3D Christmas Tree. C 2010 Jennifer Williams

Size: px

Start display at page:

Download "3D Christmas Tree. C 2010 Jennifer Williams"

Adam Bruno Thornton
6 years ago
Views:

hristmas Tree This tree is worked in layers decreasing in size to give the tree its shape. Where two layers are worked to the same pattern, take care because the stitch count is different.

1 hristmas Tree This tree is worked in layers decreasing in size to give the tree its shape. Where two layers are worked to the same pattern, take care because the stitch count is different. The layers should be allowed to frill on the edges. equirements: Size 0 green thread for the tree, red for the pot and gold (or yellow) for the star. 1 th 16 inch dowelling, spacers with the hole the size of the dowelling (e.g. 5 mm th Sunburst rystal by 'The eanery'. f you work the optional 6 layer you will need an extra spacer such as a 'Hama' or similar bead which will fit onto the wooden pot about 5 8 inch high and 5 dowelling. 8 inch diameter (15 mm high 15 mm diameter). small disc of wood, or a mirror for the tree to stand on. Suitable glue such as an all purpose gel adhesive made by UHU. ll of the above, except for the tatting thread, can be purchased from branches of Hobbycraft or dolls house suppliers. ottom layer Wind about 1 metre on your shuttle. o not cut. 5, p,, p, 5, cl, W H, p,, p,, W *. 5, + to picot on previous ring,, p, 5, cl, W H, p,, p,, W epeat from * three times more. 5, + to previous ring,, + to free picot on ring, 5, cl, W H, p,, p,, 5 5 ut and tie to the base of ring. Secure ends ow 010 ennifer Williams Wind about metres on your shuttle. o not cut ig 1., p,, + to the picot on the chain to the left of a ring on 1 st row (see diagram), 5, p,, p,, cl, W ig H, (p,,) x 7, W ig 1 ig ig ig H 5 5 H ig.h, p,, + to the last but one picot on ring (see diagram), 5, + to the picot on the next chain on1 st row,, p,, cl, W ig H, (p,,) x, W 68

epeat from ring five times more to complete the row. ote that the rings are worked in groups of two, but that each group is not joined to the previous one.

, p,, p,, cl, W H, p,, p,, W *., + to picot on previous ring,, p,, cl, W H, p,, p,, W epeat from * three times more.

2 epeat from ring five times more to complete the row. ote that the rings are worked in groups of two, but that each group is not joined to the previous one. 5 5 H ayer two Take care because even though the pattern looks similar, the stitch count is different from the bottom layer. Wind about 1 metre on your shuttle. o not cut., p,, p,, cl, W H, p,, p,, W *., + to picot on previous ring,, p,, cl, W H, p,, p,, W epeat from * three times more., + to previous ring,, + to free picot on ring,, cl, W H, p,, p,, ut and tie to the base of ring. Secure ends ow Wind about metres on your shuttle. o not cut., p,, + to the picot on the chain to the left of a ring on 1 st row (see diagram),, p,, p,, cl, W H, (p,,) x 7, W.H, p,, + to the last but one picot on ring (see diagram),, + to the picot on the next chain on1 st row,, p,, cl, W H, (p,,) x, W epeat from ring five times more to complete the row. ote that the rings are worked in groups of two, but that each group is not joined to the previous one. H 69

ayer three Wind about 1 metre on your shuttle. o not cut., vsp,, cl ST so that the threads change places to work a chain outside the first stitches of the ring H, p,, p,, sj to vsp on the ring *.

3 ayer three Wind about 1 metre on your shuttle. o not cut., vsp,, cl ST so that the threads change places to work a chain outside the first stitches of the ring H, p,, p,, sj to vsp on the ring *., vsp,, cl. Take the shuttle thread behind the ring just worked, ready to work the chain on the outside of the ring H, p,, p,, sj to vsp on the ring epeat from * times more then cut and tie to the start of ring ow Wind about metres on your shuttle. o not cut *., p,, + to the right hand picot on one of the chains on 1 st row (see diagram),, p,, p,, cl, W H, (p,,) x 6, W.H, p,, + to the last but one picot on ring (see diagram),, + to the picot on the next chain on1 st row,, p,, cl, W H, (p,,) x, W epeat from * five times more ut and tie to the base of the first ring on the row. H H 70

ow Wind about metres on your shuttle. o not cut.., + to the picot on one of the rings of 1 st row see diagram below,, p,, cl, W H, (p,,) x 5, W.

