D.O.T. Bullet/Bicycle Rail System - Certs Available upon request
|
|
|
- Kristin Webster
- 6 years ago
- Views:
Transcription
1 D.O.T. Picket Rail - Certs available upon request prior to ordering Top and Bottom Rail: SCH 40 Pipe x /8 x x SCH 40 Pipe x /8 x x SCH 40 Pipe x /8 x x DOT /2 SCH 10 Pipe x /8 X X DOT /2 SCH 10 Pipe x /8 X X Top and Bottom Rail Splice: /2 SCH 40 Pipe x x x /2 OD x.125 x 24 Round Tube (6061-T6) Post: x.250 Square Tube x 24 (6061-T6) x 4 x.250 Rect Tube x Picket: /4 SCH 40 Pipe x x.824 x /4 SCH 40 Pipe x x.824 x /4 Solid Round Rod x 12 (6061-T6) Post Mount: /8 x 6 Flat Bar x 12 (6061-T6511) Bent End Return: SCH 40 Pipe x 20 (6063-T52) Inner Sleeve mates with 2 SCH 40 Pipe - (6061-T6) Fabbed 2 SCH 40 Pipe x with 3/4 SCH 40 Holes (50 holes per piece) - (6061-T6) Mates with Fabbed DOT Inner Sleeve ( ) /2 SCH 40 Pipe - Mates with (6061-T6 Fabbed DOT Inner Sleeve x 16 DOT Inner Sleeve Fabbed 2 SCH 40 Pipe 3.75 between picket walls Fabbed DOT Inner Sleeve D.O.T. Round Tube T6 Stock Code Description Wt/Lin ft /2 x 1/8 x /2 x 1/4 x /4 x 1/8 x DOT x 1/8 x x 1/8 x DOT /2 x 1/8 x DOT /2 x 1/8 x DOT /2 x 1/8 x /2 x 1/8 x DOT x 1/8 x DOT x 1/8 x DOT x 1/8 x DOT x 1/8 x x 1/8 x DOT /2 x 3/16 x DOT /2 x 3/16 x DOT /2 x 3/16 x DOT x 3/16 x DOT x 3/16 x DOT x 1/4 x DOT x 1/4 x DOT /2 x 1/4 x DOT x 1/4 x 20' () DOT x 1/4 x DOT x 1/4 x D.O.T. Bullet/Bicycle Rail System - Certs Available upon request 4 Bullet/Bicycle Top Cap Mates with 3 Splice DOT x 30 DOT x 40 3 Bullet Rail Splice DOT x 21 Mates with 4 Top Cap Hand Rail Clamp Bar DOT x 21 Splice Insert Bar DOT x 20 Mates with 4 Top Cap 5 x 5 Straight H-Beam 6061-T6 DOT x 24 Bullet Rail End Cap #715 Standards 19 website: info@easternmetal.com version: 03/02/17
2 Break Away Sign Pole Bases for Single Column Signs Sign Pole Bases - Manufactured in accordance with Florida DOT Roadway and Traffic Design Standard Indexes ( ) Product Code Size Product Code Size DOT-4-BPB 4" DOT-5-BPB 5 DOT-4.5-BPB 4-1/2" DOT-6-BPB 6" Sign Pole Bases with Bolt Kits DOT-4-BPBPKG 4" DOT-5-BPBPKG 5 DOT-4.5-BPBPKG 4-1/2" DOT-6-BPBPKG 6" Break Away Sign Pole Base Bolt Kits - Hardware meets requirements of ASTM A325 and ASTM A307 Bolt Kits for 4"; 4.5 and 6 Break Away Bases Product Code Description and Contents DOT-4-KIT (4) 5/8" x 3" Hex Bolts (4) 5/8" Nuts (12) Flat Washers (4) 1/2" x 6" Hex Bolts DOT-4.5-KIT DOT-5-KIT DOT-6-KIT Shims DOT-2-Shim DOT-3-Shim (4) 5/8" x 3-1/4" Hex Bolts (4) 5/8" Nuts (12) Flat Washers (4) 1/2" x 6-1/2" Hex Bolts (4) 5/8" x 3-1/4" Hex Bolts (4) 5/8" Nuts (12) Flat Washers (4) 1/2" x 6-1/2" Hex Bolts (4) 3/4" x 4" Hex Bolts (4) 3/4" Nuts (12) Flat Washers (4) 1/2" x 8" Hex Bolts FDOT approved shim for single column ground signs FDOT approved general purpose shim Flat Bar Base Plate x 12 - M/F Stock Code Size (Size x Wall) Wt/Lin ft /2 x 6 x /8 x 6 x Bolt Kit DOT Shims Fabbed Soil Plate DOT-14-SP 1/4" Aluminum Plate (8 x 12 x 14 ) 6061-T6 DOT-12-SP 1/8" Steel Plate (6 x 8 x 12 ) Aluminum Soil Plate FDOT Approved U-Bolts ASTM A-307 Galvanized U-Bolts with lock washers and nuts. DOT-2-UBOLT 2 U-Bolt DOT-4-UBOLT 4 U-Bolt DOT-2.5-UBOLT 2-1/2 U-Bolt DOT-4.5-UBOLT 4-1/2 U-Bolt DOT-3-UBOLT 3 U-Bolt DOT-5-UBOLT 5 U-Bolt DOT-3.5-UBOLT 3-1/2 U-Bolt DOT-6-UBOLT 6 U-Bolt Steel Soil Plate U-Bolts Installed Soil Plate: Front & Back views; shown attached with FDOT approved U-bolts D.O.T. Signage 12 x 2 Sign Panel MILL ORDER EMSW14792 Heavy MILL ORDER EMSW14794 Medium MILL ORDER EMSW14793 Light 6 x 2 Half Sign Panel MILL ORDER EMSW x 2.5 Wind Beam MILL ORDER EMSW Extruded Street Name Blade x (TX) 6.75 Extruded Street Name Blade MILL ORDER (TX) 9 Extruded Street Name Blade x (TX) Standards 20 website: info@easternmetal.com version: 03/02/17
