Powerhose Plus Braided Brake and Clutch Lines & Components
|
|
|
- Delilah Butler
- 5 years ago
- Views:
Transcription
1 Powerhose Plus Braided Brake and Clutch Lines & Components Factory made & tested TUV approved Swivel ends for perfect alignment Chrome Stainless fittings Stainless steel braided hose Teflon inner tubing PVC covered in: Clear Black Carbon hite ed Orange Yellow Green 2
2 DEALER KIT All the hoses and fittings you need to cover a wide range of motorbikes, quads, scooters and specials. Supplied with 30 assorted hoses, ranging from 150mm to 725mm in length, plus a selection of fittings in stainless steel or high quality chrome plated finish. PART No. DESCRIPTION -3PPMERC30 Chrome Fittings -Kits available with Clear, Carbon or Black hoses DEALER BOX CONTENTS No DESCRIPTION PART No. No DESCRIPTION PART No. No DESCRIPTION PART No 6 STRAIGHT BANJO 3/ CU. WASHERS C mm LINE 3H BANJO 3/ T CONNECTOR mm LINE 3H BANJO 3/ mm LINE 3H mm LINE 3H BANJO 3/ mm LINE 3H mm LINE 3H SIDE BANJO 3/ mm LINE 3H mm LINE 3H x1 ADAPTOR 3/60100A 2 375mm LINE 3H mm LINE 3H x1 FEM. ADAPTOR 3/60100FA 2 400mm LINE 3H DOT 4.1 FLUID VBF x1.25 ADAPTOR 3/60125A 2 450mm LINE 3H STICKERS LARGE 4 10X1 BANJO BOLT D 2 475mm LINE 3H STICKERS SMALL 2 10X1 DOUBLE B/B D 2 500mm LINE 3H APPLICATIONS BOOK 8 10X1.25 B. BOLT D 2 525mm LINE 3H STORAGE BOX VT X1.25 DOUBLE B/B D 3 575mm LINE 3H0575 1
3 BANJO BOLTS DC 10X1 SINGLE DS 10X1 SINGLE STAINLESS DC 10X1.25 SINGLE DS 10X1.25 SINGLE STAINLESS ( FINISH ) DC 3/8 UNF SINGLE DS 3/8 UNF SINGLE STAINLESS DC 5/16 BSF SINGLE DS 5/16 BSF SINGLE STAINLESS DC 10X1 DOUBLE DS 10X1 DOUBLE STAINLESS DC 10X1.25 DOUBLE DS 10X1.25 DOUBLE STAINLESS ( FINISH ) DC 3/8 UNF DOUBLE DS 3/8 UNF DOUBLE STAINLESS DC 5/16 BSF DOUBLE DS 5/16 BSF DOUBLE STAINLESS 2
4 BANJOS (1/8 th BSP thread) 3/60081C STRAIGHT BANJO 3/60081S STRAIGHT BANJO STAINLESS 3/60082C 20º BANJO 3/60082S 20º BANJO STAINLESS 3/60087C 45º BANJO 3/60087S 45º BANJO STAINLESS 3/60086C 75º BANJO 3/60086S 75º BANJO STAINLESS 3/60084C 90º BANJO 3/60084S 90º BANJO STAINLESS 3/60184C 90º LONG NECK BANJO 3/60184S 90º LONG NECK BANJO STAINLESS 3/60184LC 90º LONG NECK & 20º SIDE BEND BANJO 3/60193C 90º SIDE BEND LONG NECK BANJO 3/60193S 90º SIDE BEND LONG NECK BANJO STAINLESS 3/60085C 20º SIDE BEND BANJO 3/60085S 20º SIDE BEND BANJO STAINLESS 3
5 3/60082LC 20º & 20º SIDE BEND LEFT BANJO 3/60082LS 20º & 20º SIDE BEND LEFT BANJO STAINLESS 3/60082RC 20º & 20º SIDE BEND BANJO RIGHT 3/60082RS 20º & 20º SIDE BEND BANJO RIGHT STAINLESS 3/60087LC 45º & 20º SIDE BEND LEFT BANJO 3/60087LS 45º & 20º SIDE BEND LEFT BANJO STAINLESS 3/60186RC 75º & 45º SIDE BEND RIGHT LONG NECK 3/60088S 3/60061C 3/60091C 7/16" I.D. STRAIGHT BANJO (FOR HARLEY DAVIDSON) 8mm STRAIGHT BANJO, (FOR SOME KTM BIKES) 6mm STRAIGHT BANJO, (FOR MAGURA HYMEC) STAINLESS 4
