Xiaoning Jin, Ph.D. 359 Snell Engineering Center Northeastern University Boston, MA (617)

Transcription

1 Xiaoning Jin, Ph.D. 359 Snell Engineering Center Northeastern University Boston, MA (617) A. PERSONAL: A.1 Education Ph. D Industrial and Operations Engineering, University of Michigan M. S Industrial and Operations Engineering, University of Michigan B. S Mechanical Engineering, Shanghai Jiao Tong University, China Ph.D. Dissertation Advisor: Prof. Jun Ni, co-advisor: S. Jack Hu A.2 Summary of Research Contributions and Experience Assistant Professor 2016/9 Present Dept. of Mechanical & Industrial Engineering (MIE), Northeastern University PI on Achieving Smart Factory through Predictive Dynamic Scheduling, Digital Manufacturing Design Innovation Institute (DMDII) funded project, $220,000 Diagnostics, Prognostics and Health Management for Engineering Assets Multi-unit system monitoring & diagnosis (mfg. equipment, vehicles) Source of variation identification (state-space modeling) Predictive/preventive maintenance decision support (dynamic programming, stochastic optimization) Advanced Manufacturing with IoT technologies and Cyber-Manufacturing enabling technologies Roll-to-roll (R2R) printing process modeling for monitoring and control Virtual sensing, virtual metrology (dynamic data-driven methods, hybrid modeling methods) Smart Connected Systems & Fleet Health Management (e.g., connected vehicles health management, smart ships) Assistant Research Scientist 2013/ /7 Mechanical Engineering, University of Michigan, Ann Arbor, MI, USA Project lead on Prognostics and Health Management for Smart Manufacturing Systems, Sponsor: National Institute of Standards and Technology (NIST), U.S. Department of Commerce. Co-PI on Multi-Stage Modeling and Stream-of-Variation Analysis for Roll-to- Roll Production Systems project. Industry sponsor: Procter & Gamble Co. Project Leader of NSF Collaborative Research Project: Event-based Analytics for Enhanced Prognostics Design in a Big Data Environment.

2 Project Lead of Sponsored projects at NSF Industry/University Cooperative Research Center for Intelligent Maintenance Systems (IMS). Industry Collaborator: Samsung, Ford. Project Leader on Prognostics-based Resilience Design & Control Mentor of four (4) Ph.D. students on projects and dissertation research. Serve as doctoral committee member for (2) Ph.D. candidates. Postdoctoral Research Fellow 2012/ /10 Mechanical Engineering, University of Michigan, Ann Arbor, MI, USA -NSF Industry/University Cooperative Research Center for Intelligent Maintenance Systems (IMS) NSF Collaborative Research on Coupled Models for Prognostics and Health Management Project lead on Li-ion batteries electrochemical modeling, degradation analysis and remaining useful life estimation. Project lead on NSF CMMI award Short-Term Joint Maintenance and Production Decision Support Tool of Manufacturing Systems. Mentor a Ph.D. thesis on Disassembly sequence generation and line balancing for End-of-Life products. Mentor three Ph.D. students and a master student on NSF fundamental research projects Collaborative Research on Coupled Models for Prognostics and Health Management Active and Passive Maintenance Opportunity Windows Li-ion Battery Health Assessment, Diagnostics and Prognostics. Graduate Student Research Assistant 2008/ /05 Industrial & Operations Engineering, University of Michigan, Ann Arbor, MI - S. M. Wu Manufacturing Research Center, University of Michigan - NSF I/UCRC Center for Intelligent Maintenance Systems (IMS) - GM Collaborative Research Lab, University of Michigan Joint Maintenance and Production Decision Support Tools for Manufacturing Systems (NSF Fundamental Research Project) Real option-based optimization for preventive maintenance and production schedules. Manufacturing system design for resilience Stochastic End-of-Life Battery Remanufacturing Systems and Determine Optimal Operational Strategies (Funded by U.S. Department of Energy and General Motors) End-of-life decision-making model for electric vehicles Li-ion battery returns, Optimal assemble-to-order strategy for remanufacturing systems, Admission control of product returns with uncertain end-of-life quality.