3 Aluminum Zees T6 x 25 Approx. Stock Code (E x M x S) Wt/Lin ft /4 x 1-3/4 x 3/ x 2-11/16 x 1/4 x 18' x 2-11/16 x 1/ x 2-11/16 x 1/4 x x 2-11/16 x 1/4 x 40' x 2-11/16 x 3/ MILL ORDER (NC) 4 x 3-1/16 x 1/ /16 x 3-1/8 x 5/ MILL ORDER 4-1/8 x 3-3/16 x 3/ MILL ORDER 5-1/16 x 3-5/16 x 3/ x 3-1/4 x Mill Finish Fabbed Z-Bar (D.O.T. with holes and slots) /4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x FZ 1-3/4 x 1-3/4 x 3/16 x Cargo/Food Truck Door Frame x (TX) 6063-T6 Fabricated Z-Bar Aluminum Tees T6 x 25 Architectural Aluminum Tees T5 x x 1 x 1/ Structural Aluminum Tees T6 x 25 MILL ORDER 1 x 1 x 1/ /2 x 1-1/2 x 3/ MILL ORDER /2 x 1-1/2 x 1/ x 2 x 1/ x 2 x 1/4 (x 32 ) MILL ORDER (NC) 2-1/2 x 2-1/2 x 5/ MILL ORDER x 2-1/2 x 5/ MILL ORDER 4 x 3 x 3/ Gunwale/Gunnel T6 Suggested Applications: Boat Gunwales/Gunnels, Airboat applications x 2 x 1/8 x 32' Mill Finish Gunwales/ Gunnel Product codes listed on MILL ORDER items are for die reference only. Customer must specify length, alloy & temper. Standards 33 website: info@easternmetal.com version: 02/23/18
4 Round Aluminum Tube 6063-T5 x 24 (Unless noted otherwise) Stock Code (Size x Wall) Wt/Lin ft x.065 (.620 ID) x.062 (.751 ID) (6060 T6 - Furniture Grade) x.062 (.880 ID) x 20' (6060 T6 - Furniture Grade) FG 1 x.062 (.880 ID) (6060 T6 - Furniture Grade) MILL ORDER 1 x.063 (.880 ID) x24' - Welded Tube (17-WT-115) x.125 (.750 ID) x.062 (1.126 ID) x.062 (1.126 ID) (6060 T52 - Furniture Grade) x.090 (1.070 ID) x.125 x 16' (1.000 ID) (6063 T52) x.125 x 20' (1.000 ID) (6063 T52) x.065 (1.370 ID) x.090 (1.320 ID) x.093 (6061) x.125 (1.250 ID) x.125 (1.250 ID) (6061) T x.125 (6063 T4) x.125 x 20' (1.250 ID) (6063 T52) x.125 x 30' (1.250 ID) (6063 T52) C-Insert x 12 - for x.125 Tube (6063-T6) x.250 x 24 (6061) x.125 (1.500 ID) (6061) x.050 (1.900 ID) x.065 (1.870 ID) x.125 (1.750 ID) x.125 (1.750 ID) (6061) DOT x.125 x x.125 x 20' (1.750 ID) (6063 T52) x.250 (1.500 ID) (6061) MILL ORDER x.125 (6463-T67) MILL ORDER x.125 (6463-T67) x.120 (2.000 ID) (6063 T52) x.125 (2.250 ID) (6061) DOT x.125 x DOT x.125 x DOT x.125 x x.083 (2.834 ID) x.125 (2.750 ID) x.125 (2.750 ID) (6061) DOT x.125 x DOT x.125 x DOT x.125 x DOT x.125 x x.293 x 20 (2.415 ID) (6061) x.540 x 20 (1.920 ID) (6061) Winder Tube DOT x.1875 x DOT x.1875 x DOT x.1875 x Round Aluminum Tube (continued) Stock Code (Size x Wall) Wt/Lin ft x.125 (3.750 ID) x.125 (3.750 ID) (6061) DOT x.1875 x DOT x.1875 x DOT x DOT x.250 x DOT x.250 x x.125 (4.750 ID) x.188 () DOT x.250 x 20' () x.125 (5.750 ID) x 20' MILL ORDER 6 x.188 (5.624 ID) DOT x.250 x DOT x x.125 (7.750 ID) (6063 T6) MILL ORDER 8 x.156 (7.688 ID) Drawn Tube (6063-T832 x 24 ) x.042 x 16 (1.041 ID) Mates with (Clear Anodized) MILL ORDER x.049 (1.152 ID) (MO) Mates with (Clear Anodized) MILL ORDER x.049 (1.277 ID) (MO) Mates with (Clear Anodized) MILL ORDER x.049 (1.402 ID) (MO) Mates with (Clear Anodized) MILL ORDER x.049 (1.777 ID) (MO) Mates with (Clear Anodized) MILL ORDER x.049 (1.902 ID) (MO) Mates with (Clear Anodized) Brite Dipped Drawn Tube 25-BD x.058 x pcs/box 25-BD x.058 x pcs/box 25-BD x.058 x pcs/box 25-BD x.058 x pcs/box 25-BD x.095 x 24' 38 pcs/box Superbuff Stainless Steel Tube x INCREASED INVENTORIES! 