6 ADAPTORS 3/60100AC 10x1 x 1/8BSP ADAPTOR - CONVEX 3/60100AS 10x1 x 1/8BSP ADAPTOR - CONVEX STAINLESS 3/60100FAC 10x1 x 1/8BSP FEMALE ADAPTOR 3/60100FAS 10x1 x 1/8BSP FEMALE ADAPTOR STAINLESS 3/60125AC 10x1.25 1/8BSP ADAPTOR - CONVEX 3/60125AS 10x1.25 1/8BSP ADAPTOR CONVEX STAINLESS 3/60125FAC 10x1.25 1/8BSP FEMALE ADAPTOR 3/60125FAS 10x1.25 1/8BSP FEMALE ADAPTOR STAINLESS 3/60375AC 3/8UNF 1/8BSP ADAPTOR - CONVEX 3/60375AS 3/8UNF 1/8BSP ADAPTOR - CONVEX STAINLESS 3/60375FAC 3/8UNF 1/8BSP- FEMALE ADAPTOR 3/60375FAS 3/8UNF 1/8BSP- FEMALE ADAPTOR STAINLESS 3/70100AC 10x1 1/8BSP ADAPTOR CONCAVE 3/70100AS 10x1 1/8BSP ADAPTOR CONCAVE STAINLESS 3/70125AC 10x1.25 1/8BSP ADAPTOR CONCAVE 3/70125AS 10x1.25 1/8BSP ADAPTOR CONCAVE STAINLESS 3/70375AC 3/8UNF 1/8BSP ADAPTOR CONCAVE 3/70375AS 3/8UNF 1/8BSP ADAPTOR CONCAVE STAINLESS 3/60722AC 7/16 20 TPI x 1/8 BSP ADAPTOR CONVEX ( Not suitable for Harley Davidson; use 3/60716AC ) 5
7 BULKHEAD ADAPTORS 3/80100AC 3/80125AC 3/80375AC 10x1-1/8BSP MALE BULKHEAD ADAP CONVEX 10x1.25-1/8BSP MALE BULKHEAD ADAP CONVEX 3/8 UNF-1/8BSP MALE-BULKHEAD ADAP CONVEX BLEED NIPPLE SINGLE BANJO BOLTS DC 10X1 SINGLE DS 10X1 SINGLE STAINLESS DC 10X1.25 SINGLE DS 10X1.25 SINGLE STAINLESS DC 3/8UNF SINGLE DS 3/8UNF SINGLE STAINLESS BLEED NIPPLE DOUBLE BANJO BOLTS DC 10X1 DOUBLE DS 10X1 DOUBLE STAINLESS DC 10X1.25 DOUBLE DS 10X1.25 DOUBLE STAINLESS DC 3/8UNF DOUBLE DS 3/8UNF DOUBLE STAINLESS 6
8 BLEED NIPPLES SK BLEED NIPPLE 6 X 1 ZINC/FULL SK207252C BLEED NIPPLE 6 X 1 SK BLEED NIPPLE 7 X 1 ZINC/FULL SK BLEED NIPPLE 8 X 1.25 ZINC/FULL CONNECTORS 776C 1/8 BSP "T" CONNECTOR 776/BKT BRACKET FOR T CONNECTOR STAINLESS COPPER WASHERS C mm COPPER WASHER C mm 10 PACK C mm 50 PACK C108 8mm COPPER WASHERS BRAKE LIGHT SWITCHES L 10X1 SINGLE BANJO BOLT, WITH SWITCH L 10X1.25 SINGLE BANJO BOLT, WITH SWITCH L 3/8 UNF SINGLE BANJO BOLT, WITH SWITCH L 10X1 DOUBLE BANJO BOLT, WITH SWITCH L 10X1.25 DOUBLE BANJO BOLT, WITH SWITCH 7
9 P CLIPS CC2 P CLIP FOR SECURING HOSE OR CABLE HARLEY DAVIDSON FITTINGS DC 7/16 24 tpi BANJO BOLT DS 7/16 24 tpi BANJO BOLT STAINLESS DC 7/16 24 tpi DOUBLE BANJO BOLT DS 7/16 24 tpi DOUBLE BANJO BOLT STAINLESS C mm COPPER WASHER C mm COPPER WASHER 10 PACK C mm COPPER WASHER 50 PACK 3/60088S STRAIGHT BANJO FOR HARLEY STAINLESS 3/60716AC ADAPTOR CONVEX 7/16" 24 TPI x 1/8 BSP 8
10 STAINLESS STEEL BRAIDED LINES Suitable for brake and clutch lines and available in a range of colours. Unique to the Powerhose Plus system, factory made and tested with universal 1/8 th BSP female swivel ends and dash 3 hose. The lines are TUV approved and DOT registered in the USA. Components are manufactured from marine grade stainless steel for long lasting use. All lines are compatible with all 1/8bsp components listed. Lengths are available in 25mm increments from 100mm to 1700mm. Other lengths are available to order. PART No LENGTH PART No LENGTH PART No LENGTH 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 3H mm 9
The One Stop Shop for Automotive Plumbing
BQAP-0110 INNOVATIVE SOLUTIONS FOR AUTOMOTIVE PLUMBING The One Stop Shop for Automotive Plumbing Lab Tested - Tuff! AUTOMOTIVE PLUMBING Catalog www.brakequip.com Copyright 2010 $1.50 USA BRAKEQUIP Tube