3 Research Engineer Intern, 2011/ /08 Ford Motor Co., Advanced Engineering Center, Dearborn, MI USA Mixed-model assembly line over-cycle & interference analysis A.3 Membership in Professional Organizations American Society of Mechanical Engineers (ASME) Society of Manufacturing Engineers (SME) The Institute for Operations Research and Management Science (INFORMS) Manufacturing & Service Operations Management Society (MSOM) Institute of Industrial Engineering (IIE) Society of Women Engineers (SWE) B. PUBLICATIONS (with at least 143 citations): B.1 Journal Papers 1. X. Gu, X. Jin, G. Guo, J. Ni (2017) Estimation of Active Maintenance Opportunity Windows in Bernoulli Production Lines, Journal of Manufacturing Systems, 45, F. Momeni, X. Jin, J. Ni (2016) A Microscopic Approach for Genetic Degradation Modeling, International Journal of Prognostics and Health Management (ISSN , ) 3. Jin, X. D. Siegel, B. Weiss, E. Gamel, W. Wang, J. Lee, J. Ni (2016) The Present Status and Future Growth of Maintenance in US Manufacturing: Results from a Pilot Survey, Manufacturing Review, DOI: /mfreview/ Ni, J., X. Gu, and X. Jin (2015) Preventive Maintenance Opportunities For Large Production Systems, CIRP Annals Manufacturing Technology, 64(1), pp Gu. X., X. Jin, and J. Ni, Prediction of Passive Maintenance Opportunity Windows on Bottleneck Machines in Complex Manufacturing Systems, ASME Transactions on Journal of Manufacturing Science and Engineering 137(3), Liang, X., X. Jin*, J. Ni, Forecasting Product Returns for Remanufacturing Systems, Journal of Remanufacturing 4(1), pp Dong, H., X. Jin, C. Wang, (2014) Lithium-ion Battery State of Health Monitoring and Remaining Useful Life Prediction based on Support Vector Regression-Particle Filter, Journal of Power Sources. 8. Peters, S. G. Lanza, J. Ni, X. Jin, P. Yi and M. Colledani, (2014) Automotive Manufacturing Technologies an International Viewpoint, Manufacturing Review, 1: Xia, T., X. Jin, L. Xi, (2013) Operating Load Based Real-time Rolling Grey Forecasting for Machine Health Prognostics in Dynamic Maintenance Schedule, Journal of Intelligent Manufacturing, DOI: /s Jin, X, S. J. Hu, J. Ni, G. Xiao (2013) Assembly Strategies for Product Remanufacturing with Variable Quality Returns, IEEE Transactions on Automation Science and Engineering, 10(1), pp

