Mary Gainer NASA Langley Research Center Hampton, VA ESRI Federal User Conference 2005

Size: px
Start display at page:

Download "Mary Gainer NASA Langley Research Center Hampton, VA ESRI Federal User Conference 2005"

Transcription

1 Mapping Drains from Inside-Out Mary Gainer NASA Langley Research Center Hampton, VA ESRI Federal User Conference 2005

2 Agenda Developing orthographic floor plans that map to geographic space Data schema development and implementation across the entire system Web application for emergency response

3 Floor Plans That Map to Geographic Space Data maintained at two levels Plant level Building footprint, land cover Roads, parking, sidewalks Utilities, etc Building level Multi-floor layout Rooms Communications, electrical, drains

4 Floor Plans That Map to Geographic Space Requirements: Must produce paper copy with no discernable difference from legacy floor plans Automatically capture information for reporting Readily link to data maintained by other offices Process no more difficult than in CAD

5 Floor Plans That Map to Geographic Space GIS Layers Room Handicap Drain Plumbing Fire Sprinkler Electrical Communications Window Stairs Wall Door Structural Etc

6 Floor Plans That Map to Geographic Space Grid of all floor plans Single layer for each feature

7 Floor Plans That Map to Geographic Space Maintain plans in drawing space Display plan in geographic space

8 Floor Plans That Map to Geographic Space Additionally - Take features like roof levels and combine into single graphic layer

9 Floor Plans That Map to Geographic Space Custom behaviors implemented Container relationships automatically maintained more efficient editing Transformation transform drawing space features to map data maintained in drawing space only Mapper Transformation Symbolization symbols stored as features point or line referenced multi-part geometry Row Object Feature Container Symbol

10 Floor Plans That Map to Geographic Space Drawing Floor Roof Room Door Drain

11 Floor Plans That Map to Geographic Space Room assigned building and floor level Drain attached to room BLDG: 1200 Floor: First BLDG: 1200 Floor: Second First

12 Floor Plans That Map to Geographic Space Moving feature automatically assigns new level Drain remains attached to the room BLDG: 1200 Floor: First BLDG: 1200 Floor: Second Second

13 Floor Plans That Map to Geographic Space Matching coordinates in drawing and map space Container rules for features Mapper tracks changes in drawing space

14 Data Schema VISIO Document schema Generate schema/code Visualize design changes Configuration managed (CVS)

15 Data Schema This is how we really do it!

16 Data Schema Final Schema Relate to Sanitation Line

17 Data Schema Attribute Table Series of Domains Relationships

18 Data Schema Domain for Drain Type - Plumbing, Lab, Roof, etc Automatically populate using container behavior Relate to end point on exterior sanitation line Identify nearest manhole

19 Application

20 Application Streamlined interface Map function buttons Layer function buttons Help tool

21 Application Web application identifies manhole and provides graphics

22 Acknowledgments Robert Gage Software Engineer Ray Gates Software Engineer Berch Smithson GIS Analyst Scott Allen Student Intern Jim Collins Student Intern Ryan Kozoriz Student Intern

Advanced Computer Aided Design COURSE OUTLINE

Advanced Computer Aided Design COURSE OUTLINE Advanced Computer Aided Design COURSE OUTLINE 1. Course Title: Advanced Computer Aided Design 2. CBEDS Title: Computer Aided Drafting/Design 3. CBEDS Number: 5705 4. Job Titles: Framers Construction Inspectors

More information

Required Documents for Commercial Permits Permit Types 1. New Structure 2. Addition 3. Remodel 4. Tenant Finish 5. Change of Tenant/Use 6.

Required Documents for Commercial Permits Permit Types 1. New Structure 2. Addition 3. Remodel 4. Tenant Finish 5. Change of Tenant/Use 6. Required Documents for Commercial Permits Permit Types 1. New Structure 2. Addition 3. Remodel 4. Tenant Finish 5. Change of Tenant/Use 6. Temporary Use 7. Decks over 30 inches 8. Re-Roof 9. Plumbing 10.

More information

Contents OVERVIEW INTRODUCTION TO CHIEF ARCHITECT GETTING READY TO DRAW QUICK START VACATION CABIN: FLOOR PLAN. How this Book is Put Together

Contents OVERVIEW INTRODUCTION TO CHIEF ARCHITECT GETTING READY TO DRAW QUICK START VACATION CABIN: FLOOR PLAN. How this Book is Put Together Contents OVERVIEW How this Book is Put Together Conventions Icon Key Files on the Website INTRODUCTION TO CHIEF ARCHITECT The Chief Architect Interface Working with the Toolbars Chief Architect s Views

More information

Entry Level Assessment Blueprint Architectural Drafting

Entry Level Assessment Blueprint Architectural Drafting Entry Level Assessment Blueprint Architectural Drafting Test Code: 4004 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Preparing to Draw Identify drafting tools, materials, and