670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Installation Instructions Road King Classic Saddlebag Bezels
Installation Instructions Road King Classic Saddlebag Bezels Thank you for your purchase of Bagger Audio Road King Classic Saddlebag Bezels for your Harley-Davidson motorcycle. We have carefully engineered
Serviceable Parts List RAIL MOUNT REV #WFS_01/16
Serviceable Parts List RAIL MOUNT REV #WFS_01/16 Table of Contents Using This Document...3 Introduction...3 Parts Ordering...3 Safety Notice...3 Total Assemblies and Installation Kits...4 Parts Lists...4
Catalogue : XS-Platforms
Catalogue : XS-Platforms Services Travaux Acrobatiques Sàrl Ch. de Bois-Riant 1-1661 Le Pâquier - 026 / 921 39 94 info@travauxacrobatiques.ch - www.travauxacrobatiques.ch XTS-SAFETY EYE Access to Innovation
MIG/MAG Welding Torch ABIMIG 645 W liquid-cooled
MIG/MAG Welding Torch ABIMIG 645 W liquid-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M ABICOR BINZEL. The right welding torch for every job! BINZEL air cooled welding torches incorporate
Parts Manual. Field-Pro Heavy Harrow Bar. Part Number H
Parts Manual Field-Pro Heavy Harrow Bar Part Number H28542-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however,
PLUMBING AND GAS PRODUCTS
BARCLAY ENGINEERING LTD PRODUCTION SPECIALISTS OF BRASSWARE,ALUMINIUM &STAINLESS STEEL 14-1 HORLOR STREET NAENAE P.O. BOX 3501 NAENAE LOWER HUTT 5041 NEW ZEALAND Phone: Fa: (04) 3 500 (04) 3 505 www.barclayengineering.co.nz
Simplex Baseboard System Baseboard System
Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products
Parts Manual 881 Hay Hiker
Parts Manual 881 Hay Hiker Part Number K20393P-06 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however, the quantity
12. Wings, Flaps, Ailerons and Struts
12. Wings, Flaps, Ailerons and Struts Fit Aileron Hinges Reference: Drawing 20270K2 Photo 12.1 Parts Required: 2007092 Aileron LS 200809N Aileron RS 2001394 Hinge 3/16 A1 (4) 2001694 Hinge Pin (4) PH0059N
8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
MIG/MAG Welding Torch ABIMIG 401 WT / ABIMIG 501 WT liquid-cooled, with divided liner
MIG/MAG Welding Torch ABIMIG 401 WT / ABIMIG 501 WT liquid-cooled, with divided liner C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The welding torch for every job! BINZEL liquid cooled welding
Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Moveable Workstations. Enterprise KEWAUNEE. encouraging new discovery...worldwide
Enterprise Moveable Workstations KEWAUNEE encouraging new discovery...worldwide Movable Workstations Self-supporting workstations Single and double sided Adjustable height worksurfaces Integrated shelving
Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench
Parts Included (per back to back bench) Column Kit: (x2) - 1 LH & 1 RH Column - Control Box - Hand Switch Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Depth Support Kit: -
ASSORTMENTS BRONZECLASSWB Above assortment with one #99901 Cabinet, 17 extra dividers, all drawers pre-labeld inside and out.
