The author has asserted their right to be identified as the author of this work in accordance with the Copyright, Design and Patents Act 1988.
|
|
- Franklin Cameron
- 5 years ago
- Views:
Transcription
1 Macmillan Education 4 Crinan Street, London, N1 9XW A division of Macmillan Publishers Limited Companies and representatives throughout the world ISBN AER Caribbean Examinations Council (CXC ) The author has asserted their right to be identified as the author of this work in accordance with the Copyright, Design and Patents Act First published 2014 This revised version published 2015 Permission to copy The material in this book is copyright. However, the publisher grants permission for copies to be made without fee. Individuals may make copies for their own use or for use by classes of which they are in charge; institutions may make copies for use within and by the staff and students of that institution. For copying in any other circumstances, prior permission in writing must be obtained from Macmillan Publishers Limited. Under no circumstances may the material in this book be used, in part or in its entirety, for commercial gain. It must not be sold in any format. Designed by Macmillan Publishers Limited Cover design by Macmillan Publishers Limited and Red Giraffe
2 CAPE Building and Mechanical Engineering Drawing Free Resources (formerly CAPE Geometrical and Mechanical Engineering) LIST OF CONTENTS CAPE Building and Mechanical Engineering Drawing Syllabus Extract 4 CAPE Building and Mechanical Engineering Drawing Syllabus 5 CAPE BMED Specimen Papers: Unit 1, Paper 01 Option A (Engineering Drawing) Specimen Paper 80 Unit 1, Paper 01 Option B (Building Drawing) Specimen Paper 89 Unit 1, Paper 02 (Building and Mechanical Engineering Drawing) Specimen Paper 97 Unit 2, Paper 01 Option A (Mechanical Engineering Drawing and Design) Specimen Paper 107 Unit 2, Paper 01 Option B (Building Drawing and Design) Specimen Paper 121 Unit 2, Paper 02 Option A (Mechanical Engineering Drawing and Design) Specimen Paper 131 Unit 2, Paper 02 Option B (Building Drawing and Design) Specimen Paper 139 CAPE BMED Mark Schemes Unit 1, Paper 01 Option A (Engineering Drawing) Mark Scheme 146 Unit 1, Paper 01 Option B (Building Drawing) Mark Scheme 147 Unit 1, Paper 02 (Building and Mechanical Engineering Drawing) Mark Scheme 148 Unit 2, Paper 01 Option A (Mechanical Engineering Drawing and Design) Mark Scheme 163 Unit 2, Paper 01 Option B (Building Drawing and Design) Mark Scheme 164 Unit 2, Paper 02 Option A (Mechanical Engineering Drawing and Design) Mark Scheme 165 Unit 2, Paper 02 Option B (Building Drawing and Design) Mark Scheme 178 CAPE Building and Mechanical Engineering Drawing Subject Reports: May/June May/June May/June May/June May/June 2008 Trinidad and Tobago 246 May/June 2008 Rest of Caribbean 257 May/June May/June May/June May/June May/June May/June
3 Building and Mechanical Engineering Drawing Building and Mechanical Engineering Drawing (BMED) provides a significant contribution to the development of the human resources required for the creation of advanced designing and creative solutions to the twenty-first century demands of industrial production and manufacturing in the Caribbean. The course of study for BMED incorporates aspects of architectural drawings of buildings as well as mechanical drawings for the development and communication of design ideas and concepts. As a form of graphical communication, the course provides the student with the opportunity of visualising and comprehending information presented verbally, graphically and mathematically. A student