More information

PROGRAMMING SCHEMATIC DESIGN DESIGN DEVELOPMENT CONSTRUCTION DOCUMENTS. room) Scalable bubble diagrams schedules describing programmatic

PROGRAMMING SCHEMATIC DESIGN DESIGN DEVELOPMENT CONSTRUCTION DOCUMENTS. room) Scalable bubble diagrams schedules describing programmatic GENERAL SITE PROGRAMMING SCHEMATIC DESIGN DESIGN DEVELOPMENT CONSTRUCTION DOCUMENTS Scope of work narrative Building code review Description of construction Documentation on drawings as List of applicable

More information

WAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING

WAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING UNIT: Classroom rules and procedures NO. OF DAYS: 2 KEY LEARNING(S): Expectations and classroom procedures UNIT : What are the expectations and classroom procedures in the CAD room 3.4.12.A3. Demonstrate

More information

Unified School District of De Pere Tech. Ed. And Engineering Intro to Construction

Unified School District of De Pere Tech. Ed. And Engineering Intro to Construction Tech. Ed. And Engineering Intro to Construction A. Students will understand that technology is an extension of human capability. B. Students will recognize that systems are made up of individual components

More information

COURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 2 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR

COURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 2 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 2 GRADE LEVEL: 10 12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR

More information

This specification describes the minimum requirements for structural steel drawings.

This specification describes the minimum requirements for structural steel drawings. 1/7 1.0 PURPOSE This specification describes the minimum requirements for structural steel drawings. 2.0 GENERAL As stated in specification SPEC-0800, drawings are intended to be Design drawings. Sufficient

More information

FIELD DATA COLLECTION USING SMART PHONES, TABLETS, AND GPS DEVICES: A CASE STUDY. By Wende Mix & Mary Perrelli SUNY Buffalo State College

FIELD DATA COLLECTION USING SMART PHONES, TABLETS, AND GPS DEVICES: A CASE STUDY. By Wende Mix & Mary Perrelli SUNY Buffalo State College FIELD DATA COLLECTION USING SMART PHONES, TABLETS, AND GPS DEVICES: A CASE STUDY By Wende Mix & Mary Perrelli SUNY Buffalo State College Outline Research Question Methodology Results Summary Research Question

More information

Drawing Standards & Conventions for IDD

Drawing Standards & Conventions for IDD Drawing Standards & Conventions for IDD This document consists of a set of standards that have been developed to maintain a consistency in Interior Decoration and Design students work. The standards are

More information

Deck Tutorial. Decks and Porches. Drawing Decks

Deck Tutorial. Decks and Porches. Drawing Decks Deck Tutorial The Deck Tutorial continues where the Landscaping Tutorial left off, and explains how to create a deck off the back of the house and connect it to the terrain with an exterior staircase.

More information

GEOGRAPHIC MODELLING AND ANALYSIS

GEOGRAPHIC MODELLING AND ANALYSIS GEOGRAPHIC MODELLING AND ANALYSIS I. INTRODUCTION A. Background Geographic Information System is organized within a GIS so as to optimize the convenience and efficiency with they can be used. To distinguish

More information

Deck Tutorial. Decks and Porches. Drawing Decks

Deck Tutorial. Decks and Porches. Drawing Decks Deck Tutorial The Deck Tutorial continues where the Landscaping Tutorial left off, and explains how to create a deck off the back of the house and connect it to the terrain with an exterior staircase.

More information

Deck Tutorial. Chapter 8: Decks and Porches

Deck Tutorial. Chapter 8: Decks and Porches Chapter 8: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase. You may want to

More information

Vectorworks Architect

Vectorworks Architect SAMPLE by Jonathan Pickup third edition written with version 2011 Vectorworks Architect Tutorial Manual Table of Contents Introduction... iii How to Use this Manual... iii New Ways of Drawing... iv Vectorworks

More information

Deck Tutorial. Chapter 6: Decks and Porches

Deck Tutorial. Chapter 6: Decks and Porches Chapter 6: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase. You may want to

More information

Dimension Below are the critical settings in AutoCAD. Other software should follow the same settings.

Dimension Below are the critical settings in AutoCAD. Other software should follow the same settings. 8.1 Drawing Standard 8.1.1 Introduction This drawing standard applies to all building drawings being prepared for the University of Calgary (UCalgary) by external consultants or vendors and internal staff

More information

Prerequisites: ARCH 1230: Building Technology II with a grade of C or higher or ARCH 1240 and ARCH1200 with a grade of C or higher.