ASSORTMENTS 34 s BRONZECLASS Body Shop Fastener Starter 71 of the most popular items - Over 1700 pieces. Fasteners Only - No Bins Box Qty. 1 Inside of drawer BRONZECLASSWB Above assortment with one #99901
Hose Accessories. "Air King" 4 - Lug Quick-Acting Couplings. Hose End. Female N.P.T. End
"Air King" 4 - Lug Quick-Acting 1¼" 1½" AM16 AM AM6 AB16~ AB~ AB6 End Rubber Washers for 4-Lug AWR14 Fits all sizes 1¼" 1½" AM18 AM3 AM8 AB18~ AB3 AB8 Rated to 1 PSI Female N.P.T. End "Boss" clamps recommended
FITTINGS. Pneufit C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube
Ø 3 to 16 mm Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer). Nickel plated brass components. Pre-applied thread sealant on all taper threads and recessed captive
Thin Film Deposition
Thin Film Deposition Section Eleven 11 11.1 General Information 2 11.2 Deposition Monitors 3 11.3 Crystal Feedthroughs 4 11.4 s 5 11.5 Cables, s, Crystals & Accessories 6 Nor-Cal Products, Inc. 1967 South
Punch Type Clamps. 116 Clamp guards provide a smooth ID when applied to Punch-Lok center punch hose clamps. PUNCH-LOK SPECIAL ORDER NON-STOCK CLAMPS
Hose Scribe Punch Type Clamps Hose Scribe 114 HOSESCRIBE Hose Identification System The First Self-Contained,Computerized Hose Identification Tag engraving System Three Easy Steps 1. Insert one of three
Obsolete fastener specialist
Obsolete fastener specialist CLASSIC FASTENERS was established circa 1988 to supply 'obsolete' and just plain hard to get fasteners to restorers of automobiles and motorcycles via a mail order service.
Open Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
8" STEEL HOPPER AUGER
" STEEL HOPPER AUGER REF # PART # DESCRIPTION Sold By 1 01-00001 " or 10" HYDRAULIC MOTOR ea. 2 01-0000 O-RING ea. 000-01000 MANUAL FLOW CONTROL BLOCK c/w REF#2& ea. 010-00001 /1" x 2" SOCKET HEAD BOLT
Micro-Change. Cordset Family
Side Tab Cordset Family Small Space? Big Solution. When space and time are in short supply, look no further than Brad Harrison brand for the best, ready-made m connector solutions. For fast, compact migration
HOTSY High-Pressure Hose
HOSE & HOSE REELS HOTSY High-Pressure Hose For use with: hot or cold-water pressure washer here is no other high-pressure hose as tough as HOTSY s Tuff-Skin hose. When tested to ISO 6945 / DIN 20024, the
SARfinder MK3 Installation overview guide
SARfinder MK3 Installation overview guide thank you for purchasing a Sea Marshall Maritime Survivor Locating Device PLEASE READ THOROUGHLY IN CONJUNCTION WITH BASE UNIT OPERATOR MANUAL BEFORE PROCEEDING
MIG/MAG Welding Torch MB 26 KD air-cooled
MIG/MAG Welding Torch MB 26 KD air-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL air cooled welding torches incorporate the high quality
Fitting C.O. Adapter
ABS-DWV Fittings ABS/DWV Service Weight Pipe Schedule 30 Single step solvent cementing procedures no primer required. Excellent solvent cementing characteristics. Black. 84/Ctn. x h Hub Sanitary 0321612
Hydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic.
CONFORMANCE SAE J54 for hex nipples, expanders, elbows, tees and crosses SAE J54, J50 and J5 for bushing and plugs. Temperature Range -65 0 F to +400 0 F MATERIALS - SAE L4 carbon steel plated zinc with
Adhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases
equipment catalog 3-5 Bases Adhesive Bases Used for mounting on membrane or built-up roofs. Mounted with adhesive or plastic roofing cement. The cast base has a mechanical conductor connector. BS-C-3/8ID-ADH-AT
Tru products are now under the Tru-Win brand from Winchester Interconnect.