who completes this syllabus would be experienced in the use of the latest developments of Computer Aided Drawing (CAD). In addition, the student would become dexterous in the application of the British Standard (BS8888), ISO Standards, Caribbean Uniform Building Codes (CUBiC) and other local codes to building and engineering drawings. By pursuing this course, students will develop twenty-first century skills such as creativity, decision-making, problemsolving, critical thinking and collaboration. This syllabus is designed to provide in depth knowledge, skills and competencies that are required for further studies and for the world of work. The Building and Mechanical Engineering Drawing Syllabus consists of two Units of 150 hours, each comprising three Modules of 50 hours each. Each Module is compulsory. Unit 1: Building and Mechanical Engineering Drawing Module 1 - Geometry 1 Module 2 - Geometry 2 Options Module 3A - Engineering Drawing OR Module 3B - Building Drawing Unit 2: Building and Engineering Design Option A: Mechanical Engineering Drawing and Design Module 1 - Mechanics of Machines Module 2 - Engineering Materials and Processes Module 3 - Management and Design Option B: Building Drawing and Design Module 1 - Structural Drawings Module 2 - Building Materials and Processes Module 3 - Building Design Elements
4 LAB Effective for examinations from May-June CARIBBEAN EXAMINATIONS COUNCIL Car ibbean Advanced Pr of iciency Exam inat ion CAPE BUILDING AND MECHANICAL ENGINEERING DRAWING SYLLABUS Effective for examinations from May June 2016 CXC A22/U2/15
5 Published in Jamaica by the Caribbean Examinations Council All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means electronic, photocopying, recording or otherwise without prior permission of the author or publisher. Correspondence related to the syllabus should be addressed to: The Pro-Registrar Caribbean Examinations Council Caenwood Centre 37 Arnold Road, Kingston 5, Jamaica Telephone Number: +1 (876) Facsimile Number: +1 (876) Address: cxcwzo@cxc.org Website: Copyright 2015 by Caribbean Examinations Council Prince Road, Pine Plantation Road, St Michael BB11091 CXC 22/U2/15
6 Contents INTRODUCTION... i RATIONALE... 1 AIMS... 2 SKILLS AND ABILITIES TO BE ASSESSED... 3 PREREQUISITES OF THE SYLLABUS... 3 STRUCTURE OF THE SYLLABUS... 3 UNIT 1: BUILDING AND MECHANICAL ENGINEERING DRAWING MODULE 1: GEOMETRY MODULE 2: GEOMETRY MODULE 3A: ENGINEERING DRAWING MODULE 3B: BUILDING DRAWING UNIT 2: BUILDING AND ENGINEERING DESIGN OPTION A: MECHANICAL ENGINEERING DRAWING AND DESIGN MODULE 1: MECHANICS OF MACHINES MODULE 2: ENGINEERING MATERIALS AND PROCESSES..26 MODULE 3: ENGINEERING DESIGN ELEMENTS.30 OPTION B: BUILDING DRAWING AND DESIGN MODULE 1: STRUCTURAL DRAWINGS MODULE 2: BUILDING MATERIALS AND PROCESSES...38 MODULE 3: MANAGEMENT AND DESIGN OUTLINE OF ASSESSMENT 48 CXC 22/U2/15
CSEC. Tecnica. Drawing SYLLABUS SPECIMEN PAPER MARK SCHEME SUBJECT REPORTS
hnicald aldrawi Tecnica chnicald caldraw CSEC Technical Drawing SYLLABUS SPECIMEN PAPER MARK SCHEME SUBJECT REPORTS Macmillan Education 4 Crinan Street, London, N1 9XW A division of Macmillan Publishers
More informationCSEC Visual Arts SYLLABUS SUBJECT REPORTS
alartsv VisualA ualartsv VisualA alartsv CSEC Visual Arts SYLLABUS SUBJECT REPORTS Macmillan Education 4 Crinan Street, London, N1 9XW A division of Macmillan Publishers Limited Companies and representatives
More informationSYLLABUS SPECIMEN PAPER MARK SCHEME & KEY
mation& edesig imation medesi imation CAPE Animation & Game Design SYLLABUS SPECIMEN PAPER MARK SCHEME & KEY Macmillan Education 4 Crinan Street, London, N1 9XW A division of Macmillan Publishers Limited
