OFFSHORE SPECIALIST ENGINEERING SERVICES. ZEE Engineering Consultants

Transcription

1 OFFSHORE SPECIALIST ENGINEERING SERVICES ZEE Engineering Consultants

2 With experienced engineers, with advanced knowledge in FEA modeling and backed by state of the art software, ZEE Engineering Consultants are capable of undertaking Finite Element Stress analysis of complex structures. ZEE have performed various projects requiring complex FEA modeling to accurately verify stresses in structural components. Projects undertaken by ZEE are varied in nature, such as Stress checks for Ship Hull and Deck Structure interface, Rig Jackhouses, Rig leg Spudcans, Jacket Skirt Piles, Suction Piles, Offshore Clamping Devises, explosion proof Walls and Pipeline Ploughs. This has enabled ZEE to provide clients with cost effective solution without sacrificing safety. ZEE has also assisted Installation Contractors to verify installation components stresses during the installation process using the FEA modeling techniques. ZEE provides a broad range of services in support of design and modifications of FPSOs, RIGs, Offshore Platforms, SPMs, Mooring Terminals and offshore floaters. ZEE uses a wide range of numerical modeling techniques and computer simulations to assist the offshore oil and gas industries to optimize design, minimize commercial risks and maximize safety.

3 ZEE Engineering Consultants have performed various analysis pertaining to mooring systems and risers for the offshore oil and gas industry. Backed by state of the art software tools, ZEE is capable of undertaking fully coupled, multi-body time domain numerical simulations of complex mooring systems. Analysis can be carried out in quasi-static and dynamic modes. With advanced knowledge of floating bodies, fluid mechanics and line dynamics, ZEE is capable of assisting Installation Contractors to perform deployment and recovery analysis of deepwater and shallow water operations. ZEE uses a wide range of numerical modeling and computer simulation techniques to assist the offshore oil and gas industry to optimize design, minimize commercial risks and maximize safety. ZEE also provides a broad range of services in support of design and installation of mooring terminals, FPSO modifications, process modifications, structural design of hulls and floaters and model testing.

4 Offshore platforms are typically designed using established design codes. Reliability analysis may be carried out as a second step, to ensure that the platform attains certain target probabilities of failure. Optimization of these structures is based on experience of the design engineer, and may often only be based on optimizing individual members. Normally, only the initial design, rather than ultimate strength criteria, is considered in the optimization problem. The failure and post-failure behavior of platform components, such as brace members and tubular joint connections, are modeled explicitly. ZEE Engineering Consultants has carried out numerous structural integrity audits on platforms which have exceeded the design life, but need to be operative with structural enhancement, using the pushover techniques. To conduct platform ultimate strength analyses to establish failure, the loading must be increased beyond that corresponding to the applied load. Thus, the environmental loading pattern is increased using incremental loads until the ultimate strength is reached. Beyond the peak load factor point, the strength will soften, either gradually or rapidly depending on the mode of failure and the behavior of the members and foundations. The term pushover analysis or sometimes collapse analysis is widely used within the offshore industry to describe three-dimensional, non-linear, large deflection, static finite element analysis. The horizontal forces on the platform structure, representing wave forces, are increased until structural collapse is reached.

5 Engineering design, construction and installation of subsea pipelines have been one of ZEE s main activities since the company was formed in Although many other engineering disciplines have since been added to ZEE s range of engineering services, subsea pipelines still constitute a major part of ZEE s activities. Primary emphasis has always been on pipeline design and installation technologies, needed by most clients for a cost effective completion and operations of pipeline systems in all environments. ZEE has designed and analyzed pipelines for various cost effective installation methods; surface tow method, control depth tow method, bottom tow method, conventional installation using Lay-barge method, to name a few. ZEE s range of services includes: Develop route selection criteria Supervise the survey field and data processing work Design basis definition Pipeline hydraulics and sizing Initial selection of pipeline route Stability analysis and determination of weight coating and/or trenching requirements Wall thickness and steel grade calculation using traditional or limit-state design criteria Pipe spanning analysis and determination of pipe support needs Upheaval buckling analysis and assessment Fatigue and fracture mechanic assessment Riser Vortex Induced Vibration studies Risk analysis studies Riser analyses (platform risers, J-tubes, steel catenary risers, top tensioned and hybrid risers) Shore crossing studies Pipeline installation studies Cost analyses Preparation of material specifications Preparation of construction specifications Preparation of route drawings Apart from engineering designs of subsea pipelines, ZEE has provided a broad range of services for the pipeline installation contractors in support of pipelay installation with designs of Pipelay Stingers, Lay-barge modification, designs of Lay-barge for swampy areas, backfill plough designs, dead-weight anchor designs, floatation devices, etc.

