System Width. Primary Panel. System Height. Panel Height " Finger Pulls Ht. from F.F. AWLS - PX - Exterior Elevation
|
|
- Harriet Rose
- 5 years ago
- Views:
Transcription
1 System Width X System Primary Panel Panel " Finger Pulls Ht. from F.F. ISION NOTES Pocket Width DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PX - Elevation HNDLE COLOR Panel Width View SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
2 System Width 5 5 Finished wall to finished wall Location for Removable Handle line of Head Track line of Head Track P Pocket Width 5 8 " Critical Dimension Rough Pocket Width Panel Width Rough Opening Width Panel in open condition Line of Bottom Track ISION NOTES DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PX - Plan Section HNDLE COLOR Clear Opening SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
3 3 9 Finished Floor to bottom of your Header Panel System System including Shim Space (Rough Opening ) " Handle Ht. from F.F. ISION NOTES Critical: 3 from F.F. to bottom of Bottom Track Critical: 3 from top of Bottom Track to F.F. DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PX - Vertical Section HNDLE COLOR 4 SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
4 Door Jamb System Patent #6,38,9 Wood framing - Weiland recommends engineered lumber Finished interior most pocket wall finished surface WLS Sash with Glass Stop & gaskets line of Head Track 56 5 " Finished wall to finished wall Center line of exterior most Track Follower with brushes, Face Interlock, gaskets, & Meeting daptor w/ Locking Pin Glass & glazing, per specs 3 9 Pocket Interlock with brush & gasket line of Head Track 26 7 " From mounting surface to center of Track 4 " From mounting surface to edge of Head Track Jacking Screws finished surface Finished exterior most pocket wall Wood framing - Weiland recommends engineered lumber Rough Pocket Width 8 5 " Critical Dimension Pocket Width Clear Opening/Panel Width Rough Opening Width ISION NOTES DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PX - Detail - Pocket Interlock HNDLE COLOR SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
5 line of Head Track 3 2 " Panel Width 5 8 " 3 Jamb with wood interior Jacking Screw Door Jamb System Patent #6,38,9 Customer's wall Glass & glazing, per specs line of Head Track WLS Sash with Finger Pull, gaskets, Glass Stop, & Removable Handle System Width Rough Opening Width 5 ISION NOTES DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PX - Detail - Side Jamb HNDLE COLOR SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
6 Door Jamb System Patent #6,38,9 Weiland recommends consulting your Engineer regarding engineered lumber or steel for your header 8" Header Blocking by others Jacking Screw Head Track with wood interior 2 4 " " Finished Floor to bottom of your Header Panel System System including Shim Space (R.O. ) Story Pole WLS Sash with gaskets & Glass Stop Glass & glazing, per specs ISION NOTES line of Jamb/Head Track DTE JOB NME SYSTEM TYPE - CONFIGURTION 3 9 WLS - PX - Detail - Head Track HNDLE COLOR line of Jamb/Head Track SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
7 Drainage Track Patent #7,007,343 line of Jamb/Head Track line of Jamb/Head Track Panel - F.F. to bottom of your Header Glass & glazing, per specs WLS Sash with gaskets, Glass Stop, & Wheel Kit " per foot slope 4 (min. required) begin at edge of Panel 3 Finished Floor to top of Track (CRITICL) including in Pocket Finished Floor Story Pole System System including Shim Space (R.O. ) 2 5 (CRITICL) Min. Slot Depth from Finished Floor 3 Finished Floor to bottom of Track 2" 2 " Shim Space Grout fill supporting Bottom Track and Flooring Customer supplied Drip Pan 4 Bridge Width -20 llthread (Washer & 4 Nut provided by others) Drainage Track ISION NOTES DTE JOB NME SYSTEM TYPE - CONFIGURTION WLS - PX - Detail - Bottom Track (Patented Flush Drainage) HNDLE COLOR SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
8 Drainage Track Patent #7,007,343 Pan Drain Isometric detail is provided as a cutaway for illustrative purposes only, not as a reflection of customer's actual track configuration. See plan details for true condition of bottom track. Unless otherwise specified, default is a staggered bottom track. If full track is required, track must be drainage track. Side Side Transverse Drain at Pocket/Wall (for pocketing/walled units) O.D. 5/8" I.D. /2" Tubing to connect to your exterior drain system (approximately 6" of tubing provided by manufacturer.) ISION NOTES DTE JOB NME SYSTEM TYPE - CONFIGURTION Liftslide - Generic Isometric Detail - Bottom Track (Patented Flush Drainage) HNDLE COLOR SCLE NTS DB ttention: Please take these drawings very seriously and make sure they are reviewed by all appropriate parties. By initialing this drawing you are stating that you understand and accept the dimensions on this drawing. These dimensions are the dimensions we will build to, no matter what is documented elsewhere! It is up to the customer to let us know what to build and this drawing is the final word in that process. gain, these dimensions supersede all previous ones! HNDLE TYPE DRWN BY Oceanside, C 92054
System Width O X X O. Primary Panel. Exterior View DUE TO SYSTEM EXCEEDING JOB NAME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRACKS.
