CYLINDRICAL STUD MOUNT SERIES
|
|
|
- Mary Byrd
- 6 years ago
- Views:
Transcription
1 CYLINDRICAL STUD MOUNT SERIES Features Reduce transmitted vibration from rotating or reciprocating machinery Reduce transmission of structureborne noise Available in a wide range of load ranges Sturdy, reliable construction Benefits Economical Prevent shock and vibration damage to sensitive equipment Versatile, low-cost, lightweight stud type mounts for vibration, shock, noise control, and motion accommodation. Load Range 3 styles with load ratings to 26 lbs. per isolator Barry Stud Mounts are designed to support loads up to 26 lbs. per mount in compression and up to 7 lbs. in shear. Their simple design and sturdy construction permit their use in a wide variety of industrial applications. Available in 3 styles: (1) Double stud, (2) Stud/Insert, (3) Bumpers. Applications Fans Appliances HVAC equipment Electronic equipment Pumps, relays & control panels Blowers Bumpers NATURAL FREQUENCY 7-28 Hertz TRANSMISSIBILITY AT RESONANCE 8:1 RESILIENT ELEMENT STANDARD MATERIALS Neoprene & Natural Rubber Low carbon steel Environmental Data Neoprene elastomer has an operating temperature range of -4 C to +93 C and is resistant to oils, most solvents and ozone. Natural Rubber elastomer has an operating temperature range of -3 C to +7 C. Other materials are available on special order to meet specific operating characteristics. 131
2 Cylindrical Stud Mounts: Double Stud (Male/Male) Series Dimensions A D Double Stud (Male/Male) Series Dimensional Drawing (Inches) B D C (Thread) Compression Shear Natural Natural Part # A B C D Max. Load Frequency Max. Load Frequency (lbs.) (Hz) (lbs.) (Hz) Material A # Natural Rubber A # Natural Rubber A # Natural Rubber A # Natural Rubber A # Natural Rubber A # Natural Rubber A # Natural Rubber A # Natural Rubber A # Natural Rubber A Natural Rubber A Natural Rubber A Neoprene A Natural Rubber A Natural Rubber A Neoprene A Neoprene A Natural Rubber A Neoprene A mm Natural Rubber A Natural Rubber A Natural Rubber A Neoprene A Neoprene A Neoprene A Natural Rubber A Neoprene A Natural Rubber Dimensions and data are subject to change without notice. 1-8-BARRY MA 4 Guest Street Brighton, MA (617) Fax (617)
3 A Load vs Deflection A Load vs Deflection IN IN Dimensions and data are subject to change without notice. 4 Guest Street Brighton, MA (617) Fax (617) BARRY MA 133
4 A Load vs Deflection A Load vs Deflection IN IN Dimensions and data are subject to change without notice. 1-8-BARRY MA 4 Guest Street Brighton, MA (617) Fax (617)
5 A Load vs Deflection A Load vs Deflection IN IN Dimensions and data are subject to change without notice. 4 Guest Street Brighton, MA (617) Fax (617) BARRY MA 135
6 A Load vs Deflection A Load vs Deflection IN IN Dimensions and data are subject to change without notice. 4 Guest Street Brighton, MA (617) Fax (617) BARRY MA 136
7 Double Stud (Male/Male) Series (G5-141) G5-141 CYLINDRICAL STUD MOUNT Dimensional Drawing 8 G5-141 Load vs Deflection IN Dimensions and data are subject to change without notice. 4 Guest Street Brighton, MA (617) Fax (617) BARRY MA 137
low frequency metal isolators standard line "Spring-Polycal" definition U V Ho G K L M E e F R J D d R P
low frequency metal isolators line "Spring-Polycal" definition E V K J e U G R Ho series RP3 All metal low frequencies antivibration mounts for vertical loading. Exceptional reliability and long life.
Elastic Support of Machinery and Equipment
Elastic Support of Machinery and Equipment Elastic Support of Machinery and Equipment Typical Spring Unit (Load Capacity 2 to 48 kn) Principle of Vibration Isolation The transmission of periodic or shocktype
Evaluation of Drywall Resilient Sound Isolation Clips. Dr. Peter D Antonio RPG Diffusor Systems, Inc. January 2010
Evaluation of Drywall Resilient Sound Isolation Clips by Dr. Peter D Antonio RPG Diffusor Systems, Inc. January 2010 TABLE OF CONTENTS 0 INTRODUCTION 1. THEORY 1.1 TRANSMISSIBILITY 1.2 Static stiffness
SAW. Typical fields of application are: Other very heavy Hoppers and feeders machines and. shear load. A K
DRÁUCA E PNEUMÁTCA www.magral.com.br - 11 1-2 SAW Features Novibra type SAW mountings consist of a cylindrical shaped rubber section with integrally bonded interleaf metal plates bonded to two square heavy
MINIATURE MOUNTS MAA SERIES, MGN/MGS SERIES, MCB SERIES STANDARDIZED SOLUTIONS FOR LIGHTWEIGHT ELECTRONIC EQUIPMENT
MAA SERIES, MGN/MGS SERIES, MCB SERIES STANDARDIZED SOLUTIONS FOR LIGHTWEIGHT ELECTRONIC EQUIPMENT The Miniature Mount Series offer standardized solutions drawn from broad experience in the design of space
MODEL 140 VIBRATION TRANSMITTER
OPERATION MANUAL MODEL 140 VIBRATION TRANSMITTER Includes 140-1, -2, -5, -X and 140-T-1, -2, -5, -X Page 2 MODEL 140 TABLE OF CONTENTS 1. INTRODUCTION... 3 Description... 3 2. FEATURES... 3 Piezoelectric
Principles of Vibration Measurement and Analysis. Dr. Colin Novak, P.Eng July 29, 2015
Principles of Vibration Measurement and Analysis Dr. Colin Novak, P.Eng. 92-315 July 29, 2015 Vibration Transducers and Signal Conditioning Types of Vibration Transducers The Piezoelectric Accelerometer
Vibration Transmitter
Vibration Transmitter Model ST5484E (formerly 8590) Typical applications Offers real-time on-line monitoring of machine vibration for: Compressors Engines Pumps Fan, blowers Key benefits Compatible vibration
Chapter 22: Turning and Boring Processes. DeGarmo s Materials and Processes in Manufacturing
Chapter 22: Turning and Boring Processes DeGarmo s Materials and Processes in Manufacturing 22.1 Introduction Turning is the process of machining external cylindrical and conical surfaces. Boring is a
Side. Channel Blower APEX DARGANG MACHINERY CORPORATION
Side Channel Blower APEX DARGANG MACHINERY CORPORATION Side Channel Blower Construction External bearing Cool-running Long life Motor Industrial quality /60Hz Squired-cage motor totally enclosed(ip55 )
Comparison of Transmissibility of Non-Metallic Materials For Vibration Isolation
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X PP. 57-61 www.iosrjournals.org Comparison of Transmissibility of Non-Metallic Materials For Vibration A.
MIL-STD-202G VIBRATION, HIGH FREQUENCY
VIBRATION, HIGH FREQUENCY 1. PURPOSE. The high frequency vibration test is performed for the purpose of determining the effect on component parts of vibration in the frequency ranges of 10 to 500 hertz
V8 Vibration Test Systems
V8 V8 Vibration Test Systems V8-440 Shaker system: configuration and performance parameters V8-440 Metric American Armature diameter 440 mm 17.3 in Sine force peak (stabilised) 57,827 N 13,000 lbf Sine
OPERATING MANUAL SHOCK TOOL OWS WENZEL DOWNHOLE TOOLS LTD.
OPERATING MANUAL SHOCK TOOL OWS WENZEL DOWNHOLE TOOLS LTD. Release Notes: Release 2 Issued May 2016 Document # OM ST 001, Shock Tool Operating Manual Reviewed By: RG 1 P age OPERATING MANUAL SHOCK TOOL
Introduction to LIVM Accelerometers
Introduction to LIVM Accelerometers Construction Low Impedance Voltage Mode (LIVM) accelerometers are designed to measure shock and vibration phenomena over a wide frequency range. They contain integral
Mounting Instructions
Mounting Instructions This technical note describes basic installation techniques for accelerometers and other vibration sensors. It will allow qualified field technicians to install vibration sensors
Letter of Transmittal/Submittal
Letter of Transmittal/Submittal FROM: TO: Baker Concrete Construction 1904 Jasper Street DATE JOB NUMBER 09/23/10 Aurora, CO 80011 9921 303.367.8111 ATTENTION Nick Dewald 937.536.9000 RE: Bruce Herman
Recoil KEYSERT Products
Recoil KEYSERT Products Solid Threaded Inserts,Tooling, & Kits Contents Description, Features, Typical Applications 1 Installation and Removal 1 Thinwall and Heavy Duty Inch Series Carbon Steel Bulk Inserts
26 Endevco Isotron accelerometers
Isotron accelerometers Typical applications > Aircraft flight testing > Ground vibration testing > Automotive ride quality testing > Product testing > Quality assurance > Research and development > Test
AGN 008 Vibration DESCRIPTION. Cummins Generator Technologies manufacture ac generators (alternators) to ensure compliance with BS 5000, Part 3.
