replacement
Stationary Panel Replacement Product Series: 200 Series Product Type: Hinged Inswing Patio Doors Read these instructions before starting procedure. For additional information visit www.andersenwindows.com.
More informationTOOL KITS. THEY MATTER
TOOL KITS. THEY MATTER Discover more at se.rs-online.com/rspro 42 Piece Technicians Tool Kit RS ITEM # 1363400 02 03 04 05 12 15 14 06 07 08 09 10 11 13 16 17 18 19 20 21 1 Double Open End Wrench - 5x5.5
More informationCrimp tool Contact Pin contact Socket contact Stripping Outer wire size length mm insulation Ø
Hand Crimp Tool CCTfor stamped contacts Crimp tool Contact Pin contact Socket contact Stripping Outer wire size length mm insulation Ø CCT-MSS/SS-20 SS-20 330-8672-001 031-8703-001 3,6-3,8 1,8-2,4 CCT-MSS/SS-20
More informationTorque wrenches Combination tool for MMBX/MMCX/MCX-right angle connectors Special tools for QN connectors
ASSEMBLY TOOLS COTETS PAGE Crimping tools and inserts for flexible cables... 385 Tool boxes... 387 Tool sets for semi-rigid cable assembling (solder type)... 389 Selection of common and helpful assembly
More informationModifying a USB sound fob to act as a repeater interface for app_rpt
Modifying a USB sound fob to act as a repeater interface for app_rpt This document explains how to modify a USB sound fob to work as a repeater interface for app_rpt. The following materials and tools
More informationSMT - TRAINING COURSE
SMT - TRAINING COURSE MODEL SM-200K Surface Mount Technology Kit Assembly and Instruction Manual ELENCO Copyright 2016, 2000 ELENCO Electronics, Inc. Revised 2015 REV-P 753200 No part of this book shall
More informationTurkey Football Panel
Turkey Football Panel PROJECT TITLE: Turkey Football Turkey Football Panel A Stained Glass Project DESIGNED BY: Jeanne Baruth for Diamond Tech SKILL LEVEL: (Adult 1-5 1 being the easiest, 5 being difficult)
More informationCall Today Ship Today!
JUST LIKE HAVING IT ON THE SHELF MOLDS WELD METAL ACCESSORIES M-100 M-101 M-102 M-10 M-106 M-112 M-12 M-151 M-15 M-156 M-159 M-161 SAME DAY SERVICE ( Market) 15CP 25CP 25CI 32CI 5CI Mini- Clamp Flint Ignitors
More informationFig. 3 Photomicrograph of cleaning product residues.
George III Silver Microscope MHS Inventory No. 35086 A very decorative silver combined compound and simple microscope, made by George Adams c. 1763 for King George III. The classical base and pillar support
More informationTECHNICAL INFORMATION S3X 60NH
Lead free SOLUTIONS you can TRUST TECHNICAL INFORMATION Lead Free No-clean Flux Cored Solder Wire S3X 60NH 1. Features Excellent solderability offers good workability. Minimum flux spattering, easy separation
More information2.00AJ / 16.00AJ Exploring Sea, Space, & Earth: Fundamentals of Engineering Design Spring 2009
MIT OpenCourseWare http://ocw.mit.edu 2.00AJ / 16.00AJ Exploring Sea, Space, & Earth: Fundamentals of Engineering Design Spring 2009 For information about citing these materials or our Terms of Use, visit:
More informationSoldering iron. Analog type of HAKKO FX-951 Lock key enables temperature control even on this analog type unit Supports the N 2 system.
Soldering iron Analog type of HAKKO FX-951 Lock key enables temperature control even on this analog type unit Supports the N 2 system. Model No. FX950 Power consumption 75W Temperature range 200-450ºC
More informationupad Proto Base Assembly Guide v2.0
upad Proto Base Assembly Guide v2.0 Last Updated September 1, 2015 Table of Contents Preface... 3 Introduction... 3 Required Tools... 3 Flux Pen... 3 Soldering Iron... 3 Solder... 3 Diagonal Cutters...
More informationSOLDERING TO TRANSDUCERS
APPLICATION NOTE AN-13 SOLDERING TO TRANSDUCERS The purpose of this Application Note is to aid the user of Knowles transducers to: Provide good electrical connections to the transducer Avoid undesired
More informationSOLDERING & BRAZING SOLDERING & BRAZING
SOLDERING & BRAZING SOLDERING & BRAZING Soldering Cleaning pads 198 Electric soldering pliers 198 Electric soldering unit 199 Turbo soldering torches 200 Solder wire and solder paste 201 REMS Cu-Vlies
More informationPRODUCT DATA SHEET. ColorBright Color Changing. RGB 300 Series. Year Warranty.
PRODUCT DATA SHEET ColorBright Color Changing RGB 300 Series 5 Year Warranty www.flexfireleds.com Description The ColorBright Color Changing 300 LED strip light has double the amount of bright LEDs than
More informationMusic Thing Modular SimpleEQ Construction Guide (1206 version)
Music Thing Modular SimpleEQ Construction Guide (1206 version) Page 1 Useful Links The latest version of this doc and BOM can always be found at http://thonk.co.uk/documents/eq/ A build thread on the Muffwiggler
More informationINTRODUCTION. Tube and fitting
Service Application Manual SAM Chapter 630-41A Section 21 SOLDERING & BRAZING COPPER TUBE The Copper Development Association Inc. INTRODUCTION The material that follows is adapted from publications first
More information