4 11. Jin, X., J. Ni, (2013) Joint Production and Preventive Maintenance Strategy for Manufacturing Systems with Stochastic Demand, ASME Transactions on Manufacturing Science and Engineering, 135, : J. Ni*, and X. Jin, (2012) Decision Support Systems for Effective Maintenance Operations, CIRP Annals-Manufacturing Technology, 61(1), pp Jin, X., J. Ni, and Y. Koren, (2011), Optimal Control of Reassembly with Variable Quality Returns in a Product Remanufacturing System, CIRP Annals-Manufacturing Technology. 60(1) pp Jin, X., L. Li*, and J. Ni, (2009) Option Model for Joint Production and Preventive Maintenance System, International Journal of Production Economics. 119(2), pp Dong, M., S. Sun and X. Jin, (2009), Modelling and Analysis of Newsvendor-Based Trading Options in Supply Chains, International Journal of Services Operations and Informatics, 4(3), pp X. Jin, and C. Ma, (2007) Evaluation in Intensity of Labor Based on Comprehensive Fuzzy Evaluation Method, Journal of Industrial Engineering and Management (12). 17. Gu, X., X. Jin*, J. Ni, Y. Koren (2015) Estimation of Active Maintenance Opportunity Windows in Stochastic Production Lines, IEEE Transactions on Systems, Man, and Cybernetics: Systems (under review). 18. Shui, H., X. Jin*, J. Ni (2015) "Manufacturing productivity and energy efficiency: a stochastic efficiency frontier analysis", Int. J. Energy Res. DOI: /er Jin, X. (2012) Modeling and Analysis of Remanufacturing Systems with Stochastic Return and Quality Variation, Ph.D. Dissertation, University of Michigan. (Publication No ) B.2 Conference Papers or Symposium Proceedings 1. J. Ren, W. Hui, X. Jin, (2017) Engineering Effect Equivalence Enabled Transfer Learning, IEEE Conference on Automation Science and Engineering, August 2017, Xi an, China. 2. Riggs, R.J., X. Jin, S.J. Hu, (2015) Two Stage Sequence Generation for Partial Disassembly of Products with Sequence Dependent Task Times, The 22 nd CIRP Conference on Life Cycle Engineering, April 2015, Sydney, Australia. 3. Shui, H., X. Jin, J. Ni (2015) An Anomaly Detection and Diagnosis Method Based on Real- Time Health Monitoring for Progressive Stamping Processes, Proceedings of The ASME International Manufacturing Science and Engineering Conference, 2015, Charlotte, North Carolina, USA. 4. Gu, X., X. Jin, J. Ni (2015) Real-Time Maintenance Policy in Manufacturing Systems with Intermediate Buffers, Proceedings of The ASME International Manufacturing Science and Engineering Conference, 2015, Charlotte, North Carolina, USA. 5. Li, Y. X. Jin, C. Qing (2015) Markov Decision Models for Optimal Decision Making In Bottlenecks Identification and Mitigation in Advanced Manufacturing Systems, Proceedings of The ASME International Manufacturing Science and Engineering Conference, 2015, Charlotte, North Carolina, USA. 6. Gu. X., X. Jin, J. Ni, Y. Koren (2015) Manufacturing System Design for Resilience, CIRP 25 th Design Conference, March 2015, Haifa, Israel.