Application Guidance Notes: Technical Information from Cummins Generator Technologies AGN 008 Vibration DESCRIPTION Cummins Generator Technologies manufacture ac generators (alternators) to ensure compliance
Load Cells Shear beam load cells SIWAREX WL230 SB-S SA
oad cell Overview Combined error comb Repeatability v ±0.0% C n ±0.0% C n The shear beam load cell is particularly suitable for implementation in container, overhead rail conveyor and platform scales.
AN5E Application Note
Metra utilizes for factory calibration a modern PC based calibration system. The calibration procedure is based on a transfer standard which is regularly sent to Physikalisch-Technische Bundesanstalt (PTB)
Dry-Type Transformers
Dry-Type Transformers 600 Volt Class Bulletin 7700-99 ISO 9002 Registered 1 Federal Pacific Federal Pacific History During 1987, the Electro-Mechanical Corporation acquired the dry-type transformer division
Industrial vibration sensor selection: Piezovelocity transducers
Industrial vibration sensor selection: Piezovelocity transducers In many industrial monitoring applications, piezovelocity transducers have distinct advantages over piezoelectric accelerometers and traditional
ST6911 IPT ACCELERATION VIBRATION TRANSDUCER ST6917 IPT VELOCITY VIBRATION TRANSDUCER Installation Manual
ST6911 IPT ACCELERATION VIBRATION TRANSDUCER IPT VELOCITY VIBRATION TRANSDUCER Installation Manual OVERVIEW Capable of sensing a wide range of vibration frequencies, the ST6911 and are ideal for a variety
SUBMITTAL INFORMATION "BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH
"BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH GRADE: LOW CARBON STEEL GRADE A GRADE B PHOSPHOROUS MAX % 0.06 0.04 SULFUR,
Dr Ghassan Al-Kindi - MECH2118 Lecture 9
Dr Ghassan Al-Kindi - MECH2118 Lecture 9 Machining A material removal process in which a sharp cutting tool is used to mechanically cut away material so that the desired part geometry remains Most common
IT6810/IT6811/IT6812 IMPACT TRANSMITTER Installation Manual
IT6810/IT6811/IT6812 IMPACT TRANSMITTER Installation Manual OVERVIEW IT6810 IT6811 The Model IT6810/IT6811/IT6812 Impact Transmitter uses new technology to measure impact severity on reciprocating machinery.