Prerequisites: ARCH 1230: Building Technology II with a grade of C or higher or ARCH 1240 and ARCH1200 with a grade of C or higher. New York City College of Technology City University of New York 300 Jay Street, Brooklyn, New York 11201 Department of Architectural Technology ARCH 2330 BUILDING TECHNOLOGY III 1 cl hrs, 6 lab hrs, 4

More information

i-models Kansas City Revit Users Group September, 2013

i-models Kansas City Revit Users Group September, 2013 i-models Kansas City Revit Users Group September, 2013 Agenda i-model Definition Creation of i-models from Revit Reading an i-model Bentley Users collaborating with Revit Users Bentley View free Bentley

More information

Architectural Drafting-Residential (DFTG 1317)

Architectural Drafting-Residential (DFTG 1317) Architectural Drafting-Residential (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Co-requisite: DFTG 1305; DFTG 1310 Course Description Architectural drafting procedures, practices,

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When we are finished, we will have created

More information

Department of Architectural Technology Spring 2018

Department of Architectural Technology Spring 2018 Department of Architectural Technology Spring 2018 ARCH 2431 BUILDING TECHNOLOGY III 1 lecture hours and 6 lab/studio hours, 4 credits Course Description: Course focus is on steel construction. This course

More information

DOCUMENT SUBMITTAL REQUIREMENTS FOR AN ALTERATION OR ADDITION TO AN EXISTING SINGLE-FAMILY DWELLING OR MULTI-FAMILY DWELLING

DOCUMENT SUBMITTAL REQUIREMENTS FOR AN ALTERATION OR ADDITION TO AN EXISTING SINGLE-FAMILY DWELLING OR MULTI-FAMILY DWELLING INFORMATION BULLETIN / PUBLIC - GENERAL INFORMATION REFERENCE NO.: Effective: 10-01-99 DOCUMENT NO. P/GI 2002-008 Revised: 11-01-02 Previously Issued As: IB ST-4 DOCUMENT SUBMITTAL REQUIREMENTS FOR AN

More information

MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS

MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS WHAT S INSIDE INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 1 OVERVIEW 1 SETTING UP LAYERS AND CLASSES 1 CREATING OBJECT

More information

Assignment 1.5 Pre-Design Base Building Model Investment Bank ARCH 5901 Instructor: Glenn Hill Fall 2013

Assignment 1.5 Pre-Design Base Building Model Investment Bank ARCH 5901 Instructor: Glenn Hill Fall 2013 Assignment 1.5 Pre-Design Base Building Model Investment Bank ARCH 5901 Instructor: Glenn Hill Fall 2013 TASK: Develop a 3d digital model of a Pre-Design Base Building for a typical Bank Building using

More information

Landscaping Tutorial. Adding a Driveway Adding Library Objects to Your Plan

Landscaping Tutorial. Adding a Driveway Adding Library Objects to Your Plan Landscaping Tutorial This tutorial describes how to use Home Designer Pro s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features, and how

More information

All drawings submitted to the University should adhere to these guidelines.

All drawings submitted to the University should adhere to these guidelines. CAD Drawing Guidelines 1. Overview This document presents CAD drawing guidelines for using and maintaining the Columbia University facilities base architectural and space CAD floor plans. All drawings

More information

Chief Architect New Feature List

Chief Architect New Feature List SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files

More information

Deck Tutorial. Chapter 8: Decks and Porches

Deck Tutorial. Chapter 8: Decks and Porches Decks and Porches Chapter 8: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase.

More information

Architectural Drafting

Architectural Drafting Measuring What Matters in Job Ready Assessment Blueprint Architectural Drafting Test Code: 4004 / Version: 01 Copyright 2012 General Assessment Information Blueprint Contents General Assessment Information

More information

Residential Construction Checklist Single and Two Family Construction

Residential Construction Checklist Single and Two Family Construction DATE: _ Building Inspection Submittal Requirements Residential Construction Checklist Single and Two Family Construction Submit a City of Big Spring Permit Application, checklist, and 3 complete hard copy

More information

NEW SINGLE FAMILY HOMES

NEW SINGLE FAMILY HOMES NEW SINGLE FAMILY HOMES Your submission must include the following to be accepted as a complete application: 1 copy of the deed and / or purchase and sales agreement if you have owned the property less

More information

BUILDING PLAN REVIEW REQUIREMENTS

BUILDING PLAN REVIEW REQUIREMENTS TOWNSHIP OF NORTH FAYETTE BUILDING DEPARTMENT COMMERCIAL PLAN REVIEW REQUIREMENTS BUILDING PLAN REVIEW REQUIREMENTS In order to perform a thorough Building Plan Review, the following specifications, drawings

More information

DOCUMENT LIST OF DRAWINGS, TABLES AND SCHEDULES

DOCUMENT LIST OF DRAWINGS, TABLES AND SCHEDULES DOCUMENT 00 0115 LIST OF DRAWINGS, TABLES AND SCHEDULES DRAWINGS GENERAL A0.0 COVER SHEET ADDENDUM #2 revised A0.01 TITLE SHEET ADDENDUM #2 revised CIVIL C1.0 TOPO C2.0 DEMOLITION C3.0 TEMPORARY STREET

