Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish
|
|
- Baldwin Wilcox
- 6 years ago
- Views:
Transcription
1 Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F Table 15 Type 1, Style 10 - Common Nails Size Length length Min Max Diameter Min Max Head Min Max Cnt/# 2d 1" d 1 1/4" d 1 1/2" d 1 3/4" d 2" d 2 1/4" d 2 1/2" d 2 3/4" d 3" d 3 1/4" d 3 1/2" d 4" d 4 1/2" d 5" d 5 1/2" d 6" Length measured under the head, length tolerance, +/- 1/16 1 to 2 ½, +/- 3/32 over 2 ½
2 Specifications - CC Sinkers Diamond point, flat countersunk checkered head, round smooth shank, resin, phosphate or vinyl coating ASTM F Table 11 Type 1, Style 8 - Sinker Nails Size Length length Min Max Diameter Min Max Head Min Max Cnt/# 3d 1 1/8" d 1 3/8" d 1 5/8" d 1 7/8" d 2 1/8" d 2 3/8" d 2 7/8" d 3 1/8" d 3 1/4" d 3 3/4" d 4 1/4" d 4 3/4" d 5 3/4" Length measured overall, length tolerance, +/- 1/16 1 to 2 ½, +/- 3/32 over 2 ½ - Fasteners must be true to shape, well finished, free from imperfections, clean, free of corrosion and uniformly coated with green vinyl or resin and shall not be tacky or gummy.
3 Specifications Roofing Nails Diamond point, Flat head, round smooth, ringed or barbed shank, Bright, HDG or EG finish ASTM F Table 29 Type 1, Style 20 - Roofing Nails Length length Min Max Diameter Min Max Head Min Max Cnt/# 3/4" /8" " /4" /2" /4" " /2" " Length measured under the head, length tolerance, +/- 1/16 1 to 2 ½, +/- 3/32 over 2 ½ - Head diameter tolerance, +/- 10% of nominal head diameter, the difference between the long axis and the short axis cannot exceed 20% of the short axis.
4 Specifications - Cupped Head Casing Nails Diamond point, Flat countersunk cupped head, round smooth shank, Bright, HDG or EG finish ASTM F Table 9 Type 1, Style 6 - Casing Nails Size Length length Min Max Diameter Min Max Head Min Max Cnt/# 2d 1" d 1 1/4" d 1 1/2" d 1 3/4" d 2" d 2 1/4" d 2 1/2" d 2 3/4" d 3" d 3 1/4" d 3 1/2" Length measured overall, length tolerance, +/- 1/16 1 to 2 ½, +/- 3/32 over 2 ½ - Head diameter tolerance, +/- 10% of nominal head diameter, the difference between the long axis and the short axis cannot exceed 10% of the short axis. - Fasteners must be true to shape, well finished, free from imperfections, clean, free of corrosion and uniformly coated with green vinyl or resin and shall not be tacky or gummy.
5 Specifications - Ring Shank Pole Barn Nails R/S Pole Barn Nails (Post Frame Shank Nails) Diamond point, Flat head, round mechanically deformed ring shank, Bright or HDG, Stiff Stock or HT ASTM F Table 45 Type 1, Style 30 - Post-Frame Ring Shank Nails THREAD THREAD LENGTH DIAMETER HEAD THREAD HEIGHT ROOT LENGTH THREAD SPACING L L Min Max D Min Max H Min Max T1 Min T1 Max Diameter Min P Min P Max 3" /2" /2" " /2" " /2" " " " Nail bending yield for low to medium carbon steel nails and spikes.177 to.254 diameter = 80,000 psi Nail bending yield for medium carbon steel nails and spikes hardened.142 to.192 diameter = 115,000 psi Nail bending yield for medium carbon steel nails and spikes hardened.192 to.207 diameter = 100,000 psi - Material: Steel wire (low-carbon, medium-low carbon, medium-carbon unhardened or medium carbon hardened - Length measured under the head, length tolerance, +/- 1/16 1 to 2 ½, +/- 3/32 over 2 ½ to 7", +/- 1/8" over 7" - Root diameter is a calculated value and not meant to be measured - Bend angle for hardened nails is 20 degrees, 180 degrees for unhardened low to medium carbon steel - Hot Dipped Galvanized meeting ASTM A 153 class D minimum (42 microns minimum zinc thickness)
6 Specifications - Spiral Concrete Nails Hardened, Diamond point, Flat countersunk head, spiral deformed shank, Bright or MG class 50 Reference ASTM F Table 24 Type 1, Style 17 - Masonry Nails Length length Min Max Diameter Min Max Head Min Max Cnt/# 3/4" " /4" /2" /4" " /2" " /2" " Material: Steel wire suitable to be hardened to minimum hardness of 37 HRC. - Length measured overall, length tolerance, +/- 1/32" 1" and under, +/- 1/16 over 1 to 2 ½, +/- 3/32 over 2 ½
7 Specifications Square Cut masonry Hardened, sheared from medium carbon sheet steel and shall have a wedged-shape shank with a square point end narrower than th upset head end. They shall have a flat head, bright finish or MG class 50 Reference ASTM F Table 53 Type III, Style 1 - Common (Cut) Spikes Length length Min Max Cnt/# 4d d d d d d d Material: Steel wire suitable to be hardened to minimum hardness of 37 HRC. - Length measured overall, length tolerance, +/- 1/32" 1" and under, +/- 1/16 over 1 to 2 ½, +/- 3/32 over 2 ½
8 Specifications - Cupped Head Finish Nails Diamond point, Brad head, round smooth shank, Bright, HDG or EG finish ASTM F Table 20 Type 1, Style 14 - Finish Nails Size Length length Min Max Diameter Min Max Head Min Max Cnt/# 2d 1" d 1 1/4" d 1 1/2" d 1 3/4" d 2" d 2 1/4" d 2 1/2" d 2 3/4" d 3" d 3 1/4" d 3 1/2" d 4" Length measured overall, length tolerance, +/- 1/16 1 to 2 ½, +/- 3/32 over 2 ½ - Fasteners must be true to shape, well finished, free from imperfections, clean, free of corrosion and uniformly coated with green vinyl or resin and shall not be tacky or gummy.
9 Specifications Duplex (double head) Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F Table 18 Type 1, Style 12 - Double Headed Nails Bottom head wire lower Upper Between Size Length length Min Max Diameter Min Max Head Min Max Head Min Max Heads Cnt/# 6d 1 3/4" /4" 160 8d 2 1/4" /4" 90 10d 2 3/4" /16" 59 12d /16" 56 16d /8" 45 20d 3 1/2" /8" 28 30d 4" /16" 22 - Length measured under the head, length tolerance, +/- 1/16 1 to 2 ½, +/- 3/32 over 2 ½
10 Specifications - Joist Hanger Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F Common nails, 1 1/4" 8d common wire ga and head size, 1 1/2" 10d common wire ga and head size HDG meets ASTM A153 Class D Length length Min Max Diameter Min Max Head Min Max Head Min Max 1 1/4" /2" Length measured under the head, length tolerance, +/- 1/16 1 to 2 ½, +/- 3/32 over 2 ½
11 Specifications - Box Nails Diamond point, Flat head, round smooth shank or ringed shank, Bright, cement coated, HDG, EG finish ASTM F Table 6 Type 1, Style 4A - Box Nails INCHES Size Length length Min Max Diameter Min Max Head Min Max Cnt/# 2d 1" d 1 1/4" d 1 1/2" d 1 3/4" d 2" d 2 1/4" d 2 1/2" d 2 3/4" d 3" d 3 1/4" d 3 1/2" d 4" d 4 1/2" d 5" Length measured under the head, length tolerance, +/- 1/16 1 to 2 ½, +/- 3/32 over 2 ½
GloEx Product List Assessment-Nail Selection
Item 01 Common Nail Bright Finish/HDG Flat Smooth/Ring FOR GENERAL CONSTRUCTION, CARPENTRY AND FRAMING. MADE TO CONFORM TO ASTM F1667. : Electrogalvanized option available Package s 3D 1-1/4" 14 13/64"
More informationStandard Specification for Driven Fasteners: Nails, Spikes, and Staples 1
Designation: Standard Specification for Driven Fasteners: Nails, Spikes, and Staples 1 This standard is issued under the fixed designation F1667; the number immediately following the designation indicates
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: NAILS REPORT HOLDER: MiTek USA, INC.
