marine, construction, drilling, floating production, decommissioning and renewables industries.

Transcription

1 Maritime Assurance & Consulting Ltd (MAC), a Bureau Veritas Group Company, is a UK-based company with a global reach, offering a comprehensive range of support services to the Dynamic Positioning Assurance & Consulting Failure Modes and Effects (Criticality) Analysis (FME(C)A) of DP systems Annual DP and DP FME(C)A trials and development DP equipment configuration analysis DP vessel conversion and upgrade studies DP operations manual development and review DP incident investigation Design reviews Tendering support Production of specifications FATs and CATs Electrical analysis Engineering Assurance & Consulting Marine Assurance & Consulting Marine assurance Safety surveys Suitability surveys Condition surveys Pre-purchase surveys and evaluation Regulatory gap analysis Failure investigation Legal and arbitration expert witness ISM audits and development Risk assessments, HAZIDs, HAZOPs On/off hire inspections Client representation For term or spot hire vessel charter; gathering safety stats, regular visits and a monthly HSE report (if required) Support and assistance with Maritime Labour Convention (2006) compliance Marine Warranty Surveying (MWS) Document reviews Third-party independent analysis HIRAs Operational reviews Vessel suitability surveys Structural surveys Site attendance Offshore attendance Certificate of approvals Project Assurance & Consultancy Failure Modes and Effects (Criticality) Analysis (FME(C)A) of non-redundant systems, cranes, pipe and cable-lay, bilge and ballast systems Project management services, system installations and audits, offshore projects, constructions support Works instructions and procedures, marine procedures, marine operations manuals, joint operations manuals Regulatory compliance, marine and offshore legislation, gap analysis Vessel safety management, ISM code compliance, marine management systems System systems of work, dropped object surveys, safety management system audits, permit to work Quality assurance and quality management Environmental assessments, environmental procedures and processes Tel: +44 (0) info@mac-l.com decommissioning and renewables industries. 30 Design and specification of mooring and riser systems Project management and engineering of offshore activities Ship design Stability assessments including deadweight surveys and inclination tests Due diligence Condition surveys Pre-purchase surveys and evaluation Failure investigation Non-biased equipment selection Seafastening Pavilion One, Craigshaw Business Park Craigshaw Road Aberdeen, AB12 3AR, UK marine, construction, drilling, floating production, 34 Memberships: MAC provides clients with significant risk control to safeguard reputation at operational, project, management and corporate levels.

2 Maritime Assurance & Consulting Ltd (MAC), a Bureau Veritas Group Company, is a UK-based company with a global reach, offering a comprehensive range of support services to the Dynamic Positioning Assurance & Consulting Failure Modes and Effects (Criticality) Analysis (FME(C)A) of DP systems Annual DP and DP FME(C)A trials and development DP equipment configuration analysis DP vessel conversion and upgrade studies DP operations manual development and review DP incident investigation Design reviews Tendering support Production of specifications FATs and CATs Electrical analysis Engineering Assurance & Consulting Marine Assurance & Consulting Marine assurance Safety surveys Suitability surveys Condition surveys Pre-purchase surveys and evaluation Regulatory gap analysis Failure investigation Legal and arbitration expert witness ISM audits and development Risk assessments, HAZIDs, HAZOPs On/off hire inspections Client representation For term or spot hire vessel charter; gathering safety stats, regular visits and a monthly HSE report (if required) Support and assistance with Maritime Labour Convention (2006) compliance Marine Warranty Surveying (MWS) Document reviews Third-party independent analysis HIRAs Operational reviews Vessel suitability surveys Structural surveys Site attendance Offshore attendance Certificate of approvals Project Assurance & Consultancy Failure Modes and Effects (Criticality) Analysis (FME(C)A) of non-redundant systems, cranes, pipe and cable-lay, bilge and ballast systems Project management services, system installations and audits, offshore projects, constructions support Works instructions and procedures, marine procedures, marine operations manuals, joint operations manuals Regulatory compliance, marine and offshore legislation, gap analysis Vessel safety management, ISM code compliance, marine management systems System systems of work, dropped object surveys, safety management system audits, permit to work Quality assurance and quality management Environmental assessments, environmental procedures and processes Tel: +44 (0) info@mac-l.com decommissioning and renewables industries. 30 Design and specification of mooring and riser systems Project management and engineering of offshore activities Ship design Stability assessments including deadweight surveys and inclination tests Due diligence Condition surveys Pre-purchase surveys and evaluation Failure investigation Non-biased equipment selection Seafastening Pavilion One, Craigshaw Business Park Craigshaw Road Aberdeen, AB12 3AR, UK marine, construction, drilling, floating production, 34 Memberships: MAC provides clients with significant risk control to safeguard reputation at operational, project, management and corporate levels.

3 Maritime Assurance & Consulting Safeguarding reputation at operational, project, management and corporate levels A Quality Service Our goal is to provide a high quality service with a strong focus on meeting clients needs, building long-term relationships and achieving commercial success. We bring a reliable, high-quality alternative to clients in-house resources offering the highest level of practical experience, industry knowledge, know-how, contacts and confidentiality. Our success is based on experienced, technical, forward-thinking and entrepreneurial people. Asset Experience Our people are our most important asset. To support the diversity of services on offer from MAC, we rely on the cumulative experience of our people who have developed a breadth and depth of expertise within the marine world. This includes all types of marine assets, from floating vessels, to fixed and subsea infrastructure, spanning all industry sectors from oil and gas to renewables. Our people are our most important asset