316 Alloy - typically used in Saltwater applications Stock Code Lgths./Box /8 x 16 gauge (.062) x 16 gauge (.062) 16 Product codes listed on MILL ORDER items are for die reference only. Customer must specify length, alloy & temper. Standards Alloy - typically used in Saltwater applications Stock Code Lgths./Box /8 x 16 gauge (.062) x 16 gauge (.062) 16 Serrated & Fluted/Scalloped Round Tube See Next Page (Standards 18) for full listing website: info@easternmetal.com version: 02/22/18
5 Aluminum Sheet & Plate 5052 H38 Alodine Pretreated Sheet Approx. Stock Code Wt/Sheet x 30 x x 30 x x 30 x x 36 x x 36 x x 36 x A.080 x 48 x x 48 x x 30 x x 30 x x 30 x x 36 x x 36 x x 36 x x 48 x x 48 x x 48 x Contact your EMS Sales Representative for SPECIAL ORDER Sign Blanks *See Tubes & D.O.T. Tab (Standards pp 17-20) for additional items D.O.T. Signage 12 x 2 Sign Panel MILL ORDER EMSW14792 Heavy MILL ORDER EMSW14794 Medium MILL ORDER EMSW14793 Light 6 x 2 Half Sign Panel MILL ORDER EMSW14795 Product codes listed on MILL ORDER items are for die reference only. Customer must specify length, alloy & temper. 3 x 2.5 Wind Beam MILL ORDER EMSW Extruded Street Name Blade x (TX) 6.75 Extruded Street Name Blade MILL ORDER (TX) 9 Extruded Street Name Blade x (TX) Standards 08 website: info@easternmetal.com version: 08/17/16
5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
ALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
SIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
MAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standar 4-piece, Pelco also manufactures the bases with an
SIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
Screen Room Enclosure Shapes
1/2 x 2 Archway x 24 x.040 min. (Patio) 200-WH-029 White 200-MB-029 1 x 2 Open Back x.040 min. (Patio) 200-WH-001 42-WH-002 (MO) 200-MB-001 42-MB-002 (MO) 200-WH-002 200-MB-002 1 x 3 Open Back x.040 min.
STEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
AUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
UPM 6X. UPM 6X Standard stock Tee socket sized for 5" schedule 40 or 80 Pipe. Page 1 of 8
Page 1 of 8 UPM 6X A. TEE SOCKET: 6 O.D. PIPE SOCKET TO FIT OVER 5 SCHEDULE 40 OR 80 STEEL PIPE B. CROSS PIECE: 2 X 2 X 1/8, LENGTH DEPENDENT ON MODULE USED, SQ. TUBE 2 PLACES C. LONGITUDINAL: 2 X 2 X
(50 FT FT) MICHIGAN DEPARTMENT OF TRANSPORTATION 10-0" 7-6" 8-0" 6-0" Truss Depth. 3" sheets 5 & 6 of 10) DEPARTMENT DIRECTOR. Kirk T.
Column truss connection (See details sheets 3 & 4 of 10) \ Span (Odd number of panels) \ Span (Even number of panels) Back truss chord Top truss chord \ Truss Chord splice Truss depth (See details \ Left
Midwest Roadside Safety Facility
2 Spaces @ 75" [05]= 150" 3810 4 Spaces @ 3 Spaces @ 4 Spaces @ 18.75" 37.5" [953]= 37.5" [953]= [476] 112 1/2" 150" = 75" 2857 3810 [05] 18 476 7 Spaces @ 75" [05]=525" [13335] 21 20 18 17 1615 14 1312
UPM 10X and 10XHD A. TEE SOCKET: 7 O.D. PIPE SOCKET TO FIT OVER 6 SCHEDULE 40 OR 80 STEEL PIPE
Page 1 of 8 UPM 10X and 10XHD A. TEE SOCKET: 7 O.D. PIPE SOCKET TO FIT OVER 6 SCHEDULE 40 OR 80 STEEL PIPE B. CROSS PIECE: 3 X 3 X 3/16, LENGTH IS 60 (10X) or 78 (10XHD), SQ. TUBE 2 PLACES C. LONGITUDINAL:
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
TYPE J (20 FT - 40 FT) MICHIGAN DEPARTMENT OF TRANSPORTATION 10-0" 7-6" NOTE: sheet 5 & 6 of 10) DEPARTMENT DIRECTOR. Kirk T.
Column truss connection Chord splice (see details (See details sheets 3 & 4 of 10) s Top truss chord Free end panel 10-0" Support end panels length varies (See chart below) \ Truss Back truss chord Top
SPECIFICATIONS FOR TRAFFIC CONTROL SIGNS STREET MARKER BLADES SIGN POSTS MOUNTING BRACKETS AND INSTALLATION
SPECIFICATIONS FOR TRAFFIC CONTROL SIGNS STREET MARKER BLADES SIGN POSTS MOUNTING BRACKETS AND INSTALLATION I. GENERAL A. The following specifications shall be used for all traffic control signage and
UPM 6X Custom. UPM 6X CUSTOM Standard stock Tee socket sized for 5" schedule 40 or 80 Pipe. Page 1 of 8
Page 1 of 8 UPM 6X Custom A. TEE SOCKET: 6 O.D. PIPE SOCKET TO FIT OVER 5 SCHEDULE 40 or 80 STEEL PIPE B. CROSS PIECE: 2 X 2 X 3/16, LENGTH DEPENDENT ON MODULE USED, SQUARE TUBE 2 PLACES C. LONGITUNDINAL:
SIGN MOUNTED BEACON SIG-027-A SINGLE SIGN MOUNTED FLASHING BEACON INSTALLED ON ONE WOOD POST DETAIL "A-1"
1 1/2" x 60" Galvanized (thread both ends) Top Bolt See Detail "A-1" and Slotted Channel Parallel Conduit Clamp Warning Sign 3 Equal Bolt Spacings (3 places at 12" min. spacing) (1) 3/8"x 7" min. (4"x
Door Canopy. PDL Building Products Industrial Parkway, N. Olmsted, OH Phone:
Door Canopy Door Canopies are attractive and efficient while eliminating the need and expense of drafting and manufacturing canopies as part of the building package. Construction: 26 gauge material around
Midwest Roadside Safety Facility
28 Spaces @ 75"=2100" 100' 3:1 Cut 40' 75" (TYP.) 3:1 Soil Cut 3:1 1 2 3 4 5 6 7 8 9 10 25 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 26 75" 300" or Two 12'-6" Section End Section 300" or Two 12'-6"
UP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
BASEBALL FOUL POLES SURFACE MOUNTED
Page 1 of 5 Installation Instructions 1. 2. Check all items against parts list to ensure all parts have been included. Locate and drill holes for concrete footings. See Details A and B for critical information
Midwest Roadside Safety Facility
28 Spaces @ 75"=175'-0" 6'-3" (TYP.) 8'-0" Soil Cut 1 2 3 4 5 6 7 8 9 10 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 25 C.I.P. 26 6'-3" 25'-0" or Two Section End Section 25'-0" or Two Section End Section
UP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
Transmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
P SERIES. and MASON CORPORATION
P SERIES CATAL ALOG Carpor ports and Patio Cover ers Corporate Office 123 Oxmoor Road West Birmingham, AL 35209 P.O. Box 59226 Birmingham, AL 35259-9226 Telephone: 1/800/868-4100 Fax: (205) 945-4304 Mason-Columbia
Pole Mount Installation Manual
Pole Mount Installation Manual Thank You for Choosing AIMS Power! 1. AIMS Power is a leading supplier of solar products, specializing in PV mounting systems. We ensure our products are manufactured to