More informationComputer Aided Drafting and Design
Computer Aided Drafting and Design Degrees: AAS Computer Aided Drafting and Design 60-63 Diploma: Computer Aided Drafting and Design 48-51 Certificates: Computer Assisted Drafter 30-36 Detailer 25-28 Drafter
More informationCredit Value 7 QCF Level 2 GLH 50. Learner pack
QETI/034 Understanding Computer aided drawing (CAD) Credit Value 7 QCF Level 2 GLH 50 Unit purpose/aims Learner pack This unit will enable you to acquire the knowledge and practical skills required to
More informationIET Standards Committee. Governance. IET Standards Committee Remit. IET Standards Committee Constitution
IET Standards Committee Governance The IET is governed by a Board of Trustees, to which report five committees and Council. In addition, two main boards Knowledge Management Board and Membership and Professional
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 128-30 First edition 2001-04-01 Technical drawings General principles of presentation Part 30: Basic conventions for views Dessins techniques Principes généraux de représentation
More informationISO INTERNATIONAL STANDARD. Photography Root mean square granularity of photographic films Method of measurement
INTERNATIONAL STANDARD ISO 10505 First edition 2009-05-15 Photography Root mean square granularity of photographic films Method of measurement Photographie Moyenne quadratique granulaire de films photographiques
More informationISO INTERNATIONAL STANDARD. Metallic materials Knoop hardness test Part 3: Calibration of reference blocks
INTERNATIONAL STANDARD ISO 4545-3 First edition 2005-11-15 Metallic materials Knoop hardness test Part 3: Calibration of reference blocks Matériaux métalliques Essai de dureté Knoop Partie 3: Étalonnage
More informationStandardized GRADE 3. Test Tutor MATH. Michael Priestley. Standardized Test Tutor: Math, Grade 3 Michael Priestley, Scholastic Teaching Resources
Standardized GRADE 3 MATH Michael Priestley Scholastic Inc. grants teachers permission to photocopy the designated reproducible pages from this book for classroom use. No other part of this publication
More informationISO 5-4 INTERNATIONAL STANDARD. Photography and graphic technology Density measurements Part 4: Geometric conditions for reflection density
INTERNATIONAL STANDARD ISO 5-4 Third edition 2009-12-01 Photography and graphic technology Density measurements Part 4: Geometric conditions for reflection density Photographie et technologie graphique
More informationISO INTERNATIONAL STANDARD. Technical product documentation Lettering Part 6: Cyrillic alphabet
INTERNATIONAL STANDARD ISO 3098-6 First edition 2000-05-01 Technical product documentation Lettering Part 6: Cyrillic alphabet Documentation technique de produits Écriture Partie 6: Alphabet cyrillique
More informationISO INTERNATIONAL STANDARD. Technical product documentation Digital product definition data practices
INTERNATIONAL STANDARD ISO 16792 First edition 2006-12-15 Technical product documentation Digital product definition data practices Documentation technique de produits Données de définition d'un produit
More informationISO INTERNATIONAL STANDARD. Technical product documentation Lettering Part 3: Greek alphabet
INTERNATIONAL STANDARD ISO 3098-3 Second edition 2000-05-01 Technical product documentation Lettering Part 3: Greek alphabet Documentation technique de produits Écriture Partie 3: Alphabet grec Reference
More informationLearning Resources, Inc., Vernon Hills, IL (U.S.A.) Learning Resources Ltd., King s Lynn, Norfolk (U.K.)