EVALUATION OF METHODS OF ASSEMBLING PALLETS RESEARCH PAPER FPL U. S. DEPARTMENT OF AGRICULTURE FOREST SERVICE FOREST PRODUCTS LABORATORY
EVALUATION OF METHODS OF ASSEMBLING PALLETS U. S. D. A. FOREST SERVICE RESEARCH PAPER FPL 213 1973 U. S. DEPARTMENT OF AGRICULTURE FOREST SERVICE FOREST PRODUCTS LABORATORY MADISON,WIS. ABSTRACT The performance
High Frequency/Precision Drives by Design
High Frequency/Precision Drives by Design SPINDEL Master is a line of universal high frequency drives, suited for operation of a wide range of phase AC motors, from standard low speed motors rated 50 or
YL SERIES RELAY LATCH DC COIL 4PDT, LOW LEVEL TO 5 AMP
Magnetic latch operation All weld construction Contact arrangement 4 PDT Qualified to MIL-PRF-6106 PRINCIPLE TECHNICAL CHARACTERISTICS Applicable sockets: SO-1066-001 SM-1002-003 Contacts rated at Low
High Temperature Velocity and Acceleration Sensor
359 High Temperature Velocity and Acceleration Sensor Bently Nevada* Asset Condition Monitoring Description The 359 High Temperature Velocity and Acceleration Sensor (HTVAS) provides a continuous acceleration
Motor Accessories ACCESSORIES. GE TECMate Pro Service Tool. 760-ECM Motor Speed Controller. Broad Ocean ECM Motor Tester (Digimotor Test Tool)
GENTEQ GENTEQ GE TECMate Pro Service Tool The Tecmate Pro Service Tool, stock #08500 is the latest advance in ECM technology developed by and for Genteq Motors. The Tecmate allows the service technician
28" Adjustable Solar Tilt Mount ADJ-28. Owner's Manual. Please read this manual BEFORE installing your solar tilt mount
28" Adjustable Solar Tilt Mount ADJ-28 Owner's Manual Please read this manual BEFORE installing your solar tilt mount SECTION 1 Introduction Mounting your solar panel inclined to an optimized angle with
Modus M Series. General Eastern Differential Pressure Transmitters. GE Sensing
The Modus M Series family of differential pressure transmitters measure low pressures, and feature a variety of analog signal outputs with low power consumption. A wide selection of standard pressure ranges
Clamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp
High Leverage Combination Pliers
Wiha Pliers & Cutters, professional quality at competitive prices. A wide selection covering most applications in which pliers & cutters are required. 64HRC Cutting Edges Wiha SoftGrip Pliers & Cutters
CARBIDE TIPPED RECIPS
CARBIDE TIPPED RECIPS CTRPRES 816 CTR CARBIDE TIPPED METAL CUTTING RECIPS THE BEST CHOICE FOR THICK METAL CUTTING APPLICATIONS BETWEEN 3/16" AND 1/2". THIS HIGH PERFORMANCE BLADE PROVIDES LONGER CUTTING
AEROSPACE & DEFENSE ISOLATOR CATALOG. Vibration, Shock & Motion Control Products. For Sensitive Equipment, Shipping Containers & Aircraft Interiors
AEROSPACE & DEFENSE ISOLATOR CATALOG Vibration, Shock & Motion Control Products For Sensitive Equipment, Shipping Containers & Aircraft Interiors LORD CORPORATION CAN HELP YOU SOLVE CONTROL PROBLEMS IN
Industrial vibration sensor selection: piezovelocity transducers
Industrial vibration sensor selection: piezovelocity transducers In many industrial monitoring applications, piezovelocity transducers have distinct advantages over piezoelectric accelerometers and traditional
Description & Applications Questions & Answers Selection Charts Single Phase Selection Charts Three Phase...
SECTION BUCK-BOOST TRANSFORMERS A simple and economical way to correct offstandard voltages... from 95 to 500 volts; single and three phase, in sizes up to 60 kva. Simplified buck-boost rating charts make
SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
UBC Technical Guidelines Section Edition Medium-Voltage Transformers Page 1 of 5
Page 1 of 5 1.0 GENERAL 1.1 Coordination Requirements.1 UBC Energy & Water Services.2 UBC Building Operations 1.2 Description.1 UBC requirements for Substation Transformers. 2.0 MATERIAL AND DESIGN REQUIREMENTS
TECH SHEET PEM - REF / TESTING CLINCH PERFORMANCE. SUBJECT: Testing clinch performance of self-clinching fasteners.