4 An Extensive Range of Services With an experienced team of Master Mariners, Naval Architects, Marine, Electrical and Structural Engineers our assurance and consulting service capabilities are extensive. Our desire is to be part of the life cycle of a marine asset from the concept stage of a new build through to detailed design, providing services during the project, manufacturing and shipyard phases and supporting clients during the asset s operation, maintenance, conversion and life extension. We can provide a call-out service seven days-a-week. Our services fall into six main areas: With an experienced team of Master Mariners, Naval Architects, Marine, Electrical and Structural Engineers our assurance and consulting service capabilities are extensive Dynamic Positioning Assurance & Consulting With a multidisciplinary team of technical and operational experts, MAC provides DP-related services to support our clients to select, integrate, operate and verify according to their specific vessel application. Whether identifying the safest operational mode or verifying the worst case failure mode through FME(C)A or proving an installation through FMEA or annual DP trials, MAC provides clients with effective recommendations to enhance safe operability at all times. Through our experience with our DP FME(C)A work and extensive systems knowledge, we also provide analysis and solutions to allow our clients to operate their vessels in the most cost-effective/ commercially viable way. This can include analysis on potential upgrade or conversion work and mission equipment system interface/integration analysis. Engineering Assurance & Consulting Our widely experienced Naval Architects and Structural Engineers provide services to the offshore, marine and renewables markets over a broad range of design and consultancy topics. Areas of expertise include marine warranty services; project management and engineering for marine operations; general naval architecture, including stability, motions, moorings and risers, as well as basic ship design; structural design and engineering; concept evaluation; due diligence and expert witness. Integrated into client project teams, their skills enable MAC to provide further high-end services, for example, independent design verification and marine assurance. Marine Assurance & Consulting Through the combined expertise of our Master Mariners and Marine Engineers, MAC offers operations-based services in the areas of marine compliance and safety. In addition, we can provide an extension to our clients resources as independent client representatives in sensitive operations on- and offshore. In conjunction with our Engineering team of Naval Architects and Structural Engineers, we also offer Marine Assurance services such as checking and approval of loadouts, transportation and installation of jackets, structures, modules and integrated decks, towed pipeline bundles and subsea installations.

5 Marine Warranty Surveying MAC offers Marine Warranty Surveying (MWS) and third-party verification services on a vast range of marine, offshore and renewables projects. It is MACs aim to safeguard the interests of both the client and insurer by checking that all marine operations are engineered and planned correctly, and are then carried out according to the approved procedures, utilising appropriate vessels and equipment. By adopting a proactive approach to MWS, MAC aims to add value to projects, working closely with clients and subcontractors to achieve successful completion of the scope while minimising risks. Project Assurance & Consultancy Services MAC provides project assurance and consultancy services to clients, utilising a multi-disciplined team covering a wide range of areas including, project management services, failure mode effects criticality analysis (including non-redundant systems), work instructions and procedures. Each project is approached on a case-by-case basis, adopting a solution tailored to the client s requirements and schedule. MAC provides compliance services to help our clients ensure they are prepared for, and are meeting the latest legislation and code requirements, to the benefit of their operations. Areas of compliance services include regulatory compliance, safety management systems, safe systems of work, quality assurance and quality control, environmental assessment, and compliance service resources. By adopting a proactive approach to MWS, MAC aims to add value to projects, working closely with clients and subcontractors to achieve successful completion of the scope while minimising risks

6 Maritime Assurance & Consulting Ltd (MAC), a Bureau Veritas Group Company, is a UK-based company with a global reach, offering a comprehensive range of support services to the Dynamic Positioning Assurance & Consulting Failure Modes and Effects (Criticality) Analysis (FME(C)A) of DP systems Annual DP and DP FME(C)A trials and development DP equipment configuration analysis DP vessel conversion and upgrade studies DP operations manual development and review DP incident investigation Design reviews Tendering support Production of specifications FATs and CATs Electrical analysis Engineering Assurance & Consulting Marine Assurance & Consulting Marine assurance Safety surveys Suitability surveys Condition surveys Pre-purchase surveys and evaluation Regulatory gap analysis Failure investigation Legal and arbitration expert witness ISM audits and development Risk assessments, HAZIDs, HAZOPs On/off hire inspections Client representation For term or spot hire vessel charter; gathering safety stats, regular visits and a monthly HSE report (if required) Support and assistance with Maritime Labour Convention (2006) compliance Marine Warranty Surveying (MWS) Document reviews Third-party independent analysis HIRAs Operational reviews Vessel suitability surveys Structural surveys Site attendance Offshore attendance Certificate of approvals Project Assurance & Consultancy Failure Modes and Effects (Criticality) Analysis (FME(C)A) of non-redundant systems, cranes, pipe and cable-lay, bilge and ballast systems Project management services, system installations and audits, offshore projects, constructions support Works instructions and procedures, marine procedures, marine operations manuals, joint operations manuals Regulatory compliance, marine and offshore legislation, gap analysis Vessel safety management, ISM code compliance, marine management systems System systems of work, dropped object surveys, safety management system audits, permit to work Quality assurance and quality management Environmental assessments, environmental procedures and processes Tel: +44 (0) info@mac-l.com decommissioning and renewables industries. 30 Design and specification of mooring and riser systems Project management and engineering of offshore activities Ship design Stability assessments including deadweight surveys and inclination tests Due diligence Condition surveys Pre-purchase surveys and evaluation Failure investigation Non-biased equipment selection Seafastening Pavilion One, Craigshaw Business Park Craigshaw Road Aberdeen, AB12 3AR, UK marine, construction, drilling, floating production, 34 Memberships: MAC provides clients with significant risk control to safeguard reputation at operational, project, management and corporate levels.