Specificaions and descripion RKR 53 Rero-reflecive phooelecric sensor for foils Dimensioned drawing en 04-2012/06 50108252-01 1 khz 0 1.8m 10-30 V DC We reserve he righ o make changes DS_RKR53642_en_50108252-01.fm Rero-reflecive phooelecric sensor, auocollimaion opics wih visible red ligh Paricularly suied for hin, highly ransparen foils wih hickness < 20μm 316L sainless seel housing in HYGIENE- Design Enclosed opics design prevens bacerial carry-overs ECOLAB and CleanProof+ esed Paperless device idenificaion Scrach resisan and non-diffusive plasic fron cover High swiching frequency for deecion of fas evens May also be used wih glass reflecors (TG) Easy adjusmen via lockable each buon or each inpu U L US C LISTED IEC 60947... IEC 60947... Accessories: (available separaely) IP 69K IP 67 HYGIENE Cables wih M8 or M12 connecor (K-D ) Cables for food and beverages Reflecors for he foods indusry Reflecors for he pharmaceuical indusry Reflecive apes Mouning devices A Teach buon B Opical axis C Indicaor diodes D Permissible clamping range Elecrical connecion Plug connecion, 4-pin (wih/wihou cable) Plug connecor, 3-pin
RKR 53 Specificaions Opical daa Typ. op. range limi (TK(S) 100x100) 1) 0 1.8m Operaing range 2) see ables Ligh source 3) (modulaed ligh) Wavelengh 620nm (visible red ligh) Timing Swiching frequency 1000Hz Response ime 0.5ms Delay before sar-up 300ms Elecrical daa Operaing volage U 4) B 10 30VDC (incl. residual ripple) Residual ripple 15% of U B Open-circui curren 15mA Swiching oupu /6.42 1 push-pull swiching oupu pin 4: PNP ligh swiching, NPN dark swiching pin 2: each inpu Funcion characerisics ligh/dark reversible Signal volage high/low (U B -2V)/ 2V Oupu curren max. 100mA Operaing range seing via each-in Indicaors Green ready Yellow ligh pah free Mechanical daa Housing AISI 316L sainless seel, DIN X2CrNiMo17132, W.No1.4404 Housing design HYGIENE-Design Housing roughness 5) Ra 2.5 Connecor AISI 316L sainless seel, DIN X2CrNiMo17132, W.No1.4404 Opics cover coaed plasic (PMMA), scrach resisan and non-diffusive Operaion plasic (TPV-PE), non-diffusive Weigh wih M8 connecor: 50g wih 200mm cable and M8 connecor: 60g Connecion ype M8 connecor, 4-pin or 3-pin 0.2m cable wih M8 connecor, 4-pin Fasening via fi (see "Remarks") Max. ighening orque 3 Nm (permissible range, see dimensioned drawing) Environmenal daa Ambien emp. (operaion/sorage) 6) -30 C +70 C/-30 C +70 C Proecive circui 7) 2, 3 VDE safey class 8) III Proecion class IP 67, IP 69K 9) Environmenally esed acc. o ECOLAB, CleanProof+ class 1 (in accordance wih EN 60825-1) Sandards applied IEC 60947-5-2 Cerificaions UL 508 4) Chemical resisance esed in accordance wih ECOLAB and CleanProof+ (see Remarks) Opions Teach-in inpu/acivaion inpu Transmier acive/no acive 8V/ 2V Acivaion/disable delay 1ms Inpu resisance 30k 1) Typ. operaing range limi: max. aainable range wihou performance reserve 2) Operaing range: recommended range wih performance reserve 3) Average life expecancy 100,000h a an ambien emperaure of 25 C 4) For UL applicaions: for use in class 2 circuis according o NEC only 5) Typical value for he sainless seel housing 6) Operaing emperaures of +70 C permissible only briefly ( 15min) 7) 2=polariy reversal proecion, 3=shor circui proecion for all ransisor oupus 8) Raing volage 50V 9) Only wih inernal ube mouning of he M8 connecor Tables Reflecors in food qualiy TK TKS MTKS Operaing range 1 TK(S) 100x100 0 1.5m 2 TK 40x60 0 1.0m 3 MTKS 50x50.1 0 1.0m 4 Tape 6 50x50 0 0.6m 5 TK 20x40 0 0.5m 1 0 1.5 1.8 2 0 1 1.2 3 0 1 1.2 4 0 0.6 0.7 5 0 0.5 0.6 Pharmaceuical reflecors Operaing range 1 TK(S) 40x60.P 0 0.6m 2 TK BR53 0 0.4m 3 TK(S) 20x40.P 0 0.35m 4 TK(S) 20.P 0 0.25m 5 MTK(S) 14x23.P 0 0.15m 6 TK 10.P 0 0.1m 1 0 0.6 0.7 2 0 0.4 0.5 3 0 0.35 0.42 4 0 0.25 0.3 5 0 0.15 0.18 6 0 0.1 0.12 Operaing range [m] Typ. operaing range limi [m] = adhesive = screw ype = micro riple, screw ype Diagrams Misalignmen y [mm] 30 20 10 0-10 -20-30 0 0,5 1 1,5 2 Disance x [m] x Typ. response behavior y2 y1 Remarks A lis of esed chemicals can be found in he firs par of he produc descripion. Only secure in designaed area using se screw. Max. ighening orque 3Nm. y2 y1 Approved purpose This produc may only be used by qualified personnel and mus only be used for he approved purpose. This sensor is no a safey sensor and is no o be used for he proecion of persons.