TRU MEIA Series Tru-Win MEIA offers the latest innovation in high power connector design. The MEIA interface provides equivalent kw power handling compared to similar EIA connector line sizes but provides
3 POINT HITCH LOGSPLITTER
3 POINT HITCH LOGSPLITTER OPERATOR S MANUAL AND PARTS LIST TABLE OF CONTENTS SECTION PAGE 1. GENERAL INFORMATION 1 2. SAFETY GUIDELINES 2 2.1 DEFINITIONS 2 2.2 SAFE OPERATING PROCEDURE 3 3. LOG SPLITTER
Torque wrenches Combination tool for MMBX/MMCX/MCX-right angle connectors Special tools for QN connectors
ASSEMBLY TOOLS COTETS PAGE Crimping tools and inserts for flexible cables... 385 Tool boxes... 387 Tool sets for semi-rigid cable assembling (solder type)... 389 Selection of common and helpful assembly
RBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
GENERAL ASSEMBLY TCR 2000/2 1:4 DRG 1368D 10 25/01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 7.5 kg D01-AH6 REV0 REV.
REVISION HISTORY REV. DATE APPROVED 0 Part Number DRG 1368D 10 Title of Part GENERAL ASSEMBLY 1:4 Scale Designed By Drawn By Checked By Approved By Surname Adam Migala E. Crichton B. Aitken Title of Project
MIG/MAG Fume Extraction Torch RAB Plus 240 D liquid-cooled. New, lighter, more flexible... BINZEL. The right welding torch for every job!
MIG/MAG Fume Extraction Torch RAB Plus 240 D liquid-cooled New, lighter, more flexible... C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The right welding torch for every job! BINZEL liquid-cooled
COAXIAL CABLE and FITTINGS SUMMARY RF CABLE ASSEMBLIES
SUMMARY RF CABLE ASSEMBLIES Custom Cable Assemblies Standard Cable Sets CABLE FITTINGS 7/8" Flexible Foam Dielectric, 50 Ohm Hoisting Stocking Grips 1/2" Flexible Foam Dielectric, 50 Ohm Bird-Proof Stainless
Today s Service Station
F I X IT Today s Service Station The Fixit includes all the tools necessary to perform basic bike repairs and maintenance, from changing a flat to adjusting brakes and derailleurs. The tools and air pump
CONTROLS KIT FOR ALL # & # HARLEY DAVIDSON SPORTSTER MODELS
INSTALLATION INSTRUCTIONS TC BROS. CHOPPERS PART #0-0075 & #0-0076 (No Pegs) FORWARD CONTROLS KIT FOR ALL 00-0 HARLEY DAVIDSON SPORTSTER MODELS If downloading & printing these instructions online, be sure
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
HYDRAULIC STEEL BRAKE LINES
36 B9 MISCELANEOUS HYDRAULIC STEEL BRAKE LINES DOMESTIC CAR AND TRUCK STANDARD INVERTED FLARE BOTH ENDS HYDRAULI STEEL BRAKE LINE B9-HL3008 3/16" 8" 10 B9-HL3012 3/16" 12" 10 B9-HL3020 3/16" 20" 10 B9-HL3030
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
THE CASCADE & SLINGER FUNSLIDES
THE CASCADE & SLINGER FUNSLIDES ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH CASCADE TM & SLINGER TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL INGROUND
Thin Film Deposition
Thin Film Deposition Section Eleven 11 11.1 General Information 2 11.2 Deposition Monitors 3 11.3 Crystal Feedthroughs 4 11.4 Crystal s 5 11.5 Cables, s, Crystals & Accessories 6 Nor-Cal Products, Inc.
DATA LINK ANTENNA SUMMARY
ANTENNA SUMMARY Spread Spectrum Dipole, 853 929 MHz NEXT G Modem, 825 890 MHz NEXT G and GSM Bands, 825 960 MHz and 1710 2190 MHz Stud Mount Dipole, 900 930 MHz Flexible Whip, 900 930 MHz Collinear, 1885
Index Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
A. Compatibility: Products shall be suitable for piping service fluids, materials, working pressures, and temperatures.
SECTION 22 05 16 LOOPS FOR PLUMBING PIPING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Obsolete fastener specialist
Obsolete fastener specialist CLASSIC FASTENERS was established circa 1988 to supply 'obsolete' and just plain hard to get fasteners to restorers of automobiles and motorcycles via a mail order service.