4 ayer Wind about 1 metre on your shuttle., sp,, sp,, vsp,, cl, W Take the thread behind ring and work a shuttle join into the vsp 8., sp,, sp,, vsp,, cl, W Take the thread behind the ring and work a shuttle join into the vsp epeat ring four times more. ut and tie to the start of ring. Secure the ends. ow Wind about metres on your shuttle. o not cut.., + to the picot on one of the rings of 1 st row see diagram below,, p,, cl, W H, (p,,) x 5, W.H st, + to picot on previous ring,, + to the 1 picot on the next ring of 1 st row, see diagram,, cl, W H, (p, ) twice H epeat from ring five times more ut and tie to the base of ring. Secure ends. H ayer 5 Wind shuttles T with about metres on shuttle 1 and metres on shuttle Two shuttles are needed to work the split ring at the start of row. fter that use shuttle 1 as a ball of thread....\ hristmas Tree... SH 1 S., (vsp, ) x 5, cl 71

ow ake a false picot by leaving a space on both threads to match the size of the very small picots on the S, then tie a reef knot. SH. S., vsp,, p, /, cl, W, H, (p, ) x 5, sj to vsp on S, W *.

Secure ends ayer 6 (optional) Wind about ½ metre on your shuttle.o not cut.

Shape by bringing alternate chains above the others as in the picture. ot for the ittle hristmas Tree Wind about 1½ metres onto your shuttle. o not cut.., p,, p,, p,, cl, W H 8, W *.

5 ow ake a false picot by leaving a space on both threads to match the size of the very small picots on the S, then tie a reef knot. SH. S., vsp,, p, /, cl, W, H, (p, ) x 5, sj to vsp on S, W *., + to next picot on S,, vsp,, p,, cl, W H, (p, ) x 5, sj to vsp on ring just worked, W epeat from * four times more. ut and tie to the start of the 1 st chain. Secure ends ayer 6 (optional) Wind about ½ metre on your shuttle.o not cut. S, (sp, ) x 5, cl H, (p, ) x, sj to 1 st sp on S *H, (p, ) x, sj to next sp on S epeat from * times more, making the final shuttle join to the start of the 1 st chain. Shape by bringing alternate chains above the others as in the picture. ot for the ittle hristmas Tree Wind about 1½ metres onto your shuttle. o not cut.., p,, p,, p,, cl, W H 8, W *., + to previous ring,, p,, p,, cl, W H 8, W epeat from * four times more., + to ring '',, p,, + to ring '',, cl H. 8, cut and tie to the base of ring ''. Secure ends. ow Wind about 18 inches (5 cm) onto your shuttle. o not cut. Work a shuttle join to a free picot on one of the rings on the 1 st row. *H, p,, p,, p,, sj to the picot on the next ring epeat from * five times more ut and secure ends. 8 ittle Star - make Wind about ½ metre of your chosen thread onto your shuttle. o not cut. or S, vsp,, vsp,, vsp,, vsp,, cl, H 6, p, 6, sj to 1 st vsp on the ring *H 6, p, 6, sj to next vsp on the ring epeat from * three times more. ut and secure the ends To assemble your tree: ut a length of dowelling about ¼ inches (8 5 cm) long. ill the wooden pot with glue then push the dowelling into it and support it until it dries. lue the pot to the centre of the small mirror or wooden disc Start here 7

ontinue layering the tatting and Sunburst rystal spacers alternately adding glue between each. f you have worked the sixth layer then use the larger bead or Hama bead between the 5 th and 6 th layers.