RKR 53 Rero-reflecive phooelecric sensor for foils Order guide Selecion able Equipmen Order code Swiching oupu 1 x push-pull swiching oupu Swiching funcion ligh/dark swiching configurable Connecion M8 connecor, meal, 4-pin cable 200mm wih M8 connecor, 4-pin M8 connecor, meal, 3-pin Configuraion each-in via buon (lockable) and each inpu 1) Indicaors : ready yellow : swiching oupu Deecion foils < 20μm hick foils > 20μm hick boles (PET and glass) 1) Teach inpu no presen wih 3-pin connecor RKR 53/6.42-S8 Par no. 50107607 RKR 53/6.42, 200-S8 Par no. 50105790 RKR 53/6.42-S8.3 Par no. 50107608 General informaion The sensor is facory-adjused for he deecion of colored glass. Recommendaion: each only if he desired objecs are no reliably deeced. The ligh spo may no exceed he reflecor. Preferably use MTK(S) or ape 6. For foil 6, he sensor's side edge mus be aligned parallel o he side edge of he reflecive ape. For reflecing objecs, he sensor has o be mouned approx. 5 angular owards he objec. Sensor adjusmen (each) via each buon Prior o eaching: Clear he ligh pah o he reflecor! The device seing is sored in a fail-safe way. A reconfiguraion following volage inerrupion or swich-off is hus no required. 5
RKR 53 Sandard eaching for average sensor sensiiviy (sandard boles) Press each buon unil boh s flash simulaneously. Release each buon. If he receive signal from he reflecor is oo weak, he sensor indicaes he error saus by means of fas and simulaneous flashing of he and yellow s. Please check he alignmen, operaing range, and soiling and carry ou anoher eaching. 2 7s simulaneously flashing a yellow Teach for increased sensor sensiiviy (highly ransparen boles and foils wih hickness < 20μm) Press each buon unil boh s flash alernaingly. Release each buon. If he receive signal from he reflecor is oo weak, he sensor indicaes he error saus by means of fas and simulaneous flashing of he and yellow s. Please check he alignmen, operaing range, and soiling and carry ou anoher eaching. 7 12s alernaingly flashing a yellow Adjusing he swiching behavior of he swiching oupu ligh/dark swiching Press each buon unil he flashes. The yellow displays he curren seing of he swiching oupu: ON = oupu swiches on ligh OFF = oupu swiches on dark Coninue o press he each buon in order o change he swiching behavior. Release each buon. >12s flashes a Yellow ON = ligh swiching OFF = dark swiching
RKR 53 Rero-reflecive phooelecric sensor for foils Locking he each buon via he each inpu A saic high signal ( 4ms) a he each inpu locks he each buon on he device if required, such ha no manual operaion is possible (e.g., proecion from erroneous operaion or manipulaion). If he each inpu is no conneced or if here is a saic low signal, he buon is unlocked and can be operaed freely. Sensor adjusmen (each) via each inpu The following descripion applies o PNP swiching logic! 2V (U B -2V) Prior o eaching: Clear he ligh pah o he reflecor! The device seing is sored in a fail-safe way. A reconfiguraion following volage inerrupion or swich-off is hus no required. Sandard eaching for average sensor sensiiviy (sandard boles) Afer he delay before sar-up ( 300ms) has elapsed, he each buon on he device can be operaed. The each buon is disabled afer he 1s edge. Teach1 4... 1000 ms Sandard each: Teach1 = 4 1000ms Afer abou 4ms, he curren each value is applied, each process compleed. The buon remains disabled unil he nex signal change. Teach buon may now be operaed again. Quick sandard each (sandard boles) 4 ms 4 ms 4 ms shores eaching duraion for sandard eaching: approx. 12ms If he receive signal from he reflecor is oo weak, he sensor indicaes he error saus by means of fas and simulaneous flashing of he and yellow s. Please check he alignmen, operaing range, and soiling and carry ou anoher eaching.