More information

Residential Design Using AutoCAD 2018

Residential Design Using AutoCAD 2018 Daniel John Stine CSI, CDT Residential Design Using AutoCAD 2018 Includes video instruction SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE UNIQUE CODE INSIDE

More information

SECTION GNSS & GIS MAPPING AND GEODATA

SECTION GNSS & GIS MAPPING AND GEODATA PART 1 - GENERAL 1.1 DESCRIPTION SECTION 11 83 02 A. The contractor shall collect GeoData with Global Navigation Satellite System (GNSS) coordinate locations and elevations for the work to be performed

More information

UNIVERSITY OF ROCHESTER DESIGN STANDARDS FEBRUARY 29, 2012

UNIVERSITY OF ROCHESTER DESIGN STANDARDS FEBRUARY 29, 2012 SECTION 01950 - RECORD DRAWINGS & SPACE FLOOR PLANS 1.1 RECORD DRAWINGS MATERIAL AND FORMAT A. Definition 1. Final record drawings, or as-builts, are drawings, which are revised to reflect the changes

More information

Prerequisites: ARCH 1230 (1231): Building Technology II with a grade of C or higher or ARCH 1240 and ARCH1200 with a grade of C or higher.

Prerequisites: ARCH 1230 (1231): Building Technology II with a grade of C or higher or ARCH 1240 and ARCH1200 with a grade of C or higher. New York City College of Technology City University of New York 300 Jay Street, Brooklyn, New York 11201 Department of Architectural Technology ARCH 2330 (2431) BUILDING TECHNOLOGY III 1 cl hrs, 6 lab

More information

AECOsim Building Designer. Quick Start Guide. Chapter A06 Creating a Master Model Bentley Systems, Incorporated.

AECOsim Building Designer. Quick Start Guide. Chapter A06 Creating a Master Model Bentley Systems, Incorporated. AECOsim Building Designer Quick Start Guide Chapter A06 Creating a Master Model 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Creating a Master Model...3 References... 4

More information

DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY DWELLING

DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY DWELLING INFORMATION BULLETIN / GENERAL INFORMATION REFERENCE NO.: None DOCUMENT NO. P/GI 2014-007 Previously Issued As: P/GI 2011-007 Effective: 01-01-2014 Revised: DOCUMENT SUBMITTAL REQUIREMENTS FOR A NEW MULTI-FAMILY

More information

MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS

MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS TABLE OF CONTENTS INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 2 OVERVIEW 2 SETTING UP LAYERS AND CLASSES 2 CREATING

More information

BRYANT HERITAGE PLAZA 5301 Magasin Avenue Beaumont, AB

BRYANT HERITAGE PLAZA 5301 Magasin Avenue Beaumont, AB BRYANT HERITAGE PLAZA, AB RE-ISSUED FOR BUILDING PERMIT May 9, 206 L I S T O F D R A W I N G S HD ENGINEERING SERVICES LTD. D.B.K. ENGINEERING LTD. D.B.K. ENGINEERING LTD. JUBILEE ENGINEERING CONSULTANTS

More information

AGENDA. Effective Geodatabase Management. Presentation Title. Using Automation. Mohsen Kamal. Name of Speaker Company Name

AGENDA. Effective Geodatabase Management. Presentation Title. Using Automation. Mohsen Kamal. Name of Speaker Company Name AGENDA Effective Geodatabase Management Presentation Title Using Automation Mohsen Kamal Name of Speaker Company Name Agenda Introducing the geodatabase What is a Schema? Schema Creation Options Geoprocessing

More information

COURSE OF STUDY UNIT PLANNING GUIDE ARCHITECTURE G RADE LEVEL: CREDITS CURT BANICKI 1 F ULL YEAR MICHAEL WEBER, ASST. PRINCIPAL JULY 2018

COURSE OF STUDY UNIT PLANNING GUIDE ARCHITECTURE G RADE LEVEL: CREDITS CURT BANICKI 1 F ULL YEAR MICHAEL WEBER, ASST. PRINCIPAL JULY 2018 COURSE OF STUDY UNIT PLANNING GUIDE FOR: ARCHITECTURE G RADE LEVEL: 11 12 5 CREDITS CURT BANICKI 1 F ULL YEAR PREPARED BY: MICHAEL WEBER, ASST. PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR JULY 2018 DUMONT