, Vernon Hills, IL (U.S.A.) Learning Resources Ltd., King s Lynn, Norfolk (U.K.) All rights reserved. This book is copyrighted. No part of this book may be reproduced, stored in a retrieval system, or
More informationSteel wire for general fencing purposes
BRITISH STANDARD BS 4102:1998 ICS 77.140.65 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Specification for Steel wire for general fencing purposes Committees responsible for this
More informationPlain bearings Wrapped bushes
BRITISH STANDARD BS ISO 3547-3:2006 Plain bearings Wrapped bushes Part 3: Lubrication holes, grooves and indentations ICS 21.100.10 National foreword This British Standard was published under the authority
More informationISO INTERNATIONAL STANDARD. Geometrical product specifications (GPS) Straightness Part 2: Specification operators
INTERNATIONAL STANDARD ISO 12780-2 First edition 2011-04-01 Geometrical product specifications (GPS) Straightness Part 2: Specification operators Spécification géométrique des produits (GPS) Rectitude
More informationISO 5-2 INTERNATIONAL STANDARD. Photography and graphic technology Density measurements Part 2: Geometric conditions for transmittance density
INTERNATIONAL STANDARD ISO 5-2 Fifth edition 2009-12-01 Photography and graphic technology Density measurements Part 2: Geometric conditions for transmittance density Photographie et technologie graphique
More informationDesign and Communication Graphics
Design and Communication Graphics Scheme of Work 2014-2015 Ballyhaunis Community School Mission statement The DCG department aspires to provide a safe, stimulating environment where all students can develop
More informationAustralian/New Zealand Standard
AS/NZS 1102.111:1997 IEC 617-11:1996 Australian/New Zealand Standard Graphical symbols for electrotechnical documentation Part 111: Architectural and topographical installation plans and diagrams [ IEC
More informationCAD Mechanical Design I
EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62539 First edition 2007-07 IEEE 930 Guide for the statistical analysis of electrical insulation breakdown data Commission Electrotechnique Internationale International Electrotechnical
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 61400-14 First edition 2005-03 Wind turbines Part 14: Declaration of apparent sound power level and tonality values IEC 2005 Copyright - all rights reserved No part of this
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 294-4 Second edition 2001-12-15 Plastics Injection moulding of test specimens of thermoplastic materials Part 4: Determination of moulding shrinkage Plastiques Moulage par injection
More informationINTERNATIONAL. Medical device software Software life cycle processes
INTERNATIONAL STANDARD IEC 62304 First edition 2006-05 Medical device software Software life cycle processes This English-language version is derived from the original bilingual publication by leaving
More informationDesign & Site Measure Services. Complete certified glass solutions designed for your application
Design & Site Measure Services Complete certified glass solutions designed for your application Complete Turnkey Design & Specialist Glass Manufacturing Services When it comes to glass, Glasshape understand
More information11+ A STEP BY STEP GUIDE HOW TO DO NON-VERBAL REASONING 11+ CEM STEP BY STEP NON-VERBAL REASONING 12+
11+ HOW TO DO NON-VERBAL REASONING A STEP BY STEP GUIDE STEP BY STEP NON-VERBAL REASONING SELECTION TESTS GRAMMAR SCHOOL SELECTION STEP BY STEP NON-VERBAL REASONING 12+ 11+ PRIVATE SCHOOLS CEM Step by
More informationISO Graphical symbols Safety colours and safety signs Part 3: Design principles for graphical symbols for use in safety signs
INTERNATIONAL STANDARD ISO 3864-3 Second edition 2012-02-01 Graphical symbols Safety colours and safety signs Part 3: Design principles for graphical symbols for use in safety signs Symboles graphiques
More informationISO INTERNATIONAL STANDARD. Technical drawings General principles of presentation Part 44: Sections on mechanical engineering drawings
INTERNATIONAL STANDARD ISO 128-44 First edition 2001-04-15 Technical drawings General principles of presentation Part 44: Sections on mechanical engineering drawings Dessins techniques Principes généraux
More informationISO INTERNATIONAL STANDARD. Geometrical product specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness
INTERNATIONAL STANDARD ISO 12181-1 First edition 2011-04-01 Geometrical product specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness Spécification géométrique des produits (GPS)
More informationISO INTERNATIONAL STANDARD. Technical drawings General principles of presentation Part 23: Lines on construction drawings
INTERNATIONAL STANDARD ISO 128-23 First edition 1999-06-15 Technical drawings General principles of presentation Part 23: Lines on construction drawings Dessins techniques Principes généraux de représentation
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60748-4-3 First edition 2006-08 Semiconductor devices Integrated circuits Part 4-3: Interface integrated circuits Dynamic criteria for analogue-digital converters (ADC) IEC 2006