Thuys Engineering Parts Lists
Parts Lists The list below was developed for AJS parts, but all nuts and bolts are Cycle Engineering Institute threads that are common on all British motorcycles built before 1970. Contact Details FRAME
General Prisoner Transport Install Instructions PT-2-INST
General Prisoner Transport Install Instructions PT-2-INST 50 or 60 high x 80, 100 & 120 inch long / Double Compartment Inserts Also refer to PT-A-3XX instructions for vehicle specific mounting measurements
Times Microwave Systems Hermetically Sealed Assemblies
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 480.48 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
INSTALLATION INSTRUCTIONS GRILLE GUARD CHEVY TAHOE / AVALANCHE 1500/ SUBURBAN 1500 PART # /502795
(W) INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 502794/502795 PARTS LIST: 1 Grille Guard 2 12-1.75mm x 140mm Hex Bolts 2 Frame Mounting Brackets 8 12-1.75mm x 30mm Hex Bolts 2 Lower Support Brackets
BP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher.
November, 0 Lit. No., Rev. 0 BP-000 Brine Pro Brine Maker Parts List This Parts List is for BP-000 brine makers with serial numbers beginning with 00 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC FRAME
METRIC LIGHTNING PROTECTION PRODUCTS
Section 11 Metric Description... Page # 11.1 Taper Pointed Air Rods, Air Terminals & Attachments...270 11.2 Saddles & Attachments...271-272 11.3 s...273-275 11.4 Attachments...276-279 11.5 Clamps...280
FITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
Reusable fi ttings are only suitable for steel braided hoses, type R1 and R2.
Hydroscand Reusable Fittings Table Of Contents Product group 200 Ferrule Reusable fi ttings are only suitable for steel braided hoses, type R1 and R2. Ferrules for both skive and non skive assemblies are
0Introduction. TECHNICAL DOCUMENTATION 20/02/2009 PRESSURE Brake pressure PSI
TECHNICAL DOCUMENTATION 20/02/2009 PRESSURE Brake pressure Notes: technical documentation, dimensions and pinout of brake pressure sensors sensors 0-2000 PSI Release 1.01 0-2000 PSI 0Introduction 0-2000
DETAIL SPECIFICATION SHEET FITTINGS - INSTALLATION OF FLARED TUBE, STRAIGHT, THREADED CONNECTORS, DESIGN STANDARD FOR
INCH-POUND MS21344A 4 October 2016 SUPERSEDING MS21344 17 August 1971 DETAIL SPECIFICATION SHEET FITTINGS - INSTALLATION OF FLARED TUBE, STRAIGHT, THREADED CONNECTORS, DESIGN STANDARD FOR This specification
INSTALLATION INSTRUCTIONS PART#:17A045200MSS\17A045200MA MODULAR GRILL GUARD FOR FORD SUPER DUTY F250/F
INSTALLATION INSTRUCTIONS PART#:17A045200MSS\17A045200MA MODULAR GRILL GUARD FOR FORD SUPER DUTY F250/F350 08-09 1 guard, center section 1 brush guard, left side 1 brush guard, right side 1 wire guard
Spiderbeam Balun Construction Guide
BALUN CONSTRUCTION GUIDE Ver. 1.0 1 The components of the Balun Kit are in a plastic bag. Most of the components are inside the plastic case of the balun. The aluminum U-profile and the RG-142 Teflon Coax
S INGLE CIRCU I T 120V. LABELING: cul listed. GES Track Components. Flex Connector GES 23 GES 17. Dead Ends GES 41. (use with any connector)
S INGLE CIRCU I T 120V G E S 1 CIR 120V Power supply for ElectraLED track lighting fixtures Architectural grade, extruded aluminum housing Milled grounding bar provides continuous ground contact Continuously
Concealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
SERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
Brass Compression Fittings
15 Brass Compression Fittings Product Applications For use with potable water, instrumentation, hydraulic and pneumatic systems. Designed to be used with aluminum, copper and plastic tubing. Not recommended
INSTALLATION INSTRUCTIONS / DODGE RAM CREW CAB 2500/3500
INSTALLATION INSTRUCTIONS 225019 / 225019-2 2010 DODGE RAM CREW CAB 2500/3500 PARTS LIST: Qty Description Qty Description 1 Driver/Left Side Bar 4 Plastic Square Retainer 1 Side Bar 2 12mm x 120mm Hex
RPS. XR Front Drive Updates CORPORATION
FACTORY CAT 1. To start a replacement of the XR Front Wheel Drive, make sure the machine is on level ground with the rear wheels chocked and always disconnect the batteries. 2. Locate the Positive and
High Pressure LPG Hose 350 psi maximum working pressure. UL Listed E-350 sized for shipment by UPS.