More information

ConstructDXF DXF Drawing Requirements User Guide <Virtual Environment> 6.0

ConstructDXF DXF Drawing Requirements User Guide <Virtual Environment> 6.0 ConstructDXF DXF Drawing Requirements User Guide 6.0 Page 1 of 8 Contents 1 Introduction... 3 1.1 Purpose of this Guide... 3 1.2 What is ConstructDXF?... 3 2 Preparation of the DXF

More information

ELECTRICAL GENERAL DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL Electrical/Telecommunications Design

ELECTRICAL GENERAL DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL Electrical/Telecommunications Design PART 1: GENERAL 1.01 Electrical/Telecommunications Design A. This section of the design and construction standard outlines general requirements for electrical and telecommunications designs to be performed

More information

03/7/12 Issuance UTD Section Page 1 of 5 Electrical General

03/7/12 Issuance UTD Section Page 1 of 5 Electrical General SECTION 26 01 00 ELECTRICAL GENERAL PART 1: GENERAL 1.1 Electrical/Telecommunications Design 1.1.1 This section of the design and construction standard outlines general requirements for electrical and

More information

2. Electrical rooms shall be centrally located and stacked so that feeder conduits and bus duct are run as straight and short as possible.

2. Electrical rooms shall be centrally located and stacked so that feeder conduits and bus duct are run as straight and short as possible. PART 1: GENERAL 1.01 Electrical/Telecommunications Design A. This section of the design and construction standard outlines general requirements for electrical and telecommunications designs to be performed

More information

A1.1 FOX GARAGE VAN VAN VAN VAN 11/16/ WASHINGTON BLVD ST. LOUIS, MO REVISIONS FLOOR PLAN - LEVEL /01/14

A1.1 FOX GARAGE VAN VAN VAN VAN 11/16/ WASHINGTON BLVD ST. LOUIS, MO REVISIONS FLOOR PLAN - LEVEL /01/14 BUILDING FLOOR PLAN TES: 1. ALL DIMENSIONS ARE TO FACE OF CONCRETE OR CENTERLINE OF COLUMN (U). 2. SEE ENLARGED STAIR PLANS (A2.1-A2.3) FOR DETAILED INFORMATION T SHOWN. 3. SEE FINISH ELEVATIONS (A3.1-A3.2)

More information

Landscaping Tutorial

Landscaping Tutorial Landscaping Tutorial This tutorial describes how to use Home Designer Architectural s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features,

More information

Autodesk Revit MEP Learning Essentials Training Course Outline

Autodesk Revit MEP Learning Essentials Training Course Outline Module 00 Revit in a Nutshell Interactive exercise on creating and documenting a basic building Module 01 Introduction to the Principles of BIM Simple Truths Behind the hype The benefits of BIM What will

More information

Smart 3D Plant/Outfitting Curriculum Path & Training Guidelines

Smart 3D Plant/Outfitting Curriculum Path & Training Guidelines Smart 3D Plant/Outfitting Curriculum Path & Training Guidelines Intergraph PPM recommends that new Smart 3D plant/outfitting users select one of the following training tracks described below. 1. System

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have

More information

COTTAGES AT OVERBROOK THE 'WOODSIDE' 541 LOWNDES HILL ROAD GREENVILLE, SC

COTTAGES AT OVERBROOK THE 'WOODSIDE' 541 LOWNDES HILL ROAD GREENVILLE, SC GREENVILLE, SC TYPE: MUNICIPAL ADDRESS: CUSTOM RESIDENTIAL XXX STREET GREENVILLE SC, 9607 A E J P T : OWNER:, LLC TAX MAP #: PROPERTY AREA: ZONING DISTRICT: BUILDING MATERIAL: BUILDING HEIGHT: FOUNDATION

More information

AutoCAD Architecture 2014

AutoCAD Architecture 2014 CADLearning for AutoCAD Architecture 2014 Course Details 19+ hours of training 325 video tutorials Exercise files included Instructor: Reid Addis Course Description CADLearning for AutoCAD Architecture

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

Revealed: The Secrets of Using AutoCAD Architecture as Profitable BIM Software

Revealed: The Secrets of Using AutoCAD Architecture as Profitable BIM Software Revealed: The Secrets of Using AutoCAD Architecture as Profitable BIM Software Adam M. Ferris Director of Digital Technology Wilson Architects Inc What this Class is and is NOT During this 90 minute presentation

More information

Notre Dame High Addition/Renovation Addendum 3 Page 1

Notre Dame High Addition/Renovation Addendum 3 Page 1 School Notre Dame High Addition/Renovation Addendum 3 Page 1 PROJECT: Notre Dame High School Addition/ Renovation Calgary. Alberta DATE November 15, 2012 ADDENDUM NO. 3 Attachment pages Addendum: Page(s)

More information

Architectural Design

Architectural Design Punch! Pro Dream House Project After completing the tutorial and scale drawing exercises the students will design their dream home using Professional Home Design program, Punch! Home Design. Using Professional

