DATA SHEET DEA GLOBAL SILVER 07.XX XX.07

Transcription

1 DATA SHEET DEA GLOBAL SILVER 07.XX XX.07

2 Specifications Specifications according to ISO :2009, ISO :2010 and ISO :2000 Probe Configuration Standard Temperature Range C CLIMA Temperature Range C R O,MPL E 0,MPE /E,MPE P FTU,MPE MPE THP/t E 0,MPE /E,MPE P FTU,MPE MPE THP/t GLOBAL Silver Classic HP-S-X1C + L/ L/2 1.7 HH-A, HH-AS/HP-S-X1S, H + L/ L/2 1.7 HH-A, HH-AS/HP-T, HP-TM, TP L/ L/ GLOBAL Silver Performance L/ L/2 HH-A, HH-AS/HP-S-X1S, H L/ L/2 HH-A, HH-AS/TP L/333 + L/2 HH-A, HH-AS/HP-T, HP-TM + L/ L/2 GLOBAL Silver Advantage + L/333 + L/2 1.2 HH-A, HH-AS/HP-S-X1S, H + L/333 + L/2 1.2 HH-A, HH-AS/TP L/333 + L/2 HH-A, HH-AS/HP-T, HP-TM + L/ L/2 NOTE: E 0, MPE /E, MPE specifications are to be formally understood as E 0,MPE * /E,MPE * for the case where non-normal CTE material calibrated test lengths are used. Probe Configuration for performance test: : stylus length 60 mm, tip diameter 5 mm HP-S-X1C: stylus length 20 mm, tip diameter 5 mm HP-S-X1S: without extension, stylus length mm, tip diameter 5 mm HP-S-X1H: with an extension of 100 mm, stylus length 20 mm, tip diameter 5 mm TP200: Standard Force Module, stylus length 10 mm, tip diameter 4 mm HP-T: Standard Force, stylus length 10 mm, tip diameter 4 mm HP-TM: Standard Force Module, stylus length 10 mm, tip diameter 4 mm Performance data are valid if the following specifications are met: Standard Temperature Range Ambient temperature C Max. air temperature variation 1 C/h - 2 C/24h Max. gradient in space 1 C/m CLIMA Temperature Range Ambient temperature C Max. air temperature variation 1 C/h - 5 C/24h Max. gradient in space 1 C/m Dynamics: DEA GLOBAL Silver 07.xx xx.07 Classic Performance Advantage Max. 3D Speed (mm/s) Max. 3D Accel. (mm/s 2 ) (with ) (with ) Max. Scanning speed : Performance and Classic 300 mm/s; Advantage 0 mm/s 2 DEA GLOBAL SILVER 07.xx xx.07 DS CMM 035/01 - EN -07/14

3 Strokes, Dimensions and Weights LX LZ1 PH 100 PZ DZ DZ1 Z LZ Y 6 PY 66 X SY1 SY DX LY D HP-S-X1C HH-AS8 HH-A 3 DEA GLOBAL SILVER 07.xx xx.07 DS CMM 035/01 - EN -07/14

4 Strokes, Dimensions and Weights Models Strokes Overall Dimensions X Y Z LX LY LZ LZ1 Surface Plate Daylights PZ PH Supports PY DX DZ DZ1 SY SY1 Threaded Insert D1 Max. Part Weight (kg) CMM Weight (kg) NOTE: ISO test with maximum part weight performed as an option upon request only. Probe Heads and Sensors Technical Characteristics Angular rotation Angular rotation step Rotation speed Positioning repeatability Max. applied torque Extensions HH-AS8 Indexable Probe Head A axis: +90 / -115 B axis: ± in 2 seconds 0.5 μm 0.6 Nm Max. length 300 mm HH-A Indexable Probe Head Technical Characteristics Resolution Measuring range Overtravel range Linear stiffness Stylus joint Max. stylus weight Max. stylus length HP-S-X1C <1 µm ± 2 mm in X, Y and Z ± 2 mm in all axes 1.2 N/mm M3 33 g Vertical: mm Horizontal: up to mm <1 µm ± 1 mm in X, Y and Z ± 1.25 mm in all axes 5 N/mm M5 g 360 mm 4 DEA GLOBAL SILVER 07.xx xx.07 DS CMM 035/01 - EN -07/14

5 Performance Verification E 0,MPE error of length measurement E,MPE error of length R 0,MPL limit of the repeatability range 5 gauges have to be measured 3 times with one probing at each end, in 7 different directions. All measuring results must be within E 0. 5 length gauges have to be measured 3 times in the YZ- or XZ plane with opposite styli, mounted mm off the Z spindle axis. Extreme value of the repeatability range of the length measurement error, calculated by three repeated measurements on each size for a total of 35 values. The 35 repeatability range results must be within the specified R 0,MPL. P FTU,MPE single stylus form error MPE THP/t scanning probing error A precision sphere has to be measured with 25 probings. P FTU is the range of all radii. P FTU = R max - R min = sphere form. Calibration sphere in the middle of the volume. A precision sphere has to be scanned with 4 defined lines. THP is the range of all radii. THP = R max - R min = sphere form, scanning. Calibration sphere in the middle of the volume. Technical Characteristics Guideway: Surface Plate: Sliding System: Measuring System: Temperature Compensation: Ram Counterbalance: Air Supply: X: Micromachined anodized light alloy extrusion Y: Integral dovetail guideways, machined into the table Z: Micromachined anodized light alloy extrusion Material: Granite Part Locking: Threaded inserts M8x1.25 Flatness: According to DIN 876/III Air bearings on all axes METALLUR linear scales. System Resolution: μm CLIMA: Multisensor Temperature Compensation Technology, C (optional on Classic models) Pneumatic, adjustable Minimum air supply pressure: 0.5 MPa Air consumption: Nl/min Environment: Metrological specification temperature range: Standard: C and CLIMA: C Operating Temperature: C Relative humidity: 20% - 90 % non condensing Probe Heads and Sensors: HH-A, HH-AS8, HP-S-X1C, TP200, HP-T, HP-TM, HP-S-X1 5 DEA GLOBAL SILVER 07.xx xx.07 DS CMM 035/01 - EN -07/14

6 LASER TRACKERS & STATIONS PORTABLE MEASURING ARMS BRIDGE CMMS HORIZONTAL ARM CMMS GANTRY CMMS MULTISENSOR & OPTICAL SYSTEMS WHITE LIGHT SCANNERS ULTRA HIGH ACCURACY CMMS SENSORS PRECISION MEASURING INSTRUMENTS SOFTWARE SOLUTIONS Hexagon Metrology offers a comprehensive range of products and services for all industrial metrology applications in sectors such as automotive, aerospace, energy and medical. We support our customers with actionable measurement information along the complete life cycle of a product from development and design to production, assembly and final inspection. With more than 20 production facilities and 70 Precision Centers for service and demonstrations, and a network of over 100 distribution partners on five continents, we empower our customers to fully control their manufacturing processes, enhancing the quality of products and increasing efficiency in manufacturing plants around the world. Hexagon Metrology is part of Hexagon (Nordic exchange: HEXA B). Hexagon is a leading global provider of design, measurement and visualisation technologies that enable customers to design, measure and position objects, and process and present data. Learn more at For more information, visit Hexagon Metrology. Part of Hexagon All rights reserved. Due to continuing product development, Hexagon Metrology reserves the right to change product specifications without prior notice. Printed in Germany. July 2014