Kristin Phillips Rectangular, upholstered Guestrooms

Transcription

1 Area Name: Guestroom Item Ottoman Revision Date: July 2017 Manufacturer: Brookline 4015 Cheyenne Drive Archdale, NC Phone: Contact: Web: Kristin Phillips Rectangular, upholstered Guestrooms (A) GR-100 QTY: MORE THAN 107 Style: Dimensions: Material/Finish: Cushion Style: Cushion Content: COM: Plush 23"W x 26"D x 17"H COM Tight w/ no welt 2.8lb UC ultra cell seat foam. Must pass NFPA 260 / CAL yds / each (no repeat) (A) GR Ottoman has hardwood frame. Required Item(s) for Approval Prior to Fabrication: Shop Drawings Manufacturer to clearly mark each carton with item ID and specification number. Must be of contract quality and suitable for commercial use. No sag spring/foam construction. All upholstered furniture and its components must pass NFPA 260 Class 1. Upholstery foam shall be urethane foam cushioning certified to meet or exceed CAL 117E and CMHR barrier wrap as required by local and state fire codes for use in hotels and other public spaces. All foam, batting, padding, and dacron wrap shall be fire retardant to meet all applicable codes. C.O.M. quantities must be verified by fabricator. Entire frame and upholstery shall be inspected during the manufacturing and again after final assembly. Tailoring shall be neat, trim and performed in a professional manner. Manufacturer to include all necessary hardware with each item. All internal hardware (hinges, screws, bolts, etc.) shall be corrosion proof. Solid hardwood frames to be certified sustainable sources. All stress joints to be connected by double doweled, screwed and glued corner reinforcement. Insure that upholstered goods will fit in elevators and through doors prior to commencing fabrication. (A) GR-100

2 Area Name: Guestroom Item Ottoman Revision Date: February 2017 Manufacturer: Fil Doux Textiles Source: 227 Fifth Avenue Brooklyn, NY Phone: Phone: Contact: Robert Pullen Contact: robert@fildoux.com Web: Web: Ottoman Pattern: Color: Star Bronce Width: 54" (A) GR Content: Abrasion: Flammability: Surface: 100% Vinylife Backing: 100% Recycled Polyester 200,000 double rubs NFPA260 (Available with ASTM E84 Treatment) Provide treatment that increases durability/cleanability while maintaining good hand; a fabric with Nano-Tex, Crypton 2.0 or equal meet these requirements. Required Item(s) for Approval Prior to Fabrication: Cutting Must be of contract quality and suitable for commercial use. Fabric to have backing as required by fabricator and/or recommended by fabric supplier. Fabric must be treated for soil and stain repellency. Purchasing is responsible for FR treatment when fabric is not in compliance with applicable codes. FR treatment must not change quality or appearance of goods. Fabric must be first run goods from full bolts. Printing, dyeing, and finishing methods should be appropriate for use of fabric. All fabric must meet UFAC Class 1 and CAL 117E as required by local and state fire codes. All fabric must pass NFPA 260. (A)GR-100.1

3 (A) GR-101 Area Name: Guestroom Item Sleeper Sofa Revision Date: July pages Manufacturer: Kellex Seating Brookline 101 Government Ave SW Hickory, NC Phone: ext Contact: Nancy Wilson Kristin Phillips nwilson@kellex.com kristin@brooklinefurniture.com Web: Style: BF Sleeper Sofa with 1/4" Decorative Guestrooms Varies per Manufacturer Dimensions: Overall: 73"W x 36"D x 34"H Arm: 23"H Seat: 23"D x 20.5"H Material/Finish: Seat Cushion Style: COM/Finish: Designer's choice Two (2) loose and reversible cushions with standard foam cushion. Dacron-wrapped 1.8 HR foam Back Cushion Style: Frame: QTY: MORE THAN Cheyenne Drive Archdale, NC Tight Back with Sewn Tufting Commercial Grade Hardwood. Corner blocked, glued, and screwed. Double doweled. Tight back. Sleeper Mechanism: Sleeper Mattress: COM: Leggett & Platt "Platinum X" Sleep System model Leggett & Platt Inner Spring with gel infused memory foam Sofa: 10 yds / each (B) GR Welt: 1 yd / each (B) GR Glides included. Casters not included. Required Item(s) for Approval Prior to Fabrication: Finish Sample, Shop Drawing Manufacturer to clearly mark each carton with item ID and specification number. Must be of contract quality and suitable for commercial use. No sag spring/foam construction. All upholstered furniture and its components must pass NFPA 260 Class 1. All foam, batting, padding, and dacron wrap shall be fire retardant to meet all applicable codes. (B) GR-101