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3768 Reissued 08/2017 This report is subject to renewal 08/2019. DIVISION: 06 00
More informationFASTENERS BUILDING DEPARTMENT
FASTENERS BUILDING DEPARTMENT 952-446-1660 WWW.CITYOFMINNETRISTA.COM This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances, and
More informationNails, Fasteners, Connectors, and Framing
Nails, Fasteners, Connectors, and Framing Nails To order Nail Sizes Nail length is often referred to as d or penny. For example a 10-D nail or a 10 Penny Nail. Use the following chart for nail length reference.
More informationproduct catalog packaged Nails & screws
Distributed by: BEST MATERIALS Ph: 8004747570, 6022728128 Fax: 6022728014 www.bestmaterials.com Email: Sales@BestMaterials.com packaged Nails & screws www.nationalnail.com product catalog contents program
More informationHex Cap Screws Coarse & Fine Thread
INDUSTRIAL Product Description Hex head cap screws are manufactured to dimensional standards of ASME B18.2.1 and to various material and mechanical standards of ASTM and SAE. The length of a cap screw
More information4) Verify that the size of the supporting member can accommodate the connector s specified fasteners.
DESIGN NOTES 1) Allowable loads for more than one direction for a single connection cannot be added together. A design load which can be divided into components in the directions given must be evaluated
More information(c) 2016, American Fastening Systems, Maplewood, MN 55109, Ph , Ph
We offer a wide range of screws in 1lb and 5lb buckets, along with bulk boxes. We have planogram offerings from 4ft to 16ft ready to ship. We can tailor any WoodPro planogram for each unique market. If
More informationFastener Schedule. a, b, c. FASTENER Roof 3-8d (2 1 / ) / ) 3-10d. 3-10d ( ) 3-16d box nails. (3 1 2 toe nails on one side
ITEM 1 DESCRIPTION OF BUILDING ELEMENTS Blocking between joists or rafters to top plate, toe 2 Ceiling joists to plate, toe 3 4 5 6 Ceiling joists not attached to parallel rafter, laps over partitions,
More informationLetter of Transmittal/Submittal
Letter of Transmittal/Submittal FROM: TO: Baker Concrete Construction 1904 Jasper Street DATE JOB NUMBER 09/23/10 Aurora, CO 80011 9921 303.367.8111 ATTENTION Nick Dewald 937.536.9000 RE: Bruce Herman
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: NAILS REPORT HOLDER: TREE ISLAND INDUSTRIES, LTD.
0 Most Widely Accepted and Trusted ICC-E Evaluation Report ICC-E 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ER-1768 Reissued 08/2017 This report is subject to renewal 08/2018. DIVIION: 06 00 00 WOOD,
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationTrusted ICC ES PASLODE, Evaluation. report, or as to any. ICC-ES Evaluation
0 ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg Most Widely Accepted and Trusted ESR 3072 Reissued 09/2018 Revised 10/2018 This report is subject to renewal 09/2020.
More informationPART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
More informationICC-ES Evaluation Report
ICC-ES Evaluation Report ESR-6 Reissued April, 009 This report is subject to re-examination in two years. www.icc-es.org (800) 4-6587 (56) 699-054 A Subsidiary of the International Code Council DIVISION:
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt.