PEM - REF / TESTING CLINCH PERFORMANCE SUBJECT: Testing clinch performance of self-clinching fasteners. A self-clinching fastener s performance can be divided into two major types. The first is self-clinching
Options & Accessories
75 mm (2.95-inch) BLDC Motor with Integrated Sensorless Digital Drive Allied Motion s Gen III EnduraMax 75s series motors are 75 mm (2.95 in) diameter brushless DC motors that incorporate integrated drive
Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
ENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:
ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog
BUCK-BOOST TRANSFORMERS
Where Are Buck-Boost Transformers Used? A typical buck-boost application is 120 volts in, 12 volts out for low voltage lighting or control circuitry. In most applications, this low voltage transformer
Model 526T Series II Super Punch Microphone User Guide
TRANSISTORIZED BASE STATION MICROPHONE Model 526T Series II Super Punch Microphone User Guide Replaces either ceramic or dynamic original equipment microphones Excellent response for single-sideband transmission
AF-4 Grooved Flange Adapter
SUBMITTAL INFORMATION PROJECT NAME: ENGINEER: CONTRACTOR: SPEC. SECTION: MEMBER FEATURES & ADVANTAGES Designed for connecting ANSI/AWWA C110/A21.10 and ASME/ANSI B16.1 Class 125/ flanged end components
Electromagnetic shakers operating guide Models F3, F4, F5B, F10
Electromagnetic shakers operating guide Models F3, F4, F5B, F10 Caution: This manual should be read carefully before installation WARNING: OPERATION OF THE ELECTROMAGNETIC SHAKER IS SAFE WHEN THE INSTRUCTIONS
Type 297, High-Voltage Mica Capacitors Corona-free Mica Coupling Capacitors for Medium-Voltage PDA s
Designed for Partial Discharge Analyzers (PDA s) monitoring rotating machinery or other medium-voltage equipment from 1 to 35 kvac RMS at power-line frequencies of 10 Hz to 1 khz, Mica Capacitor Type 297
RATCHET CABLE CUTTER
OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 764 RATCHET CABLE CUTTER Read and understand this material before operating or servicing this equipment. Failure to understand how to safely operate this
Vibration Testing Products
Vibration Testing Products Catalog and Technical Reference Shakers Amplifiers Controllers Instrumentation Labworks Inc. Catalog 180 Catalog 178 Call us or visit www.labworks-inc.com for more information
T3ss Gas Powered Tool
T3ss Gas Powered Tool Gas Technology Single Pin Gas Tool Fuel Injection Cross Over Technology /SUGGESTED SPECIFICATIONS Crossing Over from Powder to Gas THE PREMIER FASTENING SYSTEM FOR THE ELECTRICAL
INSTRUCTION MANUAL VIBRATION SWITCH CVS 100 LC
INSTRUCTION MANUAL VIBRATION SWITCH Meggitt GmbH Kaiserleistraße 51 63067 Offenbach am Main Deutschland / Germany Tel.: +49 69 97 99 05-0 Fax: +49 69 97 99 05-26 E-Mail: Web: info@meggitt.de www.meggitt.de
Systems. Dynamic Test. Electrodynamic Vibration Test Systems
Systems 6-20 kn air cooled Electrodynamic Vibration Test Systems SW2-6200APP ( 6KN) SW2-6230APP ( 6KN) SW2-1240APP (10KN) SW2-2320APP (20KN) SW2-2LS3-340APP (20KN) Dynamic Test Technical subject to changes
Bico, Inc Valhalla Drive, Burbank, CA Tel. (818) Fax (818) BICO UD DIRECT DRIVEN PULVERIZER
BICO UD DIRECT DRIVEN PULVERIZER The Bico Direct Driven UD Pulverizer is a high quality laboratory apparatus. It is one of the lines of BICO Pulverizers that have earned an enviable reputation in assay,
DESIGN AND FABRICATION OF GRINDING ATTACHMENT FOR LATHE MACHINE TOOL
DESIGN AND FABRICATION OF GRINDING ATTACHMENT FOR LATHE MACHINE TOOL Pratik Chavan 1, Sanket Desale 2, Ninad Kantela 3, Priyanka Thanage 4 Prasad Bari 5 1,2,3,4 B.E. Students, Fr. C Rodrigues Institute
OPERATING GUIDE MODEL 3093M32 MINIATURE HIGH SENSITIVITY TRIAXIAL LIVM ACCELEROMETER WITH SINGLE 4-PIN CONNECTOR INTERNALLY CASE GROUND ISOLATED
Dytran Instruments, Inc. 21592 Marilla St. Chatsworth, CA 91311 Ph: 818-700-7818 Fax: 818-700-7880 www.dytran.com email: info@dytran.com OG3093M32.docx OPERATING GUIDE MODEL 3093M32 MINIATURE HIGH SENSITIVITY
Options & Accessories
75 mm (2.95-inch) BLDC Motor with Integrated Sensorless Digital Drive Allied Motion s Gen III EnduraMax 75s series motors are 75 mm (2.95 in) diameter brushless DC motors that incorporate integrated drive
PIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
CLASS 200 EQUIPMENT EXCITATION SUPPORT SYSTEM
CLASS 200 EQUIPMENT EXCITATION SUPPORT SYSTEM APPLICATION: Many brushless exciter-equipped generators are required to sustain the substantial current overloads associated with starting large motors. Typically,
THE USE OF BU SERIES ACCELEROMETERS
TECHNICAL BULLETIN TB-26 THE USE OF BU SERIES ACCELEROMETERS These notes are intended as a guide to the use of BU series accelerometers and not as a substitute for BU model specifications. OVERVIEW The
MATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification.