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61097-15 Edition 1.0 2012-05 Global maritime distress and safety system (GMDSS) Part 15: Inmarsat FB500 ship earth station Operational and performance requirements, methods of
More informationISO/TR TECHNICAL REPORT. Textiles Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests
TECHNICAL REPORT ISO/TR 12116 First edition 2008-07-15 Textiles Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests Textiles Méthodes de laboratoire pour
More informationISO/TR TECHNICAL REPORT. Textiles Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests
TECHNICAL REPORT ISO/TR 12116 First edition 2008-07-15 Textiles Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests Textiles Méthodes de laboratoire pour
More informationISO/TR TECHNICAL REPORT. Gears Calculation of load capacity of wormgears. Engrenages Calcul de la capacité de charge des engrenages à vis
TECHNICAL REPORT ISO/TR 14521 First edition 2010-11-15 Gears Calculation of load capacity of wormgears Engrenages Calcul de la capacité de charge des engrenages à vis Reference number ISO/TR 14521:2010(E)
More informationISO INTERNATIONAL STANDARD. Textile floor coverings Laboratory cleaning procedure using spray extraction
INTERNATIONAL STANDARD ISO 11379 Second edition 2009-02-01 Textile floor coverings Laboratory cleaning procedure using spray extraction Revêtements de sol textiles Méthode de nettoyage en laboratoire par
More informationISO INTERNATIONAL STANDARD. Geometrical product specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form
INTERNATIONAL STANDARD ISO 12180-1 First edition 2011-04-01 Geometrical product specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form Spécification géométrique des produits
More informationISO 3040 INTERNATIONAL STANDARD. Geometrical product specifications (GPS) Dimensioning and tolerancing Cones
INTERNATIONAL STANDARD ISO 3040 Third edition 2009-12-01 Geometrical product specifications (GPS) Dimensioning and tolerancing Cones Spécification géométrique des produits (GPS) Cotation et tolérancement
More informationISO INTERNATIONAL STANDARD. Technical drawings General principles of presentation Part 34: Views on mechanical engineering drawings
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 128-34 First edition 2001-01-15 Technical drawings General principles of presentation Part 34: Views on mechanical engineering drawings Dessins
More informationISO 5-2 INTERNATIONAL STANDARD. Photography and graphic technology Density measurements Part 2: Geometric conditions for transmittance density
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 5-2 Fifth edition 2009-12-01 Photography and graphic technology Density measurements Part 2: Geometric conditions for transmittance density Photographie
More informationPlain bearings Wrapped bushes
BRITISH STANDARD BS ISO 3547-5:2007 Licensed Copy: :FULLNAME, : DATE, Uncontrolled Copy, (c) BSI Plain bearings Wrapped bushes Part 5: Checking the outside diameter ICS 21.100.10 National foreword Licensed
More informationISO/TS TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ISO/TS 22028-2 First edition 2006-08-15 Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 2: Reference output
More informationAustralian Standard. Paper sizes AS [Based on and including the full text of ISO 216:1975 and ISO 217:1995]
AS 1612 1999 Australian Standard Paper sizes [Based on and including the full text of ISO 216:1975 and ISO 217:1995] This Australian Standard was prepared by Committee IT/8, Paper Stationery. It was approved
More informationC A R I B B E A N E X A M I N A T I O N S C O U N C I L REPORT ON CANDIDATES WORK IN THE SECONDARY EDUCATION CERTIFICATE EXAMINATION MAY/JUNE 2010
C A R I B B E A N E X A M I N A T I O N S C O U N C I L REPORT ON CANDIDATES WORK IN THE SECONDARY EDUCATION CERTIFICATE EXAMINATION MAY/JUNE 2010 TECHNICAL DRAWING GENERAL PROFICIENCY Copyright 2010 Caribbean
More informationSyllabus Course description
Syllabus Course description Course title Descriptive geometry Course code 97001 97099 Scientific sector Degree MAT/03 formazione scientifica Bachelor in Design and Art (L-4) Semester Winter semester 2018/19
More informationInsulation co-ordination Part 1: Definitions, principales and rules. IEC 2006 Copyright - all rights reserved
INTERNATIONAL STANDARD IEC 60071-1 Eight edition 2006-01 Insulation co-ordination Part 1: Definitions, principales and rules IEC 2006 Copyright - all rights reserved No part of this publication may be
More informationHot rolled square steel bars for general purposes Dimensions and tolerances on shape and dimensions
BRITISH STANDARD BS EN 10059:2003 Hot rolled square steel bars for general purposes Dimensions and tolerances on shape and dimensions The European Standard EN 10059:2003 has the status of a British Standard
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60444-8 First edition 2003-07 Measurement of quartz crystal unit parameters Part 8: Test fixture for surface mounted quartz crystal units Mesure des paramètres des résonateurs
More informationDrafting and Design 1A
Syllabus Drafting and Design 1A Overview This one-semester course is intended as a practical, hands-on guide to help you understand the various techniques, standards, and tools used in drafting and design.