Structural Bolting ASTM F3125/F3125M is a structural bolt specification covering inch and metric bolt grades. This specification contains 4 inch series bolting grades: A325, F1852, A490, and F2280. These
More informationX-ECT MX Electrical Cable Tie, X-EKS MX and X-EMTSC Conduit Clip Fastener
D X-ECTMX, X-EKSMX, X-ECT MX Electrical Cable Tie, X-EKS MX and Conduit Clip Fastener Product data Dimensions X-ECT MX X-EKS MX X-EKSC MX 18 X-GHP 20 X-GN 27 X-EGN 14 X-U 16/22/27 4 12.5 24.5 19 24.9 14
More informationSD Screw #10x2½" 16dx2½" SD Screw #9x2½" SD Screw 10dx1½" 8d Common N54A 0.25" 0.131"
DESIGNED FOR FASTENER TYPES Fastener Types and s Specified for Simpson Strong-Tie Connectors Many Simpson Strong-Tie connectors have been designed and tested for use with specific types and sizes of fasteners.
More informationDECKS. Stairway illumination Positive attachment of ledger Lateral load connection required board (R507.2) required (R ) (R311.7.
DECKS Max. riser height-7 ¾ Min. tread depth-10 Landings required at (R311.7.5.1) (R311.7.5.2) top and bottom of stairs (R311.7.6) Notched guardrail post NOT allowed Graspable handrail required Spacing
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationEvaluation of In-Pavement Light Fixture Designs and Performance
Evaluation of In-Pavement Light Fixture Designs and Performance Presented to: IES ALC Fall Technology Meeting By: Joseph Breen Date: Background In-Pavement Light Fixture Assemblies Utilize a Circle of
More informationContinuous Fastener Galvanizing
Continuous Fastener Galvanizing The Continuous Fastener Galvanizing Process The Products it can produce The Markets it will service The Economics of the process The Investment required The Future Potential
More informationSECTION CONCRETE ANCHORING. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 03 15 00 CONCRETE ANCHORING Display hidden notes to specifier. (Don't know how? Click Here) A. General purpose mechanical anchors for horizontal and vertical
More informationX-EKB, X-ECH Electrical Cable Fasteners
X-EKB, X-ECH Electrical Cable Fasteners Product data Dimensions Single Fastener X-EKB 8/4-FR X-EKB 16 (FR) X-U 37 PH 1 2 4 o8.15 16.8 10 21.5 34 136/104 16.8 10 25 229 o3.7 37 49 o11.8 X-ECH-S (FR) X-ECH-M
More informationCoatings ASTM B117 SST Salt Spray Test Kesternick Phosphate Zinc E-Coat Dip Spin Coatings
Head and Thread types Coatings ASTM B117 Two major types of coating tests: SST Salt Spray Test screws are placed in a container and a salt solution is sprayed on the screws for a number of hours, checking
More informationSECTION STEEL LIGHTING STANDARDS. 1. Electrical conduit and fittings; Section
02760-1 of 5 SECTION 02760 STEEL LIGHTING STANDARDS 02760.01 GENERAL A. Description Steel lighting standards shall include, but not necessarily be limited to, furnishing and installing steel lighting poles,
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: NAILS REPORT HOLDER: ASTROTECH STEELS PRIVATE LIMITED
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3507 Reissued 03/2018 This report is subject to renewal 03/2020. DIVISION: 06 00
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2761 Reissued 10/2017 This report is subject to renewal 10/2019. DIVISION: 06 00
More informationAttach Trusses and Rafters Faster
Attach Trusses and Rafters Faster SDWC TRUSS Screw Truss-to-Plate Connections For Truss-to-Plate Connections The Strong-Drive SDWC TRUSS screw provides a truss- and rafter-to-top-plate connection. The
More informationACCENT BUILDINGMATERIALS BUILDING STRONG PARTNERSHIPS GENERAL CONSTRUCTION DRYWALL/ACOUSTICAL ROOFING CONCRETE ACCESSORIES SPECIALTY ITEMS & MORE
ACCENT BUILDINGMATERIALS BUILDING STRONG PARTNERSHIPS GENERAL CONSTRUCTION DRYWALL/ACOUSTICAL ROOFING CONCRETE ACCESSORIES SPECIALTY ITEMS & MORE Accent started in 985 and is the largest supplier of industrial
More informationMETRIC FASTENERS 1520 METRIC FASTENERS
1520 METRIC FASTENERS METRIC FASTENERS A number of American National Standards covering metric bolts, screws, nuts, and washers have been established in cooperation with the Department of Defense in such
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC AND COMPOSITE FASTENINGS REPORT HOLDER: EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3201 Reissued 07/2018 This report is subject to renewal 07/2019. DIVISION: 06 00
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 87 () 99 0 www.icc es.org ESR 9 Reissued 0/08 This report is subject to renewal 0/09. DIVISION: 0 00 00 WOOD, PLASTICS AND COMPOSITES
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationConnection Design Examples
Connection Design Examples Using the 2015 NDS (DES345) Lori Koch, P.E. Manager, Educational Outreach American Wood Council Adam Robertson, M.A.Sc., P.Eng. Manager, Codes and Standards Canadian Wood Council
More informationESR-2648 Reissued May 1, 2012 This report is subject to renewal June 1, 2013.