6 Slip the pot cover over the pot and, if necessary, add a little glue to hold it in place. ine up the layers of the tree in order. ut some glue on the top of the pot then slip the largest layer over the dowelling. dd more glue then one of the Sunburst rystal spacers. ontinue layering the tatting and Sunburst rystal spacers alternately adding glue between each. f you have worked the sixth layer then use the larger bead or Hama bead between the 5 th and 6 th layers. ut the dowelling to approximately ½ inch (1 cm) above the top layer of the tree then glue one of the stars in place so that its centre is about level with the end of the dowelling; then glue the second star on the opposite side of the dowelling so that it matches the first star. ress them together so that they cover the cut end of the dowelling and allow to dry. hristmas Tree with beads 010 ennifer Williams This version of the hristmas Tree has very small (size 15) beads in place of the picots. t is important that the beads are very small because the tatting will not support larger ones. There are six layers, decreasing in size. Where two layers are worked to the same pattern take care because the stitch count is different. ll the beads are added from the ball or shuttle threads. The layers can be blocked to flatten them or they can be allowed to 'frill' on the edges. equirements: Size 0 thread in white or green thread for the tree, red for the pot and gold (or yellow) thread for the star. Size 15 beads. 1 th 16 inch dowelling, spacers with the hole the size of the dowelling (e.g. 5 mm Sunburst th rystal by 'The eadery'). f working the optional 6 layer you will need an extra spacer such as a 'Hama' or similar bead which will fit onto the dowelling. wooden pot about 5 8 inch high and 5 8 inch diameter r (15 mm high and 15 mm diameter). small disc of wood, or a mirror for the tree to stand on. Suitable glue such as an all purpose gel adhesive made by UHU. ll of the above, except for the tatting thread, can be purchased from branches of Hobbycraft or dolls house suppliers. ottom layer Wind about 1 metre on your shuttle. o not cut. 5, p,, p, 5, cl, W H, p,, p,, W *. 5, + to picot on previous ring,, p, 5, cl, W H, p,, p,, W epeat from * three times more. 5, + to previous ring,, + to free picot on ring, 5, cl, W H, p,, p,, ut and tie to the base of ring. Secure ends 5 5 7

7 ow String 96 beads then wind about metres, with of the beads, on your shuttle. o not cut ig 1. bring beads into the ring round your hand then work,,, + to the picot on the chain to the left of a ring on 1 st row (see diagram), 5, p,,,, cl, W ig H, (,,) x,,, (,,) twice,, W ig 1 ig ig ig H 5 5 H ig.h bring beads into the ring round your hand then work,,, + to the last but one picot on ring (see diagram), 5, + to the picot on the next chain on1 st row,,,, cl, W ig H, (,,) x, W epeat from ring five times more to complete the row. ote that the rings are worked in groups of two but that each group is not joined to the previous one. 5 5 H ayer two Take care because even though the pattern looks the same, the stitch count is different from the bottom layer Wind about 1 metre on your shuttle. o not cut., p,, p,, cl, W H, p,, p,, W *., + to picot on previous ring,, p,, cl, W H, p,, p,, W epeat from * three times more., + to previous ring,, + to free picot on ring,, cl, W H, p,, p,, ut and tie to the base of ring. Secure ends ow String 96 beads then wind about metres, with of the beads, on your shuttle. o not cut. bring beads into the ring round your hand then work,,, + to the picot on the chain to the left of a ring on 1 st row (see diagram),, p,,,, cl, W H.H H, (,,) x,,, (,,) twice,, W bring beads into the ring round your hand then work,,, + to the last but one picot on ring (see diagram),, + to the picot on the next chain on 1 st row,,,, cl, W, (,,) x, W 7

8 epeat from ring five times more to complete the row. ote that the rings are worked in groups of two, but that each group is not joined to the previous one. H ayer three Wind about 1 metre on your shuttle. o not cut., vsp,, cl ST so that the threads change places to work a chain outside the first stitches of the ring H, p,, p,, sj to vsp on the ring *., vsp,, cl. Take the shuttle thread behind the ring just worked ready to work the chain on the outside of the ring H, p,, p,, sj to vsp on the ring epeat from * times more then cut and tie to the start of ring ow String 8 beads then wind about metres on your shuttle, with of the beads. o not cut *. bring beads into the ring round your hand and work,,, + to the right hand picot on one of the chains on 1 st row (see diagram),, p,,,, cl, W H, (,,) twice,,,,,,, W.H bring beads into the ring round your hand and work,,, + to the last but one picot on ring (see diagram),, + to the picot on the next chain on1 st row,,,, cl, W H, (,,) x, W H epeat from * five times more ut and tie to the base of the first ring on the row. H 75

ayer Wind about 1 metre on your shuttle ing, sp,, sp,,vsp,, cl, W, take the thread behind the ring and work a shuttle join into the vsp Work 5 more rings as above.

., + to the picot on one of the rings of 1 st row see diagram,, p,, cl, W H, (,,) twice,,, (, ) twice, W.