1.1 SUMMARY. A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards.
PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards. B. See Division 5 Section "Pipe and Tube Railings"
INSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
RBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
10-1.5mm x 40mm Hex Bolt 1 Driver/Left Front Inner Support Bracket (2WD & 4WD Vehicles W/O Skid Plate Only) 2
PARTS LIST: 3" ROUND SIDEBARS 1 Driver/Left sidebar 4 12mm x 32mm OD x 3mm Flat Washer 1 Passenger/Right sidebar 4 12mm x 24mm OD x 2.5mm Flat Washer 1 Driver/Left Mounting Bracket 6 12mm Lock Washers
10-1.5mm x 40mm Hex Bolt 1 Driver/Left Front Inner Support Bracket (2WD & 4WD Vehicles W/O Skid Plate Only) 2
PARTS LIST: 1 Driver/Left sidebar 4 12mm x 32mm OD x 3mm Flat Washer 1 Passenger/Right sidebar 4 12mm x 24mm OD x 2.5mm Flat Washer 1 Driver/Left Mounting Bracket 6 12mm Lock Washers 1 Passenger/Right
Midwest Roadside Safety Facility
19'-11 1/2" 6083 239'-11 1/2" 73139 Impact 1100C 25 43 5/16" 1100 upstream from the upstream face of the first shear fender downstream of the joint between barrier nos. 7 and 8 Upstream End Downstream
INSTALLATION INSTRUCTIONS GRILLE GUARD CHEVY TAHOE / AVALANCHE 1500/ SUBURBAN 1500 PART # /502795
(W) INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 502794/502795 PARTS LIST: 1 Grille Guard 2 12-1.75mm x 140mm Hex Bolts 2 Frame Mounting Brackets 8 12-1.75mm x 30mm Hex Bolts 2 Lower Support Brackets
Roof-Top Applications
Roof-Top Non-Penetrating Flat Roof Mounts Pre galvanized mast, base and Rubber Mat Designed for DSS support 103489 103490 103491 103492 103493 FRM Non-Penetrating Roof Mount (1.25" O.D. Tubing, 60" Overall
DBP Technical Data Series Rev. 0 Jan. 1, Pre Assembled Door Canopies
Technical Data Series Revised: 1 January, 2011 Article IX. SECTION 9.01 PERSONAL DOOR CANOPIES...3 SECTION 9.02 ERECTION INSTRUCTIONS...4 SECTION 9.03 ERECTION ILLUSTRATIONS...7 SECTION 9.04 MULL INSTRUCTIONS
Midwest Roadside Safety Facility
28 Spaces @ 75"=175'-0" 100'-0" 3:1 Cut 40'-0" 6'-3" (TYP.) 3:1 Soil Cut 3:1 1 2 3 4 5 6 7 8 9 10 25 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 26 6'-3" 25'-0" or Two Section 12-gauge End Section 25'-0"
INSTALLATION INSTRUCTIONS 3"/4 BENT END SIDEBARS FORD F-150 SUPERCREW PART # DZ /DZ
INSTALLATION INSTRUCTIONS 09-12 FORD F-150 SUPERCREW PART # DZ 372697/DZ 372699 PARTS LIST: 1 Driver/Left Sidebar 4 1/2 Lock Washers 1 Sidebar 4 12mm x 32mm OD x 3mm Flat Washers 1 Driver/Left Mounting
Before returning this product to the store of purchase
Before returning this product to the store of purchase Contact Dee Zee if you experience the following problems: Missing Parts Installation Problems/Questions Warranty Questions 1.800.779.2102 Hours of
SIGNALS AND LIGHTING FIELD GUIDE
CHAPTER 16 SIGNAL AND LIGHT POLES SIGNAL AND LIGHT POLES The standards and requirements for installing traffic control signal and light poles are presented in this chapter. 16.1 Traffic Control Signal
Pipe Restrainers series C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings
Pipe Restrainers series 1000 1000C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings INFORMATION Restrainers for restraining mechanical joint or push-on fittings
Solar Panel Top-of-Pole Mounting Kit For Panels Over 100 Watts Including CMP Panels
Solar Panel Top-of-Pole Mounting Kit For Panels Over 100 Watts Including CMP Panels Thank you for purchasing the top-of-pole solar panel mounting kit. This mounting system is designed to enable the solar
IIHS Side Impact Outrigger
IIHS Side Impact Outrigger Assembly Procedure Base Assembly (14.3 lbs) The base assembly consists of a ¼ thick steel plate, a ¼ thick piece of polyethylene, and mounting fixtures for the upper and lower
HEARNE STEEL CO., INC.
HEARNE STEEL CO., INC. INDUSTRIAL PARK 1011 VAUGHN LANE HEARNE, TEXAS 77859 Leading Manufacturers Of Chain Link Fence Fittings J.C. AMOS, (1921-2008) OFFICE ADDRESS: R.W. AMOS, President P. O. BOX 1239
END VIEW WEDGE TOP VIEW WOOD POST FOUNDATION DETAILS
X (NOMINAL POST) 1-1/ DIA. 2 HOLES X 8" (NOMINAL POST) 3-1/ DIA. 2 HOLES TAPERED HARD WOOD WEDGES (HARDWOOD WEDGE TO BE OAK, MAPLE OR OTHER APPROVED DENSE HARDWOODS) TO HOLD POST IN A STABLE POSITION AFTER
Passenger/Right Front Mounting Bracket
PARTS LIST: 1 Driver side running board 1 8mm Insert Installation Tool 1 Passenger side running board 4 10-1.50mm x 35mm Hex Bolt 1 Driver 10 10mm x 24mm OD x 2.2mm Flat Washer 1 Passenger 6 10mm Lock
3" SIDEBAR CHEVY TRAVERSE/GMC ACADIA/07-10 SATURN OUTLOOK/07-09 BUICK ENCLAVE (EXCL BUICK ENCLAVE)
PARTS LIST: 1 Driver/Left Sidebar 6 s 1 Passenger/Right Sidebar 6 12mm ID x 32mm OD x 3mm Flat Washers 1 Driver/Left Mounting 6 s 1 Passenger/Right Mounting 4 10mm Lock Washers 1 Driver/Left Mounting 4
Empire & SunWise Collectors. Imperial Collectors. Copperheart ICS (asphalt shingles)
Standoff Mounting Standoff mounting is the simplest and most cost effective way to install SunEarth solar collectors on sloped roof surfaces. Standoff mounting components are designed to lift the collectors
INSTALLATION INTRUCTIONS
INSTALLATION INTRUCTIONS Page 1 of 9 Installation Instructions 1. 2. Check all items against parts list to ensure all parts have been included (see pages 6,7,8,9). Locate and drill holes for concrete footings.