ICC-ES Evaluation Report ESR-2648 Reissued May 1, 2012 This report is subject to renewal June 1, 2013. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council DIVISION:
More informationConnection Solutions for Wood-frame Structures. Copyright Materials. Learning Objectives
Connection Solutions for Wood-frame Structures Presented by: John Buddy Showalter, P.E. Vice President, Technology Transfer The Wood Products Council is a Registered Provider with. Credit(s) earned on
More informationProfessional Quality FOR THE Professional Contractor. Marketing Offerings. 225 Elm Ave Galt, Ca bmdusa.com
Professional Quality FOR THE Professional Contractor Marketing Offerings Header Boards Professional Quality FOR THE Professional ContraCtor ID: QBHB3614 14" PVC Board Proudly Distributed by 36" Professional
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationX-EKB, X-ECH Electrical Cable Fasteners
X-EKB, X-ECH Electrical Cable Fasteners Product data Dimensions Single Fastener X-EKB 8/4-FR X-EKB 16 (FR) X-U 37 PH 1 2 4 o 8.15 16.8 10 21.5 34 136/104 16.8 10 25 229.7 37 49 o 11.8 X-ECH-S (FR) X-ECH-M
More informationSteel Nipples. Nipples & Fittings. Black and Galvanized Steel Nipples. Black and Galvanized. Steel Nipples. 142
PRODUCT SPECIFICATIONS Welded steel pipe nipples both galvanized an dblack in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe up to 120. TECHNICAL SPECIFICATIONS Standards:
More informationX-HS Threaded Hanger and X-CC Loop Hanger Systems
5, Threaded Hanger and oop Hanger Systems Product data Dimensions DKH À U Á U Â M5 7.5 25.5 10 o15 5 41 36 o 15 HITI 24 7 9.5 o 4 S dg 2 D o 4 12 1.5 8.5 4.5 o 4 8.5 DKH 48 P8S15 o8 o4 o15 X-U _ P8 Ø 8
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationThe Wood Products Council is a Registered Provider with. . Credit(s) earned on completion of this program will be
Connection Solutions for Wood-frame Structures Presented by: John Buddy Showalter, P.E. Vice President, Technology Transfer The Wood Products Council is a Registered Provider with. Credit(s) earned on
More informationFNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
More informationICC-ES Evaluation Report Reissued June 1, 2010 This report is subject to re-examination in one year.
ICC-ES Evaluation Report ESR-2648 Reissued June 1, 2010 This report is subject to re-examination in one year. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council
More informationDIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast.
DIRECT FASTENING SYSTEMS. Hilti. Outperform. Outlast. Powder-Actuated Tools and Fasteners DX - Light Tools DX 460-F8 Page 140 DX 460 MX Page 141 Consumables X-U, X-C, X-FS, X-HS U, X-M, X-EM Page 142 Insulation
More informationAttachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder. Installation Instructions Revised 9/2/2016
Attachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder Installation Instructions Revised 9/2/2016 SBCA has been the voice of the structural building components industry
More information10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS
10x12 FOUNDATION GUIDE 10x12 TRICO AND FLORA SHEDS 10x12 WOOD SKID FLOOR FLOOR SYSTEM FOR 10x12 TRICO AND FLORA SHEDS RAW MATERIALS LIST: 2 (9) FLOOR FRAMING AND SHEATHING: 1) BAND BOARD 2 x 6 x 12 PRESSURE
More informationHang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
More informationGovernment Recognized Export House OHSAS 18001:2007 ISO 14001:2004 PED Approved Company.