RKR 53 Teach for increased sensor sensiiviy (highly ransparen boles and foils wih hickness < 20μm) Afer he delay before sar-up ( 300ms) has elapsed, he each buon on he device can be operaed. The each buon is disabled afer he 1s edge. Teach2 1000... 2000 ms Teach for increased sensor sensiiviy: Teach2 = 1000 2000ms Afer abou 4ms, he curren each value is applied, each process compleed. The buon remains disabled unil he nex signal change. Teach buon may now be operaed again. If he receive signal from he reflecor is oo weak, he sensor indicaes he error saus by means of fas and simulaneous flashing of he and yellow s. Please check he alignmen, operaing range, and soiling and carry ou anoher eaching. Adjusing he swiching behavior of he swiching oupu ligh/dark swiching Teach Oupu 2000... 3000 ms p ligh 4... 1000 ms Teach Oupu 2000... 3000 ms p dark 1000... 2000 ms Afer he delay before sar-up ( 300ms) has elapsed, he each buon on he device can be operaed. The each buon is disabled afer he 1s edge. Seing he swiching behavior of he swiching oupu: Teach Oupu = 2000 3000ms Swiching oupu swiches on ligh: p ligh = 4 1000ms Swiching oupu swiches on dark: p dark = 1000 2000ms The buon remains disabled unil he nex signal change.
Specificaions and descripion PRK 53 Rero-reflecive phooelecric sensor wih polarizaion filer for boles Dimensioned drawing en 04-2012/06 50112986-01 1 khz 0 3.5m 10-30 V DC We reserve he righ o make changes DS_PRK5342_en_50112986-01.fm Polarized rero-reflecive phooelecric sensor, auocollimaion opics wih visible red ligh Paricularly suied for highly ransparen boles (PET and glass) 316L sainless seel housing in HYGIENE- Design Enclosed opics design prevens bacerial carry-overs ECOLAB and CleanProof+ esed Paperless device idenificaion Scrach resisan and non-diffusive plasic fron cover High swiching frequency for deecion of fas evens Easy adjusmen via lockable each buon or each inpu U L US C LISTED IEC 60947... IEC 60947... Accessories: (available separaely) IP 69K IP 67 HYGIENE Cables wih M8 or M12 connecor (K-D ) Cables for food and beverages Reflecors for he foods indusry Reflecors for he pharmaceuical indusry Reflecive apes Mouning devices A Teach buon B Opical axis C Indicaor diodes D Permissible clamping range Elecrical connecion Plug connecion, 4-pin (wih/wihou cable) Plug connecor, 3-pin
PRK 53 Specificaions Opical daa Typ. op. range limi (TK(S) 100x100) 1) 0 3.5m Operaing range 2) see ables Ligh source 3) (modulaed ligh) Wavelengh 620nm (visible red ligh, polarized) Timing Swiching frequency 1000Hz Response ime 0.5ms Delay before sar-up 300ms Elecrical daa Operaing volage U 4) B 10 30VDC (incl. residual ripple) Residual ripple 15% of U B Open-circui curren 18mA Swiching oupu /6.42 1 push-pull swiching oupu pin 4: PNP ligh swiching, NPN dark swiching pin 2: each inpu /6D.42 1 push-pull swiching oupu pin 4: PNP dark swiching, NPN ligh swiching pin 2: each inpu Funcion characerisics ligh/dark reversible Signal volage high/low (U B -2V)/ 2V Oupu curren max. 100mA Operaing range seing via each-in Indicaors Green ready Yellow ligh pah free