Ground Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
Fixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
Post & Rail. Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail POST SUPPORT OPTIONS
Post & Rail Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail STAGGER RAIL ENDS FOR GREATER STRENGTH ALLOW 1-1/2" GAP ON HINGE SIDE OF GATE AND 1-1/4" ON LATCH SIDE OF GATE HARDWARE DIG HOLES 30" MINIMUM
ARCHITECTURAL HARDWARE
05 52 00/JOH BuyLine 7969 ARCHITECTURAL HARDWARE 2009 AMERICA S #1 MANUFACTURER OF STAINLESS STEEL CABLE FITTINGS - SINCE 1958 C. Sherman Johnson Co. Inc. East Haddam, CT USA 1-800-874-7455 www.csjohnson.com
RAIL PANEL AT TRANSITION SECTION PLAN - POST DETAIL PLAN - TUBE SPLICE. Colorado Department of Transportation. Staff Bridge Branch
Limits of pay length for Bridge RailType 10M (For post spacing, see Dwg. No. B ) B60610 (Use with B60610A) 8 min. 1 max. 8 min. 1 max. 10 0 Max. 10 0 Max. post spacing 10 0 Max. 2 5 Post 1 x 1 slotted
Size Grade Torque 9/ ft/lbs. 5/ ft/lbs. 3/ ft/lbs. 7/ ft/lbs ft/lbs.
8-3 HJ3205,Rev 4 BOlT TORQUE SPECIfICATIONS STANDARD BOlTS: Size Grade Torque 5/6 5 20 ft/lbs. 3/8 5 35 ft/lbs. 7/6 5 56 ft/lbs. /2 5 85 ft/lbs. Size Grade Torque 9/6 5 23 ft/lbs. 5/8 5 70 ft/lbs. 3/4
Steel Casework Metal Framing System
MISCELLANEOUS ITEMS Continuous Slot Metal Framing System Installs quickly Completely adjustable Re-usable Eliminates all welding, drilling and use of special tools G23 METAL FRAMING SYSTEM 1. Place the
TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
TENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
Hex Head Bolt Set N - Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". Standard Grade (f) Part #24279
a Standard Grade (3/16 ) and Commercial Grade(1/4 ) Tie Down Is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" carriage bolts. All male and female dock
M2 Antenna Systems, Inc. Model No: YAGI ANTENNA
M Antenna Systems, Inc. Model No: 4.5-7 YAGI ANTENNA SPECIFICATIONS: Model... 4.5-7 Frequency Range... 4.0 To 4.5 MHz *Gain... 0 To 7 dbi Front to back... 0 db over the rear 80 Beamwidth... E=44 H=50 typical
How to Identify a PBM VALVE SERIES
How to Identify a PBM VALVE SERIES Series 0 (SP, DP, MP) 1. If it is a manual valve, the handle generally would be made of a cast iron or cast bronze. 2. If it is a manual valve, the stem at the very top
PRODUCT DATA CATALOG
PRODUCT DATA CATALOG CONTENTS PAGE STANDARD ELEVATIONS 2 STANDARD ELEVATIONS 3 DOOR SPECIFICATIONS 4 LOUVER SPECIFICATIONS 5 GLAZING SPECIFICATIONS 5 DOOR HANDING CHART 6 CLINE STANDARD HARDWARE LOCATIONS
FRONT AND REAR HOOD ASSEMBLY (GRAIN CART) REF PART# DESCRIPTION QTY RETAIL
FRONT AND REAR HOOD ASSEMBLY (GRAIN CART) 1 0001-014311 GRAIN CART STEEL FRONT HOOD 1 1A 0001-014313 GRAIN CART 5" OFFSET STEEL FRONT HOOD 1 2 0001-014312 GRAIN CART STEEL REAR HOOD 1 N/A 0001-014901 GRAIN
SECTION - 3 EARTHING CLAMPS & FITTINGS
SECTION - 3 EARTHING CLAMPS & FITTINGS 78 EARTHING CONDUCTOR TO FLAT SURFACE TYPE ESS - SINGLE CONDUCTOR TYPE EST - TWIN CONDUCTOR Types ESS (single conductor) and EST (twin conductor) clamps are designed
FIRE PROTECTION PRODUCTS
FEATURES Rev. 7-11 Mueller Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also,
FURNITURE LABORATORY METAL FRAMING SYSTEM. For additional information and help in planning contact Mott Manufacturing.