4 (A) GR-101 Area Name: Guestroom Item Sleeper Sofa Revision Date: July pages Entire frame and upholstery shall be inspected during the manufacturing and again after final assembly. Tailoring shall be neat, trim and performed in a professional manner. Manufacturer to include all necessary hardware with each item. All internal hardware (hinges, screws, bolts, etc.) shall be corrosion proof. Solid hardwood frames to be certified sustainable sources. All stress joints to be connected by double doweled, screwed and glued corner reinforcement. Provide nylon carpet glides when applicable. Insure that upholstered goods will fit in elevators and through doors prior to commencing (B) GR-101

5 Area Name: Guestroom Item Sleeper Sofa Revision Date: February 2017 Manufacturer: Robert Allen Fabrics, Inc. Source: The Trump Group 225 Foxboro Blvd Foxboro, MA Phone: Phone: Contact: Contact: Sue Trump sue@thetrumps.com Web: Web: Guestroom Sleeper Sofas Pattern: Chevron Boucle Color: Mineral # Width: 58" Repeat: 2"H Content: 68% Olefin, 24% Polyester, 8% Cotton (A) GR Abrasion: Flammability: Backing: Finish: 100,000 DR NFPA 260, CAL , UFAC Class 1 Acrylic Nano-Tex + Durablock Required Item(s) for Approval Prior to Fabrication: Cutting Must be of contract quality and suitable for commercial use. Fabric to have backing as required by fabricator and/or recommended by fabric supplier. Fabric must be treated for soil and stain repellency. Purchasing is responsible for FR treatment when fabric is not in compliance with applicable codes. FR treatment must not change quality or appearance of goods. Fabric must be first run goods from full bolts. Printing, dyeing, and finishing methods should be appropriate for use of fabric. All fabric must meet UFAC Class 1 and CAL 117E as required by local and state fire codes. All fabric must pass NFPA 260. (A) GR-101.1

6 Area Name: Guestroom Item Sleeper Sofa Welt Revision Date: July 2017 Manufacturer: Robert Allen Fabrics, Inc. Source: The Trump Group 225 Foxboro Blvd Foxboro, MA Phone: Phone: Contact: Contact: Sue Trump sue@thetrumps.com Web: Web: Pattern: Color: Width: Repeat: Content: Abrasion: Flammability: Lightfastness: Fabric Guestroom Sleeper Sofas Single Layer S043 Great Falls N/A N/A 100% Polyester 50,000 double rubs CAL117, NFPA Hours (A) GR Required Item(s) for Approval Prior to Fabrication: Cutting Must be of contract quality and suitable for commercial use. Fabric to have backing as required by fabricator and/or recommended by fabric supplier. Fabric must be treated for soil and stain repellency. Purchasing is responsible for FR treatment when fabric is not in compliance with applicable codes. FR treatment must not change quality or appearance of goods. Fabric must be first run goods from full bolts. Printing, dyeing, and finishing methods should be appropriate for use of fabric. All fabric must meet UFAC Class 1 and CAL 117E as required by local and state fire codes. All fabric must pass NFPA 260. (A) GR-101.2