Yellow, flashing ligh pah free, no performance reserve 5) Mechanical daa Housing AISI 316L sainless seel, DIN X2CrNiMo17132, W.No1.4404 Housing design HYGIENE-Design Housing roughness 6) Ra 2.5 Connecor AISI 316L sainless seel, DIN X2CrNiMo17132, W.No1.4404 Opics cover coaed plasic (PMMA), scrach resisan and non-diffusive Operaion plasic (TPV-PE), non-diffusive Weigh wih M8 connecor: 50g wih 200mm cable and M8 connecor: 60g Connecion ype M8 connecor, 4-pin or 3-pin 0.2m cable wih M8 connecor, 4-pin Fasening via fi (see "Remarks") Max. ighening orque 3 Nm (permissible range, see dimensioned drawing) Environmenal daa Ambien emp. (operaion/sorage) 7) -30 C +70 C/-30 C +70 C Proecive circui 8) 2, 3 VDE safey class 9) III Proecion class IP 67, IP 69K 10) Environmenally esed acc. o ECOLAB, CleanProof+ class 1 (in accordance wih EN 60825-1) Sandards applied IEC 60947-5-2 Cerificaions UL 508 4) Chemical resisance esed in accordance wih ECOLAB and CleanProof+ (see Remarks) Opions Teach-in inpu/acivaion inpu Transmier acive/no acive 8V/ 2V Acivaion/disable delay 1ms Inpu resisance 30k 1) Typ. operaing range limi: max. aainable range wihou performance reserve 2) Operaing range: recommended range wih performance reserve 3) Average life expecancy 100,000h a an ambien emperaure of 25 C 4) For UL applicaions: for use in class 2 circuis according o NEC only 5) Display "no performance reserve" as yellow flashing is only available in sandard each seing 6) Typical value for he sainless seel housing 7) Operaing emperaures of +70 C permissible only briefly ( 15min) 8) 2=polariy reversal proecion, 3=shor circui proecion for all ransisor oupus 9) Raing volage 50V 10)Only wih inernal ube mouning of he M8 connecor Remarks The ligh spo may no exceed he reflecor. Preferably use MTK(S) or ape 6. For foil 6, he sensor's side edge mus be aligned parallel o he side edge of he reflecive ape. Approved purpose This produc may only be used by qualified personnel and mus only be used for he approved purpose. This sensor is no a safey sensor and is no o be used for he proecion of persons. Tables Reflecors in food qualiy TK TKS = adhesive = screw ype Operaing range 1 TK(S) 100x100 0 3.0m 2 TK 40x60 0 2.0m 3 MTKS 50x50.1 0 1.3m 4 Tape 6 50x50 0 1.2m 5 TK 20x40 0 1.0m 1 0 3 3.6 2 0 2.0 2.4 3 0 1.3 1.6 4 0 1.2 1.4 5 0 1.0 1.2 Pharmaceuical reflecors Operaing range 1 TK(S) 40x60.P 0 1.2m 2 TK BR53 0 1.0m 3 TK(S) 20x40.P 0 0.7m 4 TK(S) 20.P 0 0.5m 5 MTK(S) 14x23.P 0 0.25m 6 TK 10.P 0 0.2m 1 0 1.2 1.4 2 0 1.0 1.2 3 0 0.7 0.8 4 0 0.5 0.6 5 0 0.25 0.3 6 0 0.2 0.25 Operaing range [m] Typ. operaing range limi [m] Diagrams Misalignmen y [mm] Performance reserve Typ. response behavior 40 30 y2 20 10 0-10 -20 y1-30 -40 0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Disance x [m] 50 45 40 35 30 25 20 15 10 5 0 A B C D x y2 y1 0 0,5 1,0 1,5 2,0 3,0 3,5 TK 100x100 TKS 40x60 TKS 20x40 Tape 4: 50x50 Remarks Typ. performance reserve 2,5 Disance x [m] A B C D A lis of esed chemicals can be found in he firs par of he produc descripion. Only secure in designaed area using se screw. Max. ighening orque 3Nm.