More information

CS2.0 COVER SHEET VOL. 2

CS2.0 COVER SHEET VOL. 2 ARCHITECT GEORGE CROMWELL ELEMENTARY SCHOOL REVITALIZATION 525 Wellham Avenue Glen Burnie, Maryland 21061 OWNER ANNE ARUNDEL COUNTY PUBLIC SCHOOLS 9034 FT. SMALLWOOD ROAD PASADENA, MARYLAND 21122 tel:

More information

701 OCEAN STREET, 4 TH FLOOR, SANTA CRUZ, CA (831) FAX: (831) TDD: (831)

701 OCEAN STREET, 4 TH FLOOR, SANTA CRUZ, CA (831) FAX: (831) TDD: (831) COUNTY OF SANTA CRUZ 701 OCEAN STREET, 4 TH FLOOR, SANTA CRUZ, CA 95060 (831) 454-2580 FAX: (831) 454-2131 TDD: (831) 454-2123 Measuring Your Structure and Drawing Scaled Plans Applications for building

More information

Landscaping Tutorial. Chapter 5:

Landscaping Tutorial. Chapter 5: Chapter 5: Landscaping Tutorial This tutorial was written to help you learn how to use Home Designer Landscape and Deck s Terrain tools. In this tutorial, you will learn how to add elevation information

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

Grade Level Benchmarks and Components

Grade Level Benchmarks and Components Grade Level Benchmarks (GLB) describe the concepts and skills we want students to know and be able to demonstrate in each grade level and each course. Teachers will assess student academic performance

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have

More information

Using the ADMS Mapper

Using the ADMS Mapper Using the ADMS Mapper Mark Attree, CERC ADMS-Urban and ADMS-Roads User Group Meeting 14 th November 2013 Newcastle Contents Introduction Key applications Using the ADMS Mapper Viewing model input Checking

More information

Drawing a Living Room and Family Room Floorplan

Drawing a Living Room and Family Room Floorplan Appendix C Drawing a Living Room and Family Room Floorplan In this chapter, you will learn the following to World Class standards: Draw a Living Room and Family Room Floorplan Draw the Walls and Stairs

More information

Archicad Layout of Drawings

Archicad Layout of Drawings Archicad Layout of Drawings NOTE: It is important that house features (Walls, Cabinets, Floors, etc.) Have been placed on the proper layer and layer combination for ease of transferring your final drawings

More information

Stream Design: From GEOPAK to HEC-Ras

Stream Design: From GEOPAK to HEC-Ras 10 Stream Design: From GEOPAK to HEC-Ras OBJECTIVES Provide you with a general understanding of GEOPAK Cross Section Reports and their capability to generate geometric information for the HecRas program.

More information

SECTION UNDER REVIEW, SUBJECT TO FURTHER NOTICE.

SECTION UNDER REVIEW, SUBJECT TO FURTHER NOTICE. 6 CAD DOCUMENTATION PROTOCOL 6.1 CAD SECTION UNDER REVIEW, SUBJECT TO FURTHER NOTICE. Introduction 6.1.1 General The purpose of this protocol is to set out conditions and requirements in relation to CAD

More information

A0.0 WOODBURY GENERAL INFORMATION SITE PLAN & GENERAL INFORMATION PARKING CALCULATION PROJECT BUILDING AREA CALCULATION

A0.0 WOODBURY GENERAL INFORMATION SITE PLAN & GENERAL INFORMATION PARKING CALCULATION PROJECT BUILDING AREA CALCULATION 07' 04 S t u a r t s t r e e t, S u i t e B 9 5. 8 3. 6 6 3 f a x VICINITY MAP CONTEXT MAP SHEET INDEX PROJECT CALCULATIONS GENERAL INFORMATION PROJECT SITE These drawings are instruments of service and

More information

Making an Architectural Drawing Template

Making an Architectural Drawing Template C h a p t e r 8 Addendum: Architectural Making an Architectural Drawing Template In this chapter, you will learn the following to World Class standards:! Starting from Scratch for the Last time! Creating

More information

Commercial Systems

Commercial Systems Western Technical College 31410360 Commercial Systems Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 Total Hours 36.00 In this course, students

More information

Spring 2017 ARCH 1230 BUILDING TECHNOLOGY II COURSE OUTLINE COURSE COORDINATOR - PROFESSOR JASON MONTGOMERY

Spring 2017 ARCH 1230 BUILDING TECHNOLOGY II COURSE OUTLINE COURSE COORDINATOR - PROFESSOR JASON MONTGOMERY N E W Y O R K C I T Y C O L L E G E O F T E C H N O L O G Y Spring 2017 ARCH 1230 BUILDING TECHNOLOGY II COURSE OUTLINE COURSE COORDINATOR - PROFESSOR JASON MONTGOMERY New York City College of Technology

More information

Architecture of Workplaces 2 1 st semester 2018/2019 COURSE DESCRIPTION. In case of all design phases the name of the task should be marked uniformly:

Architecture of Workplaces 2 1 st semester 2018/2019 COURSE DESCRIPTION. In case of all design phases the name of the task should be marked uniformly: Architecture of Workplaces 2 1 st semester 2018/2019 COURSE DESCRIPTION The aim of the course is to summarize the acquired architectural-technical knowledge, to prepare for the complex architectural thinking

More information

Plant Design work flow Using Autodesk Plant Design Suite Ultimate. Carlos Caminos CAD Manager - Venture Engineering & Construction, Inc.