9 ayer Wind about 1 metre on your shuttle ing, sp,, sp,,vsp,, cl, W, take the thread behind the ring and work a shuttle join into the vsp Work 5 more rings as above. ut and tie to the start of the first ring to form a circle of rings. Secure the ends. ow String 5 beads then wind about metres on your shuttle leaving the beads on the ball thread. o not cut.., + to the picot on one of the rings of 1 st row see diagram,, p,, cl, W H, (,,) twice,,, (, ) twice, W.H, + to picot on previous ring,, + to the1st picot on the next ring of 1 st row see diagram,, cl, W H, (, ) twice epeat from ring five times more ut and tie to the base of ring. Secure ends. H H ayer 5 String 8 beads then wind shuttles T with about metres and beads on shuttle 1 and metres with 6 beads on shuttle Two shuttles are needed to work the split ring at the start of row. fter that use shuttle as a ball of thread. SH 1 S., (vsp, ) x 5, cl ow ake a false picot by leaving a space on both threads to match the size of the very small picots on thes then tie a reef knot. SH. S. bring a bead into the ring round your hand and work, vsp,,, /, cl, W H, (, ) twice,,, (, ) twice sj to vsp on S, W *. bring a bead into the ring round your hand and work, + to next picot on S,, vsp,,,, cl, W H, (, ) twice,,, (, ) twice sj to vsp on ring just worked, W epeat from * four times more. ut and tie to the start of the 1 st chain. Secure ends 76

ayer 6 (optional) String 0 beads and wind about ½ metre on your shuttle. eave the beads on the ball thread. o not cut.

Shape by bringing alternate chains above the others as in the picture. ot Wind about 1½ metres onto your shuttle. o not cut.., p,, p,, p,, cl, W H 8, W *.

ow String 0 beads then wind about 18 inches (5 cm) onto your shuttle.o not cut. eave the beads on the ball thread. Work a shuttle join to a free picot on one of th e rings on the 1 st row.

10 ayer 6 (optional) String 0 beads and wind about ½ metre on your shuttle. eave the beads on the ball thread. o not cut. S, (sp, ) x 5, cl H,,,,,,, sj to 1 st sp on S *H,,,,,,, sj to next sp on S epeat from * times more making the final shuttle join to the start of the 1 st chain. Shape by bringing alternate chains above the others as in the picture. ot Wind about 1½ metres onto your shuttle. o not cut.., p,, p,, p,, cl, W H 8, W *., + to previous ring,, p,, p,, cl, W H 8, W epeat from * four times more., + to ring '',, p,, + to. ring '',, cl H. 8, cut and tie to the base of ring ''. Secure ends. ow String 0 beads then wind about 18 inches (5 cm) onto your shuttle.o not cut. eave the beads on the ball thread. Work a shuttle join to a free picot on one of th e rings on the 1 st row. *H,,,,,,, sj to the picot on the next ring epeat from * five times more. ut and secure ends. 8 ittle Star make String 15 beads and wind about ½ metre of your chosen thread onto your shuttle. o not cut. or S, vsp,, vsp,, vsp,, vsp,, cl, H,,, sj to 1 st vsp on the ring *H,,, sj to next vsp on the ring epeat from * three times more. ut and secure the ends Start here To assemble your tree: ut a length of dowelling about ¼ inches (8 5 cm) long. ill the wooden pot with glue then push the dowelling into it and support it until it dries. lue the pot to the centre of the small mirror or wooden disc. Slip the pot cover over the pot and, if necessary, add a little glue to hold it in place. ine up the layers of the tree in order. ut some glue on the top of the pot then slip the largest layer over the dowelling. dd more glue then one of the Sunburst rystal spacers. ontinue layering the tatting and Sunburst rystal spacers alternately adding glue between each. f you have worked the sixth layer then use the larger bead or Hama bead between the 5 th and 6 th layers. ut the dowelling to approximately ½ inch (1 cm) above the top layer of the tree then glue one of the stars in place so that its centre is about level with the end of the dowelling; then glue the second star on the opposite side of the dowelling so that it matches the first star. ress them together so that they cover the cut end of the dowelling, and allow to dry. 77

3D Snowman A B C D. Jennifer Williams 2009

3D Snowman A B C D. Jennifer Williams 2009 Snowman Jennifer Williams 2009 Requirements:- white, black, red and brown size 20 cotton, 0 black beads size 9 or, 2 orange bugle beads, matching orange size 9/ bead, lollypop stick picot gauge and a inch