Cast Iron Slide Gates Spec Sheet General The contractor shall furnish and install the following cast iron slide gate assemblies as listed on the Gate Schedule and detailed on the manufacturer s drawings.
Sensor selection guide
Sensor selection guide Global competition and pressure on corporate performance makes productivity a primary concern for any business. Machinery vibration monitoring programs are effective in reducing
Rhino Packing Gland Tool
Instruction Sheet P/N Rhino Packing Gland Tool 1. Description See Figure 1. The Rhino packing gland tool is used to remove the packing gland from Rhino bulk unloader pumps. The tool consists of two components,
ROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
AC AC AC
AC104.01-10 AC104.01-100 AC104.01-500 Description The hermetic sealed industrial piezoelectric accelerometer model 104 is design to monitor the vibration in harsh industrial environment. It uses the industry
JARVIS. Model BR-3 Blade Reconditioner ... EQUIPMENT TABLE OF
- Model BR-3 Blade Reconditioner EQUIPMENT SELECTION.......... Ordering No. TABLE OF CONTENTS............................ Page Model BR-3 (100 mm Blade) 115V/60Hz............ 4011003 220V/50Hz............
High Vibration Analysis of Eddy Current Drum Coupled Motor to a Vertical Centrifugal Pump Solution Based on EMA, ODS and FEA By:
Juan Gamarra Mechanical Solutions, Inc. High Vibration Analysis of Eddy Current Drum Coupled Motor to a Vertical Centrifugal Pump Solution Based on EMA, ODS a FEA By: Jody Barksdale, PE Juan R. Oqueo,
SKODA LIVE CENTERS. Skoda & Sowa Heavy Duty Live Centers - CSN PARTS FOR HEAVY DUTY LIVE CENTERS. Parts For Heavy Duty Live Centres
Skoda & Sowa Heavy Duty Live Centers - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two specially designed adjustable needle-roller bearings carry all radial loads
Wedge Type Anchors. Trubolt. Wedge Anchor ADVANTAGES
CONCRETE ANCHORING SPECIALISTS Dependable, Heavy-Duty, Inspectable, Wedge Type Expansion Anch 2015 IBC Compliant DESCRIPTION/SUGGESTED SPECIFICATIONS Wedge Type Anchs SPECIFIED FOR ANCHORAGE INTO CONCRETE
Dytran Instruments, Inc. 1
Dytran Instruments, Inc. 1 Installed HUMS Base Dytran sensors are installed on the following airframes for HUMS applications Dytran Instruments, Inc. 2 MH60 Blackhawk A119 AS350 Bell 412 AH-64 MH47 Introduction
Hang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
85HF(R) SERIES 85 A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics
85HF(R) SERIES STANDARD RECOVERY DIODES Stud Version Features High surge current capability Stud cathode and stud anode version Leaded version available 85 A Types up to 1600V V RRM Typical Applications
Proximity Transmitters and Seismic Vibration Transmitters
TM016 Velocity/ Acceleration Vibration Transmitter Introduction The TM016 is a solid state loop powered transmitter which provides a 4-20mA output proportional to the machine case vibration level. The
The Redi-Flange Method. How It Works. Services. Engineering & Costing Assistance
... g n ldi ng... e i W No hread ing! T oov o N Gr o N The Redi-Flange Method Redi-Flange is a method of joining valves, fi ttings and equipment with integral fl anged ends to plain-ended pipe, with all
JOYCE Interactive 3D Modeling
JOYCE Interactive 3D Modeling Reduce design costs, accelerate time to market, and ensure the accuracy of your designs. With Joyce's interactive 3D modeling you can now configure, view online and download
Phone: Fax: Web: -
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
Captive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED
Solutions Inc. PA-3500 Line Captive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED The DFCI PA-3500 Line of fasteners combine the operating convenience, predictable clamping
TK 1014 A POWER SHEAR
TIN KNOCKER TK 1014 A POWER SHEAR Parts Diagram & Operating Instructions TAAG INDUSTRIES CORP. 1550 SIMPSON WAY, ESCONDIDO, CA 92029 Tel: (800) 640-0746 Fax: (760) 727-9948 Website: www.tinknocker.com
Fixture Holes Explanation