LABORATORY Continuous Slot Metal Framing System For additional information and help in planning contact Mott Manufacturing. G22 Connection Instructions Installs quickly Completely adjustable Re-usable
AMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV
Standard Pole Mount Parabolic Antenna Mounting Instructions 3 ft. (90cm) & 4 ft. (120cm)
495 R Billerica Ave. N. Billerica, MA 01862 USA Tel: (978) 459-8800 Fax: (978) 459-3310 / 8814 www.radiowavesinc.com email: sales@radiowavesinc.com Standard Pole Mount Parabolic Antenna Mounting Instructions
MDOTProjectwise\Documents\Reference Documents\Traffic Reference\Statewide Special Details\Develop
500 460 MDOTProjectwise\Documents\Reference Documents\Traffic Reference\Statewide Special Details\Develop Check if Applicable TRAFFIC SIGNAL SPECIAL DETAILS INDEX/CHECKLIST *One completed checklist required
ASSEMBLY INSTRUCTIONS
Universal Top-of-Pole Mount 8 Modules (UTPM8) Module Type G ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 022714-1 Universal Top-of-Pole Mount 8 Modules (UTPM8) for
Brackets and Tenons. Product Specifications. PB Series XA-TMDA8
Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation
INSTALLATION INSTRUCTIONS 3 BULL BAR 99-04, 04 "HERITAGE" F-150/250LD 2WD, 97-04, 04 "HERITAGE" 4WD WD EXPEDITION/ WD EXPEDITION PART
INSTALLATION INSTRUCTIONS 3 BULL BAR PART #B-F1971;B-F2971 PARTS LIST: 1 Bull Bar 2 12-1.75mm x 130mm x 40mm Hex Bolts 1 Driver/Left Mounting Bracket 4 12-1.75mm x 35mm Hex Bolts 1 Passenger/Right Mounting
INSTALLATION INSTRUCTIONS / DODGE RAM CREW CAB 2500/3500
INSTALLATION INSTRUCTIONS 225019 / 225019-2 2010 DODGE RAM CREW CAB 2500/3500 PARTS LIST: Qty Description Qty Description 1 Driver/Left Side Bar 4 Plastic Square Retainer 1 Side Bar 2 12mm x 120mm Hex
TREX POST MOUNT DECKING AND CONCRETE
TREX POST MOUNT DECKING AND CONCRETE for Pressure-treated Wood Framing LOCATION AND INSTALLATION OF POST MOUNTS IMPORTANT NOTES:» EACH POST MUST BE ATTACHED AS SHOWN TO ENSURE A CODE COMPLIANT AND SAFE
W & A PARTS MANUAL STACKER BUSTER LEVEL BANDER. Model No Quality Products from W & A MANUFACTURING COMPANY
W & A PARTS MANUAL 12 ROW @ 38 STACKER BUSTER LEVEL BANDER Model No. 3668 SPECIALIZED FARM EQUIPMENT Quality Products from W & A MANUFACTURING COMPANY P.O. Box 5238, Pine Bluff, Arkansas 71611 Phone: (870)
Midwest Roadside Safety Facility
B 64" 1626 602'-8 1/16" 183695 548'-0" 167030 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 373839 40 25 IMPACT 1500A 48" 12 27'-5" 8355 [] 3x7 CL A Galvanized
55000/55010 Installation Instructions
A. Install 55015 B. Bolt roof rails, 55020/55025, to front hoop. C. Assemble 55026 D. To install without drilling into bumper. E. If mounting directly to bumper. A. 55015 Installation Instructions 55000/55010
INSTALLATION INSTRUCTIONS 6 OVAL BENT END SIDEBARS DODGE RAM 1500, CREW CAB PART#: /241533B
PARTS LIST: 1 Driver/Left Sidebar 24 8mm x 24mm x 2mm Flat Washers 1 Passenger/Right Sidebar 12 8mm Lock Washers 3 Driver/left, Passenger Center and Rear 6 8mm Hex Nuts 3 INSTALLATION INSTRUCTIONS 6 OVAL
BASEBALL FOUL POLES GROUND SLEEVE MOUNTED
X X Page 1 of 6 GROUND SLEEVE INSTALLATION Ground Sleeve Foul Pole Size "A" F39901 32' and 40' 67 5/8" F39902 24' 67 5/8" F39903 16' 43 5/8" 00402000 12' 29 3/8" 7" ONE SET OF SLOTS MUST BE PARALLEL AND
Mast Solutions Document/Installation Manual
Mast Solutions Document/Installation Manual The Mast family from Veritas is the perfect answer to movable and stationery partitions and room dividers, and hinged doors. This system is extremely versatile
ASSEMBLY INSTRUCTIONS
Universal Top-of-Pole Mount 6 Modules (UTPM6) Module Type G ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version 1, Rev A PCN 020314-1 Universal Top-of-Pole Mount 6 Modules (UTPM6) for
C70 Window Roller Repair Taken from: Heres the problem:
C70 Window Roller Repair Taken from: http://www.volvospeed.com/vs_forum/topic/115086-how-to-c70-window-rollers-permanent-fix/ Heres the problem: This happened to two separate window assemblys on my c70
11-1/4 OD at Transition Point. Microcosmic. 4th and Brannan Street Platform Station Project. Elevation. Moto Ohtake 2014