PRK 53 Rero-reflecive phooelecric sensor wih polarizaion filer for boles Order guide Selecion able Order code Equipmen Swiching oupu 1 x push-pull swiching oupu Swiching funcion ligh swiching dark swiching ligh/dark swiching configurable Connecion M8 connecor, meal, 4-pin M8 connecor, meal, 3-pin cable 200mm wih M8 connecor, 4-pin Configuraion each-in via buon (lockable) and each inpu 1) Indicaors : ready + each sequence yellow : swiching oupu Deecion foils < 20μm hick foils > 20μm hick boles (PET and glass) 1) Teach inpu no presen wih 3-pin connecor PRK 53/6.42-S8 Par no. 50112475 PRK 53/6D.42-S8 Par no. 50112476 Sensor adjusmen (each) via each buon The sensor is facory-adjused for maximum operaing range. Recommendaion: each only if he desired objecs are no reliably deeced. Prior o eaching: Clear he ligh pah o he reflecor! The device seing is sored in a fail-safe way. A reconfiguraion following volage inerrupion or swich-off is hus no required. Teach for 11% sensor sensiiviy (highly ransparen boles and foils wih hickness > 20μm) Press each buon unil boh s flash simulaneously. Release each buon. Afer he eaching, he sensor swiches when abou 11% of he ligh beam are covered by he objec. 2 7s simulaneously flashing a yellow
PRK 53 Teach for 18% sensor sensiiviy (sandard boles) Press each buon unil boh s flash alernaingly. Release each buon. Afer he eaching, he sensor swiches when abou 18% of he ligh beam are covered by he objec. 7 12s alernaingly flashing a yellow Teaching for maximum operaing range (facory seing a delivery) Prior o eaching: Cover he ligh pah o he reflecor! Press each buon unil boh s flash simulaneously. Release each buon. yellow 2 7s simulaneously flashing a Adjusing he swiching behavior of he swiching oupu ligh/dark swiching Press each buon unil he flashes. The yellow displays he curren seing of he swiching oupu: ON = oupu swiches on ligh OFF = oupu swiches on dark Coninue o press he each buon in order o change he swiching behavior. Release each buon. >12s flashes a Yellow ON = ligh swiching OFF = dark swiching
PRK 53 Rero-reflecive phooelecric sensor wih polarizaion filer for boles Locking he each buon via he each inpu A saic high signal ( 4ms) a he each inpu locks he each buon on he device if required, such ha no manual operaion is possible (e.g., proecion from erroneous operaion or manipulaion). If he each inpu is no conneced or if here is a saic low signal, he buon is unlocked and can be operaed freely. Sensor adjusmen (each) via each inpu The following descripion applies o PNP swiching logic! 2V (U B -2V) Prior o eaching: Clear he ligh pah o he reflecor! The device seing is sored in a fail-safe way. A reconfiguraion following volage inerrupion or swich-off is hus no required. Teach for 11% sensor sensiiviy (highly ransparen boles and foils wih hickness > 20μm) Afer he delay before sar-up ( 300ms) has elapsed, he each buon on he device can be operaed. The each buon is disabled afer he 1s edge. Teach1 4... 1000 ms Sandard each: Teach1 = 4 1000ms Afer abou 4ms, he curren each value is applied, each process compleed. The buon remains disabled unil he nex signal change. Teach buon may now be operaed again. Quick each for 11% sensor sensiiviy (highly ransparen boles and foils wih hickness > 20μm) 4 ms 4 ms 4 ms Shores eaching duraion for his eaching: approx. 12ms Afer he eaching, he sensor swiches when abou 11% of he ligh beam are covered by he objec.
PRK 53 Teach for 18% sensor sensiiviy (sandard boles) Afer he delay before sar-up ( 300ms) has elapsed, he each buon on he device can be operaed. The each buon is disabled afer he 1s edge. Teach2 1000... 2000 ms Teach for increased sensor sensiiviy: Teach2 = 1000 2000ms Afer abou 4ms, he curren each value is applied, each process compleed. The buon remains disabled unil he nex signal change. Teach buon may now be operaed again. Afer he eaching, he sensor swiches when abou 18% of he ligh beam are covered by he objec. Adjusing he swiching behavior of he swiching oupu ligh/dark swiching Teach Oupu 2000... 3000 ms p ligh 4... 1000 ms Teach Oupu 2000... 3000 ms p dark 1000... 2000 ms Afer he delay before sar-up ( 300ms) has elapsed, he each buon on he device can be operaed. The each buon is disabled afer he 1s edge. Seing he swiching behavior of he swiching oupu: Teach Oupu = 2000 3000ms Swiching oupu swiches on ligh: p ligh = 4 1000ms Swiching oupu swiches on dark: p dark = 1000 2000ms The buon remains disabled unil he nex signal change.