Plant Design work flow Using Autodesk Plant Design Suite Ultimate. Carlos Caminos CAD Manager - Venture Engineering & Construction, Inc. Plant Design work flow Using Autodesk Plant Design Suite Ultimate Carlos Caminos CAD Manager - Venture Engineering & Construction, Inc. Class Summary In this class, you will learn about a proven oil and

More information

Appendix to Chapter 1 Release 3

Appendix to Chapter 1 Release 3 Appendix to Chapter 1 Release 3 Introduction to AutoCAD Architectural Desktop Release 3 Enhancements to AutoCAD Architectural Desktop Release 3 include changes in the content of the menu bar, toolbars,

More information

PLANNING DEPARTMENT. Measuring Your Vacation Rental and Drawing Scaled Plans

PLANNING DEPARTMENT. Measuring Your Vacation Rental and Drawing Scaled Plans COUNTY OF SANTA CRUZ PLANNING DEPARTMENT 701 OCEAN STREET - 4 TH FLOOR, SANTA CRUZ, CA 95060 (831) 454-2580 FAX: (831) 454-2131 TDD: (831) 454-2123 KATHLEEN MOLLOY PREVISICH, PLANNING DIRECTOR Measuring

More information

From Nothing to Something using AutoCAD Electrical

From Nothing to Something using AutoCAD Electrical From Nothing to Something using AutoCAD Electrical Todd Schmoock Synergis Technologies MA2085-L: You purchased AutoCAD Electrical, or are thinking about purchasing it, but you do not know how to use it.

More information

Virtual Reality Immersion: A Tool for Early Human Factors Intervention

Virtual Reality Immersion: A Tool for Early Human Factors Intervention Virtual Reality Immersion: A Tool for Early Human Factors Intervention Oil & Gas Alert October 26, 2016 Authors - Sunil D. Lakhiani, Ph.D., P.E. and Trey Morrison, Ph.D., P.E., CFEI Widely used virtual

More information

INDEX OF SHEETS FLAMING GORGE RANGER DISTRICT OFFICE ADDITION REGION 4 INTERMOUNTAIN REGION ASHLEY NATIONAL FOREST DRAWING SHEET INDEX

INDEX OF SHEETS FLAMING GORGE RANGER DISTRICT OFFICE ADDITION REGION 4 INTERMOUNTAIN REGION ASHLEY NATIONAL FOREST DRAWING SHEET INDEX INDEX OF SHEETS SHT. DWG. SHEET TITLE GENERAL 1 G1 COVER SHEET, VICINITY MAP, PROJECT DESCRIPTION 43 A402 INTERIOR ELEVATIONS WOMENS 44 A403 INTERIOR ELEVATIONS MENS 45 A404 INTERIOR ELEVATIONS BUILDING-PLUMBING

More information

FACILITIES MANAGEMENT. AutoCAD Guidelines & Standards May 2015

FACILITIES MANAGEMENT. AutoCAD Guidelines & Standards May 2015 FACILITIES MANAGEMENT AutoCAD Guidelines & Standards May 2015 PLEASE NOTE: Changes in the 2015 guidelines appear in these sections; 1.1, 3.2, and 5.2. SECTION 1: General Guideline Table of Contents 1.1

More information

4. Special Systems Design: including Fire Alarm and Security. C. Electrical and Telecommunications Ductbanks: Refer to Section 16118

4. Special Systems Design: including Fire Alarm and Security. C. Electrical and Telecommunications Ductbanks: Refer to Section 16118 PART 1: GENERAL This section of the design standard outlines general requirements for electrical and telecommunications designs to be performed for the University of Texas at Austin. This standard is intended

More information

ARCHITECTURE CADD Course Syllabus

ARCHITECTURE CADD Course Syllabus 6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 ARCHITECTURE CADD Course Syllabus Course Number: TTC-0880 OHLAP Credit: Yes OCAS Code: 8903 Course Length: 120 Hours Career Cluster: Manufacturing

More information

Carpentry/Carpenter CIP Task Grid

Carpentry/Carpenter CIP Task Grid 1 Secondary Task List 100 SAFETY/OCCUPATIONAL ORIENTATION 101 Identify and follow all basic safety practices and procedures. 102 Identify and follow all lab safety practices and procedures. 103 Identify