More informationISO 534 INTERNATIONAL STANDARD. Paper and board Determination of thickness, density and specific volume
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 534 Third edition 2005-02-01 Paper and board Determination of thickness, density and specific volume Papier et carton Détermination de l'épaisseur,
More informationReference number of working document: ISO/IEC JTC 1/SC 24 N 000
Reference number of working document: ISO/IEC JTC 1/SC 24 N 000 Date: 2014-08-00 Reference number of document: Committee identification: ISO/IEC JTC 1/SC 24/WG 6 Secretariat: Information technology Computer
More informationCOURSE SYLLABUS. COURSE NUMBER AND TITLE: PHTC 1311 Fundamentals of Photography
COURSE SYLLABUS COURSE NUMBER AND TITLE: PHTC 1311 Fundamentals of Photography COURSE (CATALOG) DESCRIPTION: This course is an introduction to camera operation, image production, composition, supplemental
More informationMECH 192 COMPUTER AIDED DESIGN
MECH 192 COMPUTER AIDED DESIGN Asst. Prof. Dr. Onur SARAY Department of Mechanical Engineering Office: T-109 onur.saray@btu.edu.tr 224 314 18 11 1. INTRODUCTION What is an Engineering Drawing? Engineering
More informationROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE
ROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE Center for Imaging Science NEW COURSE (COS- IMGS-789): Special Topics: Optical Component, System Design and Performance Evaluation
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 18944 Second edition 2014-06-01 Imaging materials Reflection colour photographic prints Test print construction and measurement Matériaux pour l image Réflexion des impressions
More informationPELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305 Class Hours: 3 Credit Hours: 4 Laboratory Hours: 3 Date Revised: Spring 2011 NOTE: This course is designed
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11699-1 Second edition 2008-09-15 Non-destructive testing Industrial radiographic film Part 1: Classification of film systems for industrial radiography Essais non destructifs
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION IEC TS 61400-14 First edition 2005-03 Wind turbines Part 14: Declaration of apparent sound power level and tonality values Reference number IEC/TS 61400-14:2005(E) Publication numbering
More informationEngineering Drawing. Engineering Drawing TVET FIRST NATED SERIES. Engineering Drawing. Student s Book. NATED Series. M Cameron TVET FIRST NATED SERIES
The TVET First NATED Series offers students and lecturers a wide range of courses, written by lecturers, examiners and subject experts. Troupant/Macmillan have developed brand new books that cover the
More informationArea of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES Engineering Grade 11 BIG IDEAS
Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES Engineering Grade 11 BIG IDEAS Design for the life cycle includes consideration of social and environmental impacts. Personal design interests
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61924 First edition 2006-05 Maritime navigation and radiocommunication equipment and systems Integrated navigation systems Operational and performance requirements, methods of
More informationISO INTERNATIONAL STANDARD. Rubber Tolerances for products Part 2: Geometrical tolerances
INTERNATIONAL STANDARD ISO 3302-2 Second edition 2008-10-01 Rubber Tolerances for products Part 2: Geometrical tolerances Caoutchouc Tolérances pour produits Partie 2: Tolérances géométriques Reference
More informationPart 1: General requirements
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3098-1 Second edition 2015-03-01 Technical product documentation Lettering Part 1: General requirements Documentation technique de produits Écriture
More informationPROSPECTUS 2018/19 correspondence courses
PROFESSIONAL DRAFTING SERVICES TRAINING DEPARTMENT PROSPECTUS 2018/19 correspondence courses A great deal of care and time has been taken to ensure, to the best of our knowledge, that all information contained
More informationPROGRAM OUTLINE BASIC DRAFTING TECHNOLOGY
BASIC DRAFTING TECHNOLOGY The mission of the Basic Drafting Technology Program at Crowley's Ridge Technical Institute is to provide the training necessary for students to be competitive in the workforce
More informationGEOSPATIAL ENGINEERING COMPETENCIES. Engineering Surveying