System Width O X X O System Primary Panel Panel 39 3 8 " Finger Pull Ht. from F.F. ISION NOTES View DUE TO SYSTEM EXCEEDING JOB NME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRCKS. DTE SYSTEM TYPE
More informationSystem Width. System Height. Panel Height DUE TO SYSTEM EXCEEDING JOB NAME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRACKS.
System Width X X X System Primary Panel Panel 39 3 8 " Finger Pull Ht. from F.F. Pocket Width View ISION NOTES DUE TO SYSTEM EXCEEDING JOB NME 300", SPLITS WILL BE PRESENT IN THE TOP/BOTTOM TRCKS. DTE
More informationSystem Width. AWLS - OXX with 2 Screens - Exterior Elevation
System Width O X X System Primary Panel Panel 39 3 8 " Handle Ht. from F.F. ISION NOTES DTE Oceanside, C 92054 JOB NME SYSTEM TYPE - CONFIGURTION View WLS - OXX with 2 Screens - Elevation HNDLE COLOR NTS
More informationSystem Width. Panel Width. AWLS - O - Exterior Elevation
System Width O System Panel ISION NOTES DTE JOB NME Panel Width SYSTEM TYPE - CONFIGURTION WLS - O - Elevation HNDLE COLOR View SCLE NTS DB ttention: Please take these drawings very seriously and make
More informationSystem Width. System Height. AWLS - PXXXXX - Exterior Elevation
System Width System X X X X X Primary Panel Panel 39 3 8 " Handle Ht. from F.F. Pocket Width Panel Width View ISION NOTES DTE Oceanside, C 92054 JOB NME SYSTEM TYPE - CONFIGURTION WLS - PXXXXX - Elevation
More informationSystem Width. Panel Width
System X X System Primary Panel Panel 39 3 8 " Handle Ht. from F.F. ISION NOTES DTE Oceanside, C 92054 JOB NME SYSTEM TYPE - CONFIGURTION Panel LS - PXX-XXP 90 Corner Out - Elevation - Primary Side HNDLE
More informationICU TRACKLESS SLIDING DOOR
Interior View 0 Installation Instructions Tools Required: Screwdrivers Small Straight (Flat Blade) - for Terminal Block wiring # Phillips (Crosspoint) - for various #8, #0, and #4 screws Wrenches / Sockets
More informationLiftslide Install IN 8 STEPS STEP CHAPTER PAGE. 1 Overview 2. 2 Setting Up 2. 3 Bottom Track 4. 4 Head Track 6. 5 Side Jambs 7.