More information

Industrial Technology Curriculum

Industrial Technology Curriculum Industrial Technology Curriculum Written 2009-2010 Mission Statement: Industrial Technology The Mission of the Oskaloosa Community School Industrial Technology Department is to provide opportunities to

More information

Basic Engineering Shapes

Basic Engineering Shapes C h a p t e r 3 Basic Engineering Shapes In this chapter, you will learn the following to World Class standards:! What are Basic Engineering Shapes! Why use Basic Engineering Shapes! Selecting a Basic

More information

ARCGIS DESKTOP DEMO (GEOCODING, SERVICE AREAS, TABULAR & SPATIAL JOINS)

ARCGIS DESKTOP DEMO (GEOCODING, SERVICE AREAS, TABULAR & SPATIAL JOINS) ARCGIS DESKTOP DEMO (GEOCODING, SERVICE AREAS, TABULAR & SPATIAL JOINS) Indiana State GIS Day Conference: September 22, 2015 ASHLEY SUITER GIS Data Analyst Epidemiology Resource Center Indiana State Department

More information

Archicad Layout of Drawings

Archicad Layout of Drawings Archicad Layout of Drawings NOTE: It is important that house features (Walls, Cabinets, Floors, etc.) Have been placed on the proper layer and layer combination for ease of transferring your final drawings

More information

Safety (OSHA 10 hour)

Safety (OSHA 10 hour) Construction Technology Core and Sustainable Construction Subject Code: 178000 Students will learn principles in basic safety (10-hr OSHA), construction math, hand and power tool are and operation, blueprint

More information

BUILDING STANDARDS BUILDING AND DEVELOPMENT PERMIT APPLICATION DRAWING REQUIREMENTS

BUILDING STANDARDS BUILDING AND DEVELOPMENT PERMIT APPLICATION DRAWING REQUIREMENTS Building and Development Permit Applications Definitions: Type A Residential Projects: All projects related to one and two unit dwellings Type B Residential Projects: All projects related to Apartments,

More information

LESSON 1: UNDERSTANDING CONSTRUCTION DRAWINGS

LESSON 1: UNDERSTANDING CONSTRUCTION DRAWINGS LESSON 1: UNDERSTANDING CONSTRUCTION DRAWINGS INTRODUCTION In this lesson, you ll learn about the different types of drawings used in the construction industry, and how to read floor plans, section drawings,

More information

ADMINISTRATION DEPARTMENT Plant Management Division. An Inventory of Its State Office Building Drawings

ADMINISTRATION DEPARTMENT Plant Management Division. An Inventory of Its State Office Building Drawings MINNESOTA HISTORICAL SOCIETY Minnesota State Archives ADMINISTRATION DEPARTMENT Plant Management Division An Inventory of Its State Office Building Drawings OVERVIEW OF THE RECORDS Agency: Minnesota. Dept.

More information

Summary of Modifications/Changes in this Update

Summary of Modifications/Changes in this Update Summary of Modifications/Changes in this Update This Summary of Changes is for information only. It is not a part of the referenced document, and should not be used for project documentation. U.S. Department

More information

UTSA Facilities Condition Assessment. Out Brief August XX, 2009

UTSA Facilities Condition Assessment. Out Brief August XX, 2009 UTSA Facilities Condition Assessment Out Brief August XX, 2009 Agenda Opening Remarks FCA Results Summary by Category Example Deficiencies FCA Results Summary by Building Proposed Project List Potential

More information

Architectural Drafting (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab)

Architectural Drafting (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Architectural Drafting (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Prerequisite/Co-requisite: 1. 1310 Microstation (required) 2. Knowledge of basic computer operations and

More information

AS10690 Revit Master Class Building Construction Ready Curtain Walls

AS10690 Revit Master Class Building Construction Ready Curtain Walls AS10690 Revit Master Class Building Construction Ready Curtain Walls Matt Stachoni BIM Specialist, Microsol Resources Twitter: @MattStachoni Join the conversation #AU2015 Class summary Curtain walls represent

More information

2013 Academic Challenge

2013 Academic Challenge 2013 Academic Challenge ENGINEERING GRAPHICS TEST STATE FINALS This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Jacob

More information

Expected Skills to be demonstrated: PA Standards/Anchors: Eligible Content: Instructional Strategies: Assessments:

Expected Skills to be demonstrated: PA Standards/Anchors: Eligible Content: Instructional Strategies: Assessments: Course Title: Architecture Topic/Concept: Vocabulary Assignments Time Allotment: 36 Days Of Homework, 5 15 Unit Sequence: 1 1. Architectural styles 2. The physical parts of a structure 3. Design process

More information