High Pressure High Pressure LPG 350 psi maximum working pressure. UL Listed. 7132-25354E-350 sized for shipment by UPS. Size Size O.D. Spiral/Braid Wt./100 ft. Standard Reel Size 7132-25354 1/4" 0.610
How To Install Weather Pack Bulkhead Wire Connectors
How To Install Weather Pack Bulkhead Wire Connectors Weather Pack wire connectors are the premium line of environmentally sealed connectors from Delphi/Packard. The bulkhead series creates a secure and
INSTALLATION INSTRUCTIONS
TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS PART # RN-FOF1SCC-09-91 CUTLASS RUNNING BOARDS PARTS LIST: 5 STAINLESS AND ALUMINUM SIDEBARS 2 Left or right Sidebars 10 8-1.25mm x 30mm Hex Bolts 2 Driver/Left
Wire Mesh Cable Tray System for Channeling of Cable Wiring
Wire Mesh Cable Tray System for Channeling of Cable Wiring A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Wall Mount Ceiling Mount s
INSTALLATION INSTRUCTIONS PART#:17A096400MSS\17A096400MA MODULAR GRILL GUARD FOR TOYOTA TACOMA 05-09
INSTALLATION INSTRUCTIONS PART#:17A096400MSS\17A096400MA MODULAR GRILL GUARD FOR TOYOTA TACOMA 05-09 1 guard, center section 1 brush guard, left side 1 brush guard, right side 1 wire guard insert, left
Assembly, Installation, Operation and Maintenance Instructions Kit, Base Rail Bracket Part # 31852
. Assembly, Installation, Operation and Maintenance Instructions Kit, Base Rail Bracket Part # 31852 Dealer / Installer: Provide a copy of these instructions to the end user of this product. These instructions
Parts Manual 900 Hay Hiker
Parts Manual 900 Hay Hiker Part Number K49078-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however, the quantity
CAT GB. Quick-release couplings and accessories for Air Conditioning & Refrigeration. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0118-GB Quick-release couplings and accessories for Air Conditioning & Refrigeration UNI EN ISO 9001 Cert. n 905 ISO/TS 16949 Quick-release couplings and accessories for Air Conditioning & Refrigeration
New Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
UNIVERSAL BASES. #60UB - Universal Mounting Base. Same as above for 1/2 inside threads.
UNIVERSAL BASES #60U - Universal Mounting Base. This base can be used for vertical or horizontal mounting. Base is threaded for 3/8 inside threads. Made of bronze material for pastedown or fastening with
5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
PARTS LIST FOR MODEL 7000 SERIES - 17/46
ITEM PARTS LIST FOR MODEL 7000 SERIES - 17/46 1 Rotor 3 Housing 1 4 End Plate 6 Drive End Cover 1 7 Free End Cover 1 8 Timing Gear Set 1 9 Bearing, Drive End 10 Bearing, Free End 1 Lip Seal, Viton 4 13
QUANTUM DEVICES,INC. QPhase ISO 9001 DESCRIPTION TYPICAL APPLICATIONS DESIGN FEATURES
QUANTUM DEVICES,INC. Improving the Quality of Life through the Power in Light QPhase DESCRIPTION Quantum Devices, Inc. Model QDH20 provides an improved feedback solution in applications typically using
Enterprise ADAPTABLE. KEWAUNEE encouraging new discovery MOVEABLE WORKSTATIONS
Enterprise ADAPTABLE MOVEABLE WORKSTATIONS KEWAUNEE encouraging new discovery Freestanding Tables Self-supporting workstations Single and double sided Adjustable height worksurfaces Integrated shelving
FORD METER COUPLINGS AND ACCESSORIES SECTION H. Ford Meter Coupling and Accessory Numbering System L D - NL
FORD METER COUPLINGS AND ACCESSORIES SECTION Ford Meter Coupling and Accessory Numbering System TYPE OF COUPLING OR ACCESSORY C = Straight Coupling CF = Couplings for Flanged Meters CT = Couplings for
CABLES FOR MOTION CONTINUOUS-BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS PRE-ASSEMBLED CABLES STRAIN RELIEF DEVICES
CABLES FOR MOTION CONTINUOUS-BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS PRE-ASSEMBLED CABLES STRAIN RELIEF DEVICES FOR CABLE CARRIERS EDITION 09-2012 Durable, reliable, cost-effective
For Frequencies up to 110 GHz. RPC-1.00 Connectors TEST & MEASUREMENT
For Frequencies up to 110 GHz RPC-1.00 Connectors TEST & MEASUREMENT degs Bending test of RPC-1.00 cable assembly, standard length Bending Test 90 @ R = 1 inch Difference of phase (before-after bending)
Antennas and Wireless Accessories
Antennas and Wireless Accessories Description Page No. Antennas and Wireless Accessories see pages 1430 1434 www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2010 Cooper Crouse-Hinds
Table and Furniture Base Fittings Table Legs and Table Bases
Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:
DF-Series Pneumatic Couplings
Interchange Data: Parker 20-Series Manual Interchange (F-Series) Parker 30-Series Automatic Interchange (D-Series) Foster 3, 4, 5, and 6 Series Hansen 1000, 400, 500 (F-Series) Hansen 3000, 4000, 5000,
Mounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome
VIVOTEK SD83XXE Speed Dome Mounting Accessories AM-116/117 Pendant Pipe AM-118 Pendant Head AM-221 Gooseneck AM-231 Parapet Mount AM-519 Pendant Adaptor Installation Guide Corresponding part numbers: AM-116:
Sole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training
Sole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training Delivery Requirements Ground delivery Inside delivery to customer-specified location Unpack and assemble machine, and remove packing
Copyright 2005 Valmont Industries, Inc.
Hose Drag TOPIVIEW OF CART Universal 1 Left Guidance Support (4" H.D.) 1732080... Left Guidance Sumort.. 16". H.D.)... 1732138 2 Right Guidance Support (4" H.D.)... 1732081 Right Guidance Support (6" H.D.)...
Omnidirectional Antenna Vertical Polarization Indoor and outdoor use
db Omnidirectional Antenna and outdoor use 17 27 Omni 17 27 6 2dBi 8 41 N female Connector position Bottom or top 17 27 MHz SWR < 1.8 2 dbi Intermodulation IM < 15 dbc (2 x 4 dbm carrier) ertical 5 W (at
WORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
Diesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
Important Note. Tools Required: Welder capable of fully welding 10 GA.135 steel
INSTALLATION INSTRUCTIONS Frame Reinforcement Kit 11100 (Patent Pending) 1968-72 GM A-Body Coupe/Sedan Read Instructions FULLY before starting Installation Important Note Installation of this kit requires
Quality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated.
37006 Bevel protractors 0 - With degree graduation 0-180 and locking screw Normal steel chrome-plated, Scale glare-free matt-chrome-plated. 37006 Measuring/ Arc Ø Blade length 37006 80 120 101 120 150
FREE CLIMBER 4400 ASSEMBLY INSTRUCTIONS 27694B
FREE CLIMBER 4400 ASSEMBLY INSTRUCTIONS 27694B 1 TOOLS REQUIRED: CLAW HAMMER KNIFE 1/2 WRENCH OR SOCKET 1. USE KNIFE TO REMOVE ALL PLASTIC STRAPS FROM AROUND PALLET AND CARTON. STRAP 2. USE CLAW HAMMER
Combination Pliers. Pliers. Long Nose Pliers, straight. Bent Nose Pliers, 200 mm. Flat Nose Pliers, 160 mm 2013/2014
Combination Pliers - satin nickel plated - with slip guard/ soft grip handles - red/black 325 Combination Pliers, Length 165 mm 326 Combination Pliers, Length 175 mm 327 Combination Pliers, Length 200
Precision Universal Bevel Protractor, Set
ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...