Government Recognized Export House OHSAS 800:200 ISO 400:2004 PED Approved Company. Phone : +9 22 44 (2 Lines) Fax : +9 22 289 4 Email : export@reliablepipes.com domestic@reliablepipes.com Designation:
More informationLateral Support. Decks over 24 above grade require lateral support* *Exceptions to be discussed later
Lateral Support Decks over 24 above grade require lateral support* *Exceptions to be discussed later Decking Types of Decking: -2x4s & 2x6s -five quarter span rated decking boards -Wood plastic composite
More informationListing Report: AB Reissue Date: 01/21/16 This report is subject to annual review
Reissue Date: 01/21/16 CSI 06 05 23 PRODUCT: Threaded Fasteners DIVISION: Wood, Plastics, and Composites (06) SECTION: Wood, Plastic, and Composite Fastenings (05 23) Report Holder American Bolt and Screw
More informationAttachment of Residential Deck Ledger to Metal Plate Connected Wood Truss Floor Systems Overview Revised 9/2/2016
Attachment of Residential Deck Ledger to Metal Plate Connected Wood Truss Floor Systems Overview Revised 9/2/2016 SBCA has been the voice of the structural building components industry since 1983, providing
More informationD. Thermally Sprayed Metallic Coating (Flame Spray): STD SPEC
STANDARD SPECIFICATION SECTION 05121 MISCELLANEOUS METALWORK PART 1 - GENERAL 1.01 DESCRIPTION This section includes materials, fabrication, and installation of structural steel, connecting bolts, pipes,
More informationConnection Philosophy. p NDS Chapter-by-chapter description Changes from previous editions Examples. Part 1: Member Design Webinar.
Outline ASD and LRFD with the 2005 NDS Part 2 Connection Design Presented by: John Buddy Showalter, P.E. Vice President, Technology Transfer Connection philosophy p NDS Chapter-by-chapter description Changes
More informationSUBMITTAL SHEET. Project Submittals by
Galvanized Tie Wire and Hanger Wire Submittal of Product Performance SUBMITTAL SHEET Project Submittals by GRABBER CONSTRUCTION PRODUCTS, INC. Submittal Date: Contract Number: Project Name: Section Number:
More informationWoven Steel Wire Fence Type-47. Under the state specification for fencing, ASTM A 116 is called out.
Woven Steel Wire Fence Type-47 Under the state specification 710.02 for fencing, ASTM A 116 is called out. Go to the steel and fencing certification manual for more information about the basic properties
More informationLoad Tables, Technical Data and Installation Instructions
W22. W22. W22. W22. W22 W22.. Simpson Strong-Tie Fastening Systems Structural Wood-to-Wood Connections Including Ledgers Designed to provide an easy-to-install, high-strength alternative to through-bolting
More informationIFRC SHELTER TOOL KIT
IFRC SHELTER TOOL KIT PP ROPE ROPE, polypropylene, black, 12mm diam., twisted Diameter: 12mm +/- 0.5mm Length: 30m Weight: 1.9kg Number of strand: 3 minimum Type: twisted Material: polypropylene, no recycled
More informationREPORT HOLDER: DEWALT 701 EAST JOPPA ROAD TOWSON, MARYLAND EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2024 Reissued 09/2017 This report is subject to renewal 09/2018. DIVISION: 03 00
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationChemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );
BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical
More informationInstallation Instructions
Installation Instructions SLICKER MAX RAINSCREEN Page List of Approved Compatible Products 2 Nail Selection Guide 3 General Installation 4 Top of Wall Detail 5 Bottom of Wall Detail 6 Wall Corner Detail
More informationESR-1799 Reissued June 1, 2009 This report is subject to re-examination in one year.
