Materials Package A ratio (1:2) wood grain 1p ratio (1:1) wood 1p ratio (1:1) wood grain 1p ratio (1:1) wood grain (brown) 1p ratio (1:1) wood 1p rati

Transcription

1

2 Materials Package A (brown) brown 6ps grain(brown) unit 2 ps (brown) (brown) round 3ps round 8ps (brown) unit Materials Package A (brown) 4ps (brown) (brown)

3 Materials Package A (brown unit Materials Package B tube beads(blue) Colored paper(brown) ratio (1:3) ratio (1:3) ratio (1:3) grain(white) ratio (1:3) 20ps unit bead (brilliant white) bead (gold) net cloth(white) net cloth (yellow) bead (orange) 3ps bead (red) bead (red) tube bead (yellow) floral cloth(red and white) floral cloth(blue and white) metal bead (transparent color) light (white) 3ps paper rope(brown) wire (gold)

4 metal wire black length 70 Materials Package A beaded(red) seaweed(green) beaded(yellow) 1.take out A02~A05, stick B22 into part1 as shown 2.Cut 0.3 *1.3cm from B01 total of three, 0.8*1cm from B02 and stick 0.8*1cm to A05 as shown 0.8*1cm turn over seaweed(yellow-green) dried flower(green) dried flower (dark green) big dried flower (dark green) B01 ( 0.3*1.3cm) stick into a wave 3.take out A12~A16 and stick it into part2 as shown big dried flower (dark green) dried flower ( green) stone (mud yellow) interior wall main part 1 of the cabin side voice control chip main part 2 of cabin glass ball sticker (white) sandpaper(brown) 4.take out A06~A06,stick part 1 and part2 into part3 as shown water-soluble glue hemp rope interior wall the main part 2 of the cabin s to the inner wall plaid cloth (green and white) printed pape plan main part 1 of the cabin main part 3 of the cabin

5 First floor furniture 1.take out A22,A23, and stick them to total of two stairs as shown 2. take out A25,A26,B04,B05,B22,and stick them into a table 3. 1,5*1.5cm from B03,make a carpet 4.stick A24 into table and chairs as shown 5.take out A08~A11 and stick them as shown 0.8*1cm inner wall 2 stairs table 5. take out A25,A27,B06,B07,B7,make a high platform as shown 6.take out A28,B09,B10,B11,and stick them into a high cabinet 7. take out B06,B24, and make potted plants as shown *1.7 cm from B01,stick into wave shape with A17,A18 7. two pieces 1*1.3cm and, 0.3*1.3cm from B01, stick them toa20,note the difference between left and right and stick with A21 8. stick the parts as shown, finally stick into part 4 with A19 as shown high platform high cabinet first floor potted plants pay attention to the direction of paper stripe 1. take out A31,A32,A33,A34, a piece of 0.7*1.4cm from A34, two pieces of 0.8*1cm from B02, stick them as shown 2. take out A10,A35,A36, and stick them as shown 3.take out A10,A31; 0.3cm from B16 and split it to rope,stick as shown 4.take out A29 and stick into part 5 as shown inner wall main part 4 of the cabin split to rope and a piece of 0.3cm side

6 1.take out A45,A10;stick as shown 2.take out A46,A47; 0.3*1.7cm form B02,stick as shown *1.7cm from B01,stick with A50;note the stripe direction,and stick with A51 main part 5 of the cabin main part 5 of the cabin,plan Second Floor Furniture *2.6cm from B01,stick with A *1cm from B14,Use glue to fold and paste B1 like a circle,use the scissors to off the B14 on both sides of the gray part, and then glue edge bit glue clamps to pinch the pillow, pillow finished 2.take out A38,A39; 0.9*1.3cm from B13, 1*1.5cm from B33,stick as shown 3.stick A41,A42 as shown 4.take out B06,B26; stick into bonsai as shown 5.take out B08,B22,B26;stick to a vase as shown a total of two *1cm from B02, 0.3*1.3cm from B01,stick with A10,A32,A34 as shown glue to the rim bed 6.take out A43,A44, stick as shown bonsai on the second floor nightstand plan side

7 Install the cabin Main body of the cabin 7.take out A15,A42,A49, stick them as shown; take out B12 and lead the wire from the A43 hole,the main part6 of the cabin finished 5.take out A30 and sick as shown 6.Refer to the floor plan and detail drawing to put the furniture in place (single strand rope) (single strand rope) (single strand rope) main part 6 of the cabin (single strand rope) note to separate the positive and negative pole of the lamp, stick the interface with B30 to prevent the leakage of the wire Install the Cabin 1.take out B12 and stick in the parts of the main body of the cabin,notice that the wires of the 3 lamps must be unified through the hole of the wire, led out from the bottom high 2.stick A37 as shown cabinet 3.split B16 into single strand rope, 0.3cm from single strand rope,fence finished table 4.take out B22 and stick it into ivy single strand rope bonsai on the first floor first floor plan main part 5 of the cabin single strand rope(0.3cm) second floor plan high platform bonsai on the second floor nightstand Outdoor Garden 1. 8 cm in total two,7 cm in total four,4 cm in total two,4 cm in total two from B17;twist into a twist-like as shown, B16 that is split into a piece of paper as a tree trunk 2.take out B22,B23,B24,and stick with tree trunk as shown,tree finished main part 4 of the cabin stairs stairs main part 3 of the cabin Pay attention to distinguish between the positive and negative poles of each lamp in total 2 in total 1

8 Outdoor Garden Install 1.Please refer to the detailed maps below, out trees, B24/25 dried flowers, mushrooms, and B18/19 into two parts and stick it on the four sides of the basebox mushroom 4.take out A53,A54,A55,A57,and stick as shown 5.take out B22, and unscrewed it on A56 6.take out A58, it 1.5cm at both ends,stick with B35 as shown,in total 3 7.take out A59,A60,A61, 2 pieces 1.5cm from single strand rope B16,stick as shown mushroom mushroom the front the side bottom box single strand rope cm from A58 at tips on both ends, stick into 4 pieces mushrooms with B35 mushroom the back outdoor swing the side 2.Connect the electronic sound control board to the house wire,pay attention to the distinction between positive and negative poles,put house in the glass ball in turn as shown 4 pieces mushrooms 9.The bottom box flat on the glass ball, and stones,b20,b21, seaweed tile in the above connect the wires put in electronic sound control board put in the house set up the house connect outdoor swing with the tree