Liftslide Install IN 8 STEPS STEP CHAPTER PAGE 1 Overview 2 2 Setting Up 2 3 Bottom Track 4 4 Head Track 6 5 Side Jambs 7 6 Panels 7 7 Flooring, Sealing, & Caulking 9 8 System Care 10 weilandslidingdoors.com
More informationTechnical Guide M. MMultiSlide Doors. Technical Guide M1
Technical Guide M MultiSlide Doors M Technical Guide M1 Loewen MultiSlide MultiSlide doors provide large dramatic openings for the transition from indoor and outdoor living spaces. With an easy, smooth
More informationICU TRACK SLIDING DOOR
Interior View 0 Installation Instructions Tools Required: Screwdrivers Small Straight (Flat Blade) - for Terminal Block wiring # Phillips (Crosspoint) - for various #8, #0, and # screws Wrenches / Sockets
More informationESA-300 Full Breakout
Interior View 0 Installation Instructions For use with ESA II Controler DORMA AUTOMATICS, Inc. 94 Sherwood Drive Toll-Free: 877-67-6 DL844-00 Lake Bluff, IL 60044 Fax: 877-4-7999 Rev. /07 Tools Required:
More information6400, 8400 and 9400 Series Sliding Patio Door
Contemporary 3 Panel Classic 5 Panel French Panel 6400, 8400 and 9400 Series Sliding Patio Door (O) Fixed Panel Left (X) Operating / Mullion Panel Right (X) Operating / Lock Panel Left (O) Fixed Panel
More informationESA-100 Fixed Sidelite/Non Breakout
/Non Breakout Exterior View Installation Instructions For use with ESA II Controller 1 Tools Required: Suggested Fasteners Required - (Not supplied) Screwdrivers Small Straight (FlatBlade) - for Terminal
More informationLIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION
Landmark Builders of Montana LANDMARK RESIDENCE LIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION TABLE OF CONTENTS Site Preparation... 3 General Information... 5 Pre-Install Checklist... 6 Flush Track
More informationVYTEX PREMIUM SLIDING GLASS DOOR. Table of Contents. Precautions and Safety 2. Tools Required...3. Inspect and Prepare Door...4
VYTEX PREMIUM SLIDING GLASS DOOR Table of Contents Precautions and Safety 2 Tools Required...3 Inspect and Prepare Door...4 Hardware and Parts Check List....4 Master Frame Assembly 5 Master Frame Installation..7
More informationInstalling a Weiland Beefy Bifold
Installing a Weiland Beefy Bifold In 9 steps Table Of Contents 1. Overview 2 2. Setting Up 2 3. Bottom Track 3 4. Head Track and Side Jambs 4 5. Panels 4 6. Fine Tuning the System 5 7. Notes on Flooring
More informationStorefront Installation Guide INSTALLATION INSTRUCTIONS
STOREFRONT General Notes 1. Check contract documents and shop drawings, and understand and clarify any Field Verify Notes, approvals of drawings, and products required to be familiar with the project.
More informationContemporary 3 Panel Classic 5 Panel French Panel
Contemporary 3 Panel Classic 5 Panel French Panel (X) Operating / Lock Panel Left (O) Fixed Panel Right Note : Glazing Beads For All Panel Face To The Exterior 2 Panel XO Left Is Shown Above Opposite =
More informationSite Preparation Information for:
Site Preparation Information for: Product Series - Big Doors Product Type - MultiGlide Door Read these instructions and the Product Safety Information before starting procedure. For: MultiGlide Door Instructions/Videos
More informationINSTALLATION INSTRUCTIONS
www.marwincompany.com Kit Number Door Height Rough Opening Height KD200BB68 80 84 ½ KD200BB70 84 88 ½ KD200BB80 96 100 ½ INSTALLATION INSTRUCTIONS 200BB SERIES KD POCKET DOOR FRAME FOR 2 X 4 STUD WALLS
More informationESA-200 Fixed Sidelite
Exterior View Installation Instructions For use with ESA II Controller 1 Tools Required: Suggested Fasteners Required - (Not supplied) Screwdrivers Small Straight (FlatBlade) - for Terminal Block wiring
More informationHeavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More information463-GP. Swing Door. Technical Assistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) (Toll Free) 463-GP 5/06
463-GP Swing Technical ssistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) 1-877-723-7190 (Toll Free) PRTS LIST FRME PCKGE KEY DESCRIPTION PRT QTY SILL 855 1 JM 942 2 E MGNETIC
More informationLandmark Builders of Montana LANDMARK RESIDENCE TECHNICAL GUIDE L LIFTSLIDE DOORS
Landmark Builders of Montana LANDMARK RESIDENCE TECHNICAL GUIDE L LIFTSLIDE DOORS PRODUCT FEATURES STYLES Jamb or pocketing, single or multipanel systems in stacking, biparting or corner configurations.
More informationCurtain Wall Installation Guide
Curtain Wall Installation Guide Curtain Wall Installation Guide 1 IMPORTANT NOTICES! Important Notices & Information Manufacturer s Notes: The building envelope must be correctly prepared with weather
More informationLift & Slide W6400. (rev )
Copyright 2010 Pacific Architectural Millwork All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Pacific Architectural Millwork.
More informationINSTALLATION INSTRUCTIONS. Unit No. 126, 726 Classic Pivot Panel/Door/Panel Shower Enclosure
INSTALLATION INSTRUCTIONS Unit No. 126, 726 Classic Pivot Panel/Door/Panel Shower Enclosure QCI0027 Rev. 0 Page 1 of 10 Certified 11/07/2006 MAINTENANCE: Two primary materials are used to manufacture your
More information1. Begin by rolling your window up all the way 2. Remove your door and window handles by unscrewing the flat head set screws behind each handle.
1. Begin by rolling your window up all the way 2. Remove your door and window handles by unscrewing the flat head set screws behind each handle. 3. Remove the 12 screws that attach the steel interior door
More informationINSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
More information(773) INSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001) IMPORTANT INFORMATION & GL OSSARY ROUGH OPENINGS
Thank you for selecting C l i m a t e G u a r d products. Attached are our recommended installation instructions for Vinyl windows with an integral (2400-02) will not affect application of the ClimateGuard
More informationMULTISLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION
MULTISLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION TOOLS AND SUPPLIES 1 TOOLS CHECK LIST 1. laser level 2. hammer 3. pry bars 4. ladders 5. utility knife 6. screw gun 7. applicator foam gun 8. "j"
More informationSeries 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing)
Series 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing) Things to Know Before You Start Things to Know Before You Start Removal of Old Fenestration Products Ensure any old fenestration
More informationASSEMBLY AND INSTALLATION INSTRUCTIONS for Multi-Slide Door Systems (JII043) IMPORTANT INFORMATION AND GLOSSARY. Considerations Before Installation:
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Multi-Slide doors. Read these instructions thoroughly before beginning. They are designed to
More informationMulling & Transom General Installation Instructions
1. Overview: This document outlines general recommended instructions for combining Fleetwood s window and door products in the field. Additional detailed information on mulling and transoms is also available
More informationDear Contractor, I am glad that you are interested in our window rebate program.
Dear Contractor, I am glad that you are interested in our window rebate program. I have included three documents with this letter. One is our form to indicate your intention to participate in the program.
More information713C-GP. Pivot Door. Technical Assistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) (Toll Free) 713C-GP 8/06
713C-P Door Technical Assistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (Central Time) 1-877-723-7190 (Toll Free) PARTS IST FRAME PACKAE KEY DESCRIPTION PART QTY A SI A195 1 PIVOT JAM A196
More informationHow To Install Windows: Nail-Fin Application
How To Install Windows: Nail-Fin Application Required Tools & Materials: Materials: 1 3/4" galvanized roofing nails. Nails must penetrate at least 1" into framing For mulled and/or DP50 or above units:
More informationINSTALLATION GUIDELINES: X25 SERIES using perimeter installation fin
INSTALLATION GUIDELINES: X25 SERIES using perimeter installation fin Wall systems designed to manage water or that have been upgraded to manage water are important for a trouble free installation. Site
More informationWindows Installed into Walls with Polyiso and Wood Framing. Installation Instructions Picture Frame Method Revised 10/24/2016
Windows Installed into Walls with Polyiso and Wood Framing Installation Instructions Picture Frame Method Revised 10/24/2016 Background There are many acceptable ways to mount and detail windows for support
More informationSAF-T-LINER MVP-EF PARTS MANUAL. Window Section. Page 5-1. Windows 10/96
Windows Page 5-1 Driver's Standard Page 5-2 Windows Driver's Standard Item Part Num. Number Qty. Description Notes 45001506 1 Sash - Driver's, Assembly, with Tempered Glass 7/32" Complete with Trim, No
More information1010 Sliding Mall Front
JUNE, 2018 FEATURES 1 Features Screw spline fabrication 1/4" and 1" glazing Permanodic TM anodized finishes in seven standard choices Painted finishes in forty-two standard choices and unlimited custom
More informationInstructions for the installation of Ellison Bronze balanced door models #137 & 138
1. A packing list will be found in crate No. 1 of each shipment. The parts in the crates should be checked with this list. If there is any discrepancy, notify Ellison Bronze at once. 2. All parts are numbered.
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001) IMPORTANT INFORMATION & GLOSSARY ROUGH OPENINGS
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions
More informationVisions 2000 Single Hung Tilt Window Parts Reference Catalog
Visions 2000 Single Hung Tilt Window Parts Reference Catalog (Includes Parts and Information for Single Hung Tilt Picture and Basement and Miscellaneous Parts for Single Hung Tilt Oriel and Single Hung
More informationVersatrim Side-Snap Frame
Versatrim Side-Snap Frame net door width finished opening width rough opening width (finished opening width plus 1 1/2") Figure 1 Cross section of strike and hinge jambs The rough opening width is equal
More informationIllustration Part Description Base List Weight/ Ft./ Box Number Price/S.L. S.L. S.L. Qty.
Prices DO NOT include glazing gaskets or weathering. See Accessories sheet. Exterior Glazed Back Members for 1" Glass Illustration Part Description Base List Weight/ Ft./ Box Price/S.L. S.L. S.L. Qty.
More informationINSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
More informationLandmark Builders of Montana LANDMARK RESIDENCE LIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION
Landmark Builders of Montana LANDMARK RESIDENCE LIFTSLIDE DOORS INSTALLATION GUIDE & SITE PREPARATION TABLE OF CONTENTS Site Preparation... 3 General Information... 4 Pre-Install Checklist... 5 Jamb to
More information5S3-GP. Steam Swing Door with Double In-Line Panels
53-GP team wing with Double In-Line s Technical ssistance is available Monday - Friday, 8:00 a.m. - 5:00 p.m. (entral Time) 1-877-723-7190 (Toll Free) PRT LIT FRME PGE EY DERIPTION PRT QTY ILL 855 1 JM
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationELEPHANT DOOR SYSTEMS SERIES E1200
INSTALLATION INSTRUCTIONS ELEPHANT DOOR SYSTEMS SERIES E1200 Phone: (800) 262-5151 Fax: (866) 262-3299 crlaurence.com usalum.com crl-arch.com AVDB3096 03.13 TABLE OF CONTENTS SUBJECT PAGE GENERAL INSTALLATION
More informationWOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR. Table of Contents
WOOD AND CLAD COMMERCIAL DOOR WOOD AND CLAD 2 1/4 COMMERCIAL DOOR Table of Contents PAGE History... 2 Part Identification Wood Commercial Door XX RHRA... 3 Part Identification Wood Commercial Door Stationary
More informationSliding Glass Door Assembly and Installation Guide
Sliding Glass Door Assembly and Installation Guide Index Door System Components and Hardware The following components are needed to complete the installation of your Sliding Patio Door unit. Check all
More information3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS
3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. TOOLS NEEDED: Tape Measure
More informationSERIES 4070-T GENERAL ASSEMBLY AND INSTALLATION INSTRUCTIONS
Table of Contents I. Care and Maintenance... 2 II. Tools / Materials, Sealant Requirements, & Anchor Instructions... 2 III. Structure Verification & Sub-Sillpan Installation... 3 1. Opening Verification...3
More informationMaterials. Description Quantity/Size Material Foundation Drainage material. 1.4 cu. yd. Compactible gravel
This 8 12-ft. shed features a simple gable roof, double doors, and side and rear windows for natural lighting. With full-height walls and doors, there's ample room for storing large items or creating a
More informationInstallation Instructions for Vista Air Vertically Folding Walls
Installation Instructions for Vista Air Vertically Folding Walls Use these instructions in conjunction with your shop drawings to see the specifics that are particular to the model you are installing.
More informationInSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled
InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Tools & materials You Will need: Square Hammer or Mallet Level Stiff Putty
More informationPIVOT DOOR 3400P INSTALLATION INSTRUCTIONS
Table of Contents I. Tools, Sealant Requirements, Anchor Recommended Table...1 II. Opening, Frame & Panel Verification...2-3 III. Frame Assembly...4 IV. Frame Installation...5-7 V. Glazing Instructions...8
More informationAssembly Instructions. Important!
Play Action Spiral Tube Slide Assembly Instructions Important! Intended for residential use by children ages 2 to 10, only on properly installed PlayStar playsets. Before use refer to complete safety guidelines
More information(Non Handed Kits) Slotted Hand Screwdriver. Power Driver & Bits. Work Gloves
Patio Door Kit Assembly Instructions -- 2-Panel Patio Door with Non-Assembled Frame and Assembled Sash Panels. (Non Handed Kits) Project Requirements: ~ This door was manufactured for installation into
More informationINSTALLATION INSTRUCTIONS for Wood/Clad Wood Windows without Exterior Trim or Nailing Fin (JII025) ImpOrTaNT INFOrmaTION & GlOssary.
for Wood/Clad Wood Windows without Exterior Trim or Nailing Fin (JII025) Thank you for selecting JELD -WEN products. Attached are JELD-WEN s recommended installation instructions for metal clad wood windows
More informationwestern window systems westernwindowsystems.com installation instructions non-pocket 2-1/4 panels
series 2600 multi-slide non-pocket 2-1/4 panels windowsystems.com windowsystems.com movement, which can cause warping and other problems. Frame kit components: Each door will have a head assembly, a threshold
More informationSuperior by Design. Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL FOLDING SLIDING STACKING PIVOT
Superior by Design. Euro PIVOT Door INSTALLATION GUIDE Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 22410 www.euro-wall.com 888.989.EURO (3876) FOLDING SLIDING
More informationSERIES 3070-T MULTI-SLIDE ASSEMBLY & INSTALLATION INSTRUCTIONS
Table of Contents I. Care and Maintenance...2 II. Tools / Material & Sealant Requirements...2 III. Assembly and Installation...2 IV. Glazing Assembly...3 V. Panel Assembly...3 1. X Panel...3 2. O Panel...4
More informationHOW TO BUILD A 12X8 SHED
HOW TO BUILD A 12X8 SHED With Illustrations, Drawings & Step By Step Details Note: This is a sample plan from RyanShedPlans. All other plans in our collection goes indepth with more details, more instructions,
More informationChapter 9. Windows and Exterior Doors
Chapter 9. Windows and Exterior Doors 9.1 INSTALLING WINDOWS 9.2 INSTALLING EXTERIOR HOUSE DOORS 9.3 INSTALLING SHED DOOR 9.4 INSTALLING EGRESS COMPONENTS Tools needed by volunteers: Hammer Nail apron
More informationKestrel Aluminium Systems Limited. Product Manual Section 22 TB Commercial Door. Manual Version
Kestrel Aluminium Systems Limited Product Manual Section 22 TB Commercial Door Manual Version 23.0.1 PAS24: 2012 Section 22.01 Product Specification 22.01.01 sheet 1 Product specification 22.01.01 sheet
More informationWith Illustrations, Drawings & Step By Step Details. Click Here To Download 12,000 Shed Plans. 1 P a g e H O W B U I L D S H E D.