Fixture Holes Explanation Figure 1. General description of a wire rope isolator and its components A wire rope isolator (WRI) has a simple design composed of the following components: wire rope steel cable,
POWER-Skru Large Diameter Concrete Screw
POWER-Skru Large Diameter Concrete Screw Description The POWER-Skru Large Diameter Concrete Screw is a highstrength screw anchor with self-tapping threads that offer a unique undercutting design for anchoring
Section 7 - Measurement of Transient Pressure Pulses
Section 7 - Measurement of Transient Pressure Pulses Special problems are encountered in transient pressure pulse measurement, which place stringent requirements on the measuring system. Some of these
Umbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7+ Adhesive Umbrella Inserts
General Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
SECTION LOW PRESSURE DUCTWORK
SECTION 15841 LOW PRESSURE DUCTWORK PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 07270 - Firestopping and Fire and Smoke Barrier Caulking. 2. 15260 - Vibration Isolation. 3. 15280 - Thermal Insulation
FUNDAMENTAL MANUFACTURING PROCESSES Plastics Machining & Assembly NARRATION (VO): NARRATION (VO): NARRATION (VO): INCLUDING: METALS,
Copyright 2002 Society of Manufacturing Engineers --- 1 --- FUNDAMENTAL MANUFACTURING PROCESSES Plastics Machining & Assembly SCENE 1. CG: Plastics Machining white text centered on black SCENE 2. tape
Root Cause Failure Analysis In Rotating Machinery
Root Cause Failure Analysis In Rotating Machinery -Causes & Avoidance- A must course to understand the process of machinery failures, help with the job and add value to the business Abu Dhabi 16 20 March
Load application in load cells - Tips for users
Load application in load cells - Tips for users Correct load application on the load cells is a prerequisite for precise weighing results. Be it load direction, support structure or mounting aids load
INTER PLANT STANDARD STEEL INDUSTRY
INTER PLANT STANDARD STEEL INDUSTRY IPSS SPECIFICATION FOR VIBRATION MEASURING SYSTEM FOR LOW SPEED MACHINES (Second Revision) Corresponding IS does not exist IPSS:2-07-027-11 Formerly: IPSS:2-07-027-97
CPT SS-MI TABLE OF CONTENTS. Pass Thru Brochure Pass Thru Drawing. Pgs. 2-3 Pg. 4
CPT3648-54-SS-MI TABLE OF CONTENTS 1) 2) 3) Pass Thru Brochure Pass Thru Drawing Installation & Parts List Latch Info Spring Info Hinge Info Spring Info Halco Warranty Pgs. 2-3 Pg. 4 Pg. 6 Pgs. 7-8 Pg.
Umbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and Stubby Screens High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7 Adhesive
Shear beam With thin-film technology from 2 kn Models F3301, F33C1, F33S1
Force Shear beam With thin-film technology from 2 kn Models F3301, F33C1, F33S1 Rated force From 0...2 kn Applications Industrial weighing technology Machine building and plant construction, manufacturing
Sensors for Vibration, Acceleration, and Shock Measurement. Product Catalog
Sensors for Vibration, Acceleration, and Shock Measurement Product Catalog Company Overview VISONG TEST is a Sino-US joint venture specialized in the field of vibration transducer and dynamic measurement
case styles accessories
87 case styles Audio-Technica offers a wide array of professional windscreens, clamps, shock mounts, adapters and other audio designed to fit A-T microphones. Many are provided as included ; both included
4-20 ma Vibration Transmitter, Top connector
4-20 ma Vibration Transmitter, Top connector Main Characteristics Atex Approved for zone 0, 1, 2. Can monitor machine as low as 180 RPM. Annular shear mode (better than obsolete compression design) Velocity
Features. Continuous Duty Cycle Actuators
Features Predictable life. Continuous operation. Oil lubricated. High mechanical and thermal efficiency 2 models available. Capacity 3,500 to 27,000 pounds Available with C-Face motor adaptors and speed
4) Drive Mechanisms. Techno_Isel H830 Catalog
4) Drive Mechanisms This section will introduce most of the more common types of drive mechanisms found in linear motion machinery. Ideally, a drive system should not support any loads, with all the loads