ICC-ES Evaluation Report ESR-799 Reissued June, 009 This report is subject to re-examination in one year. www.icc-es.org (800) -87 () 99-0 A Subsidiary of the International Code Council DIVISION: 0CONCRETE
More informationICC-ES Evaluation Report
ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-2608 Reissued January 2016 This report is subject to renewal January 2017. A Subsidiary of the International Code Council DIVISION:
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: NAILS SECTION: STAPLES REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 4 6587 (56) 699 054 www.icc es.org ESR 159 Reissued 07/018 This report is subject to renewal 07/00. DIVISION: 06 00 00 WOOD,
More informationESR-2024* Reissued September 1, 2011 This report is subject to renewal September 1, 2013.
ICC-ES Evaluation Report ESR-2024* Reissued September, 20 This report is subject to renewal September, 20. www.icc-es.org (800) 42-68 (62) 699-04 A Subsidiary of the International Code Council DIVISION:
More informationSheet Steel Facts. Most common head design for self-drilling, self-tapping screws.
Sheet Steel Facts Fastener Guide for Sheet Steel Building Products August, 2003 Fastener Materials Fasteners are manufactured from several materials and coatings. For the purpose of this fact sheet, the
More information24" max from each end of the ledger. See detail 6A & 6B, typ. both ends IRC R Ledger R507.2
NOTE: All exposed lumber to be pressure treated (P.T.) or decay resistant. Fasteners for P.T. wood shall be hot-dipped galv. or stainless steel, typical. see pages 2 & 5 for footings 8'-0" -10'-0" Beam
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 42 687 (62) 699 04 www.icc es.org ESR 2442 Reissued 0/208 This report is subject to renewal 0/209. DIVISION: 06 00 00 WOOD,
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationTech Guide. Screw Anchor Performance Why use a screw anchor? Ease in installation
Why use a screw anchor? Screw anchors are used in medium duty applications that normally require faster installation time, close concrete edge distance, close anchor spacing and removability of anchor.
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationeb^sv=qfj_bo UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233
eb^sv=qfj_bo UNIVERSITY OF WISCONSIN - STOUT COLLEGE OF SCIENCE TECHNOLOGY ENGINEERING & MATHEMATICS Architectural Technology AEC 233 Dr. Jason E. Charalambides fkqolar`qflk Heavy timber construction consists
More informationBX 3 system: fasteners for Interior Finishing, Mechanical and Electrical and Building Construction applications
Product data BX 3 system BX 3 system: fasteners for Interior Finishing, Mechanical and Electrical and Building Construction applications BX 3 battery-actuated direct fastening tools BX 3-ME BX 3-IF Fasteners
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2442 Reissued 10/2017 This report is subject to renewal 10/2018. DIVISION: 06 00
More informationHeckmann Building Products Inc. DOVETAIL SLOT AND ANCHORS SPECIFICATION SECTION MASONRY ANCHORS AND ACCESSORIES PART 1 GENERAL
Heckmann Building Products Inc. DOVETAIL SLOT AND ANCHORS SPECIFICATION MASONRY ANCHORS AND ACCESSORIES PART 1 GENERAL SECTION 04085 1.1 SECTION INCLUDES NOTE: Delete items below not required for project.
More informationGOST TUBING AND COUPLINGS
GOST 633-80 TUBING AND COUPLINGS Tubing is used for oil and gas production. Tubing shall be made seamless, plain- or upset end and couplings with high-seal connections. Coupling-free connections are possible.
More informationFasteners. Fastener. Chapter 18
Fasteners Chapter 18 Material taken from Mott, 2003, Machine Elements in Mechanical Design Fastener A fastener is any device used to connect or join two or more components. The most common are threaded
More informationREPORT HOLDER: SFS INTEC 1045 SPRING STREET WYOMISSING, PENNSYLVANIA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3870 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 05 00
More informationStandard Terminology of Nails for Use with Wood and Wood-Base Materials 1
Designation: F 547 06 Standard Terminology of Nails for Use with Wood and Wood-Base Materials This standard is issued under the fixed designation F 547; the number immediately following the designation
More informationSDWH TIMBER-HEX Screw
Simpson Strong-Tie Fastening Systems Structural Wood-to-Wood Connections, Including Ledgers Double-barrier coating provides corrosion resistance equivalent to hot-dip galvanization, making it suitable
More informationSPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS
UDC 621.882.211 [669.14.018.291] IS : 3757-1985 (Reaffirmed 2003) Edition 3.2 (1989-07) Indian Standard SPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS ( Second Revision ) (Incorporating Amendment Nos.