7 (A) GR-102 Area Name: Guestroom Item Dining Chair Revision Date: July 2017 QTY: 6 Manufacturer: Sandler Seating Source: Waymire Contract LLC 1175 Peachtree St NE Suite SW Montclair Dr Portland, OR Atlanta, GA Phone: Phone: Contact: Contact: Dave Waymire waymirecontract@aol.com Web: Web: Style: Dining Chair with Tapered Wooden Guestroom UNI 571-P Material/Finish: Body: Uni Boss Green Legs: Beech Maple Dimensions: Body: Frame: Overall: 18.9"W x 20.9"D x 31.1"H Seat: 18.1"H Polypropylene Beechwood Seat meets BIFMAx5.1 strength test. Seat has paddedeffect texture at front, glossy finish at back. Required Item(s) for Approval Prior to Fabrication: Finish Sample, Shop Drawings Manufacturer to clearly mark each carton with item ID and specification number. Must be of contract quality and suitable for commercial use. No sag spring/foam construction. All upholstered furniture and its components must pass NFPA 260 Class 1. Upholstery foam shall be urethane foam cushioning certified to meet or exceed CAL 117E and CMHR barrier wrap as required by local and state fire codes for use in hotels and other public spaces. All foam, batting, padding, and dacron wrap shall be fire retardant to meet all applicable codes. Entire frame and upholstery shall be inspected during the manufacturing and again after final assembly. Tailoring shall be neat, trim and performed in a professional manner. Manufacturer to include all necessary hardware with each item. All internal hardware (hinges, screws, bolts, etc.) shall be corrosion proof. Solid hardwood frames to be certified sustainable sources. All stress joints to be connected by double doweled, screwed and glued corner reinforcement. Provide nylon carpet glides when applicable. Insure that upholstered goods will fit in elevators and through doors prior to commencing fabrication. (A) GR-102

8 (A) GR-103 Area Name: Guestroom Item Lounge Chair QTY: 1 Revision Date: Manufacturer: Marquis Seating Source: 231 South Road High Point, NC Phone: Phone: Contact: Ashleigh Reier Contact: ashleigh@marquisseating.com Web: Web: Style: Lounge One Bedroom Accessible Suite Guestrooms Victoria Dimensions: Overall: 28"W x 34"D x 34"H Arm: 24.5"H Seat: 23"D x 18"H Material/Finish: Seat Cushion Style: COM: Body: COM Legs: Ebony Loose and tethered with D clips. Nylon zipper closure in casing. Cushions to be adequately vented for displacement of air and to provide increased comfort. 6.5 yds / each (A) GR Required Item(s) for Approval Prior to Fabrication: Finish Sample, Shop Drawings approval prior to purchasing or implementation of any material. Manufacturer to clearly mark each carton with item ID and specification number. Must be of contract quality and suitable for commercial use. No sag spring/foam construction. All upholstered furniture and its components must pass NFPA 260 Class 1. Upholstery foam shall be urethane foam cushioning certified to meet or exceed CAL 117E and CMHR barrier wrap as required by local and state fire codes for use in hotels and other public spaces. All foam, batting, padding, and dacron wrap shall be fire retardant to meet all applicable codes. Entire frame and upholstery shall be inspected during the manufacturing and again after final assembly. Tailoring shall be neat, trim and performed in a professional manner. Manufacturer to include all necessary hardware with each item. All internal hardware (hinges, screws, bolts, etc.) shall be corrosion proof. Solid hardwood frames to be certified sustainable sources. All stress joints to be connected by double doweled, screwed and glued corner reinforcement. Insure that upholstered goods will fit in elevators and through doors prior to commencing fabrication. (A) GR-103

9 Area Name: Guestroom Item Lounge Chair Revision Date: July 2017 Manufacturer: Fil Doux Textiles Source: 227 Fifth Avenue Brooklyn, NY Phone: Phone: Contact: Robert Pullen Contact: robert@fildoux.com Web: Web: Pattern: Color: 40 Width: Repeat: Content: Abrasion: Flammability: Backing: Guestroom Lounge Chairs Port of Spain 54" N/A 33% Polyester, 67% Acrylic 50,000 double rubs NFPA 260 Acrylic (A) GR Provide treatment that increases durability/cleanability while maintaining good hand; a fabric with Nano-Tex, Crypton 2.0 or equal meets these requirements. Required Item(s) for Approval Prior to Fabrication: Cutting Must be of contract quality and suitable for commercial use. Fabric to have backing as required by fabricator and/or recommended by fabric supplier. Fabric must be treated for soil and stain repellency. Purchasing is responsible for FR treatment when fabric is not in compliance with applicable codes. FR treatment must not change quality or appearance of goods. Fabric must be first run goods from full bolts. Printing, dyeing, and finishing methods should be appropriate for use of fabric. All fabric must meet UFAC Class 1 and CAL 117E as required by local and state fire codes. All fabric must pass NFPA 260. (A) GR-103.1