74 480 330 90 72 180 150 60 90 18 11- OD at Transition Point 36 184 74 Microcosmic Elevation 14 1 Moto Ohtake I. GENERAL NOTES: A. SCULPTURE DESIGN CRITERIA 1. CALIFORNIA BUILDING CODE (CBC, 2010 EDITION)
INSTALLATION INSTRUCTIONS
TEL1-866-XANATOS INSTALLATION INSTRUCTIONS PART#: BB080800\BB080800A 2 CITY BAR FOR JEEP PATRIOT 4X4 & 4X2 08-09 PARTS LIST: 1 City Bar 2 12-1.75mm x 50mm Hex Head Bolts 1 Center Tube Bracket 4 12-1.75mm
Roof Mount Ground Mount Specialised Clamps Spares Application Notes
DPA Solar Racking Solutions Solar PV Racking Catalogue Roof Mount Ground Mount Specialised Clamps Spares Application Notes www.dpasolar.com.au 1300 447 500 Rails & Splices Page 3 Mid & End Clamps Page
ASSEMBLY INSTRUCTIONS
Universal Top-of-Pole Mount 5 Modules (UTPM5) Module Type G ASSEMBLY INSTRUCTIONS step-by-step assembly and installation Version, Rev A PCN 0904- Universal Top-of-Pole Mount 5 Modules (UTPM5) for Module
MISCELLANEOUS SIGN CONNECTION DETAILS TYPICAL ROUTE MARKER ASSEMBLIES SIGN TO POST MICHIGAN DEPARTMENT OF TRANSPORTATION
5-4" SEE DETAIL I COUPLING BAR ON 3 2-10" CANTILEVER SIGN SUPPORT TYPICAL ROUTE MARKER ASSEMBLIES 5/1 DIAMETER STAINLESS STEEL BOLT AND NYLON INSERT LOCK NUT SELF-ALIGNING STEEL REINFORCING PLATE ( TYPE
PACKING LIST MACO V-5000
PACKING LIST MACO V-5000 PART QTY O.D. SIZE LENGTH DESCRIPTION CHECKLIST T47P 4 5/8.050 36 Aluminum Tubing _ T43P 1 7/8.050 48 Aluminum Tubing _ T18P 1 3/4.050 48 Aluminum Tubing _ T15P 1 5/8.050 48 Aluminum
Pole Mounting System Installation Manual
Pole Mounting System Installation Manual Thank You For Choosing Hopergy! Why Hopergy 1. Hopergy is a professional supplier, specialising in PV mounting systems. We have experienced engineers and strong
BEAST THE. Tube and Pipe Notcher Operating Instructions. Notches In Bends Straight Notches. Angled Notches. Offset Notches
Copyright (c) 2007 J D SQUARED INC. www.jd2.com THE BEAST Tube and Pipe Notcher Operating Instructions Notches In Bends Straight Notches Angled Notches PATENT PENDING Offset Notches Assembly After unpacking
GENERAL ELEVATION SECTION A-A
NORTH OR WEST Final pavement Elev. m @ roadway 12 352 out to out precast backwall panels Final pavement Elev. m @ roadway SOUTH OR EAST Pile cut-f Elev. m Pile cut-f Elev. m 3:1 3:1 Approx. existing groundline
Directive Systems & Engineering 2702 Rodgers Terrace Haymarket, VA
Directive Systems & Engineering 2702 Rodgers Terrace Haymarket, VA 20169-1628 www.directivesystems.com 703-754-3876 25 Element 7.4 wl. K1FO Designed Yagi, Model DSEFO432-25 ELECTRICAL SPECIFICATIONS Frequency
INSTALLATION MANUAL IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA MANUAL PART NUMBER:
PARTS-1 Model 24562/28562 Crane INSTALLATION MANUAL IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NUMBER: 99903701 Iowa Mold Tooling Co., Inc. is an Oshkosh Truck
Khathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
1.8 METER SERIES 1184 ANTENNA SYSTEM
REVISION F January 10, 2002 ASSEMBLY MANUAL 1.8 METER SERIES 1184 ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 1.8 METER SERIES 1184 ANTENNA SYSTEM F Revised Address 1/10/02
INSTALLATION INSTRUCTIONS
TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS PART#: 17A110200MSS\17A110200MA MODULAR GRILL GUARD FOR NISSAN FRONTIER 05-10//PATHFINDER 05-07 1 guard, center section 1 brush guard, left side 1 brush guard,
SECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
CAPX Installation Print 4/10/ CAB ASSEMBLY Part Pos Description Quantity Foot Notes CAB SECTION PLATE, MO
CAPX Installation Print 4/10/2019 6245100014 CAB ASSEMBLY Part Pos Description Quantity Foot Notes 6245100008 1 CAB SECTION 1 + 6705100023 2 PLATE, MOUNTING 1 6705012439 3 PLATE, MOUNTING 1 6326100000
Post & Rail Crossbuck
Post & Rail Crossbuck 1. Getting Started 6. Crossbuck Be sure to call underground prior to digging Assemble gates (if necessary) and decide where they will be located Stake out the fence line Space and
CHEV / GMC 3500 HD RT II TM UNDERCARRIAGE MOUNTING INSTRUCTIONS (PART NO. LTA03598)
BOSS PRODUCTS A Division of Northern Star Industries, Inc. P.O. Box 787 Iron Mountain MI 49801-0787 www.bossplow.com 1991-2002 CHEV / GMC 3500 HD RT II TM UNDERCARRIAGE MOUNTING INSTRUCTIONS (PART NO.