More informationComparable ISO Standard. Date of current standard/modified
Title Standard All-metal prevailing torque All-metal prevailing torque EN ISO EN ISO Comparable ISO Standard Date of current standard/modified 980 7042 27042 7042 1998-02 980 10513 30513 10513 1998-02
More informationTesting. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified.
907.01 Section 907. FENCING MATERIALS 907.01 General Requirements. Materials for use in fencing property, right-of-way and other installations must comply with this section. 907.02 Testing. Material testing
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2013 Hilti North American Product Technical Guide Volume 1 Direct Fastening. For complete details on this product, including data development, product specifications, general
More informationSCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
test TECHNICAL NOTE On Cold-Formed Steel Construction $5.00 Cold-Formed Steel Engineers Institute Washington, DC www.cfsei.org 866-465-4732 SCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
More informationeco-shake INSTALLATION INSTRUCTION
1 eco-shake INSTALLATION INSTRUCTION NOTE: Shuffling the eco-shakes during installation may be necessary to obtain a uniform color throughout the roof. Due to the natural wood content in the ecoshakes,
More informationTECHNICAL MANUAL. TERADOWEL and ULTRADOWEL. Reliable Dowel System for Floor Joints
TECHNICAL MANUAL TERADOWEL and ULTRADOWEL Reliable Dowel System for Floor Joints Version: PEIKKO GROUP 11/2018 TERADOWEL and ULTRADOWEL Reliable Dowel System for Floor Joints Dowels manufactured from high
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER: SCREW PRODUCTS, INC.
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3654 Reissued 09/2017 This report is subject to renewal 09/2018. DIVISION: 06 00
More informationX-P High Performance Nail for Fastening to Concrete and Wood to Steel applications
X-P High Performance Nail for Fastening to Concrete and Wood to Steel applications Product data X-P_ MX Ø 8.2 2.4 X-P_ P8 Ø 8.2 2.4 Ø 4.0 L s L L s L Ø 4.0 Features and Benefits A specially hardened fastener
More informationDIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER: DEWALT EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3042 Reissued 09/2018 This report is subject to renewal 09/2019. DIVISION: 06 00
More informationEast African Roofing Systems Ltd.
East African Roofing Systems Ltd. Iron Sheet Super Tiger sheets are made from pre-painted galvanized iron sheets and combines increased longevity with low maintenance costs. Super Tigersheets are suitable
More informationLEGACY REPORT. (800) (562) A Subsidiary of the International Code Council. *Revised September 2003
ICC-ES Evaluation Report ER-580* Reissued January 00 www.icc-es.org (800) 4-6587 (56) 699-054 A Subsidiary of the International Code Council Legacy report on the 997 Uniform Building Code DIVISION: 05
More informationESR-1799 Reissued April 2014 This report is subject to renewal June 1, 2015.
ICC-ES Evaluation Report www.icc-es.org (800) 42-6587 (562) 699-054 ESR-799 Reissued April 204 This report is subject to renewal June, 205. A Subsidiary of the International Code Council DIVISION: 0 00
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More information3.1 General Provisions
WOOD FRAME CONSTRUCTION MANUAL 107 3.1 General Provisions 3.1.1 Prescriptive Requirements The provisions of this Chapter establish a specific set of resistance requirements for buildings meeting the scope
More informationIndian Standard SPECIFICATION FOR USE IN FOUNDRIES. 1.1 This standard covers the requirements for chaplets for use in foundries.
Indian Standard SPECIFICATION FOR USE IN FOUNDRIES 1. SCOPE 1.1 This standard covers the requirements for chaplets for use in foundries. 2. SUPPLY OF MATERIAL 2.1 General requirements relating to the supply
More information