ICES Geospatial Engineering - Engineering Surveying Competencies Revised December 2016 GEOSPATIAL ENGINEERING COMPETENCIES Engineering Surveying The measurement, definition and portrayal, either digitally
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60076-5 Third edition 2006-02 Power transformers Part 5: Ability to withstand short circuit IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61097-2 Second edition 2002-09 Global maritime distress and safety system (GMDSS) Part 2: COSPAS-SARSAT EPIRB Satellite emergency position indicating radio beacon operating on
More informationISO 897 INTERNATIONAL STANDARD. Photography Roll films, 126, 110 and 135-size films Identification of the image-bearing side
INTERNATIONAL STANDARD ISO 897 Third edition 2000-10-15 Photography Roll films, 126, 110 and 135-size films Identification of the image-bearing side Photographie Films en bobines et films en formats 126,
More informationTEC634 Architectural CAD I (formerly Architectural Drawing I) A Course Outline for Architectural CAD I
Parsippany-Troy Hills School District TEC634 Architectural CAD I (formerly Architectural Drawing I) A Course Outline for Architectural CAD I Developed: June 2004 Revised: October 2012 June 2016 Approved
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8062-3 First edition 2007-06-01 Geometrical product specifications (GPS) Dimensional and geometrical tolerances for moulded parts Part 3: General dimensional and geometrical
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-2-58 Third edition 2004-07 Environmental testing Part 2-58: Tests Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat
More informationISO INTERNATIONAL STANDARD. Tool holders with cylindrical shank Part 1: Cylindrical shank, location bore Technical delivery conditions
INTERNATIONAL STANDARD ISO 10889-1 Second edition 2004-11-15 Tool holders with cylindrical shank Part 1: Cylindrical shank, location bore Technical delivery conditions Porte-outil à queue cylindrique Partie
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13656 First edition 2000-02-01 Graphic technology Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs Technologie graphique
More informationCutting tool data representation and exchange. Part 72:
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 13399-72 First edition 2016-07-15 Cutting tool data representation and exchange Part 72: Creation of documents for the standardized data exchange
More informationGeometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing
INTERNATIONAL STANDARD ISO 1660 Third edition 2017-02 Geometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing Spécification géométrique des produits (GPS) Tolérancement géométrique
More informationPro Digital ebooks. Making the. Paint Bucket Work! Les Meehan
Pro Digital ebooks Making the Paint Bucket Work! Les Meehan Published by Pro Digital ebooks, this edition 2008. Copyright Les Meehan 2008 The Author asserts the moral right to be identified as the author
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60060-3 First edition 2006-02 High-voltage test techniques Part 3: Definitions and requirements for on-site testing IEC 2006 Copyright - all rights reserved No part of this publication
More informationINTRODUCTION to CAD ACAD BASICS. 2.1 Starting with ACAD. 2.2 Layout and sketching. 2.3 Drawing environment. 2.4 Elements of drawing
INTRODUCTION to CAD ACAD BASICS 2.1 Starting with ACAD 2.2 Layout and sketching 2.3 Drawing environment 2.4 Elements of drawing 2.4.1 Draw commands 2.5 3D functions 2.6 Starting the drawing 2.6.1 Drawing
More informationISO INTERNATIONAL STANDARD. Laminate floor coverings Determination of geometrical characteristics
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 24337 First edition 2006-08-01 Laminate floor coverings Determination of geometrical characteristics Revêtements de sol stratifiés Détermination
More informationISO INTERNATIONAL STANDARD. Ergonomic design for the safety of machinery Part 3: Anthropometric data
INTERNATIONAL STANDARD ISO 15534-3 First edition 2000-02-15 Ergonomic design for the safety of machinery Part 3: Anthropometric data Conception ergonomique pour la sécurité des machines Partie 3: Données
More informationMECHANICAL ENGINEERING AND DESIGN 2017/18 SEMESTER 1 MODULES
Visual Communications ENG_4_542 Tuesday and Wednesday 2pm 4pm (Tues), 9.30am 11.30am (Weds) Students attend both sessions. The module aims a) to develop the capacities of observation and visualisation,