6 Recent years have seen the need to develop deepwater reserves. This need has resulted in the use of concepts based on floating structures. In particular the shipshaped structures such as FPSO s (Floating Production Storage Offloading) have seen an increased in popularity within the oil and gas industry. Since 1994, ZEE has established an excellent reputation for quality engineering and project management of Floating Production System (FPS) including conversion, modification or new building of tanker based FPSO / FSO systems. ZEE has highly skilled Naval Architects, Ship Structural Engineers, Marine Engineers, System Designers, Process Engineers and Offshore Installation Engineers, supported by other disciplines such as subsea, structural, piping, instrument, electrical, safety and drafting. ZEE s broad skill range combined with wide-ranging experience gained from various marine projects will ensure realistic and technologically up to date solutions tailored to our client s particular needs. ZEE s main goal has always been to create innovative yet practical and cost effective solutions.

7 With it s multi-discipline engineering and design office uses the latest computer aided design and analytical software, with finite element analysis modeling capabilities. ZEE is capable of undertaking the most difficult problems encountered in either a mobile offshore platform (Rig) refurbishment and upgrade project, or in the development of the design of a complex production module. BOP handling system design. Drill floor and derrick upgrade engineering. Early production system design. Foundation design and verification for Rig movements. From Conceptual or Front End Engineering Design to certified stress calculation of the detailed design, ZEE can respond instantly and efficiently to both client and third party certification requirements. ZEE s conceptual engineering group considers ideas and associated risks and then rigorously tests feasibility of implementation within strategic constraints. This is not limited to just technical challenges but combines financial evaluations with socio economic considerations to deliver optimized recommendations for maximum value to the client. ZEE s broad range of services includes the following. Inplace stress verification of Mobile Offshore Platforms. Stress Audits for Rig components. Living Quarters design and upgrades. Helidecks design. Cantilever conversion and hull strengthening design. Process system design, modification and upgrades.

8 ZEE ENGINEERING CONSULTANTS (ZEE) was established in 1986 to provide engineering services to the Oil/Gas Industry in South East Asia. ZEE Engineering Consultants MALAYSIA 882, Block A1, Pusat Dagang Setiajaya (Leisure Commerce Square), No. 9, Jln. PJS 8/9, Petaling Jaya, Malaysia Phone: / 9001 Fax: hanifah@zee-eng.com Website: SINGAPORE 1, Goldhill Plaza #02-09, Podium Block, Newton Road, Singapore Phone: Fax: JAKARTA Jl. Pluit Karang Cantik VII, Block R 3 U No. 9, Pluit, Jakarta 14450, Indonesia Phone: Since its inception ZEE has participated in a number of major projects in this region. Over the years ZEE has demonstrated capabilities in conceptual studies, detail design, and contract supervision of Oil/Gas related projects. The philosophy at ZEE is to provide quality engineering to its clients within budgets costs, and time schedules. ZEE pride itself in working with clients to achieve the successful conclusion of projects. The staff at ZEE Engineering comprise of design and engineering personnel supported by stateof-the-art computer hardware and software, necessary for handling projects of almost any complexity. In response to the growing needs of the oil and gas industry in South East Asia, ZEE engineering Consultations has extended its capability by forming joint venture associations with key expertise in the industry. This has enhanced ZEE s capabilities to respond quickly and effectively to multi-discipline demands of the industry. Fax: