TECO Straps TRS The Ron Sammons The Ron Sammons is lightweight to handle yet retains its structural strength so it can be used instead of a traditional Heavy Duty Strap for providing lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The Building Regulations BS 5268 Part 3 and other building standards for lateral restraint. Lightweight design makes it easier to handle. No need to notch joists making it easier and quicker to install. Easier to build into brickwork courses. More cost effective when compared to the traditional Heavy Duty Strap and Heavy Edge Rolled Strap. TRS TRS The Ron Sammons Galvanised steel EN 10346 G600. Manufactured to EN 845-1:2013. Tested by Lucideon Ltd Notification Body No.1289. For horizontal applications Use min 6 no. 3.75 x 30mm square twist nails or equivalent fixed to timber joists/rafters. Dimensions (mm) Overall length (including any bend) Pre Galvanised - 1.4mm thick x 36mm wide TRS600B TRS800B TRS0B TRS1200B TRS1500B TRS1600B 600 800 0 1200 1500 1600 Declared values for the TRS strap Fixed to timber joists with noggings Fixed to I-joists with noggings 9.5kN 9.2kN Tel 01273 423 983 Fax 01273 410 074 1.1mm deflection at 1/3rd of this load 1.5mm deflection at 1/3rd of this load Email sales@tecoproducts.co.uk www.tecoproducts.co.uk 1
LD, HD, ER, LDTF & HDTF Traditional Straps Traditional Heavy and Light Duty Restraint Straps designed to The Building Regulations BS 5268 Part 3 and other building standards for vertical (LD) restraint or lateral (HD) restraint. Light Duty - LD Light Duty Restraint Straps are generally for vertical applications such as holding down a wall plate. Heavy Duty - HD Heavy Duty Restraint Straps are generally for horizontal applications providing lateral restraint of roof trusses, rafters and joists tied to masonry. Light Duty Straps Popular stock sizes are listed on the following page but straps can be ordered to any length up to 15m. Holed 6mm at 25mm offset centres. Available in galvanised or stainless steel. HD Bent Galvanised steel EN 10346 DX51D Z275 or grade 1.4301 austenitic stainless steel. Manufactured to EN 845-1:2013. Tested by CERAM Research Ltd Notification Body No.1289. HD Bent & Twisted Light Duty - LD When used as a vertical restraint to hold down a wall plate use a minimum length of 900mm. For galvanised straps use min 10 no. 3.75 x 30 square twist nails or 6 no. 4 x 40 screws (drilled and plugged) into the masonry. Use min 2 no. 3.75 x 30 square twist nails into wall plate. For stainless steel straps use min 10 no. 3.75 x 30 annular ring shank nails stainless steel or 6 no. 4 x 40 stainless steel screws (drilled and plugged) into the masonry. Use min. 2 no. 30 x 3.75 annular ring shank nails into wall plate. Heavy Duty - HD For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters. For stainless steel use min 7 no. 3.75 x 30 annular ring shank stainless steel nails or equivalent fixed to timber joists/rafters. Twisted Strap Bent Strap Flat Strap 2
Light Duty Straps Popular stock sizes are listed below but straps can be ordered to any length up to 15m. Stainless steel and bent & twisted straps are on page 5 of this literature. Pre Galvanised - 2.4mm Dimensions (mm) Overall length including bend or twist or twist LD200B50 Light Duty Galv Bent 200 50 LD300B Light Duty Galv Bent 300 LD400B Light Duty Galv Bent 400 LD450B Light Duty Galv Bent 450 LD600B Light Duty Galv Bent 600 LD800B Light Duty Galv Bent 800 LD900B Light Duty Galv Bent 900 LD0B Light Duty Galv Bent 0 LD1200B Light Duty Galv Bent 1200 LD1200B150 Light Duty Galv Bent 1200 150 LD1400B Light Duty Galv Bent 1400 LD1600B Light Duty Galv Bent 1600 LD200F Light Duty Galv Flat 200 - LD220F Light Duty Galv Flat 220 - LD250F Light Duty Galv Flat 250 - LD300F Light Duty Galv Flat 300 - LD400F Light Duty Galv Flat 400 - LD600F Light Duty Galv Flat 600 - LD800F Light Duty Galv Flat 800 - LD900F Light Duty Galv Flat 900 - LD0F Light Duty Galv Flat 0 - LD1F Light Duty Galv Flat 1 - LD1200F Light Duty Galv Flat 1200 - LD1400F Light Duty Galv Flat 1400 - LD1600F Light Duty Galv Flat 1600 - LD3000F Light Duty Galv Flat 3000 - LD3600F Light Duty Galv Flat 3600 - LD600T Light Duty Galv Twisted 600 LD600T150 Light Duty Galv Twisted 600 150 LD750T Light Duty Galv Twisted 750 LD800T Light Duty Galv Twisted 800 LD900T Light Duty Galv Twisted 900 LD900T150 Light Duty Galv Twisted 900 150 LD0T Light Duty Galv Twisted 0 LD0T150 Light Duty Galv Twisted 0 150 LD1200T Light Duty Galv Twisted 1200 3
Heavy Duty Straps Popular stock sizes are listed below but straps can be ordered to any length up to 15m. Stainless steel and bent & twisted straps are on page 5 of this literature. Edge Coated Galvanised Steel - 4mm Overall length including bend or twist Dimensions (mm) HD400B Heavy Duty Galv Bent 400 HD600B Heavy Duty Galv Bent 600 HD600B150 Heavy Duty Galv Bent 600 150 HD800B Heavy Duty Galv Bent 800 HD800B150 Heavy Duty Galv Bent 800 150 HD900B Heavy Duty Galv Bent 900 HD900B150 Heavy Duty Galv Bent 900 150 HD0B Heavy Duty Galv Bent 0 HD0B150 Heavy Duty Galv Bent 0 150 HD1200B Heavy Duty Galv Bent 1200 HD1200B150 Heavy Duty Galv Bent 1200 150 HD1300B Heavy Duty Galv Bent 1300 HD1300B150 Heavy Duty Galv Bent 1300 150 HD1400B150 Heavy Duty Galv Bent 1400 150 HD1500B Heavy Duty Galv Bent 1500 HD1500B150 Heavy Duty Galv Bent 1500 150 HD1600B Heavy Duty Galv Bent 1600 HD1600B150 Heavy Duty Galv Bent 1600 150 HD1800B150 Heavy Duty Galv Bent 1800 150 HD300F Heavy Duty Galv Flat 300 - HD400F Heavy Duty Galv Flat 400 - HD600F Heavy Duty Galv Flat 600 - HD800F Heavy Duty Galv Flat 800 - HD0F Heavy Duty Galv Flat 0 - HD1200F Heavy Duty Galv Flat 1200 - HD1300F Heavy Duty Galv Flat 1300 - HD1400F Heavy Duty Galv Flat 1400 - HD1500F Heavy Duty Galv Flat 1500 - HD1600F Heavy Duty Galv Flat 1600 - HD1800F Heavy Duty Galv Flat 1800 - HD2000F Heavy Duty Galv Flat 2000 - HD3000F Heavy Duty Galv Flat 3000 - HD3600F Heavy Duty Galv Flat 3600 - HD4000F Heavy Duty Galv Flat 4000 - HD400T Heavy Duty Galv Twisted 400 HD600T Heavy Duty Galv Twisted 600 HD800T Heavy Duty Galv Twisted 800 HD0T Heavy Duty Galv Twisted 0 HD0T150 Heavy Duty Galv Twisted 0 150 HD1200T Heavy Duty Galv Twisted 1200 HD1200T150 Heavy Duty Galv Twisted 1200 150 HD1400T Heavy Duty Galv Twisted 1400 HD1500T150 Heavy Duty Galv Twisted 1500 150 HD1600T Heavy Duty Galv Twisted 1600 4
Stainless Steel Straps Popular stock sizes are listed below but straps can be ordered to any length up to 15m. Dimensions (mm) Overall length including bend Light Duty Stainless Steel - 2.4mm LDSS600B Light Duty Stainless Bent 600 LDSS900B Light Duty Stainless Bent 900 LDSS0B Light Duty Stainless Bent 0 LDSS1200B Light Duty Stainless Bent 1200 LDSS1600B Light Duty Stainless Bent 1600 LDSS600F Light Duty Stainless Flat 600 - LDSS900F Light Duty Stainless Flat 900 - LDSS0F Light Duty Stainless Flat 0 - LDSS1200F Light Duty Stainless Flat 1200 - LDSS1600F Light Duty Stainless Flat 1600 - LDSS600T Light Duty Stainless Twisted 600 LDSS900T Light Duty Stainless Twisted 900 LDSS0T Light Duty Stainless Twisted 0 LDSS1200T Light Duty Stainless Twisted 1200 Heavy Duty Stainless Steel - 4mm HDSS600B Heavy Duty Stainless Bent 600 HDSS900B Heavy Duty Stainless Bent 900 HDSS0B Heavy Duty Stainless Bent 0 HDSS1200B Heavy Duty Stainless Bent 1200 HDSS1600B Heavy Duty Stainless Bent 1600 HDSS600F Heavy Duty Stainless Flat 600 - HDSS900F Heavy Duty Stainless Flat 900 - HDSS0F Heavy Duty Stainless Flat 0 - HDSS1200F Heavy Duty Stainless Flat 1200 - HDSS1600F Heavy Duty Stainless Flat 1600 - HDSS600T Heavy Duty Stainless Twisted 600 HDSS900T Heavy Duty Stainless Twisted 900 HDSS0T Heavy Duty Stainless Twisted 0 HDSS1200T Heavy Duty Stainless Twisted 1200 HDSS1600T Heavy Duty Stainless Twisted 1600 Bent & Twisted Straps Popular stock sizes are listed below but straps can be ordered to any length up to 15m. Dimensions (mm) Overall length Distance between Light Duty Pre Galvanised 2.4mm LD0BT Light Duty Galv Bent & Twist 0 LD1200BT Light Duty Galv Bent & Twist 1200 Heavy Duty Edge Coated Galvanised Steel - 4mm HD600B150T Heavy Duty Galv Bent & Twisted 600 150 HD800B150T Heavy Duty Galv Bent & Twisted 800 150 HD0BT Heavy Duty Galv Bent & Twisted 0 HD0B150T Heavy Duty Galv Bent & Twisted 0 150 HD1200BT Heavy Duty Galv Bent & Twisted 1200 HD1200B150T Heavy Duty Galv Bent & Twisted 1200 150 HD1400B150T Heavy Duty Galv Bent & Twisted 1400 150 HD1600B150T Heavy Duty Galv Bent & Twisted 1600 150 5
TECO Heavy Edge Rolled Straps The ER Strap has rolled edges along the entire strap making it feel substantial for those that prefer a more traditional strap without the full cost. In tests the TECO ER Strap performed equally as well as or better than the equivalent traditional 5mm Heavy Duty Strap, providing lateral restraint of roof trusses, rafters and joists tied to masonry. Designed to The Building Regulations BS 5268 Part 3 and other building standards for lateral restraint. Lighter design makes it easier to handle. More cost effective when compared to the traditional heavy duty strap. Available flat, bent or twisted. 2.5mm thick rolled to 5mm. 30mm wide. Holed 6mm at 25mm offset centres. ER Galvanised steel EN 10346 DX51D Z275, manufactured to EN 845-1:2013. Tested by CERAM Research Ltd Notification Body No.1289. ER Bent When used as a lateral restraint; use min 6 no. 4 x 75 round wire nails or equivalent fixed to timber joists/rafters. Dimensions (mm) Overall length (including any bend) Pre Galvanised - 2.4mm ER600B Edge Rolled Bent 600 ER600B150 Edge Rolled Bent 600 150 ER0B Edge Rolled Bent 0 ER0B150 Edge Rolled Bent 0 150 ER1200B Edge Rolled Bent 1200 ER1200B150 Edge Rolled Bent 1200 150 ER1600B Edge Rolled Bent 1600 ER1600B150 Edge Rolled Bent 1600 150 ER1800B Edge Rolled Bent 1800 ER1800B150 Edge Rolled Bent 1800 150 ER2000B150 Edge Rolled Bent 2000 150 ER600F Edge Rolled Flat 600 - ER0F Edge Rolled Flat 0 - ER1200F Edge Rolled Flat 1200 - ER1400F Edge Rolled Flat 1400 - ER1600F Edge Rolled Flat 1600 - ER1800F Edge Rolled Flat 1800 - ER600T Edge Rolled Twisted 600 ER0T Edge Rolled Twisted 0 ER1200T150 Edge Rolled Twisted 1200 150 ER1600T150 Edge Rolled Twisted 1600 150 ER1800T Edge Rolled Twisted 1800 EDGE ROLLED STRAP 6
TECO Timber Frame Straps The Timber Frame Strap is a holding down strap providing restraint against uplift to timber frames. Holed 6mm at 25mm offset centres. Available in two thicknesses. Available in both galvanised and stainless steel. Light Duty - Stainless Steel only Grade 1.4301 austenitic stainless steel to EN 88-2. Heavy Duty - Galvanised or Stainless Steel Edge coated galvanised steel EN 10346 DX51D Z600 or grade 1.4301 austenitic stainless steel to EN 88-2. Use appropriate fixings. Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa. Thickness Dimensions LDTFSS Overall length Pre Galvanised HDTF Timber Frame Strap 4 900 Stainless Steel LDTFSS Timber Frame Strap 2.4 900 HDTFSS Timber Frame Strap 4 900 TIMBER FRAME STRAP 7