More informationISO 1832 INTERNATIONAL STANDARD. Indexable inserts for cutting tools Designation. Plaquettes amovibles pour outils coupants Désignation
INTERNATIONAL STANDARD ISO 1832 Fourth edition 2004-06-15 Indexable inserts for cutting tools Designation Plaquettes amovibles pour outils coupants Désignation Reference number ISO 1832:2004(E) ISO 2004
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 105-B02 Sixth edition 2014-09-01 Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test Textiles Essais de solidité des
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD. Rolling bearings Balls Part 1: Steel balls
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3290-1 First edition 2008-12-15 Rolling bearings Balls Part 1: Steel balls Roulements Billes Partie 1: Billes de roulement en acier Reference number
More informationISO 9039 INTERNATIONAL STANDARD. Optics and photonics Quality evaluation of optical systems Determination of distortion
INTERNATIONAL STANDARD ISO 9039 Second edition 2008-02-15 Optics and photonics Quality evaluation of optical systems Determination of distortion Optique et photonique Évaluation de la qualité des systèmes
More informationDFTG Blueprint Reading and Sketching
Course Syllabus DFTG 1325 - Blueprint Reading and Sketching Catalog Description: An introduction to reading and interpreting working drawings for fabrication processes and associated trades. Use of sketching
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 1328-1 Second edition 2013-09-01 Cylindrical gears ISO system of flank tolerance classification Part 1: Definitions and allowable values of deviations relevant to flanks of gear
More informationCopyright Text by Published by Text & cover page Copyright
Copyright The Complete Novices Guide To Building A Website From Scratch Quickly Create Your Own Website & Make Money From It. No Experience Or Programming Knowledge Required! 1st edition 2014 Text by Mark
More informationISO/IEC TS TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION This is a preview - click here to buy the full publication ISO/IEC TS 24790 First edition 2012-08-15 Corrected version 2012-12-15 Information technology Office equipment Measurement
More informationPolygonal taper interface with flange contact surface. Part 1: Dimensions and designation of shanks
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 26623-1 Second edition 2014-09-01 Polygonal taper interface with flange contact surface Part 1: Dimensions and designation of shanks Interfaces
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 5599-1 Third edition 2001-08-15 Pneumatic fluid power Five-port directional control valves Part 1: Mounting interface surfaces without electrical connector Transmissions pneumatiques
More informationImage Resources of Didactic Relevance
Paz-y-Miño-C, G & Espinosa, A. 2016. Measuring the Evolution Controversy: A Numerical Analysis of Acceptance of Evolution at America s Colleges and Universities. Cambridge Scholars Publishing, Newcastle,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60601-1-6 First edition 2004-06 Medical electrical equipment Part 1-6: General requirements for safety Collateral standard: Usability This English-language version is derived
More informationCity University of Hong Kong. Information on a Course offered by Division of Building Science & Technology with effect from Semester A in 2012/2013
City University of Hong Kong Information on a Course offered by Division of Building Science & Technology with effect from Semester A in 2012/201 Part I Course Title: Course Code: Course Duration: Building
More informationChapter 8. Technical Drawings
Chapter 8 Technical Drawing Technical Drawings Multiview drawings Also called three-view drawings Simple objects take three views Front, top, one side Title block Identifies who did the design Gives date,
More informationROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE. Chester F. Carlson Center for Imaging Science
ROCHESTER INSTITUTE OF TECHNOLOGY COURSE OUTLINE FORM COLLEGE OF SCIENCE Chester F. Carlson Center for Imaging Science NEW COURSE: COS-IMGS-180 Introduction to Computing and Control 1.0 Course Designations
More informationWest Windsor-Plainsboro Regional School District Architectural Design and Fabrication
West Windsor-Plainsboro Regional School District Architectural Design and Fabrication Unit 1: Technical Drawings Content Area: Engineering Course & Grade Level: Architectural Design & Fabrication, 10-12
More information