With Illustrations, Drawings & Step By Step Details Click Here To Download 12,000 Shed Plans 1 P a g e H O W B U I L D S H E D. C O M Table of Contents OVERVIEW... 3 MATERIALS & CUTTING LISTS... 4 DRAWINGS,
More informationPocket Door Kit PD1 / PD2 Installation Instructions. Kit Contents.
Pocket Door Kit PD1 / PD2 Installation Instructions Kit Contents. 1, Create Rough Opening In Stud Wall Construct rough opening ensuring all sides are square and level. Rough opening should be; Height =
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS BUILDERS CHOICE FRAMED Shower Height Swing Door Model: L533 Rev. 09.03.13 MAINTENANCE: Two primary materials are used to manufacture your new Aquatic enclosure; tempered glass
More informationASSEMBLY AND INSTALLATION INSTRUCTIONS for Premium Atlantic Aluminum (6800) Bypass Sliding Patio Doors (JII020) IMPORTANT INFORMATION AND GLOSSARY
for Premium Atlantic Aluminum (6800) Bypass Sliding Patio Doors (JII020) Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Premium Aluminum Sliding
More informationAssembly Instructions. Important!
Play Action Spiral Tube Slide Assembly Instructions Important! Intended for residential use by children ages 2 to 10, only on properly installed PlayStar playsets. Before use refer to complete safety guidelines
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions
More informationSliding Doors S l i d i n g W i n d o w s R o l l e r S h u t t e r s
Sliding Doors S l i d i n g W i n d o w s R o l l e r S h u t t e r s The SALIENT 55 sliding window system The SALIENT 70 sliding window and door system The SALIENT 90 heavy-duty sliding door and window
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationPlease read and understand all instructions before beginning. These instructions cover the non-impact aluminum sliding glass door.
The performance and proper operation of a door is only as good as the installation. By following these instructions, the probability of a good installation greatly increases. Please read and understand
More informationKnock Down Patio Door Assembly Instructions Regular & Impact
Knock Down Patio Door Assembly Instructions Regular & Impact 72 x 80 72 x 82 72 x 96 96 x 80 96 x 82 96 x 96 Impress the Weather KD Patio Door Regular & Impact Sizes 72 x 80 72 x 82 72 x 96 96 x 80 96
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationI n s t a l l a t i o n I n s t r u c t i o n s S E N T I N E L S E R I E S 1 50 SLIDING GLASS DOORS
I n s t a l l a t i o n I n s t r u c t i o n s S E N T I N E L S E R I E S 1 50 SLIDING GLASS DOORS Page 2-9: Installation Instructions, Figures 1, 2, & 3 Page 10-12: Figures A-1, A-2, & A-3: Installation
More informationInstallatIon InstructIons for 2-lIte PatIo Door unassembled
InstallatIon InstructIons for -lite PatIo Door unassembled tools & materials You will need: Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Utility Knife High-Performance Premium Silicone
More informationWEB BASED CORE APPLICATION SPECIFIC INSTALLATION INFORMATION AND METHODS
CORE WEB BASED CORE APPLICATION SPECIFIC INSTALLATION INFORMATION AND METHODS Removing Old Windows Part I - Frame In Although all possible measures have been taken to insure the accuracy of the material
More informationPrivacy Wall Glass Selections - Polished Edge Slider Door
Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin
More informationUNIT 5: EXTERIOR DOORS AND WINDOWS
KEY CONCEPTS 1. Identify tools needed for exterior door and window installation 2. Last step to weather proofing the home 3. Steps to installing exterior doors and windows 4. Maintenance and safety of
More information2820 Series 42" A.F.F. TO CENTER OF PULL HANDLE 34" TO CENTER OF LOCKSET. ENTRANCE-ARCADIA-NONTHERMAL-2820-ALL-SERIES.pdf
Z:\01 UPDATED FILES\01 CAD\02 ENTRANCES\02 S\06 2820 \SERIES\ENTRANCE-ARCADIA-NNTHERMAL-2820-ALL-SERIES.DWG Detail: Vertical Stiles Scale: 6" = 1'-0" SHEET 1 F 8 Z:\01 UPDATED FILES\01 CAD\02 ENTRANCES\02
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationWindows Installed into Walls with Polyiso and Wood Framing. Installation Instructions Standard Method Revised 10/24/2016
Windows Installed into Walls with Polyiso and Wood Framing Installation Instructions Standard Method Revised 10/24/2016 Background There are many acceptable ways to mount and detail windows for support
More informationMagnaline Systems Block Frame Installation Manual
2515 Industry St. Oceanside, CA 92058 Magnaline Systems Block Frame Installation Manual Aluminum top and bottom track with either aluminum or vinyl panels Thank you for choosing Magnaline Systems! Congratulations!
More informationC-Series & S-Series Classic Frame with Transom (Single or Pair)
1. TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Safety Glasses Screw gun #2 Screwdriver tip #3 Screwdriver tip Philips Head screwdriver (Used to move frame on wall using oval slots on
More informationAssembly Instructions BBQ400
Assembly Instructions BBQ400 DOC035 REV C PARTS LIST PART PREVIEW DESCRIPTION QTY PART# ID# 1/4-20 SHOULDER BOLT LONG 4 HDW154 A WASHER 1/2OD X 1/4 ID FLAT ZINC 38 HDW072 B TOP SECTION 1 C 1/4-20 x.625
More informationPhone # La Jolla Doors. Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels
Phone # 800-440-8785 www.lajolladoors.com La Jolla Doors Block Frame Installation Manual Aluminum Frame with either Vinyl or Aluminum Panels Thank you for choosing La Jolla Doors In this manual you will
More informationPicture Window and Welded Dead-Lite (Exterior) Tools: (Not Provided by Manufacturer) Fig Supplies: (Not Provided by Manufacturer) Fig.
Picture Window and Welded Dead-Lite (Exterior) Tools: (Not Provided by Manufacturer) Tape Measure Utility Knife Fig. 0-1 Drill Level Putty Knife Pry bar Square Foam Gun (Optional) Caulk Gun Hammer Safety
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation SL-450TB (2" x 4-1/2" with 1" Glazing) & SL-600TB (2" x 6" with 1" Glazing) IMPORTANT: Read all instructions before beginning installation.
More informationModel 6100 Illustrated Installation Instructions Contractors Wardrobe
Model 6100 Illustrated Installation Instructions Contractors Wardrobe DESIGNERS MANUFACTURERS 26121 Avenue Hall Valencia, CA 91355 (661) 257-17 Fax: (661) 257-4907 Toll Free: (800) CW-DOORS (800) 293-6677
More informationThermally Broken Framing and Door Installation
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More informationSINGLE TRACK BYPASS (patent pending) barn door hardware
SINGLE TRACK BYPASS (patent pending) barn door hardware Installation Manual What is included in your kit: Part number Part name Quantity 1 Inner door hanger 2 2 Outer door hanger 2 3 5/16 x 1.5 lag bolts
More informationIn the 30-plus years that I ve been a remodeling contractor, I ve
New Window in Redundant s and attention to detail keep out air and water By Mike Sloggatt In the 30-plus years that I ve been a remodeling contractor, I ve replaced hundreds of windows. The difficulties
More information170 Sliding Patio Door available Styles
170 Sliding Patio Door available Styles A-171 OXO Continuous Frame Continuous Frame Transom Sidelite A-172 XO OX A-173 XOO OOX A-175 OXXO Manufacturer of Alpine Window Products 170 Sliding Patio Door Component
More informationINOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS
INOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS IMPORTANT: READ THE INSTRUCTIONS AND FAMILIARIZE YOURSELF WITH THE DOOR PARTS AND PIECES BEFORE BEGINNING ASSEMBLY AND INSTALLATION.
More information4-lite Patio Door. Installation Instructions
4-lite Patio Door Installation Instructions IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. Note: Only the 5-0 x 6-8
More information