5 7. Weng, X, X. Jin, J. Ni, (2014) Multi-Scale Surface Characterization and Control Based High Density Measurements, Proceedings of The ASME International Manufacturing Science and Engineering Conference, 2014, Detroit, Michigan. (Best Paper Award, 1 st Place) 8. Gu. X, X. Jin*, J. Ni, (2014) Estimation of active maintenance opportunity windows in manufacturing systems, 11th International Conference on Frontiers of Design and Manufacturing, Nanjing, Jiangsu, China. (Best paper award) 9. X. Jin, J. Ni, S.J. Hu, G. Xiao, Q. Chang, Threshold-Type Admission Policy for Remanufacturing Systems, 2014 IEEE International Conference on Automation Science and Engineering (CASE), , Taiwan. 10. Gu. X., X. Jin*, J. Ni, (2014) Resilience Measures of Manufacturing Systems under Disruptions, Proceedings of The ASME International Manufacturing Science and Engineering Conference, 2014, Detroit, Michigan. 11. Lou, Y., Dong, H., X. Jin*, J. Ni, S. Cheng, H. Zhu, (2014) Data-Driven Predictive Nickel- Hydrogen Battery Health Monitoring and Prognostics, Proceedings of 42th North America Manufacturing Research Conference, 2014, Detroit, Michigan. 12. Gusikhin, X. Jin, E. Klampfl, D. Reich, R. Visintainer (2013) Dynamic Modeling of Operator Overload Conditions in Mixed Model Automotive Assembly, Proceedings of IFAC Conference on Manufacturing Modelling, Management, and Control (MIM), Russia. 13. Y. Lou, X. Jin* and J. Ni, (2013). Lithium-ion Battery Degradation Related Parameter Estimation Using Electrochemistry-Based Dual Models, 8th Word Congress on Engineering Asset Management, October, Hongkong, China 14. X. Jin* and J. Ni (2012) Dynamic Strategies for Preventive Maintenance Scheduling with throughput target variation, Proceedings of The ASME International Manufacturing Science and Engineering Conference, X. Jin*, G. Xiao, Q. Chang, S. Biller, J. Ni, S. Jack Hu (2012) Performance Analysis and Optimization of Remanufacturing Systems with Stochastic Returns, Proceedings of the ASME International Manufacturing Science and Engineering. 16. X. Jin, L. Li* and J. Ni, (2009) Integrated Production and Preventive Maintenance Decision Making Using Option-Based Cost Model, Proceedings of the ASME International Manufacturing Science and Engineering Conference, M. Dong, D. Yang, X. Jin, (2008) Strategy analysis of newsvendor based trading options in supply chains, IEEE International Conference on Service Operations and Logistics, and Informatics. 18. X. Zeng, X. Jin and Q. Wang, (2007) Trading Options in Supply Chain, Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management. C. TEACHING EXPERIENCE OR 7230 Probabilistic Operations Research, Spring 2017, Northeastern University (NU) MEIE 4701/4702 Senior Capstone Design, Fall 2016, Spring 2017, NU Instructor: ME401 Statistical Quality Control and Design, Winter 2016, UM Co-Instructor: ME450 Capstone Design, Fall 2015, UM Co-Instructor: IOE 441 Production & Inventory Control, Winter 2013, UM

6 Guest lecturer: ME483/MFG502 Manufacturing Systems Design, Winter 2013, UM Guest lecturer: ME587, Global Manufacturing Revolution, UM, Graduate Student Instructor: Economics, UM-SJTU Joint Institute, 2008 Summer Grader: Manufacturing Systems Design, UM, 2009 D. HONORS & SERVICE: D.1 Honors 2016 SME Outstanding Young Manufacturing Engineer Award Best Paper Award (1 st Place), ASME International Manufacturing Science and Engineering Conference, 2014, Detroit, Michigan Best Paper Award, 11th International Conference on Frontiers of Design and Manufacturing, Nanjing, China, 2014 Nominated for ASME Pi Tau Sigma Gold Medal, 2016 Outstanding Research Award, S. M. Wu Manufacturing Center, University of Michigan (UM), 2011 Outstanding Service Award, S. M. Wu Manufacturing Center, UM, 2010 Rackham Graduate Fellowship, UM, Best Undergraduate Thesis, Shanghai Jiao Tong University, 2006 Outstanding Student Leadership Award, Shanghai Jiao Tong University, 2006 D.2 Service as Session Chair, Coordinator, and Reviewer of Professional Journals and Conferences Special Session Chair: IEEE Conference on Automation Science and Engineering, 2017 Symposium Co-organizer: ASME Manufacturing Science & Engineering Conference, 2017 Session Chair, ASME Manufacturing Science & Engineering Conference, 2012, 2014, 2015 Session Co-Chair, IEEE Conference on Automation Science and Engineering, Sweden, 2015 Session Chair, INFORMS 2015, San Francisco, CA, US Coordinator, Manufacturing Research Seminar, UM, Reviewer of Peer-reviewed Journals and Conferences IISE Transactions Journal of Manufacturing Science and Engineering Journal of Manufacturing Systems IEEE Transactions on Systems, Man and Cybernetics IEEE Transactions on Automation Science and Engineering International Journal of Precision Engineering and Manufacturing Mathematical Problems in Engineering International Journal of Production Research Manufacturing Review Journal of Services Operations and Informatics Energies International Conference on Control, Decision and Information Technologies IEEE International Conference on Automation Science and Engineering ASME Manufacturing Science and Engineering Conference